Gitiles
Code Review Sign In
review.coreboot.org / board-status / 7f6db60d40cdb040f38f3ffb3de6c37f6a6b1db9 / . / amd / persimmon / 02201a2-dirty / 2013-11-12T02:23:41Z / kernel_log.txt
blob: fb4890455818698ec52e9095f0c8af1d04b89049 [file] [log] [blame]
David Hendricks4db02b92013-11-11 18:23:42 -0800[diff] [blame]1[ 0.491385] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
2[ 0.496997] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
3[ 0.502620] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
4[ 0.503171] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
5[ 0.503195] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
6[ 0.503205] pci 0000:00:01.0: reg 14: [io 0x2000-0x20ff]
7[ 0.503215] pci 0000:00:01.0: reg 18: [mem 0xf0200000-0xf023ffff]
8[ 0.503286] pci 0000:00:01.0: supports D1 D2
9[ 0.503412] pci 0000:00:01.0: System wakeup disabled by ACPI
10[ 0.508205] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
11[ 0.508284] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
12[ 0.508380] pci 0000:00:04.0: System wakeup disabled by ACPI
13[ 0.513293] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
14[ 0.513328] pci 0000:00:11.0: reg 10: [io 0x2410-0x2417]
15[ 0.513341] pci 0000:00:11.0: reg 14: [io 0x2420-0x2423]
16[ 0.513354] pci 0000:00:11.0: reg 18: [io 0x2418-0x241f]
17[ 0.513367] pci 0000:00:11.0: reg 1c: [io 0x2424-0x2427]
18[ 0.513379] pci 0000:00:11.0: reg 20: [io 0x2400-0x240f]
19[ 0.513392] pci 0000:00:11.0: reg 24: [mem 0xf0246000-0xf02463ff]
20[ 0.514034] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
21[ 0.514064] pci 0000:00:12.0: reg 10: [mem 0xf0244000-0xf0244fff]
22[ 0.514265] pci 0000:00:12.0: System wakeup disabled by ACPI
23[ 0.519223] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
24[ 0.519258] pci 0000:00:12.2: reg 10: [mem 0xf0246400-0xf02464ff]
25[ 0.519367] pci 0000:00:12.2: supports D1 D2
26[ 0.519371] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
27[ 0.519502] pci 0000:00:12.2: System wakeup disabled by ACPI
28[ 0.524341] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
29[ 0.524369] pci 0000:00:13.0: reg 10: [mem 0xf0245000-0xf0245fff]
30[ 0.524564] pci 0000:00:13.0: System wakeup disabled by ACPI
31[ 0.529446] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
32[ 0.529471] pci 0000:00:13.2: reg 10: [mem 0xf0246500-0xf02465ff]
33[ 0.529572] pci 0000:00:13.2: supports D1 D2
34[ 0.529576] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
35[ 0.529670] pci 0000:00:13.2: System wakeup disabled by ACPI
36[ 0.534506] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
37[ 0.535145] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
38[ 0.535182] pci 0000:00:14.2: reg 10: [mem 0xf0240000-0xf0243fff 64bit]
39[ 0.535273] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
40[ 0.535831] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
41[ 0.536499] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
42[ 0.536684] pci 0000:00:14.4: System wakeup disabled by ACPI
43[ 0.541550] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
44[ 0.542131] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
45[ 0.542702] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
46[ 0.543287] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
47[ 0.543873] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
48[ 0.544453] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
49[ 0.544987] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
50[ 0.545501] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
51[ 0.546227] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
52[ 0.546256] pci 0000:01:00.0: reg 10: [io 0x1000-0x10ff]
53[ 0.546289] pci 0000:01:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
54[ 0.546310] pci 0000:01:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
55[ 0.546324] pci 0000:01:00.0: reg 30: [mem 0xf0100000-0xf011ffff pref]
56[ 0.546402] pci 0000:01:00.0: supports D1 D2
57[ 0.546406] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
58[ 0.566344] pci 0000:00:04.0: PCI bridge to [bus 01]
59[ 0.570106] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
60[ 0.570112] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
61[ 0.570121] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
62[ 0.570595] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
63[ 0.576212] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
64[ 0.576216] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
65[ 0.576221] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
66[ 0.576225] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
67[ 0.576246] pci_bus 0000:00: on NUMA node 0
68[ 0.576372] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
69[ 0.581222] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
70[ 0.586244] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
71[ 0.593386] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
72[ 0.600506] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
