Paul Menzel | 2628571 | 2017-04-17 10:57:51 +0200 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20) |
| 5 | [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7d4748f5-6bf2-44dd-a78c-7c82355091e1 ro quiet |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7fbdfff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000c7fbe000-0x00000000dfffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved |
| 13 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable |
| 14 | [ 0.000000] NX (Execute Disable) protection: active |
| 15 | [ 0.000000] SMBIOS 2.7 present. |
| 16 | [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.0-7057-g9ebb3f5 10/17/2014 |
| 17 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 18 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 19 | [ 0.000000] AGP: No AGP bridge found |
| 20 | [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 |
| 21 | [ 0.000000] MTRR default type: uncachable |
| 22 | [ 0.000000] MTRR fixed ranges enabled: |
| 23 | [ 0.000000] 00000-9FFFF write-back |
| 24 | [ 0.000000] A0000-BFFFF uncachable |
| 25 | [ 0.000000] C0000-FFFFF write-back |
| 26 | [ 0.000000] MTRR variable ranges enabled: |
| 27 | [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| 28 | [ 0.000000] 1 base 080000000 mask FC0000000 write-back |
| 29 | [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back |
| 30 | [ 0.000000] 3 disabled |
| 31 | [ 0.000000] 4 disabled |
| 32 | [ 0.000000] 5 disabled |
| 33 | [ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect |
| 34 | [ 0.000000] 7 disabled |
| 35 | [ 0.000000] TOM2: 000000021f000000 aka 8688M |
| 36 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 37 | [ 0.000000] e820: last_pfn = 0xc7fbe max_arch_pfn = 0x400000000 |
| 38 | [ 0.000000] found SMP MP-table at [mem 0x000f4040-0x000f404f] mapped at [ffff8800000f4040] |
| 39 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 40 | [ 0.000000] Using GB pages for direct mapping |
| 41 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 42 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 43 | [ 0.000000] BRK [0x01af1000, 0x01af1fff] PGTABLE |
| 44 | [ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE |
| 45 | [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| 46 | [ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff] |
| 47 | [ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M |
| 48 | [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| 49 | [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff] |
| 50 | [ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M |
| 51 | [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff] |
| 52 | [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M |
| 53 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7fbdfff] |
| 54 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 55 | [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| 56 | [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G |
| 57 | [ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M |
| 58 | [ 0.000000] [mem 0xc7e00000-0xc7fbdfff] page 4k |
| 59 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] |
| 60 | [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G |
| 61 | [ 0.000000] RAMDISK: [mem 0x3626e000-0x3712efff] |
| 62 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 63 | [ 0.000000] ACPI: RSDP 0x00000000000F4020 000014 (v00 CORE ) |
| 64 | [ 0.000000] ACPI: RSDT 0x00000000C7FE2624 000040 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 65 | [ 0.000000] ACPI: FACP 0x00000000C7FE4D18 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| 66 | [ 0.000000] ACPI: DSDT 0x00000000C7FE26C8 00260E (v02 ASROCK COREBOOT 00010001 INTL 20140926) |
| 67 | [ 0.000000] ACPI: FACS 0x00000000C7FE4CD8 000040 |
| 68 | [ 0.000000] ACPI: HPET 0x00000000C7FE4E10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 69 | [ 0.000000] ACPI: APIC 0x00000000C7FE4E48 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 70 | [ 0.000000] ACPI: HEST 0x00000000C7FE4EA8 000028 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 71 | [ 0.000000] ACPI: SSDT 0x00000000C7FE4ED0 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| 72 | [ 0.000000] ACPI: SSDT 0x00000000C7FE6560 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| 73 | [ 0.000000] ACPI: SSDT 0x00000000C7FE6940 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 74 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 75 | [ 0.000000] No NUMA configuration found |
| 76 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] |
| 77 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff] |
| 78 | [ 0.000000] NODE_DATA [mem 0x21eff9000-0x21effdfff] |
| 79 | [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216c00000-ffff88021d7fffff] on node 0 |
| 80 | [ 0.000000] Zone ranges: |
| 81 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 82 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 83 | [ 0.000000] Normal [mem 0x100000000-0x21effffff] |
| 84 | [ 0.000000] Movable zone start for each node |
| 85 | [ 0.000000] Early memory node ranges |
