blob: 9808af45b5836b22763bafd14c1b04a1dc19f566 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.19.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 3.19-1~exp1 (2015-02-12)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c53fff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000c7c54000-0x00000000dfffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.3-276-gf2134f3 02/20/2016
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000 mask F80000000 write-back
26[ 0.000000] 1 base 080000000 mask FC0000000 write-back
27[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 000000021f000000 aka 8688M
34[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
35[ 0.000000] found SMP MP-table at [mem 0x000f5010-0x000f501f] mapped at [c00f5010]
36[ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
37[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
38[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
39[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
40[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
41[ 0.000000] [mem 0x37600000-0x377fffff] page 2M
42[ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
43[ 0.000000] [mem 0x20000000-0x375fffff] page 2M
44[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
45[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
46[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
47[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
48[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
49[ 0.000000] BRK [0x017ee000, 0x017eefff] PGTABLE
50[ 0.000000] BRK [0x017ef000, 0x017f0fff] PGTABLE
51[ 0.000000] BRK [0x017f1000, 0x017f1fff] PGTABLE
52[ 0.000000] BRK [0x017f2000, 0x017f2fff] PGTABLE
53[ 0.000000] RAMDISK: [mem 0x35fd6000-0x36fe2fff]
54[ 0.000000] ACPI: Early table checksum verification disabled
55[ 0.000000] ACPI: RSDP 0x000F5210 000024 (v02 CORE )
56[ 0.000000] ACPI: XSDT 0xC7C6F0E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 0xC7C71740 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 0xC7C6F280 0024B6 (v02 ASROCK COREBOOT 00010001 INTL 20140926)
59[ 0.000000] ACPI: FACS 0xC7C6F240 000040
60[ 0.000000] ACPI: SSDT 0xC7C71840 000046 (v02 CORE COREBOOT 0000002A CORE 0000002A)
61[ 0.000000] ACPI: TCPA 0xC7C71890 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: APIC 0xC7C718D0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: HEST 0xC7C71930 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: SSDT 0xC7C71960 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
65[ 0.000000] ACPI: SSDT 0xC7C72FF0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
66[ 0.000000] ACPI: HPET 0xC7C733D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: Local APIC address 0xfee00000
68[ 0.000000] 7798MB HIGHMEM available.
69[ 0.000000] 889MB LOWMEM available.
70[ 0.000000] mapped low ram: 0 - 379fe000
71[ 0.000000] low ram: 0 - 379fe000
72[ 0.000000] Zone ranges:
73[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
74[ 0.000000] Normal [mem 0x01000000-0x379fdfff]
75[ 0.000000] HighMem [mem 0x379fe000-0x1effffff]
76[ 0.000000] Movable zone start for each node
77[ 0.000000] Early memory node ranges
78[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
79[ 0.000000] node 0: [mem 0x00100000-0xc7c53fff]
80[ 0.000000] node 0: [mem 0x00000000-0x1effffff]
81[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1effffff]
82[ 0.000000] On node 0 totalpages: 1993714
83[ 0.000000] free_area_init_node: node 0, pgdat c16a9740, node_mem_map f137a024
84[ 0.000000] DMA zone: 36 pages used for memmap
85[ 0.000000] DMA zone: 0 pages reserved
86[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
87[ 0.000000] Normal zone: 1967 pages used for memmap
88[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
89[ 0.000000] HighMem zone: 1765974 pages, LIFO batch:31
90[ 0.000000] Using APIC driver default
91[ 0.000000] ACPI: PM-Timer IO Port: 0x808
92[ 0.000000] ACPI: Local APIC address 0xfee00000
93[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
94[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
95[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
96[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
97[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
98[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
99[ 0.000000] ACPI: IRQ0 used by override.
100[ 0.000000] ACPI: IRQ9 used by override.
