Gitiles
Code Review Sign In
review.coreboot.org / board-status / 699301f85ea01db548de68aee13f301c036e3df3 / . / asus / kfsn4-dre / 4.0-10240-g06f1f8f / 2015-07-07T18:07:49Z / kernel_log.txt
blob: 74fa4caf7d1d80b4da35c8fea71326515a11b8fd [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standd4fca3d2015-07-07 19:44:01 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-10240-g06f1f8f-dirty 07/07/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.856 MHz processor
187[ 0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.71 BogoMIPS (lpj=7639424)
188[ 0.010962] pid_max: default: 32768 minimum: 301
189[ 0.015684] ACPI: Core revision 20140424
190[ 0.022118] ACPI: All ACPI Tables successfully acquired
191[ 0.027619] Security Framework initialized
192[ 0.031797] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037706] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045519] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058853] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068749] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075778] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083739] Initializing cgroup subsys memory
199[ 0.088222] Initializing cgroup subsys devices
200[ 0.092769] Initializing cgroup subsys freezer
201[ 0.097294] Initializing cgroup subsys net_cls
202[ 0.101828] Initializing cgroup subsys blkio
203[ 0.106185] Initializing cgroup subsys perf_event
204[ 0.110990] Initializing cgroup subsys net_prio
205[ 0.115647] tseg: 0000000000
206[ 0.115661] CPU: Physical Processor ID: 0
207[ 0.119781] CPU: Processor Core ID: 0
208[ 0.124578] mce: CPU supports 6 MCE banks
209[ 0.128704] LVT offset 0 assigned for vector 0xf9
210[ 0.133505] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148993] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158130] ftrace: allocating 21601 entries in 85 pages
215[ 0.173627] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219282] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336310] Performance Events: AMD PMU driver.
218[ 0.341034] ... version: 0
219[ 0.345136] ... bit width: 48
220[ 0.349321] ... generic registers: 4
221[ 0.353420] ... value mask: 0000ffffffffffff
222[ 0.358801] ... max period: 00007fffffffffff
223[ 0.364191] ... fixed-purpose events: 0
224[ 0.368293] ... event mask: 000000000000000f
225[ 0.376326] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384665] x86: Booting SMP configuration:
227[ 0.388932] .... node #0, CPUs: #1 #2 #3
228[ 0.433510] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585106] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589535] smpboot: Total of 8 processors activated (30558.05 BogoMIPS)
231[ 0.602136] devtmpfs: initialized
232[ 0.614128] pinctrl core: initialized pinctrl subsystem
233[ 0.619606] NET: Registered protocol family 16
234[ 0.624347] cpuidle: using governor ladder
235[ 0.628512] cpuidle: using governor menu
236[ 0.632519] node 0 link 1: io port [1000, 3fff]
237[ 0.632522] TOM: 00000000c0000000 aka 3072M
238[ 0.636785] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636789] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636792] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636794] TOM2: 0000000180000000 aka 6144M
242[ 0.641142] bus: [bus 00-05] on node 0 link 1
243[ 0.641144] bus: 00 [io 0x0000-0xffff]
244[ 0.641146] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641147] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641253] ACPI: bus type PCI registered
247[ 0.645337] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652014] PCI: Using configuration type 1 for base access
249[ 0.657660] PCI: Using configuration type 1 for extended access
250[ 0.664293] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670653] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676475] mtrr: corrected configuration.
