Gitiles
Code Review Sign In
review.coreboot.org / board-status / 6526cc6ceb20a0f6e472ddd232055819c0f9492f / . / asus / kfsn4-dre / 4.0-9556-g31769d9 / 2015-04-30T15:50:47Z / kernel_log.txt
blob: ca926e1f394082ac3d5aaee82051ba18f82559cc [file] [log] [blame]
Raptor Engineering Automated Test Stand6526cc62015-04-30 16:14:08 +0000[diff] [blame^]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
12[ 0.000000] NX (Execute Disable) protection: active
13[ 0.000000] SMBIOS 2.7 present.
14[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9556-g31769d9-dirty 04/30/2015
15[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
16[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
17[ 0.000000] AGP: No AGP bridge found
18[ 0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
26[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
27[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
28[ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 0000000160000000 aka 5632M
34[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
35[ 0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
36[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
37[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
38[ 0.000000] Using GB pages for direct mapping
39[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
40[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
41[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
45[ 0.000000] [mem 0x15fe00000-0x15fffffff] page 2M
46[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
48[ 0.000000] [mem 0x15c000000-0x15fdfffff] page 2M
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
50[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
51[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
53[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
54[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
55[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
56[ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
57[ 0.000000] [mem 0xdfe00000-0xdffaafff] page 4k
58[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
59[ 0.000000] ACPI: Early table checksum verification disabled
60[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
61[ 0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
64[ 0.000000] ACPI: FACS 0x00000000DFFB4210 000040
65[ 0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
66[ 0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
91[ 0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
93[ 0.000000] NODE_DATA [mem 0x11fffb000-0x11fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
95[ 0.000000] NODE_DATA [mem 0x15fff9000-0x15fffdfff]
96[ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
97[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
98[ 0.000000] [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
99[ 0.000000] Zone ranges:
100[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
101[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
102[ 0.000000] Normal [mem 0x100000000-0x15fffffff]
103[ 0.000000] Movable zone start for each node
104[ 0.000000] Early memory node ranges
105[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
106[ 0.000000] node 0: [mem 0x00100000-0xdffaafff]
107[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
108[ 0.000000] node 1: [mem 0x120000000-0x15fffffff]
109[ 0.000000] On node 0 totalpages: 1048393
110[ 0.000000] DMA zone: 56 pages used for memmap
111[ 0.000000] DMA zone: 21 pages reserved
112[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
113[ 0.000000] DMA32 zone: 12487 pages used for memmap
114[ 0.000000] DMA32 zone: 913323 pages, LIFO batch:31
115[ 0.000000] Normal zone: 1792 pages used for memmap
116[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
117[ 0.000000] On node 1 totalpages: 262144
118[ 0.000000] Normal zone: 3584 pages used for memmap
119[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
120[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
121[ 0.000000] ACPI: Local APIC address 0xfee00000
122[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
129[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
137[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
138[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
139[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
142[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
143[ 0.000000] ACPI: IRQ9 used by override.
144[ 0.000000] ACPI: IRQ14 used by override.
145[ 0.000000] ACPI: IRQ15 used by override.
146[ 0.000000] Using ACPI (MADT) for SMP configuration information
147[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
148[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
149[ 0.000000] nr_irqs_gsi: 40
150[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
152[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
154[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
155[ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
156[ 0.000000] Booting paravirtualized kernel on bare hardware
157[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
158[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
159[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
160[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
161[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292597
162[ 0.000000] Policy zone: Normal
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
173[ 0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.783 MHz processor
187[ 0.000161] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.56 BogoMIPS (lpj=7639132)
188[ 0.010953] pid_max: default: 32768 minimum: 301
189[ 0.015676] ACPI: Core revision 20140424
190[ 0.022069] ACPI: All ACPI Tables successfully acquired
191[ 0.027576] Security Framework initialized
192[ 0.031753] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037664] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045489] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058789] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068671] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075696] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083659] Initializing cgroup subsys memory
199[ 0.088139] Initializing cgroup subsys devices
200[ 0.092693] Initializing cgroup subsys freezer
201[ 0.097217] Initializing cgroup subsys net_cls
202[ 0.101752] Initializing cgroup subsys blkio
203[ 0.106107] Initializing cgroup subsys perf_event
204[ 0.110905] Initializing cgroup subsys net_prio
205[ 0.115570] tseg: 0000000000
206[ 0.115584] CPU: Physical Processor ID: 0
207[ 0.119704] CPU: Processor Core ID: 0
208[ 0.124511] mce: CPU supports 6 MCE banks
209[ 0.128650] LVT offset 0 assigned for vector 0xf9
210[ 0.133444] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148922] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158057] ftrace: allocating 21601 entries in 85 pages
215[ 0.173522] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219164] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336302] Performance Events: AMD PMU driver.
