Gitiles
Code Review Sign In
review.coreboot.org / board-status / 7f6db60d40cdb040f38f3ffb3de6c37f6a6b1db9 / . / asus / kfsn4-dre / 4.2-400-g56c8ef9 / 2015-11-26T00:09:16Z / kernel_log.txt
blob: 8bbd95df6aa566b7e70b7759b550f618eed035da [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand38c94032015-11-26 01:09:09 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-400-g56c8ef9-dirty 11/26/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F4000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7B10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048377
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
163[ 0.000000] AGP: Node 1: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
164[ 0.000000] Memory: 5083036K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 159048K reserved)
165[ 0.000000] Hierarchical RCU implementation.
166[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
167[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
168[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
169[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
170[ 0.000000] spurious 8259A interrupt: IRQ7.
171[ 0.000000] Console: colour VGA+ 80x25
172[ 0.000000] console [ttyS0] enabled
173[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
174[ 0.000000] hpet clockevent registered
175[ 0.000000] tsc: Fast TSC calibration using PIT
176[ 0.000000] tsc: Detected 1909.859 MHz processor
177[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.71 BogoMIPS (lpj=7639436)
178[ 0.010794] pid_max: default: 32768 minimum: 301
179[ 0.015449] ACPI: Core revision 20140424
180[ 0.021836] ACPI: All ACPI Tables successfully acquired
181[ 0.027188] Security Framework initialized
182[ 0.031315] AppArmor: AppArmor disabled by boot time parameter
183[ 0.037150] Yama: disabled by default; enable with sysctl kernel.yama.*
184[ 0.044870] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
185[ 0.058100] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
186[ 0.067889] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
187[ 0.074790] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
188[ 0.082644] Initializing cgroup subsys memory
189[ 0.087020] Initializing cgroup subsys devices
190[ 0.091481] Initializing cgroup subsys freezer
191[ 0.095950] Initializing cgroup subsys net_cls
192[ 0.100412] Initializing cgroup subsys blkio
193[ 0.104706] Initializing cgroup subsys perf_event
194[ 0.109424] Initializing cgroup subsys net_prio
195[ 0.114003] tseg: 0000000000
196[ 0.114014] CPU: Physical Processor ID: 0
197[ 0.118043] CPU: Processor Core ID: 0
198[ 0.121716] mce: CPU supports 6 MCE banks
199[ 0.125743] LVT offset 0 assigned for vector 0xf9
200[ 0.130463] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
201Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
202tlb_flushall_shift: 6
203[ 0.145802] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
204[ 0.154809] ftrace: allocating 21601 entries in 85 pages
205[ 0.170182] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
206[ 0.215701] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
207[ 0.332512] Performance Events: AMD PMU driver.
208[ 0.337081] ... version: 0
209[ 0.341093] ... bit width: 48
210[ 0.345190] ... generic registers: 4
211[ 0.349202] ... value mask: 0000ffffffffffff
212[ 0.354512] ... max period: 00007fffffffffff
213[ 0.359823] ... fixed-purpose events: 0
214[ 0.363852] ... event mask: 000000000000000f
215[ 0.371774] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
216[ 0.379976] x86: Booting SMP configuration:
217[ 0.384165] .... node #0, CPUs: #1 #2 #3
218[ 0.428503] .... node #1, CPUs: #4 #5 #6 #7
219[ 0.581128] x86: Booted up 2 nodes, 8 CPUs
220[ 0.585429] smpboot: Total of 8 processors activated (30558.12 BogoMIPS)
221[ 0.597954] devtmpfs: initialized
222[ 0.609889] pinctrl core: initialized pinctrl subsystem
223[ 0.615283] NET: Registered protocol family 16
224[ 0.619950] cpuidle: using governor ladder
225[ 0.624053] cpuidle: using governor menu
226[ 0.627990] node 0 link 1: io port [1000, 3fff]
227[ 0.627994] TOM: 00000000c0000000 aka 3072M
228[ 0.632185] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
229[ 0.632189] node 0 link 1: mmio [fc000000, fc3fffff]
230[ 0.632192] node 0 link 1: mmio [f4000000, f7ffffff]
231[ 0.632195] TOM2: 0000000180000000 aka 6144M
232[ 0.636474] bus: [bus 00-05] on node 0 link 1
233[ 0.636476] bus: 00 [io 0x0000-0xffff]
234[ 0.636478] bus: 00 [mem 0xf8000000-0xffffffff]
235[ 0.636480] bus: 00 [mem 0xd0000000-0xf7ffffff]
236[ 0.636481] bus: 00 [mem 0x180000000-0xfcffffffff]
237[ 0.636588] ACPI: bus type PCI registered
238[ 0.640608] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
239[ 0.647227] PCI: Using configuration type 1 for base access
240[ 0.652805] PCI: Using configuration type 1 for extended access
241[ 0.669343] ACPI: Added _OSI(Module Device)
242[ 0.673540] ACPI: Added _OSI(Processor Device)
243[ 0.677991] ACPI: Added _OSI(3.0 _SCP Extensions)
244[ 0.682704] ACPI: Added _OSI(Processor Aggregator Device)
245[ 0.691746] ACPI: Interpreter enabled
246[ 0.695426] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
247[ 0.704690] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
