blob: d3a38977e10f09b6b4abf47dd7f8d1c8e078c729 [file] [log] [blame]
Edward O'Callaghand11464d2014-03-24 23:09:23 +11001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
5[ 0.000000] Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201403 initrd=boot/x86_64/archiso.img
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7fccfff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000c7fcd000-0x00000000dfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
14[ 0.000000] NX (Execute Disable) protection: active
15[ 0.000000] SMBIOS 2.7 present.
16[ 0.000000] DMI: Jetway NF81-T56N-LF/NF81-T56N-LF, BIOS ap-jupiter-alpha 03/24/2014
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges enabled:
23[ 0.000000] 00000-9FFFF write-back
24[ 0.000000] A0000-BFFFF uncachable
25[ 0.000000] C0000-FFFFF write-back
26[ 0.000000] MTRR variable ranges enabled:
27[ 0.000000] 0 base 000000000 mask F80000000 write-back
28[ 0.000000] 1 base 080000000 mask FC0000000 write-back
29[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
30[ 0.000000] 3 disabled
31[ 0.000000] 4 disabled
32[ 0.000000] 5 disabled
33[ 0.000000] 6 base 0FFE00000 mask FFFE00000 write-protect
34[ 0.000000] 7 disabled
35[ 0.000000] TOM2: 000000019f000000 aka 6640M
36[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
37[ 0.000000] e820: last_pfn = 0xc7fcd max_arch_pfn = 0x400000000
38[ 0.000000] found SMP MP-table at [mem 0x000f0e00-0x000f0e0f] mapped at [ffff8800000f0e00]
39[ 0.000000] Scanning 1 areas for low memory corruption
40[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
41[ 0.000000] Using GB pages for direct mapping
42[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
43[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
44[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
45[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
46[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x19ee00000-0x19effffff]
48[ 0.000000] [mem 0x19ee00000-0x19effffff] page 2M
49[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19edfffff]
51[ 0.000000] [mem 0x19c000000-0x19edfffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff]
53[ 0.000000] [mem 0x180000000-0x19bffffff] page 2M
54[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7fccfff]
55[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
56[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
57[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
58[ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M
59[ 0.000000] [mem 0xc7e00000-0xc7fccfff] page 4k
60[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
61[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
62[ 0.000000] RAMDISK: [mem 0x7ed0f000-0x7fffffff]
63[ 0.000000] ACPI: RSDP 00000000000f0de0 000014 (v00 CORE )
64[ 0.000000] ACPI: RSDT 00000000c7fe2624 000040 (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: FACP 00000000c7fe4f90 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: DSDT 00000000c7fe26c8 002886 (v02 AMD COREBOOT 00010001 INTL 20140114)
67[ 0.000000] ACPI: FACS 00000000c7fe4f50 000040
68[ 0.000000] ACPI: HPET 00000000c7fe5088 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: APIC 00000000c7fe50c0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: HEST 00000000c7fe5120 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SSDT 00000000c7fe52c0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
72[ 0.000000] ACPI: SSDT 00000000c7fe6950 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
73[ 0.000000] ACPI: SSDT 00000000c7fe6d30 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
74[ 0.000000] ACPI: Local APIC address 0xfee00000
75[ 0.000000] No NUMA configuration found
76[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff]
77[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19effffff]
78[ 0.000000] NODE_DATA [mem 0x19eff9000-0x19effdfff]
79[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880198c00000-ffff88019e5fffff] on node 0
80[ 0.000000] Zone ranges:
81[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
82[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
83[ 0.000000] Normal [mem 0x100000000-0x19effffff]
84[ 0.000000] Movable zone start for each node
85[ 0.000000] Early memory node ranges
86[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
87[ 0.000000] node 0: [mem 0x00100000-0xc7fccfff]
88[ 0.000000] node 0: [mem 0x100000000-0x19effffff]
89[ 0.000000] On node 0 totalpages: 1470315
90[ 0.000000] DMA zone: 64 pages used for memmap
91[ 0.000000] DMA zone: 21 pages reserved
92[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
93[ 0.000000] DMA32 zone: 12736 pages used for memmap
94[ 0.000000] DMA32 zone: 815053 pages, LIFO batch:31
95[ 0.000000] Normal zone: 10176 pages used for memmap
96[ 0.000000] Normal zone: 651264 pages, LIFO batch:31
97[ 0.000000] ACPI: PM-Timer IO Port: 0x808
98[ 0.000000] ACPI: Local APIC address 0xfee00000
99[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
100[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
101[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
102[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
103[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
104[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
105[ 0.000000] ACPI: IRQ0 used by override.
106[ 0.000000] ACPI: IRQ2 used by override.
107[ 0.000000] ACPI: IRQ9 used by override.