73[ 0.607637] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
74[ 0.614775] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
75[ 0.621906] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
76[ 0.627167] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
77[ 0.634287] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
78[ 0.641981] ACPI: Enabled 6 GPEs in block 00 to 1F
79[ 0.645627] acpi root: \_SB_.PCI0 notify handler is installed
80[ 0.645707] Found 1 acpi root devices
81[ 0.647006] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
82[ 0.653891] vgaarb: loaded
83[ 0.655334] vgaarb: bridge control possible 0000:00:01.0
84[ 0.660390] SCSI subsystem initialized
85[ 0.664607] PCI: Using ACPI for IRQ routing
86[ 0.667562] PCI: pci_cache_line_size set to 64 bytes
87[ 0.667647] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
88[ 0.667652] e820: reserve RAM buffer [mem 0x6614d000-0x67ffffff]
89[ 0.668774] Switching to clocksource hpet
90[ 0.691454] pnp: PnP ACPI init
91[ 0.693321] ACPI: bus type PNP registered
92[ 0.696671] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
93[ 0.697154] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
94[ 0.697227] pnp 00:02: [dma 4]
95[ 0.697679] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
96[ 0.698218] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
97[ 0.698537] pnp: PnP ACPI: found 4 devices
98[ 0.701376] ACPI: bus type PNP unregistered
99[ 0.709420] pci 0000:00:04.0: PCI bridge to [bus 01]
100[ 0.713227] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
101[ 0.718060] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
102[ 0.723603] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
103[ 0.730084] pci 0000:00:14.4: PCI bridge to [bus 02]
104[ 0.734053] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
105[ 0.734058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
106[ 0.734062] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
107[ 0.734066] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
108[ 0.734070] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
109[ 0.734073] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
110[ 0.734077] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
111[ 0.734082] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
112[ 0.734085] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
113[ 0.734089] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
114[ 0.734092] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff]
115[ 0.734247] NET: Registered protocol family 2
116[ 0.737766] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
117[ 0.743904] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
118[ 0.749404] TCP: Hash tables configured (established 16384 bind 16384)
119[ 0.754851] TCP: reno registered
120[ 0.756842] UDP hash table entries: 1024 (order: 3, 32768 bytes)
121[ 0.761633] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
122[ 0.767161] NET: Registered protocol family 1
123[ 0.770288] pci 0000:00:01.0: Boot video device
124[ 0.823112] PCI: CLS 64 bytes, default 64
125[ 0.823207] Trying to unpack rootfs image as initramfs...
126[ 1.595379] Freeing initrd memory: 3352k freed
127[ 1.601140] LVT offset 0 assigned for vector 0x400
128[ 1.604790] perf: AMD IBS detected (0x000000ff)
129[ 1.610217] audit: initializing netlink socket (disabled)
130[ 1.614405] type=2000 audit(1384202887.500:1): initialized
131[ 1.621152] VFS: Disk quotas dquot_6.5.2
132[ 1.623982] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
133[ 1.629639] squashfs: version 4.0 (2009/01/31) Phillip Lougher
134[ 1.634318] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
135[ 1.643170] OCFS2 1.5.0
136[ 1.644617] ocfs2: Registered cluster interface o2cb
137[ 1.648326] OCFS2 DLMFS 1.5.0
138[ 1.650246] OCFS2 User DLM kernel interface loaded
139[ 1.653819] OCFS2 Node Manager 1.5.0
140[ 1.659468] OCFS2 DLM 1.5.0
141[ 1.661862] GFS2 installed
142[ 1.663336] msgmni has been set to 3195
143[ 1.667431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
144[ 1.673605] io scheduler noop registered
145[ 1.676262] io scheduler deadline registered
146[ 1.679342] io scheduler cfq registered (default)
147[ 1.683139] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
148[ 1.684064] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
149[ 1.689784] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
150[ 1.695080] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
151[ 1.696086] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
152[ 1.722352] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
153[ 1.748332] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
154[ 1.774231] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
155[ 1.800226] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
156[ 1.805856] Linux agpgart interface v0.103
157[ 1.819909] brd: module loaded
158[ 1.827845] loop: module loaded
159[ 1.831753] i8042: PNP: No PS/2 controller found. Probing ports directly.