248[ 0.713954] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
249[ 0.723235] ACPI: (supports S0 S1 S5)
250[ 0.726905] ACPI: Using IOAPIC for interrupt routing
251[ 0.731924] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
252[ 0.761320] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
253[ 0.767510] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
254[ 0.775720] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
255[ 0.815811] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
256[ 0.825849] PCI host bridge to bus 0000:00
257[ 0.829952] pci_bus 0000:00: root bus resource [bus 00-05]
258[ 0.835443] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
259[ 0.841622] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
260[ 0.848499] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xf7ffffff]
261[ 0.855369] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
262[ 0.862241] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
263[ 0.868437] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
264[ 0.868624] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
265[ 0.868632] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
266[ 0.868756] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
267[ 0.868766] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
268[ 0.868790] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
269[ 0.868809] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
270[ 0.868835] pci 0000:00:01.1: PME# supported from D3hot D3cold
271[ 0.868956] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
272[ 0.868967] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
273[ 0.869003] pci 0000:00:02.0: supports D1 D2
274[ 0.869014] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
275[ 0.869090] pci 0000:00:02.0: System wakeup disabled by ACPI
276[ 0.874810] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
277[ 0.874821] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
278[ 0.874871] pci 0000:00:02.1: supports D1 D2
279[ 0.874878] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
280[ 0.874927] pci 0000:00:02.1: System wakeup disabled by ACPI
281[ 0.880653] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
282[ 0.880680] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
283[ 0.880723] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
284[ 0.887859] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
285[ 0.894392] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
286[ 0.901530] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
287[ 0.908164] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
288[ 0.908175] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
289[ 0.908180] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
290[ 0.908185] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
291[ 0.908189] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
292[ 0.908194] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
293[ 0.908199] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
294[ 0.908353] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
295[ 0.908363] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
296[ 0.908368] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
297[ 0.908372] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
298[ 0.908377] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
299[ 0.908381] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
300[ 0.908386] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
301[ 0.908520] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
302[ 0.908603] pci 0000:00:09.0: System wakeup disabled by ACPI
303[ 0.914326] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
304[ 0.914375] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
305[ 0.914428] pci 0000:00:0b.0: System wakeup disabled by ACPI
306[ 0.920145] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
307[ 0.920201] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
308[ 0.920251] pci 0000:00:0c.0: System wakeup disabled by ACPI
309[ 0.925974] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
310[ 0.926024] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
311[ 0.926082] pci 0000:00:0d.0: System wakeup disabled by ACPI
312[ 0.931801] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
313[ 0.931859] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
314[ 0.931946] pci 0000:00:0e.0: System wakeup disabled by ACPI
315[ 0.937674] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
316[ 0.937841] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
317[ 0.937995] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
318[ 0.938163] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
319[ 0.938287] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
320[ 0.938435] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
321[ 0.938576] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
322[ 0.938730] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
323[ 0.938860] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
324[ 0.939046] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
325[ 0.939248] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
326[ 0.939268] pci 0000:01:04.0: reg 0x10: [mem 0xf4000000-0xf7ffffff pref]
