Gitiles
Code Review Sign In
review.coreboot.org / board-status / 5fea319634d538c282c662523e3f76e45bc05035 / . / emulation / qemu-q35 / 4.0-10267-g72dd909 / 2015-07-10T00:11:47Z / kernel_log.txt
blob: 7e3dc835d1feb9436bb007a0fdd6e79df24fe90c [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standf452cf82015-07-10 01:42:49 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9991-g4d6db95-dirty 06/13/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
42[ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
44[ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFBAED0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFBAF10 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFBAF70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [tty0] enabled
126[ 0.000000] console [ttyS0] enabled
127[ 0.000000] hpet clockevent registered
128[ 0.000000] tsc: Detected 2311.846 MHz processor
129[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
Raptor Engineering Automated Coreboot Test Stand5fea3192015-07-10 06:18:45 +0000[diff] [blame^]130[ 0.008013] pid_max: default: 32768 minimum: 301
131[ 0.009438] ACPI: Core revision 20140424
132[ 0.012442] ACPI: All ACPI Tables successfully acquired
133[ 0.014662] Security Framework initialized
134[ 0.016015] AppArmor: AppArmor disabled by boot time parameter
135[ 0.017985] Yama: disabled by default; enable with sysctl kernel.yama.*
136[ 0.020085] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
137[ 0.022212] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
138[ 0.024111] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.025987] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
140[ 0.028269] Initializing cgroup subsys memory
141[ 0.029689] Initializing cgroup subsys devices
142[ 0.031082] Initializing cgroup subsys freezer
143[ 0.032008] Initializing cgroup subsys net_cls
144[ 0.033359] Initializing cgroup subsys blkio
145[ 0.034679] Initializing cgroup subsys perf_event
146[ 0.036014] Initializing cgroup subsys net_prio
147[ 0.037507] mce: CPU supports 10 MCE banks
148[ 0.040086] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Raptor Engineering Automated Coreboot Test Standf452cf82015-07-10 01:42:49 +0000[diff] [blame]149Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
150tlb_flushall_shift: -1
Raptor Engineering Automated Coreboot Test Stand5fea3192015-07-10 06:18:45 +0000[diff] [blame^]151[ 0.053205] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
152[ 0.064360] ftrace: allocating 21601 entries in 85 pages
153[ 0.073732] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
154[ 0.075446] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
Raptor Engineering Automated Coreboot Test Standf452cf82015-07-10 01:42:49 +0000[diff] [blame]155[ 0.080000] Performance Events: Broken PMU hardware detected, using software events only.
156[ 0.080000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
Raptor Engineering Automated Coreboot Test Stand5fea3192015-07-10 06:18:45 +0000[diff] [blame^]157[ 0.082053] x86: Booted up 1 node, 1 CPUs
158[ 0.083356] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
159[ 0.084569] NMI watchdog: disabled (cpu0): hardware events not enabled
160[ 0.088098] devtmpfs: initialized
161[ 0.095604] pinctrl core: initialized pinctrl subsystem
162[ 0.096095] NET: Registered protocol family 16
163[ 0.097703] cpuidle: using governor ladder
164[ 0.100008] cpuidle: using governor menu
165[ 0.101409] ACPI: bus type PCI registered
166[ 0.102710] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
167[ 0.104157] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
168[ 0.106882] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
169[ 0.108486] PCI: Using configuration type 1 for base access
170[ 0.112508] ACPI: Added _OSI(Module Device)
171[ 0.113850] ACPI: Added _OSI(Processor Device)
172[ 0.115280] ACPI: Added _OSI(3.0 _SCP Extensions)
173[ 0.116005] ACPI: Added _OSI(Processor Aggregator Device)
174[ 0.123695] ACPI: Interpreter enabled
175[ 0.124015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
176[ 0.126936] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
177[ 0.130053] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
178[ 0.132923] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
179[ 0.136003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
180[ 0.138888] ACPI: (supports S0)
181[ 0.140012] ACPI: Using IOAPIC for interrupt routing
182[ 0.141511] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
183[ 0.146760] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
184[ 0.148008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
185[ 0.152025] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
186[ 0.154607] PCI host bridge to bus 0000:00
187[ 0.155905] pci_bus 0000:00: root bus resource [bus 00-ff]
188[ 0.156013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
189[ 0.157727] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
190[ 0.160012] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
191[ 0.161854] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
192[ 0.164049] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
193[ 0.164563] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
194[ 0.168008] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