218[ 0.341027] ... version: 0
219[ 0.345104] ... bit width: 48
220[ 0.349279] ... generic registers: 4
221[ 0.353368] ... value mask: 0000ffffffffffff
222[ 0.358752] ... max period: 00007fffffffffff
223[ 0.364132] ... fixed-purpose events: 0
224[ 0.368209] ... event mask: 000000000000000f
225[ 0.376184] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384493] x86: Booting SMP configuration:
227[ 0.388760] .... node #0, CPUs: #1 #2 #3
228[ 0.433329] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585065] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589493] smpboot: Total of 8 processors activated (30557.52 BogoMIPS)
231[ 0.602140] devtmpfs: initialized
232[ 0.614114] pinctrl core: initialized pinctrl subsystem
233[ 0.619581] NET: Registered protocol family 16
234[ 0.624316] cpuidle: using governor ladder
235[ 0.628488] cpuidle: using governor menu
236[ 0.632494] node 0 link 1: io port [1000, 3fff]
237[ 0.632497] TOM: 00000000e0000000 aka 3584M
238[ 0.636760] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
239[ 0.636764] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636767] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636769] TOM2: 0000000160000000 aka 5632M
242[ 0.641116] bus: [bus 00-05] on node 0 link 1
243[ 0.641119] bus: 00 [io 0x0000-0xffff]
244[ 0.641120] bus: 00 [mem 0xf0000000-0xffffffff]
245[ 0.641122] bus: 00 [mem 0x160000000-0xfcffffffff]
246[ 0.641229] ACPI: bus type PCI registered
247[ 0.645319] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.651991] PCI: Using configuration type 1 for base access
249[ 0.657642] PCI: Using configuration type 1 for extended access
250[ 0.664254] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670618] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676440] mtrr: corrected configuration.
253[ 0.693182] ACPI: Added _OSI(Module Device)
254[ 0.697481] ACPI: Added _OSI(Processor Device)
255[ 0.702006] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706789] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715703] ACPI: Interpreter enabled
258[ 0.719449] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.728932] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738380] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747826] ACPI: (supports S0 S1 S5)
262[ 0.751558] ACPI: Using IOAPIC for interrupt routing
263[ 0.756642] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791809] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.800133] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.839335] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.849457] PCI host bridge to bus 0000:00
269[ 0.853631] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.859186] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.865444] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.872393] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.879347] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.885616] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.885808] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.885816] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.885943] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.885954] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.885979] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.885987] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.886003] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.886107] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.886123] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.886149] pci 0000:00:02.0: supports D1 D2
285[ 0.886161] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.886209] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.892039] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.892052] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.892102] pci 0000:00:02.1: supports D1 D2
290[ 0.892121] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.892190] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.898004] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.898030] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.898058] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.905285] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.911905] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.919138] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.925854] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.925865] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.925870] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.925874] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.925879] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.925883] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.925888] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.926067] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.926077] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.926082] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.926087] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.926091] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.926096] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.926101] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.926273] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.926393] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.932197] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.932247] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.932296] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.938104] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.938159] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.938215] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.944024] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.944064] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.944116] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.949924] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.949974] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.950030] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.955845] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.956020] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.956125] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.956218] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.956360] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.956486] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.956613] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.956756] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.956895] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.957065] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.957251] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.957285] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.957302] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.957317] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.957373] pci 0000:01:04.0: supports D1 D2
341[ 0.957462] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.962524] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.962528] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.962531] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.962654] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.962697] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.962733] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
348[ 0.962824] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.962917] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.973038] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.978100] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.978209] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.978244] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.978346] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.978443] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.988576] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.993632] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.993717] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.998834] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.003916] pci_bus 0000:00: on NUMA node 0
