Gitiles
Code Review Sign In
review.coreboot.org / board-status / 7f6db60d40cdb040f38f3ffb3de6c37f6a6b1db9 / . / asus / kfsn4-dre / 4.1-849-g8eb63fa / 2015-10-25T06:33:24Z / kernel_log.txt
blob: bb191467c7f2d6fe1d4a60ef4827cb2b77988659 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand36128f02015-10-25 06:51:49 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-849-g8eb63fa-dirty 10/25/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xa5ea000000-0xa5ebffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [ttyS0] enabled
182[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
183[ 0.000000] hpet clockevent registered
184[ 0.000000] tsc: Fast TSC calibration using PIT
Raptor Engineering Automated Coreboot Test Stand9dbf2da2015-10-25 07:20:03 +0000[diff] [blame]185[ 0.000000] tsc: Detected 1909.879 MHz processor
186[ 0.000156] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.75 BogoMIPS (lpj=7639516)
Raptor Engineering Automated Coreboot Test Stand36128f02015-10-25 06:51:49 +0000[diff] [blame]187[ 0.010795] pid_max: default: 32768 minimum: 301
188[ 0.015450] ACPI: Core revision 20140424
Raptor Engineering Automated Coreboot Test Stand9dbf2da2015-10-25 07:20:03 +0000[diff] [blame]189[ 0.021806] ACPI: All ACPI Tables successfully acquired
190[ 0.027170] Security Framework initialized
191[ 0.031298] AppArmor: AppArmor disabled by boot time parameter
192[ 0.037133] Yama: disabled by default; enable with sysctl kernel.yama.*
193[ 0.044869] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
194[ 0.058120] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
195[ 0.067861] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
196[ 0.074763] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.082613] Initializing cgroup subsys memory
198[ 0.086986] Initializing cgroup subsys devices
199[ 0.091454] Initializing cgroup subsys freezer
200[ 0.095919] Initializing cgroup subsys net_cls
201[ 0.100378] Initializing cgroup subsys blkio
202[ 0.104662] Initializing cgroup subsys perf_event
203[ 0.109372] Initializing cgroup subsys net_prio
204[ 0.113952] tseg: 0000000000
205[ 0.113966] CPU: Physical Processor ID: 0
206[ 0.117984] CPU: Processor Core ID: 0
207[ 0.121665] mce: CPU supports 6 MCE banks
208[ 0.125694] LVT offset 0 assigned for vector 0xf9
209[ 0.130421] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Raptor Engineering Automated Coreboot Test Stand36128f02015-10-25 06:51:49 +0000[diff] [blame]210Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
211tlb_flushall_shift: 6
Raptor Engineering Automated Coreboot Test Stand9dbf2da2015-10-25 07:20:03 +0000[diff] [blame]212[ 0.145761] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
213[ 0.154763] ftrace: allocating 21601 entries in 85 pages
214[ 0.170125] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
215[ 0.215649] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
216[ 0.332510] Performance Events: AMD PMU driver.