160[ 1.838086] serio: i8042 KBD port at 0x60,0x64 irq 1
161[ 1.841836] serio: i8042 AUX port at 0x60,0x64 irq 12
162[ 1.846765] mousedev: PS/2 mouse device common for all mice
163[ 1.852159] cpuidle: using governor ladder
164[ 1.855004] cpuidle: using governor menu
165[ 1.858334] hidraw: raw HID events driver (C) Jiri Kosina
166[ 1.864847] TCP: cubic registered
167[ 1.866925] NET: Registered protocol family 17
168[ 1.872708] registered taskstats version 1
169[ 1.876012] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
170[ 1.881423] Freeing unused kernel memory: 800k freed
171[ 2.272872] ACPI: bus type ATA registered
172[ 2.273897] libata version 3.00 loaded.
173[ 2.601669] tsc: Refined TSC clocksource calibration: 1599.999 MHz
174[ 2.601681] Switching to clocksource tsc
175[ 5.102917] ahci 0000:00:11.0: version 3.0
176[ 5.103395] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
177[ 5.103402] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
178[ 5.108327] scsi0 : ahci
179[ 5.109056] scsi1 : ahci
180[ 5.109551] scsi2 : ahci
181[ 5.110073] scsi3 : ahci
182[ 5.110560] scsi4 : ahci
183[ 5.111129] scsi5 : ahci
184[ 5.111903] ata1: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246100 irq 19
185[ 5.111917] ata2: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246180 irq 19
186[ 5.111921] ata3: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246200 irq 19
187[ 5.111925] ata4: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246280 irq 19
188[ 5.111929] ata5: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246300 irq 19
189[ 5.111933] ata6: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246380 irq 19
190[ 5.461925] ata3: SATA link down (SStatus 0 SControl 300)
191[ 5.461986] ata6: SATA link down (SStatus 0 SControl 300)
192[ 5.462042] ata2: SATA link down (SStatus 0 SControl 300)
193[ 5.462085] ata1: SATA link down (SStatus 0 SControl 300)
194[ 5.462148] ata5: SATA link down (SStatus 0 SControl 300)
195[ 5.661941] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
196[ 5.662733] ata4.00: ATA-7: Kingston SSDNow V Series 64GB, B090522a, max UDMA/133
197[ 5.662741] ata4.00: 125045424 sectors, multi 1: LBA
198[ 5.663842] ata4.00: configured for UDMA/133
199[ 5.664297] scsi 3:0:0:0: Direct-Access ATA Kingston SSDNow B090 PQ: 0 ANSI: 5
200[ 5.665662] sd 3:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
201[ 5.665755] sd 3:0:0:0: [sda] Write Protect is off
202[ 5.665760] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
203[ 5.665799] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
204[ 5.667259] sda: sda1
205[ 5.668680] sd 3:0:0:0: [sda] Attached SCSI disk
206[ 6.183672] sd 3:0:0:0: Attached scsi generic sg0 type 0
207[ 6.874940] scsi: <fdomain> Detection failed (no card)
208[ 7.015327] GDT-HA: Storage RAID Controller Driver. Version: 3.05
209[ 7.389426] imm: Version 2.05 (for Linux 2.4.0)
210[ 7.976953] Fusion MPT base driver 3.04.20
211[ 7.976958] Copyright (c) 1999-2008 LSI Corporation
212[ 8.198468] Fusion MPT SPI Host driver 3.04.20
213[ 8.350438] Fusion MPT FC Host driver 3.04.20
214[ 8.484890] Fusion MPT SAS Host driver 3.04.20
215[ 8.594967] 3ware Storage Controller device driver for Linux v1.26.02.003.