101[ 0.000000] Using ACPI (MADT) for SMP configuration information
102[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
103[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
104[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
105[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
106[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
107[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
108[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
109[ 0.000000] Booting paravirtualized kernel on bare hardware
110[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
111[ 0.000000] PERCPU: Embedded 17 pages/cpu @f79ca000 s40064 r0 d29568 u69632
112[ 0.000000] pcpu-alloc: s40064 r0 d29568 u69632 alloc=17*4096
113[ 0.000000] pcpu-alloc: [0] 0 [0] 1
114[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1991711
115[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-trunk-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
116[ 0.000000] PCIe ASPM is forcibly enabled
117[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
118[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
119[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
120[ 0.000000] Initializing CPU#0
121[ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
122[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
123[ 0.000000] Memory: 7871020K/7974856K available (4828K kernel code, 581K rwdata, 1484K rodata, 660K init, 468K bss, 103836K reserved, 0K cma-reserved, 7063896K highmem)
124[ 0.000000] virtual kernel memory layout:
125 fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
126 pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
127 vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
128 lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
129 .init : 0xc16bf000 - 0xc1764000 ( 660 kB)
130 .data : 0xc14b76c6 - 0xc16bd500 (2071 kB)
131 .text : 0xc1000000 - 0xc14b76c6 (4829 kB)
132[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
133[ 0.000000] Hierarchical RCU implementation.
134[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
135[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
136[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
137[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
138[ 0.000000] CPU 0 irqstacks, hard=f742a000 soft=f742c000
139[ 0.000000] spurious 8259A interrupt: IRQ7.
140[ 0.000000] Console: colour VGA+ 80x25
141[ 0.000000] console [tty0] enabled
142[ 0.000000] hpet clockevent registered
143[ 0.000000] tsc: Fast TSC calibration using PIT
144[ 0.000000] tsc: Detected 1600.042 MHz processor
145[ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.08 BogoMIPS (lpj=6400168)
146[ 0.000063] pid_max: default: 32768 minimum: 301
147[ 0.000081] ACPI: Core revision 20141107
148[ 0.006296] ACPI: All ACPI Tables successfully acquired
149[ 0.006348] Security Framework initialized
150[ 0.006368] AppArmor: AppArmor disabled by boot time parameter
151[ 0.006371] Yama: disabled by default; enable with sysctl kernel.yama.*
152[ 0.006406] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
153[ 0.006411] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
154[ 0.006793] Initializing cgroup subsys memory
155[ 0.006805] Initializing cgroup subsys devices
156[ 0.006812] Initializing cgroup subsys freezer
157[ 0.006818] Initializing cgroup subsys net_cls
158[ 0.006825] Initializing cgroup subsys blkio
159[ 0.006831] Initializing cgroup subsys perf_event
160[ 0.006837] Initializing cgroup subsys net_prio
161[ 0.006879] CPU: Physical Processor ID: 0
162[ 0.006882] CPU: Processor Core ID: 0
163[ 0.006888] mce: CPU supports 6 MCE banks
164[ 0.006907] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
165Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
166[ 0.007196] Freeing SMP alternatives memory: 20K (c1764000 - c1769000)
167[ 0.009238] ftrace: allocating 21223 entries in 42 pages
168[ 0.028595] Enabling APIC mode: Flat. Using 1 I/O APICs
169[ 0.029069] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
170[ 0.068761] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
171[ 0.176486] Performance Events: AMD PMU driver.
172[ 0.176496] ... version: 0
173[ 0.176499] ... bit width: 48
174[ 0.176501] ... generic registers: 4
175[ 0.176504] ... value mask: 0000ffffffffffff
176[ 0.176507] ... max period: 00007fffffffffff
177[ 0.176509] ... fixed-purpose events: 0
178[ 0.176512] ... event mask: 000000000000000f
179[ 0.177643] CPU 1 irqstacks, hard=f7524000 soft=f7526000
180[ 0.177648] x86: Booting SMP configuration:
181[ 0.177651] .... node #0, CPUs: #1
182[ 0.188655] Initializing CPU#1
183[ 0.190854] x86: Booted up 1 node, 2 CPUs
184[ 0.190860] smpboot: Total of 2 processors activated (6400.16 BogoMIPS)
185[ 0.191765] devtmpfs: initialized
186[ 0.192712] pinctrl core: initialized pinctrl subsystem
187[ 0.192980] NET: Registered protocol family 16
188[ 0.203183] cpuidle: using governor ladder
189[ 0.212721] cpuidle: using governor menu
190[ 0.213083] ACPI: bus type PCI registered
191[ 0.213089] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
192[ 0.213432] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
193[ 0.213436] bios32_service(0x49435024): not present
194[ 0.213439] PCI: Using configuration type 1 for base access
195[ 0.213441] PCI: Using configuration type 1 for extended access
196[ 0.224720] ACPI: Added _OSI(Module Device)
197[ 0.224729] ACPI: Added _OSI(Processor Device)
198[ 0.224732] ACPI: Added _OSI(3.0 _SCP Extensions)
199[ 0.224736] ACPI: Added _OSI(Processor Aggregator Device)
200[ 0.226904] ACPI: Executed 2 blocks of module-level executable AML code
201[ 0.231315] ACPI: Interpreter enabled
202[ 0.231338] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
203[ 0.231363] ACPI: (supports S0 S1 S3 S4 S5)
204[ 0.231367] ACPI: Using IOAPIC for interrupt routing
205[ 0.231400] HEST: Table parsing has been initialized.
206[ 0.231407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
207[ 0.238377] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
208[ 0.238391] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
209[ 0.238543] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
210[ 0.239112] PCI host bridge to bus 0000:00
211[ 0.239120] pci_bus 0000:00: root bus resource [bus 00-ff]
212[ 0.239125] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
213[ 0.239129] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
214[ 0.239134] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
215[ 0.239139] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
216[ 0.239156] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
217[ 0.239360] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
218[ 0.239381] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
219[ 0.239392] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
220[ 0.239403] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
221[ 0.239474] pci 0000:00:01.0: supports D1 D2
222[ 0.239562] pci 0000:00:01.0: System wakeup disabled by ACPI
223[ 0.239655] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
224[ 0.239672] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
225[ 0.239755] pci 0000:00:01.1: supports D1 D2
226[ 0.239840] pci 0000:00:01.1: System wakeup disabled by ACPI
227[ 0.240028] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
228[ 0.240056] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
229[ 0.240071] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
230[ 0.240086] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
231[ 0.240100] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
232[ 0.240115] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
233[ 0.240130] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
234[ 0.240368] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
235[ 0.240389] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
236[ 0.240556] pci 0000:00:12.0: System wakeup disabled by ACPI
237[ 0.240720] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
238[ 0.240748] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
239[ 0.240864] pci 0000:00:12.2: supports D1 D2
240[ 0.240869] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
241[ 0.240959] pci 0000:00:12.2: System wakeup disabled by ACPI
242[ 0.241122] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
243[ 0.241142] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
244[ 0.241299] pci 0000:00:13.0: System wakeup disabled by ACPI
245[ 0.241392] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
246[ 0.241420] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
247[ 0.241536] pci 0000:00:13.2: supports D1 D2
248[ 0.241539] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
249[ 0.241628] pci 0000:00:13.2: System wakeup disabled by ACPI
250[ 0.241793] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
251[ 0.242103] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
252[ 0.242134] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
253[ 0.242229] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
254[ 0.242395] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
255[ 0.242699] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
256[ 0.242832] pci 0000:00:14.4: System wakeup disabled by ACPI
257[ 0.242987] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
258[ 0.243007] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
259[ 0.243165] pci 0000:00:14.5: System wakeup disabled by ACPI
260[ 0.243279] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
261[ 0.243390] pci 0000:00:15.0: supports D1 D2
262[ 0.243485] pci 0000:00:15.0: System wakeup disabled by ACPI
263[ 0.243643] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
264[ 0.243761] pci 0000:00:15.1: supports D1 D2
265[ 0.243856] pci 0000:00:15.1: System wakeup disabled by ACPI
266[ 0.244015] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
267[ 0.244194] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
268[ 0.244364] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
269[ 0.244549] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
270[ 0.244741] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
271[ 0.244912] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
272[ 0.245084] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
273[ 0.245259] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
274[ 0.245627] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
275[ 0.245642] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
276[ 0.245647] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
277[ 0.245651] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
278[ 0.245656] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
279[ 0.245836] pci 0000:00:15.0: PCI bridge to [bus 02]
280[ 0.246053] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
281[ 0.246083] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
282[ 0.246123] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
283[ 0.246150] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
284[ 0.246287] pci 0000:03:00.0: supports D1 D2
285[ 0.246291] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.252752] pci 0000:00:15.1: PCI bridge to [bus 03]
287[ 0.252771] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
288[ 0.252786] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
289[ 0.252828] pci_bus 0000:00: on NUMA node 0
290[ 0.253840] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
291[ 0.254085] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
292[ 0.254238] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
293[ 0.254339] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
294[ 0.254514] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
295[ 0.254691] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
296[ 0.254785] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
297[ 0.254955] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
298[ 0.255220] ACPI: Enabled 6 GPEs in block 00 to 1F
299[ 0.255622] vgaarb: setting as boot device: PCI:0000:00:01.0
300[ 0.255632] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
301[ 0.255645] vgaarb: loaded
302[ 0.255648] vgaarb: bridge control possible 0000:00:01.0
303[ 0.255968] PCI: Using ACPI for IRQ routing
304[ 0.255979] PCI: pci_cache_line_size set to 64 bytes
305[ 0.256139] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
306[ 0.256145] e820: reserve RAM buffer [mem 0xc7c54000-0xc7ffffff]
307[ 0.256148] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
308[ 0.256611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
309[ 0.256620] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
310[ 0.258781] Switched to clocksource hpet
311[ 0.270947] pnp: PnP ACPI init
312[ 0.271398] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
313[ 0.271695] pnp: PnP ACPI: found 1 devices
314[ 0.271704] PnPBIOS: Disabled by ACPI PNP
315[ 0.316930] pci 0000:00:14.4: PCI bridge to [bus 01]
316[ 0.316956] pci 0000:00:15.0: PCI bridge to [bus 02]
317[ 0.316974] pci 0000:00:15.1: PCI bridge to [bus 03]
318[ 0.316981] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
319[ 0.316993] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
320[ 0.317005] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
321[ 0.317009] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
322[ 0.317014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
323[ 0.317018] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
324[ 0.317023] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
325[ 0.317027] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
326[ 0.317031] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
327[ 0.317035] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
328[ 0.317040] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
329[ 0.317044] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
330[ 0.317216] NET: Registered protocol family 2
331[ 0.317663] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
332[ 0.317702] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
333[ 0.317752] TCP: Hash tables configured (established 8192 bind 8192)
334[ 0.317802] TCP: reno registered
335[ 0.317808] UDP hash table entries: 512 (order: 2, 16384 bytes)
336[ 0.317822] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
337[ 0.318016] NET: Registered protocol family 1
338[ 0.318053] pci 0000:00:01.0: Video device with shadowed ROM
339[ 0.428268] PCI: CLS 64 bytes, default 64
340[ 0.428391] Unpacking initramfs...
341[ 1.082263] Freeing initrd memory: 16436K (f5fd6000 - f6fe3000)
342[ 1.082913] microcode: CPU0: patch_level=0x05000119
343[ 1.083005] microcode: CPU1: patch_level=0x05000119
344[ 1.083281] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
345[ 1.083290] LVT offset 0 assigned for vector 0x400
346[ 1.083324] perf: AMD IBS detected (0x000000ff)
347[ 1.084346] futex hash table entries: 512 (order: 3, 32768 bytes)
348[ 1.084475] audit: initializing netlink subsys (disabled)
349[ 1.084510] audit: type=2000 audit(1455993994.976:1): initialized
350[ 1.085354] HugeTLB registered 2 MB page size, pre-allocated 0 pages
351[ 1.085399] zpool: loaded
352[ 1.085694] VFS: Disk quotas dquot_6.5.2
353[ 1.085812] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
354[ 1.087218] alg: No test for stdrng (krng)
355[ 1.087272] bounce: pool size: 64 pages
356[ 1.087399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
357[ 1.087525] io scheduler noop registered
358[ 1.087532] io scheduler deadline registered
359[ 1.087558] io scheduler cfq registered (default)
360[ 1.088811] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
361[ 1.088821] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
362[ 1.088854] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
363[ 1.088859] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
364[ 1.088868] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
365[ 1.088883] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
366[ 1.088923] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
367[ 1.089039] GHES: Failed to enable APEI firmware first mode.
368[ 1.089051] isapnp: ISA Plug & Play support disabled
369[ 1.089415] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
370[ 1.110151] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
371[ 1.111993] Linux agpgart interface v0.103
372[ 1.112419] i8042: PNP: No PS/2 controller found. Probing ports directly.
373[ 1.116213] serio: i8042 KBD port at 0x60,0x64 irq 1
374[ 1.116233] serio: i8042 AUX port at 0x60,0x64 irq 12
375[ 1.117063] mousedev: PS/2 mouse device common for all mice
376[ 1.117286] rtc_cmos 00:00: RTC can wake from S4
377[ 1.117730] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
378[ 1.117847] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
379[ 1.117894] ledtrig-cpu: registered to indicate activity on CPUs
380[ 1.118211] TCP: cubic registered
381[ 1.118379] NET: Registered protocol family 10
382[ 1.118881] mip6: Mobile IPv6
383[ 1.118888] NET: Registered protocol family 17
384[ 1.118897] mpls_gso: MPLS GSO support
385[ 1.119325] Using IPI No-Shortcut mode
386[ 1.119987] registered taskstats version 1
387[ 1.120788] rtc_cmos 00:00: setting system clock to 2016-02-20 18:46:35 UTC (1455993995)
388[ 1.120873] PM: Hibernation image not present or could not be loaded.
