Gitiles
Code Review Sign In
review.coreboot.org / board-status / 699301f85ea01db548de68aee13f301c036e3df3 / . / emulation / qemu-q35 / 4.0-9672-gcbcf28f / 2015-05-14T13:08:52Z / kernel_log.txt
blob: 682c965e6bfc840ef7f9833530b6629c9a210c15 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standa2704482015-05-14 14:46:53 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffaffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffb0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9672-gcbcf28f-dirty 05/14/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffb0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f5fffff]
42[ 0.000000] [mem 0x1f400000-0x1f5fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f3fffff]
44[ 0.000000] [mem 0x1c000000-0x1f3fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f600000-0x1ffaffff]
49[ 0.000000] [mem 0x1f600000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ffaffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f602000-0x1fe8bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: APIC 0x000000001FFBAED0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: HPET 0x000000001FFBAF30 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: Local APIC address 0xfee00000
63[ 0.000000] No NUMA configuration found
64[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffaffff]
65[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffaffff]
66[ 0.000000] NODE_DATA [mem 0x1ffab000-0x1ffaffff]
67[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
68[ 0.000000] kvm-clock: cpu 0, msr 0:1ffa3001, primary cpu clock
69[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e600000-ffff88001edfffff] on node 0
70[ 0.000000] Zone ranges:
71[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
72[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
73[ 0.000000] Normal empty
74[ 0.000000] Movable zone start for each node
75[ 0.000000] Early memory node ranges
76[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
77[ 0.000000] node 0: [mem 0x00100000-0x1ffaffff]
78[ 0.000000] On node 0 totalpages: 130894
79[ 0.000000] DMA zone: 56 pages used for memmap
80[ 0.000000] DMA zone: 21 pages reserved
81[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
82[ 0.000000] DMA32 zone: 1735 pages used for memmap
83[ 0.000000] DMA32 zone: 126896 pages, LIFO batch:31
84[ 0.000000] ACPI: PM-Timer IO Port: 0x608
85[ 0.000000] ACPI: Local APIC address 0xfee00000
86[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
87[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
88[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
89[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
91[ 0.000000] ACPI: IRQ0 used by override.
92[ 0.000000] ACPI: IRQ2 used by override.
93[ 0.000000] ACPI: IRQ9 used by override.
94[ 0.000000] Using ACPI (MADT) for SMP configuration information
95[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
96[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
97[ 0.000000] nr_irqs_gsi: 40
98[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
99[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
101[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
102[ 0.000000] Booting paravirtualized kernel on KVM
103[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
104[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f400000 s80896 r8192 d21504 u2097152
105[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
106[ 0.000000] pcpu-alloc: [0] 0
107[ 0.000000] KVM setup async PF for cpu 0
108[ 0.000000] kvm-stealtime: cpu 0, msr 1f40d080
109[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129082
110[ 0.000000] Policy zone: DMA32
111[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
112[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
113[ 0.000000] AGP: Checking aperture...
114[ 0.000000] AGP: No AGP bridge found
115[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
116[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
117[ 0.000000] Memory: 494932K/523576K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
118[ 0.000000] Hierarchical RCU implementation.