| 86 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 87 | [ 0.000000] node 0: [mem 0x00100000-0xc7fbdfff] |
| 88 | [ 0.000000] node 0: [mem 0x100000000-0x21effffff] |
| 89 | [ 0.000000] On node 0 totalpages: 1994588 |
| 90 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 91 | [ 0.000000] DMA zone: 21 pages reserved |
| 92 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 93 | [ 0.000000] DMA32 zone: 11144 pages used for memmap |
| 94 | [ 0.000000] DMA32 zone: 815038 pages, LIFO batch:31 |
| 95 | [ 0.000000] Normal zone: 16072 pages used for memmap |
| 96 | [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31 |
| 97 | [ 0.000000] ACPI: PM-Timer IO Port: 0x808 |
| 98 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 99 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 100 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 101 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 102 | [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| 103 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 104 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| 105 | [ 0.000000] ACPI: IRQ0 used by override. |
| 106 | [ 0.000000] ACPI: IRQ2 used by override. |
| 107 | [ 0.000000] ACPI: IRQ9 used by override. |
| 108 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 109 | [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| 110 | [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| 111 | [ 0.000000] nr_irqs_gsi: 40 |
| 112 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 113 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 114 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 115 | [ 0.000000] PM: Registered nosave memory: [mem 0xc7fbe000-0xdfffffff] |
| 116 | [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| 117 | [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff] |
| 118 | [ 0.000000] PM: Registered nosave memory: [mem 0xf9000000-0xffffffff] |
| 119 | [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| 120 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 121 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| 122 | [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s85824 r8192 d20672 u1048576 |
| 123 | [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152 |
| 124 | [ 0.000000] pcpu-alloc: [0] 0 1 |
| 125 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1967295 |
| 126 | [ 0.000000] Policy zone: Normal |
| 127 | [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7d4748f5-6bf2-44dd-a78c-7c82355091e1 ro quiet |
| 128 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 129 | [ 0.000000] AGP: Checking aperture... |
| 130 | [ 0.000000] AGP: No AGP bridge found |
| 131 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 132 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 133 | [ 0.000000] Memory: 7774788K/7978352K available (5188K kernel code, 941K rwdata, 1824K rodata, 1196K init, 840K bss, 203564K reserved) |
| 134 | [ 0.000000] Hierarchical RCU implementation. |
| 135 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 136 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| 137 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| 138 | [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 |
| 139 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 140 | [ 0.000000] Console: colour VGA+ 80x25 |
| 141 | [ 0.000000] console [tty0] enabled |
| 142 | [ 0.000000] hpet clockevent registered |
| 143 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 144 | [ 0.000000] tsc: Detected 1599.998 MHz processor |
| 145 | [ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.99 BogoMIPS (lpj=6399992) |
| 146 | [ 0.000061] pid_max: default: 32768 minimum: 301 |
| 147 | [ 0.000082] ACPI: Core revision 20140424 |
| 148 | [ 0.006418] ACPI: All ACPI Tables successfully acquired |
| 149 | [ 0.006491] Security Framework initialized |
| 150 | [ 0.006515] AppArmor: AppArmor disabled by boot time parameter |
| 151 | [ 0.006518] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 152 | [ 0.007628] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 153 | [ 0.013745] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 154 | [ 0.016427] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 155 | [ 0.016453] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 156 | [ 0.017121] Initializing cgroup subsys memory |
| 157 | [ 0.017140] Initializing cgroup subsys devices |
| 158 | [ 0.017159] Initializing cgroup subsys freezer |
| 159 | [ 0.017166] Initializing cgroup subsys net_cls |
| 160 | [ 0.017178] Initializing cgroup subsys blkio |
| 161 | [ 0.017188] Initializing cgroup subsys perf_event |
| 162 | [ 0.017193] Initializing cgroup subsys net_prio |
| 163 | [ 0.017247] tseg: 0000000000 |
| 164 | [ 0.017260] CPU: Physical Processor ID: 0 |
| 165 | [ 0.017262] CPU: Processor Core ID: 0 |
| 166 | [ 0.017266] mce: CPU supports 6 MCE banks |
| 167 | [ 0.017285] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| 168 | Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| 169 | tlb_flushall_shift: 6 |
| 170 | [ 0.017494] Freeing SMP alternatives memory: 20K (ffffffff81a18000 - ffffffff81a1d000) |
