blob: 9c607a2a47e300e378ed21a43ea14d60b9970c2a [file] [log] [blame]
Martin Roth77967542016-02-17 20:45:34 -07001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
5[ 0.000000] Command line: initrd=/casper/initrd.lz file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi
6[ 0.000000] KERNEL supported cpus:
7[ 0.000000] Intel GenuineIntel
8[ 0.000000] AMD AuthenticAMD
9[ 0.000000] Centaur CentaurHauls
10[ 0.000000] tseg: 0000000000
11[ 0.000000] e820: BIOS-provided physical RAM map:
12[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c53fff] usable
16[ 0.000000] BIOS-e820: [mem 0x00000000c7c54000-0x00000000dfffffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: AMD Persimmon/Persimmon, BIOS 4.3-250-g85a255f 02/18/2016
22[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24[ 0.000000] AGP: No AGP bridge found
25[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: uncachable
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 000000000 mask F80000000 write-back
33[ 0.000000] 1 base 080000000 mask FC0000000 write-back
34[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
35[ 0.000000] 3 disabled
36[ 0.000000] 4 disabled
37[ 0.000000] 5 disabled
38[ 0.000000] 6 base 0FF800000 mask FFF800000 write-protect
39[ 0.000000] 7 disabled
40[ 0.000000] TOM2: 000000011f000000 aka 4592M
41[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
42[ 0.000000] e820: last_pfn = 0xc7c54 max_arch_pfn = 0x400000000
43[ 0.000000] found SMP MP-table at [mem 0x000f0ce0-0x000f0cef] mapped at [ffff8800000f0ce0]
44[ 0.000000] Scanning 1 areas for low memory corruption
45[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
46[ 0.000000] Using GB pages for direct mapping
47[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
48[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
49[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
50[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
51[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
52[ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
53[ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M
54[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
55[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11edfffff]
56[ 0.000000] [mem 0x100000000-0x11edfffff] page 2M
57[ 0.000000] init_memory_mapping: [mem 0xc0000000-0xc7c53fff]
58[ 0.000000] [mem 0xc0000000-0xc7bfffff] page 2M
59[ 0.000000] [mem 0xc7c00000-0xc7c53fff] page 4k
60[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
61[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
62[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff]
63[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
64[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
65[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
66[ 0.000000] RAMDISK: [mem 0x7eaa3000-0x7fffefff]
67[ 0.000000] ACPI: Early table checksum verification disabled
68[ 0.000000] ACPI: RSDP 0x00000000000F0EB0 000024 (v02 CORE )
69[ 0.000000] ACPI: XSDT 0x00000000C7C6F0E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: FACP 0x00000000C7C719F0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: DSDT 0x00000000C7C6F280 002761 (v02 AMD COREBOOT 00010001 INTL 20150619)
72[ 0.000000] ACPI: FACS 0x00000000C7C6F240 000040
73[ 0.000000] ACPI: SSDT 0x00000000C7C71AF0 000046 (v02 CORE COREBOOT 0000002A CORE 0000002A)
74[ 0.000000] ACPI: TCPA 0x00000000C7C71B40 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
75[ 0.000000] ACPI: APIC 0x00000000C7C71B80 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
76[ 0.000000] ACPI: HEST 0x00000000C7C71BE0 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
77[ 0.000000] ACPI: SSDT 0x00000000C7C71D80 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
78[ 0.000000] ACPI: SSDT 0x00000000C7C73410 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
79[ 0.000000] ACPI: HPET 0x00000000C7C737F0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
80[ 0.000000] ACPI: Local APIC address 0xfee00000
81[ 0.000000] No NUMA configuration found
82[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
83[ 0.000000] NODE_DATA(0) allocated [mem 0x11effb000-0x11effffff]
84[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
85[ 0.000000] Zone ranges:
86[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
87[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
88[ 0.000000] Normal [mem 0x100000000-0x11effffff]
89[ 0.000000] Movable zone start for each node
90[ 0.000000] Early memory node ranges
91[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
92[ 0.000000] node 0: [mem 0x00100000-0xc7c53fff]
93[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
94[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x11effffff]
95[ 0.000000] On node 0 totalpages: 945138
96[ 0.000000] DMA zone: 64 pages used for memmap
97[ 0.000000] DMA zone: 21 pages reserved
98[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
99[ 0.000000] DMA32 zone: 12722 pages used for memmap
100[ 0.000000] DMA32 zone: 814164 pages, LIFO batch:31
101[ 0.000000] Normal zone: 1984 pages used for memmap
102[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
103[ 0.000000] ACPI: PM-Timer IO Port: 0x808
104[ 0.000000] ACPI: Local APIC address 0xfee00000
105[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
106[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
107[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
108[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
109[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
110[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
111[ 0.000000] ACPI: IRQ0 used by override.