217[ 0.337089] ... version: 0
218[ 0.341103] ... bit width: 48
219[ 0.345200] ... generic registers: 4
220[ 0.349212] ... value mask: 0000ffffffffffff
221[ 0.354521] ... max period: 00007fffffffffff
222[ 0.359832] ... fixed-purpose events: 0
223[ 0.363861] ... event mask: 000000000000000f
224[ 0.371786] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
225[ 0.379987] x86: Booting SMP configuration:
226[ 0.384180] .... node #0, CPUs: #1 #2 #3
227[ 0.428520] .... node #1, CPUs: #4 #5 #6 #7
228[ 0.581156] x86: Booted up 2 nodes, 8 CPUs
229[ 0.585456] smpboot: Total of 8 processors activated (30558.27 BogoMIPS)
230[ 0.598028] devtmpfs: initialized
231[ 0.609940] pinctrl core: initialized pinctrl subsystem
232[ 0.615333] NET: Registered protocol family 16
233[ 0.619988] cpuidle: using governor ladder
234[ 0.624097] cpuidle: using governor menu
235[ 0.628033] node 0 link 1: io port [1000, 3fff]
236[ 0.628036] TOM: 00000000c0000000 aka 3072M
237[ 0.632230] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
238[ 0.632234] node 0 link 1: mmio [fc000000, fc3fffff]
239[ 0.632238] node 0 link 1: mmio [f8000000, fbffffff]
240[ 0.632240] TOM2: 0000000180000000 aka 6144M
241[ 0.636519] bus: [bus 00-05] on node 0 link 1
242[ 0.636521] bus: 00 [io 0x0000-0xffff]
243[ 0.636523] bus: 00 [mem 0xd0000000-0xffffffff]
244[ 0.636524] bus: 00 [mem 0x180000000-0xfcffffffff]
245[ 0.636631] ACPI: bus type PCI registered
246[ 0.640651] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
247[ 0.647245] PCI: Using configuration type 1 for base access
248[ 0.652822] PCI: Using configuration type 1 for extended access
249[ 0.659351] mtrr: your CPUs had inconsistent variable MTRR settings
250[ 0.665618] mtrr: probably your BIOS does not setup all CPUs.
251[ 0.671362] mtrr: corrected configuration.
252[ 0.685300] ACPI: Added _OSI(Module Device)
253[ 0.689490] ACPI: Added _OSI(Processor Device)
254[ 0.693940] ACPI: Added _OSI(3.0 _SCP Extensions)
255[ 0.698645] ACPI: Added _OSI(Processor Aggregator Device)
256[ 0.707630] ACPI: Interpreter enabled
257[ 0.711316] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
258[ 0.720590] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
259[ 0.729853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
260[ 0.739124] ACPI: (supports S0 S1 S5)
261[ 0.742795] ACPI: Using IOAPIC for interrupt routing
262[ 0.747802] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
263[ 0.776246] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
264[ 0.782437] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
265[ 0.790651] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
266[ 0.828126] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
267[ 0.838124] PCI host bridge to bus 0000:00
268[ 0.842229] pci_bus 0000:00: root bus resource [bus 00-05]
269[ 0.847720] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
270[ 0.853898] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
271[ 0.860776] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.867646] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.874518] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.880716] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.880911] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.880918] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.881076] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.881084] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.881108] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.881127] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.881171] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.881271] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.881281] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.881317] pci 0000:00:02.0: supports D1 D2
285[ 0.881336] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.881395] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.887113] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.887124] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.887174] pci 0000:00:02.1: supports D1 D2
290[ 0.887184] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.887260] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.892989] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.893016] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.893060] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.900196] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.906730] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.913867] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.920492] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.920507] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.920517] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.920525] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.920531] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.920536] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.920541] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.920676] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.920686] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.920691] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.920696] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.920700] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.920705] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.920710] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.920843] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.920946] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.926675] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.926724] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.926770] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.932491] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.932543] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.932597] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.938313] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.938363] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.938411] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.944127] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.944176] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.944233] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.949957] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.950084] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.950190] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.950295] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.950485] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.950591] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.950728] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.950843] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.950964] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.951106] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.951298] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.951317] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.951332] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.951339] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.951386] pci 0000:01:04.0: supports D1 D2