| 171 | [ 0.019957] ftrace: allocating 21542 entries in 85 pages |
| 172 | [ 0.039708] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 173 | [ 0.079406] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00) |
| 174 | [ 0.184548] Performance Events: AMD PMU driver. |
| 175 | [ 0.184558] ... version: 0 |
| 176 | [ 0.184561] ... bit width: 48 |
| 177 | [ 0.184563] ... generic registers: 4 |
| 178 | [ 0.184566] ... value mask: 0000ffffffffffff |
| 179 | [ 0.184568] ... max period: 00007fffffffffff |
| 180 | [ 0.184570] ... fixed-purpose events: 0 |
| 181 | [ 0.184573] ... event mask: 000000000000000f |
| 182 | [ 0.188000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 183 | [ 0.188283] x86: Booting SMP configuration: |
| 184 | [ 0.188288] .... node #0, CPUs: #1 |
| 185 | [ 0.201503] x86: Booted up 1 node, 2 CPUs |
| 186 | [ 0.201508] smpboot: Total of 2 processors activated (6399.99 BogoMIPS) |
| 187 | [ 0.202431] devtmpfs: initialized |
| 188 | [ 0.213204] pinctrl core: initialized pinctrl subsystem |
| 189 | [ 0.213443] NET: Registered protocol family 16 |
| 190 | [ 0.213773] cpuidle: using governor ladder |
| 191 | [ 0.213779] cpuidle: using governor menu |
| 192 | [ 0.214041] ACPI: bus type PCI registered |
| 193 | [ 0.214047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 194 | [ 0.214323] PCI: Using configuration type 1 for base access |
| 195 | [ 0.214326] PCI: Using configuration type 1 for extended access |
| 196 | [ 0.214808] mtrr: your CPUs had inconsistent variable MTRR settings |
| 197 | [ 0.214811] mtrr: probably your BIOS does not setup all CPUs. |
| 198 | [ 0.214813] mtrr: corrected configuration. |
| 199 | [ 0.227715] ACPI: Added _OSI(Module Device) |
| 200 | [ 0.227724] ACPI: Added _OSI(Processor Device) |
| 201 | [ 0.227727] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 202 | [ 0.227730] ACPI: Added _OSI(Processor Aggregator Device) |
| 203 | [ 0.230091] ACPI: Executed 2 blocks of module-level executable AML code |
| 204 | [ 0.234786] ACPI: Interpreter enabled |
| 205 | [ 0.234806] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| 206 | [ 0.234833] ACPI: (supports S0 S1 S3 S4 S5) |
| 207 | [ 0.234836] ACPI: Using IOAPIC for interrupt routing |
| 208 | [ 0.234876] HEST: Table parsing has been initialized. |
| 209 | [ 0.234883] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 210 | [ 0.253586] ACPI: Power Resource [PFN0] (on) |
| 211 | [ 0.253999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 212 | [ 0.254011] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 213 | [ 0.254161] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 214 | [ 0.254729] PCI host bridge to bus 0000:00 |
| 215 | [ 0.254737] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 216 | [ 0.254742] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 217 | [ 0.254746] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| 218 | [ 0.254751] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 219 | [ 0.254755] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| 220 | [ 0.254771] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| 221 | [ 0.254963] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| 222 | [ 0.254982] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| 223 | [ 0.254993] pci 0000:00:01.0: reg 0x14: [io 0x1000-0x10ff] |
| 224 | [ 0.255004] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf003ffff] |
| 225 | [ 0.255070] pci 0000:00:01.0: supports D1 D2 |
| 226 | [ 0.255151] pci 0000:00:01.0: System wakeup disabled by ACPI |
| 227 | [ 0.255242] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| 228 | [ 0.255258] pci 0000:00:01.1: reg 0x10: [mem 0xf0040000-0xf0043fff] |
| 229 | [ 0.255334] pci 0000:00:01.1: supports D1 D2 |
| 230 | [ 0.255413] pci 0000:00:01.1: System wakeup disabled by ACPI |
| 231 | [ 0.255601] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| 232 | [ 0.255629] pci 0000:00:11.0: reg 0x10: [io 0x1410-0x1417] |
| 233 | [ 0.255644] pci 0000:00:11.0: reg 0x14: [io 0x1420-0x1423] |
| 234 | [ 0.255658] pci 0000:00:11.0: reg 0x18: [io 0x1418-0x141f] |
| 235 | [ 0.255672] pci 0000:00:11.0: reg 0x1c: [io 0x1424-0x1427] |
| 236 | [ 0.255686] pci 0000:00:11.0: reg 0x20: [io 0x1400-0x140f] |
| 237 | [ 0.255700] pci 0000:00:11.0: reg 0x24: [mem 0xf004b000-0xf004b3ff] |
| 238 | [ 0.255909] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| 239 | [ 0.255930] pci 0000:00:12.0: reg 0x10: [mem 0xf0048000-0xf0048fff] |
| 240 | [ 0.256075] pci 0000:00:12.0: System wakeup disabled by ACPI |
| 241 | [ 0.256242] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| 242 | [ 0.256269] pci 0000:00:12.2: reg 0x10: [mem 0xf004b400-0xf004b4ff] |
| 243 | [ 0.256378] pci 0000:00:12.2: supports D1 D2 |
| 244 | [ 0.256382] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| 245 | [ 0.256466] pci 0000:00:12.2: System wakeup disabled by ACPI |
| 246 | [ 0.256626] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| 247 | [ 0.256646] pci 0000:00:13.0: reg 0x10: [mem 0xf0049000-0xf0049fff] |
| 248 | [ 0.256792] pci 0000:00:13.0: System wakeup disabled by ACPI |
