Gitiles
Code Review Sign In
review.coreboot.org / board-status / 7f6db60d40cdb040f38f3ffb3de6c37f6a6b1db9 / . / asus / kfsn4-dre / 4.5-928-g092db95 / 2017-02-02T06_06_20Z / kernel_log.txt
blob: 5144d7b683e877cf3999f77e046d1daea873289c [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand6a5283d2017-02-02 07:11:49 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 02/02/2017
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f0640-0x000f064f] mapped at [ffff8800000f0640]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F0810 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
63[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFAE900 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFAE940 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFAEA10 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFAEB60 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFAEB90 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFAEBD0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFAED20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048376
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour *CGA 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.666 MHz processor
182[ 0.000151] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.33 BogoMIPS (lpj=7638664)
183[ 0.010786] pid_max: default: 32768 minimum: 301
184[ 0.015432] ACPI: Core revision 20140424
185[ 0.021758] ACPI: All ACPI Tables successfully acquired
186[ 0.027118] Security Framework initialized
187[ 0.031245] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037089] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044795] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.057812] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067525] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074424] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082243] Initializing cgroup subsys memory
194[ 0.086622] Initializing cgroup subsys devices
195[ 0.091087] Initializing cgroup subsys freezer
196[ 0.095537] Initializing cgroup subsys net_cls
197[ 0.099996] Initializing cgroup subsys blkio
198[ 0.104282] Initializing cgroup subsys perf_event
199[ 0.108991] Initializing cgroup subsys net_prio
200[ 0.113578] tseg: 0000000000
201[ 0.113590] CPU: Physical Processor ID: 0
202[ 0.117620] CPU: Processor Core ID: 0
203[ 0.121299] mce: CPU supports 6 MCE banks
204[ 0.125336] LVT offset 0 assigned for vector 0xf9
205[ 0.130065] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145404] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
209[ 0.154405] ftrace: allocating 21614 entries in 85 pages
210[ 0.169655] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215170] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332517] Performance Events: AMD PMU driver.
213[ 0.337081] ... version: 0
214[ 0.341094] ... bit width: 48
215[ 0.345196] ... generic registers: 4
216[ 0.349211] ... value mask: 0000ffffffffffff
217[ 0.354521] ... max period: 00007fffffffffff
218[ 0.359842] ... fixed-purpose events: 0
219[ 0.363852] ... event mask: 000000000000000f
220[ 0.371703] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.379910] x86: Booting SMP configuration:
222[ 0.384101] .... node #0, CPUs: #1 #2 #3
223[ 0.428422] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581169] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585472] smpboot: Total of 8 processors activated (30556.57 BogoMIPS)
226[ 0.597961] devtmpfs: initialized
227[ 0.609287] pinctrl core: initialized pinctrl subsystem
228[ 0.614690] NET: Registered protocol family 16
229[ 0.619359] cpuidle: using governor ladder
230[ 0.623464] cpuidle: using governor menu
231[ 0.627401] node 0 link 1: io port [1000, 3fff]
232[ 0.627404] TOM: 00000000c0000000 aka 3072M
233[ 0.631598] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.631602] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.631605] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.631608] TOM2: 0000000180000000 aka 6144M
237[ 0.635884] bus: [bus 00-05] on node 0 link 1
238[ 0.635886] bus: 00 [io 0x0000-0xffff]
239[ 0.635888] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.635890] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.635991] ACPI: bus type PCI registered
242[ 0.640012] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.646622] PCI: Using configuration type 1 for base access
244[ 0.652198] PCI: Using configuration type 1 for extended access
245[ 0.669329] ACPI: Added _OSI(Module Device)
246[ 0.673523] ACPI: Added _OSI(Processor Device)
247[ 0.677975] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682686] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.689191] ACPI: Executed 1 blocks of module-level executable AML code
250[ 0.698352] ACPI: Interpreter enabled
251[ 0.702035] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
252[ 0.711300] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
253[ 0.720573] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
254[ 0.729847] ACPI: (supports S0 S1 S5)
255[ 0.733516] ACPI: Using IOAPIC for interrupt routing
256[ 0.738533] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
257[ 0.767042] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
258[ 0.773228] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
259[ 0.781440] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
260[ 0.821111] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
261[ 0.831113] PCI host bridge to bus 0000:00
262[ 0.835220] pci_bus 0000:00: root bus resource [bus 00-05]
263[ 0.840713] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
264[ 0.846897] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
265[ 0.853767] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
266[ 0.860638] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
267[ 0.867517] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