341[ 0.951493] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.956469] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.956472] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.956475] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.956591] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.956634] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.956670] pci 0000:02:00.0: reg 0x30: [mem 0x21400000-0x2140ffff pref]
348[ 0.956747] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.956857] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.966863] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.971830] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.971923] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.971949] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.972059] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.972158] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.982160] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.987131] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.987207] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.992256] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 0.997262] pci_bus 0000:00: on NUMA node 0
361[ 0.997362] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.003505] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.009664] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.016973] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.024290] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.031581] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.038898] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.045048] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.051210] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.058522] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.065835] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.073162] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.079307] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.085487] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.092818] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.100165] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.107484] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.116037] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.122549] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.129034] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.135520] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.142245] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.147362] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.153028] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.161123] vgaarb: loaded
386[ 1.163842] vgaarb: bridge control possible 0000:01:04.0
387[ 1.169326] PCI: Using ACPI for IRQ routing
388[ 1.173523] PCI: pci_cache_line_size set to 64 bytes
389[ 1.173581] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.173584] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.173896] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.180947] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.186009] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.194686] Switched to clocksource hpet
395[ 1.210257] pnp: PnP ACPI init
396[ 1.213371] ACPI: bus type PNP registered
397[ 1.217934] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.218014] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.218112] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.218190] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.218230] pnp 00:04: [dma 2]
402[ 1.218271] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.218293] pnp: PnP ACPI: found 5 devices
404[ 1.222402] ACPI: bus type PNP unregistered
405[ 1.234416] pci 0000:02:00.0: can't claim BAR 6 [mem 0x21400000-0x2140ffff pref]: no compatible bridge window
406[ 1.244372] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.249348] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.255446] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.262240] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.269469] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.276697] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.281670] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.288462] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.293435] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.300228] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.305201] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.310176] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.310178] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
419[ 1.310181] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
420[ 1.310184] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
421[ 1.310186] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
422[ 1.310189] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
423[ 1.310192] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
424[ 1.310194] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
425[ 1.310197] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
426[ 1.310200] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
427[ 1.310329] NET: Registered protocol family 2
428[ 1.315206] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
429[ 1.322901] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
430[ 1.330241] TCP: Hash tables configured (established 65536 bind 65536)
431[ 1.336852] TCP: reno registered
432[ 1.340105] UDP hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.346320] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.353100] NET: Registered protocol family 1
435[ 1.357847] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
436[ 1.363938] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
437[ 1.369847] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.375382] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.380889] pci 0000:00:0b.0: Found disabled HT MSI Mapping
440[ 1.386471] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.392015] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.397520] pci 0000:00:0c.0: Found disabled HT MSI Mapping
443[ 1.403109] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.408638] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.414139] pci 0000:00:0d.0: Found disabled HT MSI Mapping
446[ 1.419723] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.425273] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.430773] pci 0000:00:0e.0: Found disabled HT MSI Mapping
449[ 1.436354] pci 0000:00:00.0: Found enabled HT MSI Mapping
450[ 1.441881] pci 0000:01:04.0: Video device with shadowed ROM
451[ 1.441889] PCI: CLS 64 bytes, default 64
452[ 1.441997] Unpacking initramfs...
453[ 1.674753] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
454[ 1.682583] PCI-DMA: Disabling AGP.
455[ 1.687666] PCI-DMA: aperture base @ b4000000 size 65536 KB
456[ 1.693250] PCI-DMA: using GART IOMMU.