| 249 | [ 0.256921] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| 250 | [ 0.256948] pci 0000:00:13.2: reg 0x10: [mem 0xf004b500-0xf004b5ff] |
| 251 | [ 0.257057] pci 0000:00:13.2: supports D1 D2 |
| 252 | [ 0.257061] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| 253 | [ 0.257143] pci 0000:00:13.2: System wakeup disabled by ACPI |
| 254 | [ 0.257305] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| 255 | [ 0.257614] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| 256 | [ 0.257645] pci 0000:00:14.2: reg 0x10: [mem 0xf0044000-0xf0047fff 64bit] |
| 257 | [ 0.257733] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| 258 | [ 0.257913] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| 259 | [ 0.258204] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| 260 | [ 0.258326] pci 0000:00:14.4: System wakeup disabled by ACPI |
| 261 | [ 0.258482] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| 262 | [ 0.258502] pci 0000:00:14.5: reg 0x10: [mem 0xf004a000-0xf004afff] |
| 263 | [ 0.258649] pci 0000:00:14.5: System wakeup disabled by ACPI |
| 264 | [ 0.258809] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| 265 | [ 0.258978] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| 266 | [ 0.259142] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| 267 | [ 0.259308] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| 268 | [ 0.259485] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| 269 | [ 0.259652] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| 270 | [ 0.259815] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| 271 | [ 0.259978] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| 272 | [ 0.260404] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| 273 | [ 0.260420] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| 274 | [ 0.260425] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) |
| 275 | [ 0.260429] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| 276 | [ 0.260434] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| 277 | [ 0.261110] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| 278 | [ 0.261355] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| 279 | [ 0.261526] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| 280 | [ 0.261711] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| 281 | [ 0.261879] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| 282 | [ 0.261981] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. |
| 283 | [ 0.262147] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| 284 | [ 0.262318] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| 285 | [ 0.262661] ACPI: Enabled 6 GPEs in block 00 to 1F |
| 286 | [ 0.263156] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| 287 | [ 0.263172] vgaarb: loaded |
| 288 | [ 0.263175] vgaarb: bridge control possible 0000:00:01.0 |
| 289 | [ 0.263335] PCI: Using ACPI for IRQ routing |
| 290 | [ 0.263341] PCI: pci_cache_line_size set to 64 bytes |
| 291 | [ 0.263481] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 292 | [ 0.263486] e820: reserve RAM buffer [mem 0xc7fbe000-0xc7ffffff] |
| 293 | [ 0.263489] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] |
| 294 | [ 0.263852] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| 295 | [ 0.263861] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| 296 | [ 0.266008] Switched to clocksource hpet |
| 297 | [ 0.277910] pnp: PnP ACPI init |
| 298 | [ 0.277951] ACPI: bus type PNP registered |
| 299 | [ 0.278525] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 300 | [ 0.278817] pnp: PnP ACPI: found 1 devices |
| 301 | [ 0.278820] ACPI: bus type PNP unregistered |
| 302 | [ 0.301207] pci 0000:00:14.4: PCI bridge to [bus 01] |
| 303 | [ 0.301236] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 304 | [ 0.301241] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 305 | [ 0.301246] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 306 | [ 0.301250] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| 307 | [ 0.301256] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] |
| 308 | [ 0.301260] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] |
| 309 | [ 0.301264] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| 310 | [ 0.301268] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| 311 | [ 0.301461] NET: Registered protocol family 2 |
| 312 | [ 0.302204] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| 313 | [ 0.302621] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 314 | [ 0.303201] TCP: Hash tables configured (established 65536 bind 65536) |
| 315 | [ 0.303296] TCP: reno registered |
| 316 | [ 0.303330] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| 317 | [ 0.303427] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| 318 | [ 0.303909] NET: Registered protocol family 1 |
| 319 | [ 0.303953] pci 0000:00:01.0: Boot video device |
| 320 | [ 0.359532] PCI: CLS 64 bytes, default 64 |
| 321 | [ 0.359668] Unpacking initramfs... |
| 322 | [ 0.927864] Freeing initrd memory: 15108K (ffff88003626e000 - ffff88003712f000) |
| 323 | [ 0.927975] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 324 | [ 0.927982] software IO TLB [mem 0xc3fbe000-0xc7fbe000] (64MB) mapped at [ffff8800c3fbe000-ffff8800c7fbdfff] |