195[ 0.171023] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
196[ 0.185268] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
197[ 0.185473] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
198[ 0.188007] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
199[ 0.190735] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
200[ 0.204007] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
201[ 0.204476] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
202[ 0.204909] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
203[ 0.208026] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
204[ 0.212248] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
205[ 0.225204] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
206[ 0.227683] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
207[ 0.229605] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
208[ 0.229793] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
209[ 0.230390] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
210[ 0.233316] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
211[ 0.236130] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
212[ 0.238402] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
213[ 0.240695] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
214[ 0.242927] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
215[ 0.245171] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
216[ 0.247472] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
217[ 0.249253] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
218[ 0.251042] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
219[ 0.252779] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
220[ 0.254536] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
221[ 0.256785] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
222[ 0.258534] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
223[ 0.260019] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
224[ 0.261766] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
225[ 0.264255] ACPI: Enabled 16 GPEs in block 00 to 3F
226[ 0.266044] vgaarb: setting as boot device: PCI:0000:00:01.0
227[ 0.267612] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
228[ 0.268003] vgaarb: loaded
229[ 0.268983] vgaarb: bridge control possible 0000:00:01.0
230[ 0.272081] PCI: Using ACPI for IRQ routing
231[ 0.363396] PCI: pci_cache_line_size set to 64 bytes
232[ 0.363502] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
233[ 0.363505] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
234[ 0.363711] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
235[ 0.364020] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
236[ 0.365867] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
237[ 0.375295] Switched to clocksource kvm-clock
238[ 0.381960] pnp: PnP ACPI init
239[ 0.383306] ACPI: bus type PNP registered
240[ 0.384928] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
241[ 0.385015] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
242[ 0.385088] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
243[ 0.385237] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
244[ 0.385335] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
245[ 0.385747] pnp: PnP ACPI: found 5 devices
246[ 0.387248] ACPI: bus type PNP unregistered
247[ 0.397379] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
248[ 0.399082] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
249[ 0.399085] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
250[ 0.399087] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
251[ 0.399089] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
252[ 0.399125] NET: Registered protocol family 2
253[ 0.400664] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
254[ 0.402525] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
255[ 0.404286] TCP: Hash tables configured (established 4096 bind 4096)
256[ 0.406681] TCP: reno registered
257[ 0.409377] UDP hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.413373] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
259[ 0.415777] NET: Registered protocol family 1
260[ 0.417155] pci 0000:00:01.0: Video device with shadowed ROM
261[ 0.417201] PCI: CLS 64 bytes, default 64
262[ 0.417262] Unpacking initramfs...
263[ 0.618502] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000)
264[ 0.621103] microcode: AMD CPU family 0x6 not supported
265[ 0.622914] futex hash table entries: 256 (order: 2, 16384 bytes)
266[ 0.624641] audit: initializing netlink subsys (disabled)
267[ 0.626800] audit: type=2000 audit(1436508639.541:1): initialized
268[ 0.628991] HugeTLB registered 2 MB page size, pre-allocated 0 pages
269[ 0.630729] zbud: loaded
270[ 0.631843] VFS: Disk quotas dquot_6.5.2
271[ 0.633125] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
272[ 0.634932] msgmni has been set to 983
273[ 0.636472] alg: No test for stdrng (krng)
274[ 0.637803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
275[ 0.640242] io scheduler noop registered
276[ 0.641555] io scheduler deadline registered
277[ 0.642985] io scheduler cfq registered (default)
278[ 0.644550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
279[ 0.646212] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
280[ 0.648176] GHES: HEST is not enabled!