268[ 0.873715] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
269[ 0.873917] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
270[ 0.873925] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
271[ 0.874044] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
272[ 0.874051] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
273[ 0.874072] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
274[ 0.874077] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
275[ 0.874097] pci 0000:00:01.1: PME# supported from D3hot D3cold
276[ 0.874196] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
277[ 0.874209] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
278[ 0.874258] pci 0000:00:02.0: supports D1 D2
279[ 0.874268] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
280[ 0.874312] pci 0000:00:02.0: System wakeup disabled by ACPI
281[ 0.880038] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
282[ 0.880050] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
283[ 0.880100] pci 0000:00:02.1: supports D1 D2
284[ 0.880110] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
285[ 0.880152] pci 0000:00:02.1: System wakeup disabled by ACPI
286[ 0.885879] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
287[ 0.885909] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
288[ 0.885920] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
289[ 0.893058] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
290[ 0.899589] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
291[ 0.906719] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
292[ 0.913346] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
293[ 0.913357] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
294[ 0.913361] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
295[ 0.913366] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
296[ 0.913371] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
297[ 0.913375] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
298[ 0.913380] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
299[ 0.913538] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
300[ 0.913550] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
301[ 0.913554] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
302[ 0.913559] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
303[ 0.913563] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
304[ 0.913568] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
305[ 0.913573] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
306[ 0.913681] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
307[ 0.913748] pci 0000:00:09.0: System wakeup disabled by ACPI
308[ 0.919478] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
309[ 0.919518] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
310[ 0.919570] pci 0000:00:0b.0: System wakeup disabled by ACPI
311[ 0.925293] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
312[ 0.925364] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
313[ 0.925410] pci 0000:00:0c.0: System wakeup disabled by ACPI
314[ 0.931139] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
315[ 0.931189] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.931237] pci 0000:00:0d.0: System wakeup disabled by ACPI
317[ 0.936957] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
318[ 0.936996] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.937052] pci 0000:00:0e.0: System wakeup disabled by ACPI
320[ 0.942798] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
321[ 0.943019] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
322[ 0.943141] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
323[ 0.943289] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
324[ 0.943460] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
325[ 0.943582] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
326[ 0.943795] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
327[ 0.943911] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
328[ 0.944050] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
329[ 0.944201] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
330[ 0.944383] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
331[ 0.944408] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
332[ 0.944415] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
333[ 0.944427] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
334[ 0.944472] pci 0000:01:04.0: supports D1 D2
335[ 0.944578] pci 0000:00:09.0: PCI bridge to [bus 01]
336[ 0.949555] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
337[ 0.949559] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
338[ 0.949562] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
339[ 0.949668] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
340[ 0.949726] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
341[ 0.949752] pci 0000:02:00.0: reg 0x30: [mem 0x69c00000-0x69c0ffff pref]
342[ 0.949858] pci 0000:02:00.0: PME# supported from D3hot D3cold
343[ 0.949968] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
344[ 0.959965] pci 0000:00:0b.0: PCI bridge to [bus 02]
345[ 0.964933] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
346[ 0.965035] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
347[ 0.965069] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
348[ 0.965171] pci 0000:03:00.0: PME# supported from D3hot D3cold
349[ 0.965260] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.975256] pci 0000:00:0c.0: PCI bridge to [bus 03]
351[ 0.980225] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
352[ 0.980306] pci 0000:00:0d.0: PCI bridge to [bus 04]
353[ 0.985348] pci 0000:00:0e.0: PCI bridge to [bus 05]
354[ 0.990329] pci_bus 0000:00: on NUMA node 0
355[ 0.990438] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
356[ 0.996597] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