216[ 8.706409] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
217[ 8.819583] Compaq SMART2 Driver (v 2.6.0)
218[ 8.964866] HP CISS Driver (v 3.6.26)
219[ 9.316087] Adaptec aacraid driver 1.2-0[30200]-ms
220[ 9.566651] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
221[ 9.571045] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
222[ 9.811268] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
223[ 9.946577] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k.
224[ 10.098755] Emulex LightPulse Fibre Channel SCSI driver 8.3.39
225[ 10.098761] Copyright(c) 2004-2009 Emulex. All rights reserved.
226[ 10.384311] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
227[ 10.577563] ACPI: bus type USB registered
228[ 10.578009] usbcore: registered new interface driver usbfs
229[ 10.578239] usbcore: registered new interface driver hub
230[ 10.578902] usbcore: registered new device driver usb
231[ 10.584849] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
232[ 10.591585] ehci-pci: EHCI PCI platform driver
233[ 10.592103] ehci-pci 0000:00:12.2: EHCI Host Controller
234[ 10.592120] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
235[ 10.592133] QUIRK: Enable AMD PLL fix
236[ 10.592137] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
237[ 10.592166] ehci-pci 0000:00:12.2: debug port 1
238[ 10.592235] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0246400
239[ 10.611934] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
240[ 10.611996] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
241[ 10.612002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
242[ 10.612005] usb usb1: Product: EHCI Host Controller
243[ 10.612009] usb usb1: Manufacturer: Linux 3.10.17-gentoo ehci_hcd
244[ 10.612012] usb usb1: SerialNumber: 0000:00:12.2
245[ 10.612977] hub 1-0:1.0: USB hub found
246[ 10.612989] hub 1-0:1.0: 5 ports detected
247[ 10.613599] ehci-pci 0000:00:13.2: EHCI Host Controller
248[ 10.613613] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
249[ 10.613621] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
250[ 10.613638] ehci-pci 0000:00:13.2: debug port 1
251[ 10.613692] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0246500
252[ 10.631880] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
253[ 10.631942] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
254[ 10.631947] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
255[ 10.631951] usb usb2: Product: EHCI Host Controller
256[ 10.631955] usb usb2: Manufacturer: Linux 3.10.17-gentoo ehci_hcd
257[ 10.631958] usb usb2: SerialNumber: 0000:00:13.2
258[ 10.633084] hub 2-0:1.0: USB hub found
259[ 10.633096] hub 2-0:1.0: 5 ports detected
260[ 10.925505] usbcore: registered new interface driver usb-storage
261[ 11.066807] uhci_hcd: USB Universal Host Controller Interface driver
262[ 11.209185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
263[ 11.209879] ohci_hcd 0000:00:12.0: OHCI Host Controller
264[ 11.209894] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
265[ 11.209951] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0244000
266[ 11.265968] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
267[ 11.265976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
268[ 11.265980] usb usb3: Product: OHCI Host Controller
269[ 11.265984] usb usb3: Manufacturer: Linux 3.10.17-gentoo ohci_hcd
270[ 11.265987] usb usb3: SerialNumber: 0000:00:12.0
271[ 11.267024] hub 3-0:1.0: USB hub found
272[ 11.267053] hub 3-0:1.0: 5 ports detected
273[ 11.267627] ohci_hcd 0000:00:13.0: OHCI Host Controller
274[ 11.267640] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
275[ 11.267674] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0245000
276[ 11.325926] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
277[ 11.325934] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
278[ 11.325938] usb usb4: Product: OHCI Host Controller
279[ 11.325942] usb usb4: Manufacturer: Linux 3.10.17-gentoo ohci_hcd
280[ 11.325945] usb usb4: SerialNumber: 0000:00:13.0
281[ 11.327016] hub 4-0:1.0: USB hub found
282[ 11.327046] hub 4-0:1.0: 5 ports detected