457[ 1.697007] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
458[ 1.709040] platform rtc_cmos: registered platform RTC device (no PNP device found)
459[ 1.717219] microcode: CPU0: patch_level=0x00000000
460[ 1.722108] microcode: CPU1: patch_level=0x00000000
461[ 1.727003] microcode: CPU2: patch_level=0x00000000
462[ 1.731905] microcode: CPU3: patch_level=0x00000000
463[ 1.736812] microcode: CPU4: patch_level=0x00000000
464[ 1.741709] microcode: CPU5: patch_level=0x00000000
465[ 1.746611] microcode: CPU6: patch_level=0x00000000
466[ 1.751506] microcode: CPU7: patch_level=0x00000000
467[ 1.756491] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
468[ 1.765293] LVT offset 1 assigned for vector 0x400
469[ 1.770106] IBS: LVT offset 1 assigned
470[ 1.773889] perf: AMD IBS detected (0x00000007)
471[ 1.779047] futex hash table entries: 2048 (order: 5, 131072 bytes)
472[ 1.785440] audit: initializing netlink subsys (disabled)
473[ 1.790865] audit: type=2000 audit(1445757289.520:1): initialized
474[ 1.797745] HugeTLB registered 2 MB page size, pre-allocated 0 pages
475[ 1.804151] zbud: loaded
476[ 1.807037] VFS: Disk quotas dquot_6.5.2
477[ 1.811005] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
478[ 1.817546] msgmni has been set to 9945
479[ 1.821923] alg: No test for stdrng (krng)
480[ 1.826092] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
481[ 1.833591] io scheduler noop registered
482[ 1.837525] io scheduler deadline registered
483[ 1.841882] io scheduler cfq registered (default)
484[ 1.846803] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
485[ 1.846927] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
486[ 1.847053] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
487[ 1.847170] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
488[ 1.847331] aer 0000:00:0b.0:pcie02: service driver aer loaded
489[ 1.847360] aer 0000:00:0c.0:pcie02: service driver aer loaded
490[ 1.847385] aer 0000:00:0d.0:pcie02: service driver aer loaded
491[ 1.847412] aer 0000:00:0e.0:pcie02: service driver aer loaded
492[ 1.847432] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
493[ 1.854404] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
494[ 1.860931] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
495[ 1.860942] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
496[ 1.867905] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
497[ 1.874441] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
498[ 1.874452] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
499[ 1.881421] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
500[ 1.881431] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
501[ 1.888395] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
502[ 1.888425] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
503[ 1.894031] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
504[ 1.900766] GHES: HEST is not enabled!
505[ 1.904656] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
506[ 1.931246] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
507[ 1.958928] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
508[ 1.966858] Linux agpgart interface v0.103
509[ 1.971172] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
510[ 1.981664] serio: i8042 KBD port at 0x60,0x64 irq 1
511[ 1.986657] serio: i8042 AUX port at 0x60,0x64 irq 12
512[ 1.991947] mousedev: PS/2 mouse device common for all mice
513[ 1.997617] rtc_cmos rtc_cmos: RTC can wake from S4
514[ 2.002733] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
515[ 2.009129] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
516[ 2.017008] ledtrig-cpu: registered to indicate activity on CPUs
517[ 2.023281] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
518[ 2.029728] AMD IOMMUv2 functionality not available on this system
519[ 2.036095] TCP: cubic registered
520[ 2.039554] NET: Registered protocol family 10
521[ 2.044371] mip6: Mobile IPv6
522[ 2.045873] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.055956] NET: Registered protocol family 17
524[ 2.060417] mpls_gso: MPLS GSO support
525[ 2.065014] registered taskstats version 1
526[ 2.069870] rtc_cmos rtc_cmos: setting system clock to 2015-10-25 07:14:50 UTC (1445757290)
527[ 2.078296] PM: Hibernation image not present or could not be loaded.
528[ 2.080099] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
529[ 2.087957] Write protecting the kernel read-only data: 8192k
530[ 2.097181] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
531[ 2.105772] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
532[ 2.129679] systemd-udevd[99]: starting version 215
533[ 2.135474] random: systemd-udevd urandom read with 4 bits of entropy available
534[ 2.167190] pps_core: LinuxPPS API ver. 1 registered
535[ 2.172214] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.181730] ACPI: bus type USB registered
537[ 2.185965] usbcore: registered new interface driver usbfs
538[ 2.186023] PTP clock support registered
539[ 2.195502] usbcore: registered new interface driver hub
540[ 2.201047] usbcore: registered new device driver usb
541[ 2.201148] tg3.c:v3.137 (May 11, 2014)
542[ 2.201160] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.201366] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