361[ 1.004017] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.010448] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.016856] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.024520] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.032180] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.039848] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.047524] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.053942] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.060408] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.068048] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.075708] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.083393] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.089813] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.096292] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.103939] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.111616] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.119291] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.128409] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.135151] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.141865] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.148578] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.155585] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.160836] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.166620] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.174809] vgaarb: loaded
386[ 1.177595] vgaarb: bridge control possible 0000:01:04.0
387[ 1.183156] PCI: Using ACPI for IRQ routing
388[ 1.187435] PCI: pci_cache_line_size set to 64 bytes
389[ 1.187493] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.187496] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
391[ 1.187811] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.194944] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.200230] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.208954] Switched to clocksource hpet
395[ 1.224493] pnp: PnP ACPI init
396[ 1.227715] ACPI: bus type PNP registered
397[ 1.232348] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.232428] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.232527] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.232606] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.232647] pnp 00:04: [dma 2]
402[ 1.232689] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.232710] pnp: PnP ACPI: found 5 devices
404[ 1.236906] ACPI: bus type PNP unregistered
405[ 1.248987] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
406[ 1.259047] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.264093] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.270277] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.277151] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.284489] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.291850] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.296901] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.303778] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.308820] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.315690] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.320745] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.325796] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.325799] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.325802] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.325805] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.325808] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.325810] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.325813] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.325816] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.325819] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.325950] NET: Registered protocol family 2
427[ 1.330919] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.338700] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.346113] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.352793] TCP: reno registered
431[ 1.356122] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.362396] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.369248] NET: Registered protocol family 1
434[ 1.374077] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.380276] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.386258] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.391874] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.397456] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.403115] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.408762] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.414352] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.420009] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.425615] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.431201] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.436861] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.442477] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.448068] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.453731] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.459341] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.459349] PCI: CLS 64 bytes, default 64
451[ 1.459459] Unpacking initramfs...
452[ 1.692484] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.700450] PCI-DMA: Disabling AGP.
454[ 1.705650] PCI-DMA: aperture base @ d4000000 size 65536 KB
455[ 1.711314] PCI-DMA: using GART IOMMU.
456[ 1.715158] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.727288] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.735628] microcode: CPU0: patch_level=0x01000096
459[ 1.740631] microcode: CPU1: patch_level=0x01000096
460[ 1.745640] microcode: CPU2: patch_level=0x01000096
461[ 1.750650] microcode: CPU3: patch_level=0x01000096
462[ 1.755659] microcode: CPU4: patch_level=0x01000096
463[ 1.760656] microcode: CPU5: patch_level=0x01000096
464[ 1.765650] microcode: CPU6: patch_level=0x01000096
465[ 1.771754] microcode: CPU7: patch_level=0x01000096
466[ 1.776849] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.785812] LVT offset 1 assigned for vector 0x400
468[ 1.790712] IBS: LVT offset 1 assigned
469[ 1.794622] perf: AMD IBS detected (0x00000007)
470[ 1.799852] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.806332] audit: initializing netlink subsys (disabled)
472[ 1.811839] audit: type=2000 audit(1430410411.624:1): initialized
473[ 1.818742] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.825245] zbud: loaded
475[ 1.828201] VFS: Disk quotas dquot_6.5.2
476[ 1.832253] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.838888] msgmni has been set to 9941
478[ 1.843355] alg: No test for stdrng (krng)
479[ 1.847648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.855290] io scheduler noop registered
481[ 1.859320] io scheduler deadline registered
482[ 1.863771] io scheduler cfq registered (default)
483[ 1.868775] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.868904] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.869027] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.869144] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.869294] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.869322] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.869348] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.869373] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.869394] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.876480] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.883096] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.883107] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.890148] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.896760] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.896771] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.903812] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.903824] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.910864] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.910897] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.916575] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.923398] GHES: HEST is not enabled!
504[ 1.927368] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.954075] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.981876] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.989938] Linux agpgart interface v0.103
508[ 1.994352] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.004991] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.010087] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.015426] mousedev: PS/2 mouse device common for all mice
512[ 2.021208] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.026416] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.032930] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.040907] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.047176] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.053722] AMD IOMMUv2 functionality not available on this system
518[ 2.060125] TCP: cubic registered
519[ 2.063669] NET: Registered protocol family 10
520[ 2.068628] mip6: Mobile IPv6
521[ 2.071707] NET: Registered protocol family 17
522[ 2.076327] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.085143] mpls_gso: MPLS GSO support
524[ 2.089877] registered taskstats version 1
525[ 2.094827] rtc_cmos rtc_cmos: setting system clock to 2015-04-30 16:13:33 UTC (1430410413)
526[ 2.103410] PM: Hibernation image not present or could not be loaded.
527[ 2.105240] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.113258] Write protecting the kernel read-only data: 8192k
529[ 2.122597] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.131340] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.151443] systemd-udevd[99]: starting version 215
532[ 2.156983] random: systemd-udevd urandom read with 4 bits of entropy available
533[ 2.179994] ACPI: bus type USB registered
534[ 2.184234] usbcore: registered new interface driver usbfs
535[ 2.184255] pps_core: LinuxPPS API ver. 1 registered
536[ 2.184257] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
537[ 2.204181] usbcore: registered new interface driver hub
538[ 2.209826] usbcore: registered new device driver usb
539[ 2.209841] PTP clock support registered
540[ 2.220538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.227720] tg3.c:v3.137 (May 11, 2014)
542[ 2.231704] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.237638] ehci-pci: EHCI PCI platform driver
544[ 2.237731] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.248246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.248370] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.248388] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.248406] ehci-pci 0000:00:02.1: debug port 1
549[ 2.248454] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.248479] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.256623] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.256701] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.256702] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.256704] usb usb1: Product: EHCI Host Controller
555[ 2.256705] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.256706] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.256968] hub 1-0:1.0: USB hub found
558[ 2.256978] hub 1-0:1.0: 10 ports detected
559[ 2.322105] ohci-pci: OHCI PCI platform driver
560[ 2.326861] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.332563] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.340135] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.371698] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.382159] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.392012] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.399946] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.402640] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
568[ 2.402642] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
569[ 2.402643] usb usb2: Product: OHCI PCI host controller
570[ 2.402645] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
571[ 2.402646] usb usb2: SerialNumber: 0000:00:02.0
572[ 2.402923] hub 2-0:1.0: USB hub found
573[ 2.402935] hub 2-0:1.0: 10 ports detected
574[ 2.445161] tg3 0000:03:00.0: enabling device (0004 -> 0006)
575[ 2.451084] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.500864] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.511260] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.521125] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.529064] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.542285] FS-Cache: Loaded
581[ 2.549465] RPC: Registered named UNIX socket transport module.
582[ 2.556153] RPC: Registered udp transport module.
583[ 2.562196] RPC: Registered tcp transport module.
584[ 2.568299] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.580801] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.594506] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.640619] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.724453] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.728200] Switched to clocksource tsc
590[ 4.232683] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.239357] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.246361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 5.525637] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 5.539823] systemd[1]: Detected architecture 'x86-64'.
595[ 5.750654] systemd[1]: Inserted module 'autofs4'
596[ 5.757425] systemd[1]: Set hostname to <cb-test-tgt>.
597[ 5.780130] random: nonblocking pool is initialized
598[ 6.090303] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 6.103212] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 6.118601] systemd[1]: Expecting device dev-ttyS0.device...
601[ 6.135413] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 6.143402] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 6.151112] systemd[1]: Starting Remote File Systems (Pre).
604[ 6.167377] systemd[1]: Reached target Remote File Systems (Pre).
605[ 6.173739] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
606[ 6.195364] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
607[ 6.205014] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 6.213252] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 6.221333] systemd[1]: Starting Paths.
610[ 6.235286] systemd[1]: Reached target Paths.
611[ 6.239772] systemd[1]: Starting Encrypted Volumes.
612[ 6.255277] systemd[1]: Reached target Encrypted Volumes.
613[ 6.260839] systemd[1]: Starting Swap.
614[ 6.275257] systemd[1]: Reached target Swap.
615[ 6.279653] systemd[1]: Starting Root Slice.
616[ 6.303287] systemd[1]: Created slice Root Slice.
617[ 6.308186] systemd[1]: Starting User and Session Slice.
618[ 6.323253] systemd[1]: Created slice User and Session Slice.
619[ 6.329128] systemd[1]: Starting Delayed Shutdown Socket.
620[ 6.343243] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 6.349130] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 6.367257] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 6.374360] systemd[1]: Starting Journal Socket (/dev/log).
624[ 6.391223] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 6.397293] systemd[1]: Starting Syslog Socket.
626[ 6.411246] systemd[1]: Listening on Syslog Socket.
627[ 6.417368] systemd[1]: Starting udev Kernel Socket.
628[ 6.431205] systemd[1]: Listening on udev Kernel Socket.
629[ 6.436670] systemd[1]: Starting udev Control Socket.
630[ 6.451208] systemd[1]: Listening on udev Control Socket.
631[ 6.456745] systemd[1]: Starting Journal Socket.
632[ 6.471189] systemd[1]: Listening on Journal Socket.
633[ 6.476340] systemd[1]: Starting Sockets.
634[ 6.491186] systemd[1]: Reached target Sockets.
635[ 6.495881] systemd[1]: Starting System Slice.
636[ 6.511174] systemd[1]: Created slice System Slice.
637[ 6.516187] systemd[1]: Starting system-getty.slice.
638[ 6.531172] systemd[1]: Created slice system-getty.slice.
639[ 6.536721] systemd[1]: Starting system-serial\x2dgetty.slice.
640[ 6.551198] systemd[1]: Created slice system-serial\x2dgetty.slice.
641[ 6.558110] systemd[1]: Starting Create list of required static device nodes for the current kernel...
642[ 6.580319] systemd[1]: Mounting Debug File System...
643[ 6.604899] systemd[1]: Started Set Up Additional Binary Formats.
644[ 6.611146] systemd[1]: Mounting Huge Pages File System...
645[ 6.656333] systemd[1]: Starting Load Kernel Modules...
646[ 6.673107] systemd[1]: Mounting POSIX Message Queue File System...
647[ 6.693054] systemd[1]: Starting udev Coldplug all Devices...
648[ 6.708868] systemd[1]: Starting Journal Service...
649[ 6.735200] systemd[1]: Started Journal Service.
650[ 7.184911] systemd-udevd[186]: starting version 215
651[ 7.474351] systemd-journald[169]: Received request to flush runtime journal from PID 1
652[ 8.113210] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
653[ 8.121254] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
654[ 8.130975] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
655[ 8.139457] ACPI: Power Button [PWRB]
656[ 8.143482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
657[ 8.151042] ACPI: Power Button [PWRF]
658[ 8.155083] EDAC MC: Ver: 3.0.0
659[ 8.182590] FDC 0 is a post-1991 82077
660[ 8.203151] SCSI subsystem initialized
661[ 8.203155] MCE: In-kernel MCE decoding enabled.
662[ 8.261033] acpi-cpufreq: overriding BIOS provided _PSD data
663[ 8.295973] libata version 3.00 loaded.
664[ 8.297042] AMD64 EDAC driver v3.4.0
665[ 8.306290] input: PC Speaker as /devices/platform/pcspkr/input/input4
666[ 8.310691] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
667[ 8.310719] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
668[ 8.408848] kvm: Nested Virtualization enabled
669[ 8.413532] kvm: Nested Paging enabled
670[ 11.541404] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
671[ 11.546946] EDAC amd64: DRAM ECC enabled.
672[ 11.546970] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
673[ 11.557886] EDAC amd64: F10h detected (node 0).
674[ 11.562581] EDAC MC: DCT0 chip selects:
675[ 11.562584] EDAC amd64: MC: 0: 0MB 1: 0MB
676[ 11.567412] EDAC amd64: MC: 2: 0MB 3: 0MB
677[ 11.572196] EDAC amd64: MC: 4: 0MB 5: 0MB
678[ 11.576995] EDAC amd64: MC: 6: 1024MB 7: 1024MB
679[ 11.581793] EDAC MC: DCT1 chip selects:
680[ 11.581796] EDAC amd64: MC: 0: 0MB 1: 0MB
681[ 11.586577] EDAC amd64: MC: 2: 0MB 3: 0MB
682[ 11.591353] EDAC amd64: MC: 4: 0MB 5: 0MB
683[ 11.596148] EDAC amd64: MC: 6: 1024MB 7: 1024MB
684[ 11.600918] EDAC amd64: using x4 syndromes.
685[ 11.605185] EDAC amd64: MCT channel count: 2
686[ 11.609618] EDAC amd64: CS6: Registered DDR2 RAM
687[ 11.614355] EDAC amd64: CS7: Registered DDR2 RAM
688[ 11.619489] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
689[ 11.629407] sata_nv 0000:00:07.0: version 3.5
690[ 11.629837] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
691[ 11.636547] scsi0 : sata_nv
692[ 11.639727] scsi1 : sata_nv
693[ 11.642714] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
694[ 11.649984] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
695[ 11.657477] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
696[ 11.663796] scsi2 : sata_nv
697[ 11.666875] scsi3 : sata_nv
698[ 11.669850] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
699[ 11.677082] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
700[ 11.684410] pata_amd 0000:00:06.0: version 0.4.1
701[ 11.685145] scsi4 : pata_amd
702[ 11.688323] scsi5 : pata_amd
703[ 11.691416] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
704[ 11.698481] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
705[ 11.705664] EDAC amd64: DRAM ECC enabled.
706[ 11.709930] EDAC amd64: F10h detected (node 1).
707[ 11.714635] EDAC MC: DCT0 chip selects:
708[ 11.714639] EDAC amd64: MC: 0: 1024MB 1: 0MB
709[ 11.719450] EDAC amd64: MC: 2: 0MB 3: 0MB
710[ 11.724263] EDAC amd64: MC: 4: 0MB 5: 0MB
711[ 11.729066] EDAC amd64: MC: 6: 0MB 7: 0MB
712[ 11.733871] EDAC MC: DCT1 chip selects:
713[ 11.733875] EDAC amd64: MC: 0: 0MB 1: 0MB
714[ 11.738659] EDAC amd64: MC: 2: 0MB 3: 0MB
715[ 11.743439] EDAC amd64: MC: 4: 0MB 5: 0MB
716[ 11.743446] EDAC amd64: MC: 6: 0MB 7: 0MB
717[ 11.743448] EDAC amd64: using x4 syndromes.
718[ 11.743449] EDAC amd64: MCT channel count: 1
719[ 11.743558] EDAC amd64: CS0: Registered DDR2 RAM
720[ 11.743795] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
721[ 11.743884] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
722[ 11.969262] ata1: SATA link down (SStatus 0 SControl 300)
723[ 11.993261] ata3: SATA link down (SStatus 0 SControl 300)
724[ 12.285154] ata2: SATA link down (SStatus 0 SControl 300)
725[ 12.601037] ata4: SATA link down (SStatus 0 SControl 300)