Gitiles
Code Review Sign In
review.coreboot.org / board-status / 699301f85ea01db548de68aee13f301c036e3df3 / . / emulation / qemu-q35 / 4.0-9639-ga9ee61e / 2015-05-11T16:02:14Z / kernel_log.txt
blob: fd701426834b3423363a18de4f56e327b549b9d7 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand62f14362015-05-11 16:43:44 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffaffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffb0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9559-g3905cae-dirty 04/30/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffb0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f5fffff]
42[ 0.000000] [mem 0x1f400000-0x1f5fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f3fffff]
44[ 0.000000] [mem 0x1c000000-0x1f3fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f600000-0x1ffaffff]
49[ 0.000000] [mem 0x1f600000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ffaffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f602000-0x1fe8bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EB0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: APIC 0x000000001FFBAED0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: HPET 0x000000001FFBAF30 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: Local APIC address 0xfee00000
63[ 0.000000] No NUMA configuration found
64[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffaffff]
65[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffaffff]
66[ 0.000000] NODE_DATA [mem 0x1ffab000-0x1ffaffff]
67[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
68[ 0.000000] kvm-clock: cpu 0, msr 0:1ffa3001, primary cpu clock
69[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e600000-ffff88001edfffff] on node 0
70[ 0.000000] Zone ranges:
71[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
72[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
73[ 0.000000] Normal empty
74[ 0.000000] Movable zone start for each node
75[ 0.000000] Early memory node ranges
76[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
77[ 0.000000] node 0: [mem 0x00100000-0x1ffaffff]
78[ 0.000000] On node 0 totalpages: 130894
79[ 0.000000] DMA zone: 56 pages used for memmap
80[ 0.000000] DMA zone: 21 pages reserved
81[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
82[ 0.000000] DMA32 zone: 1735 pages used for memmap
83[ 0.000000] DMA32 zone: 126896 pages, LIFO batch:31
84[ 0.000000] ACPI: PM-Timer IO Port: 0x608
85[ 0.000000] ACPI: Local APIC address 0xfee00000
86[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
87[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
88[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
89[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
91[ 0.000000] ACPI: IRQ0 used by override.
92[ 0.000000] ACPI: IRQ2 used by override.
93[ 0.000000] ACPI: IRQ9 used by override.
94[ 0.000000] Using ACPI (MADT) for SMP configuration information
95[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
96[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
97[ 0.000000] nr_irqs_gsi: 40
98[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
99[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
101[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
102[ 0.000000] Booting paravirtualized kernel on KVM
103[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
104[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f400000 s80896 r8192 d21504 u2097152
105[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
106[ 0.000000] pcpu-alloc: [0] 0
107[ 0.000000] KVM setup async PF for cpu 0
108[ 0.000000] kvm-stealtime: cpu 0, msr 1f40d080
109[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129082
110[ 0.000000] Policy zone: DMA32
111[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
112[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
113[ 0.000000] AGP: Checking aperture...
114[ 0.000000] AGP: No AGP bridge found
115[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
116[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
117[ 0.000000] Memory: 494932K/523576K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
118[ 0.000000] Hierarchical RCU implementation.