544[ 2.222381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
545[ 2.229469] ehci-pci: EHCI PCI platform driver
546[ 2.234221] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
547[ 2.234261] ehci-pci 0000:00:02.1: EHCI Host Controller
548[ 2.234277] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
549[ 2.234297] ehci-pci 0000:00:02.1: debug port 1
550[ 2.234356] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
551[ 2.234384] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
552[ 2.246358] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
553[ 2.246445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
554[ 2.246447] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
555[ 2.246449] usb usb1: Product: EHCI Host Controller
556[ 2.246450] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
557[ 2.246451] usb usb1: SerialNumber: 0000:00:02.1
558[ 2.246845] hub 1-0:1.0: USB hub found
559[ 2.246855] hub 1-0:1.0: 10 ports detected
560[ 2.307098] ohci-pci: OHCI PCI platform driver
561[ 2.311870] ohci-pci 0000:00:02.0: OHCI PCI host controller
562[ 2.317485] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
563[ 2.324935] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
564[ 2.345527] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
565[ 2.355786] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
566[ 2.365520] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
567[ 2.373351] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
568[ 2.380168] tg3 0000:03:00.0: enabling device (0004 -> 0006)
569[ 2.385993] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
570[ 2.393803] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
571[ 2.400593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
572[ 2.407815] usb usb2: Product: OHCI PCI host controller
573[ 2.413048] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
574[ 2.419147] usb usb2: SerialNumber: 0000:00:02.0
575[ 2.423952] hub 2-0:1.0: USB hub found
576[ 2.427715] hub 2-0:1.0: 10 ports detected
577[ 2.474918] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
578[ 2.485187] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
579[ 2.494923] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
580[ 2.502753] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
581[ 2.515860] FS-Cache: Loaded
582[ 2.523023] RPC: Registered named UNIX socket transport module.
583[ 2.529535] RPC: Registered udp transport module.
584[ 2.535632] RPC: Registered tcp transport module.
585[ 2.541731] RPC: Registered tcp NFSv4.1 backchannel transport module.
586[ 2.554236] FS-Cache: Netfs 'nfs' registered for caching
587[ 2.568444] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
588[ 2.614328] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
589[ 2.706178] tsc: Refined TSC clocksource calibration: 1909.787 MHz
590[ 3.709924] Switched to clocksource tsc
591[ 4.247863] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
592[ 4.254394] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
593[ 4.261279] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
594[ 5.072394] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
595[ 5.086189] systemd[1]: Detected architecture 'x86-64'.
596[ 5.307223] systemd[1]: Inserted module 'autofs4'
597[ 5.313269] systemd[1]: Set hostname to <cb-test-tgt>.
598[ 5.391584] random: nonblocking pool is initialized
599[ 5.555761] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
600[ 5.568498] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
601[ 5.583882] systemd[1]: Expecting device dev-ttyS0.device...
602[ 5.597318] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
603[ 5.605106] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
604[ 5.612715] systemd[1]: Starting Remote File Systems (Pre).
605[ 5.629229] systemd[1]: Reached target Remote File Systems (Pre).
606[ 5.635351] systemd[1]: Starting Encrypted Volumes.
607[ 5.649206] systemd[1]: Reached target Encrypted Volumes.
608[ 5.654670] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
609[ 5.677193] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
610[ 5.686616] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
611[ 5.694676] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
612[ 5.702604] systemd[1]: Starting Paths.
613[ 5.717179] systemd[1]: Reached target Paths.
614[ 5.721578] systemd[1]: Starting Swap.
615[ 5.733185] systemd[1]: Reached target Swap.
616[ 5.737482] systemd[1]: Starting Root Slice.
617[ 5.749178] systemd[1]: Created slice Root Slice.
618[ 5.753903] systemd[1]: Starting User and Session Slice.
619[ 5.769155] systemd[1]: Created slice User and Session Slice.
620[ 5.774926] systemd[1]: Starting Delayed Shutdown Socket.
621[ 5.789237] systemd[1]: Listening on Delayed Shutdown Socket.
622[ 5.795053] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
623[ 5.813138] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
624[ 5.820126] systemd[1]: Starting Journal Socket (/dev/log).
625[ 5.837140] systemd[1]: Listening on Journal Socket (/dev/log).
626[ 5.843095] systemd[1]: Starting udev Kernel Socket.
627[ 5.857203] systemd[1]: Listening on udev Kernel Socket.