281[ 0.649528] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
282[ 0.674387] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
283[ 0.677174] Linux agpgart interface v0.103
284[ 0.678612] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
285[ 0.682090] serio: i8042 KBD port at 0x60,0x64 irq 1
286[ 0.683561] serio: i8042 AUX port at 0x60,0x64 irq 12
287[ 0.685181] mousedev: PS/2 mouse device common for all mice
288[ 0.687177] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
289[ 0.690030] rtc_cmos 00:00: RTC can wake from S4
290[ 0.691781] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
291[ 0.693727] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
292[ 0.696169] ledtrig-cpu: registered to indicate activity on CPUs
293[ 0.697924] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
294[ 0.699676] AMD IOMMUv2 functionality not available on this system
295[ 0.701494] TCP: cubic registered
296[ 0.702656] NET: Registered protocol family 10
297[ 0.704244] mip6: Mobile IPv6
298[ 0.705334] NET: Registered protocol family 17
299[ 0.706698] mpls_gso: MPLS GSO support
300[ 0.708191] registered taskstats version 1
301[ 0.709888] rtc_cmos 00:00: setting system clock to 2015-07-10 06:10:39 UTC (1436508639)
302[ 0.712415] PM: Hibernation image not present or could not be loaded.
303[ 0.714173] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
304[ 0.716689] Write protecting the kernel read-only data: 8192k
305[ 0.721084] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
306[ 0.724221] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
307[ 0.736202] systemd-udevd[52]: starting version 215
308[ 0.738009] random: systemd-udevd urandom read with 2 bits of entropy available
309[ 0.751976] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
310[ 0.753992] e1000: Copyright (c) 1999-2006 Intel Corporation.
311[ 0.765352] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
312[ 1.155323] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
313[ 1.157212] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
314[ 1.166395] FS-Cache: Loaded
315[ 1.171039] RPC: Registered named UNIX socket transport module.
316[ 1.172737] RPC: Registered udp transport module.
317[ 1.174121] RPC: Registered tcp transport module.
318[ 1.175513] RPC: Registered tcp NFSv4.1 backchannel transport module.
319[ 1.181720] FS-Cache: Netfs 'nfs' registered for caching
320[ 1.193885] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
321[ 1.620173] tsc: Refined TSC clocksource calibration: 2312.023 MHz
322[ 3.196705] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
323[ 3.201352] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
324[ 13.614558] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
325[ 13.621353] systemd[1]: Detected virtualization 'kvm'.
326[ 13.624270] systemd[1]: Detected architecture 'x86-64'.
327[ 15.010075] random: nonblocking pool is initialized
328[ 16.380812] systemd[1]: Inserted module 'autofs4'
329[ 16.388198] systemd[1]: Set hostname to <cb-test-tgt>.
330[ 24.545330] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
331[ 24.552054] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
332[ 24.560832] systemd[1]: Expecting device dev-ttyS0.device...
333[ 24.563852] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
334[ 24.566288] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
335[ 24.568680] systemd[1]: Starting Remote File Systems (Pre).
336[ 24.571917] systemd[1]: Reached target Remote File Systems (Pre).
337[ 24.573640] systemd[1]: Starting Encrypted Volumes.
338[ 24.576665] systemd[1]: Reached target Encrypted Volumes.
339[ 24.578220] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
340[ 24.580936] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
341[ 24.583358] systemd[1]: Starting Paths.
342[ 24.586151] systemd[1]: Reached target Paths.
343[ 24.587516] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
344[ 24.592755] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
345[ 24.598180] systemd[1]: Starting Swap.
346[ 24.603003] systemd[1]: Reached target Swap.
347[ 24.605557] systemd[1]: Starting Root Slice.
348[ 24.609138] systemd[1]: Created slice Root Slice.
349[ 24.610534] systemd[1]: Starting Delayed Shutdown Socket.
350[ 24.614844] systemd[1]: Listening on Delayed Shutdown Socket.