119[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
120[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
121[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
122[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
123[ 0.000000] Console: colour VGA+ 80x25
124[ 0.000000] console [tty0] enabled
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008017] ACPI: Core revision 20140424
131[ 0.010583] ACPI: All ACPI Tables successfully acquired
132[ 0.013191] Security Framework initialized
133[ 0.014436] AppArmor: AppArmor disabled by boot time parameter
134[ 0.016004] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.017651] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.019750] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.020117] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.021688] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.024306] Initializing cgroup subsys memory
140[ 0.025515] Initializing cgroup subsys devices
141[ 0.026686] Initializing cgroup subsys freezer
142[ 0.028010] Initializing cgroup subsys net_cls
143[ 0.029281] Initializing cgroup subsys blkio
144[ 0.030492] Initializing cgroup subsys perf_event
145[ 0.032005] Initializing cgroup subsys net_prio
146[ 0.033378] mce: CPU supports 10 MCE banks
147[ 0.034585] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.048659] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.055262] ftrace: allocating 21601 entries in 85 pages
152[ 0.069313] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.070842] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
154[ 0.076000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.076000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.078153] x86: Booted up 1 node, 1 CPUs
157[ 0.079337] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.080602] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.082236] devtmpfs: initialized
160[ 0.090890] pinctrl core: initialized pinctrl subsystem
161[ 0.092106] NET: Registered protocol family 16
162[ 0.093555] cpuidle: using governor ladder
163[ 0.094722] cpuidle: using governor menu
164[ 0.096148] ACPI: bus type PCI registered
165[ 0.097302] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.098987] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.100004] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.102063] PCI: Using configuration type 1 for base access
169[ 0.105102] ACPI: Added _OSI(Module Device)
170[ 0.106330] ACPI: Added _OSI(Processor Device)
171[ 0.108003] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.109230] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.115127] ACPI: Interpreter enabled
174[ 0.116010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.118555] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.120839] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.123375] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.125866] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.128829] ACPI: (supports S0)
180[ 0.129815] ACPI: Using IOAPIC for interrupt routing
181[ 0.131117] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.136429] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.137976] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.140244] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.142589] PCI host bridge to bus 0000:00
186[ 0.143748] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.144012] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.145486] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.148012] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.149590] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.151182] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.151619] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.153586] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.157522] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.172012] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.172230] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.174753] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.177173] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.189213] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.189726] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.190167] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.192027] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.193939] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.206393] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.208014] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.210755] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.210959] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.212501] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.214666] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.220148] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.224146] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.226231] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.228784] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.230875] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.233026] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.235022] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.236637] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.238222] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.239775] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.240765] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.242339] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.244018] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.245638] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.247454] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.248199] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.249619] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.252002] vgaarb: loaded
228[ 0.252970] vgaarb: bridge control possible 0000:00:01.0
229[ 0.254377] PCI: Using ACPI for IRQ routing
230[ 0.311136] PCI: pci_cache_line_size set to 64 bytes
231[ 0.311261] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.311265] e820: reserve RAM buffer [mem 0x1ffb0000-0x1fffffff]
233[ 0.311488] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.312029] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.313668] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.320086] Switched to clocksource kvm-clock
237[ 0.330921] pnp: PnP ACPI init
238[ 0.332363] ACPI: bus type PNP registered
239[ 0.333816] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.333897] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.333962] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.334098] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.334189] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.334572] pnp: PnP ACPI: found 5 devices
245[ 0.335757] ACPI: bus type PNP unregistered
246[ 0.344743] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.346332] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.346335] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.346337] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.346339] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.346379] NET: Registered protocol family 2
252[ 0.347811] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.349576] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.351143] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.352726] TCP: reno registered
256[ 0.353762] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.355149] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.356622] NET: Registered protocol family 1
259[ 0.357857] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.357905] PCI: CLS 64 bytes, default 64
261[ 0.357971] Unpacking initramfs...
262[ 0.561054] Freeing initrd memory: 8744K (ffff88001f602000 - ffff88001fe8c000)
263[ 0.563387] microcode: AMD CPU family 0x6 not supported
264[ 0.565128] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.567074] audit: initializing netlink subsys (disabled)
266[ 0.568507] audit: type=2000 audit(1431362283.764:1): initialized
267[ 0.570538] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.572089] zbud: loaded
269[ 0.573374] VFS: Disk quotas dquot_6.5.2
270[ 0.574521] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.576105] msgmni has been set to 983
272[ 0.577558] alg: No test for stdrng (krng)
273[ 0.578766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.580896] io scheduler noop registered
275[ 0.582046] io scheduler deadline registered
276[ 0.583228] io scheduler cfq registered (default)
277[ 0.584556] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.585990] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.587616] GHES: HEST is not enabled!