| 325 | [ 0.928479] microcode: CPU0: patch_level=0x05000028 |
| 326 | [ 0.928601] microcode: CPU1: patch_level=0x05000028 |
| 327 | [ 0.928941] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 328 | [ 0.928961] LVT offset 0 assigned for vector 0x400 |
| 329 | [ 0.929088] perf: AMD IBS detected (0x000000ff) |
| 330 | [ 0.930194] futex hash table entries: 512 (order: 3, 32768 bytes) |
| 331 | [ 0.930370] audit: initializing netlink subsys (disabled) |
| 332 | [ 0.930424] audit: type=2000 audit(1413623725.820:1): initialized |
| 333 | [ 0.931396] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 334 | [ 0.931454] zbud: loaded |
| 335 | [ 0.932238] VFS: Disk quotas dquot_6.5.2 |
| 336 | [ 0.932350] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 337 | [ 0.932545] msgmni has been set to 15214 |
| 338 | [ 0.934966] alg: No test for stdrng (krng) |
| 339 | [ 0.935212] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 340 | [ 0.935405] io scheduler noop registered |
| 341 | [ 0.935411] io scheduler deadline registered |
| 342 | [ 0.935584] io scheduler cfq registered (default) |
| 343 | [ 0.935798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 344 | [ 0.935839] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 345 | [ 0.936044] GHES: Failed to enable APEI firmware first mode. |
| 346 | [ 0.936448] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 347 | [ 0.957151] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 348 | [ 0.959211] Linux agpgart interface v0.103 |
| 349 | [ 0.959454] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| 350 | [ 0.963504] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 351 | [ 0.963527] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 352 | [ 0.964402] mousedev: PS/2 mouse device common for all mice |
| 353 | [ 0.964625] rtc_cmos 00:00: RTC can wake from S4 |
| 354 | [ 0.965062] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| 355 | [ 0.965188] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| 356 | [ 0.965228] ledtrig-cpu: registered to indicate activity on CPUs |
| 357 | [ 0.965364] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 358 | [ 0.965367] AMD IOMMUv2 functionality not available on this system |
| 359 | [ 0.965563] TCP: cubic registered |
| 360 | [ 0.965755] NET: Registered protocol family 10 |
| 361 | [ 0.966672] mip6: Mobile IPv6 |
| 362 | [ 0.966685] NET: Registered protocol family 17 |
| 363 | [ 0.966696] mpls_gso: MPLS GSO support |
| 364 | [ 0.968442] registered taskstats version 1 |
| 365 | [ 0.969504] rtc_cmos 00:00: setting system clock to 2014-10-18 09:15:26 UTC (1413623726) |
| 366 | [ 0.969631] PM: Hibernation image not present or could not be loaded. |
| 367 | [ 0.972038] Freeing unused kernel memory: 1196K (ffffffff818ed000 - ffffffff81a18000) |
| 368 | [ 0.972048] Write protecting the kernel read-only data: 8192k |
| 369 | [ 0.977579] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000) |
| 370 | [ 0.979214] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000) |
| 371 | [ 1.013069] systemd-udevd[60]: starting version 215 |
| 372 | [ 1.013712] random: systemd-udevd urandom read with 2 bits of entropy available |
| 373 | [ 1.040630] ACPI: bus type USB registered |
| 374 | [ 1.040701] usbcore: registered new interface driver usbfs |
| 375 | [ 1.040727] usbcore: registered new interface driver hub |
| 376 | [ 1.044861] SCSI subsystem initialized |
| 377 | [ 1.045438] usbcore: registered new device driver usb |
| 378 | [ 1.046713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 379 | [ 1.047510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 380 | [ 1.047943] ehci-pci: EHCI PCI platform driver |
| 381 | [ 1.048361] QUIRK: Enable AMD PLL fix |
| 382 | [ 1.048398] ehci-pci 0000:00:12.2: EHCI Host Controller |
| 383 | [ 1.048413] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| 384 | [ 1.048428] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 385 | [ 1.048513] ehci-pci 0000:00:12.2: debug port 1 |
| 386 | [ 1.048590] ehci-pci 0000:00:12.2: irq 17, io mem 0xf004b400 |
| 387 | [ 1.052307] libata version 3.00 loaded. |
| 388 | [ 1.058070] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| 389 | [ 1.058211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 390 | [ 1.058217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 391 | [ 1.058221] usb usb1: Product: EHCI Host Controller |
| 392 | [ 1.058225] usb usb1: Manufacturer: Linux 3.16-2-amd64 ehci_hcd |
| 393 | [ 1.058229] usb usb1: SerialNumber: 0000:00:12.2 |
| 394 | [ 1.058512] hub 1-0:1.0: USB hub found |
| 395 | [ 1.058532] hub 1-0:1.0: 5 ports detected |
| 396 | [ 1.059205] ehci-pci 0000:00:13.2: EHCI Host Controller |
| 397 | [ 1.059219] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| 398 | [ 1.059231] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 399 | [ 1.059248] ehci-pci 0000:00:13.2: debug port 1 |
| 400 | [ 1.059306] ehci-pci 0000:00:13.2: irq 17, io mem 0xf004b500 |
| 401 | [ 1.069356] ACPI: Fan [FAN0] (on) |