327[ 0.939277] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
328[ 0.939284] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
329[ 0.939332] pci 0000:01:04.0: supports D1 D2
330[ 0.939434] pci 0000:00:09.0: PCI bridge to [bus 01]
331[ 0.944416] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
332[ 0.944420] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
333[ 0.944423] pci 0000:00:09.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
334[ 0.944537] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
335[ 0.944578] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
336[ 0.944619] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
337[ 0.944699] pci 0000:02:00.0: PME# supported from D3hot D3cold
338[ 0.944795] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
339[ 0.954793] pci 0000:00:0b.0: PCI bridge to [bus 02]
340[ 0.959761] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
341[ 0.959868] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
342[ 0.959899] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
343[ 0.960010] pci 0000:03:00.0: PME# supported from D3hot D3cold
344[ 0.960135] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
345[ 0.970136] pci 0000:00:0c.0: PCI bridge to [bus 03]
346[ 0.975104] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
347[ 0.975178] pci 0000:00:0d.0: PCI bridge to [bus 04]
348[ 0.980218] pci 0000:00:0e.0: PCI bridge to [bus 05]
349[ 0.985204] pci_bus 0000:00: on NUMA node 0
350[ 0.985307] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
351[ 0.991473] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
352[ 0.997621] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
353[ 1.004936] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
354[ 1.012239] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
355[ 1.019543] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
356[ 1.026850] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
357[ 1.032999] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
358[ 1.039145] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
359[ 1.046457] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
360[ 1.053770] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
361[ 1.061120] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
362[ 1.067263] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
363[ 1.073414] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
364[ 1.080727] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.088033] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
366[ 1.095343] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
367[ 1.103863] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
368[ 1.110338] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
369[ 1.116803] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
370[ 1.123284] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
371[ 1.130022] ACPI: Enabled 1 GPEs in block 00 to 1F
372[ 1.135132] vgaarb: setting as boot device: PCI:0000:01:04.0
373[ 1.140802] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
374[ 1.148891] vgaarb: loaded
375[ 1.151606] vgaarb: bridge control possible 0000:01:04.0
376[ 1.157083] PCI: Using ACPI for IRQ routing
377[ 1.161280] PCI: pci_cache_line_size set to 64 bytes
378[ 1.161336] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
379[ 1.161340] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
380[ 1.161673] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
381[ 1.168730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
382[ 1.173791] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
383[ 1.182481] Switched to clocksource hpet
384[ 1.198030] pnp: PnP ACPI init
385[ 1.201156] ACPI: bus type PNP registered
386[ 1.205698] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
387[ 1.205785] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
388[ 1.205869] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
389[ 1.205968] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
390[ 1.206005] pnp 00:04: [dma 2]
391[ 1.206052] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
392[ 1.206074] pnp: PnP ACPI: found 5 devices
393[ 1.210177] ACPI: bus type PNP unregistered
394[ 1.222193] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
395[ 1.232144] pci 0000:00:09.0: PCI bridge to [bus 01]
396[ 1.237121] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
397[ 1.243223] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
398[ 1.250013] pci 0000:00:09.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
399[ 1.257245] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
400[ 1.264473] pci 0000:00:0b.0: PCI bridge to [bus 02]
401[ 1.269444] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
402[ 1.276237] pci 0000:00:0c.0: PCI bridge to [bus 03]
403[ 1.281209] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
404[ 1.288002] pci 0000:00:0d.0: PCI bridge to [bus 04]
405[ 1.292980] pci 0000:00:0e.0: PCI bridge to [bus 05]
406[ 1.297951] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
407[ 1.297954] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
408[ 1.297957] pci_bus 0000:00: resource 6 [mem 0xf4000000-0xf7ffffff]
409[ 1.297959] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