112[ 0.000000] ACPI: IRQ9 used by override.
113[ 0.000000] Using ACPI (MADT) for SMP configuration information
114[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
115[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
116[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
117[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
118[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
119[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
120[ 0.000000] PM: Registered nosave memory: [mem 0xc7c54000-0xdfffffff]
121[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
122[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
124[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
125[ 0.000000] Booting paravirtualized kernel on bare hardware
126[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
127[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88011ec00000 s86144 r8192 d32640 u1048576
128[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u1048576 alloc=1*2097152
129[ 0.000000] pcpu-alloc: [0] 0 1
130[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 930347
131[ 0.000000] Policy zone: Normal
132[ 0.000000] Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi
133[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
134[ 0.000000] AGP: Checking aperture...
135[ 0.000000] AGP: No AGP bridge found
136[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
137[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
138[ 0.000000] Memory: 3616404K/3780552K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 164148K reserved, 0K cma-reserved)
139[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
140[ 0.000000] Hierarchical RCU implementation.
141[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
142[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
143[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
144[ 0.000000] NR_IRQS:16640 nr_irqs:440 16
145[ 0.000000] Offload RCU callbacks from all CPUs
146[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
147[ 0.000000] spurious 8259A interrupt: IRQ7.
148[ 0.000000] Console: colour VGA+ 80x25
149[ 0.000000] console [tty0] enabled
150[ 0.000000] hpet clockevent registered
151[ 0.000000] tsc: Fast TSC calibration using PIT
152[ 0.000000] tsc: Detected 1599.987 MHz processor
153[ 0.000057] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.97 BogoMIPS (lpj=6399948)
154[ 0.000064] pid_max: default: 32768 minimum: 301
155[ 0.000080] ACPI: Core revision 20141107
156[ 0.005624] ACPI: All ACPI Tables successfully acquired
157[ 0.005676] Security Framework initialized
158[ 0.005717] AppArmor: AppArmor initialized
159[ 0.005721] Yama: becoming mindful.
160[ 0.006338] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
161[ 0.009166] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
162[ 0.010543] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
163[ 0.010568] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
164[ 0.011099] Initializing cgroup subsys memory
165[ 0.011120] Initializing cgroup subsys devices
166[ 0.011129] Initializing cgroup subsys freezer
167[ 0.011136] Initializing cgroup subsys net_cls
168[ 0.011142] Initializing cgroup subsys blkio
169[ 0.011148] Initializing cgroup subsys perf_event
170[ 0.011155] Initializing cgroup subsys net_prio
171[ 0.011161] Initializing cgroup subsys hugetlb
172[ 0.011210] CPU: Physical Processor ID: 0
173[ 0.011213] CPU: Processor Core ID: 0
174[ 0.011217] mce: CPU supports 6 MCE banks
175[ 0.011236] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
176[ 0.011236] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
177[ 0.011477] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
178[ 0.014809] ftrace: allocating 29988 entries in 118 pages
179[ 0.045500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
180[ 0.085249] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
181[ 0.085292] ...trying to set up timer (IRQ0) through the 8259A ...
182[ 0.085294] ..... (found apic 0 pin 0) ...
183[ 0.125039] ....... failed.
184[ 0.125042] ...trying to set up timer as Virtual Wire IRQ...
185[ 0.164733] ..... works.
186[ 0.164736] smpboot: CPU0: AMD G-T56N Processor (fam: 14, model: 01, stepping: 00)
187[ 0.269554] Performance Events: AMD PMU driver.