| 402 | [ 1.070085] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| 403 | [ 1.070208] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 404 | [ 1.070213] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 405 | [ 1.070218] usb usb2: Product: EHCI Host Controller |
| 406 | [ 1.070222] usb usb2: Manufacturer: Linux 3.16-2-amd64 ehci_hcd |
| 407 | [ 1.070226] usb usb2: SerialNumber: 0000:00:13.2 |
| 408 | [ 1.070973] hub 2-0:1.0: USB hub found |
| 409 | [ 1.071163] hub 2-0:1.0: 5 ports detected |
| 410 | [ 1.072852] ohci-pci: OHCI PCI platform driver |
| 411 | [ 1.073234] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| 412 | [ 1.073249] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| 413 | [ 1.073320] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0048000 |
| 414 | [ 1.075345] thermal LNXTHERM:00: registered as thermal_zone0 |
| 415 | [ 1.075355] ACPI: Thermal Zone [TZ00] (40 C) |
| 416 | [ 1.130633] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| 417 | [ 1.130643] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 418 | [ 1.130647] usb usb3: Product: OHCI PCI host controller |
| 419 | [ 1.130651] usb usb3: Manufacturer: Linux 3.16-2-amd64 ohci_hcd |
| 420 | [ 1.130655] usb usb3: SerialNumber: 0000:00:12.0 |
| 421 | [ 1.131242] hub 3-0:1.0: USB hub found |
| 422 | [ 1.131268] hub 3-0:1.0: 5 ports detected |
| 423 | [ 1.131905] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| 424 | [ 1.131919] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| 425 | [ 1.131973] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0049000 |
| 426 | [ 1.190478] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| 427 | [ 1.190488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 428 | [ 1.190492] usb usb4: Product: OHCI PCI host controller |
| 429 | [ 1.190497] usb usb4: Manufacturer: Linux 3.16-2-amd64 ohci_hcd |
| 430 | [ 1.190500] usb usb4: SerialNumber: 0000:00:13.0 |
| 431 | [ 1.191121] hub 4-0:1.0: USB hub found |
| 432 | [ 1.191146] hub 4-0:1.0: 5 ports detected |
| 433 | [ 1.191777] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| 434 | [ 1.191791] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| 435 | [ 1.191841] ohci-pci 0000:00:14.5: irq 18, io mem 0xf004a000 |
| 436 | [ 1.250552] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| 437 | [ 1.250562] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 438 | [ 1.250567] usb usb5: Product: OHCI PCI host controller |
| 439 | [ 1.250571] usb usb5: Manufacturer: Linux 3.16-2-amd64 ohci_hcd |
| 440 | [ 1.250575] usb usb5: SerialNumber: 0000:00:14.5 |
| 441 | [ 1.250912] hub 5-0:1.0: USB hub found |
| 442 | [ 1.251004] hub 5-0:1.0: 2 ports detected |
| 443 | [ 1.251752] ahci 0000:00:11.0: version 3.0 |
| 444 | [ 1.252359] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| 445 | [ 1.252366] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| 446 | [ 1.254732] scsi0 : ahci |
| 447 | [ 1.255029] scsi1 : ahci |
| 448 | [ 1.255279] scsi2 : ahci |
| 449 | [ 1.255473] scsi3 : ahci |
| 450 | [ 1.255646] scsi4 : ahci |
| 451 | [ 1.255820] scsi5 : ahci |
| 452 | [ 1.255928] ata1: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b100 irq 19 |
| 453 | [ 1.255933] ata2: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b180 irq 19 |
| 454 | [ 1.255938] ata3: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b200 irq 19 |
| 455 | [ 1.255943] ata4: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b280 irq 19 |
| 456 | [ 1.255947] ata5: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b300 irq 19 |
| 457 | [ 1.255951] ata6: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b380 irq 19 |
| 458 | [ 1.370454] usb 1-3: new high-speed USB device number 2 using ehci-pci |
| 459 | [ 1.520234] usb 1-3: New USB device found, idVendor=148f, idProduct=2870 |
| 460 | [ 1.520245] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 461 | [ 1.520249] usb 1-3: Product: 802.11 n WLAN |
| 462 | [ 1.520253] usb 1-3: Manufacturer: Ralink |
| 463 | [ 1.574350] ata4: SATA link down (SStatus 0 SControl 300) |
| 464 | [ 1.574404] ata6: SATA link down (SStatus 0 SControl 300) |
| 465 | [ 1.574447] ata5: SATA link down (SStatus 0 SControl 300) |
| 466 | [ 1.574477] ata3: SATA link down (SStatus 0 SControl 300) |
| 467 | [ 1.574528] ata2: SATA link down (SStatus 0 SControl 300) |
| 468 | [ 1.746341] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 469 | [ 1.747300] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 |
| 470 | [ 1.747309] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32) |
| 471 | [ 1.748426] ata1.00: configured for UDMA/133 |
| 472 | [ 1.749074] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 |
| 473 | [ 1.785777] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) |
| 474 | [ 1.785929] sd 0:0:0:0: [sda] Write Protect is off |
| 475 | [ 1.785935] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 476 | [ 1.785984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 477 | [ 1.786934] sda: sda1 |
| 478 | [ 1.788563] sd 0:0:0:0: [sda] Attached SCSI disk |
| 479 | [ 1.790108] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 480 | [ 1.842150] usb 4-2: new low-speed USB device number 2 using ohci-pci |