351[ 24.616676] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
352[ 24.622255] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
353[ 24.624117] systemd[1]: Starting Journal Socket (/dev/log).
354[ 24.646746] systemd[1]: Listening on Journal Socket (/dev/log).
355[ 24.648465] systemd[1]: Starting udev Kernel Socket.
356[ 24.651471] systemd[1]: Listening on udev Kernel Socket.
357[ 24.653050] systemd[1]: Starting udev Control Socket.
358[ 24.656170] systemd[1]: Listening on udev Control Socket.
359[ 24.657711] systemd[1]: Starting User and Session Slice.
360[ 24.660897] systemd[1]: Created slice User and Session Slice.
361[ 24.662494] systemd[1]: Starting Journal Socket.
362[ 24.665437] systemd[1]: Listening on Journal Socket.
363[ 24.666914] systemd[1]: Starting System Slice.
364[ 24.669890] systemd[1]: Created slice System Slice.
365[ 24.671397] systemd[1]: Starting Increase datagram queue length...
366[ 24.675172] systemd[1]: Mounting Debug File System...
367[ 24.679182] systemd[1]: Mounting POSIX Message Queue File System...
368[ 24.815463] systemd[1]: Starting Load Kernel Modules...
369[ 25.424891] systemd[1]: Started Set Up Additional Binary Formats.
370[ 25.442771] systemd[1]: Starting Create list of required static device nodes for the current kernel...
371[ 25.449683] systemd[1]: Starting udev Coldplug all Devices...
372[ 25.454015] systemd[1]: Mounting Huge Pages File System...
373[ 25.458197] systemd[1]: Starting system-getty.slice.
374[ 25.462216] systemd[1]: Created slice system-getty.slice.
375[ 25.463799] systemd[1]: Starting system-serial\x2dgetty.slice.
376[ 25.467554] systemd[1]: Created slice system-serial\x2dgetty.slice.
377[ 25.469363] systemd[1]: Starting Slices.
378[ 25.472125] systemd[1]: Reached target Slices.
379[ 25.473496] systemd[1]: Starting Remount Root and Kernel File Systems...
380[ 27.537002] systemd[1]: Started Increase datagram queue length.
381[ 27.540299] systemd[1]: Starting Syslog Socket.
382[ 27.544582] systemd[1]: Listening on Syslog Socket.
383[ 27.546875] systemd[1]: Starting Sockets.
384[ 27.549872] systemd[1]: Reached target Sockets.
385[ 27.551453] systemd[1]: Starting Journal Service...
386[ 27.556767] systemd[1]: Started Journal Service.
387[ 35.645900] systemd-udevd[125]: starting version 215
388[ 48.132077] nfs: server 10.100.1.1 not responding, still trying
389[ 48.135333] nfs: server 10.100.1.1 not responding, still trying
390[ 48.139165] nfs: server 10.100.1.1 not responding, still trying
391[ 48.140925] nfs: server 10.100.1.1 not responding, still trying
392[ 48.142645] nfs: server 10.100.1.1 not responding, still trying
393[ 48.144446] nfs: server 10.100.1.1 not responding, still trying
394[ 48.146141] nfs: server 10.100.1.1 not responding, still trying
395[ 48.147829] nfs: server 10.100.1.1 not responding, still trying
396[ 48.149655] nfs: server 10.100.1.1 not responding, still trying
397[ 48.151312] nfs: server 10.100.1.1 not responding, still trying
398[ 48.153016] nfs: server 10.100.1.1 not responding, still trying
399[ 48.154677] nfs: server 10.100.1.1 not responding, still trying
400[ 48.185909] nfs: server 10.100.1.1 OK
401[ 48.242190] nfs: server 10.100.1.1 OK
402[ 48.301733] nfs: server 10.100.1.1 OK
403[ 48.366974] nfs: server 10.100.1.1 OK
404[ 48.412912] nfs: server 10.100.1.1 OK
405[ 48.478278] nfs: server 10.100.1.1 OK
406[ 48.537943] nfs: server 10.100.1.1 OK
407[ 48.594077] nfs: server 10.100.1.1 OK
408[ 48.671774] nfs: server 10.100.1.1 OK