628[ 5.862600] systemd[1]: Starting udev Control Socket.
629[ 5.877112] systemd[1]: Listening on udev Control Socket.
630[ 5.882564] systemd[1]: Starting Journal Socket.
631[ 5.897108] systemd[1]: Listening on Journal Socket.
632[ 5.902128] systemd[1]: Starting System Slice.
633[ 5.917098] systemd[1]: Created slice System Slice.
634[ 5.921999] systemd[1]: Starting system-getty.slice.
635[ 5.937110] systemd[1]: Created slice system-getty.slice.
636[ 5.942532] systemd[1]: Starting system-serial\x2dgetty.slice.
637[ 5.957099] systemd[1]: Created slice system-serial\x2dgetty.slice.
638[ 5.963409] systemd[1]: Starting Increase datagram queue length...
639[ 5.981911] systemd[1]: Starting udev Coldplug all Devices...
640[ 6.205771] systemd[1]: Starting Load Kernel Modules...
641[ 6.232954] systemd[1]: Started Set Up Additional Binary Formats.
642[ 6.239289] systemd[1]: Mounting Debug File System...
643[ 6.254857] systemd[1]: Starting Create list of required static device nodes for the current kernel...
644[ 6.278871] systemd[1]: Mounting POSIX Message Queue File System...
645[ 6.298099] systemd[1]: Mounting Huge Pages File System...
646[ 6.314379] systemd[1]: Starting Slices.
647[ 6.329068] systemd[1]: Reached target Slices.
648[ 6.333609] systemd[1]: Starting Remount Root and Kernel File Systems...
649[ 6.365022] systemd[1]: Mounted Huge Pages File System.
650[ 6.381057] systemd[1]: Mounted POSIX Message Queue File System.
651[ 6.397007] systemd[1]: Mounted Debug File System.
652[ 6.412975] systemd[1]: Started Increase datagram queue length.
653[ 6.429042] systemd[1]: Started Load Kernel Modules.
654[ 6.449026] systemd[1]: Started Create list of required static device nodes for the current kernel.
655[ 6.469005] systemd[1]: Started Remount Root and Kernel File Systems.
656[ 6.484958] systemd[1]: Started udev Coldplug all Devices.
657[ 6.531119] systemd[1]: Started Various fixups to make systemd work better on Debian.
658[ 6.539041] systemd[1]: Starting Load/Save Random Seed...
659[ 6.554085] systemd[1]: Starting Create Static Device Nodes in /dev...
660[ 6.574140] systemd[1]: Starting Apply Kernel Variables...
661[ 6.590259] systemd[1]: Mounted Configuration File System.
662[ 6.595853] systemd[1]: Mounted FUSE Control File System.
663[ 6.601305] systemd[1]: Starting Syslog Socket.
664[ 6.616954] systemd[1]: Listening on Syslog Socket.
665[ 6.621942] systemd[1]: Starting Sockets.
666[ 6.636933] systemd[1]: Reached target Sockets.
667[ 6.641528] systemd[1]: Starting Journal Service...
668[ 6.668915] systemd[1]: Started Journal Service.
669[ 6.802050] systemd-udevd[192]: starting version 215
670[ 7.069850] systemd-journald[190]: Received request to flush runtime journal from PID 1
671[ 7.514905] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
672[ 7.523004] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
673[ 7.531857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
674[ 7.539637] EDAC MC: Ver: 3.0.0
675[ 7.548037] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
676[ 7.557901] ACPI: Power Button [PWRB]
677[ 7.563017] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
678[ 7.571689] ACPI: Power Button [PWRF]
679[ 7.592475] FDC 0 is a post-1991 82077
680[ 7.614404] MCE: In-kernel MCE decoding enabled.
681[ 7.619506] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
682[ 7.624696] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
683[ 7.652887] SCSI subsystem initialized
684[ 7.657264] acpi-cpufreq: overriding BIOS provided _PSD data
685[ 7.663364] AMD64 EDAC driver v3.4.0
686[ 7.667179] EDAC amd64: DRAM ECC enabled.
