blob: 311ae22c9170962e6b1196b1adb3c092caa3d90d [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standdb345a72015-10-01 08:08:00 +00001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-656-gbd0dab2-dirty 10/01/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [ttyS0] enabled
182[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
183[ 0.000000] hpet clockevent registered
184[ 0.000000] tsc: Fast TSC calibration using PIT
185[ 0.000000] tsc: Detected 1909.847 MHz processor
186[ 0.000159] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.69 BogoMIPS (lpj=7639388)
187[ 0.010795] pid_max: default: 32768 minimum: 301
188[ 0.015450] ACPI: Core revision 20140424
189[ 0.021801] ACPI: All ACPI Tables successfully acquired
190[ 0.027163] Security Framework initialized
191[ 0.031289] AppArmor: AppArmor disabled by boot time parameter
192[ 0.037124] Yama: disabled by default; enable with sysctl kernel.yama.*
193[ 0.044869] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
194[ 0.058103] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
195[ 0.067872] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
196[ 0.074773] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.082625] Initializing cgroup subsys memory
198[ 0.087002] Initializing cgroup subsys devices
199[ 0.091464] Initializing cgroup subsys freezer
200[ 0.095927] Initializing cgroup subsys net_cls
201[ 0.100384] Initializing cgroup subsys blkio
202[ 0.104671] Initializing cgroup subsys perf_event
203[ 0.109381] Initializing cgroup subsys net_prio
204[ 0.113961] tseg: 0000000000
205[ 0.113974] CPU: Physical Processor ID: 0
206[ 0.117993] CPU: Processor Core ID: 0
207[ 0.121665] mce: CPU supports 6 MCE banks
208[ 0.125693] LVT offset 0 assigned for vector 0xf9
209[ 0.130422] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
210Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
211tlb_flushall_shift: 6
212[ 0.145762] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
213[ 0.154766] ftrace: allocating 21601 entries in 85 pages
214[ 0.170145] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
215[ 0.215666] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
216[ 0.332510] Performance Events: AMD PMU driver.
217[ 0.337080] ... version: 0
218[ 0.341093] ... bit width: 48
219[ 0.345192] ... generic registers: 4
220[ 0.349212] ... value mask: 0000ffffffffffff
221[ 0.354513] ... max period: 00007fffffffffff
222[ 0.359832] ... fixed-purpose events: 0
223[ 0.363862] ... event mask: 000000000000000f
224[ 0.371778] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
225[ 0.379978] x86: Booting SMP configuration:
226[ 0.384174] .... node #0, CPUs: #1 #2 #3
227[ 0.428521] .... node #1, CPUs: #4 #5 #6 #7
228[ 0.581161] x86: Booted up 2 nodes, 8 CPUs
229[ 0.585465] smpboot: Total of 8 processors activated (30557.98 BogoMIPS)
230[ 0.598034] devtmpfs: initialized
231[ 0.609948] pinctrl core: initialized pinctrl subsystem
232[ 0.615343] NET: Registered protocol family 16
233[ 0.620001] cpuidle: using governor ladder
234[ 0.624106] cpuidle: using governor menu
235[ 0.628042] node 0 link 1: io port [1000, 3fff]
236[ 0.628045] TOM: 00000000c0000000 aka 3072M
237[ 0.632238] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
238[ 0.632242] node 0 link 1: mmio [fc000000, fc3fffff]
239[ 0.632246] node 0 link 1: mmio [f8000000, fbffffff]
240[ 0.632248] TOM2: 0000000180000000 aka 6144M
241[ 0.636527] bus: [bus 00-05] on node 0 link 1
242[ 0.636529] bus: 00 [io 0x0000-0xffff]
243[ 0.636531] bus: 00 [mem 0xd0000000-0xffffffff]
244[ 0.636532] bus: 00 [mem 0x180000000-0xfcffffffff]
245[ 0.636639] ACPI: bus type PCI registered
246[ 0.640660] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
247[ 0.647257] PCI: Using configuration type 1 for base access
248[ 0.652830] PCI: Using configuration type 1 for extended access
249[ 0.659365] mtrr: your CPUs had inconsistent variable MTRR settings
250[ 0.665636] mtrr: probably your BIOS does not setup all CPUs.