119[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
120[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
121[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
122[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
123[ 0.000000] Console: colour VGA+ 80x25
124[ 0.000000] console [tty0] enabled
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008013] ACPI: Core revision 20140424
131[ 0.012285] ACPI: All ACPI Tables successfully acquired
132[ 0.014014] Security Framework initialized
133[ 0.015341] AppArmor: AppArmor disabled by boot time parameter
134[ 0.016007] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.018134] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.020232] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.021937] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.024008] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.025891] Initializing cgroup subsys memory
140[ 0.027058] Initializing cgroup subsys devices
141[ 0.028014] Initializing cgroup subsys freezer
142[ 0.029465] Initializing cgroup subsys net_cls
143[ 0.030807] Initializing cgroup subsys blkio
144[ 0.032008] Initializing cgroup subsys perf_event
145[ 0.033344] Initializing cgroup subsys net_prio
146[ 0.036015] mce: CPU supports 10 MCE banks
147[ 0.037587] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.050239] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.056735] ftrace: allocating 21601 entries in 85 pages
152[ 0.065695] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.067183] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
154[ 0.072000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.072000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.074218] x86: Booted up 1 node, 1 CPUs
157[ 0.075358] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.076577] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.078209] devtmpfs: initialized
160[ 0.086608] pinctrl core: initialized pinctrl subsystem
161[ 0.088044] NET: Registered protocol family 16
162[ 0.089378] cpuidle: using governor ladder
163[ 0.090546] cpuidle: using governor menu
164[ 0.091795] ACPI: bus type PCI registered
165[ 0.092003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.093681] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.096003] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.098050] PCI: Using configuration type 1 for base access
169[ 0.101025] ACPI: Added _OSI(Module Device)
170[ 0.102233] ACPI: Added _OSI(Processor Device)
171[ 0.103384] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.104003] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.110825] ACPI: Interpreter enabled
174[ 0.111910] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.113823] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.116848] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.119325] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.121837] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.124011] ACPI: (supports S0)
180[ 0.124970] ACPI: Using IOAPIC for interrupt routing
181[ 0.126232] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.132027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.133573] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.135975] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.136129] PCI host bridge to bus 0000:00
186[ 0.137266] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.140013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.141773] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.144012] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.145805] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.148016] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.148438] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.151656] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.153424] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.166652] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.166882] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.169311] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.172013] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.185201] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.185662] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.186121] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.188030] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.189898] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.201223] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.204008] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.206807] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.207028] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.208304] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.210506] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.212150] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.214270] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.217294] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.219418] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.221311] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.224019] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.226015] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.227570] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.228790] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.230380] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.232009] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.233578] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.235124] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.236760] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.238604] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.240169] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.241615] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.244011] vgaarb: loaded
228[ 0.244901] vgaarb: bridge control possible 0000:00:01.0
229[ 0.246291] PCI: Using ACPI for IRQ routing
230[ 0.302020] PCI: pci_cache_line_size set to 64 bytes
231[ 0.302131] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.302135] e820: reserve RAM buffer [mem 0x1ffb0000-0x1fffffff]
233[ 0.302339] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.304002] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.305616] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.309177] Switched to clocksource kvm-clock
237[ 0.317563] pnp: PnP ACPI init
238[ 0.318688] ACPI: bus type PNP registered
239[ 0.320206] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.320283] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.320343] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.320474] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.320560] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.320953] pnp: PnP ACPI: found 5 devices
245[ 0.322137] ACPI: bus type PNP unregistered
246[ 0.330583] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.332180] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.332182] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.332185] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.332187] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.332223] NET: Registered protocol family 2
252[ 0.333656] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.335315] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.336830] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.338330] TCP: reno registered
256[ 0.339363] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.340770] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.342267] NET: Registered protocol family 1
259[ 0.343494] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.343549] PCI: CLS 64 bytes, default 64
261[ 0.343609] Unpacking initramfs...
262[ 0.546160] Freeing initrd memory: 8744K (ffff88001f602000 - ffff88001fe8c000)
263[ 0.548625] microcode: AMD CPU family 0x6 not supported
264[ 0.550260] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.552223] audit: initializing netlink subsys (disabled)
266[ 0.553588] audit: type=2000 audit(1431614386.913:1): initialized
267[ 0.555411] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.557003] zbud: loaded
269[ 0.558073] VFS: Disk quotas dquot_6.5.2
270[ 0.559262] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.560909] msgmni has been set to 983
272[ 0.562348] alg: No test for stdrng (krng)
273[ 0.563574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.565752] io scheduler noop registered
275[ 0.566877] io scheduler deadline registered
276[ 0.568077] io scheduler cfq registered (default)
277[ 0.569383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.571108] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.573098] GHES: HEST is not enabled!
280[ 0.574484] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.887243] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.889949] Linux agpgart interface v0.103
283[ 0.891253] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.894425] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.895986] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.897418] mousedev: PS/2 mouse device common for all mice
287[ 0.899420] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.901981] rtc_cmos 00:00: RTC can wake from S4
289[ 0.903836] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.905946] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.908183] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.910057] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.911589] AMD IOMMUv2 functionality not available on this system
294[ 0.913232] TCP: cubic registered
295[ 0.914319] NET: Registered protocol family 10
296[ 0.915762] mip6: Mobile IPv6
297[ 0.916837] NET: Registered protocol family 17
298[ 0.918049] mpls_gso: MPLS GSO support
299[ 0.919391] registered taskstats version 1
300[ 0.920946] rtc_cmos 00:00: setting system clock to 2015-05-14 14:39:47 UTC (1431614387)
301[ 0.923276] PM: Hibernation image not present or could not be loaded.