108[ 0.000000] Using ACPI (MADT) for SMP configuration information
109[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
110[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
111[ 0.000000] nr_irqs_gsi: 40
112[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
113[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
114[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
115[ 0.000000] PM: Registered nosave memory: [mem 0xc7fcd000-0xdfffffff]
116[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
117[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff]
118[ 0.000000] PM: Registered nosave memory: [mem 0xf9000000-0xffffffff]
119[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
120[ 0.000000] Booting paravirtualized kernel on bare hardware
121[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
122[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88019ec00000 s86336 r8192 d24256 u1048576
123[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
124[ 0.000000] pcpu-alloc: [0] 0 1
125[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1447318
126[ 0.000000] Policy zone: Normal
127[ 0.000000] Kernel command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201403 initrd=boot/x86_64/archiso.img
128[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
129[ 0.000000] Checking aperture...
130[ 0.000000] No AGP bridge found
131[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
132[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
133[ 0.000000] Memory: 5691520K/5881260K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 189740K reserved)
134[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
135[ 0.000000] Preemptible hierarchical RCU implementation.
136[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
137[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
138[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
139[ 0.000000] NR_IRQS:8448 nr_irqs:512 16
140[ 0.000000] Console: colour VGA+ 80x25
141[ 0.000000] console [tty0] enabled
142[ 0.000000] allocated 23592960 bytes of page_cgroup
143[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
144[ 0.000000] hpet clockevent registered
145[ 0.000000] tsc: Fast TSC calibration using PIT
146[ 0.003333] tsc: Detected 1650.006 MHz processor
147[ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3301.51 BogoMIPS (lpj=5500020)
148[ 0.000012] pid_max: default: 32768 minimum: 301
149[ 0.000071] Security Framework initialized
150[ 0.000092] AppArmor: AppArmor disabled by boot time parameter
151[ 0.000094] Yama: becoming mindful.
152[ 0.001165] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
153[ 0.007305] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
154[ 0.010145] Mount-cache hash table entries: 256
155[ 0.010581] Initializing cgroup subsys memory
156[ 0.010600] Initializing cgroup subsys devices
157[ 0.010603] Initializing cgroup subsys freezer
158[ 0.010607] Initializing cgroup subsys net_cls
159[ 0.010611] Initializing cgroup subsys blkio
160[ 0.010656] tseg: 0000000000
161[ 0.010669] CPU: Physical Processor ID: 0
162[ 0.010672] CPU: Processor Core ID: 0
163[ 0.010675] mce: CPU supports 6 MCE banks
164[ 0.010692] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
165Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
166tlb_flushall_shift: 5
167[ 0.010863] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
168[ 0.013203] ACPI: Core revision 20131115
169[ 0.017302] ACPI: All ACPI Tables successfully acquired
170[ 0.017315] ftrace: allocating 21057 entries in 83 pages
171[ 0.038602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
172[ 0.071640] smpboot: CPU0: AMD G-T56N Processor (fam: 14, model: 02, stepping: 00)
173[ 0.176192] Performance Events: AMD PMU driver.
174[ 0.176202] ... version: 0
175[ 0.176205] ... bit width: 48
176[ 0.176207] ... generic registers: 4
177[ 0.176210] ... value mask: 0000ffffffffffff
178[ 0.176212] ... max period: 00007fffffffffff
179[ 0.176215] ... fixed-purpose events: 0
180[ 0.176217] ... event mask: 000000000000000f
181[ 0.193188] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
182[ 0.199945] x86: Booting SMP configuration:
183[ 0.199954] .... node #0, CPUs: #1
184[ 0.213201] x86: Booted up 1 node, 2 CPUs
185[ 0.213206] smpboot: Total of 2 processors activated (6602.02 BogoMIPS)
186[ 0.214039] devtmpfs: initialized
187[ 0.224021] RTC time: 8:38:40, date: 03/24/14
188[ 0.224135] NET: Registered protocol family 16
189[ 0.224386] cpuidle: using governor ladder
190[ 0.224390] cpuidle: using governor menu
191[ 0.224565] ACPI: bus type PCI registered
192[ 0.224570] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
193[ 0.224690] PCI: Using configuration type 1 for base access
194[ 0.224693] PCI: Using configuration type 1 for extended access
195[ 0.226036] bio: create slab <bio-0> at 0
196[ 0.226328] ACPI: Added _OSI(Module Device)
197[ 0.226332] ACPI: Added _OSI(Processor Device)
198[ 0.226336] ACPI: Added _OSI(3.0 _SCP Extensions)
199[ 0.226339] ACPI: Added _OSI(Processor Aggregator Device)
200[ 0.228622] ACPI: Executed 2 blocks of module-level executable AML code
201[ 0.232280] ACPI: Interpreter enabled
202[ 0.232301] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
203[ 0.232328] ACPI: (supports S0 S1 S3 S4 S5)
204[ 0.232331] ACPI: Using IOAPIC for interrupt routing
205[ 0.232364] HEST: Table parsing has been initialized.