188[ 0.269564] ... version: 0
189[ 0.269567] ... bit width: 48
190[ 0.269569] ... generic registers: 4
191[ 0.269571] ... value mask: 0000ffffffffffff
192[ 0.269574] ... max period: 00007fffffffffff
193[ 0.269576] ... fixed-purpose events: 0
194[ 0.269579] ... event mask: 000000000000000f
195[ 0.271388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
196[ 0.271666] x86: Booting SMP configuration:
197[ 0.271671] .... node #0, CPUs: #1
198[ 0.284762] x86: Booted up 1 node, 2 CPUs
199[ 0.284767] smpboot: Total of 2 processors activated (6399.94 BogoMIPS)
200[ 0.285616] devtmpfs: initialized
201[ 0.294525] evm: security.selinux
202[ 0.294529] evm: security.SMACK64
203[ 0.294531] evm: security.SMACK64EXEC
204[ 0.294534] evm: security.SMACK64TRANSMUTE
205[ 0.294536] evm: security.SMACK64MMAP
206[ 0.294538] evm: security.ima
207[ 0.294540] evm: security.capability
208[ 0.295219] pinctrl core: initialized pinctrl subsystem
209[ 0.295516] RTC time: 3:32:45, date: 02/18/16
210[ 0.295793] NET: Registered protocol family 16
211[ 0.297863] cpuidle: using governor ladder
212[ 0.301862] cpuidle: using governor menu
213[ 0.302175] ACPI: bus type PCI registered
214[ 0.302181] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
215[ 0.302397] PCI: Using configuration type 1 for base access
216[ 0.302400] PCI: Using configuration type 1 for extended access
217[ 0.307859] ACPI: Added _OSI(Module Device)
218[ 0.307867] ACPI: Added _OSI(Processor Device)
219[ 0.307871] ACPI: Added _OSI(3.0 _SCP Extensions)
220[ 0.307874] ACPI: Added _OSI(Processor Aggregator Device)
221[ 0.310182] ACPI: Executed 2 blocks of module-level executable AML code
222[ 0.314004] ACPI: Interpreter enabled
223[ 0.314026] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
224[ 0.314054] ACPI: (supports S0 S1 S3 S4 S5)
225[ 0.314057] ACPI: Using IOAPIC for interrupt routing
226[ 0.314091] HEST: Table parsing has been initialized.
227[ 0.314098] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
228[ 0.320123] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
229[ 0.320140] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
230[ 0.320292] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
231[ 0.320810] PCI host bridge to bus 0000:00
232[ 0.320818] pci_bus 0000:00: root bus resource [bus 00-ff]
233[ 0.320823] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
234[ 0.320827] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
235[ 0.320832] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
236[ 0.320836] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
237[ 0.320852] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
238[ 0.321061] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
239[ 0.321081] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
240[ 0.321092] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
241[ 0.321103] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
242[ 0.321177] pci 0000:00:01.0: supports D1 D2
243[ 0.321265] pci 0000:00:01.0: System wakeup disabled by ACPI
244[ 0.321404] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
245[ 0.321510] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
246[ 0.321602] pci 0000:00:04.0: System wakeup disabled by ACPI
247[ 0.321713] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
248[ 0.321740] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
249[ 0.321754] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
250[ 0.321767] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
251[ 0.321781] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
252[ 0.321794] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
253[ 0.321807] pci 0000:00:11.0: reg 0x24: [mem 0xf0246000-0xf02463ff]
254[ 0.322028] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
255[ 0.322048] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff]
256[ 0.322201] pci 0000:00:12.0: System wakeup disabled by ACPI
257[ 0.322344] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
258[ 0.322370] pci 0000:00:12.2: reg 0x10: [mem 0xf0247000-0xf02470ff]
259[ 0.322477] pci 0000:00:12.2: supports D1 D2
260[ 0.322481] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
261[ 0.322568] pci 0000:00:12.2: System wakeup disabled by ACPI
262[ 0.322660] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
263[ 0.322680] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff]
264[ 0.322829] pci 0000:00:13.0: System wakeup disabled by ACPI
265[ 0.322937] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
266[ 0.322963] pci 0000:00:13.2: reg 0x10: [mem 0xf0248000-0xf02480ff]
267[ 0.323070] pci 0000:00:13.2: supports D1 D2
268[ 0.323074] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
269[ 0.323160] pci 0000:00:13.2: System wakeup disabled by ACPI
270[ 0.323267] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
271[ 0.323500] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
272[ 0.323529] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
273[ 0.323616] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
274[ 0.323788] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
275[ 0.324023] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
276[ 0.324152] pci 0000:00:14.4: System wakeup disabled by ACPI
277[ 0.324258] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
278[ 0.324437] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
279[ 0.324613] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
280[ 0.324791] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
281[ 0.324985] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
282[ 0.325158] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
283[ 0.325331] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
284[ 0.325516] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
285[ 0.325825] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
286[ 0.325849] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
287[ 0.325880] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
288[ 0.325901] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
289[ 0.325915] pci 0000:01:00.0: reg 0x30: [mem 0xf0100000-0xf011ffff pref]
290[ 0.326011] pci 0000:01:00.0: supports D1 D2
291[ 0.326015] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
292[ 0.333746] pci 0000:00:04.0: PCI bridge to [bus 01]
293[ 0.333772] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
294[ 0.333779] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
295[ 0.333788] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
296[ 0.333978] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
297[ 0.333992] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
298[ 0.333997] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
299[ 0.334001] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
300[ 0.334006] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
301[ 0.334859] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15)
302[ 0.334992] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15)
303[ 0.335106] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15)
304[ 0.335203] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15)
305[ 0.335300] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15)
306[ 0.335397] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11
307[ 0.335489] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15)
308[ 0.335589] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15)
309[ 0.335798] ACPI: Enabled 6 GPEs in block 00 to 1F
310[ 0.336227] vgaarb: setting as boot device: PCI:0000:00:01.0
311[ 0.336237] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
312[ 0.336249] vgaarb: loaded
313[ 0.336253] vgaarb: bridge control possible 0000:00:01.0
314[ 0.336862] SCSI subsystem initialized
315[ 0.337069] libata version 3.00 loaded.