302[ 0.925013] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
303[ 0.927198] Write protecting the kernel read-only data: 8192k
304[ 0.931379] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
305[ 0.934254] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.948285] systemd-udevd[52]: starting version 215
307[ 0.949948] random: systemd-udevd urandom read with 2 bits of entropy available
308[ 0.961655] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 0.963346] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 0.977737] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
311[ 1.364974] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
312[ 1.366624] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
313[ 1.375102] FS-Cache: Loaded
314[ 1.379626] RPC: Registered named UNIX socket transport module.
315[ 1.381208] RPC: Registered udp transport module.
316[ 1.382444] RPC: Registered tcp transport module.
317[ 1.383669] RPC: Registered tcp NFSv4.1 backchannel transport module.
318[ 1.389711] FS-Cache: Netfs 'nfs' registered for caching
319[ 1.401589] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
320[ 1.548062] tsc: Refined TSC clocksource calibration: 2312.026 MHz
321[ 3.404844] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
322[ 3.409439] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
323[ 9.001919] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
324[ 9.007358] systemd[1]: Detected virtualization 'kvm'.
325[ 9.009190] systemd[1]: Detected architecture 'x86-64'.
326[ 10.593189] random: nonblocking pool is initialized
327[ 10.685289] systemd[1]: Inserted module 'autofs4'
328[ 10.691673] systemd[1]: Set hostname to <cb-test-tgt>.
329[ 13.046354] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 13.051655] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 13.056632] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
332[ 13.058866] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
333[ 13.061178] systemd[1]: Expecting device dev-ttyS0.device...
334[ 13.064359] systemd[1]: Starting Remote File Systems (Pre).
335[ 13.067503] systemd[1]: Reached target Remote File Systems (Pre).
336[ 13.069593] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
337[ 13.072122] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
338[ 13.074477] systemd[1]: Starting Paths.
339[ 13.077225] systemd[1]: Reached target Paths.
340[ 13.078480] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
341[ 13.083057] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
342[ 13.085588] systemd[1]: Starting Encrypted Volumes.
343[ 13.088358] systemd[1]: Reached target Encrypted Volumes.
344[ 13.089745] systemd[1]: Starting Swap.
345[ 13.092113] systemd[1]: Reached target Swap.
346[ 13.093304] systemd[1]: Starting Root Slice.
347[ 13.095702] systemd[1]: Created slice Root Slice.
348[ 13.097018] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
349[ 13.101394] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
350[ 13.103023] systemd[1]: Starting Delayed Shutdown Socket.
351[ 13.105753] systemd[1]: Listening on Delayed Shutdown Socket.
352[ 13.107145] systemd[1]: Starting Journal Socket (/dev/log).
353[ 13.111418] systemd[1]: Listening on Journal Socket (/dev/log).
354[ 13.112929] systemd[1]: Starting udev Control Socket.
355[ 13.115593] systemd[1]: Listening on udev Control Socket.
356[ 13.117003] systemd[1]: Starting udev Kernel Socket.
357[ 13.119625] systemd[1]: Listening on udev Kernel Socket.
358[ 13.120997] systemd[1]: Starting User and Session Slice.
359[ 13.123721] systemd[1]: Created slice User and Session Slice.
360[ 13.125208] systemd[1]: Starting Journal Socket.
361[ 13.127753] systemd[1]: Listening on Journal Socket.
362[ 13.129056] systemd[1]: Starting System Slice.
363[ 13.131529] systemd[1]: Created slice System Slice.
364[ 13.132886] systemd[1]: Starting Increase datagram queue length...
365[ 13.136049] systemd[1]: Mounting Huge Pages File System...
366[ 13.139966] systemd[1]: Mounting POSIX Message Queue File System...
367[ 13.189896] systemd[1]: Starting Create list of required static device nodes for the current kernel...
368[ 13.197739] systemd[1]: Mounting Debug File System...
369[ 13.795129] systemd[1]: Started Set Up Additional Binary Formats.
370[ 16.102886] systemd[1]: Starting Load Kernel Modules...
371[ 16.114310] systemd[1]: Starting udev Coldplug all Devices...
372[ 16.119512] systemd[1]: Starting system-getty.slice.
373[ 16.124374] systemd[1]: Created slice system-getty.slice.
374[ 16.125772] systemd[1]: Starting system-serial\x2dgetty.slice.