283[ 11.591386] usbcore: registered new interface driver usbhid
284[ 11.591391] usbhid: USB HID core driver
285[ 11.631683] usb 3-2: new low-speed USB device number 2 using ohci_hcd
286[ 11.850013] usb 3-2: New USB device found, idVendor=045e, idProduct=00dd
287[ 11.850022] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
288[ 11.850026] usb 3-2: Product: Comfort Curve Keyboard 2000
289[ 11.850030] usb 3-2: Manufacturer: Microsoft
290[ 11.863051] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input0
291[ 11.863879] hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:12.0-2/input0
292[ 11.878499] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input1
293[ 11.879785] hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:12.0-2/input1
294[ 12.804380] device-mapper: uevent: version 1.0.3
295[ 12.804677] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
296[ 13.942284] md: raid0 personality registered for level 0
297[ 14.097369] md: raid1 personality registered for level 1
298[ 14.293331] async_tx: api initialized (async)
299[ 14.471650] raid6: sse2x1 1251 MB/s
300[ 14.641641] raid6: sse2x2 1586 MB/s
301[ 14.811634] raid6: sse2x4 2267 MB/s
302[ 14.811636] raid6: using algorithm sse2x4 (2267 MB/s)
303[ 14.811638] raid6: using ssse3x2 recovery algorithm
304[ 14.887292] xor: measuring software checksum speed
305[ 14.981595] prefetch64-sse: 3469.200 MB/sec
306[ 15.081591] generic_sse: 3239.200 MB/sec
307[ 15.081593] xor: using function: prefetch64-sse (3469.200 MB/sec)
308[ 15.108065] md: raid6 personality registered for level 6
309[ 15.108071] md: raid5 personality registered for level 5
310[ 15.108073] md: raid4 personality registered for level 4
311[ 15.280733] md: raid10 personality registered for level 10
312[ 15.445013] md: linear personality registered for level -1
313[ 15.609492] md: multipath personality registered for level -4
314[ 15.801740] JFS: nTxBlock = 8192, nTxLock = 65536
315[ 16.012813] RPC: Registered named UNIX socket transport module.
316[ 16.012820] RPC: Registered udp transport module.
317[ 16.012821] RPC: Registered tcp transport module.
318[ 16.012823] RPC: Registered tcp NFSv4.1 backchannel transport module.
319[ 16.211191] fuse init (API version 7.22)
320[ 16.385311] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
321[ 16.385317] e1000: Copyright (c) 1999-2006 Intel Corporation.
322[ 16.591130] pps_core: LinuxPPS API ver. 1 registered
323[ 16.591136] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
324[ 16.595514] PTP clock support registered
325[ 16.800567] Loading iSCSI transport class v2.0-870.
326[ 17.956961] kjournald starting. Commit interval 5 seconds
327[ 17.957066] EXT3-fs (sda1): mounted filesystem with ordered data mode
328[ 18.628435] systemd-udevd[15649]: starting version 204
329[ 18.786963] rtc_cmos 00:00: RTC can wake from S4
330[ 18.787191] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
331[ 18.787243] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
332[ 18.803518] ACPI: acpi_idle registered with cpuidle
333[ 18.813476] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
334[ 18.813614] ACPI: Power Button [PWRB]
335[ 18.813735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
336[ 18.813794] ACPI: Power Button [PWRF]
337[ 18.835444] [drm] Initialized drm 1.1.0 20060810
338[ 18.839508] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMB0 1 (20130328/utaddress-251)
339[ 18.839523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
340[ 18.840708] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
341[ 18.841027] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
342[ 18.841270] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc90001204000, 00:03:2d:18:60:ab, XID 081000c0 IRQ 41
343[ 18.841275] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
344[ 18.842327] input: PC Speaker as /devices/platform/pcspkr/input/input4
345[ 18.868488] kvm: Nested Virtualization enabled
346[ 18.868497] kvm: Nested Paging enabled
347[ 18.891405] acpi-cpufreq: overriding BIOS provided _PSD data
348[ 18.895322] [drm] radeon kernel modesetting enabled.