206[ 0.232371] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
207[ 0.232523] ACPI: No dock devices found.
208[ 0.247783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
209[ 0.247799] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
210[ 0.247938] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
211[ 0.248441] PCI host bridge to bus 0000:00
212[ 0.248448] pci_bus 0000:00: root bus resource [bus 00-ff]
213[ 0.248453] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
214[ 0.248457] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
215[ 0.248462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
216[ 0.248466] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
217[ 0.248481] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
218[ 0.248660] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
219[ 0.248677] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
220[ 0.248687] pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff]
221[ 0.248698] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
222[ 0.248760] pci 0000:00:01.0: supports D1 D2
223[ 0.248846] pci 0000:00:01.0: System wakeup disabled by ACPI
224[ 0.248937] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400
225[ 0.249017] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
226[ 0.249108] pci 0000:00:06.0: System wakeup disabled by ACPI
227[ 0.249214] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
228[ 0.249241] pci 0000:00:11.0: reg 0x10: [io 0x3410-0x3417]
229[ 0.249256] pci 0000:00:11.0: reg 0x14: [io 0x3420-0x3423]
230[ 0.249270] pci 0000:00:11.0: reg 0x18: [io 0x3418-0x341f]
231[ 0.249284] pci 0000:00:11.0: reg 0x1c: [io 0x3424-0x3427]
232[ 0.249298] pci 0000:00:11.0: reg 0x20: [io 0x3400-0x340f]
233[ 0.249313] pci 0000:00:11.0: reg 0x24: [mem 0xf0248000-0xf02483ff]
234[ 0.249519] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
235[ 0.249539] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff]
236[ 0.249707] pci 0000:00:12.0: System wakeup disabled by ACPI
237[ 0.249779] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
238[ 0.249807] pci 0000:00:12.2: reg 0x10: [mem 0xf0248400-0xf02484ff]
239[ 0.249917] pci 0000:00:12.2: supports D1 D2
240[ 0.249921] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
241[ 0.250008] pci 0000:00:12.2: System wakeup disabled by ACPI
242[ 0.250096] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
243[ 0.250115] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff]
244[ 0.250267] pci 0000:00:13.0: System wakeup disabled by ACPI
245[ 0.250368] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
246[ 0.250396] pci 0000:00:13.2: reg 0x10: [mem 0xf0248500-0xf02485ff]
247[ 0.250505] pci 0000:00:13.2: supports D1 D2
248[ 0.250509] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
249[ 0.250598] pci 0000:00:13.2: System wakeup disabled by ACPI
250[ 0.250667] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
251[ 0.250898] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
252[ 0.250928] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
253[ 0.251017] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
254[ 0.251171] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
255[ 0.251396] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
256[ 0.251521] pci 0000:00:14.4: System wakeup disabled by ACPI
257[ 0.251598] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
258[ 0.251618] pci 0000:00:14.5: reg 0x10: [mem 0xf0246000-0xf0246fff]
259[ 0.251778] pci 0000:00:14.5: System wakeup disabled by ACPI
260[ 0.251865] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
261[ 0.251971] pci 0000:00:15.0: supports D1 D2
262[ 0.252064] pci 0000:00:15.0: System wakeup disabled by ACPI
263[ 0.252154] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
264[ 0.252174] pci 0000:00:16.0: reg 0x10: [mem 0xf0247000-0xf0247fff]
265[ 0.252326] pci 0000:00:16.0: System wakeup disabled by ACPI
266[ 0.252416] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
267[ 0.252443] pci 0000:00:16.2: reg 0x10: [mem 0xf0248600-0xf02486ff]
268[ 0.252553] pci 0000:00:16.2: supports D1 D2
269[ 0.252556] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
270[ 0.252644] pci 0000:00:16.2: System wakeup disabled by ACPI
271[ 0.252715] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
272[ 0.252869] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
273[ 0.253028] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
274[ 0.253178] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
275[ 0.253341] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
276[ 0.253485] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
277[ 0.253632] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
278[ 0.253782] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
279[ 0.254051] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
280[ 0.254071] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
281[ 0.254103] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
282[ 0.254123] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
283[ 0.254204] pci 0000:01:00.0: supports D1 D2
284[ 0.254208] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
285[ 0.279796] pci 0000:00:06.0: PCI bridge to [bus 01]