251[ 0.671389] mtrr: corrected configuration.
252[ 0.685350] ACPI: Added _OSI(Module Device)
253[ 0.689542] ACPI: Added _OSI(Processor Device)
254[ 0.693993] ACPI: Added _OSI(3.0 _SCP Extensions)
255[ 0.698706] ACPI: Added _OSI(Processor Aggregator Device)
256[ 0.707651] ACPI: Interpreter enabled
257[ 0.711333] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
258[ 0.720608] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
259[ 0.729869] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
260[ 0.739143] ACPI: (supports S0 S1 S5)
261[ 0.742813] ACPI: Using IOAPIC for interrupt routing
262[ 0.747829] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
263[ 0.776550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
264[ 0.782740] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
265[ 0.790951] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
266[ 0.830540] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
267[ 0.840561] PCI host bridge to bus 0000:00
268[ 0.844665] pci_bus 0000:00: root bus resource [bus 00-05]
269[ 0.850155] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
270[ 0.856341] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
271[ 0.863219] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.870091] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.876969] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.883159] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.883358] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.883365] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.883506] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.883521] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.883539] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.883549] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.883591] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.883690] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.883702] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.883728] pci 0000:00:02.0: supports D1 D2
285[ 0.883747] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.883817] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.889537] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.889552] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.889605] pci 0000:00:02.1: supports D1 D2
290[ 0.889612] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.889673] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.895403] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.895438] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.895458] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.902597] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.909129] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.916267] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.922903] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.922913] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.922918] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.922923] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.922927] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.922932] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.922937] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.923079] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.923086] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.923099] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.923118] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.923132] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.923147] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.923170] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.923294] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.923416] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.929144] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.929193] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.929242] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.934964] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.935017] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.935106] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.940825] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.940875] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.940931] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.946647] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.946696] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.946760] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.952490] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.952626] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.952767] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.952888] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.953021] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.953135] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.953288] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.953410] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.953539] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.953681] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.953887] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.953907] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.953917] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.953924] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.953962] pci 0000:01:04.0: supports D1 D2
341[ 0.954043] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.959025] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.959029] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.959032] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.959150] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.959189] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.959232] pci 0000:02:00.0: reg 0x30: [mem 0x21400000-0x2140ffff pref]
348[ 0.959311] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.959413] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.969417] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.974386] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.974482] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.974514] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.974617] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.974717] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.984716] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.989687] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.989762] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.994813] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 0.999817] pci_bus 0000:00: on NUMA node 0
361[ 0.999918] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.006090] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.012224] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.019521] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.026824] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.034141] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.041451] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.047591] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.053731] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.061027] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.068324] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.075671] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.081822] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.088008] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.095332] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.102638] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.109944] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.118463] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.124931] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.131395] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.137869] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.144590] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.149710] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.155375] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.163463] vgaarb: loaded
386[ 1.166179] vgaarb: bridge control possible 0000:01:04.0
387[ 1.171655] PCI: Using ACPI for IRQ routing
388[ 1.175852] PCI: pci_cache_line_size set to 64 bytes
389[ 1.175909] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.175913] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.176233] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.183285] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.188347] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.197005] Switched to clocksource hpet
395[ 1.212574] pnp: PnP ACPI init
396[ 1.215686] ACPI: bus type PNP registered
397[ 1.220250] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.220330] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.220429] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.220508] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.220547] pnp 00:04: [dma 2]
402[ 1.220590] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.220612] pnp: PnP ACPI: found 5 devices
404[ 1.224716] ACPI: bus type PNP unregistered
405[ 1.236734] pci 0000:02:00.0: can't claim BAR 6 [mem 0x21400000-0x2140ffff pref]: no compatible bridge window
406[ 1.246683] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.251660] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.257761] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.264549] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.271783] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.279010] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.283988] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.290787] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.295757] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.302553] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.307524] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.312505] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.312508] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
419[ 1.312510] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
420[ 1.312513] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
421[ 1.312516] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
422[ 1.312519] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
423[ 1.312521] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
424[ 1.312524] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
425[ 1.312527] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
426[ 1.312530] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
427[ 1.312657] NET: Registered protocol family 2
428[ 1.317526] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
429[ 1.325223] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
430[ 1.332553] TCP: Hash tables configured (established 65536 bind 65536)
431[ 1.339160] TCP: reno registered
432[ 1.342426] UDP hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.348651] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.355433] NET: Registered protocol family 1
435[ 1.360184] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
436[ 1.366269] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
437[ 1.372173] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.377708] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.383213] pci 0000:00:0b.0: Found disabled HT MSI Mapping
440[ 1.388797] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.394337] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.399841] pci 0000:00:0c.0: Found disabled HT MSI Mapping
443[ 1.405427] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.410983] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.416494] pci 0000:00:0d.0: Found disabled HT MSI Mapping
446[ 1.422078] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.427628] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.433136] pci 0000:00:0e.0: Found disabled HT MSI Mapping
449[ 1.438726] pci 0000:00:00.0: Found enabled HT MSI Mapping
450[ 1.444248] pci 0000:01:04.0: Video device with shadowed ROM
451[ 1.444257] PCI: CLS 64 bytes, default 64
452[ 1.444365] Unpacking initramfs...
453[ 1.677252] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
454[ 1.685120] PCI-DMA: Disabling AGP.
455[ 1.690194] PCI-DMA: aperture base @ b4000000 size 65536 KB
456[ 1.695779] PCI-DMA: using GART IOMMU.
457[ 1.699537] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
458[ 1.711555] platform rtc_cmos: registered platform RTC device (no PNP device found)
459[ 1.719740] microcode: CPU0: patch_level=0x01000096
460[ 1.724629] microcode: CPU1: patch_level=0x01000096
461[ 1.729522] microcode: CPU2: patch_level=0x01000096
462[ 1.734424] microcode: CPU3: patch_level=0x01000096
463[ 1.739329] microcode: CPU4: patch_level=0x01000096
464[ 1.744220] microcode: CPU5: patch_level=0x01000096
465[ 1.749114] microcode: CPU6: patch_level=0x01000096
466[ 1.754010] microcode: CPU7: patch_level=0x01000096
467[ 1.758996] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
468[ 1.767796] LVT offset 1 assigned for vector 0x400
469[ 1.772610] IBS: LVT offset 1 assigned
470[ 1.776402] perf: AMD IBS detected (0x00000007)
471[ 1.781549] futex hash table entries: 2048 (order: 5, 131072 bytes)
472[ 1.787930] audit: initializing netlink subsys (disabled)
473[ 1.793362] audit: type=2000 audit(1443686065.524:1): initialized
474[ 1.800233] HugeTLB registered 2 MB page size, pre-allocated 0 pages
475[ 1.806636] zbud: loaded
476[ 1.809523] VFS: Disk quotas dquot_6.5.2
477[ 1.813492] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
478[ 1.820032] msgmni has been set to 9945
479[ 1.824417] alg: No test for stdrng (krng)
480[ 1.828581] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
481[ 1.836076] io scheduler noop registered
482[ 1.840013] io scheduler deadline registered
483[ 1.844381] io scheduler cfq registered (default)
484[ 1.849304] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
485[ 1.849427] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
486[ 1.849540] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
487[ 1.849649] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
488[ 1.849809] aer 0000:00:0b.0:pcie02: service driver aer loaded
489[ 1.849838] aer 0000:00:0c.0:pcie02: service driver aer loaded
490[ 1.849863] aer 0000:00:0d.0:pcie02: service driver aer loaded
491[ 1.849890] aer 0000:00:0e.0:pcie02: service driver aer loaded
492[ 1.849909] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
493[ 1.856883] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
494[ 1.863419] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
495[ 1.863429] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
496[ 1.870391] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
497[ 1.876923] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
498[ 1.876934] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
499[ 1.883898] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
500[ 1.883908] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
501[ 1.890872] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
502[ 1.890900] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
503[ 1.896506] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
504[ 1.903246] GHES: HEST is not enabled!
505[ 1.907133] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
506[ 1.933722] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
507[ 1.961406] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
508[ 1.969341] Linux agpgart interface v0.103
509[ 1.973650] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
510[ 1.983997] serio: i8042 KBD port at 0x60,0x64 irq 1
511[ 1.988988] serio: i8042 AUX port at 0x60,0x64 irq 12
512[ 1.994274] mousedev: PS/2 mouse device common for all mice
513[ 1.999947] rtc_cmos rtc_cmos: RTC can wake from S4
514[ 2.005073] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
515[ 2.011476] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
516[ 2.019404] ledtrig-cpu: registered to indicate activity on CPUs
517[ 2.025600] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
518[ 2.032049] AMD IOMMUv2 functionality not available on this system
519[ 2.038416] TCP: cubic registered
520[ 2.041874] NET: Registered protocol family 10
521[ 2.046699] mip6: Mobile IPv6
522[ 2.048234] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.058285] NET: Registered protocol family 17
524[ 2.062738] mpls_gso: MPLS GSO support
525[ 2.067341] registered taskstats version 1
526[ 2.072198] rtc_cmos rtc_cmos: setting system clock to 2015-10-01 07:54:27 UTC (1443686067)
527[ 2.080612] PM: Hibernation image not present or could not be loaded.
528[ 2.082422] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
529[ 2.090279] Write protecting the kernel read-only data: 8192k
530[ 2.099501] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
531[ 2.108094] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
532[ 2.131996] systemd-udevd[99]: starting version 215
533[ 2.137789] random: systemd-udevd urandom read with 3 bits of entropy available
534[ 2.169097] pps_core: LinuxPPS API ver. 1 registered
535[ 2.174082] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.183620] ACPI: bus type USB registered
537[ 2.187848] usbcore: registered new interface driver usbfs
538[ 2.187900] PTP clock support registered
539[ 2.197373] usbcore: registered new interface driver hub
540[ 2.202936] usbcore: registered new device driver usb
541[ 2.203022] tg3.c:v3.137 (May 11, 2014)
542[ 2.203036] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.203242] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
544[ 2.224209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
545[ 2.231309] ehci-pci: EHCI PCI platform driver
546[ 2.236073] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
547[ 2.236097] ehci-pci 0000:00:02.1: EHCI Host Controller
548[ 2.236115] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
549[ 2.236136] ehci-pci 0000:00:02.1: debug port 1
550[ 2.236182] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
551[ 2.236213] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
552[ 2.244703] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
553[ 2.244765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
554[ 2.244767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
555[ 2.244769] usb usb1: Product: EHCI Host Controller
556[ 2.244770] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
557[ 2.244771] usb usb1: SerialNumber: 0000:00:02.1
558[ 2.244993] hub 1-0:1.0: USB hub found
559[ 2.245001] hub 1-0:1.0: 10 ports detected
560[ 2.308958] ohci-pci: OHCI PCI platform driver
561[ 2.313640] ohci-pci 0000:00:02.0: OHCI PCI host controller
562[ 2.319245] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
563[ 2.326693] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
564[ 2.343876] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
565[ 2.354140] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
566[ 2.363874] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
567[ 2.371706] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
568[ 2.378508] tg3 0000:03:00.0: enabling device (0004 -> 0006)
569[ 2.384310] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
570[ 2.386670] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
571[ 2.386672] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
572[ 2.386673] usb usb2: Product: OHCI PCI host controller
573[ 2.386674] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
574[ 2.386676] usb usb2: SerialNumber: 0000:00:02.0
575[ 2.386885] hub 2-0:1.0: USB hub found
576[ 2.386893] hub 2-0:1.0: 10 ports detected
577[ 2.473050] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
578[ 2.483314] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
579[ 2.493049] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
580[ 2.500882] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
581[ 2.514038] FS-Cache: Loaded
582[ 2.521160] RPC: Registered named UNIX socket transport module.
583[ 2.527802] RPC: Registered udp transport module.
584[ 2.533891] RPC: Registered tcp transport module.
585[ 2.539981] RPC: Registered tcp NFSv4.1 backchannel transport module.
586[ 2.552317] FS-Cache: Netfs 'nfs' registered for caching
587[ 2.566017] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
588[ 2.612653] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
589[ 2.708503] tsc: Refined TSC clocksource calibration: 1909.786 MHz
590[ 3.712249] Switched to clocksource tsc
591[ 4.207505] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
592[ 4.214031] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
593[ 4.220918] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
594[ 19.663611] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
595[ 19.677316] systemd[1]: Detected architecture 'x86-64'.
596[ 22.203132] random: nonblocking pool is initialized
597[ 25.779240] systemd[1]: Inserted module 'autofs4'
598[ 25.975382] systemd[1]: Set hostname to <cb-test-tgt>.
599[ 54.936752] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
600[ 54.949468] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
601[ 54.964846] systemd[1]: Expecting device dev-ttyS0.device...
602[ 54.978530] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
603[ 54.986319] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
604[ 54.993921] systemd[1]: Starting Remote File Systems (Pre).
605[ 55.010452] systemd[1]: Reached target Remote File Systems (Pre).
606[ 55.016577] systemd[1]: Starting Encrypted Volumes.
607[ 55.030405] systemd[1]: Reached target Encrypted Volumes.
608[ 55.035842] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
609[ 55.043901] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
610[ 55.051836] systemd[1]: Starting Paths.
611[ 55.066501] systemd[1]: Reached target Paths.
612[ 55.070990] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
613[ 55.094408] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
614[ 55.103835] systemd[1]: Starting Swap.
615[ 55.118394] systemd[1]: Reached target Swap.
616[ 55.122688] systemd[1]: Starting Root Slice.
617[ 55.134382] systemd[1]: Created slice Root Slice.
618[ 55.139114] systemd[1]: Starting User and Session Slice.
619[ 55.154377] systemd[1]: Created slice User and Session Slice.
620[ 55.160146] systemd[1]: Starting Delayed Shutdown Socket.
621[ 55.174457] systemd[1]: Listening on Delayed Shutdown Socket.
622[ 55.180270] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
623[ 55.258331] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
624[ 55.265317] systemd[1]: Starting Journal Socket (/dev/log).
625[ 55.306314] systemd[1]: Listening on Journal Socket (/dev/log).
626[ 55.312276] systemd[1]: Starting udev Kernel Socket.
627[ 55.326329] systemd[1]: Listening on udev Kernel Socket.
628[ 55.331669] systemd[1]: Starting udev Control Socket.
629[ 55.346312] systemd[1]: Listening on udev Control Socket.
630[ 55.351740] systemd[1]: Starting Journal Socket.
631[ 55.366300] systemd[1]: Listening on Journal Socket.
632[ 55.371319] systemd[1]: Starting System Slice.
633[ 55.386292] systemd[1]: Created slice System Slice.
634[ 55.391201] systemd[1]: Starting system-getty.slice.
635[ 55.406286] systemd[1]: Created slice system-getty.slice.
636[ 55.411710] systemd[1]: Starting system-serial\x2dgetty.slice.
637[ 55.426304] systemd[1]: Created slice system-serial\x2dgetty.slice.
638[ 55.432613] systemd[1]: Starting Increase datagram queue length...
639[ 55.451550] systemd[1]: Mounting Debug File System...
640[ 55.467602] systemd[1]: Mounting POSIX Message Queue File System...
641[ 57.351709] systemd[1]: Starting Load Kernel Modules...
642[ 58.340937] systemd[1]: Started Set Up Additional Binary Formats.
643[ 58.769647] systemd[1]: Starting Create list of required static device nodes for the current kernel...
644[ 58.794802] systemd[1]: Starting udev Coldplug all Devices...
645[ 58.810403] systemd[1]: Mounting Huge Pages File System...
646[ 58.826249] systemd[1]: Starting Slices.
647[ 58.841167] systemd[1]: Reached target Slices.
648[ 58.845770] systemd[1]: Starting Remount Root and Kernel File Systems...
649[ 60.728537] systemd[1]: Started Create list of required static device nodes for the current kernel.
650[ 60.738277] systemd[1]: Starting Create Static Device Nodes in /dev...
651[ 61.064435] systemd[1]: Started Remount Root and Kernel File Systems.
652[ 61.493025] systemd[1]: Started Various fixups to make systemd work better on Debian.
653[ 61.500918] systemd[1]: Starting Load/Save Random Seed...
654[ 61.528177] systemd[1]: Mounted Huge Pages File System.
655[ 61.544156] systemd[1]: Mounted POSIX Message Queue File System.
656[ 61.560236] systemd[1]: Mounted Debug File System.
657[ 61.576215] systemd[1]: Started Increase datagram queue length.
658[ 61.609518] systemd[1]: Starting Syslog Socket.
659[ 61.624209] systemd[1]: Listening on Syslog Socket.
660[ 61.629348] systemd[1]: Starting Sockets.
661[ 61.644204] systemd[1]: Reached target Sockets.
662[ 61.648888] systemd[1]: Starting Journal Service...
663[ 61.676168] systemd[1]: Started Journal Service.
664[ 66.047912] systemd-journald[183]: Received request to flush runtime journal from PID 1
665[ 66.053122] systemd-udevd[189]: starting version 215
666[ 79.252476] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
667[ 79.260296] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
668[ 79.447480] EDAC MC: Ver: 3.0.0
669[ 80.243466] MCE: In-kernel MCE decoding enabled.
670[ 80.433545] FDC 0 is a post-1991 82077
671[ 80.625972] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
672[ 80.732198] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
673[ 80.740578] ACPI: Power Button [PWRB]
674[ 80.744346] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
675[ 80.751750] ACPI: Power Button [PWRF]
676[ 80.948245] SCSI subsystem initialized
677[ 81.028155] AMD64 EDAC driver v3.4.0
678[ 81.031830] EDAC amd64: DRAM ECC enabled.
679[ 81.035855] EDAC amd64: F10h detected (node 0).
680[ 81.040414] EDAC MC: DCT0 chip selects:
681[ 81.040416] EDAC amd64: MC: 0: 0MB 1: 0MB
682[ 81.045125] EDAC amd64: MC: 2: 0MB 3: 0MB
683[ 81.049839] EDAC amd64: MC: 4: 0MB 5: 0MB
684[ 81.054558] EDAC amd64: MC: 6: 1024MB 7: 1024MB
685[ 81.059273] EDAC MC: DCT1 chip selects:
686[ 81.059275] EDAC amd64: MC: 0: 0MB 1: 0MB
687[ 81.063987] EDAC amd64: MC: 2: 0MB 3: 0MB
688[ 81.068698] EDAC amd64: MC: 4: 0MB 5: 0MB
689[ 81.073414] EDAC amd64: MC: 6: 1024MB 7: 1024MB
690[ 81.078125] EDAC amd64: using x4 syndromes.
691[ 81.082319] EDAC amd64: MCT channel count: 2
692[ 81.086660] EDAC amd64: CS6: Registered DDR2 RAM
693[ 81.091295] EDAC amd64: CS7: Registered DDR2 RAM
694[ 81.096166] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
695[ 81.105893] EDAC amd64: DRAM ECC enabled.
696[ 81.109941] EDAC amd64: F10h detected (node 1).
697[ 81.114519] EDAC MC: DCT0 chip selects:
698[ 81.114521] EDAC amd64: MC: 0: 1024MB 1: 0MB
699[ 81.119236] EDAC amd64: MC: 2: 0MB 3: 0MB
700[ 81.123948] EDAC amd64: MC: 4: 0MB 5: 0MB
701[ 81.128661] EDAC amd64: MC: 6: 0MB 7: 0MB
702[ 81.133373] EDAC MC: DCT1 chip selects:
703[ 81.133375] EDAC amd64: MC: 0: 0MB 1: 0MB
704[ 81.138086] EDAC amd64: MC: 2: 0MB 3: 0MB
705[ 81.142799] EDAC amd64: MC: 4: 0MB 5: 0MB
706[ 81.147512] EDAC amd64: MC: 6: 0MB 7: 0MB
707[ 81.152224] EDAC amd64: using x4 syndromes.
708[ 81.156419] EDAC amd64: MCT channel count: 1
709[ 81.160739] EDAC amd64: CS0: Registered DDR2 RAM
710[ 81.165548] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
711[ 81.175305] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
712[ 81.467844] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
713[ 81.473039] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
714[ 81.713689] libata version 3.00 loaded.
715[ 81.835624] input: PC Speaker as /devices/platform/pcspkr/input/input4
716[ 81.936960] sata_nv 0000:00:07.0: version 3.5
717[ 81.937265] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
718[ 81.943567] scsi0 : sata_nv
719[ 81.946621] scsi1 : sata_nv
720[ 81.949497] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
721[ 81.956640] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
722[ 81.963968] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
723[ 81.970132] scsi2 : sata_nv
724[ 81.973081] scsi3 : sata_nv
725[ 81.975947] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
726[ 81.983138] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
727[ 81.990653] acpi-cpufreq: overriding BIOS provided _PSD data
728[ 82.027613] pata_amd 0000:00:06.0: version 0.4.1
729[ 82.028593] scsi4 : pata_amd
730[ 82.031906] scsi5 : pata_amd
731[ 82.034917] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
732[ 82.041888] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
733[ 82.272963] ata1: SATA link down (SStatus 0 SControl 300)
734[ 82.300953] ata3: SATA link down (SStatus 0 SControl 300)
735[ 82.588847] ata2: SATA link down (SStatus 0 SControl 300)
736[ 82.904730] ata4: SATA link down (SStatus 0 SControl 300)
737[ 83.643150] kvm: Nested Virtualization enabled
738[ 83.647653] kvm: Nested Paging enabled
739[ 124.883888] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
740[ 516.196375] nfs: server 10.100.1.1 not responding, still trying
741[ 516.202353] nfs: server 10.100.1.1 not responding, still trying
742[ 516.208305] nfs: server 10.100.1.1 not responding, still trying
743[ 516.236996] nfs: server 10.100.1.1 OK
744[ 516.327852] nfs: server 10.100.1.1 OK
745[ 516.356650] nfs: server 10.100.1.1 OK
746[ 520.175329] nfs: server 10.100.1.1 not responding, still trying
747[ 520.181269] nfs: server 10.100.1.1 not responding, still trying
748[ 520.187223] nfs: server 10.100.1.1 not responding, still trying
749[ 520.193180] nfs: server 10.100.1.1 not responding, still trying
750[ 520.199116] nfs: server 10.100.1.1 not responding, still trying
751[ 520.205049] nfs: server 10.100.1.1 not responding, still trying
752[ 520.210973] nfs: server 10.100.1.1 not responding, still trying
753[ 520.216919] nfs: server 10.100.1.1 not responding, still trying
754[ 520.363748] nfs: server 10.100.1.1 OK
755[ 520.399234] nfs: server 10.100.1.1 not responding, still trying
756[ 520.420740] nfs: server 10.100.1.1 OK
757[ 520.484131] nfs: server 10.100.1.1 OK
758[ 520.553007] nfs: server 10.100.1.1 OK
759[ 520.559166] nfs: server 10.100.1.1 not responding, still trying
760[ 520.565115] nfs: server 10.100.1.1 not responding, still trying
761[ 520.571063] nfs: server 10.100.1.1 not responding, still trying
762[ 520.577002] nfs: server 10.100.1.1 not responding, still trying
763[ 520.582942] nfs: server 10.100.1.1 not responding, still trying
764[ 520.588874] nfs: server 10.100.1.1 not responding, still trying
765[ 520.594810] nfs: server 10.100.1.1 not responding, still trying
766[ 520.600744] nfs: server 10.100.1.1 not responding, still trying
767[ 520.617686] nfs: server 10.100.1.1 OK
768[ 520.686088] nfs: server 10.100.1.1 OK
769[ 520.735204] nfs: server 10.100.1.1 OK
770[ 520.748452] nfs: server 10.100.1.1 OK
771[ 520.774510] nfs: server 10.100.1.1 OK
772[ 521.013372] nfs: server 10.100.1.1 OK
773[ 521.079024] nfs: server 10.100.1.1 OK
774[ 521.142972] nfs: server 10.100.1.1 OK
775[ 521.214626] nfs: server 10.100.1.1 OK
776[ 521.270311] nfs: server 10.100.1.1 OK
777[ 521.342196] nfs: server 10.100.1.1 OK
778[ 521.400539] nfs: server 10.100.1.1 OK
779[ 521.417166] nfs: server 10.100.1.1 OK