375[ 16.128879] systemd[1]: Created slice system-serial\x2dgetty.slice.
376[ 16.130734] systemd[1]: Starting Slices.
377[ 16.133587] systemd[1]: Reached target Slices.
378[ 16.134806] systemd[1]: Starting Remount Root and Kernel File Systems...
379[ 16.139896] systemd[1]: Mounted Debug File System.
380[ 16.143547] systemd[1]: Mounted POSIX Message Queue File System.
381[ 16.151079] systemd[1]: Mounted Huge Pages File System.
382[ 16.154165] systemd[1]: Started Increase datagram queue length.
383[ 16.157830] systemd[1]: Started Create list of required static device nodes for the current kernel.
384[ 16.170865] systemd[1]: Starting Create Static Device Nodes in /dev...
385[ 16.174355] systemd[1]: Starting Syslog Socket.
386[ 16.178101] systemd[1]: Listening on Syslog Socket.
387[ 16.179426] systemd[1]: Starting Sockets.
388[ 16.181891] systemd[1]: Reached target Sockets.
389[ 16.183406] systemd[1]: Starting Journal Service...
390[ 16.189589] systemd[1]: Started Journal Service.
391[ 19.316257] systemd-udevd[127]: starting version 215
392[ 27.920117] nfs: server 10.100.1.1 not responding, still trying
393[ 27.980092] nfs: server 10.100.1.1 not responding, still trying
394[ 28.116097] nfs: server 10.100.1.1 not responding, still trying
395[ 28.143906] nfs: server 10.100.1.1 OK
396[ 28.146341] nfs: server 10.100.1.1 OK
397[ 28.176064] nfs: server 10.100.1.1 not responding, still trying
398[ 28.177613] nfs: server 10.100.1.1 not responding, still trying
399[ 28.179353] nfs: server 10.100.1.1 not responding, still trying
400[ 28.181373] nfs: server 10.100.1.1 not responding, still trying
401[ 28.183189] nfs: server 10.100.1.1 not responding, still trying
402[ 28.184935] nfs: server 10.100.1.1 not responding, still trying
403[ 28.186757] nfs: server 10.100.1.1 not responding, still trying
404[ 28.188846] nfs: server 10.100.1.1 not responding, still trying
405[ 28.190296] nfs: server 10.100.1.1 not responding, still trying
406[ 28.191906] nfs: server 10.100.1.1 not responding, still trying
407[ 28.193862] nfs: server 10.100.1.1 not responding, still trying
408[ 28.195330] nfs: server 10.100.1.1 not responding, still trying
409[ 28.197242] nfs: server 10.100.1.1 OK
410[ 28.203243] nfs: server 10.100.1.1 not responding, still trying
411[ 28.206942] nfs: server 10.100.1.1 OK
412[ 28.248223] nfs: server 10.100.1.1 OK
413[ 28.291805] nfs: server 10.100.1.1 OK
414[ 28.333070] nfs: server 10.100.1.1 OK
415[ 28.383615] nfs: server 10.100.1.1 OK
416[ 28.433323] nfs: server 10.100.1.1 OK
417[ 28.490824] nfs: server 10.100.1.1 OK
418[ 28.558871] nfs: server 10.100.1.1 OK
419[ 28.620573] nfs: server 10.100.1.1 OK
420[ 28.688710] nfs: server 10.100.1.1 OK
421[ 28.748756] nfs: server 10.100.1.1 OK
422[ 28.802005] nfs: server 10.100.1.1 OK
423[ 28.810778] nfs: server 10.100.1.1 OK
424[ 29.320223] nfs: server 10.100.1.1 not responding, still trying
425[ 29.352080] nfs: server 10.100.1.1 not responding, still trying
426[ 29.354983] nfs: server 10.100.1.1 not responding, still trying
427[ 29.357721] nfs: server 10.100.1.1 not responding, still trying
428[ 29.360262] nfs: server 10.100.1.1 not responding, still trying
429[ 29.361900] nfs: server 10.100.1.1 not responding, still trying
430[ 29.363525] nfs: server 10.100.1.1 not responding, still trying
431[ 29.365445] nfs: server 10.100.1.1 not responding, still trying
432[ 29.367053] nfs: server 10.100.1.1 not responding, still trying
433[ 29.962111] nfs: server 10.100.1.1 OK
434[ 30.015261] nfs: server 10.100.1.1 OK
435[ 30.059423] nfs: server 10.100.1.1 OK
436[ 30.107349] nfs: server 10.100.1.1 OK
437[ 30.158421] nfs: server 10.100.1.1 OK
438[ 30.207857] nfs: server 10.100.1.1 OK
439[ 30.244343] nfs: server 10.100.1.1 OK