410[ 1.297962] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
411[ 1.297965] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
412[ 1.297967] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
413[ 1.297970] pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf7ffffff pref]
414[ 1.297973] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
415[ 1.297976] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
416[ 1.298111] NET: Registered protocol family 2
417[ 1.303022] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
418[ 1.310726] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
419[ 1.318076] TCP: Hash tables configured (established 65536 bind 65536)
420[ 1.324674] TCP: reno registered
421[ 1.327940] UDP hash table entries: 4096 (order: 5, 131072 bytes)
422[ 1.334150] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
423[ 1.340942] NET: Registered protocol family 1
424[ 1.345696] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
425[ 1.351784] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
426[ 1.357689] pci 0000:00:00.0: Found enabled HT MSI Mapping
427[ 1.363227] pci 0000:00:00.0: Found enabled HT MSI Mapping
428[ 1.368734] pci 0000:00:0b.0: Found disabled HT MSI Mapping
429[ 1.374320] pci 0000:00:00.0: Found enabled HT MSI Mapping
430[ 1.379846] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.385352] pci 0000:00:0c.0: Found disabled HT MSI Mapping
432[ 1.390931] pci 0000:00:00.0: Found enabled HT MSI Mapping
433[ 1.396461] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.401968] pci 0000:00:0d.0: Found disabled HT MSI Mapping
435[ 1.407537] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.413090] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.418598] pci 0000:00:0e.0: Found disabled HT MSI Mapping
438[ 1.424183] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.429710] pci 0000:01:04.0: Video device with shadowed ROM
440[ 1.429719] PCI: CLS 64 bytes, default 64
441[ 1.429826] Unpacking initramfs...
442[ 1.662892] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
443[ 1.670779] PCI-DMA: Disabling AGP.
444[ 1.675865] PCI-DMA: aperture base @ f8000000 size 65536 KB
445[ 1.681448] init_memory_mapping: [mem 0xf8000000-0xfbffffff]
446[ 1.687111] [mem 0xf8000000-0xfbffffff] page 2M
447[ 1.687134] PCI-DMA: using GART IOMMU.
448[ 1.690905] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
449[ 1.703223] platform rtc_cmos: registered platform RTC device (no PNP device found)
450[ 1.711410] microcode: CPU0: patch_level=0x01000084
451[ 1.716304] microcode: CPU1: patch_level=0x01000084
452[ 1.721205] microcode: CPU2: patch_level=0x01000084
453[ 1.726109] microcode: CPU3: patch_level=0x01000084
454[ 1.731011] microcode: CPU4: patch_level=0x01000084
455[ 1.735904] microcode: CPU5: patch_level=0x01000084
456[ 1.740796] microcode: CPU6: patch_level=0x01000084
457[ 1.745692] microcode: CPU7: patch_level=0x01000084
458[ 1.750686] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
459[ 1.759488] LVT offset 1 assigned for vector 0x400
460[ 1.764296] IBS: LVT offset 1 assigned
461[ 1.768086] perf: AMD IBS detected (0x00000007)
462[ 1.773230] futex hash table entries: 2048 (order: 5, 131072 bytes)
463[ 1.779612] audit: initializing netlink subsys (disabled)
464[ 1.785042] audit: type=2000 audit(1448500034.520:1): initialized
465[ 1.791923] HugeTLB registered 2 MB page size, pre-allocated 0 pages
466[ 1.798329] zbud: loaded
467[ 1.801226] VFS: Disk quotas dquot_6.5.2
468[ 1.805198] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
469[ 1.811748] msgmni has been set to 10073
470[ 1.816222] alg: No test for stdrng (krng)
471[ 1.820388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
472[ 1.827890] io scheduler noop registered
473[ 1.831824] io scheduler deadline registered
474[ 1.836175] io scheduler cfq registered (default)
475[ 1.841097] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
476[ 1.841221] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
477[ 1.841354] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
478[ 1.841479] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
479[ 1.841643] aer 0000:00:0b.0:pcie02: service driver aer loaded
480[ 1.841671] aer 0000:00:0c.0:pcie02: service driver aer loaded
481[ 1.841695] aer 0000:00:0d.0:pcie02: service driver aer loaded
482[ 1.841720] aer 0000:00:0e.0:pcie02: service driver aer loaded
483[ 1.841741] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
484[ 1.848712] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
485[ 1.855247] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
486[ 1.855258] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
487[ 1.862220] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
488[ 1.868754] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
489[ 1.868764] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
490[ 1.875727] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
491[ 1.875739] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
492[ 1.882702] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
493[ 1.882732] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
494[ 1.888338] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
495[ 1.895075] GHES: HEST is not enabled!