280[ 0.588843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.907713] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.910465] Linux agpgart interface v0.103
283[ 0.911784] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.915017] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.916395] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.918258] mousedev: PS/2 mouse device common for all mice
287[ 0.920531] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.923180] rtc_cmos 00:00: RTC can wake from S4
289[ 0.924952] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.927222] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.929892] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.931535] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.933520] AMD IOMMUv2 functionality not available on this system
294[ 0.935539] TCP: cubic registered
295[ 0.936836] NET: Registered protocol family 10
296[ 0.938296] mip6: Mobile IPv6
297[ 0.939290] NET: Registered protocol family 17
298[ 0.940591] mpls_gso: MPLS GSO support
299[ 0.942282] registered taskstats version 1
300[ 0.944182] rtc_cmos 00:00: setting system clock to 2015-05-11 16:38:03 UTC (1431362283)
301[ 0.946442] PM: Hibernation image not present or could not be loaded.
302[ 0.948251] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
303[ 0.950458] Write protecting the kernel read-only data: 8192k
304[ 0.954658] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
305[ 0.957618] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.972281] systemd-udevd[52]: starting version 215
307[ 0.974009] random: systemd-udevd urandom read with 2 bits of entropy available
308[ 0.989588] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 0.991306] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 1.001774] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
311[ 1.392422] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
312[ 1.394127] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
313[ 1.402546] FS-Cache: Loaded
314[ 1.407099] RPC: Registered named UNIX socket transport module.
315[ 1.408652] RPC: Registered udp transport module.
316[ 1.409860] RPC: Registered tcp transport module.
317[ 1.411014] RPC: Registered tcp NFSv4.1 backchannel transport module.
318[ 1.417423] FS-Cache: Netfs 'nfs' registered for caching
319[ 1.428441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
320[ 1.560124] tsc: Refined TSC clocksource calibration: 2312.024 MHz
321[ 3.432812] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
322[ 3.437866] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
323[ 10.826266] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
324[ 10.831721] systemd[1]: Detected virtualization 'kvm'.
325[ 10.833707] systemd[1]: Detected architecture 'x86-64'.
326[ 12.384404] random: nonblocking pool is initialized
327[ 13.313317] systemd[1]: Inserted module 'autofs4'
328[ 13.320997] systemd[1]: Set hostname to <cb-test-tgt>.
329[ 15.942172] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 15.947901] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 15.955939] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
332[ 15.958685] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
333[ 15.960828] systemd[1]: Expecting device dev-ttyS0.device...
334[ 15.963579] systemd[1]: Starting Remote File Systems (Pre).
335[ 15.966949] systemd[1]: Reached target Remote File Systems (Pre).
336[ 15.968523] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
337[ 15.970794] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
338[ 15.973556] systemd[1]: Starting Paths.
339[ 15.976295] systemd[1]: Reached target Paths.
340[ 15.977813] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
341[ 15.982603] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
342[ 15.985728] systemd[1]: Starting Encrypted Volumes.
343[ 15.988819] systemd[1]: Reached target Encrypted Volumes.
344[ 15.990222] systemd[1]: Starting Swap.
345[ 15.992683] systemd[1]: Reached target Swap.
346[ 15.993894] systemd[1]: Starting Root Slice.
347[ 15.996471] systemd[1]: Created slice Root Slice.
348[ 15.997761] systemd[1]: Starting User and Session Slice.
349[ 16.000644] systemd[1]: Created slice User and Session Slice.
350[ 16.002105] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
351[ 16.006563] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
352[ 16.008209] systemd[1]: Starting Delayed Shutdown Socket.
353[ 16.011049] systemd[1]: Listening on Delayed Shutdown Socket.
354[ 16.012491] systemd[1]: Starting Journal Socket (/dev/log).
355[ 16.016736] systemd[1]: Listening on Journal Socket (/dev/log).
356[ 16.018221] systemd[1]: Starting udev Control Socket.
357[ 16.020988] systemd[1]: Listening on udev Control Socket.
358[ 16.022324] systemd[1]: Starting udev Kernel Socket.