316[ 0.337163] ACPI: bus type USB registered
317[ 0.337213] usbcore: registered new interface driver usbfs
318[ 0.337238] usbcore: registered new interface driver hub
319[ 0.337272] usbcore: registered new device driver usb
320[ 0.337646] PCI: Using ACPI for IRQ routing
321[ 0.337653] PCI: pci_cache_line_size set to 64 bytes
322[ 0.337729] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
323[ 0.337734] e820: reserve RAM buffer [mem 0xc7c54000-0xc7ffffff]
324[ 0.337738] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
325[ 0.338009] NetLabel: Initializing
326[ 0.338012] NetLabel: domain hash size = 128
327[ 0.338015] NetLabel: protocols = UNLABELED CIPSOv4
328[ 0.338042] NetLabel: unlabeled traffic allowed by default
329[ 0.338338] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
330[ 0.338351] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
331[ 0.340465] Switched to clocksource hpet
332[ 0.355039] AppArmor: AppArmor Filesystem Enabled
333[ 0.355212] pnp: PnP ACPI init
334[ 0.355609] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
335[ 0.355839] pnp: PnP ACPI: found 1 devices
336[ 0.371446] pci 0000:00:04.0: PCI bridge to [bus 01]
337[ 0.371458] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
338[ 0.371467] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
339[ 0.371474] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
340[ 0.371483] pci 0000:00:14.4: PCI bridge to [bus 02]
341[ 0.371502] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
342[ 0.371507] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
343[ 0.371511] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
344[ 0.371515] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
345[ 0.371520] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
346[ 0.371524] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
347[ 0.371528] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
348[ 0.371533] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
349[ 0.371537] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
350[ 0.371541] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
351[ 0.371545] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
352[ 0.371607] NET: Registered protocol family 2
353[ 0.372053] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
354[ 0.372283] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
355[ 0.372654] TCP: Hash tables configured (established 32768 bind 32768)
356[ 0.372766] TCP: reno registered
357[ 0.372793] UDP hash table entries: 2048 (order: 4, 65536 bytes)
358[ 0.372853] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
359[ 0.373037] NET: Registered protocol family 1
360[ 0.373078] pci 0000:00:01.0: Video device with shadowed ROM
361[ 0.430494] PCI: CLS 64 bytes, default 64
362[ 0.430638] Trying to unpack rootfs image as initramfs...
363[ 8.912227] Freeing initrd memory: 21872K (ffff88007eaa3000 - ffff88007ffff000)
364[ 8.912250] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
365[ 8.912256] software IO TLB [mem 0xc3c54000-0xc7c54000] (64MB) mapped at [ffff8800c3c54000-ffff8800c7c53fff]
366[ 8.912792] microcode: CPU0: patch_level=0x05000029
367[ 8.912809] microcode: CPU1: patch_level=0x05000029
368[ 8.913073] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
369[ 8.913096] LVT offset 0 assigned for vector 0x400
370[ 8.913129] perf: AMD IBS detected (0x000000ff)
371[ 8.913228] Scanning for low memory corruption every 60 seconds
372[ 8.914121] futex hash table entries: 512 (order: 3, 32768 bytes)
373[ 8.914151] Initialise system trusted keyring
374[ 8.914198] audit: initializing netlink subsys (disabled)
375[ 8.914242] audit: type=2000 audit(1455766373.720:1): initialized
376[ 8.915263] HugeTLB registered 2 MB page size, pre-allocated 0 pages
377[ 8.918925] zpool: loaded
378[ 8.918932] zbud: loaded
379[ 8.919564] VFS: Disk quotas dquot_6.5.2
380[ 8.919685] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
381[ 8.921381] fuse init (API version 7.23)
382[ 8.922043] Key type big_key registered
383[ 8.924281] Key type asymmetric registered
384[ 8.924293] Asymmetric key parser 'x509' registered
385[ 8.924429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
386[ 8.924577] io scheduler noop registered
387[ 8.924586] io scheduler deadline registered (default)
388[ 8.924663] io scheduler cfq registered
389[ 8.925274] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
390[ 8.925280] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
391[ 8.925288] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
392[ 8.925303] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
393[ 8.925340] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
394[ 8.925573] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
395[ 8.925582] ACPI: Power Button [PWRB]
396[ 8.925670] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
397[ 8.925675] ACPI: Power Button [PWRF]
398[ 8.925886] ACPI: acpi_idle registered with cpuidle
399[ 8.926990] thermal LNXTHERM:00: registered as thermal_zone0
400[ 8.926998] ACPI: Thermal Zone [TZ00] (47 C)
401[ 8.927113] GHES: Failed to enable APEI firmware first mode.