357[ 1.002734] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
358[ 1.010031] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
359[ 1.017323] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
360[ 1.024605] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
361[ 1.031897] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
362[ 1.038003] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
363[ 1.044136] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.051430] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
365[ 1.058746] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
366[ 1.066044] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
367[ 1.072162] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
368[ 1.078293] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
369[ 1.085589] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
370[ 1.092875] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
371[ 1.100166] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
372[ 1.108686] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
373[ 1.115143] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
374[ 1.121612] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
375[ 1.128072] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
376[ 1.134829] ACPI: Enabled 1 GPEs in block 00 to 1F
377[ 1.139952] vgaarb: setting as boot device: PCI:0000:01:04.0
378[ 1.145621] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
379[ 1.153717] vgaarb: loaded
380[ 1.156433] vgaarb: bridge control possible 0000:01:04.0
381[ 1.161917] PCI: Using ACPI for IRQ routing
382[ 1.166115] PCI: pci_cache_line_size set to 64 bytes
383[ 1.166171] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
384[ 1.166175] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
385[ 1.166482] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
386[ 1.173538] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
387[ 1.178601] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
388[ 1.187280] Switched to clocksource hpet
389[ 1.202733] pnp: PnP ACPI init
390[ 1.205837] ACPI: bus type PNP registered
391[ 1.210361] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
392[ 1.210445] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
393[ 1.210526] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.210621] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
395[ 1.210658] pnp 00:04: [dma 2]
396[ 1.210705] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
397[ 1.210736] pnp: PnP ACPI: found 5 devices
398[ 1.214838] ACPI: bus type PNP unregistered
399[ 1.226848] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69c00000-0x69c0ffff pref]: no compatible bridge window
400[ 1.236797] pci 0000:00:09.0: PCI bridge to [bus 01]
401[ 1.241774] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
402[ 1.247881] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
403[ 1.254675] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
404[ 1.261908] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
405[ 1.269133] pci 0000:00:0b.0: PCI bridge to [bus 02]
406[ 1.274107] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
407[ 1.280903] pci 0000:00:0c.0: PCI bridge to [bus 03]
408[ 1.285873] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
409[ 1.292666] pci 0000:00:0d.0: PCI bridge to [bus 04]
410[ 1.297639] pci 0000:00:0e.0: PCI bridge to [bus 05]
411[ 1.302615] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
412[ 1.302617] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
413[ 1.302620] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
414[ 1.302622] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
415[ 1.302625] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
416[ 1.302629] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
417[ 1.302631] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
418[ 1.302634] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
419[ 1.302637] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
420[ 1.302639] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
421[ 1.302778] NET: Registered protocol family 2
422[ 1.307680] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
423[ 1.315374] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
424[ 1.322709] TCP: Hash tables configured (established 65536 bind 65536)
425[ 1.329315] TCP: reno registered
426[ 1.332569] UDP hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.338780] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
428[ 1.345569] NET: Registered protocol family 1
429[ 1.350309] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
430[ 1.356386] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
431[ 1.362302] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.367831] pci 0000:00:00.0: Found enabled HT MSI Mapping
433[ 1.373354] pci 0000:00:0b.0: Found disabled HT MSI Mapping
434[ 1.378944] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.384479] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.390002] pci 0000:00:0c.0: Found disabled HT MSI Mapping
437[ 1.395572] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.401124] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.406643] pci 0000:00:0d.0: Found disabled HT MSI Mapping
440[ 1.412226] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.417760] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.423282] pci 0000:00:0e.0: Found disabled HT MSI Mapping
443[ 1.428861] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.434380] pci 0000:01:04.0: Video device with shadowed ROM
445[ 1.434389] PCI: CLS 64 bytes, default 64
446[ 1.434500] Unpacking initramfs...
447[ 1.817669] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
448[ 1.825586] PCI-DMA: Disabling AGP.
449[ 1.829256] PCI-DMA: aperture base @ b4000000 size 65536 KB
450[ 1.834840] PCI-DMA: using GART IOMMU.