359[ 16.025048] systemd[1]: Listening on udev Kernel Socket.
360[ 16.026391] systemd[1]: Starting Journal Socket.
361[ 16.029055] systemd[1]: Listening on Journal Socket.
362[ 16.030323] systemd[1]: Starting System Slice.
363[ 16.032903] systemd[1]: Created slice System Slice.
364[ 16.034171] systemd[1]: Starting system-getty.slice.
365[ 16.036927] systemd[1]: Created slice system-getty.slice.
366[ 16.038272] systemd[1]: Starting system-serial\x2dgetty.slice.
367[ 16.041220] systemd[1]: Created slice system-serial\x2dgetty.slice.
368[ 16.042719] systemd[1]: Starting Increase datagram queue length...
369[ 16.045920] systemd[1]: Mounting Huge Pages File System...
370[ 16.049135] systemd[1]: Mounting POSIX Message Queue File System...
371[ 16.057469] systemd[1]: Starting Create list of required static device nodes for the current kernel...
372[ 16.062812] systemd[1]: Mounting Debug File System...
373[ 16.434741] systemd[1]: Started Set Up Additional Binary Formats.
374[ 18.898143] systemd[1]: Starting Load Kernel Modules...
375[ 18.904635] systemd[1]: Starting udev Coldplug all Devices...
376[ 18.910240] systemd[1]: Starting Slices.
377[ 18.914115] systemd[1]: Reached target Slices.
378[ 18.915370] systemd[1]: Starting Remount Root and Kernel File Systems...
379[ 18.921848] systemd[1]: Started Increase datagram queue length.
380[ 18.925868] systemd[1]: Started Create list of required static device nodes for the current kernel.
381[ 18.933748] systemd[1]: Starting Create Static Device Nodes in /dev...
382[ 18.938044] systemd[1]: Starting Syslog Socket.
383[ 18.940802] systemd[1]: Listening on Syslog Socket.
384[ 18.942140] systemd[1]: Starting Sockets.
385[ 18.945312] systemd[1]: Reached target Sockets.
386[ 18.946581] systemd[1]: Starting Journal Service...
387[ 18.951842] systemd[1]: Started Journal Service.
388[ 24.997015] systemd-udevd[127]: starting version 215
389[ 25.032332] systemd-journald[114]: Received request to flush runtime journal from PID 1
390[ 36.832108] nfs: server 10.100.1.1 not responding, still trying
391[ 36.908087] nfs: server 10.100.1.1 not responding, still trying
392[ 36.911135] nfs: server 10.100.1.1 not responding, still trying
393[ 36.914678] nfs: server 10.100.1.1 not responding, still trying
394[ 36.917773] nfs: server 10.100.1.1 not responding, still trying
395[ 36.921155] nfs: server 10.100.1.1 not responding, still trying
396[ 36.922688] nfs: server 10.100.1.1 not responding, still trying
397[ 36.924686] nfs: server 10.100.1.1 not responding, still trying
398[ 36.926392] nfs: server 10.100.1.1 not responding, still trying
399[ 37.188076] nfs: server 10.100.1.1 not responding, still trying
400[ 37.264072] nfs: server 10.100.1.1 not responding, still trying
401[ 37.336101] nfs: server 10.100.1.1 not responding, still trying
402[ 37.487238] nfs: server 10.100.1.1 OK
403[ 37.561195] nfs: server 10.100.1.1 OK
404[ 37.627616] nfs: server 10.100.1.1 OK
405[ 37.708118] nfs: server 10.100.1.1 OK
406[ 37.789529] nfs: server 10.100.1.1 OK
407[ 37.874209] nfs: server 10.100.1.1 OK
408[ 37.941105] nfs: server 10.100.1.1 OK
409[ 38.003647] nfs: server 10.100.1.1 OK
410[ 38.080230] nfs: server 10.100.1.1 OK
411[ 38.269749] nfs: server 10.100.1.1 OK
412[ 38.319647] nfs: server 10.100.1.1 OK
413[ 38.373218] nfs: server 10.100.1.1 OK
414[ 38.804093] nfs: server 10.100.1.1 not responding, still trying
415[ 39.352102] nfs: server 10.100.1.1 not responding, still trying