402[ 8.927538] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
403[ 8.948169] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
404[ 8.968796] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
405[ 8.989415] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
406[ 9.010045] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
407[ 9.016335] Linux agpgart interface v0.103
408[ 9.023653] brd: module loaded
409[ 9.027906] loop: module loaded
410[ 9.028541] libphy: Fixed MDIO Bus: probed
411[ 9.028549] tun: Universal TUN/TAP device driver, 1.6
412[ 9.028553] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
413[ 9.028871] PPP generic driver version 2.4.2
414[ 9.029274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
415[ 9.029302] ehci-pci: EHCI PCI platform driver
416[ 9.029641] QUIRK: Enable AMD PLL fix
417[ 9.029681] ehci-pci 0000:00:12.2: EHCI Host Controller
418[ 9.029696] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
419[ 9.029708] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
420[ 9.029736] ehci-pci 0000:00:12.2: debug port 1
421[ 9.029806] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0247000
422[ 9.040726] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
423[ 9.040882] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
424[ 9.040887] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
425[ 9.040891] usb usb1: Product: EHCI Host Controller
426[ 9.040896] usb usb1: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
427[ 9.040899] usb usb1: SerialNumber: 0000:00:12.2
428[ 9.041442] hub 1-0:1.0: USB hub found
429[ 9.041465] hub 1-0:1.0: 5 ports detected
430[ 9.042103] ehci-pci 0000:00:13.2: EHCI Host Controller
431[ 9.042118] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
432[ 9.042127] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
433[ 9.042142] ehci-pci 0000:00:13.2: debug port 1
434[ 9.042195] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0248000
435[ 9.052726] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
436[ 9.052879] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
437[ 9.052884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
438[ 9.052889] usb usb2: Product: EHCI Host Controller
439[ 9.052893] usb usb2: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
440[ 9.052897] usb usb2: SerialNumber: 0000:00:13.2
441[ 9.053430] hub 2-0:1.0: USB hub found
442[ 9.053454] hub 2-0:1.0: 5 ports detected
443[ 9.053837] ehci-platform: EHCI generic platform driver
444[ 9.053869] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
445[ 9.053891] ohci-pci: OHCI PCI platform driver
446[ 9.054212] ohci-pci 0000:00:12.0: OHCI PCI host controller
447[ 9.054226] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
448[ 9.054284] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000
449[ 9.112859] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
450[ 9.112869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
451[ 9.112873] usb usb3: Product: OHCI PCI host controller
452[ 9.112877] usb usb3: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
453[ 9.112881] usb usb3: SerialNumber: 0000:00:12.0
454[ 9.113422] hub 3-0:1.0: USB hub found
455[ 9.113491] hub 3-0:1.0: 5 ports detected
456[ 9.114099] ohci-pci 0000:00:13.0: OHCI PCI host controller
457[ 9.114116] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
458[ 9.114170] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000
459[ 9.172847] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
460[ 9.172857] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
461[ 9.172861] usb usb4: Product: OHCI PCI host controller
462[ 9.172866] usb usb4: Manufacturer: Linux 3.19.0-25-generic ohci_hcd
463[ 9.172869] usb usb4: SerialNumber: 0000:00:13.0
464[ 9.173413] hub 4-0:1.0: USB hub found
465[ 9.173483] hub 4-0:1.0: 5 ports detected
466[ 9.173813] ohci-platform: OHCI generic platform driver
467[ 9.173845] uhci_hcd: USB Universal Host Controller Interface driver
468[ 9.173981] i8042: PNP: No PS/2 controller found. Probing ports directly.
469[ 9.174515] serio: i8042 KBD port at 0x60,0x64 irq 1
470[ 9.174525] serio: i8042 AUX port at 0x60,0x64 irq 12
471[ 9.175205] mousedev: PS/2 mouse device common for all mice
472[ 9.176231] rtc_cmos 00:00: RTC can wake from S4
473[ 9.176624] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
474[ 9.176685] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
475[ 9.176759] i2c /dev entries driver
476[ 9.176923] device-mapper: uevent: version 1.0.3
477[ 9.177227] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
478[ 9.177271] ledtrig-cpu: registered to indicate activity on CPUs
479[ 9.178555] PCCT header not found.
