Gitiles
Code Review Sign In
review.coreboot.org / board-status / 71ea93fe7262f1a1b8ccf3a871f8bbf9ccca4860 / . / asus / kfsn4-dre / 4.1-455-g5fc6f90 / 2015-09-04T08:05:46Z / kernel_log.txt
blob: b362c61474ccd15f25ec3ab68f9d3b0de312d9d8 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand85a9b6f2015-09-04 09:45:44 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-455-g5fc6f90-dirty 09/04/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.792 MHz processor
187[ 0.000159] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.58 BogoMIPS (lpj=7639168)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015675] ACPI: Core revision 20140424
190[ 0.022079] ACPI: All ACPI Tables successfully acquired
191[ 0.027594] Security Framework initialized
192[ 0.031771] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037681] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045493] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058812] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068683] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075705] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083667] Initializing cgroup subsys memory
199[ 0.088132] Initializing cgroup subsys devices
200[ 0.092683] Initializing cgroup subsys freezer
201[ 0.097208] Initializing cgroup subsys net_cls
202[ 0.101753] Initializing cgroup subsys blkio
203[ 0.106108] Initializing cgroup subsys perf_event
204[ 0.110904] Initializing cgroup subsys net_prio
205[ 0.115562] tseg: 0000000000
206[ 0.115576] CPU: Physical Processor ID: 0
207[ 0.119695] CPU: Processor Core ID: 0
208[ 0.124496] mce: CPU supports 6 MCE banks
209[ 0.128609] LVT offset 0 assigned for vector 0xf9
210[ 0.133411] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148888] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158027] ftrace: allocating 21601 entries in 85 pages
215[ 0.173496] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219136] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336302] Performance Events: AMD PMU driver.
218[ 0.341013] ... version: 0
219[ 0.345103] ... bit width: 48
220[ 0.349297] ... generic registers: 4
221[ 0.353393] ... value mask: 0000ffffffffffff
222[ 0.358794] ... max period: 00007fffffffffff
223[ 0.364191] ... fixed-purpose events: 0
224[ 0.368285] ... event mask: 000000000000000f
225[ 0.376311] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384621] x86: Booting SMP configuration:
227[ 0.388891] .... node #0, CPUs: #1 #2 #3
228[ 0.433467] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585151] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589588] smpboot: Total of 8 processors activated (30557.57 BogoMIPS)
231[ 0.602218] devtmpfs: initialized
232[ 0.614246] pinctrl core: initialized pinctrl subsystem
233[ 0.619725] NET: Registered protocol family 16
234[ 0.624460] cpuidle: using governor ladder
235[ 0.628626] cpuidle: using governor menu
236[ 0.632632] node 0 link 1: io port [1000, 3fff]
237[ 0.632636] TOM: 00000000c0000000 aka 3072M
238[ 0.636898] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636902] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636905] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636907] TOM2: 0000000180000000 aka 6144M
242[ 0.641245] bus: [bus 00-05] on node 0 link 1
243[ 0.641247] bus: 00 [io 0x0000-0xffff]
244[ 0.641249] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641251] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641357] ACPI: bus type PCI registered
247[ 0.645441] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652110] PCI: Using configuration type 1 for base access
249[ 0.657753] PCI: Using configuration type 1 for extended access
250[ 0.664363] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670722] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676539] mtrr: corrected configuration.