440[ 30.308026] nfs: server 10.100.1.1 OK
441[ 30.367553] nfs: server 10.100.1.1 OK
442[ 32.692213] nfs: server 10.100.1.1 not responding, still trying
443[ 32.695085] nfs: server 10.100.1.1 not responding, still trying
444[ 32.698593] nfs: server 10.100.1.1 not responding, still trying
445[ 32.701780] nfs: server 10.100.1.1 not responding, still trying
446[ 32.705049] nfs: server 10.100.1.1 not responding, still trying
447[ 32.728538] nfs: server 10.100.1.1 OK
448[ 32.805256] nfs: server 10.100.1.1 OK
449[ 32.853236] nfs: server 10.100.1.1 OK
450[ 32.910670] nfs: server 10.100.1.1 OK
451[ 32.941197] nfs: server 10.100.1.1 OK
452[ 35.858813] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
453[ 35.864214] ACPI: Power Button [PWRF]
454[ 36.001890] parport_pc 00:03: reported by Plug and Play ACPI
455[ 36.007376] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
456[ 36.511294] Floppy drive(s): fd0 is 1.44M
457[ 36.528516] FDC 0 is a S82078B
458[ 36.748392] SCSI subsystem initialized
459[ 36.837627] input: PC Speaker as /devices/platform/pcspkr/input/input3
460[ 37.219524] [drm] Initialized drm 1.1.0 20060810
461[ 37.795896] libata version 3.00 loaded.
462[ 37.819644] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
463[ 37.829639] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
464[ 37.834014] i801_smbus 0000:00:1f.3: Enabling SMBus device
465[ 37.837698] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
466[ 38.413351] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
467[ 38.491515] ppdev: user-space parallel port driver
468[ 38.678711] iTCO_vendor_support: vendor-support=0
469[ 38.694905] kvm: Nested Virtualization enabled
470[ 38.812241] ahci 0000:00:1f.2: version 3.0
471[ 38.814032] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
472[ 38.815557] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
473[ 38.818637] ahci 0000:00:1f.2: flags: ncq only
474[ 38.825541] scsi0 : ahci
475[ 38.826887] scsi1 : ahci
476[ 38.828576] scsi2 : ahci
477[ 38.829785] scsi3 : ahci
478[ 38.831086] scsi4 : ahci
479[ 38.832648] scsi5 : ahci
480[ 38.833681] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
481[ 38.836115] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
482[ 38.838398] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
483[ 38.840523] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
484[ 38.842583] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
485[ 38.844656] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
486[ 38.847058] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
487[ 38.850325] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
488[ 38.852283] iTCO_wdt: timeout value out of range, using 30
489[ 38.855098] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
490[ 39.168514] ata1: SATA link down (SStatus 0 SControl 300)
491[ 39.172447] ata2: SATA link down (SStatus 0 SControl 300)
492[ 39.176443] ata3: SATA link down (SStatus 0 SControl 300)
493[ 39.179028] ata4: SATA link down (SStatus 0 SControl 300)
494[ 39.182298] ata5: SATA link down (SStatus 0 SControl 300)
495[ 39.185494] ata6: SATA link down (SStatus 0 SControl 300)
496[ 44.114810] Key type dns_resolver registered
497[ 44.783689] NFS: Registering the id_resolver key type
498[ 44.785764] Key type id_resolver registered
499[ 44.787288] Key type id_legacy registered
500[ 47.480914] systemd-journald[116]: Received request to flush runtime journal from PID 1
501[ 48.121495] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
502[ 81.916136] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
503[ 194.268095] nfs: server 10.100.1.1 not responding, still trying
504[ 194.270162] nfs: server 10.100.1.1 not responding, still trying