451[ 1.838601] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
452[ 1.850498] platform rtc_cmos: registered platform RTC device (no PNP device found)
453[ 1.858651] microcode: CPU0: patch_level=0x01000084
454[ 1.863543] microcode: CPU1: patch_level=0x01000084
455[ 1.868436] microcode: CPU2: patch_level=0x01000084
456[ 1.873338] microcode: CPU3: patch_level=0x01000084
457[ 1.878246] microcode: CPU4: patch_level=0x01000084
458[ 1.883144] microcode: CPU5: patch_level=0x01000084
459[ 1.888045] microcode: CPU6: patch_level=0x01000084
460[ 1.892942] microcode: CPU7: patch_level=0x01000084
461[ 1.897922] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
462[ 1.906729] LVT offset 1 assigned for vector 0x400
463[ 1.911537] IBS: LVT offset 1 assigned
464[ 1.915327] perf: AMD IBS detected (0x00000007)
465[ 1.920483] futex hash table entries: 2048 (order: 5, 131072 bytes)
466[ 1.926875] audit: initializing netlink subsys (disabled)
467[ 1.932300] audit: type=2000 audit(1486019370.664:1): initialized
468[ 1.939183] HugeTLB registered 2 MB page size, pre-allocated 0 pages
469[ 1.945587] zbud: loaded
470[ 1.948489] VFS: Disk quotas dquot_6.5.2
471[ 1.952452] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
472[ 1.959006] msgmni has been set to 9945
473[ 1.963385] alg: No test for stdrng (krng)
474[ 1.967543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
475[ 1.975068] io scheduler noop registered
476[ 1.979003] io scheduler deadline registered
477[ 1.983350] io scheduler cfq registered (default)
478[ 1.988273] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
479[ 1.988398] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
480[ 1.988509] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
481[ 1.988637] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
482[ 1.988788] aer 0000:00:0b.0:pcie02: service driver aer loaded
483[ 1.988815] aer 0000:00:0c.0:pcie02: service driver aer loaded
484[ 1.988839] aer 0000:00:0d.0:pcie02: service driver aer loaded
485[ 1.988864] aer 0000:00:0e.0:pcie02: service driver aer loaded
486[ 1.988886] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
487[ 1.995855] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
488[ 2.002383] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
489[ 2.002393] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
490[ 2.009355] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
491[ 2.015888] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
492[ 2.015898] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
493[ 2.022863] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
494[ 2.022874] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
495[ 2.029840] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
496[ 2.029870] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
497[ 2.035480] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
498[ 2.042191] GHES: HEST is not enabled!
499[ 2.046082] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
500[ 2.072682] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
501[ 2.100348] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
502[ 2.108266] Linux agpgart interface v0.103
503[ 2.112575] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
504[ 2.122929] serio: i8042 KBD port at 0x60,0x64 irq 1
505[ 2.127985] serio: i8042 AUX port at 0x60,0x64 irq 12
506[ 2.133253] mousedev: PS/2 mouse device common for all mice
507[ 2.138928] rtc_cmos rtc_cmos: RTC can wake from S4
508[ 2.144063] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
509[ 2.150456] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
510[ 2.158313] ledtrig-cpu: registered to indicate activity on CPUs
511[ 2.164503] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
512[ 2.170954] AMD IOMMUv2 functionality not available on this system
513[ 2.177278] TCP: cubic registered
514[ 2.180770] NET: Registered protocol family 10
515[ 2.185641] mip6: Mobile IPv6
516[ 2.187363] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
517[ 2.197225] NET: Registered protocol family 17
518[ 2.201678] mpls_gso: MPLS GSO support
519[ 2.206288] registered taskstats version 1
520[ 2.211168] rtc_cmos rtc_cmos: setting system clock to 2017-02-02 07:09:32 UTC (1486019372)
521[ 2.219588] PM: Hibernation image not present or could not be loaded.
522[ 2.221376] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
523[ 2.229229] Write protecting the kernel read-only data: 8192k
524[ 2.238422] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
525[ 2.247022] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
526[ 2.279799] systemd-udevd[98]: starting version 215
527[ 2.285512] random: systemd-udevd urandom read with 3 bits of entropy available
528[ 2.314511] SCSI subsystem initialized
529[ 2.319092] ACPI: bus type USB registered
530[ 2.323246] usbcore: registered new interface driver usbfs
531[ 2.328846] usbcore: registered new interface driver hub
532[ 2.330961] FDC 0 is a post-1991 82077
533[ 2.338172] pps_core: LinuxPPS API ver. 1 registered
534[ 2.338468] usbcore: registered new device driver usb
535[ 2.348281] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.357723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
537[ 2.364776] PTP clock support registered
538[ 2.364969] libata version 3.00 loaded.