253[ 0.693186] ACPI: Added _OSI(Module Device)
254[ 0.697482] ACPI: Added _OSI(Processor Device)
255[ 0.702005] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706787] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715810] ACPI: Interpreter enabled
258[ 0.719567] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738431] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747877] ACPI: (supports S0 S1 S5)
262[ 0.751631] ACPI: Using IOAPIC for interrupt routing
263[ 0.756712] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.784720] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.790985] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.799297] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.836908] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.847045] PCI host bridge to bus 0000:00
269[ 0.851237] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.856815] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.863091] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
272[ 0.870058] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
273[ 0.877013] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
274[ 0.883982] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
275[ 0.890271] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
276[ 0.890463] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
277[ 0.890471] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
278[ 0.890605] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
279[ 0.890613] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
280[ 0.890637] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
281[ 0.890641] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
282[ 0.890701] pci 0000:00:01.1: PME# supported from D3hot D3cold
283[ 0.890798] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
284[ 0.890809] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
285[ 0.890845] pci 0000:00:02.0: supports D1 D2
286[ 0.890855] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
287[ 0.890927] pci 0000:00:02.0: System wakeup disabled by ACPI
288[ 0.896742] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
289[ 0.896756] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
290[ 0.896797] pci 0000:00:02.1: supports D1 D2
291[ 0.896799] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
292[ 0.896846] pci 0000:00:02.1: System wakeup disabled by ACPI
293[ 0.902659] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
294[ 0.902685] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
295[ 0.902713] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
296[ 0.909931] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
297[ 0.916553] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
298[ 0.923780] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
299[ 0.930494] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
300[ 0.930502] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
301[ 0.930509] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
302[ 0.930514] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
303[ 0.930518] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
304[ 0.930523] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
305[ 0.930528] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
306[ 0.930678] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
307[ 0.930688] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
308[ 0.930693] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
309[ 0.930697] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
310[ 0.930702] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
311[ 0.930706] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
312[ 0.930711] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
313[ 0.930855] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
314[ 0.930961] pci 0000:00:09.0: System wakeup disabled by ACPI
315[ 0.936749] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
316[ 0.936798] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
317[ 0.936846] pci 0000:00:0b.0: System wakeup disabled by ACPI
318[ 0.942660] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
319[ 0.942715] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
320[ 0.942770] pci 0000:00:0c.0: System wakeup disabled by ACPI
321[ 0.948567] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
322[ 0.948607] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
323[ 0.948668] pci 0000:00:0d.0: System wakeup disabled by ACPI
324[ 0.954483] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
325[ 0.954524] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
326[ 0.954588] pci 0000:00:0e.0: System wakeup disabled by ACPI
327[ 0.960407] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
328[ 0.960567] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
329[ 0.960687] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
330[ 0.960795] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
331[ 0.960919] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
332[ 0.961023] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
333[ 0.961139] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
334[ 0.961275] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
335[ 0.961423] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
336[ 0.961566] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
337[ 0.961760] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
338[ 0.961785] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
339[ 0.961803] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
340[ 0.961820] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
341[ 0.961855] pci 0000:01:04.0: supports D1 D2
342[ 0.961945] pci 0000:00:09.0: PCI bridge to [bus 01]
343[ 0.967013] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
344[ 0.967016] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
345[ 0.967019] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
346[ 0.967138] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
347[ 0.967170] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
348[ 0.967206] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
349[ 0.967287] pci 0000:02:00.0: PME# supported from D3hot D3cold
350[ 0.967361] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
351[ 0.977487] pci 0000:00:0b.0: PCI bridge to [bus 02]
352[ 0.982542] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
353[ 0.982651] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