496[ 1.898962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
497[ 1.925555] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
498[ 1.953225] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
499[ 1.961171] Linux agpgart interface v0.103
500[ 1.965482] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
501[ 1.975844] serio: i8042 KBD port at 0x60,0x64 irq 1
502[ 1.980833] serio: i8042 AUX port at 0x60,0x64 irq 12
503[ 1.986129] mousedev: PS/2 mouse device common for all mice
504[ 1.991800] rtc_cmos rtc_cmos: RTC can wake from S4
505[ 1.996914] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
506[ 2.003324] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
507[ 2.011263] ledtrig-cpu: registered to indicate activity on CPUs
508[ 2.017520] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
509[ 2.023972] AMD IOMMUv2 functionality not available on this system
510[ 2.030352] TCP: cubic registered
511[ 2.030656] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
512[ 2.042499] NET: Registered protocol family 10
513[ 2.047353] mip6: Mobile IPv6
514[ 2.050344] NET: Registered protocol family 17
515[ 2.054811] mpls_gso: MPLS GSO support
516[ 2.059375] registered taskstats version 1
517[ 2.064261] rtc_cmos rtc_cmos: setting system clock to 2015-11-26 01:07:16 UTC (1448500036)
518[ 2.072707] PM: Hibernation image not present or could not be loaded.
519[ 2.074533] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
520[ 2.082368] Write protecting the kernel read-only data: 8192k
521[ 2.091610] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
522[ 2.100208] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
523[ 2.124326] systemd-udevd[99]: starting version 215
524[ 2.130110] random: systemd-udevd urandom read with 3 bits of entropy available
525[ 2.160048] ACPI: bus type USB registered
526[ 2.164271] usbcore: registered new interface driver usbfs
527[ 2.169857] usbcore: registered new interface driver hub
528[ 2.175413] pps_core: LinuxPPS API ver. 1 registered
529[ 2.175434] usbcore: registered new device driver usb
530[ 2.185459] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
531[ 2.195291] PTP clock support registered
532[ 2.199535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
533[ 2.206930] ehci-pci: EHCI PCI platform driver
534[ 2.211816] ehci-pci 0000:00:02.1: EHCI Host Controller
535[ 2.211890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
536[ 2.223310] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
537[ 2.230758] ehci-pci 0000:00:02.1: debug port 1
538[ 2.235396] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
539[ 2.235433] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
540[ 2.241247] tg3.c:v3.137 (May 11, 2014)
541[ 2.245101] tg3 0000:02:00.0: enabling device (0004 -> 0006)
542[ 2.250937] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
543[ 2.256695] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
544[ 2.262620] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
545[ 2.269413] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
546[ 2.276639] usb usb1: Product: EHCI Host Controller
547[ 2.281525] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
548[ 2.287622] usb usb1: SerialNumber: 0000:00:02.1
549[ 2.292459] hub 1-0:1.0: USB hub found
550[ 2.296227] hub 1-0:1.0: 10 ports detected
551[ 2.301232] ohci-pci: OHCI PCI platform driver
552[ 2.305899] ohci-pci 0000:00:02.0: OHCI PCI host controller
553[ 2.311486] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
554[ 2.318934] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
555[ 2.337282] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
556[ 2.347547] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
557[ 2.357279] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