| 481 | [ 1.926175] tsc: Refined TSC clocksource calibration: 1599.999 MHz |
| 482 | [ 1.970924] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| 483 | [ 2.027448] usb 4-2: New USB device found, idVendor=046d, idProduct=c31b |
| 484 | [ 2.027459] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 485 | [ 2.027464] usb 4-2: Product: Logitech USB Keyboard |
| 486 | [ 2.027468] usb 4-2: Manufacturer: Logitech |
| 487 | [ 2.456249] fuse init (API version 7.23) |
| 488 | [ 2.581100] systemd-udevd[167]: starting version 215 |
| 489 | [ 2.768257] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| 490 | [ 2.768271] ACPI: Power Button [PWRB] |
| 491 | [ 2.768388] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| 492 | [ 2.768393] ACPI: Power Button [PWRF] |
| 493 | [ 2.769629] ACPI: acpi_idle registered with cpuidle |
| 494 | [ 2.776278] acpi-cpufreq: overriding BIOS provided _PSD data |
| 495 | [ 2.812754] [drm] Initialized drm 1.1.0 20060810 |
| 496 | [ 2.835691] snd_hda_intel 0000:00:01.1: irq 40 for MSI/MSI-X |
| 497 | [ 2.850588] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0b (\SMB0) (20140424/utaddress-258) |
| 498 | [ 2.850605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 499 | [ 2.854826] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 |
| 500 | [ 2.854956] sp5100_tco: PCI Revision ID: 0x42 |
| 501 | [ 2.855005] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address |
| 502 | [ 2.855019] sp5100_tco: Last reboot was not triggered by watchdog. |
| 503 | [ 2.860099] sp5100_tco: initialized (0xffffc90000e2eb00). heartbeat=60 sec (nowayout=0) |
| 504 | [ 2.882481] [drm] radeon kernel modesetting enabled. |
| 505 | [ 2.884214] hidraw: raw HID events driver (C) Jiri Kosina |
| 506 | [ 2.886335] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4 |
| 507 | [ 2.896105] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802). |
| 508 | [ 2.896137] [drm] register mmio base: 0xF0000000 |
| 509 | [ 2.896140] [drm] register mmio size: 262144 |
| 510 | [ 2.896226] ATOM BIOS: AMD |
| 511 | [ 2.896305] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| 512 | [ 2.896310] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| 513 | [ 2.896314] [drm] Detected VRAM RAM=384M, BAR=256M |
| 514 | [ 2.896317] [drm] RAM width 32bits DDR |
| 515 | [ 2.897892] input: PC Speaker as /devices/platform/pcspkr/input/input5 |
| 516 | [ 2.901094] [TTM] Zone kernel: Available graphics memory: 3896140 kiB |
| 517 | [ 2.901105] [TTM] Zone dma32: Available graphics memory: 2097152 kiB |
| 518 | [ 2.901108] [TTM] Initializing pool allocator |
| 519 | [ 2.901121] [TTM] Initializing DMA pool allocator |
| 520 | [ 2.901175] [drm] radeon: 384M of VRAM memory ready |
| 521 | [ 2.901179] [drm] radeon: 1024M of GTT memory ready. |
| 522 | [ 2.901214] [drm] Loading PALM Microcode |
| 523 | [ 2.903168] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin |
| 524 | [ 2.904314] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin |
| 525 | [ 2.904927] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin |
| 526 | [ 2.904941] [drm] Internal thermal controller without fan control |
| 527 | [ 2.905035] [drm] Found smc ucode version: 0x00010601 |
| 528 | [ 2.905132] [drm] radeon: dpm initialized |
| 529 | [ 2.907332] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin |
| 530 | [ 2.907419] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| 531 | [ 2.916466] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| 532 | [ 2.916919] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| 533 | [ 2.916924] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 534 | [ 2.916933] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| 535 | [ 2.916937] sound hdaudioC1D0: mono: mono_out=0x0 |
| 536 | [ 2.916941] sound hdaudioC1D0: dig-out=0x1e/0x0 |
| 537 | [ 2.916944] sound hdaudioC1D0: inputs: |
| 538 | [ 2.916950] sound hdaudioC1D0: Rear Mic=0x18 |
| 539 | [ 2.916954] sound hdaudioC1D0: Front Mic=0x19 |
| 540 | [ 2.916957] sound hdaudioC1D0: Line=0x1a |
| 541 | [ 2.916961] sound hdaudioC1D0: CD=0x1c |
| 542 | [ 2.920003] usbcore: registered new interface driver usbhid |
| 543 | [ 2.920011] usbhid: USB HID core driver |
| 544 | [ 2.943555] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). |
| 545 | [ 2.943790] radeon 0000:00:01.0: WB enabled |
| 546 | [ 2.943798] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800c3b6ac00 |
| 547 | [ 2.943804] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800c3b6ac0c |
| 548 | [ 2.944582] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000fb2118 |
| 549 | [ 2.944588] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 550 | [ 2.944590] [drm] Driver supports precise vblank timestamp query. |
| 551 | [ 2.944625] radeon 0000:00:01.0: irq 41 for MSI/MSI-X |
| 552 | [ 2.944651] radeon 0000:00:01.0: radeon: using MSI. |
| 553 | [ 2.944691] [drm] radeon: irq initialized. |
| 554 | [ 2.978153] [drm] ring test on 0 succeeded in 1 usecs |
| 555 | [ 2.978341] [drm] ring test on 3 succeeded in 1 usecs |
| 556 | [ 2.986470] kvm: Nested Virtualization enabled |