253[ 0.693202] ACPI: Added _OSI(Module Device)
254[ 0.697505] ACPI: Added _OSI(Processor Device)
255[ 0.702030] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706804] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715892] ACPI: Interpreter enabled
258[ 0.719659] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729117] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.748033] ACPI: (supports S0 S1 S5)
262[ 0.751765] ACPI: Using IOAPIC for interrupt routing
263[ 0.756850] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.784391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.790662] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.798979] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.836992] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.847116] PCI host bridge to bus 0000:00
269[ 0.851307] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.856880] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.863145] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.870111] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.877090] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.883369] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.883549] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.883556] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.883687] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.883695] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.883719] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.883723] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.883774] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.883875] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.883889] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.883916] pci 0000:00:02.0: supports D1 D2
285[ 0.883927] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.883993] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.889819] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.889834] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.889866] pci 0000:00:02.1: supports D1 D2
290[ 0.889868] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.889916] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.895729] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.895773] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.895784] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.903009] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.909627] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.916858] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.923574] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.923584] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.923589] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.923594] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.923598] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.923603] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.923608] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.923765] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.923776] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.923786] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.923791] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.923804] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.923819] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.923834] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.924009] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.924107] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.929897] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.929947] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.929997] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.935803] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.935856] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.935940] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.941753] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.941811] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.941875] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.947678] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.947722] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.947779] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.953598] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.953774] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.953890] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.954006] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.954150] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.954303] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.954455] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.954577] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.954717] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.954877] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.955076] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.955101] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.955119] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.955136] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.955171] pci 0000:01:04.0: supports D1 D2
341[ 0.955289] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.960342] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.960345] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.960348] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.960469] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.960498] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.960533] pci 0000:02:00.0: reg 0x30: [mem 0x69400000-0x6940ffff pref]
348[ 0.960644] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.960745] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.970878] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.975937] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.976035] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.976060] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.976177] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.976266] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.986402] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.991464] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.991535] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.996669] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.001758] pci_bus 0000:00: on NUMA node 0
361[ 1.001859] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.008298] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.014737] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.022392] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.030064] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.037721] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.045388] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.051822] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.058252] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.065904] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.073571] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.081255] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.087699] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.094132] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.101791] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.109452] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.117106] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.126230] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.132946] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.139663] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.146387] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.153385] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.158648] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.164434] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.172627] vgaarb: loaded
386[ 1.175420] vgaarb: bridge control possible 0000:01:04.0
387[ 1.180974] PCI: Using ACPI for IRQ routing
388[ 1.185251] PCI: pci_cache_line_size set to 64 bytes
389[ 1.185308] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.185311] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.185641] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.192780] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.198072] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.206801] Switched to clocksource hpet
395[ 1.222445] pnp: PnP ACPI init
396[ 1.225670] ACPI: bus type PNP registered
397[ 1.230286] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.230374] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.230459] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.230555] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.230593] pnp 00:04: [dma 2]
402[ 1.230640] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.230662] pnp: PnP ACPI: found 5 devices
404[ 1.234862] ACPI: bus type PNP unregistered
405[ 1.246922] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69400000-0x6940ffff pref]: no compatible bridge window
406[ 1.257024] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.262066] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.268235] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.275110] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.282450] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.289788] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.294830] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.301697] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.306732] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.313592] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.318648] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.323691] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.323694] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.323696] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.323699] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.323702] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.323705] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.323707] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.323710] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.323713] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.323851] NET: Registered protocol family 2
427[ 1.328803] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.336590] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.344015] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.350698] TCP: reno registered
431[ 1.354023] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.360306] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.367166] NET: Registered protocol family 1
434[ 1.372012] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.378201] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.384179] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.389801] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.395384] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.401046] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.406676] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.412262] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.417922] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.423536] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.429112] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.434774] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.440398] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.445979] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.451641] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.457235] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.457243] PCI: CLS 64 bytes, default 64
451[ 1.457350] Unpacking initramfs...
452[ 1.690284] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.698272] PCI-DMA: Disabling AGP.
454[ 1.703506] PCI-DMA: aperture base @ b4000000 size 65536 KB
455[ 1.709195] PCI-DMA: using GART IOMMU.
456[ 1.713030] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.725479] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.733824] microcode: CPU0: patch_level=0x01000096
459[ 1.738819] microcode: CPU1: patch_level=0x01000096
460[ 1.743836] microcode: CPU2: patch_level=0x01000096
461[ 1.748849] microcode: CPU3: patch_level=0x01000096
462[ 1.753857] microcode: CPU4: patch_level=0x01000096
463[ 1.758855] microcode: CPU5: patch_level=0x01000096
464[ 1.763848] microcode: CPU6: patch_level=0x01000096
465[ 1.769939] microcode: CPU7: patch_level=0x01000096
466[ 1.775025] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.783952] LVT offset 1 assigned for vector 0x400
468[ 1.788848] IBS: LVT offset 1 assigned
469[ 1.792714] perf: AMD IBS detected (0x00000007)
470[ 1.797944] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.804412] audit: initializing netlink subsys (disabled)
472[ 1.809924] audit: type=2000 audit(1436297768.624:1): initialized
473[ 1.816884] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.823391] zbud: loaded
475[ 1.826363] VFS: Disk quotas dquot_6.5.2
476[ 1.830426] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.837067] msgmni has been set to 9945
478[ 1.841518] alg: No test for stdrng (krng)
479[ 1.845809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.853465] io scheduler noop registered
481[ 1.857490] io scheduler deadline registered
482[ 1.861933] io scheduler cfq registered (default)
483[ 1.866942] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.867070] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.867196] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.867309] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.867475] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.867502] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.867528] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.867554] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.867576] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.874647] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.881262] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.881272] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.888312] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.894922] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.894932] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.901975] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.901985] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.909026] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.909058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.914752] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.921587] GHES: HEST is not enabled!
504[ 1.925553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.952339] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.980113] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.988126] Linux agpgart interface v0.103
508[ 1.992534] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.003225] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.008355] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.013701] mousedev: PS/2 mouse device common for all mice
512[ 2.019516] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.024709] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.031208] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.039192] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.045457] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.051971] AMD IOMMUv2 functionality not available on this system
518[ 2.058384] TCP: cubic registered
519[ 2.061944] NET: Registered protocol family 10
520[ 2.066917] mip6: Mobile IPv6
521[ 2.070024] NET: Registered protocol family 17
522[ 2.070347] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.083281] mpls_gso: MPLS GSO support
524[ 2.087951] registered taskstats version 1
525[ 2.092911] rtc_cmos rtc_cmos: setting system clock to 2015-07-07 19:36:10 UTC (1436297770)
526[ 2.101489] PM: Hibernation image not present or could not be loaded.
527[ 2.103310] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.111315] Write protecting the kernel read-only data: 8192k
529[ 2.120620] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.129345] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.153266] systemd-udevd[98]: starting version 215
532[ 2.159106] random: systemd-udevd urandom read with 4 bits of entropy available
533[ 2.188879] ACPI: bus type USB registered
534[ 2.193162] usbcore: registered new interface driver usbfs
535[ 2.198835] usbcore: registered new interface driver hub
536[ 2.204421] usbcore: registered new device driver usb
537[ 2.204517] pps_core: LinuxPPS API ver. 1 registered
538[ 2.204519] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
539[ 2.224452] PTP clock support registered
540[ 2.228782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.235798] tg3.c:v3.137 (May 11, 2014)
542[ 2.239766] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.245795] ehci-pci: EHCI PCI platform driver
544[ 2.245815] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.256374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.256434] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.256451] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.256470] ehci-pci 0000:00:02.1: debug port 1
549[ 2.256519] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.256545] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.266458] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.266533] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.266535] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.266537] usb usb1: Product: EHCI Host Controller
555[ 2.266538] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.266539] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.266751] hub 1-0:1.0: USB hub found
558[ 2.266760] hub 1-0:1.0: 10 ports detected
559[ 2.330217] ohci-pci: OHCI PCI platform driver
560[ 2.334995] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.340691] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.348270] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.369599] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.380053] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.389905] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.397839] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.404740] tg3 0000:03:00.0: enabling device (0004 -> 0006)
568[ 2.408467] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
569[ 2.408469] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
570[ 2.408470] usb usb2: Product: OHCI PCI host controller
571[ 2.408472] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
572[ 2.408473] usb usb2: SerialNumber: 0000:00:02.0
573[ 2.408736] hub 2-0:1.0: USB hub found
574[ 2.408749] hub 2-0:1.0: 10 ports detected
575[ 2.449010] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.506802] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.517222] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.527093] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.535029] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.549298] FS-Cache: Loaded
581[ 2.557171] RPC: Registered named UNIX socket transport module.
582[ 2.563648] RPC: Registered udp transport module.
583[ 2.569729] RPC: Registered tcp transport module.
584[ 2.575825] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.588350] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.606239] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.650412] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.722299] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.726060] Switched to clocksource tsc
590[ 4.244430] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.251091] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.258055] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 10.249343] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 10.263508] systemd[1]: Detected architecture 'x86-64'.
595[ 11.441940] random: nonblocking pool is initialized
596[ 12.183797] systemd[1]: Inserted module 'autofs4'
597[ 12.192175] systemd[1]: Set hostname to <cb-test-tgt>.
598[ 14.795864] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 14.808757] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 14.824292] systemd[1]: Expecting device dev-ttyS0.device...
601[ 14.838246] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 14.846197] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 14.853909] systemd[1]: Starting Remote File Systems (Pre).
604[ 14.870211] systemd[1]: Reached target Remote File Systems (Pre).
605[ 14.876504] systemd[1]: Starting Encrypted Volumes.
606[ 14.890201] systemd[1]: Reached target Encrypted Volumes.
607[ 14.895807] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 14.904027] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 14.912068] systemd[1]: Starting Paths.
610[ 14.926122] systemd[1]: Reached target Paths.
611[ 14.930651] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
612[ 14.954106] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
613[ 14.963689] systemd[1]: Starting Swap.
614[ 14.978095] systemd[1]: Reached target Swap.
615[ 14.982512] systemd[1]: Starting Root Slice.
616[ 14.994074] systemd[1]: Created slice Root Slice.
617[ 14.998931] systemd[1]: Starting User and Session Slice.
618[ 15.014066] systemd[1]: Created slice User and Session Slice.
619[ 15.019937] systemd[1]: Starting Delayed Shutdown Socket.
620[ 15.034097] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 15.039985] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 15.058070] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 15.065175] systemd[1]: Starting Journal Socket (/dev/log).
624[ 15.082062] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 15.088147] systemd[1]: Starting udev Kernel Socket.
626[ 15.102038] systemd[1]: Listening on udev Kernel Socket.
627[ 15.108573] systemd[1]: Starting udev Control Socket.
628[ 15.126047] systemd[1]: Listening on udev Control Socket.
629[ 15.131625] systemd[1]: Starting Journal Socket.
630[ 15.146036] systemd[1]: Listening on Journal Socket.
631[ 15.151177] systemd[1]: Starting System Slice.
632[ 15.166015] systemd[1]: Created slice System Slice.
633[ 15.171024] systemd[1]: Starting system-getty.slice.
634[ 15.186023] systemd[1]: Created slice system-getty.slice.
635[ 15.191575] systemd[1]: Starting system-serial\x2dgetty.slice.
636[ 15.206013] systemd[1]: Created slice system-serial\x2dgetty.slice.
637[ 15.212465] systemd[1]: Starting Increase datagram queue length...
638[ 15.231543] systemd[1]: Mounting Debug File System...
639[ 15.247246] systemd[1]: Mounting POSIX Message Queue File System...
640[ 15.333842] systemd[1]: Starting Load Kernel Modules...
641[ 15.843110] systemd[1]: Started Set Up Additional Binary Formats.
642[ 15.866491] systemd[1]: Starting Create list of required static device nodes for the current kernel...
643[ 15.891220] systemd[1]: Starting udev Coldplug all Devices...
644[ 15.907148] systemd[1]: Mounting Huge Pages File System...
645[ 15.923198] systemd[1]: Starting Slices.
646[ 15.937867] systemd[1]: Reached target Slices.
647[ 15.942675] systemd[1]: Starting Remount Root and Kernel File Systems...
648[ 17.413360] systemd[1]: Started Increase datagram queue length.
649[ 17.420139] systemd[1]: Starting Syslog Socket.
650[ 17.433316] systemd[1]: Listening on Syslog Socket.
651[ 17.438475] systemd[1]: Starting Sockets.
652[ 17.453223] systemd[1]: Reached target Sockets.
653[ 17.457897] systemd[1]: Starting Journal Service...
654[ 17.485289] systemd[1]: Started Journal Service.
655[ 21.105817] systemd-udevd[185]: starting version 215
656[ 21.162111] systemd-journald[170]: Received request to flush runtime journal from PID 1
657[ 31.644464] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
658[ 31.652438] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
659[ 31.907973] EDAC MC: Ver: 3.0.0
660[ 32.200318] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
661[ 32.209176] ACPI: Power Button [PWRB]
662[ 32.213106] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
663[ 32.220664] ACPI: Power Button [PWRF]
664[ 32.384133] MCE: In-kernel MCE decoding enabled.
665[ 32.392038] FDC 0 is a post-1991 82077
666[ 32.436079] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
667[ 32.645343] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
668[ 32.650666] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
669[ 32.895918] SCSI subsystem initialized
670[ 33.063682] AMD64 EDAC driver v3.4.0
671[ 33.067418] EDAC amd64: DRAM ECC enabled.
672[ 33.071537] EDAC amd64: F10h detected (node 0).
673[ 33.076190] EDAC MC: DCT0 chip selects:
674[ 33.076194] EDAC amd64: MC: 0: 0MB 1: 0MB
675[ 33.080990] EDAC amd64: MC: 2: 0MB 3: 0MB
676[ 33.085781] EDAC amd64: MC: 4: 0MB 5: 0MB
677[ 33.090572] EDAC amd64: MC: 6: 1024MB 7: 1024MB
678[ 33.095362] EDAC MC: DCT1 chip selects:
679[ 33.095364] EDAC amd64: MC: 0: 0MB 1: 0MB
680[ 33.100174] EDAC amd64: MC: 2: 0MB 3: 0MB
681[ 33.105001] EDAC amd64: MC: 4: 0MB 5: 0MB
682[ 33.109850] EDAC amd64: MC: 6: 1024MB 7: 1024MB
683[ 33.114689] EDAC amd64: using x4 syndromes.
684[ 33.114994] acpi-cpufreq: overriding BIOS provided _PSD data
685[ 33.124740] EDAC amd64: MCT channel count: 2
686[ 33.129219] EDAC amd64: CS6: Registered DDR2 RAM
687[ 33.133963] EDAC amd64: CS7: Registered DDR2 RAM
688[ 33.138909] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
689[ 33.148764] EDAC amd64: DRAM ECC enabled.
690[ 33.152978] EDAC amd64: F10h detected (node 1).
691[ 33.157664] EDAC MC: DCT0 chip selects:
692[ 33.157668] EDAC amd64: MC: 0: 1024MB 1: 0MB
693[ 33.162468] EDAC amd64: MC: 2: 0MB 3: 0MB
694[ 33.167261] EDAC amd64: MC: 4: 0MB 5: 0MB
695[ 33.172031] EDAC amd64: MC: 6: 0MB 7: 0MB
696[ 33.176805] EDAC MC: DCT1 chip selects:
697[ 33.176807] EDAC amd64: MC: 0: 0MB 1: 0MB
698[ 33.181601] EDAC amd64: MC: 2: 0MB 3: 0MB
699[ 33.186368] EDAC amd64: MC: 4: 0MB 5: 0MB
700[ 33.191163] EDAC amd64: MC: 6: 0MB 7: 0MB
701[ 33.195979] EDAC amd64: using x4 syndromes.
702[ 33.200285] EDAC amd64: MCT channel count: 1
703[ 33.204756] EDAC amd64: CS0: Registered DDR2 RAM
704[ 33.209763] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
705[ 33.219657] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
706[ 33.435809] libata version 3.00 loaded.
707[ 33.516558] input: PC Speaker as /devices/platform/pcspkr/input/input4
708[ 33.562339] pata_amd 0000:00:06.0: version 0.4.1
709[ 33.563240] scsi0 : pata_amd
710[ 33.566587] scsi1 : pata_amd
711[ 33.569680] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
712[ 33.576760] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
713[ 33.836286] sata_nv 0000:00:07.0: version 3.5
714[ 33.836661] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
715[ 33.843569] scsi2 : sata_nv
716[ 33.846713] scsi3 : sata_nv
717[ 33.849742] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
718[ 33.857024] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
719[ 33.864433] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
720[ 33.870710] scsi4 : sata_nv
721[ 33.873794] scsi5 : sata_nv
722[ 33.876767] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
723[ 33.884000] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
724[ 34.175420] ata3: SATA link down (SStatus 0 SControl 300)
725[ 34.199415] ata5: SATA link down (SStatus 0 SControl 300)
726[ 34.397643] kvm: Nested Virtualization enabled
727[ 34.402273] kvm: Nested Paging enabled
728[ 34.491316] ata4: SATA link down (SStatus 0 SControl 300)
729[ 34.807190] ata6: SATA link down (SStatus 0 SControl 300)
730[ 74.435369] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****