480[ 9.178566] ACPI PCC probe failed.
481[ 9.178854] TCP: cubic registered
482[ 9.179132] NET: Registered protocol family 10
483[ 9.179914] NET: Registered protocol family 17
484[ 9.179950] Key type dns_resolver registered
485[ 9.181354] Loading compiled-in X.509 certificates
486[ 9.183718] Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
487[ 9.183766] registered taskstats version 1
488[ 9.190390] Key type trusted registered
489[ 9.202557] Key type encrypted registered
490[ 9.202584] AppArmor: AppArmor sha1 policy hashing enabled
491[ 9.202593] ima: No TPM chip found, activating TPM-bypass!
492[ 9.202657] evm: HMAC attrs: 0x1
493[ 9.203360] Magic number: 4:121:513
494[ 9.203594] rtc_cmos 00:00: setting system clock to 2016-02-18 03:32:54 UTC (1455766374)
495[ 9.203891] acpi-cpufreq: overriding BIOS provided _PSD data
496[ 9.204106] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
497[ 9.204109] EDD information not available.
498[ 9.204224] PM: Hibernation image not present or could not be loaded.
499[ 9.205479] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
500[ 9.205489] Write protecting the kernel read-only data: 12288k
501[ 9.206120] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
502[ 9.206524] Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
503[ 9.249533] systemd-udevd[104]: starting version 204
504[ 9.290633] ahci 0000:00:11.0: version 3.0
505[ 9.291072] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
506[ 9.291080] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
507[ 9.300591] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
508[ 9.301281] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc900007ca000, 00:03:2d:19:6d:e5, XID 081000c0 IRQ 25
509[ 9.301288] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
510[ 9.306757] scsi host0: ahci
511[ 9.307358] scsi host1: ahci
512[ 9.307649] scsi host2: ahci
513[ 9.308205] scsi host3: ahci
514[ 9.311609] [drm] Initialized drm 1.1.0 20060810
515[ 9.312025] scsi host4: ahci
516[ 9.321479] scsi host5: ahci
517[ 9.321701] ata1: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246100 irq 19
518[ 9.321707] ata2: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246180 irq 19
519[ 9.321713] ata3: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246200 irq 19
520[ 9.321719] ata4: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246280 irq 19
521[ 9.321724] ata5: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246300 irq 19
522[ 9.321729] ata6: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246380 irq 19
523[ 9.375654] [drm] radeon kernel modesetting enabled.
524[ 9.381129] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
525[ 9.381137] AMD IOMMUv2 functionality not available on this system
526[ 9.386815] CRAT table not found
527[ 9.386824] Finished initializing topology ret=0
528[ 9.387349] kfd kfd: Initialized module
529[ 9.388454] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
530[ 9.388564] [drm] register mmio base: 0xF0200000
531[ 9.388567] [drm] register mmio size: 262144
532[ 9.388666] ATOM BIOS: AMD
533[ 9.388757] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
534[ 9.388763] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
535[ 9.388767] [drm] Detected VRAM RAM=384M, BAR=256M
536[ 9.388770] [drm] RAM width 32bits DDR
537[ 9.391264] [TTM] Zone kernel: Available graphics memory: 1820160 kiB
538[ 9.391273] [TTM] Initializing pool allocator
539[ 9.391286] [TTM] Initializing DMA pool allocator
540[ 9.391340] [drm] radeon: 384M of VRAM memory ready
541[ 9.391343] [drm] radeon: 1024M of GTT memory ready.
542[ 9.391377] [drm] Loading PALM Microcode
543[ 9.391500] [drm] Internal thermal controller without fan control
544[ 9.391604] [drm] Found smc ucode version: 0x00010601
545[ 9.391691] [drm] radeon: dpm initialized
546[ 9.392007] [drm] GART: num cpu pages 262144, num gpu pages 262144
547[ 9.425048] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
548[ 9.425278] radeon 0000:00:01.0: WB enabled
549[ 9.425287] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800c3aabc00
550[ 9.425292] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800c3aabc0c
551[ 9.426080] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900008b2118
552[ 9.426086] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
553[ 9.426088] [drm] Driver supports precise vblank timestamp query.
554[ 9.426092] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
555[ 9.426157] radeon 0000:00:01.0: radeon: using MSI.
556[ 9.426241] [drm] radeon: irq initialized.
557[ 9.462765] [drm] ring test on 0 succeeded in 1 usecs
558[ 9.462782] [drm] ring test on 3 succeeded in 3 usecs
559[ 9.513216] [drm] ring test on 5 succeeded in 1 usecs
560[ 9.533181] [drm] UVD initialized successfully.
561[ 9.534018] [drm] ib test on ring 0 succeeded in 0 usecs
562[ 9.534068] [drm] ib test on ring 3 succeeded in 0 usecs
563[ 9.616767] usb 3-1: new full-speed USB device number 2 using ohci-pci
564[ 9.632777] usb 1-2: new high-speed USB device number 3 using ehci-pci
565[ 9.640613] ata1: SATA link down (SStatus 0 SControl 300)
566[ 9.672748] ata3: SATA link down (SStatus 0 SControl 300)
567[ 9.676748] ata2: SATA link down (SStatus 0 SControl 300)
568[ 9.680754] ata4: SATA link down (SStatus 0 SControl 300)
569[ 9.684749] ata5: SATA link down (SStatus 0 SControl 300)
570[ 9.692742] ata6: SATA link down (SStatus 0 SControl 300)
571[ 9.767890] usb 1-2: New USB device found, idVendor=154b, idProduct=005b
572[ 9.767906] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
573[ 9.767915] usb 1-2: Product: USB 2.0 FD
574[ 9.767923] usb 1-2: Manufacturer: PNY Technologies
575[ 9.767931] usb 1-2: SerialNumber: AD16HD1200001552
576[ 9.784855] usb 3-1: New USB device found, idVendor=04b3, idProduct=3016
577[ 9.784866] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
578[ 9.784871] usb 3-1: Product: USB 1.1 2 port downstream low-power hub
579[ 9.784875] usb 3-1: Manufacturer: Lite-On Tech
580[ 9.787048] hub 3-1:1.0: USB hub found
581[ 9.788890] hub 3-1:1.0: 4 ports detected
582[ 9.905318] usb-storage 1-2:1.0: USB Mass Storage device detected
583[ 9.905587] scsi host6: usb-storage 1-2:1.0
584[ 9.905778] usbcore: registered new interface driver usb-storage
585[ 9.908608] tsc: Refined TSC clocksource calibration: 1600.003 MHz
586[ 9.909387] usbcore: registered new interface driver uas
587[ 10.052852] [drm] ib test on ring 5 succeeded
588[ 10.076382] [drm] Radeon Display Connectors
589[ 10.076391] [drm] Connector 0:
590[ 10.076394] [drm] DP-1
591[ 10.076396] [drm] HPD2
592[ 10.076401] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
593[ 10.076403] [drm] Encoders:
594[ 10.076406] [drm] DFP1: INTERNAL_UNIPHY
595[ 10.076409] [drm] Connector 1:
596[ 10.076411] [drm] VGA-1
597[ 10.076414] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
598[ 10.076416] [drm] Encoders:
599[ 10.076418] [drm] CRT1: INTERNAL_KLDSCP_DAC1
600[ 10.081705] usb 3-1.3: new low-speed USB device number 3 using ohci-pci
601[ 10.120653] [drm] fb mappable at 0xE0478000
602[ 10.120661] [drm] vram apper at 0xE0000000
603[ 10.120664] [drm] size 5242880
604[ 10.120666] [drm] fb depth is 24
605[ 10.120669] [drm] pitch is 5120
606[ 10.121082] fbcon: radeondrmfb (fb0) is primary device
607[ 10.162139] Console: switching to colour frame buffer device 160x64
608[ 10.170493] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
609[ 10.170497] radeon 0000:00:01.0: registered panic notifier
610[ 10.176857] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
611[ 10.211708] usb 3-1.3: New USB device found, idVendor=04b3, idProduct=3019
612[ 10.211720] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
613[ 10.211726] usb 3-1.3: Product: IBM USB Travel Keyboard with UltraNav
614[ 10.211730] usb 3-1.3: Manufacturer: Lite-On Tech
615[ 10.223879] hidraw: raw HID events driver (C) Jiri Kosina
616[ 10.244270] usbcore: registered new interface driver usbhid
617[ 10.244280] usbhid: USB HID core driver
618[ 10.248802] input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:04B3:3019.0001/input/input6
619[ 10.304903] hid-generic 0003:04B3:3019.0001: input,hidraw0: USB HID v1.00 Keyboard [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:12.0-1.3/input0
620[ 10.307892] input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:04B3:3019.0002/input/input7
621[ 10.361590] hid-generic 0003:04B3:3019.0002: input,hidraw1: USB HID v1.00 Device [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:12.0-1.3/input1
622[ 10.425686] usb 3-1.4: new low-speed USB device number 4 using ohci-pci
623[ 10.542683] usb 3-1.4: New USB device found, idVendor=06cb, idProduct=0009
624[ 10.542695] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
625[ 10.542700] usb 3-1.4: Product: Composite TouchPad / TrackPoint
626[ 10.542704] usb 3-1.4: Manufacturer: Synaptics Inc.