| 557 | [ 2.986481] kvm: Nested Paging enabled |
| 558 | [ 3.044274] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input8 |
| 559 | [ 3.044720] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| 560 | [ 3.044796] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| 561 | [ 3.044871] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| 562 | [ 3.044946] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| 563 | [ 3.045023] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 |
| 564 | [ 3.045097] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 |
| 565 | [ 3.045170] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input15 |
| 566 | [ 3.045244] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16 |
| 567 | [ 3.045405] [drm] ring test on 5 succeeded in 1 usecs |
| 568 | [ 3.065325] [drm] UVD initialized successfully. |
| 569 | [ 3.065417] Switched to clocksource tsc |
| 570 | [ 3.066655] [drm] ib test on ring 0 succeeded in 0 usecs |
| 571 | [ 3.066701] [drm] ib test on ring 3 succeeded in 0 usecs |
| 572 | [ 3.089426] [drm] ib test on ring 5 succeeded |
| 573 | [ 3.101823] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/0003:046D:C31B.0001/input/input17 |
| 574 | [ 3.103951] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input0 |
| 575 | [ 3.107575] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.1/0003:046D:C31B.0002/input/input18 |
| 576 | [ 3.113889] hid-generic 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input1 |
| 577 | [ 3.126343] [drm] Radeon Display Connectors |
| 578 | [ 3.126352] [drm] Connector 0: |
| 579 | [ 3.126355] [drm] HDMI-A-1 |
| 580 | [ 3.126357] [drm] HPD1 |
| 581 | [ 3.126362] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| 582 | [ 3.126365] [drm] Encoders: |
| 583 | [ 3.126367] [drm] DFP1: INTERNAL_UNIPHY |
| 584 | [ 3.126370] [drm] Connector 1: |
| 585 | [ 3.126372] [drm] HDMI-A-2 |
| 586 | [ 3.126374] [drm] HPD2 |
| 587 | [ 3.126378] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| 588 | [ 3.126380] [drm] Encoders: |
| 589 | [ 3.126382] [drm] DFP2: INTERNAL_UNIPHY |
| 590 | [ 3.126384] [drm] Connector 2: |
| 591 | [ 3.126386] [drm] VGA-1 |
| 592 | [ 3.126389] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| 593 | [ 3.126391] [drm] Encoders: |
| 594 | [ 3.126393] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| 595 | [ 3.229696] [drm] fb mappable at 0xE0477000 |
| 596 | [ 3.229706] [drm] vram apper at 0xE0000000 |
| 597 | [ 3.229708] [drm] size 3686400 |
| 598 | [ 3.229711] [drm] fb depth is 24 |
| 599 | [ 3.229714] [drm] pitch is 5120 |
| 600 | [ 3.230770] fbcon: radeondrmfb (fb0) is primary device |
| 601 | [ 3.250980] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| 602 | [ 3.260613] Console: switching to colour frame buffer device 160x45 |
| 603 | [ 3.266907] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| 604 | [ 3.266912] radeon 0000:00:01.0: registered panic notifier |
| 605 | [ 3.281212] systemd-journald[149]: Received request to flush runtime journal from PID 1 |
| 606 | [ 3.282205] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0 |
| 607 | [ 3.405518] random: nonblocking pool is initialized |
| 608 | [ 4.098674] cfg80211: Calling CRDA to update world regulatory domain |
| 609 | [ 4.252170] usb 1-3: reset high-speed USB device number 2 using ehci-pci |
| 610 | [ 4.396932] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected |
| 611 | [ 4.451463] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected |
| 612 | [ 4.489289] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 613 | [ 4.489974] usbcore: registered new interface driver rt2800usb |
| 614 | [ 4.597106] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' |
| 615 | [ 4.597759] rt2800usb 1-3:1.0: firmware: direct-loading firmware rt2870.bin |
| 616 | [ 4.597776] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 |
| 617 | [ 4.964540] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 618 | [ 6.137652] cfg80211: Calling CRDA to update world regulatory domain |
| 619 | [ 6.449925] wlan0: authenticate with 00:3a:98:a9:fd:47 |
| 620 | [ 6.486437] wlan0: direct probe to 00:3a:98:a9:fd:47 (try 1/3) |
| 621 | [ 6.690166] wlan0: send auth to 00:3a:98:a9:fd:47 (try 2/3) |
| 622 | [ 6.798086] wlan0: send auth to 00:3a:98:a9:fd:47 (try 3/3) |
| 623 | [ 6.801551] wlan0: authenticated |
| 624 | [ 6.806081] wlan0: associate with 00:3a:98:a9:fd:47 (try 1/3) |
| 625 | [ 6.812392] wlan0: RX AssocResp from 00:3a:98:a9:fd:47 (capab=0x431 status=0 aid=5) |
| 626 | [ 6.823310] wlan0: associated |
| 627 | [ 6.823412] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 628 | [ 6.823502] cfg80211: Calling CRDA to update world regulatory domain |
| 629 | [ 75.537488] wlan0: authenticate with 00:3a:98:bf:e8:d7 |
| 630 | [ 75.575560] wlan0: send auth to 00:3a:98:bf:e8:d7 (try 1/3) |
| 631 | [ 75.582219] cfg80211: Calling CRDA for country: CZ |
| 632 | [ 75.582910] wlan0: authenticated |
| 633 | [ 75.590542] wlan0: associate with 00:3a:98:bf:e8:d7 (try 1/3) |
| 634 | [ 75.594602] wlan0: RX AssocResp from 00:3a:98:bf:e8:d7 (capab=0x431 status=0 aid=26) |
| 635 | [ 75.601693] wlan0: associated |