389[ 1.121419] Freeing unused kernel memory: 660K (c16bf000 - c1764000)
390[ 1.121583] Write protecting the kernel text: 4832k
391[ 1.121721] Write protecting the kernel read-only data: 1488k
392[ 1.121724] NX-protecting the kernel data: 3360k
393[ 1.213498] systemd-udevd[64]: starting version 215
394[ 1.214289] random: systemd-udevd urandom read with 0 bits of entropy available
395[ 1.233523] ACPI: bus type USB registered
396[ 1.233588] usbcore: registered new interface driver usbfs
397[ 1.233614] usbcore: registered new interface driver hub
398[ 1.240703] usbcore: registered new device driver usb
399[ 1.241720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
400[ 1.242053] ehci-pci: EHCI PCI platform driver
401[ 1.242466] QUIRK: Enable AMD PLL fix
402[ 1.242509] ehci-pci 0000:00:12.2: EHCI Host Controller
403[ 1.242523] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
404[ 1.242535] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
405[ 1.242621] ehci-pci 0000:00:12.2: debug port 1
406[ 1.242693] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
407[ 1.243596] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
408[ 1.246248] SCSI subsystem initialized
409[ 1.249139] libata version 3.00 loaded.
410[ 1.251276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
411[ 1.251414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
412[ 1.251419] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
413[ 1.251424] usb usb1: Product: EHCI Host Controller
414[ 1.251428] usb usb1: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd
415[ 1.251432] usb usb1: SerialNumber: 0000:00:12.2
416[ 1.251728] hub 1-0:1.0: USB hub found
417[ 1.251746] hub 1-0:1.0: 5 ports detected
418[ 1.252429] ehci-pci 0000:00:13.2: EHCI Host Controller
419[ 1.252444] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
420[ 1.252452] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
421[ 1.252469] ehci-pci 0000:00:13.2: debug port 1
422[ 1.252521] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
423[ 1.255620] thermal LNXTHERM:00: registered as thermal_zone0
424[ 1.255629] ACPI: Thermal Zone [TZ00] (36 C)
425[ 1.263153] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
426[ 1.263292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
427[ 1.263297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
428[ 1.263302] usb usb2: Product: EHCI Host Controller
429[ 1.263306] usb usb2: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd
430[ 1.263310] usb usb2: SerialNumber: 0000:00:13.2
431[ 1.263591] hub 2-0:1.0: USB hub found
432[ 1.263610] hub 2-0:1.0: 5 ports detected
433[ 1.264641] ohci-pci: OHCI PCI platform driver
434[ 1.264926] ohci-pci 0000:00:12.0: OHCI PCI host controller
435[ 1.264944] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
436[ 1.265012] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
437[ 1.267275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
438[ 1.268132] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8240000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
439[ 1.268138] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
440[ 1.323448] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
441[ 1.323458] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
442[ 1.323463] usb usb3: Product: OHCI PCI host controller
443[ 1.323467] usb usb3: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
444[ 1.323471] usb usb3: SerialNumber: 0000:00:12.0
445[ 1.324062] hub 3-0:1.0: USB hub found
446[ 1.324086] hub 3-0:1.0: 5 ports detected
447[ 1.324744] ohci-pci 0000:00:13.0: OHCI PCI host controller
448[ 1.324758] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
449[ 1.324817] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
450[ 1.383313] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
451[ 1.383323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
452[ 1.383328] usb usb4: Product: OHCI PCI host controller
453[ 1.383332] usb usb4: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
454[ 1.383336] usb usb4: SerialNumber: 0000:00:13.0
455[ 1.383959] hub 4-0:1.0: USB hub found
456[ 1.383983] hub 4-0:1.0: 5 ports detected
457[ 1.384638] ohci-pci 0000:00:14.5: OHCI PCI host controller
458[ 1.384654] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
459[ 1.384705] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
460[ 1.443234] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
461[ 1.443244] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
462[ 1.443248] usb usb5: Product: OHCI PCI host controller
463[ 1.443253] usb usb5: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd
464[ 1.443257] usb usb5: SerialNumber: 0000:00:14.5
465[ 1.443864] hub 5-0:1.0: USB hub found
466[ 1.443889] hub 5-0:1.0: 2 ports detected
467[ 1.444210] ahci 0000:00:11.0: version 3.0
468[ 1.444835] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
469[ 1.444843] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
470[ 1.447167] scsi host0: ahci
471[ 1.449350] scsi host1: ahci
472[ 1.449563] scsi host2: ahci
473[ 1.449893] scsi host3: ahci
474[ 1.450151] scsi host4: ahci
475[ 1.450388] scsi host5: ahci
476[ 1.450569] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
477[ 1.450575] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
478[ 1.450580] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
479[ 1.450585] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
480[ 1.450590] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
481[ 1.450595] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
482[ 1.631188] usb 2-2: new high-speed USB device number 3 using ehci-pci
483[ 1.719118] usb 4-1: new low-speed USB device number 2 using ohci-pci
484[ 1.767041] ata1: SATA link down (SStatus 0 SControl 300)
485[ 1.771039] ata5: SATA link down (SStatus 0 SControl 300)
486[ 1.771130] ata3: SATA link down (SStatus 0 SControl 300)
487[ 1.771172] ata6: SATA link down (SStatus 0 SControl 300)
488[ 1.771203] ata2: SATA link down (SStatus 0 SControl 300)
489[ 1.780332] usb 2-2: New USB device found, idVendor=148f, idProduct=2870
490[ 1.780348] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
491[ 1.780357] usb 2-2: Product: 802.11 n WLAN
492[ 1.780365] usb 2-2: Manufacturer: Ralink
493[ 1.823122] usb 3-2: new full-speed USB device number 2 using ohci-pci
494[ 1.891319] usb 4-1: New USB device found, idVendor=046d, idProduct=c312
495[ 1.891336] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
496[ 1.891345] usb 4-1: Product: USB Multimedia Keyboard
497[ 1.891353] usb 4-1: Manufacturer: LITEON Technology
498[ 1.896066] hidraw: raw HID events driver (C) Jiri Kosina
499[ 1.902611] usbcore: registered new interface driver usbhid
500[ 1.902619] usbhid: USB HID core driver
501[ 1.904788] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/0003:046D:C312.0001/input/input2
502[ 1.943169] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
503[ 1.943938] ata4.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
504[ 1.943948] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
505[ 1.944545] ata4.00: configured for UDMA/100
506[ 1.945094] scsi 3:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
507[ 1.953472] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
508[ 1.953614] sd 3:0:0:0: [sda] Write Protect is off
509[ 1.953620] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
510[ 1.953663] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
511[ 1.954429] sda: sda1 sda2
512[ 1.955409] sd 3:0:0:0: [sda] Attached SCSI disk
513[ 1.956511] sd 3:0:0:0: Attached scsi generic sg0 type 0
514[ 1.963073] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-1/input0
515[ 1.988143] usb 3-2: New USB device found, idVendor=1b1a, idProduct=7001
516[ 1.988160] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
517[ 1.988169] usb 3-2: Product: USB Mouse
518[ 1.995304] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1B1A:7001.0002/input/input3
519[ 1.995483] hid-generic 0003:1B1A:7001.0002: input,hidraw1: USB HID v1.10 Mouse [ USB Mouse ] on usb-0000:00:12.0-2/input0
520[ 2.000501] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:1B1A:7001.0003/input/input4
521[ 2.055565] hid-generic 0003:1B1A:7001.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB Mouse ] on usb-0000:00:12.0-2/input1
522[ 2.078922] tsc: Refined TSC clocksource calibration: 1599.999 MHz
523[ 2.081762] device-mapper: uevent: version 1.0.3
524[ 2.081945] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
525[ 3.079433] Switched to clocksource tsc
526[ 10.707486] random: nonblocking pool is initialized
527[ 14.130544] NET: Registered protocol family 38
528[ 14.500825] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
529[ 15.311103] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
530[ 15.311240] systemd[1]: Found ordering cycle on basic.target/start
531[ 15.311248] systemd[1]: Found dependency on sysinit.target/start
532[ 15.311256] systemd[1]: Found dependency on rpcbind.service/start
533[ 15.311263] systemd[1]: Found dependency on network-online.target/start
534[ 15.311270] systemd[1]: Found dependency on network.target/start
535[ 15.311276] systemd[1]: Found dependency on systemd-networkd.service/start
536[ 15.311282] systemd[1]: Found dependency on dbus.service/start
537[ 15.311288] systemd[1]: Found dependency on basic.target/start
538[ 15.311295] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
539[ 15.311303] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
540[ 16.480492] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
541[ 16.614940] lp: driver loaded but no devices found
542[ 16.635321] ppdev: user-space parallel port driver
543[ 16.651370] fuse init (API version 7.23)
544[ 16.670150] w83627ehf: Found NCT6775F chip at 0x290
545[ 16.706468] systemd-udevd[248]: starting version 215
546[ 17.141000] ACPI: acpi_idle registered with cpuidle
547[ 17.158966] acpi-cpufreq: overriding BIOS provided _PSD data
548[ 17.164055] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
549[ 17.188925] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
550[ 17.188939] ACPI: Power Button [PWRB]
551[ 17.189051] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
552[ 17.189057] ACPI: Power Button [PWRF]
553[ 17.217852] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
554[ 17.218015] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
555[ 17.250963] [drm] Initialized drm 1.1.0 20060810
556[ 17.258949] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
557[ 17.259074] sp5100_tco: PCI Revision ID: 0x42
558[ 17.259167] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
559[ 17.259214] sp5100_tco: Last reboot was not triggered by watchdog.