558[ 2.365111] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
559[ 2.371960] tg3 0000:03:00.0: enabling device (0004 -> 0006)
560[ 2.377775] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
561[ 2.380153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
562[ 2.380156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
563[ 2.380158] usb usb2: Product: OHCI PCI host controller
564[ 2.380159] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
565[ 2.380160] usb usb2: SerialNumber: 0000:00:02.0
566[ 2.380410] hub 2-0:1.0: USB hub found
567[ 2.380422] hub 2-0:1.0: 10 ports detected
568[ 2.458441] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
569[ 2.468698] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
570[ 2.478434] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
571[ 2.486265] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
572[ 2.500259] FS-Cache: Loaded
573[ 2.506823] RPC: Registered named UNIX socket transport module.
574[ 2.513464] RPC: Registered udp transport module.
575[ 2.519560] RPC: Registered tcp transport module.
576[ 2.525650] RPC: Registered tcp NFSv4.1 backchannel transport module.
577[ 2.538060] FS-Cache: Netfs 'nfs' registered for caching
578[ 2.555696] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
579[ 2.602117] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
580[ 2.701974] tsc: Refined TSC clocksource calibration: 1909.786 MHz
581[ 3.705735] Switched to clocksource tsc
582[ 4.211656] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
583[ 4.218189] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
584[ 4.225074] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
585[ 5.072109] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
586[ 5.086188] systemd[1]: Detected architecture 'x86-64'.
587[ 5.310129] systemd[1]: Inserted module 'autofs4'
588[ 5.316225] systemd[1]: Set hostname to <cb-test-tgt>.
589[ 5.403072] random: nonblocking pool is initialized
590[ 5.561002] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
591[ 5.573728] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
592[ 5.589124] systemd[1]: Expecting device dev-ttyS0.device...
593[ 5.605109] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
594[ 5.612880] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
595[ 5.620483] systemd[1]: Starting Remote File Systems (Pre).
596[ 5.637018] systemd[1]: Reached target Remote File Systems (Pre).
597[ 5.643142] systemd[1]: Starting Encrypted Volumes.
598[ 5.657007] systemd[1]: Reached target Encrypted Volumes.
599[ 5.662466] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
600[ 5.684980] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
601[ 5.694403] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
602[ 5.702461] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
603[ 5.710393] systemd[1]: Starting Paths.
604[ 5.724965] systemd[1]: Reached target Paths.
605[ 5.729355] systemd[1]: Starting Swap.
606[ 5.740975] systemd[1]: Reached target Swap.
607[ 5.745267] systemd[1]: Starting Root Slice.
608[ 5.756965] systemd[1]: Created slice Root Slice.
609[ 5.761696] systemd[1]: Starting User and Session Slice.
610[ 5.777034] systemd[1]: Created slice User and Session Slice.
611[ 5.782849] systemd[1]: Starting Delayed Shutdown Socket.
612[ 5.796936] systemd[1]: Listening on Delayed Shutdown Socket.
613[ 5.802714] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
614[ 5.820948] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
615[ 5.827930] systemd[1]: Starting Journal Socket (/dev/log).
616[ 5.844928] systemd[1]: Listening on Journal Socket (/dev/log).
617[ 5.850892] systemd[1]: Starting udev Kernel Socket.
618[ 5.864916] systemd[1]: Listening on udev Kernel Socket.
619[ 5.870261] systemd[1]: Starting udev Control Socket.