409[ 48.748698] nfs: server 10.100.1.1 OK
410[ 48.819462] nfs: server 10.100.1.1 OK
411[ 48.829967] nfs: server 10.100.1.1 OK
412[ 49.196102] nfs: server 10.100.1.1 not responding, still trying
413[ 49.204795] nfs: server 10.100.1.1 not responding, still trying
414[ 49.260130] nfs: server 10.100.1.1 not responding, still trying
415[ 49.262186] nfs: server 10.100.1.1 not responding, still trying
416[ 49.265378] nfs: server 10.100.1.1 not responding, still trying
417[ 49.267864] nfs: server 10.100.1.1 not responding, still trying
418[ 49.269782] nfs: server 10.100.1.1 not responding, still trying
419[ 49.271564] nfs: server 10.100.1.1 not responding, still trying
420[ 49.273834] nfs: server 10.100.1.1 not responding, still trying
421[ 49.275707] nfs: server 10.100.1.1 not responding, still trying
422[ 50.228083] nfs: server 10.100.1.1 not responding, still trying
423[ 50.312073] nfs: server 10.100.1.1 not responding, still trying
424[ 50.340822] nfs: server 10.100.1.1 OK
425[ 50.424959] nfs: server 10.100.1.1 OK
426[ 50.427087] nfs: server 10.100.1.1 OK
427[ 50.506271] nfs: server 10.100.1.1 OK
428[ 50.578219] nfs: server 10.100.1.1 OK
429[ 50.629833] nfs: server 10.100.1.1 OK
430[ 50.692947] nfs: server 10.100.1.1 OK
431[ 50.761946] nfs: server 10.100.1.1 OK
432[ 50.823988] nfs: server 10.100.1.1 OK
433[ 50.917858] nfs: server 10.100.1.1 OK
434[ 51.430404] nfs: server 10.100.1.1 OK
435[ 52.208105] nfs: server 10.100.1.1 not responding, still trying
436[ 52.239797] nfs: server 10.100.1.1 OK
437[ 52.568084] nfs: server 10.100.1.1 not responding, still trying
438[ 52.572438] nfs: server 10.100.1.1 not responding, still trying
439[ 52.576734] nfs: server 10.100.1.1 not responding, still trying
440[ 52.580240] nfs: server 10.100.1.1 not responding, still trying
441[ 52.582194] nfs: server 10.100.1.1 not responding, still trying
442[ 52.584522] nfs: server 10.100.1.1 not responding, still trying
443[ 52.740061] nfs: server 10.100.1.1 not responding, still trying
444[ 52.741806] nfs: server 10.100.1.1 not responding, still trying
445[ 52.788092] nfs: server 10.100.1.1 OK
446[ 53.688656] nfs: server 10.100.1.1 OK
447[ 53.691323] nfs: server 10.100.1.1 OK
448[ 53.739128] nfs: server 10.100.1.1 OK
449[ 53.817498] nfs: server 10.100.1.1 OK
450[ 53.872398] nfs: server 10.100.1.1 OK
451[ 53.940603] nfs: server 10.100.1.1 OK
452[ 54.018808] nfs: server 10.100.1.1 OK
453[ 54.063275] nfs: server 10.100.1.1 OK
454[ 54.540084] nfs: server 10.100.1.1 not responding, still trying
455[ 54.628088] nfs: server 10.100.1.1 not responding, still trying
456[ 54.708087] nfs: server 10.100.1.1 not responding, still trying
457[ 54.710920] nfs: server 10.100.1.1 not responding, still trying
458[ 54.714078] nfs: server 10.100.1.1 not responding, still trying
459[ 54.716712] nfs: server 10.100.1.1 not responding, still trying
460[ 54.718900] nfs: server 10.100.1.1 not responding, still trying
461[ 54.721322] nfs: server 10.100.1.1 not responding, still trying
462[ 54.723525] nfs: server 10.100.1.1 not responding, still trying
463[ 55.632086] nfs: server 10.100.1.1 not responding, still trying
464[ 55.646887] nfs: server 10.100.1.1 OK
465[ 55.649772] nfs: server 10.100.1.1 OK
466[ 55.721064] nfs: server 10.100.1.1 OK
467[ 55.723789] nfs: server 10.100.1.1 OK
468[ 55.782761] nfs: server 10.100.1.1 OK
469[ 56.022941] nfs: server 10.100.1.1 OK
470[ 56.104601] nfs: server 10.100.1.1 OK
471[ 56.167646] nfs: server 10.100.1.1 OK