687[ 7.671274] EDAC amd64: F10h detected (node 0).
688[ 7.675893] EDAC MC: DCT0 chip selects:
689[ 7.675897] EDAC amd64: MC: 0: 0MB 1: 0MB
690[ 7.680629] EDAC amd64: MC: 2: 0MB 3: 0MB
691[ 7.685334] EDAC amd64: MC: 4: 0MB 5: 0MB
692[ 7.690041] EDAC amd64: MC: 6: 1024MB 7: 1024MB
693[ 7.694775] EDAC MC: DCT1 chip selects:
694[ 7.694789] EDAC amd64: MC: 0: 0MB 1: 0MB
695[ 7.699520] EDAC amd64: MC: 2: 0MB 3: 0MB
696[ 7.704268] EDAC amd64: MC: 4: 0MB 5: 0MB
697[ 7.704658] input: PC Speaker as /devices/platform/pcspkr/input/input4
698[ 7.715530] EDAC amd64: MC: 6: 1024MB 7: 1024MB
699[ 7.720248] EDAC amd64: using x4 syndromes.
700[ 7.724501] EDAC amd64: MCT channel count: 2
701[ 7.728900] EDAC amd64: CS6: Registered DDR2 RAM
702[ 7.733547] EDAC amd64: CS7: Registered DDR2 RAM
703[ 7.738780] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
704[ 7.748709] EDAC amd64: DRAM ECC enabled.
705[ 7.752987] EDAC amd64: F10h detected (node 1).
706[ 7.753260] libata version 3.00 loaded.
707[ 7.757660] EDAC MC: DCT0 chip selects:
708[ 7.757664] EDAC amd64: MC: 0: 1024MB 1: 0MB
709[ 7.762447] EDAC amd64: MC: 2: 0MB 3: 0MB
710[ 7.767209] EDAC amd64: MC: 4: 0MB 5: 0MB
711[ 7.771923] EDAC amd64: MC: 6: 0MB 7: 0MB
712[ 7.776652] EDAC MC: DCT1 chip selects:
713[ 7.776655] EDAC amd64: MC: 0: 0MB 1: 0MB
714[ 7.781406] EDAC amd64: MC: 2: 0MB 3: 0MB
715[ 7.786162] EDAC amd64: MC: 4: 0MB 5: 0MB
716[ 7.790913] EDAC amd64: MC: 6: 0MB 7: 0MB
717[ 7.795674] EDAC amd64: using x4 syndromes.
718[ 7.799909] EDAC amd64: MCT channel count: 1
719[ 7.804270] EDAC amd64: CS0: Registered DDR2 RAM
720[ 7.809264] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
721[ 7.819197] pata_amd 0000:00:06.0: version 0.4.1
722[ 7.819241] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
723[ 7.820066] scsi0 : pata_amd
724[ 7.833306] scsi1 : pata_amd
725[ 7.837233] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
726[ 7.845517] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
727[ 7.853667] sata_nv 0000:00:07.0: version 3.5
728[ 7.853990] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
729[ 7.860055] kvm: Nested Virtualization enabled
730[ 7.860507] scsi2 : sata_nv
731[ 7.860755] scsi3 : sata_nv
732[ 7.860955] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
733[ 7.860959] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
734[ 7.861359] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
735[ 7.862041] scsi4 : sata_nv
736[ 7.862228] scsi5 : sata_nv
737[ 7.862324] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
738[ 7.862327] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
739[ 7.910015] kvm: Nested Paging enabled
740[ 8.172315] ata3: SATA link down (SStatus 0 SControl 300)
741[ 8.172324] ata5: SATA link down (SStatus 0 SControl 300)
742[ 8.492204] ata4: SATA link down (SStatus 0 SControl 300)
743[ 8.808088] ata6: SATA link down (SStatus 0 SControl 300)
744[ 38.628354] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****