620[ 5.884922] systemd[1]: Listening on udev Control Socket.
621[ 5.890347] systemd[1]: Starting Journal Socket.
622[ 5.904896] systemd[1]: Listening on Journal Socket.
623[ 5.909902] systemd[1]: Starting System Slice.
624[ 5.924894] systemd[1]: Created slice System Slice.
625[ 5.929805] systemd[1]: Starting system-getty.slice.
626[ 5.944905] systemd[1]: Created slice system-getty.slice.
627[ 5.950328] systemd[1]: Starting system-serial\x2dgetty.slice.
628[ 5.964883] systemd[1]: Created slice system-serial\x2dgetty.slice.
629[ 5.971197] systemd[1]: Starting Increase datagram queue length...
630[ 5.990390] systemd[1]: Starting udev Coldplug all Devices...
631[ 6.036983] systemd[1]: Starting Load Kernel Modules...
632[ 6.223390] systemd[1]: Started Set Up Additional Binary Formats.
633[ 6.229972] systemd[1]: Mounting Debug File System...
634[ 6.246713] systemd[1]: Starting Create list of required static device nodes for the current kernel...
635[ 6.270928] systemd[1]: Mounting POSIX Message Queue File System...
636[ 6.290066] systemd[1]: Mounting Huge Pages File System...
637[ 6.306131] systemd[1]: Starting Slices.
638[ 6.320847] systemd[1]: Reached target Slices.
639[ 6.325409] systemd[1]: Starting Remount Root and Kernel File Systems...
640[ 6.356767] systemd[1]: Mounted Huge Pages File System.
641[ 6.372833] systemd[1]: Mounted POSIX Message Queue File System.
642[ 6.388739] systemd[1]: Mounted Debug File System.
643[ 6.404763] systemd[1]: Started Increase datagram queue length.
644[ 6.420791] systemd[1]: Started Load Kernel Modules.
645[ 6.440789] systemd[1]: Started Create list of required static device nodes for the current kernel.
646[ 6.464830] systemd[1]: Started Remount Root and Kernel File Systems.
647[ 6.480762] systemd[1]: Started udev Coldplug all Devices.
648[ 6.526490] systemd[1]: Started Various fixups to make systemd work better on Debian.
649[ 6.534354] systemd[1]: Starting Load/Save Random Seed...
650[ 6.550307] systemd[1]: Starting Create Static Device Nodes in /dev...
651[ 6.570157] systemd[1]: Starting Apply Kernel Variables...
652[ 6.586365] systemd[1]: Mounted Configuration File System.
653[ 6.591965] systemd[1]: Mounted FUSE Control File System.
654[ 6.597387] systemd[1]: Starting Syslog Socket.
655[ 6.612723] systemd[1]: Listening on Syslog Socket.
656[ 6.617779] systemd[1]: Starting Sockets.
657[ 6.632697] systemd[1]: Reached target Sockets.
658[ 6.637321] systemd[1]: Starting Journal Service...
659[ 6.660741] systemd[1]: Started Journal Service.
660[ 6.796606] systemd-udevd[190]: starting version 215
661[ 7.073101] systemd-journald[189]: Received request to flush runtime journal from PID 1
662[ 7.484715] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
663[ 7.492620] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
664[ 7.500769] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
665[ 7.537822] SCSI subsystem initialized
666[ 7.628594] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
667[ 7.636983] ACPI: Power Button [PWRB]
668[ 7.640872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
669[ 7.640986] EDAC MC: Ver: 3.0.0
670[ 7.651454] ACPI: Power Button [PWRF]
671[ 7.687938] libata version 3.00 loaded.
672[ 7.688746] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
673[ 7.694239] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
674[ 7.694306] MCE: In-kernel MCE decoding enabled.