472[ 56.173192] nfs: server 10.100.1.1 OK
473[ 56.334973] nfs: server 10.100.1.1 OK
474[ 56.988102] nfs: server 10.100.1.1 not responding, still trying
475[ 57.354302] nfs: server 10.100.1.1 OK
476[ 58.403483] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
477[ 58.408346] ACPI: Power Button [PWRF]
478[ 58.845992] Floppy drive(s): fd0 is 1.44M
479[ 58.868778] FDC 0 is a S82078B
480[ 59.177655] SCSI subsystem initialized
481[ 59.231846] parport_pc 00:03: reported by Plug and Play ACPI
482[ 59.237720] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
483[ 59.395748] input: PC Speaker as /devices/platform/pcspkr/input/input3
484[ 59.577513] libata version 3.00 loaded.
485[ 60.086756] [drm] Initialized drm 1.1.0 20060810
486[ 60.202676] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
487[ 60.212323] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
488[ 60.214285] i801_smbus 0000:00:1f.3: Enabling SMBus device
489[ 60.215892] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
490[ 60.414861] ahci 0000:00:1f.2: version 3.0
491[ 60.417456] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
492[ 60.419010] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
493[ 60.424181] ahci 0000:00:1f.2: flags: ncq only
494[ 60.434719] scsi0 : ahci
495[ 60.436909] scsi1 : ahci
496[ 60.438624] scsi2 : ahci
497[ 60.441397] ppdev: user-space parallel port driver
498[ 60.443506] scsi3 : ahci
499[ 60.444935] scsi4 : ahci
500[ 60.446110] scsi5 : ahci
501[ 60.447278] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
502[ 60.449630] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
503[ 60.451984] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
504[ 60.454430] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
505[ 60.456990] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
506[ 60.459604] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
507[ 60.780298] ata1: SATA link down (SStatus 0 SControl 300)
508[ 60.783540] ata2: SATA link down (SStatus 0 SControl 300)
509[ 60.786778] ata5: SATA link down (SStatus 0 SControl 300)
510[ 60.790372] ata4: SATA link down (SStatus 0 SControl 300)
511[ 60.793866] ata6: SATA link down (SStatus 0 SControl 300)
512[ 60.797660] ata3: SATA link down (SStatus 0 SControl 300)
513[ 61.076676] iTCO_vendor_support: vendor-support=0
514[ 61.102352] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
515[ 61.107056] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
516[ 61.110376] iTCO_wdt: timeout value out of range, using 30
517[ 61.115567] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
518[ 61.118443] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
519[ 61.201543] kvm: Nested Virtualization enabled
520[ 66.711842] Key type dns_resolver registered
521[ 67.439647] NFS: Registering the id_resolver key type
522[ 67.442324] Key type id_resolver registered
523[ 67.444912] Key type id_legacy registered
524[ 70.630517] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
525[ 103.842752] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
526[ 151.940651] systemd-journald[110]: Received request to flush runtime journal from PID 1
527[ 363.268080] nfs: server 10.100.1.1 not responding, still trying
528[ 363.271032] nfs: server 10.100.1.1 not responding, still trying
529[ 363.275405] nfs: server 10.100.1.1 not responding, still trying
530[ 363.327185] nfs: server 10.100.1.1 OK
531[ 363.380917] nfs: server 10.100.1.1 OK
532[ 363.415078] nfs: server 10.100.1.1 OK