354[ 0.982683] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
355[ 0.982792] pci 0000:03:00.0: PME# supported from D3hot D3cold
356[ 0.982899] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
357[ 0.993011] pci 0000:00:0c.0: PCI bridge to [bus 03]
358[ 0.998069] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
359[ 0.998143] pci 0000:00:0d.0: PCI bridge to [bus 04]
360[ 1.003279] pci 0000:00:0e.0: PCI bridge to [bus 05]
361[ 1.008365] pci_bus 0000:00: on NUMA node 0
362[ 1.008465] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
363[ 1.014898] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
364[ 1.021310] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
365[ 1.028949] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
366[ 1.036597] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
367[ 1.044239] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
368[ 1.051901] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
369[ 1.058326] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
370[ 1.064745] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.072408] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
372[ 1.080061] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
373[ 1.087745] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
374[ 1.094154] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
375[ 1.100586] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
376[ 1.108238] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
377[ 1.115900] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
378[ 1.123560] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
379[ 1.132660] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
380[ 1.139365] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
381[ 1.146083] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
382[ 1.152794] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
383[ 1.159804] ACPI: Enabled 1 GPEs in block 00 to 1F
384[ 1.165047] vgaarb: setting as boot device: PCI:0000:01:04.0
385[ 1.170828] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
386[ 1.179020] vgaarb: loaded
387[ 1.181828] vgaarb: bridge control possible 0000:01:04.0
388[ 1.187387] PCI: Using ACPI for IRQ routing
389[ 1.191672] PCI: pci_cache_line_size set to 64 bytes
390[ 1.191729] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
391[ 1.191732] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
392[ 1.192047] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
393[ 1.199183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
394[ 1.204441] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
395[ 1.213191] Switched to clocksource hpet
396[ 1.228793] pnp: PnP ACPI init
397[ 1.232012] ACPI: bus type PNP registered
398[ 1.236644] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
399[ 1.236724] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
400[ 1.236822] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.236899] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
402[ 1.236940] pnp 00:04: [dma 2]
403[ 1.236982] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
404[ 1.237003] pnp: PnP ACPI: found 5 devices
405[ 1.241202] ACPI: bus type PNP unregistered
406[ 1.253298] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
407[ 1.263363] pci 0000:00:09.0: PCI bridge to [bus 01]
408[ 1.268402] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
409[ 1.274581] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
410[ 1.281453] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
411[ 1.288794] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
412[ 1.296157] pci 0000:00:0b.0: PCI bridge to [bus 02]
413[ 1.301206] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
414[ 1.308075] pci 0000:00:0c.0: PCI bridge to [bus 03]
415[ 1.313118] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
416[ 1.319996] pci 0000:00:0d.0: PCI bridge to [bus 04]
417[ 1.325034] pci 0000:00:0e.0: PCI bridge to [bus 05]
418[ 1.330086] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
419[ 1.330089] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
420[ 1.330092] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
421[ 1.330095] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
422[ 1.330098] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
423[ 1.330100] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
424[ 1.330103] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
425[ 1.330106] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
426[ 1.330108] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
427[ 1.330111] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
428[ 1.330245] NET: Registered protocol family 2
429[ 1.335211] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
430[ 1.343006] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
431[ 1.350415] TCP: Hash tables configured (established 65536 bind 65536)
432[ 1.357110] TCP: reno registered
433[ 1.360427] UDP hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.366704] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
435[ 1.373566] NET: Registered protocol family 1
436[ 1.378407] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
437[ 1.384570] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
438[ 1.390587] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.396195] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.401783] pci 0000:00:0b.0: Found disabled HT MSI Mapping
441[ 1.407468] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.413085] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.418675] pci 0000:00:0c.0: Found disabled HT MSI Mapping
444[ 1.424333] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.429938] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.435534] pci 0000:00:0d.0: Found disabled HT MSI Mapping
447[ 1.441192] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.446790] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.452385] pci 0000:00:0e.0: Found disabled HT MSI Mapping
450[ 1.458043] pci 0000:00:00.0: Found enabled HT MSI Mapping
451[ 1.463631] pci 0000:01:04.0: Video device with shadowed ROM
452[ 1.463639] PCI: CLS 64 bytes, default 64
453[ 1.463748] Unpacking initramfs...
454[ 1.696868] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
455[ 1.704815] PCI-DMA: Disabling AGP.
456[ 1.710029] PCI-DMA: aperture base @ b4000000 size 65536 KB
457[ 1.715720] PCI-DMA: using GART IOMMU.
458[ 1.719549] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
459[ 1.731656] platform rtc_cmos: registered platform RTC device (no PNP device found)
460[ 1.740011] microcode: CPU0: patch_level=0x01000096
461[ 1.745019] microcode: CPU1: patch_level=0x01000096
462[ 1.750031] microcode: CPU2: patch_level=0x01000096
463[ 1.755042] microcode: CPU3: patch_level=0x01000096
464[ 1.760056] microcode: CPU4: patch_level=0x01000096
465[ 1.765055] microcode: CPU5: patch_level=0x01000096
466[ 1.771175] microcode: CPU6: patch_level=0x01000096
467[ 1.776166] microcode: CPU7: patch_level=0x01000096
468[ 1.781246] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
469[ 1.790178] LVT offset 1 assigned for vector 0x400
470[ 1.795078] IBS: LVT offset 1 assigned
471[ 1.798942] perf: AMD IBS detected (0x00000007)
472[ 1.804169] futex hash table entries: 2048 (order: 5, 131072 bytes)
473[ 1.810642] audit: initializing netlink subsys (disabled)
474[ 1.816151] audit: type=2000 audit(1441359363.628:1): initialized
475[ 1.823106] HugeTLB registered 2 MB page size, pre-allocated 0 pages
476[ 1.829602] zbud: loaded
477[ 1.832571] VFS: Disk quotas dquot_6.5.2
478[ 1.836632] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
479[ 1.843280] msgmni has been set to 9945
480[ 1.847725] alg: No test for stdrng (krng)
481[ 1.852016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
482[ 1.859667] io scheduler noop registered
483[ 1.863683] io scheduler deadline registered
484[ 1.868120] io scheduler cfq registered (default)
485[ 1.873129] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
486[ 1.873256] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
487[ 1.873403] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
488[ 1.873528] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
489[ 1.873682] aer 0000:00:0b.0:pcie02: service driver aer loaded
490[ 1.873710] aer 0000:00:0c.0:pcie02: service driver aer loaded
491[ 1.873735] aer 0000:00:0d.0:pcie02: service driver aer loaded
492[ 1.873761] aer 0000:00:0e.0:pcie02: service driver aer loaded
493[ 1.873781] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
494[ 1.880884] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
495[ 1.887513] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
496[ 1.887523] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
497[ 1.894567] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
498[ 1.901178] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
499[ 1.901189] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
500[ 1.908231] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
501[ 1.908241] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
502[ 1.915293] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
503[ 1.915324] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
504[ 1.921012] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
505[ 1.927848] GHES: HEST is not enabled!
506[ 1.931810] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
507[ 1.958581] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
508[ 1.986374] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
509[ 1.994411] Linux agpgart interface v0.103
510[ 1.998823] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
511[ 2.009194] serio: i8042 KBD port at 0x60,0x64 irq 1
512[ 2.014295] serio: i8042 AUX port at 0x60,0x64 irq 12
513[ 2.019627] mousedev: PS/2 mouse device common for all mice
514[ 2.025430] rtc_cmos rtc_cmos: RTC can wake from S4
515[ 2.030650] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
516[ 2.037128] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
517[ 2.045110] ledtrig-cpu: registered to indicate activity on CPUs
518[ 2.051383] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
519[ 2.057915] AMD IOMMUv2 functionality not available on this system
520[ 2.064316] TCP: cubic registered
521[ 2.067860] NET: Registered protocol family 10
522[ 2.072806] mip6: Mobile IPv6
523[ 2.075866] NET: Registered protocol family 17
524[ 2.080487] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
525[ 2.089249] mpls_gso: MPLS GSO support
526[ 2.093972] registered taskstats version 1
527[ 2.098959] rtc_cmos rtc_cmos: setting system clock to 2015-09-04 09:36:05 UTC (1441359365)
528[ 2.107542] PM: Hibernation image not present or could not be loaded.
529[ 2.109375] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
530[ 2.117389] Write protecting the kernel read-only data: 8192k
531[ 2.126700] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
532[ 2.135448] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
533[ 2.159483] systemd-udevd[99]: starting version 215
534[ 2.165352] random: systemd-udevd urandom read with 3 bits of entropy available
535[ 2.196838] pps_core: LinuxPPS API ver. 1 registered
536[ 2.201933] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
537[ 2.211590] ACPI: bus type USB registered
538[ 2.215943] usbcore: registered new interface driver usbfs
539[ 2.215973] PTP clock support registered
540[ 2.225636] usbcore: registered new interface driver hub
541[ 2.231294] usbcore: registered new device driver usb
542[ 2.231382] tg3.c:v3.137 (May 11, 2014)
543[ 2.231394] tg3 0000:02:00.0: enabling device (0004 -> 0006)
544[ 2.231596] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.252929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
546[ 2.260151] ehci-pci: EHCI PCI platform driver
547[ 2.264979] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
548[ 2.265041] ehci-pci 0000:00:02.1: EHCI Host Controller
549[ 2.265058] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
550[ 2.265075] ehci-pci 0000:00:02.1: debug port 1
551[ 2.265122] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
552[ 2.265151] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
553[ 2.276884] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
554[ 2.276976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
555[ 2.276978] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
556[ 2.276980] usb usb1: Product: EHCI Host Controller
557[ 2.276981] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
558[ 2.276982] usb usb1: SerialNumber: 0000:00:02.1
559[ 2.277330] hub 1-0:1.0: USB hub found
560[ 2.277342] hub 1-0:1.0: 10 ports detected
561[ 2.339002] ohci-pci: OHCI PCI platform driver
562[ 2.343817] ohci-pci 0000:00:02.0: OHCI PCI host controller
563[ 2.349507] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
564[ 2.357064] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
565[ 2.372017] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
566[ 2.382457] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
567[ 2.392341] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
568[ 2.400277] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
569[ 2.407181] tg3 0000:03:00.0: enabling device (0004 -> 0006)
570[ 2.413106] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
571[ 2.421037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
572[ 2.427973] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
573[ 2.435300] usb usb2: Product: OHCI PCI host controller
574[ 2.440612] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
575[ 2.446792] usb usb2: SerialNumber: 0000:00:02.0
576[ 2.451749] hub 2-0:1.0: USB hub found
577[ 2.455639] hub 2-0:1.0: 10 ports detected
578[ 2.473306] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
579[ 2.483727] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
580[ 2.493596] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
581[ 2.501562] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
582[ 2.515210] FS-Cache: Loaded
583[ 2.522168] RPC: Registered named UNIX socket transport module.
584[ 2.528794] RPC: Registered udp transport module.
585[ 2.534875] RPC: Registered tcp transport module.
586[ 2.541015] RPC: Registered tcp NFSv4.1 backchannel transport module.
587[ 2.553486] FS-Cache: Netfs 'nfs' registered for caching
588[ 2.568330] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
589[ 2.612859] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
590[ 2.728688] tsc: Refined TSC clocksource calibration: 1909.787 MHz
591[ 3.732437] Switched to clocksource tsc
592[ 4.263027] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
593[ 4.269691] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
594[ 4.276657] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
595[ 12.844343] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
596[ 12.858223] systemd[1]: Detected architecture 'x86-64'.
597[ 14.414247] random: nonblocking pool is initialized
598[ 15.570106] systemd[1]: Inserted module 'autofs4'
599[ 15.579668] systemd[1]: Set hostname to <cb-test-tgt>.
600[ 18.782502] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
601[ 18.795395] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
602[ 18.810969] systemd[1]: Expecting device dev-ttyS0.device...
603[ 18.827168] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
604[ 18.835017] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
605[ 18.842710] systemd[1]: Starting Remote File Systems (Pre).
606[ 18.859218] systemd[1]: Reached target Remote File Systems (Pre).
607[ 18.865526] systemd[1]: Starting Encrypted Volumes.
608[ 18.879221] systemd[1]: Reached target Encrypted Volumes.
609[ 18.884820] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
610[ 18.893044] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
611[ 18.901084] systemd[1]: Starting Paths.
612[ 18.915196] systemd[1]: Reached target Paths.
613[ 18.919774] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
614[ 18.943123] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
615[ 18.952706] systemd[1]: Starting Swap.
616[ 18.967114] systemd[1]: Reached target Swap.
617[ 18.971618] systemd[1]: Starting Root Slice.
618[ 18.983106] systemd[1]: Created slice Root Slice.
619[ 18.987966] systemd[1]: Starting User and Session Slice.
620[ 19.003100] systemd[1]: Created slice User and Session Slice.
621[ 19.008993] systemd[1]: Starting Delayed Shutdown Socket.
622[ 19.023097] systemd[1]: Listening on Delayed Shutdown Socket.
623[ 19.029004] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
624[ 19.107064] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
625[ 19.114161] systemd[1]: Starting Journal Socket (/dev/log).
626[ 19.147029] systemd[1]: Listening on Journal Socket (/dev/log).
627[ 19.153089] systemd[1]: Starting udev Kernel Socket.
628[ 19.171030] systemd[1]: Listening on udev Kernel Socket.
629[ 19.176490] systemd[1]: Starting udev Control Socket.
630[ 19.191029] systemd[1]: Listening on udev Control Socket.
631[ 19.196599] systemd[1]: Starting Journal Socket.
632[ 19.211018] systemd[1]: Listening on Journal Socket.
633[ 19.216163] systemd[1]: Starting System Slice.
634[ 19.231015] systemd[1]: Created slice System Slice.
635[ 19.236039] systemd[1]: Starting system-getty.slice.
636[ 19.251009] systemd[1]: Created slice system-getty.slice.
637[ 19.256529] systemd[1]: Starting system-serial\x2dgetty.slice.
638[ 19.270999] systemd[1]: Created slice system-serial\x2dgetty.slice.
639[ 19.277425] systemd[1]: Starting Increase datagram queue length...
640[ 19.295924] systemd[1]: Mounting Debug File System...
641[ 19.312004] systemd[1]: Mounting POSIX Message Queue File System...
642[ 19.626556] systemd[1]: Starting Load Kernel Modules...
643[ 20.179330] systemd[1]: Started Set Up Additional Binary Formats.
644[ 20.189686] systemd[1]: Starting Create list of required static device nodes for the current kernel...
645[ 20.212311] systemd[1]: Starting udev Coldplug all Devices...
646[ 20.228274] systemd[1]: Mounting Huge Pages File System...
647[ 20.244317] systemd[1]: Starting Slices.
648[ 20.258677] systemd[1]: Reached target Slices.
649[ 20.263393] systemd[1]: Starting Remount Root and Kernel File Systems...
650[ 21.386388] systemd[1]: Started Increase datagram queue length.
651[ 21.393200] systemd[1]: Starting Syslog Socket.
652[ 21.406352] systemd[1]: Listening on Syslog Socket.
653[ 21.411422] systemd[1]: Starting Sockets.
654[ 21.426263] systemd[1]: Reached target Sockets.
655[ 21.430980] systemd[1]: Starting Journal Service...
656[ 21.458327] systemd[1]: Started Journal Service.
657[ 25.207994] systemd-journald[172]: Received request to flush runtime journal from PID 1
658[ 25.212002] systemd-udevd[189]: starting version 215
659[ 32.826339] EDAC MC: Ver: 3.0.0
660[ 32.838286] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
661[ 32.846209] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
662[ 32.927348] MCE: In-kernel MCE decoding enabled.
663[ 32.938410] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
664[ 32.946924] ACPI: Power Button [PWRB]
665[ 32.950764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
666[ 32.958279] ACPI: Power Button [PWRF]
667[ 33.448790] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
668[ 33.580977] AMD64 EDAC driver v3.4.0
669[ 33.584761] EDAC amd64: DRAM ECC enabled.
670[ 33.588844] EDAC amd64: F10h detected (node 0).
671[ 33.593499] EDAC MC: DCT0 chip selects:
672[ 33.593502] EDAC amd64: MC: 0: 0MB 1: 0MB
673[ 33.598298] EDAC amd64: MC: 2: 0MB 3: 0MB
674[ 33.603102] EDAC amd64: MC: 4: 0MB 5: 0MB
675[ 33.607907] EDAC amd64: MC: 6: 1024MB 7: 1024MB
676[ 33.612705] EDAC MC: DCT1 chip selects:
677[ 33.612706] EDAC amd64: MC: 0: 0MB 1: 0MB
678[ 33.617516] EDAC amd64: MC: 2: 0MB 3: 0MB
679[ 33.622311] EDAC amd64: MC: 4: 0MB 5: 0MB
680[ 33.627103] EDAC amd64: MC: 6: 1024MB 7: 1024MB
681[ 33.631894] EDAC amd64: using x4 syndromes.
682[ 33.636164] EDAC amd64: MCT channel count: 2
683[ 33.640566] EDAC amd64: CS6: Registered DDR2 RAM
684[ 33.645274] EDAC amd64: CS7: Registered DDR2 RAM
685[ 33.650454] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
686[ 33.660386] EDAC amd64: DRAM ECC enabled.
687[ 33.664532] EDAC amd64: F10h detected (node 1).
688[ 33.669189] EDAC MC: DCT0 chip selects:
689[ 33.669191] EDAC amd64: MC: 0: 1024MB 1: 0MB
690[ 33.673980] EDAC amd64: MC: 2: 0MB 3: 0MB
691[ 33.678777] EDAC amd64: MC: 4: 0MB 5: 0MB
692[ 33.683576] EDAC amd64: MC: 6: 0MB 7: 0MB
693[ 33.688377] EDAC MC: DCT1 chip selects:
694[ 33.688379] EDAC amd64: MC: 0: 0MB 1: 0MB
695[ 33.693206] EDAC amd64: MC: 2: 0MB 3: 0MB
696[ 33.698021] EDAC amd64: MC: 4: 0MB 5: 0MB
697[ 33.702823] EDAC amd64: MC: 6: 0MB 7: 0MB
698[ 33.707642] EDAC amd64: using x4 syndromes.
699[ 33.711914] EDAC amd64: MCT channel count: 1
700[ 33.716313] EDAC amd64: CS0: Registered DDR2 RAM
701[ 33.721252] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
702[ 33.721993] FDC 0 is a post-1991 82077
703[ 33.735022] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
704[ 34.095882] SCSI subsystem initialized
705[ 34.233035] acpi-cpufreq: overriding BIOS provided _PSD data
706[ 34.441588] input: PC Speaker as /devices/platform/pcspkr/input/input4
707[ 34.476016] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
708[ 34.481338] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
709[ 34.572033] libata version 3.00 loaded.
710[ 34.819099] sata_nv 0000:00:07.0: version 3.5
711[ 34.819506] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
712[ 34.826217] scsi0 : sata_nv
713[ 34.829391] scsi1 : sata_nv
714[ 34.832404] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
715[ 34.839663] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
716[ 34.847174] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
717[ 34.853454] scsi2 : sata_nv
718[ 34.856497] scsi3 : sata_nv
719[ 34.859443] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
720[ 34.866673] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
721[ 35.157487] ata1: SATA link down (SStatus 0 SControl 300)
722[ 35.185479] ata3: SATA link down (SStatus 0 SControl 300)
723[ 35.386505] pata_amd 0000:00:06.0: version 0.4.1
724[ 35.387384] scsi4 : pata_amd
725[ 35.390656] scsi5 : pata_amd
726[ 35.393742] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
727[ 35.400822] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
728[ 35.473362] ata2: SATA link down (SStatus 0 SControl 300)
729[ 35.584837] kvm: Nested Virtualization enabled
730[ 35.589485] kvm: Nested Paging enabled
731[ 35.789256] ata4: SATA link down (SStatus 0 SControl 300)
732[ 72.931188] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****