675[ 7.696324] FDC 0 is a post-1991 82077
676[ 7.709525] pata_amd 0000:00:06.0: version 0.4.1
677[ 7.709724] acpi-cpufreq: overriding BIOS provided _PSD data
678[ 7.709973] input: PC Speaker as /devices/platform/pcspkr/input/input4
679[ 7.710366] scsi0 : pata_amd
680[ 7.725308] scsi1 : pata_amd
681[ 7.728452] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
682[ 7.735435] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
683[ 7.742664] sata_nv 0000:00:07.0: version 3.5
684[ 7.743097] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
685[ 7.750046] scsi2 : sata_nv
686[ 7.753238] scsi3 : sata_nv
687[ 7.756193] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
688[ 7.763348] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
689[ 7.771012] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
690[ 7.777665] scsi4 : sata_nv
691[ 7.780829] AMD64 EDAC driver v3.4.0
692[ 7.781246] scsi5 : sata_nv
693[ 7.781547] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
694[ 7.781550] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
695[ 7.801722] EDAC amd64: DRAM ECC enabled.
696[ 7.805860] EDAC amd64: F10h detected (node 0).
697[ 7.810590] EDAC MC: DCT0 chip selects:
698[ 7.810594] EDAC amd64: MC: 0: 0MB 1: 0MB
699[ 7.815347] EDAC amd64: MC: 2: 0MB 3: 0MB
700[ 7.820093] EDAC amd64: MC: 4: 0MB 5: 0MB
701[ 7.824847] EDAC amd64: MC: 6: 1024MB 7: 1024MB
702[ 7.829585] EDAC MC: DCT1 chip selects:
703[ 7.829587] EDAC amd64: MC: 0: 0MB 1: 0MB
704[ 7.834331] EDAC amd64: MC: 2: 0MB 3: 0MB
705[ 7.839083] EDAC amd64: MC: 4: 0MB 5: 0MB
706[ 7.843767] EDAC amd64: MC: 6: 1024MB 7: 1024MB
707[ 7.848537] EDAC amd64: using x4 syndromes.
708[ 7.852772] EDAC amd64: MCT channel count: 2
709[ 7.858635] EDAC amd64: CS6: Registered DDR2 RAM
710[ 7.858833] kvm: Nested Virtualization enabled
711[ 7.858841] kvm: Nested Paging enabled
712[ 7.872658] EDAC amd64: CS7: Registered DDR2 RAM
713[ 7.878882] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
714[ 7.888654] EDAC amd64: DRAM ECC enabled.
715[ 7.892703] EDAC amd64: F10h detected (node 1).
716[ 7.897302] EDAC MC: DCT0 chip selects:
717[ 7.897306] EDAC amd64: MC: 0: 1024MB 1: 0MB
718[ 7.902033] EDAC amd64: MC: 2: 0MB 3: 0MB
719[ 7.906758] EDAC amd64: MC: 4: 0MB 5: 0MB
720[ 7.911479] EDAC amd64: MC: 6: 0MB 7: 0MB
721[ 7.916199] EDAC MC: DCT1 chip selects:
722[ 7.916202] EDAC amd64: MC: 0: 0MB 1: 0MB
723[ 7.920911] EDAC amd64: MC: 2: 0MB 3: 0MB
724[ 7.925613] EDAC amd64: MC: 4: 0MB 5: 0MB
725[ 7.930326] EDAC amd64: MC: 6: 0MB 7: 0MB
726[ 7.935028] EDAC amd64: using x4 syndromes.
727[ 7.939214] EDAC amd64: MCT channel count: 1
728[ 7.943579] EDAC amd64: CS0: Registered DDR2 RAM
729[ 7.948487] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
730[ 7.958262] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
731[ 8.080117] ata3: SATA link down (SStatus 0 SControl 300)
732[ 8.092131] ata5: SATA link down (SStatus 0 SControl 300)
733[ 8.396036] ata4: SATA link down (SStatus 0 SControl 300)
734[ 8.715895] ata6: SATA link down (SStatus 0 SControl 300)
735[ 38.651021] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****