286[ 0.279821] pci 0000:00:06.0: bridge window [io 0x1000-0x1fff]
287[ 0.279841] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
288[ 0.280015] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
289[ 0.280030] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
290[ 0.280035] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
291[ 0.280039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
292[ 0.280043] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
293[ 0.280176] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
294[ 0.280205] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
295[ 0.280246] pci 0000:03:00.0: reg 0x18: [mem 0xf0104000-0xf0104fff 64bit pref]
296[ 0.280272] pci 0000:03:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
297[ 0.280382] pci 0000:03:00.0: supports D1 D2
298[ 0.280387] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
299[ 0.286487] pci 0000:00:15.0: PCI bridge to [bus 03]
300[ 0.286514] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
301[ 0.286533] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
302[ 0.287067] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
303[ 0.287174] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
304[ 0.287273] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
305[ 0.287370] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
306[ 0.287467] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
307[ 0.287563] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
308[ 0.287655] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
309[ 0.287751] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
310[ 0.288061] ACPI: Enabled 6 GPEs in block 00 to 1F
311[ 0.288075] ACPI: \_SB_.PCI0: notify handler is installed
312[ 0.288126] Found 1 acpi root devices
313[ 0.288511] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
314[ 0.288529] vgaarb: loaded
315[ 0.288532] vgaarb: bridge control possible 0000:00:01.0
316[ 0.288633] PCI: Using ACPI for IRQ routing
317[ 0.288640] PCI: pci_cache_line_size set to 64 bytes
318[ 0.288779] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
319[ 0.288784] e820: reserve RAM buffer [mem 0xc7fcd000-0xc7ffffff]
320[ 0.288787] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
321[ 0.288977] NetLabel: Initializing
322[ 0.288980] NetLabel: domain hash size = 128
323[ 0.288983] NetLabel: protocols = UNLABELED CIPSOv4
324[ 0.289013] NetLabel: unlabeled traffic allowed by default
325[ 0.289063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
326[ 0.289071] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
327[ 0.291180] Switched to clocksource hpet
328[ 0.301770] pnp: PnP ACPI init
329[ 0.301810] ACPI: bus type PNP registered
330[ 0.302168] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
331[ 0.302228] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
332[ 0.302252] pnp 00:02: [dma 4]
333[ 0.302290] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
334[ 0.302349] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
335[ 0.302420] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
336[ 0.302498] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
337[ 0.302781] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
338[ 0.302850] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
339[ 0.302855] pnp: PnP ACPI: found 8 devices
340[ 0.302857] ACPI: bus type PNP unregistered
341[ 0.313828] pci 0000:00:06.0: PCI bridge to [bus 01]
342[ 0.313840] pci 0000:00:06.0: bridge window [io 0x1000-0x1fff]
343[ 0.313850] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
344[ 0.313859] pci 0000:00:14.4: PCI bridge to [bus 02]
345[ 0.313877] pci 0000:00:15.0: PCI bridge to [bus 03]
346[ 0.313883] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
347[ 0.313893] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
348[ 0.313905] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
349[ 0.313909] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
350[ 0.313913] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
351[ 0.313917] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
352[ 0.313921] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
353[ 0.313925] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
354[ 0.313930] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
355[ 0.313934] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
356[ 0.313938] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
357[ 0.313941] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
358[ 0.313945] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
359[ 0.313949] pci_bus 0000:03: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
360[ 0.314016] NET: Registered protocol family 2
361[ 0.314364] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
362[ 0.314875] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
363[ 0.315478] TCP: Hash tables configured (established 65536 bind 65536)
364[ 0.315587] TCP: reno registered
365[ 0.315618] UDP hash table entries: 4096 (order: 5, 131072 bytes)
366[ 0.315738] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
367[ 0.315986] NET: Registered protocol family 1
368[ 0.316025] pci 0000:00:01.0: Boot video device
369[ 0.318871] PCI: CLS 64 bytes, default 64
370[ 0.318990] Unpacking initramfs...
371[ 4.495710] Freeing initrd memory: 19396K (ffff88007ed0f000 - ffff880080000000)
372[ 4.495725] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
373[ 4.495730] software IO TLB [mem 0xc3fcd000-0xc7fcd000] (64MB) mapped at [ffff8800c3fcd000-ffff8800c7fccfff]
374[ 4.496058] LVT offset 0 assigned for vector 0x400
375[ 4.496139] perf: AMD IBS detected (0x000000ff)
376[ 4.496194] Scanning for low memory corruption every 60 seconds
377[ 4.496965] audit: initializing netlink socket (disabled)
378[ 4.496993] type=2000 audit(1395650323.379:1): initialized
379[ 4.519272] HugeTLB registered 2 MB page size, pre-allocated 0 pages
380[ 4.522399] zbud: loaded
381[ 4.522925] VFS: Disk quotas dquot_6.5.2
382[ 4.523018] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
383[ 4.523542] msgmni has been set to 11154
384[ 4.523699] Key type big_key registered
385[ 4.524302] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
386[ 4.524385] io scheduler noop registered
387[ 4.524388] io scheduler deadline registered
388[ 4.524447] io scheduler cfq registered (default)
389[ 4.524564] pcieport 0000:00:06.0: device [1022:1514] has invalid IRQ; check vendor BIOS
390[ 4.524869] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
391[ 4.525161] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
392[ 4.525304] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
393[ 4.525309] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
394[ 4.525316] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
395[ 4.525365] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
396[ 4.525369] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
397[ 4.525376] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
398[ 4.525404] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
399[ 4.525436] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
400[ 4.525604] GHES: Failed to enable APEI firmware first mode.
401[ 4.525793] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
402[ 4.546632] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
403[ 4.547707] Linux agpgart interface v0.103
404[ 4.547851] rtc_cmos 00:00: RTC can wake from S4
405[ 4.548123] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
406[ 4.548166] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
407[ 4.548390] drop_monitor: Initializing network drop monitor service
408[ 4.548485] TCP: cubic registered
409[ 4.548674] NET: Registered protocol family 10
410[ 4.548980] NET: Registered protocol family 17
411[ 4.549000] Key type dns_resolver registered
412[ 4.549560] registered taskstats version 1
413[ 4.550686] Magic number: 6:213:625
414[ 4.550829] rtc_cmos 00:00: setting system clock to 2014-03-24 08:38:44 UTC (1395650324)
415[ 4.550875] PM: Hibernation image not present or could not be loaded.
416[ 4.553291] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
417[ 4.553300] Write protecting the kernel read-only data: 8192k
418[ 4.558442] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
419[ 4.560734] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
420[ 4.583480] systemd-udevd[46]: starting version 208
421[ 4.621466] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
422[ 4.621479] ACPI: Power Button [PWRB]
423[ 4.621578] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
424[ 4.621584] ACPI: Power Button [PWRF]
425[ 4.623657] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
426[ 4.625143] serio: i8042 KBD port at 0x60,0x64 irq 1
427[ 4.625596] serio: i8042 AUX port at 0x60,0x64 irq 12
428[ 4.638919] ACPI: bus type USB registered
429[ 4.638981] usbcore: registered new interface driver usbfs
430[ 4.639003] usbcore: registered new interface driver hub
431[ 4.640365] usbcore: registered new device driver usb
432[ 4.641277] SCSI subsystem initialized
433[ 4.643505] [drm] Initialized drm 1.1.0 20060810
434[ 4.645960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
435[ 4.646341] ehci-pci: EHCI PCI platform driver
436[ 4.646676] QUIRK: Enable AMD PLL fix
437[ 4.646720] ehci-pci 0000:00:12.2: EHCI Host Controller
438[ 4.646735] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
439[ 4.646748] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
440[ 4.646765] ehci-pci 0000:00:12.2: debug port 1
441[ 4.646842] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0248400
442[ 4.653492] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
443[ 4.653818] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
444[ 4.653993] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
445[ 4.654570] hub 1-0:1.0: USB hub found
446[ 4.654589] hub 1-0:1.0: 5 ports detected
447[ 4.654665] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000de2000, 00:30:18:a4:38:37, XID 0c200000 IRQ 42
448[ 4.654673] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
449[ 4.654959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
450[ 4.655172] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
451[ 4.655331] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
452[ 4.655514] ohci-pci: OHCI PCI platform driver
453[ 4.655871] r8169 0000:03:00.0 eth1: RTL8168e/8111e at 0xffffc900010ac000, 00:30:18:a4:38:38, XID 0c200000 IRQ 43
454[ 4.655878] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
455[ 4.656052] ehci-pci 0000:00:13.2: EHCI Host Controller
456[ 4.656069] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
457[ 4.656080] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
458[ 4.656097] ehci-pci 0000:00:13.2: debug port 1
459[ 4.656156] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0248500
460[ 4.664127] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
461[ 4.664639] hub 2-0:1.0: USB hub found
462[ 4.664664] hub 2-0:1.0: 5 ports detected
463[ 4.665292] ehci-pci 0000:00:16.2: EHCI Host Controller
464[ 4.665306] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
465[ 4.665316] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
466[ 4.665333] ehci-pci 0000:00:16.2: debug port 1
467[ 4.665392] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0248600
468[ 4.667514] libata version 3.00 loaded.
469[ 4.674062] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
470[ 4.674408] hub 3-0:1.0: USB hub found
471[ 4.674427] hub 3-0:1.0: 4 ports detected
472[ 4.674660] [drm] radeon kernel modesetting enabled.
473[ 4.675072] ohci-pci 0000:00:12.0: OHCI PCI host controller
474[ 4.675089] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
475[ 4.675150] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000
476[ 4.732106] hub 4-0:1.0: USB hub found
477[ 4.732132] hub 4-0:1.0: 5 ports detected
478[ 4.732851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
479[ 4.733229] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1002:0x9806).
480[ 4.733274] [drm] register mmio base: 0xF0200000
481[ 4.733277] [drm] register mmio size: 262144
482[ 4.733359] ATOM BIOS: AMD
483[ 4.733429] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
484[ 4.733434] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
485[ 4.733438] [drm] Detected VRAM RAM=384M, BAR=256M
486[ 4.733441] [drm] RAM width 32bits DDR
487[ 4.733546] [TTM] Zone kernel: Available graphics memory: 2856652 kiB
488[ 4.733549] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
489[ 4.733552] [TTM] Initializing pool allocator
490[ 4.733560] [TTM] Initializing DMA pool allocator
491[ 4.733601] [drm] radeon: 384M of VRAM memory ready
492[ 4.733605] [drm] radeon: 1024M of GTT memory ready.
493[ 4.734196] [drm] GART: num cpu pages 262144, num gpu pages 262144
494[ 4.747274] [drm] Loading PALM Microcode
495[ 4.750472] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
496[ 4.750730] radeon 0000:00:01.0: WB enabled
497[ 4.750738] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88007f574c00
498[ 4.750743] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88007f574c0c
499[ 4.751506] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900014b2118
500[ 4.751511] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
501[ 4.751513] [drm] Driver supports precise vblank timestamp query.
502[ 4.751552] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
503[ 4.751584] radeon 0000:00:01.0: radeon: using MSI.
504[ 4.751625] [drm] radeon: irq initialized.
505[ 4.768981] [drm] ring test on 0 succeeded in 1 usecs
506[ 4.769048] [drm] ring test on 3 succeeded in 1 usecs
507[ 4.825190] [drm] ring test on 5 succeeded in 1 usecs
508[ 4.845225] [drm] UVD initialized successfully.
509[ 4.846011] [drm] Enabling audio 0 support
510[ 4.846065] [drm] ib test on ring 0 succeeded in 0 usecs
511[ 4.846104] [drm] ib test on ring 3 succeeded in 0 usecs
512[ 4.866944] [drm] ib test on ring 5 succeeded
513[ 4.887801] [drm] Radeon Display Connectors
514[ 4.887805] [drm] Connector 0:
515[ 4.887808] [drm] DP-1
516[ 4.887811] [drm] HPD2
517[ 4.887815] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
518[ 4.887817] [drm] Encoders:
519[ 4.887819] [drm] DFP1: INTERNAL_UNIPHY
520[ 4.887822] [drm] Connector 1:
521[ 4.887824] [drm] VGA-1
522[ 4.887828] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
523[ 4.887830] [drm] Encoders:
524[ 4.887832] [drm] CRT1: INTERNAL_KLDSCP_DAC1
525[ 4.887882] [drm] Internal thermal controller without fan control
526[ 4.887945] [drm] Found smc ucode version: 0x00010601
527[ 4.888128] [drm] radeon: dpm initialized
528[ 4.932827] [drm] fb mappable at 0xE0477000
529[ 4.932835] [drm] vram apper at 0xE0000000
530[ 4.932838] [drm] size 8294400
531[ 4.932840] [drm] fb depth is 24
532[ 4.932843] [drm] pitch is 7680
533[ 4.933222] fbcon: radeondrmfb (fb0) is primary device
534[ 4.970963] usb 2-1: new high-speed USB device number 2 using ehci-pci
535[ 4.977311] Console: switching to colour frame buffer device 240x67
536[ 4.989723] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
537[ 4.989728] radeon 0000:00:01.0: registered panic notifier
538[ 4.989760] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
539[ 4.989808] ahci 0000:00:11.0: version 3.0
540[ 4.990216] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
541[ 4.990223] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
542[ 4.994754] scsi0 : ahci
543[ 4.995170] scsi1 : ahci
544[ 4.995363] scsi2 : ahci
545[ 4.995891] scsi3 : ahci
546[ 4.996069] scsi4 : ahci
547[ 4.996831] scsi5 : ahci
548[ 4.996929] ata1: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248100 irq 19
549[ 4.996936] ata2: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248180 irq 19
550[ 4.996940] ata3: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248200 irq 19
551[ 4.996946] ata4: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248280 irq 19
552[ 4.996950] ata5: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248300 irq 19
553[ 4.996955] ata6: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248380 irq 19
554[ 4.997325] ohci-pci 0000:00:13.0: OHCI PCI host controller
555[ 4.997340] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
556[ 4.997378] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000
557[ 5.052385] hub 5-0:1.0: USB hub found
558[ 5.052413] hub 5-0:1.0: 5 ports detected
559[ 5.052960] ohci-pci 0000:00:14.5: OHCI PCI host controller
560[ 5.052977] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
561[ 5.053011] ohci-pci 0000:00:14.5: irq 18, io mem 0xf0246000
562[ 5.099709] usb-storage 2-1:1.0: USB Mass Storage device detected
563[ 5.100331] scsi6 : usb-storage 2-1:1.0
564[ 5.100511] usbcore: registered new interface driver usb-storage
565[ 5.108917] hub 6-0:1.0: USB hub found
566[ 5.108944] hub 6-0:1.0: 2 ports detected
567[ 5.109430] ohci-pci 0000:00:16.0: OHCI PCI host controller
568[ 5.109443] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
569[ 5.109479] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0247000
570[ 5.165794] hub 7-0:1.0: USB hub found
571[ 5.165822] hub 7-0:1.0: 4 ports detected
572[ 5.318036] ata3: SATA link down (SStatus 0 SControl 300)
573[ 5.318160] ata5: SATA link down (SStatus 0 SControl 300)
574[ 5.318293] ata6: SATA link down (SStatus 0 SControl 300)
575[ 5.318427] ata4: SATA link down (SStatus 0 SControl 300)
576[ 5.318559] ata2: SATA link down (SStatus 0 SControl 300)
577[ 5.484806] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
578[ 5.491298] ata1.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
579[ 5.491309] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
580[ 5.497529] ata1.00: configured for UDMA/133
581[ 5.497923] tsc: Refined TSC clocksource calibration: 1649.999 MHz
582[ 5.497944] scsi 0:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5
583[ 5.505206] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
584[ 5.505216] sd 0:0:0:0: [sda] 4096-byte physical blocks
585[ 5.505333] sd 0:0:0:0: [sda] Write Protect is off
586[ 5.505339] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
587[ 5.505390] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
588[ 5.563886] sda: sda1 sda2 sda3 sda4 sda5
589[ 5.565227] sd 0:0:0:0: [sda] Attached SCSI disk
590[ 6.103842] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Switch 1.26 PQ: 0 ANSI: 6
591[ 6.106815] sd 6:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
592[ 6.108909] sd 6:0:0:0: [sdb] Write Protect is off
593[ 6.108929] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
594[ 6.110310] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
595[ 6.116571] sdb: sdb1 sdb2
596[ 6.122122] sd 6:0:0:0: [sdb] Attached SCSI disk
597[ 6.401086] ISO 9660 Extensions: RRIP_1991A
598[ 6.422938] loop: module loaded
599[ 6.486926] squashfs: version 4.0 (2009/01/31) Phillip Lougher
600[ 6.499022] Switched to clocksource tsc
601[ 6.514984] device-mapper: uevent: version 1.0.3
602[ 6.516092] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
603[ 6.516939] random: dmsetup urandom read with 81 bits of entropy available
604[ 6.525379] bio: create slab <bio-1> at 1
605[ 6.557959] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
606[ 7.221398] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
607[ 7.232885] systemd[1]: Set hostname to <archiso>.
608[ 7.375100] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
609[ 7.375261] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
610[ 7.375295] systemd[1]: Starting Remote File Systems.
611[ 7.375535] systemd[1]: Reached target Remote File Systems.
612[ 7.375558] systemd[1]: Starting Root Slice.
613[ 7.376059] systemd[1]: Created slice Root Slice.
614[ 7.376083] systemd[1]: Starting User and Session Slice.
615[ 7.376391] systemd[1]: Created slice User and Session Slice.
616[ 7.376416] systemd[1]: Starting System Slice.
617[ 7.376655] systemd[1]: Created slice System Slice.
618[ 7.376677] systemd[1]: Starting system-getty.slice.
619[ 7.376953] systemd[1]: Created slice system-getty.slice.
620[ 7.376975] systemd[1]: Starting Slices.
621[ 7.377103] systemd[1]: Reached target Slices.
622[ 7.377125] systemd[1]: Starting Delayed Shutdown Socket.
623[ 7.377335] systemd[1]: Listening on Delayed Shutdown Socket.
624[ 7.377356] systemd[1]: Starting Device-mapper event daemon FIFOs.
625[ 7.377545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
626[ 7.377568] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
627[ 7.377744] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
628[ 7.377823] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
629[ 7.378232] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
630[ 7.378267] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
631[ 7.378351] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
632[ 7.378371] systemd[1]: Starting Paths.
633[ 7.378504] systemd[1]: Reached target Paths.
634[ 7.378526] systemd[1]: Starting LVM2 metadata daemon socket.
635[ 7.378721] systemd[1]: Listening on LVM2 metadata daemon socket.
636[ 7.378753] systemd[1]: Starting udev Kernel Socket.
637[ 7.378948] systemd[1]: Listening on udev Kernel Socket.
638[ 7.378975] systemd[1]: Starting udev Control Socket.
639[ 7.379224] systemd[1]: Listening on udev Control Socket.
640[ 7.379248] systemd[1]: Starting Encrypted Volumes.
641[ 7.379399] systemd[1]: Reached target Encrypted Volumes.
642[ 7.379428] systemd[1]: Starting Journal Socket.
643[ 7.379646] systemd[1]: Listening on Journal Socket.
644[ 7.379693] systemd[1]: Mounting POSIX Message Queue File System...
645[ 7.389725] systemd[1]: Starting Create list of required static device nodes for the current kernel...
646[ 7.403848] systemd[1]: Starting Apply Kernel Variables...
647[ 7.405225] systemd[1]: Starting udev Coldplug all Devices...
648[ 7.453261] systemd[1]: Starting Load Kernel Modules...
649[ 7.462070] random: nonblocking pool is initialized
650[ 7.523154] systemd[1]: Started Set Up Additional Binary Formats.
651[ 7.523211] systemd[1]: Starting Setup Virtual Console...
652[ 7.524448] systemd[1]: Mounting Huge Pages File System...
653[ 7.527729] systemd[1]: Starting Journal Service...
654[ 7.533283] systemd[1]: Started Journal Service.
655[ 7.772585] systemd-journald[153]: Vacuuming done, freed 0 bytes
656[ 7.816426] FS-Cache: Loaded
657[ 7.896454] RPC: Registered named UNIX socket transport module.
658[ 7.896464] RPC: Registered udp transport module.
659[ 7.896467] RPC: Registered tcp transport module.
660[ 7.896469] RPC: Registered tcp NFSv4.1 backchannel transport module.
661[ 7.983691] systemd-udevd[175]: starting version 208
662[ 7.986423] FS-Cache: Netfs 'nfs' registered for caching
663[ 8.060945] systemd-journald[153]: Received request to flush runtime journal from PID 1
664[ 8.644982] ACPI: acpi_idle registered with cpuidle
665[ 8.710602] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
666[ 8.741922] acpi-cpufreq: overriding BIOS provided _PSD data
667[ 8.793715] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMB0 1 (20131115/utaddress-251)
668[ 8.793733] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
669[ 8.973807] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
670[ 8.973912] sp5100_tco: PCI Revision ID: 0x42
671[ 8.974019] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
672[ 8.974034] sp5100_tco: Last reboot was not triggered by watchdog.
673[ 8.974829] sp5100_tco: initialized (0xffffc90002dd0b00). heartbeat=60 sec (nowayout=0)
674[ 9.058053] systemd-udevd[188]: renamed network interface eth0 to enp1s0
675[ 9.073718] systemd-udevd[190]: renamed network interface eth1 to enp3s0
676[ 9.140850] input: PC Speaker as /devices/platform/pcspkr/input/input4
677[ 9.262082] microcode: CPU0: patch_level=0x05000101
678[ 9.541492] microcode: CPU0: new patch_level=0x05000119
679[ 9.553751] microcode: CPU1: patch_level=0x05000101
680[ 9.559864] microcode: CPU1: new patch_level=0x05000119
681[ 9.575155] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
682[ 9.617654] r8169 0000:03:00.0 enp3s0: link down
683[ 9.617692] r8169 0000:03:00.0 enp3s0: link down
684[ 9.617761] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
685[ 9.654954] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
686[ 9.655781] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
687[ 9.656508] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
688[ 9.657655] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
689[ 9.658674] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
690[ 9.659408] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
691[ 9.660522] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
692[ 9.661297] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
693[ 9.718847] kvm: Nested Virtualization enabled
694[ 9.718859] kvm: Nested Paging enabled
695[ 9.807801] r8169 0000:01:00.0 enp1s0: link down
696[ 9.807893] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
697[ 12.371003] r8169 0000:03:00.0 enp3s0: link up
698[ 12.371026] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
699[ 13.454772] type=1006 audit(1395650333.393:2): pid=205 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
700[ 13.487051] type=1006 audit(1395650333.426:3): pid=443 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
701[ 9509.340081] type=1006 audit(1395659823.263:4): pid=1130 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=3 res=1
702[11666.079341] type=1006 audit(1395661978.636:5): pid=1406 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=4 res=1