539[ 2.369144] ehci-pci: EHCI PCI platform driver
540[ 2.373886] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
541[ 2.374114] ehci-pci 0000:00:02.1: EHCI Host Controller
542[ 2.374135] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
543[ 2.374156] ehci-pci 0000:00:02.1: debug port 1
544[ 2.374201] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
545[ 2.374235] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
546[ 2.382868] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
547[ 2.382956] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
548[ 2.382958] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
549[ 2.382959] usb usb1: Product: EHCI Host Controller
550[ 2.382961] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
551[ 2.382962] usb usb1: SerialNumber: 0000:00:02.1
552[ 2.383190] hub 1-0:1.0: USB hub found
553[ 2.383199] hub 1-0:1.0: 10 ports detected
554[ 2.447137] pata_amd 0000:00:06.0: version 0.4.1
555[ 2.447170] ohci-pci: OHCI PCI platform driver
556[ 2.447865] scsi0 : pata_amd
557[ 2.454870] tg3.c:v3.137 (May 11, 2014)
558[ 2.454893] scsi1 : pata_amd
559[ 2.454965] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
560[ 2.454967] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
561[ 2.455051] sata_nv 0000:00:07.0: version 3.5
562[ 2.455322] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
563[ 2.455944] scsi2 : sata_nv
564[ 2.456190] scsi3 : sata_nv
565[ 2.456263] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
566[ 2.456266] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
567[ 2.456543] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
568[ 2.457044] scsi4 : sata_nv
569[ 2.457205] scsi5 : sata_nv
570[ 2.457267] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
571[ 2.457269] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
572[ 2.457485] ohci-pci 0000:00:02.0: OHCI PCI host controller
573[ 2.457501] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
574[ 2.457555] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
575[ 2.512894] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
576[ 2.512896] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
577[ 2.512898] usb usb2: Product: OHCI PCI host controller
578[ 2.512899] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
579[ 2.512901] usb usb2: SerialNumber: 0000:00:02.0
580[ 2.513095] hub 2-0:1.0: USB hub found
581[ 2.513107] hub 2-0:1.0: 10 ports detected
582[ 2.583143] tg3 0000:02:00.0: enabling device (0004 -> 0006)
583[ 2.589067] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
584[ 2.661560] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
585[ 2.671818] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
586[ 2.681555] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
587[ 2.689386] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
588[ 2.696191] tg3 0000:03:00.0: enabling device (0004 -> 0006)
589[ 2.702006] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
590[ 2.755276] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
591[ 2.765544] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
592[ 2.766762] ata5: SATA link down (SStatus 0 SControl 300)
593[ 2.766770] ata3: SATA link down (SStatus 0 SControl 300)
594[ 2.786073] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
595[ 2.793905] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
596[ 2.846725] tsc: Refined TSC clocksource calibration: 1909.786 MHz
597[ 3.094657] ata4: SATA link down (SStatus 0 SControl 300)
598[ 3.410522] ata6: SATA link down (SStatus 0 SControl 300)
599[ 3.435987] FS-Cache: Loaded
600[ 3.444068] RPC: Registered named UNIX socket transport module.
601[ 3.451108] RPC: Registered udp transport module.
602[ 3.457196] RPC: Registered tcp transport module.
603[ 3.463287] RPC: Registered tcp NFSv4.1 backchannel transport module.
604[ 3.476669] FS-Cache: Netfs 'nfs' registered for caching
605[ 3.493288] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
606[ 3.538577] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
607[ 3.850476] Switched to clocksource tsc
608[ 6.708043] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
609[ 6.714660] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
610[ 6.721546] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
611[ 7.691218] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
612[ 7.705252] systemd[1]: Detected architecture 'x86-64'.
613[ 7.750212] systemd[1]: Inserted module 'autofs4'
614[ 7.756194] systemd[1]: Set hostname to <cb-test-tgt>.