505[ 194.273120] nfs: server 10.100.1.1 not responding, still trying
506[ 194.275310] nfs: server 10.100.1.1 not responding, still trying
507[ 194.277653] nfs: server 10.100.1.1 not responding, still trying
508[ 194.280189] nfs: server 10.100.1.1 not responding, still trying
509[ 194.282181] nfs: server 10.100.1.1 not responding, still trying
510[ 194.283814] nfs: server 10.100.1.1 not responding, still trying
511[ 194.285410] nfs: server 10.100.1.1 not responding, still trying
512[ 194.286571] nfs: server 10.100.1.1 not responding, still trying
513[ 194.287999] nfs: server 10.100.1.1 not responding, still trying
514[ 194.289531] nfs: server 10.100.1.1 not responding, still trying
515[ 194.290925] nfs: server 10.100.1.1 not responding, still trying
516[ 194.301990] nfs: server 10.100.1.1 OK
517[ 194.400226] nfs: server 10.100.1.1 OK
518[ 194.450173] nfs: server 10.100.1.1 OK
519[ 194.517191] nfs: server 10.100.1.1 OK
520[ 194.569600] nfs: server 10.100.1.1 OK
521[ 194.671347] nfs: server 10.100.1.1 OK
522[ 194.754010] nfs: server 10.100.1.1 OK
523[ 194.859055] nfs: server 10.100.1.1 OK
524[ 194.970167] nfs: server 10.100.1.1 OK
525[ 195.078656] nfs: server 10.100.1.1 OK
526[ 195.177977] nfs: server 10.100.1.1 OK
527[ 195.305835] nfs: server 10.100.1.1 OK
528[ 195.408029] nfs: server 10.100.1.1 OK
529[ 196.940233] nfs: server 10.100.1.1 not responding, still trying
530[ 196.943035] nfs: server 10.100.1.1 not responding, still trying
531[ 196.946062] nfs: server 10.100.1.1 not responding, still trying
532[ 196.948369] nfs: server 10.100.1.1 not responding, still trying
533[ 196.950591] nfs: server 10.100.1.1 not responding, still trying
534[ 198.472120] nfs: server 10.100.1.1 not responding, still trying
535[ 198.474810] nfs: server 10.100.1.1 not responding, still trying
536[ 198.528085] nfs: server 10.100.1.1 not responding, still trying
537[ 199.437917] nfs: server 10.100.1.1 OK
538[ 199.497203] nfs: server 10.100.1.1 OK
539[ 199.567732] nfs: server 10.100.1.1 OK
540[ 199.616069] nfs: server 10.100.1.1 not responding, still trying
541[ 199.617858] nfs: server 10.100.1.1 not responding, still trying
542[ 199.620079] nfs: server 10.100.1.1 not responding, still trying
543[ 199.621993] nfs: server 10.100.1.1 not responding, still trying
544[ 199.623516] nfs: server 10.100.1.1 not responding, still trying
545[ 199.625349] nfs: server 10.100.1.1 not responding, still trying
546[ 199.627173] nfs: server 10.100.1.1 not responding, still trying
547[ 199.629056] nfs: server 10.100.1.1 not responding, still trying
548[ 199.630831] nfs: server 10.100.1.1 not responding, still trying
549[ 199.632377] nfs: server 10.100.1.1 not responding, still trying
550[ 199.633884] nfs: server 10.100.1.1 OK
551[ 199.691254] nfs: server 10.100.1.1 OK
552[ 200.167043] nfs: server 10.100.1.1 OK
553[ 200.239133] nfs: server 10.100.1.1 OK
554[ 201.199252] nfs: server 10.100.1.1 OK
555[ 201.634600] nfs: server 10.100.1.1 OK
556[ 202.026886] nfs: server 10.100.1.1 OK
557[ 202.103393] nfs: server 10.100.1.1 OK
558[ 202.202033] nfs: server 10.100.1.1 OK
559[ 202.267751] nfs: server 10.100.1.1 OK
560[ 202.317879] nfs: server 10.100.1.1 OK
561[ 202.389315] nfs: server 10.100.1.1 OK
562[ 202.448696] nfs: server 10.100.1.1 OK
563[ 202.499878] nfs: server 10.100.1.1 OK
564[ 202.503603] nfs: server 10.100.1.1 OK
565[ 203.932089] nfs: server 10.100.1.1 not responding, still trying
566[ 204.440169] nfs: server 10.100.1.1 not responding, still trying
567[ 205.400091] nfs: server 10.100.1.1 not responding, still trying
568[ 205.475310] nfs: server 10.100.1.1 OK
569[ 205.551476] nfs: server 10.100.1.1 OK
570[ 206.339818] nfs: server 10.100.1.1 OK