627[ 10.908704] Switched to clocksource tsc
628[ 11.133473] scsi 6:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
629[ 11.135553] sd 6:0:0:0: Attached scsi generic sg0 type 0
630[ 11.137941] sd 6:0:0:0: [sda] 15814656 512-byte logical blocks: (8.09 GB/7.54 GiB)
631[ 11.138934] sd 6:0:0:0: [sda] Write Protect is off
632[ 11.138949] sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
633[ 11.139936] sd 6:0:0:0: [sda] No Caching mode page found
634[ 11.140022] sd 6:0:0:0: [sda] Assuming drive cache: write through
635[ 11.145261] sda: sda1
636[ 11.149330] sd 6:0:0:0: [sda] Attached SCSI removable disk
637[ 13.401638] random: nonblocking pool is initialized
638[ 13.798890] squashfs: version 4.0 (2009/01/31) Phillip Lougher
639[ 31.124825] systemd-udevd[998]: starting version 204
640[ 31.630220] lp: driver loaded but no devices found
641[ 31.670768] ppdev: user-space parallel port driver
642[ 31.977098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
643[ 32.110402] Bluetooth: Core ver 2.20
644[ 32.110451] NET: Registered protocol family 31
645[ 32.110455] Bluetooth: HCI device and connection manager initialized
646[ 32.110466] Bluetooth: HCI socket layer initialized
647[ 32.110474] Bluetooth: L2CAP socket layer initialized
648[ 32.110490] Bluetooth: SCO socket layer initialized
649[ 32.163436] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
650[ 32.163446] Bluetooth: BNEP filters: protocol multicast
651[ 32.163457] Bluetooth: BNEP socket layer initialized
652[ 32.212345] Bluetooth: RFCOMM TTY layer initialized
653[ 32.212386] Bluetooth: RFCOMM socket layer initialized
654[ 32.212408] Bluetooth: RFCOMM ver 1.11
655[ 32.220481] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
656[ 32.225198] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
657[ 32.906737] init: cups main process (1103) killed by HUP signal
658[ 32.906769] init: cups main process ended, respawning
659[ 32.946038] kvm: Nested Virtualization enabled
660[ 32.946057] kvm: Nested Paging enabled
661[ 32.958403] input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input8
662[ 33.030881] systemd-udevd[1031]: Error calling EVIOCSKEYCODE: Invalid argument
663[ 33.030907] systemd-udevd[1031]: Error calling EVIOCSKEYCODE: Invalid argument
664[ 33.030919] systemd-udevd[1031]: Error calling EVIOCSKEYCODE: Invalid argument
665[ 33.030931] systemd-udevd[1031]: Error calling EVIOCSKEYCODE: Invalid argument
666[ 33.030942] systemd-udevd[1031]: Error calling EVIOCSKEYCODE: Invalid argument
667[ 33.030953] systemd-udevd[1031]: Error calling EVIOCSKEYCODE: Invalid argument
668[ 33.030965] systemd-udevd[1031]: Error calling EVIOCSKEYCODE: Invalid argument
669[ 33.083243] input: Synaptics Inc. Composite TouchPad / TrackPoint (Stick) as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.4/3-1.4:1.1/input/input9
670[ 33.094721] usbcore: registered new interface driver synaptics_usb
671[ 33.193508] device-mapper: multipath: version 1.7.0 loaded
672[ 34.040715] init: failsafe main process (1226) killed by TERM signal
673[ 34.079430] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
674[ 34.079442] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
675[ 34.079448] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
676[ 34.079452] sound hdaudioC0D0: mono: mono_out=0x0
677[ 34.079456] sound hdaudioC0D0: inputs:
678[ 34.079461] sound hdaudioC0D0: Mic=0x18
679[ 34.079465] sound hdaudioC0D0: Line=0x1a
680[ 34.119199] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
681[ 34.120220] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
682[ 34.120673] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
683[ 36.629916] r8169 0000:01:00.0 eth0: link down
684[ 36.629946] r8169 0000:01:00.0 eth0: link down
685[ 36.633813] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
686[ 36.700927] init: alsa-restore main process (1632) terminated with status 99
687[ 39.606962] init: plymouth-upstart-bridge main process ended, respawning
688[ 39.622162] init: plymouth-upstart-bridge main process (1970) terminated with status 1
689[ 39.622198] init: plymouth-upstart-bridge main process ended, respawning
690[ 39.868383] r8169 0000:01:00.0 eth0: link up
691[ 39.868412] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready