Paul Menzel | 2628571 | 2017-04-17 10:57:51 +0200 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.19.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 3.19-1~exp1 (2015-02-12) |
| 5 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 6 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 7 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 8 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c54fff] usable |
| 10 | [ 0.000000] BIOS-e820: [mem 0x00000000c7c55000-0x00000000dfffffff] reserved |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable |
| 13 | [ 0.000000] NX (Execute Disable) protection: active |
| 14 | [ 0.000000] SMBIOS 2.7 present. |
| 15 | [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.2-916-gc7b2b7c 01/23/2016 |
| 16 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 17 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 18 | [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000 |
| 19 | [ 0.000000] MTRR default type: uncachable |
| 20 | [ 0.000000] MTRR fixed ranges enabled: |
| 21 | [ 0.000000] 00000-9FFFF write-back |
| 22 | [ 0.000000] A0000-BFFFF uncachable |
| 23 | [ 0.000000] C0000-FFFFF write-back |
| 24 | [ 0.000000] MTRR variable ranges enabled: |
| 25 | [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| 26 | [ 0.000000] 1 base 080000000 mask FC0000000 write-back |
| 27 | [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back |
| 28 | [ 0.000000] 3 disabled |
| 29 | [ 0.000000] 4 disabled |
| 30 | [ 0.000000] 5 disabled |
| 31 | [ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect |
| 32 | [ 0.000000] 7 disabled |
| 33 | [ 0.000000] TOM2: 000000021f000000 aka 8688M |
| 34 | [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC |
| 35 | [ 0.000000] found SMP MP-table at [mem 0x000f5c70-0x000f5c7f] mapped at [c00f5c70] |
| 36 | [ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff] |
| 37 | [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 |
| 38 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 39 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 40 | [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff] |
| 41 | [ 0.000000] [mem 0x37600000-0x377fffff] page 2M |
| 42 | [ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff] |
| 43 | [ 0.000000] [mem 0x20000000-0x375fffff] page 2M |
| 44 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] |
| 45 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 46 | [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M |
| 47 | [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff] |
| 48 | [ 0.000000] [mem 0x37800000-0x379fdfff] page 4k |
| 49 | [ 0.000000] BRK [0x017ee000, 0x017eefff] PGTABLE |
| 50 | [ 0.000000] BRK [0x017ef000, 0x017f0fff] PGTABLE |
| 51 | [ 0.000000] BRK [0x017f1000, 0x017f1fff] PGTABLE |
| 52 | [ 0.000000] BRK [0x017f2000, 0x017f2fff] PGTABLE |
| 53 | [ 0.000000] log_buf_len: 2097152 bytes |
| 54 | [ 0.000000] early log buf free: 127956(97%) |
| 55 | [ 0.000000] RAMDISK: [mem 0x35c0c000-0x36dfdfff] |
| 56 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 57 | [ 0.000000] ACPI: RSDP 0x000F5E70 000024 (v02 CORE ) |
| 58 | [ 0.000000] ACPI: XSDT 0xC7C700E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 59 | [ 0.000000] ACPI: FACP 0xC7C72740 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| 60 | [ 0.000000] ACPI: DSDT 0xC7C70280 0024B8 (v02 ASROCK COREBOOT 00010001 INTL 20160108) |
| 61 | [ 0.000000] ACPI: FACS 0xC7C70240 000040 |
| 62 | [ 0.000000] ACPI: SSDT 0xC7C72840 000046 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 63 | [ 0.000000] ACPI: TCPA 0xC7C72890 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 64 | [ 0.000000] ACPI: APIC 0xC7C728D0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 65 | [ 0.000000] ACPI: HEST 0xC7C72930 000028 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 66 | [ 0.000000] ACPI: SSDT 0xC7C72960 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| 67 | [ 0.000000] ACPI: SSDT 0xC7C73FF0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| 68 | [ 0.000000] ACPI: HPET 0xC7C743D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 69 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 70 | [ 0.000000] 7798MB HIGHMEM available. |
| 71 | [ 0.000000] 889MB LOWMEM available. |
| 72 | [ 0.000000] mapped low ram: 0 - 379fe000 |
| 73 | [ 0.000000] low ram: 0 - 379fe000 |
| 74 | [ 0.000000] Zone ranges: |
| 75 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 76 | [ 0.000000] Normal [mem 0x01000000-0x379fdfff] |
| 77 | [ 0.000000] HighMem [mem 0x379fe000-0x1effffff] |
| 78 | [ 0.000000] Movable zone start for each node |
| 79 | [ 0.000000] Early memory node ranges |
| 80 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 81 | [ 0.000000] node 0: [mem 0x00100000-0xc7c54fff] |
| 82 | [ 0.000000] node 0: [mem 0x00000000-0x1effffff] |
| 83 | [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1effffff] |
| 84 | [ 0.000000] On node 0 totalpages: 1993715 |
| 85 | [ 0.000000] free_area_init_node: node 0, pgdat c16a9740, node_mem_map f0fb0024 |
| 86 | [ 0.000000] DMA zone: 36 pages used for memmap |
| 87 | [ 0.000000] DMA zone: 0 pages reserved |
| 88 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 89 | [ 0.000000] Normal zone: 1967 pages used for memmap |
| 90 | [ 0.000000] Normal zone: 223742 pages, LIFO batch:31 |
| 91 | [ 0.000000] HighMem zone: 1765975 pages, LIFO batch:31 |
| 92 | [ 0.000000] Using APIC driver default |
| 93 | [ 0.000000] ACPI: PM-Timer IO Port: 0x808 |
| 94 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 95 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 96 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 97 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 98 | [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| 99 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 100 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| 101 | [ 0.000000] ACPI: IRQ0 used by override. |
| 102 | [ 0.000000] ACPI: IRQ9 used by override. |
| 103 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 104 | [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| 105 | [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| 106 | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| 107 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 108 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 109 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 110 | [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| 111 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 112 | [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 |
| 113 | [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77c9000 s40064 r0 d29568 u69632 |
| 114 | [ 0.000000] pcpu-alloc: s40064 r0 d29568 u69632 alloc=17*4096 |
| 115 | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 |
| 116 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1991712 |
| 117 | [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-trunk-686-pae root=/dev/mapper/speicher-root ro init=/sbin/init drm_kms_helper.poll=0 drm.debug=0x06 log_buf_len=2M quiet noisapnp console=ttyS0,115200 console=tty0 pcie_aspm=force pcie_aspm.policy=powersave radeon.dpm=1 |
| 118 | [ 0.000000] PCIe ASPM is forcibly enabled |
| 119 | [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) |
| 120 | [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| 121 | [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| 122 | [ 0.000000] Initializing CPU#0 |
| 123 | [ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000) |
| 124 | [ 0.000000] Initializing Movable for node 0 (00000000:00000000) |
| 125 | [ 0.000000] Memory: 7867032K/7974860K available (4828K kernel code, 581K rwdata, 1484K rodata, 660K init, 468K bss, 107828K reserved, 0K cma-reserved, 7063900K highmem) |
| 126 | [ 0.000000] virtual kernel memory layout: |
| 127 | fixmap : 0xffd36000 - 0xfffff000 (2852 kB) |
| 128 | pkmap : 0xffa00000 - 0xffc00000 (2048 kB) |
| 129 | vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) |
| 130 | lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) |
| 131 | .init : 0xc16bf000 - 0xc1764000 ( 660 kB) |
| 132 | .data : 0xc14b76c6 - 0xc16bd500 (2071 kB) |
| 133 | .text : 0xc1000000 - 0xc14b76c6 (4829 kB) |
| 134 | [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| 135 | [ 0.000000] Hierarchical RCU implementation. |
| 136 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 137 | [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. |
| 138 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| 139 | [ 0.000000] NR_IRQS:2304 nr_irqs:440 16 |
| 140 | [ 0.000000] CPU 0 irqstacks, hard=f702a000 soft=f702c000 |
| 141 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 142 | [ 0.000000] Console: colour VGA+ 80x25 |
| 143 | [ 0.000000] console [tty0] enabled |
| 144 | [ 0.000000] console [ttyS0] enabled |
| 145 | [ 0.000000] hpet clockevent registered |
| 146 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 147 | [ 0.000000] tsc: Detected 1600.049 MHz processor |
| 148 | [ 0.000056] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.09 BogoMIPS (lpj=6400196) |
| 149 | [ 0.000063] pid_max: default: 32768 minimum: 301 |
| 150 | [ 0.000082] ACPI: Core revision 20141107 |
| 151 | [ 0.006293] ACPI: All ACPI Tables successfully acquired |
| 152 | [ 0.006346] Security Framework initialized |
| 153 | [ 0.006366] AppArmor: AppArmor disabled by boot time parameter |
| 154 | [ 0.006369] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 155 | [ 0.006404] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| 156 | [ 0.006409] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| 157 | [ 0.006797] Initializing cgroup subsys memory |
| 158 | [ 0.006809] Initializing cgroup subsys devices |
| 159 | [ 0.006816] Initializing cgroup subsys freezer |
| 160 | [ 0.006822] Initializing cgroup subsys net_cls |
| 161 | [ 0.006830] Initializing cgroup subsys blkio |
| 162 | [ 0.006835] Initializing cgroup subsys perf_event |
| 163 | [ 0.006841] Initializing cgroup subsys net_prio |
| 164 | [ 0.006884] CPU: Physical Processor ID: 0 |
| 165 | [ 0.006887] CPU: Processor Core ID: 0 |
| 166 | [ 0.006892] mce: CPU supports 6 MCE banks |
| 167 | [ 0.006912] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| 168 | Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| 169 | [ 0.007204] Freeing SMP alternatives memory: 20K (c1764000 - c1769000) |
| 170 | [ 0.009253] ftrace: allocating 21223 entries in 42 pages |
| 171 | [ 0.028714] Enabling APIC mode: Flat. Using 1 I/O APICs |
| 172 | [ 0.029143] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 173 | [ 0.068835] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00) |
| 174 | [ 0.176346] Performance Events: AMD PMU driver. |
| 175 | [ 0.176356] ... version: 0 |
| 176 | [ 0.176359] ... bit width: 48 |
| 177 | [ 0.176361] ... generic registers: 4 |
| 178 | [ 0.176364] ... value mask: 0000ffffffffffff |
| 179 | [ 0.176367] ... max period: 00007fffffffffff |
| 180 | [ 0.176370] ... fixed-purpose events: 0 |
| 181 | [ 0.176372] ... event mask: 000000000000000f |
| 182 | [ 0.177428] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 183 | [ 0.177612] CPU 1 irqstacks, hard=f7128000 soft=f712a000 |
| 184 | [ 0.177616] x86: Booting SMP configuration: |
| 185 | [ 0.177620] .... node #0, CPUs: #1 |
| 186 | [ 0.188625] Initializing CPU#1 |
| 187 | [ 0.190792] x86: Booted up 1 node, 2 CPUs |
| 188 | [ 0.190797] smpboot: Total of 2 processors activated (6400.19 BogoMIPS) |
| 189 | [ 0.191768] devtmpfs: initialized |
| 190 | [ 0.192844] pinctrl core: initialized pinctrl subsystem |
| 191 | [ 0.193128] NET: Registered protocol family 16 |
| 192 | [ 0.207029] cpuidle: using governor ladder |
| 193 | [ 0.219030] cpuidle: using governor menu |
| 194 | [ 0.219425] ACPI: bus type PCI registered |
| 195 | [ 0.219431] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 196 | [ 0.219860] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. |
| 197 | [ 0.219864] bios32_service(0x49435024): not present |
| 198 | [ 0.219867] PCI: Using configuration type 1 for base access |
| 199 | [ 0.219870] PCI: Using configuration type 1 for extended access |
| 200 | [ 0.232428] ACPI: Added _OSI(Module Device) |
| 201 | [ 0.232437] ACPI: Added _OSI(Processor Device) |
| 202 | [ 0.232440] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 203 | [ 0.232443] ACPI: Added _OSI(Processor Aggregator Device) |
| 204 | [ 0.234601] ACPI: Executed 2 blocks of module-level executable AML code |
| 205 | [ 0.238980] ACPI: Interpreter enabled |
| 206 | [ 0.239003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) |
| 207 | [ 0.239029] ACPI: (supports S0 S1 S3 S4 S5) |
| 208 | [ 0.239033] ACPI: Using IOAPIC for interrupt routing |
| 209 | [ 0.239066] HEST: Table parsing has been initialized. |
| 210 | [ 0.239073] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 211 | [ 0.246015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 212 | [ 0.246030] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 213 | [ 0.246184] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 214 | [ 0.246749] PCI host bridge to bus 0000:00 |
| 215 | [ 0.246757] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 216 | [ 0.246762] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 217 | [ 0.246767] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| 218 | [ 0.246771] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 219 | [ 0.246776] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| 220 | [ 0.246801] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| 221 | [ 0.247003] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| 222 | [ 0.247023] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| 223 | [ 0.247034] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| 224 | [ 0.247046] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff] |
| 225 | [ 0.247117] pci 0000:00:01.0: supports D1 D2 |
| 226 | [ 0.247204] pci 0000:00:01.0: System wakeup disabled by ACPI |
| 227 | [ 0.247295] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| 228 | [ 0.247312] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff] |
| 229 | [ 0.247394] pci 0000:00:01.1: supports D1 D2 |
| 230 | [ 0.247481] pci 0000:00:01.1: System wakeup disabled by ACPI |
| 231 | [ 0.247672] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| 232 | [ 0.247700] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| 233 | [ 0.247715] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| 234 | [ 0.247730] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| 235 | [ 0.247744] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| 236 | [ 0.247759] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| 237 | [ 0.247773] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff] |
| 238 | [ 0.248054] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| 239 | [ 0.248075] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff] |
| 240 | [ 0.248232] pci 0000:00:12.0: System wakeup disabled by ACPI |
| 241 | [ 0.248393] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| 242 | [ 0.248421] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff] |
| 243 | [ 0.248537] pci 0000:00:12.2: supports D1 D2 |
| 244 | [ 0.248541] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| 245 | [ 0.248631] pci 0000:00:12.2: System wakeup disabled by ACPI |
| 246 | [ 0.248760] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| 247 | [ 0.248781] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff] |
| 248 | [ 0.248938] pci 0000:00:13.0: System wakeup disabled by ACPI |
| 249 | [ 0.249101] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| 250 | [ 0.249128] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff] |
| 251 | [ 0.249244] pci 0000:00:13.2: supports D1 D2 |
| 252 | [ 0.249248] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| 253 | [ 0.249337] pci 0000:00:13.2: System wakeup disabled by ACPI |
| 254 | [ 0.249497] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| 255 | [ 0.249770] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| 256 | [ 0.249801] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit] |
| 257 | [ 0.249896] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| 258 | [ 0.250129] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| 259 | [ 0.250433] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| 260 | [ 0.250569] pci 0000:00:14.4: System wakeup disabled by ACPI |
| 261 | [ 0.250721] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| 262 | [ 0.250741] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff] |
| 263 | [ 0.250906] pci 0000:00:14.5: System wakeup disabled by ACPI |
| 264 | [ 0.251065] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| 265 | [ 0.251176] pci 0000:00:15.0: supports D1 D2 |
| 266 | [ 0.251270] pci 0000:00:15.0: System wakeup disabled by ACPI |
| 267 | [ 0.251426] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 |
| 268 | [ 0.251544] pci 0000:00:15.1: supports D1 D2 |
| 269 | [ 0.251639] pci 0000:00:15.1: System wakeup disabled by ACPI |
| 270 | [ 0.251768] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| 271 | [ 0.251945] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| 272 | [ 0.252116] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| 273 | [ 0.252289] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| 274 | [ 0.252482] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| 275 | [ 0.252653] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| 276 | [ 0.252824] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| 277 | [ 0.252993] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| 278 | [ 0.253354] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| 279 | [ 0.253370] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| 280 | [ 0.253374] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) |
| 281 | [ 0.253379] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| 282 | [ 0.253383] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| 283 | [ 0.253490] pci 0000:00:15.0: PCI bridge to [bus 02] |
| 284 | [ 0.253709] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| 285 | [ 0.253739] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] |
| 286 | [ 0.253779] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| 287 | [ 0.253806] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| 288 | [ 0.253942] pci 0000:03:00.0: supports D1 D2 |
| 289 | [ 0.253946] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 290 | [ 0.263107] pci 0000:00:15.1: PCI bridge to [bus 03] |
| 291 | [ 0.263126] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| 292 | [ 0.263141] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| 293 | [ 0.263184] pci_bus 0000:00: on NUMA node 0 |
| 294 | [ 0.264181] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 295 | [ 0.264425] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 296 | [ 0.264596] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 297 | [ 0.264735] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 298 | [ 0.264833] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 299 | [ 0.265009] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0 |
| 300 | [ 0.265180] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 301 | [ 0.265354] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 302 | [ 0.265612] ACPI: Enabled 6 GPEs in block 00 to 1F |
| 303 | [ 0.266056] vgaarb: setting as boot device: PCI:0000:00:01.0 |
| 304 | [ 0.266066] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| 305 | [ 0.266078] vgaarb: loaded |
| 306 | [ 0.266081] vgaarb: bridge control possible 0000:00:01.0 |
| 307 | [ 0.266406] PCI: Using ACPI for IRQ routing |
| 308 | [ 0.266419] PCI: pci_cache_line_size set to 64 bytes |
| 309 | [ 0.266576] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 310 | [ 0.266582] e820: reserve RAM buffer [mem 0xc7c55000-0xc7ffffff] |
| 311 | [ 0.266585] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] |
| 312 | [ 0.267075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| 313 | [ 0.267083] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| 314 | [ 0.269244] Switched to clocksource hpet |
| 315 | [ 0.280495] pnp: PnP ACPI init |
| 316 | [ 0.280967] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 317 | [ 0.281303] pnp: PnP ACPI: found 1 devices |
| 318 | [ 0.281313] PnPBIOS: Disabled by ACPI PNP |
| 319 | [ 0.326117] pci 0000:00:14.4: PCI bridge to [bus 01] |
| 320 | [ 0.326143] pci 0000:00:15.0: PCI bridge to [bus 02] |
| 321 | [ 0.326161] pci 0000:00:15.1: PCI bridge to [bus 03] |
| 322 | [ 0.326167] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| 323 | [ 0.326180] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| 324 | [ 0.326191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 325 | [ 0.326196] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 326 | [ 0.326201] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 327 | [ 0.326205] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| 328 | [ 0.326210] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] |
| 329 | [ 0.326214] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] |
| 330 | [ 0.326218] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| 331 | [ 0.326222] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| 332 | [ 0.326227] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| 333 | [ 0.326231] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| 334 | [ 0.326402] NET: Registered protocol family 2 |
| 335 | [ 0.326799] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| 336 | [ 0.326851] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| 337 | [ 0.326888] TCP: Hash tables configured (established 8192 bind 8192) |
| 338 | [ 0.326938] TCP: reno registered |
| 339 | [ 0.326943] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| 340 | [ 0.326954] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| 341 | [ 0.327149] NET: Registered protocol family 1 |
| 342 | [ 0.327182] pci 0000:00:01.0: Video device with shadowed ROM |
| 343 | [ 0.383642] PCI: CLS 64 bytes, default 64 |
| 344 | [ 0.383765] Unpacking initramfs... |
| 345 | [ 1.108089] Freeing initrd memory: 18376K (f5c0c000 - f6dfe000) |
| 346 | [ 1.108821] microcode: CPU0: patch_level=0x05000119 |
| 347 | [ 1.108948] microcode: CPU1: patch_level=0x05000119 |
| 348 | [ 1.109353] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 349 | [ 1.109373] LVT offset 0 assigned for vector 0x400 |
| 350 | [ 1.109408] perf: AMD IBS detected (0x000000ff) |
| 351 | [ 1.110342] futex hash table entries: 512 (order: 3, 32768 bytes) |
| 352 | [ 1.110475] audit: initializing netlink subsys (disabled) |
| 353 | [ 1.110517] audit: type=2000 audit(1453574623.000:1): initialized |
| 354 | [ 1.111341] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 355 | [ 1.111385] zpool: loaded |
| 356 | [ 1.111691] VFS: Disk quotas dquot_6.5.2 |
| 357 | [ 1.111810] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| 358 | [ 1.113601] alg: No test for stdrng (krng) |
| 359 | [ 1.113661] bounce: pool size: 64 pages |
| 360 | [ 1.113793] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 361 | [ 1.113922] io scheduler noop registered |
| 362 | [ 1.113929] io scheduler deadline registered |
| 363 | [ 1.113952] io scheduler cfq registered (default) |
| 364 | [ 1.115212] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt |
| 365 | [ 1.115221] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded |
| 366 | [ 1.115257] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt |
| 367 | [ 1.115262] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| 368 | [ 1.115270] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded |
| 369 | [ 1.115287] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 370 | [ 1.115329] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 371 | [ 1.115443] GHES: Failed to enable APEI firmware first mode. |
| 372 | [ 1.115455] isapnp: ISA Plug & Play support disabled |
| 373 | [ 1.115806] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 374 | [ 1.136553] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 375 | [ 1.138129] Linux agpgart interface v0.103 |
| 376 | [ 1.138556] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| 377 | [ 1.142237] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 378 | [ 1.142258] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 379 | [ 1.143085] mousedev: PS/2 mouse device common for all mice |
| 380 | [ 1.143310] rtc_cmos 00:00: RTC can wake from S4 |
| 381 | [ 1.143763] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| 382 | [ 1.143883] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| 383 | [ 1.143924] ledtrig-cpu: registered to indicate activity on CPUs |
| 384 | [ 1.144259] TCP: cubic registered |
| 385 | [ 1.144429] NET: Registered protocol family 10 |
| 386 | [ 1.145039] mip6: Mobile IPv6 |
| 387 | [ 1.145053] NET: Registered protocol family 17 |
| 388 | [ 1.145063] mpls_gso: MPLS GSO support |
| 389 | [ 1.145678] Using IPI No-Shortcut mode |
| 390 | [ 1.146339] registered taskstats version 1 |
| 391 | [ 1.147224] rtc_cmos 00:00: setting system clock to 2016-01-23 18:43:43 UTC (1453574623) |
| 392 | [ 1.147327] PM: Hibernation image not present or could not be loaded. |
| 393 | [ 1.147906] Freeing unused kernel memory: 660K (c16bf000 - c1764000) |
| 394 | [ 1.148069] Write protecting the kernel text: 4832k |
| 395 | [ 1.148207] Write protecting the kernel read-only data: 1488k |
| 396 | [ 1.148209] NX-protecting the kernel data: 3360k |
| 397 | [ 1.292998] systemd-udevd[65]: starting version 215 |
| 398 | [ 1.294161] random: systemd-udevd urandom read with 0 bits of entropy available |
| 399 | [ 1.312746] ACPI: bus type USB registered |
| 400 | [ 1.312813] usbcore: registered new interface driver usbfs |
| 401 | [ 1.312839] usbcore: registered new interface driver hub |
| 402 | [ 1.319083] SCSI subsystem initialized |
| 403 | [ 1.320666] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 |
| 404 | [ 1.320791] sp5100_tco: PCI Revision ID: 0x42 |
| 405 | [ 1.320906] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address |
| 406 | [ 1.320920] sp5100_tco: Last reboot was not triggered by watchdog. |
| 407 | [ 1.321016] sp5100_tco: initialized (0xf8210b00). heartbeat=60 sec (nowayout=0) |
| 408 | [ 1.323309] usbcore: registered new device driver usb |
| 409 | [ 1.324321] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 410 | [ 1.324985] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 411 | [ 1.326901] libata version 3.00 loaded. |
| 412 | [ 1.328361] ahci 0000:00:11.0: version 3.0 |
| 413 | [ 1.328424] ehci-pci: EHCI PCI platform driver |
| 414 | [ 1.328970] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| 415 | [ 1.328978] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| 416 | [ 1.331990] scsi host0: ahci |
| 417 | [ 1.332180] scsi host1: ahci |
| 418 | [ 1.332972] scsi host2: ahci |
| 419 | [ 1.333204] scsi host3: ahci |
| 420 | [ 1.333492] scsi host4: ahci |
| 421 | [ 1.333732] scsi host5: ahci |
| 422 | [ 1.333928] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 |
| 423 | [ 1.333934] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 |
| 424 | [ 1.333938] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 |
| 425 | [ 1.333943] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 |
| 426 | [ 1.333948] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 |
| 427 | [ 1.333952] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 |
| 428 | [ 1.334562] QUIRK: Enable AMD PLL fix |
| 429 | [ 1.334685] ehci-pci 0000:00:12.2: EHCI Host Controller |
| 430 | [ 1.334701] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| 431 | [ 1.334721] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 432 | [ 1.334806] ehci-pci 0000:00:12.2: debug port 1 |
| 433 | [ 1.334880] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000 |
| 434 | [ 1.340933] thermal LNXTHERM:00: registered as thermal_zone0 |
| 435 | [ 1.340942] ACPI: Thermal Zone [TZ00] (33 C) |
| 436 | [ 1.345473] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| 437 | [ 1.345662] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 438 | [ 1.345672] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 439 | [ 1.345677] usb usb1: Product: EHCI Host Controller |
| 440 | [ 1.345681] usb usb1: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd |
| 441 | [ 1.345685] usb usb1: SerialNumber: 0000:00:12.2 |
| 442 | [ 1.346371] hub 1-0:1.0: USB hub found |
| 443 | [ 1.346390] hub 1-0:1.0: 5 ports detected |
| 444 | [ 1.347143] ehci-pci 0000:00:13.2: EHCI Host Controller |
| 445 | [ 1.347157] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| 446 | [ 1.347166] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 447 | [ 1.347183] ehci-pci 0000:00:13.2: debug port 1 |
| 448 | [ 1.347239] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000 |
| 449 | [ 1.349234] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| 450 | [ 1.350392] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8226000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26 |
| 451 | [ 1.350399] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| 452 | [ 1.357372] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| 453 | [ 1.357536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 454 | [ 1.357541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 455 | [ 1.357546] usb usb2: Product: EHCI Host Controller |
| 456 | [ 1.357551] usb usb2: Manufacturer: Linux 3.19.0-trunk-686-pae ehci_hcd |
| 457 | [ 1.357555] usb usb2: SerialNumber: 0000:00:13.2 |
| 458 | [ 1.357882] hub 2-0:1.0: USB hub found |
| 459 | [ 1.357900] hub 2-0:1.0: 5 ports detected |
| 460 | [ 1.358762] ohci-pci: OHCI PCI platform driver |
| 461 | [ 1.359147] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| 462 | [ 1.359162] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| 463 | [ 1.359224] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000 |
| 464 | [ 1.417763] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| 465 | [ 1.417773] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 466 | [ 1.417777] usb usb3: Product: OHCI PCI host controller |
| 467 | [ 1.417782] usb usb3: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd |
| 468 | [ 1.417786] usb usb3: SerialNumber: 0000:00:12.0 |
| 469 | [ 1.418396] hub 3-0:1.0: USB hub found |
| 470 | [ 1.418421] hub 3-0:1.0: 5 ports detected |
| 471 | [ 1.419062] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| 472 | [ 1.419076] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| 473 | [ 1.419124] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000 |
| 474 | [ 1.477702] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| 475 | [ 1.477711] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 476 | [ 1.477716] usb usb4: Product: OHCI PCI host controller |
| 477 | [ 1.477721] usb usb4: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd |
| 478 | [ 1.477725] usb usb4: SerialNumber: 0000:00:13.0 |
| 479 | [ 1.478343] hub 4-0:1.0: USB hub found |
| 480 | [ 1.478377] hub 4-0:1.0: 5 ports detected |
| 481 | [ 1.479040] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| 482 | [ 1.479053] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| 483 | [ 1.479102] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000 |
| 484 | [ 1.537697] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| 485 | [ 1.537707] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 486 | [ 1.537712] usb usb5: Product: OHCI PCI host controller |
| 487 | [ 1.537716] usb usb5: Manufacturer: Linux 3.19.0-trunk-686-pae ohci_hcd |
| 488 | [ 1.537720] usb usb5: SerialNumber: 0000:00:14.5 |
| 489 | [ 1.538335] hub 5-0:1.0: USB hub found |
| 490 | [ 1.538360] hub 5-0:1.0: 2 ports detected |
| 491 | [ 1.653674] ata6: SATA link down (SStatus 0 SControl 300) |
| 492 | [ 1.653726] ata3: SATA link down (SStatus 0 SControl 300) |
| 493 | [ 1.653769] ata5: SATA link down (SStatus 0 SControl 300) |
| 494 | [ 1.653800] ata1: SATA link down (SStatus 0 SControl 300) |
| 495 | [ 1.653831] ata2: SATA link down (SStatus 0 SControl 300) |
| 496 | [ 1.669668] usb 2-2: new high-speed USB device number 2 using ehci-pci |
| 497 | [ 1.819485] usb 2-2: New USB device found, idVendor=148f, idProduct=2870 |
| 498 | [ 1.819497] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 499 | [ 1.819501] usb 2-2: Product: 802.11 n WLAN |
| 500 | [ 1.819506] usb 2-2: Manufacturer: Ralink |
| 501 | [ 1.825461] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 502 | [ 1.831622] ata4.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100 |
| 503 | [ 1.831633] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| 504 | [ 1.838411] ata4.00: configured for UDMA/100 |
| 505 | [ 1.838903] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 |
| 506 | [ 1.847599] sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) |
| 507 | [ 1.847608] sd 3:0:0:0: [sda] 4096-byte physical blocks |
| 508 | [ 1.847709] sd 3:0:0:0: [sda] Write Protect is off |
| 509 | [ 1.847715] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 510 | [ 1.847759] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 511 | [ 1.858640] sda: sda1 sda2 |
| 512 | [ 1.859828] sd 3:0:0:0: [sda] Attached SCSI disk |
| 513 | [ 1.861010] sd 3:0:0:0: Attached scsi generic sg0 type 0 |
| 514 | [ 1.861348] usb 3-1: new low-speed USB device number 2 using ohci-pci |
| 515 | [ 2.032785] usb 3-1: New USB device found, idVendor=046d, idProduct=c312 |
| 516 | [ 2.032802] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 517 | [ 2.032811] usb 3-1: Product: USB Multimedia Keyboard |
| 518 | [ 2.032819] usb 3-1: Manufacturer: LITEON Technology |
| 519 | [ 2.037359] hidraw: raw HID events driver (C) Jiri Kosina |
| 520 | [ 2.044119] usbcore: registered new interface driver usbhid |
| 521 | [ 2.044126] usbhid: USB HID core driver |
| 522 | [ 2.046391] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:046D:C312.0001/input/input2 |
| 523 | [ 2.101931] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-1/input0 |
| 524 | [ 2.105629] tsc: Refined TSC clocksource calibration: 1599.999 MHz |
| 525 | [ 2.162526] md: bind<sda2> |
| 526 | [ 2.166844] md: raid1 personality registered for level 1 |
| 527 | [ 2.167708] md/raid1:md1: active with 1 out of 2 mirrors |
| 528 | [ 2.167766] md1: detected capacity change from 0 to 1999886286848 |
| 529 | [ 2.168888] md1: unknown partition table |
| 530 | [ 2.169118] md: bind<sda1> |
| 531 | [ 2.172913] md/raid1:md0: active with 1 out of 2 mirrors |
| 532 | [ 2.172970] md0: detected capacity change from 0 to 509804544 |
| 533 | [ 2.174001] md0: unknown partition table |
| 534 | [ 2.281296] device-mapper: uevent: version 1.0.3 |
| 535 | [ 2.281545] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com |
| 536 | [ 2.297451] usb 3-2: new full-speed USB device number 3 using ohci-pci |
| 537 | [ 2.462788] usb 3-2: New USB device found, idVendor=1b1a, idProduct=7001 |
| 538 | [ 2.462804] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| 539 | [ 2.462813] usb 3-2: Product: USB Mouse |
| 540 | [ 2.469549] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1B1A:7001.0002/input/input3 |
| 541 | [ 2.469735] hid-generic 0003:1B1A:7001.0002: input,hidraw1: USB HID v1.10 Mouse [ USB Mouse ] on usb-0000:00:12.0-2/input0 |
| 542 | [ 2.475000] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:1B1A:7001.0003/input/input4 |
| 543 | [ 2.530037] hid-generic 0003:1B1A:7001.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB Mouse ] on usb-0000:00:12.0-2/input1 |
| 544 | [ 3.105950] Switched to clocksource tsc |
| 545 | [ 6.708985] random: nonblocking pool is initialized |
| 546 | [ 13.983244] NET: Registered protocol family 38 |
| 547 | [ 15.741268] raid6: mmxx1 622 MB/s |
| 548 | [ 15.809273] raid6: mmxx2 1041 MB/s |
| 549 | [ 15.877331] raid6: sse1x1 621 MB/s |
| 550 | [ 15.945249] raid6: sse1x2 1012 MB/s |
| 551 | [ 16.013256] raid6: sse2x1 1061 MB/s |
| 552 | [ 16.081242] raid6: sse2x2 1479 MB/s |
| 553 | [ 16.081245] raid6: using algorithm sse2x2 (1479 MB/s) |
| 554 | [ 16.081249] raid6: using ssse3x1 recovery algorithm |
| 555 | [ 16.081923] xor: measuring software checksum speed |
| 556 | [ 16.121233] pIII_sse : 3226.000 MB/sec |
| 557 | [ 16.161233] prefetch64-sse: 3451.000 MB/sec |
| 558 | [ 16.161236] xor: using function: prefetch64-sse (3451.000 MB/sec) |
| 559 | [ 16.293799] Btrfs loaded |
| 560 | [ 17.234783] PM: Starting manual resume from disk |
| 561 | [ 17.234797] PM: Hibernation image partition 253:2 present |
| 562 | [ 17.234800] PM: Looking for hibernation image. |
| 563 | [ 17.235416] PM: Image not found (code -22) |
| 564 | [ 17.235429] PM: Hibernation image not present or could not be loaded. |
| 565 | [ 18.024619] EXT4-fs (dm-1): mounting ext3 file system using the ext4 subsystem |
| 566 | [ 18.060432] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| 567 | [ 19.241745] EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem |
| 568 | [ 19.316404] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) |
| 569 | [ 21.313018] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) |
| 570 | [ 21.313411] systemd[1]: Detected architecture x86. |
| 571 | [ 21.325616] systemd[1]: Set hostname to <mattotaupa>. |
| 572 | [ 23.324783] systemd[1]: rpcbind.target: Dependency Before=rpcbind.target dropped |
| 573 | [ 23.716133] systemd[1]: Listening on Syslog Socket. |
| 574 | [ 23.716310] systemd[1]: Reached target User and Group Name Lookups. |
| 575 | [ 23.716406] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 576 | [ 23.716508] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 577 | [ 23.716584] systemd[1]: Listening on udev Control Socket. |
| 578 | [ 23.716863] systemd[1]: Created slice User and Session Slice. |
| 579 | [ 23.716960] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 580 | [ 23.717056] systemd[1]: Listening on LVM2 metadata daemon socket. |
| 581 | [ 23.717118] systemd[1]: Listening on LVM2 poll daemon socket. |
| 582 | [ 23.717187] systemd[1]: Listening on udev Kernel Socket. |
| 583 | [ 23.718325] systemd[1]: Unmounting /usr... |
| 584 | [ 23.718581] systemd[1]: Listening on Journal Socket (/dev/log). |
| 585 | [ 23.718728] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| 586 | [ 23.719198] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 587 | [ 23.719419] systemd[1]: Listening on Journal Audit Socket. |
| 588 | [ 23.719466] systemd[1]: Reached target Remote File Systems (Pre). |
| 589 | [ 23.719527] systemd[1]: Reached target Remote File Systems. |
| 590 | [ 24.045295] systemd[1]: usr.mount: Mount process exited, code=exited status=32 |
| 591 | [ 24.045338] systemd[1]: Failed unmounting /usr. |
| 592 | [ 24.050765] systemd[1]: Created slice System Slice. |
| 593 | [ 24.051485] systemd[1]: Created slice system-tor.slice. |
| 594 | [ 24.051885] systemd[1]: Reached target Slices. |
| 595 | [ 24.052427] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| 596 | [ 24.052967] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| 597 | [ 24.053562] systemd[1]: Created slice system-getty.slice. |
| 598 | [ 24.053942] systemd[1]: Stopped File System Check on /dev/mapper/speicher-usr. |
| 599 | [ 24.054481] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| 600 | [ 24.054928] systemd[1]: Listening on fsck to fsckd communication Socket. |
| 601 | [ 24.055384] systemd[1]: Listening on Journal Socket. |
| 602 | [ 24.056822] systemd[1]: Mounting POSIX Message Queue File System... |
| 603 | [ 24.059218] systemd[1]: Mounting Huge Pages File System... |
| 604 | [ 24.060986] systemd[1]: Mounting Debug File System... |
| 605 | [ 24.187987] systemd[1]: Starting Load Kernel Modules... |
| 606 | [ 24.263237] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. |
| 607 | [ 24.264484] systemd[1]: Mounting Temporary Directory... |
| 608 | [ 24.266278] systemd[1]: Starting LSB: setup for pidentd... |
| 609 | [ 24.268010] systemd[1]: Starting LSB: Set keymap... |
| 610 | [ 24.269885] systemd[1]: Starting LSB: Set console font and keymap... |
| 611 | [ 24.337511] systemd[1]: Starting Journal Service... |
| 612 | [ 24.339227] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... |
| 613 | [ 24.341104] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 614 | [ 24.343495] systemd[1]: Mounted Debug File System. |
| 615 | [ 24.344009] systemd[1]: Mounted Huge Pages File System. |
| 616 | [ 24.344408] systemd[1]: Mounted POSIX Message Queue File System. |
| 617 | [ 24.344826] systemd[1]: Mounted Temporary Directory. |
| 618 | [ 24.722839] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| 619 | [ 24.725046] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 620 | [ 25.335427] loop: module loaded |
| 621 | [ 25.424795] systemd[1]: Started LSB: Set keymap. |
| 622 | [ 25.584820] nct6775: Found NCT6775F or compatible chip at 0x2e:0x290 |
| 623 | [ 25.587352] systemd[1]: Started Load Kernel Modules. |
| 624 | [ 25.589657] systemd[1]: Starting Apply Kernel Variables... |
| 625 | [ 25.606642] systemd[1]: Started LVM2 metadata daemon. |
| 626 | [ 25.860335] systemd[1]: Started LSB: setup for pidentd. |
| 627 | [ 25.901889] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required. |
| 628 | [ 25.903627] systemd[1]: Started Apply Kernel Variables. |
| 629 | [ 26.019635] systemd[1]: Started Create Static Device Nodes in /dev. |
| 630 | [ 26.021496] systemd[1]: Starting udev Kernel Device Manager... |
| 631 | [ 26.067646] systemd[1]: Started Journal Service. |
| 632 | [ 29.185177] EXT4-fs (dm-3): re-mounted. Opts: (null) |
| 633 | [ 29.185196] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| 634 | [ 29.756691] ACPI: acpi_idle registered with cpuidle |
| 635 | [ 29.821658] acpi-cpufreq: overriding BIOS provided _PSD data |
| 636 | [ 29.957373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 |
| 637 | [ 29.957388] ACPI: Power Button [PWRB] |
| 638 | [ 29.957501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| 639 | [ 29.957507] ACPI: Power Button [PWRF] |
| 640 | [ 30.191410] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 641 | [ 30.318154] piix4_smbus 0000:00:14.0: SMBus base address index region 0xcd6 already in use! |
| 642 | [ 30.326776] piix4_smbus: probe of 0000:00:14.0 failed with error -16 |
| 643 | [ 30.417440] r8169 0000:03:00.0 eth6: renamed from eth0 |
| 644 | [ 30.659626] [drm] Initialized drm 1.1.0 20060810 |
| 645 | [ 31.429050] [drm] radeon kernel modesetting enabled. |
| 646 | [ 31.561815] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802). |
| 647 | [ 31.561874] [drm] register mmio base: 0xF0100000 |
| 648 | [ 31.561880] [drm] register mmio size: 262144 |
| 649 | [ 31.562027] ATOM BIOS: AMD |
| 650 | [ 31.562139] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| 651 | [ 31.562150] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| 652 | [ 31.562158] [drm] Detected VRAM RAM=384M, BAR=256M |
| 653 | [ 31.562164] [drm] RAM width 32bits DDR |
| 654 | [ 31.562323] [TTM] Zone kernel: Available graphics memory: 411094 kiB |
| 655 | [ 31.562329] [TTM] Zone highmem: Available graphics memory: 3943044 kiB |
| 656 | [ 31.562334] [TTM] Initializing pool allocator |
| 657 | [ 31.562355] [TTM] Initializing DMA pool allocator |
| 658 | [ 31.562428] [drm] radeon: 384M of VRAM memory ready |
| 659 | [ 31.562436] [drm] radeon: 1024M of GTT memory ready. |
| 660 | [ 31.562477] [drm] Loading PALM Microcode |
| 661 | [ 31.580675] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8 |
| 662 | [ 31.755469] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| 663 | [ 31.756140] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| 664 | [ 31.756157] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 665 | [ 31.756167] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| 666 | [ 31.756175] sound hdaudioC1D0: mono: mono_out=0x0 |
| 667 | [ 31.756183] sound hdaudioC1D0: dig-out=0x1e/0x0 |
| 668 | [ 31.756190] sound hdaudioC1D0: inputs: |
| 669 | [ 31.756200] sound hdaudioC1D0: Rear Mic=0x18 |
| 670 | [ 31.756208] sound hdaudioC1D0: Front Mic=0x19 |
| 671 | [ 31.756216] sound hdaudioC1D0: Line=0x1a |
| 672 | [ 31.756223] sound hdaudioC1D0: CD=0x1c |
| 673 | [ 31.781797] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input9 |
| 674 | [ 31.785630] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| 675 | [ 31.785710] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| 676 | [ 31.785788] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| 677 | [ 31.785859] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 |
| 678 | [ 31.785932] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 |
| 679 | [ 31.786002] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15 |
| 680 | [ 31.786075] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input16 |
| 681 | [ 31.786148] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17 |
| 682 | [ 31.944856] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin |
| 683 | [ 31.954666] kvm: Nested Virtualization enabled |
| 684 | [ 31.954678] kvm: Nested Paging enabled |
| 685 | [ 31.981864] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin |
| 686 | [ 32.078276] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin |
| 687 | [ 32.078311] [drm] Internal thermal controller without fan control |
| 688 | [ 32.078504] == power state 0 == |
| 689 | [ 32.078511] ui class: none |
| 690 | [ 32.078518] internal class: uvd_hd |
| 691 | [ 32.078524] caps: |
| 692 | [ 32.078531] uvd vclk: 40000 dclk: 30477 |
| 693 | [ 32.078538] power level 0 sclk: 27827 vddc: 850 |
| 694 | [ 32.078542] status: |
| 695 | [ 32.078547] == power state 1 == |
| 696 | [ 32.078551] ui class: none |
| 697 | [ 32.078555] internal class: uvd |
| 698 | [ 32.078561] caps: |
| 699 | [ 32.078566] uvd vclk: 53334 dclk: 40000 |
| 700 | [ 32.078572] power level 0 sclk: 49231 vddc: 925 |
| 701 | [ 32.078575] status: |
| 702 | [ 32.078580] == power state 2 == |
| 703 | [ 32.078583] ui class: performance |
| 704 | [ 32.078588] internal class: none |
| 705 | [ 32.078593] caps: |
| 706 | [ 32.078598] uvd vclk: 0 dclk: 0 |
| 707 | [ 32.078603] power level 0 sclk: 27827 vddc: 850 |
| 708 | [ 32.078608] power level 1 sclk: 49231 vddc: 925 |
| 709 | [ 32.078612] status: |
| 710 | [ 32.078616] == power state 3 == |
| 711 | [ 32.078620] ui class: none |
| 712 | [ 32.078624] internal class: boot |
| 713 | [ 32.078630] caps: |
| 714 | [ 32.078635] uvd vclk: 0 dclk: 0 |
| 715 | [ 32.078639] power level 0 sclk: 20000 vddc: 925 |
| 716 | [ 32.078643] status: c r b |
| 717 | [ 32.078651] == power state 4 == |
| 718 | [ 32.078654] ui class: none |
| 719 | [ 32.078658] internal class: thermal |
| 720 | [ 32.078664] caps: |
| 721 | [ 32.078669] uvd vclk: 0 dclk: 0 |
| 722 | [ 32.078674] power level 0 sclk: 17778 vddc: 850 |
| 723 | [ 32.078677] status: |
| 724 | [ 32.078685] [drm] Found smc ucode version: 0x00010601 |
| 725 | [ 32.078814] [drm] radeon: dpm initialized |
| 726 | [ 32.322963] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin |
| 727 | [ 32.323111] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| 728 | [ 32.341028] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). |
| 729 | [ 32.341302] radeon 0000:00:01.0: WB enabled |
| 730 | [ 32.341309] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffb7ec00 |
| 731 | [ 32.341315] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffb7ec0c |
| 732 | [ 32.343316] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8cb2118 |
| 733 | [ 32.343322] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 734 | [ 32.343324] [drm] Driver supports precise vblank timestamp query. |
| 735 | [ 32.343328] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| 736 | [ 32.343386] radeon 0000:00:01.0: radeon: using MSI. |
| 737 | [ 32.343426] [drm] radeon: irq initialized. |
| 738 | [ 32.359942] [drm] ring test on 0 succeeded in 1 usecs |
| 739 | [ 32.359954] [drm] ring test on 3 succeeded in 3 usecs |
| 740 | [ 32.406392] [drm] ring test on 5 succeeded in 1 usecs |
| 741 | [ 32.426413] [drm] UVD initialized successfully. |
| 742 | [ 32.426896] [drm] ib test on ring 0 succeeded in 0 usecs |