615[ 7.916469] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
616[ 7.929194] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
617[ 7.944571] systemd[1]: Expecting device dev-ttyS0.device...
618[ 7.961103] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
619[ 7.968880] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
620[ 7.976479] systemd[1]: Starting Remote File Systems (Pre).
621[ 7.992972] systemd[1]: Reached target Remote File Systems (Pre).
622[ 7.999103] systemd[1]: Starting Encrypted Volumes.
623[ 8.012975] systemd[1]: Reached target Encrypted Volumes.
624[ 8.018435] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
625[ 8.040990] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
626[ 8.050428] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
627[ 8.058494] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
628[ 8.066425] systemd[1]: Starting Paths.
629[ 8.081041] systemd[1]: Reached target Paths.
630[ 8.085481] systemd[1]: Starting Swap.
631[ 8.096947] systemd[1]: Reached target Swap.
632[ 8.101246] systemd[1]: Starting Root Slice.
633[ 8.112945] systemd[1]: Created slice Root Slice.
634[ 8.117680] systemd[1]: Starting User and Session Slice.
635[ 8.132928] systemd[1]: Created slice User and Session Slice.
636[ 8.138697] systemd[1]: Starting Delayed Shutdown Socket.
637[ 8.152938] systemd[1]: Listening on Delayed Shutdown Socket.
638[ 8.158708] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
639[ 8.176929] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
640[ 8.183907] systemd[1]: Starting Journal Socket (/dev/log).
641[ 8.200909] systemd[1]: Listening on Journal Socket (/dev/log).
642[ 8.206861] systemd[1]: Starting udev Kernel Socket.
643[ 8.220915] systemd[1]: Listening on udev Kernel Socket.
644[ 8.226262] systemd[1]: Starting udev Control Socket.
645[ 8.240898] systemd[1]: Listening on udev Control Socket.
646[ 8.246331] systemd[1]: Starting Journal Socket.
647[ 8.260885] systemd[1]: Listening on Journal Socket.
648[ 8.265905] systemd[1]: Starting System Slice.
649[ 8.280876] systemd[1]: Created slice System Slice.
650[ 8.285782] systemd[1]: Starting system-getty.slice.
651[ 8.300874] systemd[1]: Created slice system-getty.slice.
652[ 8.306293] systemd[1]: Starting system-serial\x2dgetty.slice.
653[ 8.320867] systemd[1]: Created slice system-serial\x2dgetty.slice.
654[ 8.327177] systemd[1]: Starting Increase datagram queue length...
655[ 8.346301] systemd[1]: Starting udev Coldplug all Devices...
656[ 8.383095] systemd[1]: Starting Load Kernel Modules...
657[ 8.400723] systemd[1]: Started Set Up Additional Binary Formats.
658[ 8.407051] systemd[1]: Mounting Debug File System...
659[ 8.422572] systemd[1]: Starting Create list of required static device nodes for the current kernel...
660[ 8.446414] systemd[1]: Mounting POSIX Message Queue File System...
661[ 8.466051] systemd[1]: Mounting Huge Pages File System...
662[ 8.481966] systemd[1]: Starting Slices.
663[ 8.496892] systemd[1]: Reached target Slices.
664[ 8.501433] systemd[1]: Starting Remount Root and Kernel File Systems...
665[ 8.528870] systemd[1]: Mounted Huge Pages File System.
666[ 8.544867] systemd[1]: Mounted POSIX Message Queue File System.
667[ 8.560787] systemd[1]: Mounted Debug File System.
668[ 8.576849] systemd[1]: Started Increase datagram queue length.
669[ 8.592823] systemd[1]: Started Load Kernel Modules.
670[ 8.612810] systemd[1]: Started Create list of required static device nodes for the current kernel.
671[ 8.636810] systemd[1]: Started Remount Root and Kernel File Systems.
672[ 8.652851] systemd[1]: Started udev Coldplug all Devices.
673[ 8.698850] systemd[1]: Started Various fixups to make systemd work better on Debian.
674[ 8.706730] systemd[1]: Starting Load/Save Random Seed...
675[ 8.722430] systemd[1]: Starting Create Static Device Nodes in /dev...
676[ 8.746178] systemd[1]: Starting Apply Kernel Variables...
677[ 8.762347] systemd[1]: Mounted Configuration File System.
678[ 8.767901] systemd[1]: Mounted FUSE Control File System.
679[ 8.773321] systemd[1]: Starting Syslog Socket.
680[ 8.788794] systemd[1]: Listening on Syslog Socket.
681[ 8.793754] systemd[1]: Starting Sockets.
682[ 8.808756] systemd[1]: Reached target Sockets.
683[ 8.813361] systemd[1]: Starting Journal Service...
684[ 8.840776] systemd[1]: Started Journal Service.
685[ 8.917751] systemd-udevd[211]: starting version 215
686[ 9.028703] systemd-journald[210]: Received request to flush runtime journal from PID 1
687[ 9.066860] EDAC MC: Ver: 3.0.0
688[ 9.071664] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
689[ 9.079950] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
690[ 9.088257] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
691[ 9.097246] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
692[ 9.105937] ACPI: Power Button [PWRB]
693[ 9.106167] MCE: In-kernel MCE decoding enabled.
694[ 9.117669] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
695[ 9.126273] input: PC Speaker as /devices/platform/pcspkr/input/input4
696[ 9.126686] ACPI: Power Button [PWRF]
697[ 9.138610] acpi-cpufreq: overriding BIOS provided _PSD data
698[ 9.145036] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
699[ 9.150382] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
700[ 9.155909] AMD64 EDAC driver v3.4.0
701[ 9.160946] EDAC amd64: DRAM ECC enabled.
702[ 9.165037] EDAC amd64: F10h detected (node 0).
703[ 9.169645] EDAC MC: DCT0 chip selects:
704[ 9.169649] EDAC amd64: MC: 0: 0MB 1: 0MB
705[ 9.174399] EDAC amd64: MC: 2: 0MB 3: 0MB
706[ 9.174400] EDAC amd64: MC: 4: 0MB 5: 0MB
707[ 9.174402] EDAC amd64: MC: 6: 2048MB 7: 2048MB
708[ 9.174405] EDAC MC: DCT1 chip selects:
709[ 9.174406] EDAC amd64: MC: 0: 0MB 1: 0MB
710[ 9.174408] EDAC amd64: MC: 2: 0MB 3: 0MB
711[ 9.174409] EDAC amd64: MC: 4: 0MB 5: 0MB
712[ 9.174410] EDAC amd64: MC: 6: 1024MB 7: 1024MB
713[ 9.174411] EDAC amd64: using x4 syndromes.
714[ 9.174472] EDAC amd64: CS6: Registered DDR2 RAM
715[ 9.174473] EDAC amd64: CS7: Registered DDR2 RAM
716[ 9.174834] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
717[ 9.174947] EDAC amd64: DRAM ECC enabled.
718[ 9.174961] EDAC amd64: F10h detected (node 1).
719[ 9.174989] EDAC MC: DCT0 chip selects:
720[ 9.174991] EDAC amd64: MC: 0: 1024MB 1: 0MB
721[ 9.174992] EDAC amd64: MC: 2: 0MB 3: 0MB
722[ 9.174993] EDAC amd64: MC: 4: 0MB 5: 0MB
723[ 9.174994] EDAC amd64: MC: 6: 0MB 7: 0MB
724[ 9.174994] EDAC MC: DCT1 chip selects:
725[ 9.174995] EDAC amd64: MC: 0: 0MB 1: 0MB
726[ 9.174997] EDAC amd64: MC: 2: 0MB 3: 0MB
727[ 9.174998] EDAC amd64: MC: 4: 0MB 5: 0MB
728[ 9.174998] EDAC amd64: MC: 6: 0MB 7: 0MB
729[ 9.175001] EDAC amd64: using x4 syndromes.
730[ 9.175002] EDAC amd64: MCT channel count: 1
731[ 9.175043] EDAC amd64: CS0: Registered DDR2 RAM
732[ 9.175218] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
733[ 9.175275] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
734[ 9.239787] kvm: Nested Virtualization enabled
735[ 9.239791] kvm: Nested Paging enabled
736[ 9.403790] random: nonblocking pool is initialized
737[ 39.559540] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****