416[ 39.355253] nfs: server 10.100.1.1 not responding, still trying
417[ 39.358242] nfs: server 10.100.1.1 not responding, still trying
418[ 39.360851] nfs: server 10.100.1.1 not responding, still trying
419[ 39.363541] nfs: server 10.100.1.1 not responding, still trying
420[ 39.365970] nfs: server 10.100.1.1 not responding, still trying
421[ 39.522633] nfs: server 10.100.1.1 OK
422[ 39.528174] nfs: server 10.100.1.1 not responding, still trying
423[ 39.531060] nfs: server 10.100.1.1 not responding, still trying
424[ 39.580529] nfs: server 10.100.1.1 OK
425[ 39.642855] nfs: server 10.100.1.1 OK
426[ 40.005912] nfs: server 10.100.1.1 OK
427[ 40.069842] nfs: server 10.100.1.1 OK
428[ 40.147842] nfs: server 10.100.1.1 OK
429[ 40.160432] nfs: server 10.100.1.1 OK
430[ 40.165048] nfs: server 10.100.1.1 OK
431[ 40.167311] nfs: server 10.100.1.1 OK
432[ 44.050486] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
433[ 44.056835] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
434[ 44.061061] i801_smbus 0000:00:1f.3: Enabling SMBus device
435[ 44.063410] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
436[ 44.807868] SCSI subsystem initialized
437[ 44.821049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
438[ 44.826117] ACPI: Power Button [PWRF]
439[ 45.279549] libata version 3.00 loaded.
440[ 45.692092] Floppy drive(s): fd0 is 1.44M
441[ 45.709034] FDC 0 is a S82078B
442[ 45.737535] parport_pc 00:03: reported by Plug and Play ACPI
443[ 45.741332] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
444[ 45.956379] input: PC Speaker as /devices/platform/pcspkr/input/input4
445[ 46.239950] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
446[ 46.256834] [drm] Initialized drm 1.1.0 20060810
447[ 46.291083] iTCO_vendor_support: vendor-support=0
448[ 46.383512] ahci 0000:00:1f.2: version 3.0
449[ 46.384475] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
450[ 46.386503] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
451[ 46.390133] ahci 0000:00:1f.2: flags: ncq only
452[ 46.395380] scsi0 : ahci
453[ 46.396842] scsi1 : ahci
454[ 46.398080] scsi2 : ahci
455[ 46.399322] scsi3 : ahci
456[ 46.400832] scsi4 : ahci
457[ 46.402023] scsi5 : ahci
458[ 46.403517] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
459[ 46.405707] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
460[ 46.407782] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
461[ 46.409885] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
462[ 46.412577] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
463[ 46.415426] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
464[ 46.736299] ata5: SATA link down (SStatus 0 SControl 300)
465[ 46.739977] ata6: SATA link down (SStatus 0 SControl 300)
466[ 46.742933] ata2: SATA link down (SStatus 0 SControl 300)
467[ 46.746313] ata3: SATA link down (SStatus 0 SControl 300)
468[ 46.749237] ata1: SATA link down (SStatus 0 SControl 300)
469[ 46.751401] ata4: SATA link down (SStatus 0 SControl 300)
470[ 47.054823] ppdev: user-space parallel port driver
471[ 47.081735] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
472[ 47.085353] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
473[ 47.087785] iTCO_wdt: timeout value out of range, using 30
474[ 47.090572] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
475[ 47.255578] kvm: Nested Virtualization enabled
476[ 94.271051] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
477[ 237.732096] nfs: server 10.100.1.1 not responding, still trying
478[ 237.734915] nfs: server 10.100.1.1 not responding, still trying
479[ 237.737764] nfs: server 10.100.1.1 not responding, still trying
480[ 237.739818] nfs: server 10.100.1.1 not responding, still trying
481[ 237.741652] nfs: server 10.100.1.1 not responding, still trying
482[ 237.743576] nfs: server 10.100.1.1 not responding, still trying
483[ 237.745568] nfs: server 10.100.1.1 not responding, still trying
484[ 237.746719] nfs: server 10.100.1.1 not responding, still trying
485[ 237.747850] nfs: server 10.100.1.1 not responding, still trying
486[ 237.748987] nfs: server 10.100.1.1 not responding, still trying
487[ 237.750075] nfs: server 10.100.1.1 not responding, still trying
488[ 237.751511] nfs: server 10.100.1.1 not responding, still trying
489[ 237.786654] nfs: server 10.100.1.1 OK
490[ 237.866420] nfs: server 10.100.1.1 OK
491[ 237.949480] nfs: server 10.100.1.1 OK
492[ 238.020736] nfs: server 10.100.1.1 OK
493[ 238.098624] nfs: server 10.100.1.1 OK
494[ 238.169770] nfs: server 10.100.1.1 OK
495[ 238.240154] nfs: server 10.100.1.1 OK
496[ 238.312460] nfs: server 10.100.1.1 OK
497[ 238.386488] nfs: server 10.100.1.1 OK
498[ 238.461667] nfs: server 10.100.1.1 OK
499[ 238.521240] nfs: server 10.100.1.1 OK
500[ 238.607386] nfs: server 10.100.1.1 OK
501[ 240.612100] nfs: server 10.100.1.1 not responding, still trying
502[ 240.615546] nfs: server 10.100.1.1 not responding, still trying
503[ 240.618861] nfs: server 10.100.1.1 not responding, still trying
504[ 240.622146] nfs: server 10.100.1.1 not responding, still trying
505[ 240.625081] nfs: server 10.100.1.1 not responding, still trying
506[ 241.439950] nfs: server 10.100.1.1 OK
507[ 241.492871] nfs: server 10.100.1.1 OK
508[ 241.543008] nfs: server 10.100.1.1 OK
509[ 241.602704] nfs: server 10.100.1.1 OK
510[ 241.605415] nfs: server 10.100.1.1 OK
511[ 241.936099] nfs: server 10.100.1.1 not responding, still trying
512[ 241.938835] nfs: server 10.100.1.1 not responding, still trying
513[ 242.036927] nfs: server 10.100.1.1 OK
514[ 242.039176] nfs: server 10.100.1.1 OK
515[ 242.188067] nfs: server 10.100.1.1 not responding, still trying
516[ 242.764494] nfs: server 10.100.1.1 OK
517[ 242.816095] nfs: server 10.100.1.1 not responding, still trying
518[ 242.819174] nfs: server 10.100.1.1 not responding, still trying
519[ 242.822438] nfs: server 10.100.1.1 not responding, still trying
520[ 242.825854] nfs: server 10.100.1.1 not responding, still trying
521[ 242.829076] nfs: server 10.100.1.1 not responding, still trying
522[ 242.832275] nfs: server 10.100.1.1 not responding, still trying
523[ 242.834042] nfs: server 10.100.1.1 not responding, still trying
524[ 242.835486] nfs: server 10.100.1.1 not responding, still trying
525[ 242.837420] nfs: server 10.100.1.1 not responding, still trying
526[ 242.839512] nfs: server 10.100.1.1 not responding, still trying
527[ 243.352065] nfs: server 10.100.1.1 OK
528[ 243.403317] nfs: server 10.100.1.1 OK
529[ 243.454869] nfs: server 10.100.1.1 OK
530[ 243.506887] nfs: server 10.100.1.1 OK
531[ 243.560586] nfs: server 10.100.1.1 OK
532[ 243.606939] nfs: server 10.100.1.1 OK
533[ 243.660798] nfs: server 10.100.1.1 OK
534[ 243.710726] nfs: server 10.100.1.1 OK
535[ 243.760043] nfs: server 10.100.1.1 OK
536[ 243.762664] nfs: server 10.100.1.1 OK