| 743 | [ 32.426948] [drm] ib test on ring 3 succeeded in 0 usecs |
| 744 | [ 32.945666] [drm] ib test on ring 5 succeeded |
| 745 | [ 32.970163] [drm] Radeon Display Connectors |
| 746 | [ 32.970176] [drm] Connector 0: |
| 747 | [ 32.970182] [drm] HDMI-A-1 |
| 748 | [ 32.970187] [drm] HPD1 |
| 749 | [ 32.970196] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| 750 | [ 32.970200] [drm] Encoders: |
| 751 | [ 32.970206] [drm] DFP1: INTERNAL_UNIPHY |
| 752 | [ 32.970211] [drm] Connector 1: |
| 753 | [ 32.970215] [drm] HDMI-A-2 |
| 754 | [ 32.970219] [drm] HPD2 |
| 755 | [ 32.970226] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| 756 | [ 32.970230] [drm] Encoders: |
| 757 | [ 32.970234] [drm] DFP2: INTERNAL_UNIPHY |
| 758 | [ 32.970239] [drm] Connector 2: |
| 759 | [ 32.970243] [drm] VGA-1 |
| 760 | [ 32.970250] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| 761 | [ 32.970254] [drm] Encoders: |
| 762 | [ 32.970259] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| 763 | [ 32.970368] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 |
| 764 | [ 32.970383] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 |
| 765 | [ 32.970393] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 |
| 766 | [ 32.970453] switching from power state: |
| 767 | [ 32.970459] ui class: none |
| 768 | [ 32.970465] internal class: boot |
| 769 | [ 32.970472] caps: |
| 770 | [ 32.970478] uvd vclk: 0 dclk: 0 |
| 771 | [ 32.970484] power level 0 sclk: 20000 vddc: 925 |
| 772 | [ 32.970488] status: c b |
| 773 | [ 32.970495] switching to power state: |
| 774 | [ 32.970499] ui class: performance |
| 775 | [ 32.970504] internal class: none |
| 776 | [ 32.970509] caps: |
| 777 | [ 32.970514] uvd vclk: 0 dclk: 0 |
| 778 | [ 32.970520] power level 0 sclk: 27827 vddc: 850 |
| 779 | [ 32.970525] power level 1 sclk: 49231 vddc: 925 |
| 780 | [ 32.970528] status: r |
| 781 | [ 32.970642] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] |
| 782 | [ 32.971792] [drm:radeon_atombios_connected_scratch_regs] DFP1 disconnected |
| 783 | [ 32.971802] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] disconnected |
| 784 | [ 32.971810] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-2] |
| 785 | [ 32.972923] [drm:radeon_atombios_connected_scratch_regs] DFP2 disconnected |
| 786 | [ 32.972931] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:HDMI-A-2] disconnected |
| 787 | [ 32.972937] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:VGA-1] |
| 788 | [ 33.004809] [drm:radeon_atombios_connected_scratch_regs] CRT1 connected |
| 789 | [ 33.004858] [drm:drm_edid_to_eld] ELD: no CEA Extension found |
| 790 | [ 33.004882] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:VGA-1] probed modes : |
| 791 | [ 33.004889] [drm:drm_mode_debug_printmodeline] Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 |
| 792 | [ 33.004895] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 |
| 793 | [ 33.004901] [drm:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 |
| 794 | [ 33.004906] [drm:drm_mode_debug_printmodeline] Modeline 30:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 |
| 795 | [ 33.004912] [drm:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa |
| 796 | [ 33.004918] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa |
| 797 | [ 33.004923] [drm:drm_mode_debug_printmodeline] Modeline 42:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa |
| 798 | [ 33.004928] [drm:drm_mode_debug_printmodeline] Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 |
| 799 | [ 33.004934] [drm:drm_mode_debug_printmodeline] Modeline 44:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 |
| 800 | [ 33.004939] [drm:drm_mode_debug_printmodeline] Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 |
| 801 | [ 33.004944] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 |
| 802 | [ 33.004949] [drm:drm_mode_debug_printmodeline] Modeline 33:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa |
| 803 | [ 33.004955] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa |
| 804 | [ 33.004960] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa |
| 805 | [ 33.004965] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa |
| 806 | [ 33.004971] [drm:drm_mode_debug_printmodeline] Modeline 29:"720x405" 70 26483 720 736 808 896 405 406 409 422 0x0 0x6 |
| 807 | [ 33.004976] [drm:drm_mode_debug_printmodeline] Modeline 37:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 |
| 808 | [ 33.004982] [drm:drm_mode_debug_printmodeline] Modeline 28:"640x400" 70 23354 640 656 720 800 400 401 404 417 0x0 0x6 |
| 809 | [ 33.004987] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x360" 70 20604 640 648 712 784 360 361 364 375 0x0 0x6 |
| 810 | [ 33.004990] [drm:drm_setup_crtcs] |
| 811 | [ 33.004995] [drm:drm_enable_connectors] connector 20 enabled? no |
| 812 | [ 33.004998] [drm:drm_enable_connectors] connector 22 enabled? no |
| 813 | [ 33.005001] [drm:drm_enable_connectors] connector 24 enabled? yes |
| 814 | [ 33.005005] [drm:drm_target_preferred] looking for cmdline mode on connector 24 |
| 815 | [ 33.005009] [drm:drm_target_preferred] looking for preferred mode on connector 24 0 |
| 816 | [ 33.005012] [drm:drm_target_preferred] found mode 1280x1024 |
| 817 | [ 33.005016] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config |
| 818 | [ 33.005021] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 16 (0,0) |
| 819 | [ 33.009130] [drm] fb mappable at 0xE0478000 |
| 820 | [ 33.009133] [drm] vram apper at 0xE0000000 |
| 821 | [ 33.009136] [drm] size 5242880 |
| 822 | [ 33.009138] [drm] fb depth is 24 |
| 823 | [ 33.009140] [drm] pitch is 5120 |
| 824 | [ 33.009493] fbcon: radeondrmfb (fb0) is primary device |
| 825 | [ 33.010148] [drm:drm_crtc_helper_set_config] |
| 826 | [ 33.010152] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 827 | [ 33.010159] [drm:drm_crtc_helper_set_config] crtc has no fb, full mode set |
| 828 | [ 33.010162] [drm:drm_crtc_helper_set_config] modes are different, full mode set |
| 829 | [ 33.010168] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 |
| 830 | [ 33.010173] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 |
| 831 | [ 33.010177] [drm:drm_crtc_helper_set_config] encoder changed, full mode switch |
| 832 | [ 33.010179] [drm:drm_crtc_helper_set_config] crtc changed, full mode switch |
| 833 | [ 33.010182] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 834 | [ 33.010185] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace |
| 835 | [ 33.010190] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 |
| 836 | [ 33.010200] [drm:radeon_encoder_set_active_device] setting active device to 00000001 from 00000001 00000001 for encoder 4 |
| 837 | [ 33.010219] [drm:drm_crtc_helper_set_mode] [CRTC:16] |
| 838 | [ 33.010239] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 |
| 839 | [ 33.010249] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 |
| 840 | [ 33.010302] [drm:radeon_compute_pll_avivo] 135000 - 135000, pll dividers - fb: 21.6 ref: 2, post 8 |
| 841 | [ 33.025850] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) |
| 842 | [ 33.025897] [drm:drm_crtc_helper_set_mode] [ENCODER:23:TV-23] set [MODE:45:1280x1024] |
| 843 | [ 33.025902] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000001 |
| 844 | [ 33.025968] [drm:dce4_crtc_load_lut] 0 |
| 845 | [ 33.039289] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 0, devices 00000001, active_devices 00000001 |
| 846 | [ 33.039506] [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on |
| 847 | [ 33.039509] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] set DPMS on |
| 848 | [ 33.039515] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 |
| 849 | [ 33.039524] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 |
| 850 | [ 33.039609] [drm:drm_crtc_helper_set_config] |
| 851 | [ 33.039611] [drm:drm_crtc_helper_set_config] [CRTC:18] [NOFB] |
| 852 | [ 33.039614] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 |