349[ 18.895908] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
350[ 18.895945] [drm] register mmio base: 0xF0200000
351[ 18.895947] [drm] register mmio size: 262144
352[ 18.896048] ATOM BIOS: AMD
353[ 18.896115] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
354[ 18.896120] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
355[ 18.896440] [drm] Detected VRAM RAM=384M, BAR=256M
356[ 18.896447] [drm] RAM width 32bits DDR
357[ 18.896699] [TTM] Zone kernel: Available graphics memory: 818376 kiB
358[ 18.896704] [TTM] Initializing pool allocator
359[ 18.896714] [TTM] Initializing DMA pool allocator
360[ 18.896776] [drm] radeon: 384M of VRAM memory ready
361[ 18.896779] [drm] radeon: 512M of GTT memory ready.
362[ 18.951737] radeon 0000:00:01.0: radeon_uvd: Can't load firmware "radeon/SUMO_uvd.bin"
363[ 18.951869] [drm] GART: num cpu pages 131072, num gpu pages 131072
364[ 18.968371] [drm] Loading PALM Microcode
365[ 18.970153] r600_cp: Failed to load firmware "radeon/PALM_pfp.bin"
366[ 18.970162] [drm:evergreen_startup] *ERROR* Failed to load firmware!
367[ 18.970168] radeon 0000:00:01.0: disabling GPU acceleration
368[ 18.971200] radeon 0000:00:01.0: ffff88005f2ce800 unpin not necessary
369[ 18.971205] radeon 0000:00:01.0: ffff88005f2ce800 unpin not necessary
370[ 18.972120] [drm] Radeon Display Connectors
371[ 18.972122] [drm] Connector 0:
372[ 18.972124] [drm] DP-1
373[ 18.972125] [drm] HPD2
374[ 18.972128] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
375[ 18.972130] [drm] Encoders:
376[ 18.972132] [drm] DFP1: INTERNAL_UNIPHY
377[ 18.972133] [drm] Connector 1:
378[ 18.972135] [drm] VGA-1
379[ 18.972138] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
380[ 18.972139] [drm] Encoders:
381[ 18.972141] [drm] CRT1: INTERNAL_KLDSCP_DAC1
382[ 18.972177] [drm] Internal thermal controller without fan control
383[ 18.972242] [drm] radeon: power management initialized
384[ 18.981456] systemd-udevd[15665]: renamed network interface eth0 to enp1s0
385[ 19.031651] [drm] fb mappable at 0xE0040000
386[ 19.031657] [drm] vram apper at 0xE0000000
387[ 19.031658] [drm] size 7680000
388[ 19.031660] [drm] fb depth is 24
389[ 19.031661] [drm] pitch is 6400
390[ 19.031957] fbcon: radeondrmfb (fb0) is primary device
391[ 19.100821] Console: switching to colour frame buffer device 200x75
392[ 19.113320] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
393[ 19.113324] radeon 0000:00:01.0: registered panic notifier
394[ 19.113356] [drm] Initialized radeon 2.33.0 20080528 for 0000:00:01.0 on minor 0
395[ 20.242488] EXT3-fs (sda1): using internal journal
396[ 21.467428] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
397[ 21.493164] r8169 0000:01:00.0 enp1s0: link down
398[ 21.493222] r8169 0000:01:00.0 enp1s0: link down
399[ 22.728868] NET: Registered protocol family 10
400[ 22.729278] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
401[ 23.865761] r8169 0000:01:00.0 enp1s0: link up
402[ 23.865784] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
403[ 2861.108161] i2c /dev entries driver