560[ 17.259361] sp5100_tco: initialized (0xf829eb00). heartbeat=60 sec (nowayout=0)
561[ 17.302828] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
562[ 17.393995] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
563[ 17.412718] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
564[ 17.413296] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
565[ 17.413302] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
566[ 17.413311] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
567[ 17.413315] sound hdaudioC1D0: mono: mono_out=0x0
568[ 17.413320] sound hdaudioC1D0: dig-out=0x1e/0x0
569[ 17.413323] sound hdaudioC1D0: inputs:
570[ 17.413329] sound hdaudioC1D0: Rear Mic=0x18
571[ 17.413334] sound hdaudioC1D0: Front Mic=0x19
572[ 17.413337] sound hdaudioC1D0: Line=0x1a
573[ 17.413341] sound hdaudioC1D0: CD=0x1c
574[ 17.437368] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input8
575[ 17.448852] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
576[ 17.448938] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
577[ 17.449018] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
578[ 17.449270] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
579[ 17.449355] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
580[ 17.449433] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
581[ 17.449512] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
582[ 17.449591] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
583[ 17.511379] [drm] radeon kernel modesetting enabled.
584[ 17.572447] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
585[ 17.572490] [drm] register mmio base: 0xF0100000
586[ 17.572493] [drm] register mmio size: 262144
587[ 17.572642] ATOM BIOS: AMD
588[ 17.578298] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
589[ 17.578304] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
590[ 17.578308] [drm] Detected VRAM RAM=384M, BAR=256M
591[ 17.578311] [drm] RAM width 32bits DDR
592[ 17.604007] r8169 0000:03:00.0 eth10: renamed from eth0
593[ 17.609578] [TTM] Zone kernel: Available graphics memory: 412120 kiB
594[ 17.609587] [TTM] Zone highmem: Available graphics memory: 3944068 kiB
595[ 17.609590] [TTM] Initializing pool allocator
596[ 17.609605] [TTM] Initializing DMA pool allocator
597[ 17.609654] [drm] radeon: 384M of VRAM memory ready
598[ 17.609658] [drm] radeon: 1024M of GTT memory ready.
599[ 17.609683] [drm] Loading PALM Microcode
600[ 17.614238] kvm: Nested Virtualization enabled
601[ 17.614249] kvm: Nested Paging enabled
602[ 17.623066] systemd-udevd[284]: renamed network interface eth0 to eth10
603[ 17.699261] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
604[ 17.728899] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
605[ 17.754590] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
606[ 17.754611] [drm] Internal thermal controller without fan control
607[ 17.754910] [drm] Found smc ucode version: 0x00010601
608[ 17.767503] [drm] radeon: dpm initialized
609[ 17.795930] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
610[ 17.796024] [drm] GART: num cpu pages 262144, num gpu pages 262144
611[ 17.829166] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
612[ 17.829578] radeon 0000:00:01.0: WB enabled
613[ 17.829586] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffad6c00
614[ 17.829591] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffad6c0c
615[ 17.831513] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8b32118
616[ 17.834037] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
617[ 17.834046] [drm] Driver supports precise vblank timestamp query.
618[ 17.834053] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
619[ 17.834168] radeon 0000:00:01.0: radeon: using MSI.
620[ 17.834209] [drm] radeon: irq initialized.
621[ 17.853345] [drm] ring test on 0 succeeded in 1 usecs
622[ 17.853361] [drm] ring test on 3 succeeded in 3 usecs
623[ 17.901579] [drm] ring test on 5 succeeded in 1 usecs
624[ 17.923860] [drm] UVD initialized successfully.
625[ 17.924943] [drm] ib test on ring 0 succeeded in 0 usecs
626[ 17.924988] [drm] ib test on ring 3 succeeded in 0 usecs
627[ 18.064392] cfg80211: Calling CRDA to update world regulatory domain
628[ 18.262997] usb 2-2: reset high-speed USB device number 3 using ehci-pci
629[ 18.282973] cfg80211: World regulatory domain updated:
630[ 18.282987] cfg80211: DFS Master region: unset
631[ 18.282992] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
632[ 18.282999] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
633[ 18.283004] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
634[ 18.283009] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
635[ 18.283016] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
636[ 18.283022] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
637[ 18.283027] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
638[ 18.283032] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
639[ 18.283037] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
640[ 18.314036] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
641[ 18.410910] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
642[ 18.428744] systemd-journald[243]: Received request to flush runtime journal from PID 1
643[ 18.446836] [drm] ib test on ring 5 succeeded
644[ 18.475487] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
645[ 18.484802] [drm] Radeon Display Connectors
646[ 18.484810] [drm] Connector 0:
647[ 18.484813] [drm] HDMI-A-1
648[ 18.484816] [drm] HPD1
649[ 18.484821] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
650[ 18.484824] [drm] Encoders:
651[ 18.484827] [drm] DFP1: INTERNAL_UNIPHY
652[ 18.484829] [drm] Connector 1:
653[ 18.484832] [drm] HDMI-A-2
654[ 18.484834] [drm] HPD2
655[ 18.484838] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
656[ 18.484840] [drm] Encoders:
657[ 18.484842] [drm] DFP2: INTERNAL_UNIPHY
658[ 18.484844] [drm] Connector 2:
659[ 18.484846] [drm] VGA-1
660[ 18.484850] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
661[ 18.484852] [drm] Encoders:
662[ 18.484854] [drm] CRT1: INTERNAL_KLDSCP_DAC1
663[ 18.531427] [drm] fb mappable at 0xE0478000
664[ 18.531436] [drm] vram apper at 0xE0000000
665[ 18.531439] [drm] size 5242880
666[ 18.531442] [drm] fb depth is 24
667[ 18.531444] [drm] pitch is 5120
668[ 18.531727] fbcon: radeondrmfb (fb0) is primary device
669[ 18.542437] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
670[ 18.543202] usbcore: registered new interface driver rt2800usb
671[ 18.563441] rt2800usb 2-2:1.0 wlan1: renamed from wlan0
672[ 18.575865] Console: switching to colour frame buffer device 160x64
673[ 18.579141] systemd-udevd[284]: renamed network interface wlan0 to wlan1
674[ 18.587067] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
675[ 18.587071] radeon 0000:00:01.0: registered panic notifier
676[ 18.622896] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
677[ 19.175970] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
678[ 19.176804] rt2800usb 2-2:1.0: firmware: direct-loading firmware rt2870.bin
679[ 19.176829] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
680[ 19.391243] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
681[ 20.255402] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
682[ 20.394583] r8169 0000:03:00.0 eth10: link down
683[ 20.394675] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
684[ 68.066829] wlan1: authenticate with 34:31:c4:bd:c8:97
685[ 68.111046] wlan1: send auth to 34:31:c4:bd:c8:97 (try 1/3)
686[ 68.117869] wlan1: authenticated
687[ 68.118865] wlan1: associate with 34:31:c4:bd:c8:97 (try 1/3)
688[ 68.140881] wlan1: RX AssocResp from 34:31:c4:bd:c8:97 (capab=0x31 status=0 aid=2)
689[ 68.150158] wlan1: associated
690[ 68.150200] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
691[ 68.150571] cfg80211: Calling CRDA for country: DE
692[ 68.164221] cfg80211: Regulatory domain changed to country: DE
693[ 68.164235] cfg80211: DFS Master region: ETSI
694[ 68.164239] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
695[ 68.164244] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
696[ 68.164250] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
697[ 68.164255] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
698[ 68.164259] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
699[ 68.164263] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)