| 853 | [ 33.039619] [drm:radeon_atom_encoder_dpms] encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 |
| 854 | [ 33.039689] [drm:drm_crtc_helper_set_config] |
| 855 | [ 33.039693] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 856 | [ 33.039704] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 857 | [ 33.039711] [drm:dce4_crtc_load_lut] 0 |
| 858 | [ 33.039750] [drm:dce4_crtc_load_lut] 0 |
| 859 | [ 33.054028] Console: switching to colour frame buffer device 160x64 |
| 860 | [ 33.054065] [drm:drm_crtc_helper_set_config] |
| 861 | [ 33.054071] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 862 | [ 33.054090] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 863 | [ 33.054103] [drm:dce4_crtc_load_lut] 0 |
| 864 | [ 33.054154] [drm:dce4_crtc_load_lut] 0 |
| 865 | [ 33.076119] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| 866 | [ 33.076128] radeon 0000:00:01.0: registered panic notifier |
| 867 | [ 33.101668] [drm:radeon_acpi_init] Call to ATCS verify_interface failed: -5 |
| 868 | [ 33.101689] [drm:radeon_acpi_init] Call to ATIF verify_interface failed: -5 |
| 869 | [ 33.101706] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0 |
| 870 | [ 34.562363] Adding 4194300k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194300k FS |
| 871 | [ 37.184024] SGI XFS with ACLs, security attributes, realtime, no debug enabled |
| 872 | [ 37.449205] XFS (dm-8): Mounting V4 Filesystem |
| 873 | [ 37.499601] XFS (dm-7): Mounting V4 Filesystem |
| 874 | [ 37.778845] cfg80211: Calling CRDA to update world regulatory domain |
| 875 | [ 38.365708] usb 2-2: reset high-speed USB device number 2 using ehci-pci |
| 876 | [ 38.507837] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected |
| 877 | [ 38.562752] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected |
| 878 | [ 39.077915] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 879 | [ 39.078623] usbcore: registered new interface driver rt2800usb |
| 880 | [ 40.521635] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem |
| 881 | [ 40.856120] XFS (dm-8): Ending clean mount |
| 882 | [ 41.393779] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) |
| 883 | [ 41.412675] EXT4-fs (dm-4): mounting ext3 file system using the ext4 subsystem |
| 884 | [ 41.638397] XFS (dm-7): Ending clean mount |
| 885 | [ 41.951569] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) |
| 886 | [ 42.651294] systemd-journald[339]: Received request to flush runtime journal from PID 1 |
| 887 | [ 133.478710] EXT4-fs (dm-6): mounting ext3 file system using the ext4 subsystem |
| 888 | [ 133.737527] EXT4-fs (dm-6): warning: maximal mount count reached, running e2fsck is recommended |
| 889 | [ 133.984112] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) |
| 890 | [ 163.905513] Process accounting resumed |
| 891 | [ 170.077246] [drm:drm_crtc_helper_set_config] |
| 892 | [ 170.077253] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 893 | [ 170.077275] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 894 | [ 170.077288] [drm:dce4_crtc_load_lut] 0 |
| 895 | [ 170.077339] [drm:dce4_crtc_load_lut] 0 |
| 896 | [ 184.800376] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 897 | [ 184.930917] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw |
| 898 | [ 185.069318] r8169 0000:03:00.0 eth6: link down |
| 899 | [ 185.069469] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 900 | [ 185.082686] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 901 | [ 185.082815] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' |
| 902 | [ 185.122389] rt2800usb 2-2:1.0: firmware: direct-loading firmware rt2870.bin |
| 903 | [ 185.122414] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 |
| 904 | [ 185.349057] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 905 | [ 191.289792] ip_tables: (C) 2000-2006 Netfilter Core Team |
| 906 | [ 191.310665] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| 907 | [ 191.543141] Ebtables v2.0 registered |
| 908 | [ 256.557796] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 909 | [ 256.773209] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 910 | [ 256.781966] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 911 | [ 256.937142] r8169 0000:03:00.0 eth6: link down |
| 912 | [ 256.937291] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 913 | [ 347.063283] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 914 | [ 347.281200] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 915 | [ 347.289174] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 916 | [ 347.445090] r8169 0000:03:00.0 eth6: link down |
| 917 | [ 347.445236] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 918 | [ 440.800902] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 919 | [ 440.961184] r8169 0000:03:00.0 eth6: link down |
| 920 | [ 440.961378] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 921 | [ 440.974997] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 922 | [ 441.193125] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 923 | [ 497.685011] [drm:drm_crtc_helper_set_config] |
| 924 | [ 497.685021] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 925 | [ 497.685045] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 926 | [ 497.685059] [drm:dce4_crtc_load_lut] 0 |
| 927 | [ 497.685111] [drm:dce4_crtc_load_lut] 0 |
| 928 | [ 498.245007] [drm:drm_crtc_helper_set_config] |
| 929 | [ 498.245017] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 930 | [ 498.245039] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 931 | [ 498.245053] [drm:dce4_crtc_load_lut] 0 |
| 932 | [ 498.245106] [drm:dce4_crtc_load_lut] 0 |
| 933 | [ 498.612990] [drm:drm_crtc_helper_set_config] |
| 934 | [ 498.613000] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 935 | [ 498.613023] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 936 | [ 498.613037] [drm:dce4_crtc_load_lut] 0 |
| 937 | [ 498.613090] [drm:dce4_crtc_load_lut] 0 |
| 938 | [ 498.901005] [drm:drm_crtc_helper_set_config] |
| 939 | [ 498.901015] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 940 | [ 498.901038] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 941 | [ 498.901052] [drm:dce4_crtc_load_lut] 0 |
| 942 | [ 498.901105] [drm:dce4_crtc_load_lut] 0 |
| 943 | [ 501.140988] [drm:drm_crtc_helper_set_config] |
| 944 | [ 501.140997] [drm:drm_crtc_helper_set_config] [CRTC:16] [FB:46] #connectors=1 (x y) (0 0) |
| 945 | [ 501.141021] [drm:drm_crtc_helper_set_config] [CONNECTOR:24:VGA-1] to [CRTC:16] |
| 946 | [ 501.141034] [drm:dce4_crtc_load_lut] 0 |
| 947 | [ 501.141087] [drm:dce4_crtc_load_lut] 0 |
| 948 | [ 531.560083] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 949 | [ 531.713288] r8169 0000:03:00.0 eth6: link down |
| 950 | [ 531.713465] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 951 | [ 531.729863] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 952 | [ 531.953228] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 953 | [ 622.304173] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 954 | [ 622.457293] r8169 0000:03:00.0 eth6: link down |
| 955 | [ 622.457477] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 956 | [ 622.472182] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 957 | [ 622.693552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 958 | [ 739.895387] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 959 | [ 740.048876] r8169 0000:03:00.0 eth6: link down |
| 960 | [ 740.049053] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 961 | [ 740.065195] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 962 | [ 740.293001] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 963 | [ 830.313950] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 964 | [ 830.468872] r8169 0000:03:00.0 eth6: link down |
| 965 | [ 830.469048] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready |
| 966 | [ 830.482618] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 967 | [ 830.697343] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |