Gitiles
Code Review Sign In
review.coreboot.org / board-status / 4d98b17119b70fd8b9497907dc542d4ff37ff041 / . / asrock / imb-a180 / 4.6-1184-g74e854c / 2017-08-24T10_37_14Z / kernel_log.txt
blob: 2c8a938a7cb06ac6143b5ce4783dad97368708ab [file] [log] [blame]
Kyösti Mälkkib1983e22017-08-24 14:03:27 +0300[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-1-grml-amd64 (team@grml.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-1+grml.1 (2014-11-05)
5[ 0.000000] Command line: initrd=/boot/grml64small/initrd.img boot=live live-media-path=/live/grml64-small/ bootid=grml64small201411 nomce console=ttyS0,115200n8 ssh=remote toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd45fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bfd46000-0x00000000dfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
14[ 0.000000] NX (Execute Disable) protection: active
15[ 0.000000] SMBIOS 2.7 present.
16[ 0.000000] DMI: ASROCK IMB-A180/IMB-A180, BIOS 4.6-1184-g74e854c 08/24/2017
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges enabled:
23[ 0.000000] 00000-9FFFF write-back
24[ 0.000000] A0000-BFFFF uncachable
25[ 0.000000] C0000-FFFFF write-back
26[ 0.000000] MTRR variable ranges enabled:
27[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
28[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
29[ 0.000000] 2 disabled
30[ 0.000000] 3 disabled
31[ 0.000000] 4 disabled
32[ 0.000000] 5 disabled
33[ 0.000000] 6 base 00FF800000 mask FFFF800000 write-protect
34[ 0.000000] 7 disabled
35[ 0.000000] TOM2: 0000000220000000 aka 8704M
36[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
37[ 0.000000] e820: last_pfn = 0xbfd46 max_arch_pfn = 0x400000000
38[ 0.000000] found SMP MP-table at [mem 0x000f0700-0x000f070f] mapped at [ffff8800000f0700]
39[ 0.000000] Scanning 1 areas for low memory corruption
40[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
41[ 0.000000] Using GB pages for direct mapping
42[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
43[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
44[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
45[ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
46[ 0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
48[ 0.000000] [mem 0x21fe00000-0x21fffffff] page 2M
49[ 0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
51[ 0.000000] [mem 0x21c000000-0x21fdfffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
53[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
54[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfd45fff]
55[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
56[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
57[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
58[ 0.000000] [mem 0x80000000-0xbfbfffff] page 2M
59[ 0.000000] [mem 0xbfc00000-0xbfd45fff] page 4k
60[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
61[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
62[ 0.000000] RAMDISK: [mem 0x7e84b000-0x7fffefff]
63[ 0.000000] ACPI: Early table checksum verification disabled
64[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
65[ 0.000000] ACPI: XSDT 0x00000000BFD5A0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: FACP 0x00000000BFD5B900 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: DSDT 0x00000000BFD5A280 001677 (v02 AMD COREBOOT 00010001 INTL 20161222)
68[ 0.000000] ACPI: FACS 0x00000000BFD5A240 000040
69[ 0.000000] ACPI: SSDT 0x00000000BFD5BA00 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A)
70[ 0.000000] ACPI: TCPA 0x00000000BFD5BA90 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: APIC 0x00000000BFD5BAD0 00006E (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: HEST 0x00000000BFD5BB40 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: SSDT 0x00000000BFD5BD10 0046D1 (v02 AMD AGESA 00000002 MSFT 04000000)
74[ 0.000000] ACPI: SSDT 0x00000000BFD603F0 00043C (v01 AMD AGESA 00000001 AMD 00000001)
75[ 0.000000] ACPI: VFCT 0x00000000BFD60830 00EA69 (v01 CORE COREBOOT 00000000 CORE 00000000)
76[ 0.000000] ACPI: HPET 0x00000000BFD6F2A0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
77[ 0.000000] ACPI: Local APIC address 0xfee00000
78[ 0.000000] No NUMA configuration found
79[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
80[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff]
81[ 0.000000] NODE_DATA [mem 0x21fff9000-0x21fffdfff]
82[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217e00000-ffff88021e7fffff] on node 0
83[ 0.000000] Zone ranges:
84[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
85[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
86[ 0.000000] Normal [mem 0x100000000-0x21fffffff]
87[ 0.000000] Movable zone start for each node
88[ 0.000000] Early memory node ranges
89[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
90[ 0.000000] node 0: [mem 0x00100000-0xbfd45fff]
91[ 0.000000] node 0: [mem 0x100000000-0x21fffffff]
92[ 0.000000] On node 0 totalpages: 1965284
93[ 0.000000] DMA zone: 56 pages used for memmap
94[ 0.000000] DMA zone: 21 pages reserved
95[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
96[ 0.000000] DMA32 zone: 10687 pages used for memmap
97[ 0.000000] DMA32 zone: 781638 pages, LIFO batch:31
98[ 0.000000] Normal zone: 16128 pages used for memmap
99[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
100[ 0.000000] ACPI: PM-Timer IO Port: 0x818
101[ 0.000000] ACPI: Local APIC address 0xfee00000
102[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
103[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
104[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
105[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
106[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
107[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
108[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
109[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
110[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
111[ 0.000000] ACPI: IRQ0 used by override.
112[ 0.000000] ACPI: IRQ2 used by override.
113[ 0.000000] ACPI: IRQ9 used by override.
114[ 0.000000] Using ACPI (MADT) for SMP configuration information
115[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
116[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
117[ 0.000000] nr_irqs_gsi: 72
118[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
119[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
120[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
121[ 0.000000] PM: Registered nosave memory: [mem 0xbfd46000-0xdfffffff]
122[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
125[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
126[ 0.000000] Booting paravirtualized kernel on bare hardware
127[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
128[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s85824 r8192 d20672 u1048576
129[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
130[ 0.000000] pcpu-alloc: [0] 0 1
131[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1938392
132[ 0.000000] Policy zone: Normal
133[ 0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img boot=live live-media-path=/live/grml64-small/ bootid=grml64small201411 nomce console=ttyS0,115200n8 ssh=remote toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz
134[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
135[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
136[ 0.000000] AGP: Checking aperture...
137[ 0.000000] AGP: No AGP bridge found
138[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
139[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
140[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
141[ 0.000000] AGP: This costs you 64MB of RAM
142[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
143[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
144[ 0.000000] Memory: 7584888K/7861136K available (5357K kernel code, 947K rwdata, 1928K rodata, 1220K init, 840K bss, 276248K reserved)
145[ 0.000000] Hierarchical RCU implementation.
146[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
147[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
148[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
149[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
150[ 0.000000] Console: colour dummy device 80x25
151[ 0.000000] console [ttyS0] enabled
152[ 0.000000] hpet clockevent registered
153[ 0.000000] tsc: Fast TSC calibration using PIT
154[ 0.000000] tsc: Detected 998.161 MHz processor
155[ 0.000077] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.32 BogoMIPS (lpj=3992644)
156[ 0.010724] pid_max: default: 32768 minimum: 301
157[ 0.015375] ACPI: Core revision 20140424
158[ 0.038308] ACPI: All ACPI Tables successfully acquired
159[ 0.043671] Security Framework initialized
160[ 0.047798] AppArmor: AppArmor disabled by boot time parameter
161[ 0.053639] Yama: disabled by default; enable with sysctl kernel.yama.*
162[ 0.061780] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
163[ 0.074934] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
164[ 0.084994] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
165[ 0.091914] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
166[ 0.099961] Initializing cgroup subsys memory
167[ 0.104346] Initializing cgroup subsys devices
168[ 0.108824] Initializing cgroup subsys freezer
169[ 0.113288] Initializing cgroup subsys net_cls
170[ 0.117761] Initializing cgroup subsys blkio
171[ 0.122055] Initializing cgroup subsys perf_event
172[ 0.126773] Initializing cgroup subsys net_prio
173[ 0.131383] tseg: 0000000000
174[ 0.131398] CPU: Physical Processor ID: 0
175[ 0.135420] CPU: Processor Core ID: 0
176[ 0.139101] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
177Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
178tlb_flushall_shift: 6
179[ 0.154543] Freeing SMP alternatives memory: 20K (ffffffff81a1f000 - ffffffff81a24000)
180[ 0.165195] ftrace: allocating 22111 entries in 87 pages
181[ 0.193280] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
182[ 0.238823] smpboot: CPU0: AMD E1-2100 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01)
183[ 0.352761] Performance Events: AMD PMU driver.
184[ 0.357325] ... version: 0
185[ 0.361340] ... bit width: 48
186[ 0.365440] ... generic registers: 4
187[ 0.369455] ... value mask: 0000ffffffffffff
188[ 0.374767] ... max period: 00007fffffffffff
189[ 0.380080] ... fixed-purpose events: 0
190[ 0.384095] ... event mask: 000000000000000f
191[ 0.393923] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
192[ 0.402276] x86: Booting SMP configuration:
193[ 0.406472] .... node #0, CPUs: #1
194[ 0.423382] x86: Booted up 1 node, 2 CPUs
195[ 0.427603] smpboot: Total of 2 processors activated (3992.64 BogoMIPS)
196[ 0.435094] devtmpfs: initialized
197[ 0.453801] pinctrl core: initialized pinctrl subsystem
198[ 0.459291] NET: Registered protocol family 16
199[ 0.464186] cpuidle: using governor ladder
200[ 0.468294] cpuidle: using governor menu
201[ 0.472406] ACPI: bus type PCI registered
202[ 0.476429] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
203[ 0.483125] PCI: Using configuration type 1 for base access
204[ 0.488701] PCI: Using configuration type 1 for extended access
205[ 0.510067] ACPI: Added _OSI(Module Device)
206[ 0.514267] ACPI: Added _OSI(Processor Device)
207[ 0.518718] ACPI: Added _OSI(3.0 _SCP Extensions)
208[ 0.523422] ACPI: Added _OSI(Processor Aggregator Device)
209[ 0.532268] ACPI: Executed 2 blocks of module-level executable AML code
210[ 0.548964] ACPI: Interpreter enabled
211[ 0.552650] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
212[ 0.561921] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
213[ 0.571209] ACPI: (supports S0 S1 S4 S5)
214[ 0.575137] ACPI: Using IOAPIC for interrupt routing
215[ 0.580149] HEST: Table parsing has been initialized.
216[ 0.585214] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
217[ 0.602504] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
218[ 0.608706] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
219[ 0.617142] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
220[ 0.625387] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored
221[ 0.635651] PCI host bridge to bus 0000:00
222[ 0.639761] pci_bus 0000:00: root bus resource [bus 00-ff]
223[ 0.645254] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
224[ 0.651441] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
225[ 0.657631] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
226[ 0.664513] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
227[ 0.671395] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
228[ 0.678292] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
229[ 0.678557] pci 0000:00:01.0: [1002:9834] type 00 class 0x030000
230[ 0.678586] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
231[ 0.678605] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
232[ 0.678619] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
233[ 0.678632] pci 0000:00:01.0: reg 0x24: [mem 0xf0b00000-0xf0b3ffff]
234[ 0.678646] pci 0000:00:01.0: reg 0x30: [mem 0xf0b40000-0xf0b5ffff pref]
235[ 0.678711] pci 0000:00:01.0: supports D1 D2
236[ 0.678717] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
237[ 0.678946] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
238[ 0.678972] pci 0000:00:01.1: reg 0x10: [mem 0xf0b60000-0xf0b63fff 64bit]
239[ 0.679066] pci 0000:00:01.1: supports D1 D2
240[ 0.679266] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
241[ 0.679509] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
242[ 0.679618] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
243[ 0.679733] pci 0000:00:02.3: System wakeup disabled by ACPI
244[ 0.685545] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
245[ 0.685653] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
246[ 0.685767] pci 0000:00:02.4: System wakeup disabled by ACPI
247[ 0.691593] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
248[ 0.691620] pci 0000:00:11.0: reg 0x10: [io 0x3410-0x3417]
249[ 0.691634] pci 0000:00:11.0: reg 0x14: [io 0x3420-0x3423]
250[ 0.691648] pci 0000:00:11.0: reg 0x18: [io 0x3418-0x341f]
251[ 0.691662] pci 0000:00:11.0: reg 0x1c: [io 0x3424-0x3427]
252[ 0.691676] pci 0000:00:11.0: reg 0x20: [io 0x3400-0x340f]
253[ 0.691691] pci 0000:00:11.0: reg 0x24: [mem 0xf0b6b000-0xf0b6b3ff]
254[ 0.691745] pci 0000:00:11.0: PME# supported from D3hot
255[ 0.691971] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
256[ 0.691997] pci 0000:00:12.0: reg 0x10: [mem 0xf0b68000-0xf0b68fff]
257[ 0.692190] pci 0000:00:12.0: System wakeup disabled by ACPI
258[ 0.697996] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
259[ 0.698025] pci 0000:00:12.2: reg 0x10: [mem 0xf0b6c000-0xf0b6c0ff]
260[ 0.698127] pci 0000:00:12.2: supports D1 D2
261[ 0.698133] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
262[ 0.698240] pci 0000:00:12.2: System wakeup disabled by ACPI
263[ 0.704050] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
264[ 0.704076] pci 0000:00:13.0: reg 0x10: [mem 0xf0b69000-0xf0b69fff]
265[ 0.704269] pci 0000:00:13.0: System wakeup disabled by ACPI
266[ 0.710071] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
267[ 0.710100] pci 0000:00:13.2: reg 0x10: [mem 0xf0b6d000-0xf0b6d0ff]
268[ 0.710202] pci 0000:00:13.2: supports D1 D2
269[ 0.710208] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
270[ 0.710315] pci 0000:00:13.2: System wakeup disabled by ACPI
271[ 0.716124] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
272[ 0.716396] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
273[ 0.716428] pci 0000:00:14.2: reg 0x10: [mem 0xf0b64000-0xf0b67fff 64bit]
274[ 0.716516] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
275[ 0.716734] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
276[ 0.717017] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
277[ 0.717043] pci 0000:00:14.7: reg 0x10: [mem 0xf0b6e000-0xf0b6e0ff 64bit]
278[ 0.717294] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
279[ 0.717321] pci 0000:00:16.0: reg 0x10: [mem 0xf0b6a000-0xf0b6afff]
280[ 0.717513] pci 0000:00:16.0: System wakeup disabled by ACPI
281[ 0.723317] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
282[ 0.723346] pci 0000:00:16.2: reg 0x10: [mem 0xf0b6f000-0xf0b6f0ff]
283[ 0.723448] pci 0000:00:16.2: supports D1 D2
284[ 0.723454] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot D3cold
285[ 0.723562] pci 0000:00:16.2: System wakeup disabled by ACPI
286[ 0.729365] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
287[ 0.729582] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
288[ 0.729793] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
289[ 0.730007] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
290[ 0.730229] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
291[ 0.730441] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
292[ 0.730812] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
293[ 0.730840] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
294[ 0.730876] pci 0000:01:00.0: reg 0x18: [mem 0xf090c000-0xf090cfff 64bit]
295[ 0.730901] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
296[ 0.731015] pci 0000:01:00.0: supports D1 D2
297[ 0.731021] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
298[ 0.731204] pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002
299[ 0.731232] pci 0000:01:00.1: reg 0x10: [io 0x1400-0x14ff]
300[ 0.731267] pci 0000:01:00.1: reg 0x18: [mem 0xf090d000-0xf090dfff 64bit]
301[ 0.731291] pci 0000:01:00.1: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit]
302[ 0.731389] pci 0000:01:00.1: supports D1 D2
303[ 0.731394] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
304[ 0.731564] pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002
305[ 0.731592] pci 0000:01:00.2: reg 0x10: [io 0x1800-0x18ff]
306[ 0.731627] pci 0000:01:00.2: reg 0x18: [mem 0xf090e000-0xf090efff 64bit]
307[ 0.731652] pci 0000:01:00.2: reg 0x20: [mem 0xf0904000-0xf0907fff 64bit]
308[ 0.731749] pci 0000:01:00.2: supports D1 D2
309[ 0.731754] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
310[ 0.731926] pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701
311[ 0.731954] pci 0000:01:00.3: reg 0x10: [io 0x1c00-0x1cff]
312[ 0.731989] pci 0000:01:00.3: reg 0x18: [mem 0xf090f000-0xf090f0ff 64bit]
313[ 0.732013] pci 0000:01:00.3: reg 0x20: [mem 0xf0908000-0xf090bfff 64bit]
314[ 0.732110] pci 0000:01:00.3: supports D1 D2
315[ 0.732116] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.736812] pci 0000:00:02.3: PCI bridge to [bus 01]
317[ 0.741797] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
318[ 0.741805] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
319[ 0.741817] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
320[ 0.741966] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
321[ 0.741994] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
322[ 0.742030] pci 0000:02:00.0: reg 0x18: [mem 0xf0a04000-0xf0a04fff 64bit pref]
323[ 0.742054] pci 0000:02:00.0: reg 0x20: [mem 0xf0a00000-0xf0a03fff 64bit pref]
324[ 0.742167] pci 0000:02:00.0: supports D1 D2
325[ 0.742173] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
326[ 0.748796] pci 0000:00:02.4: PCI bridge to [bus 02]
327[ 0.753774] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
328[ 0.753788] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
329[ 0.754351] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
330[ 0.761294] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
331[ 0.768226] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
332[ 0.775180] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
333[ 0.782119] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
334[ 0.789059] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
335[ 0.794582] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
336[ 0.801707] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
337[ 0.808988] ACPI: Enabled 5 GPEs in block 00 to 1F
338[ 0.814165] vgaarb: setting as boot device: PCI:0000:00:01.0
339[ 0.819826] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
340[ 0.827931] vgaarb: loaded
341[ 0.830649] vgaarb: bridge control possible 0000:00:01.0
342[ 0.836154] PCI: Using ACPI for IRQ routing
343[ 0.840352] PCI: pci_cache_line_size set to 64 bytes
344[ 0.840453] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
345[ 0.840459] e820: reserve RAM buffer [mem 0xbfd46000-0xbfffffff]
346[ 0.840936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
347[ 0.845891] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
348[ 0.853812] Switched to clocksource hpet
349[ 0.874684] pnp: PnP ACPI init
350[ 0.877795] ACPI: bus type PNP registered
351[ 0.882262] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
352[ 0.888892] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
353[ 0.889018] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
354[ 0.889401] pnp: PnP ACPI: found 2 devices
355[ 0.893514] ACPI: bus type PNP unregistered
356[ 0.909332] pci 0000:00:02.3: PCI bridge to [bus 01]
357[ 0.914312] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
358[ 0.920423] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
359[ 0.927216] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
360[ 0.934967] pci 0000:00:02.4: PCI bridge to [bus 02]
361[ 0.939939] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
362[ 0.946047] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
363[ 0.953805] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
364[ 0.953811] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
365[ 0.953817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
366[ 0.953833] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
367[ 0.953839] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
368[ 0.953846] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
369[ 0.953852] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
370[ 0.953858] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
371[ 0.953865] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
372[ 0.953871] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref]
373[ 0.953990] NET: Registered protocol family 2
374[ 0.959051] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
375[ 0.966812] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
376[ 0.973973] TCP: Hash tables configured (established 65536 bind 65536)
377[ 0.980609] TCP: reno registered
378[ 0.983891] UDP hash table entries: 4096 (order: 5, 131072 bytes)
379[ 0.990095] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
380[ 0.996894] NET: Registered protocol family 1
381[ 1.001314] pci 0000:00:01.0: Video device with shadowed ROM
382[ 1.003650] PCI: CLS 64 bytes, default 64
383[ 1.003800] Unpacking initramfs...
384[ 9.012753] Freeing initrd memory: 24272K (ffff88007e84b000 - ffff88007ffff000)
385[ 9.020115] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
386[ 9.026566] software IO TLB [mem 0xbbd46000-0xbfd46000] (64MB) mapped at [ffff8800bbd46000-ffff8800bfd45fff]
387[ 9.036765] perf: AMD NB counters detected
388[ 9.040886] perf: AMD L2I counters detected
389[ 9.045218] microcode: CPU0: patch_level=0x0700010b
390[ 9.050121] microcode: CPU1: patch_level=0x0700010b
391[ 9.055155] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
392[ 9.063961] LVT offset 0 assigned for vector 0x400
393[ 9.068776] perf: AMD IBS detected (0x000000ff)
394[ 9.073385] Scanning for low memory corruption every 60 seconds
395[ 9.080119] futex hash table entries: 512 (order: 3, 32768 bytes)
396[ 9.086303] audit: initializing netlink subsys (disabled)
397[ 9.091754] audit: type=2000 audit(1500947340.856:1): initialized
398[ 9.098899] HugeTLB registered 2 MB page size, pre-allocated 0 pages
399[ 9.105352] zbud: loaded
400[ 9.108358] VFS: Disk quotas dquot_6.5.2
401[ 9.112338] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
402[ 9.118878] squashfs: version 4.0 (2009/01/31) Phillip Lougher
403[ 9.124902] aufs 3.16-20140908
404[ 9.127985] msgmni has been set to 14861
405[ 9.132834] alg: No test for stdrng (krng)
406[ 9.137018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
407[ 9.144554] io scheduler noop registered
408[ 9.148494] io scheduler deadline registered
409[ 9.152883] io scheduler cfq registered (default)
410[ 9.157830] pcieport 0000:00:02.3: device [1022:1439] has invalid IRQ; check vendor BIOS
411[ 9.166172] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
412[ 9.166314] pcieport 0000:00:02.4: device [1022:1439] has invalid IRQ; check vendor BIOS
413[ 9.174578] pcieport 0000:00:02.4: irq 73 for MSI/MSI-X
414[ 9.174816] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
415[ 9.181789] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
416[ 9.188320] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
417[ 9.194857] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
418[ 9.201397] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
419[ 9.207937] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
420[ 9.207988] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
421[ 9.214972] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
422[ 9.221505] pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme loaded
423[ 9.221566] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
424[ 9.227203] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
425[ 9.234100] GHES: Failed to enable APEI firmware first mode.
426[ 9.240007] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
427[ 9.266751] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
428[ 9.294999] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
429[ 9.323231] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
430[ 9.351481] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
431[ 9.360120] Linux agpgart interface v0.103
432[ 9.364499] i8042: PNP: No PS/2 controller found. Probing ports directly.
433[ 9.377396] serio: i8042 KBD port at 0x60,0x64 irq 1
434[ 9.382388] serio: i8042 AUX port at 0x60,0x64 irq 12
435[ 9.387811] mousedev: PS/2 mouse device common for all mice
436[ 9.393535] rtc_cmos 00:01: RTC can wake from S4
437[ 9.398401] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
438[ 9.404540] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
439[ 9.411658] ledtrig-cpu: registered to indicate activity on CPUs
440[ 9.417905] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
441[ 9.424359] AMD IOMMUv2 functionality not available on this system
442[ 9.430829] TCP: cubic registered
443[ 9.434246] NET: Registered protocol family 10
444[ 9.439276] mip6: Mobile IPv6
445[ 9.442252] NET: Registered protocol family 17
446[ 9.446734] mpls_gso: MPLS GSO support
447[ 9.450499] mce: Unable to init device /dev/mcelog (rc: -5)
448[ 9.456583] registered taskstats version 1
449[ 9.485406] rtc_cmos 00:01: setting system clock to 2017-07-25 01:49:02 UTC (1500947342)
450[ 9.493654] PM: Hibernation image not present or could not be loaded.
451[ 9.509490] Freeing unused kernel memory: 1220K (ffffffff818ee000 - ffffffff81a1f000)
452[ 9.517346] Write protecting the kernel read-only data: 8192k
453[ 9.544535] Freeing unused kernel memory: 776K (ffff88000153e000 - ffff880001600000)
454[ 9.591019] Freeing unused kernel memory: 120K (ffff8800017e2000 - ffff880001800000)
455[ 9.637105] systemd-udevd[66]: starting version 215
456[ 9.638308] random: systemd-udevd urandom read with 4 bits of entropy available
457[ 9.674688] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
458[ 9.674704] ACPI: Power Button [PWRB]
459[ 9.674888] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
460[ 9.674899] ACPI: Power Button [PWRF]
461[ 9.683441] ACPI: bus type USB registered
462[ 9.683528] usbcore: registered new interface driver usbfs
463[ 9.683572] usbcore: registered new interface driver hub
464[ 9.685864] [drm] Initialized drm 1.1.0 20060810
465[ 9.688421] SCSI subsystem initialized
466[ 9.693178] usbcore: registered new device driver usb
467[ 9.695227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
468[ 9.696823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
469[ 9.699183] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
470[ 9.699532] r8169 0000:01:00.0: irq 74 for MSI/MSI-X
471[ 9.699987] r8169 0000:01:00.0 eth0: RTL8168dp/8111dp at 0xffffc90000002000, bc:5f:f4:bc:13:8f, XID 08b00000 IRQ 74
472[ 9.699996] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
473[ 9.700144] ehci-pci: EHCI PCI platform driver
474[ 9.700422] ehci-pci 0000:00:12.2: EHCI Host Controller
475[ 9.700444] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
476[ 9.700460] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
477[ 9.700479] ehci-pci 0000:00:12.2: debug port 1
478[ 9.700566] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0b6c000
479[ 9.711598] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
480[ 9.711780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
481[ 9.711788] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
482[ 9.711794] usb usb1: Product: EHCI Host Controller
483[ 9.711800] usb usb1: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
484[ 9.711805] usb usb1: SerialNumber: 0000:00:12.2
485[ 9.712227] hub 1-0:1.0: USB hub found
486[ 9.712255] hub 1-0:1.0: 4 ports detected
487[ 9.712314] sdhci: Secure Digital Host Controller Interface driver
488[ 9.712319] sdhci: Copyright(c) Pierre Ossman
489[ 9.712933] ehci-pci 0000:00:13.2: EHCI Host Controller
490[ 9.712954] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
491[ 9.712967] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
492[ 9.712985] ehci-pci 0000:00:13.2: debug port 1
493[ 9.713049] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0b6d000
494[ 9.714035] [drm] radeon kernel modesetting enabled.
495[ 9.714188] libata version 3.00 loaded.
496[ 9.723227] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
497[ 9.723405] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
498[ 9.723413] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
499[ 9.723419] usb usb2: Product: EHCI Host Controller
500[ 9.723425] usb usb2: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
501[ 9.723431] usb usb2: SerialNumber: 0000:00:13.2
502[ 9.723802] hub 2-0:1.0: USB hub found
503[ 9.723829] hub 2-0:1.0: 4 ports detected
504[ 9.724476] ehci-pci 0000:00:16.2: EHCI Host Controller
505[ 9.724494] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
506[ 9.724506] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
507[ 9.724526] ehci-pci 0000:00:16.2: debug port 1
508[ 9.724585] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0b6f000
509[ 9.735115] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
510[ 9.735284] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
511[ 9.735292] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
512[ 9.735298] usb usb3: Product: EHCI Host Controller
513[ 9.735304] usb usb3: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
514[ 9.735309] usb usb3: SerialNumber: 0000:00:16.2
515[ 9.735680] hub 3-0:1.0: USB hub found
516[ 9.735709] hub 3-0:1.0: 2 ports detected
517[ 9.736048] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
518[ 9.736344] mmc0: no vqmmc regulator found
519[ 9.736349] mmc0: no vmmc regulator found
520[ 9.736681] ohci-pci: OHCI PCI platform driver
521[ 9.737602] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
522[ 9.738541] [drm] initializing kernel modesetting (KABINI 0x1002:0x9834 0x1002:0x9834).
523[ 9.738573] [drm] register mmio base: 0xF0B00000
524[ 9.738576] [drm] register mmio size: 262144
525[ 9.738588] [drm] doorbell mmio base: 0xF0000000
526[ 9.738591] [drm] doorbell mmio size: 8388608
527[ 9.738602] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9834, size 59904
528[ 9.738654] ATOM BIOS: AMD
529[ 9.738723] [drm] Changing default dispclk from 300Mhz to 600Mhz
530[ 9.738755] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
531[ 9.738763] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
532[ 9.738768] [drm] Detected VRAM RAM=512M, BAR=256M
533[ 9.738771] [drm] RAM width 128bits DDR
534[ 9.739616] [TTM] Zone kernel: Available graphics memory: 3805648 kiB
535[ 9.739622] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
536[ 9.739626] [TTM] Initializing pool allocator
537[ 9.739641] [TTM] Initializing DMA pool allocator
538[ 9.739702] [drm] radeon: 512M of VRAM memory ready
539[ 9.739707] [drm] radeon: 1024M of GTT memory ready.
540[ 9.739749] [drm] Loading KABINI Microcode
541[ 9.740030] [drm] Internal thermal controller without fan control
542[ 9.741159] [drm] radeon: dpm initialized
543[ 9.745392] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
544[ 9.746034] [drm] GART: num cpu pages 262144, num gpu pages 262144
545[ 9.756788] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
546[ 9.757045] radeon 0000:00:01.0: WB enabled
547[ 9.757090] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800bb22cc00
548[ 9.757099] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8800bb22cc04
549[ 9.757106] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8800bb22cc08
550[ 9.757113] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800bb22cc0c
551[ 9.757119] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8800bb22cc10
552[ 9.758055] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900011b6c98
553[ 9.758176] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff8800bb22cc18
554[ 9.758184] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff8800bb22cc1c
555[ 9.758190] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
556[ 9.758193] [drm] Driver supports precise vblank timestamp query.
557[ 9.758239] radeon 0000:00:01.0: irq 75 for MSI/MSI-X
558[ 9.758270] radeon 0000:00:01.0: radeon: using MSI.
559[ 9.758328] [drm] radeon: irq initialized.
560[ 9.766172] [drm] ring test on 0 succeeded in 2 usecs
561[ 9.766296] [drm] ring test on 1 succeeded in 3 usecs
562[ 9.766331] [drm] ring test on 2 succeeded in 3 usecs
563[ 9.766581] [drm] ring test on 3 succeeded in 2 usecs
564[ 9.766595] [drm] ring test on 4 succeeded in 2 usecs
565[ 9.823201] [drm] ring test on 5 succeeded in 2 usecs
566[ 9.843141] [drm] UVD initialized successfully.
567[ 9.899218] r8169 0000:01:00.0 eth0: rtl_ocp_read_cond == 0 (loop: 10, delay: 10).
568[ 9.899276] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
569[ 9.899639] r8169 0000:02:00.0: irq 76 for MSI/MSI-X
570[ 9.900137] r8169 0000:02:00.0 eth1: RTL8168evl/8111evl at 0xffffc90001148000, bc:5f:f4:bc:13:98, XID 0c900800 IRQ 76
571[ 9.900146] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
572[ 9.952515] [drm] ring test on 6 succeeded in 17 usecs
573[ 9.952535] [drm] ring test on 7 succeeded in 3 usecs
574[ 9.952539] [drm] VCE initialized successfully.
575[ 9.953491] [drm] ib test on ring 0 succeeded in 0 usecs
576[ 9.953718] [drm] ib test on ring 1 succeeded in 0 usecs
577[ 9.953937] [drm] ib test on ring 2 succeeded in 0 usecs
578[ 9.954166] [drm] ib test on ring 3 succeeded in 0 usecs
579[ 9.954394] [drm] ib test on ring 4 succeeded in 0 usecs
580[ 9.978113] [drm] ib test on ring 5 succeeded
581[ 10.000854] [drm] ib test on ring 6 succeeded
582[ 10.003301] [drm] ib test on ring 7 succeeded
583[ 10.004437] [drm] Radeon Display Connectors
584[ 10.004443] [drm] Connector 0:
585[ 10.004447] [drm] HDMI-A-1
586[ 10.004450] [drm] HPD1
587[ 10.004456] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
588[ 10.004459] [drm] Encoders:
589[ 10.004462] [drm] DFP1: INTERNAL_UNIPHY
590[ 10.004466] [drm] Connector 1:
591[ 10.004469] [drm] HDMI-A-2
592[ 10.004472] [drm] HPD2
593[ 10.004476] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
594[ 10.004479] [drm] Encoders:
595[ 10.004482] [drm] DFP2: INTERNAL_UNIPHY
596[ 10.004485] [drm] Connector 2:
597[ 10.004488] [drm] VGA-1
598[ 10.004492] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
599[ 10.004495] [drm] Encoders:
600[ 10.004498] [drm] CRT1: INTERNAL_KLDSCP_DAC1
601[ 10.023462] radeon 0000:00:01.0: No connectors reported connected with modes
602[ 10.023471] [drm] Cannot find any crtc or sizes - going 1024x768
603[ 10.024762] [drm] fb mappable at 0xE098F000
604[ 10.024766] [drm] vram apper at 0xE0000000
605[ 10.024770] [drm] size 3145728
606[ 10.024773] [drm] fb depth is 24
607[ 10.024776] [drm] pitch is 4096
608[ 10.024945] fbcon: radeondrmfb (fb0) is primary device
609[ 10.025142] Console: switching to colour frame buffer device 128x48
610[ 10.032826] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
611[ 10.032831] radeon 0000:00:01.0: registered panic notifier
612[ 10.035156] tsc: Refined TSC clocksource calibration: 998.191 MHz
613[ 10.055171] usb 2-1: new high-speed USB device number 2 using ehci-pci
614[ 10.059135] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
615[ 10.059199] ahci 0000:00:11.0: version 3.0
616[ 10.059530] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
617[ 10.059541] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
618[ 10.062951] scsi0 : ahci
619[ 10.063669] scsi1 : ahci
620[ 10.063841] ata1: SATA max UDMA/133 abar m1024@0xf0b6b000 port 0xf0b6b100 irq 19
621[ 10.063850] ata2: SATA max UDMA/133 abar m1024@0xf0b6b000 port 0xf0b6b180 irq 19
622[ 10.064223] ohci-pci 0000:00:12.0: OHCI PCI host controller
623[ 10.064244] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
624[ 10.064332] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0b68000
625[ 10.123249] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
626[ 10.123259] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
627[ 10.123265] usb usb4: Product: OHCI PCI host controller
628[ 10.123271] usb usb4: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
629[ 10.123276] usb usb4: SerialNumber: 0000:00:12.0
630[ 10.123673] hub 4-0:1.0: USB hub found
631[ 10.123702] hub 4-0:1.0: 4 ports detected
632[ 10.124308] ohci-pci 0000:00:13.0: OHCI PCI host controller
633[ 10.124327] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
634[ 10.124380] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0b69000
635[ 10.183237] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
636[ 10.183244] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
637[ 10.183250] usb usb5: Product: OHCI PCI host controller
638[ 10.183255] usb usb5: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
639[ 10.183260] usb usb5: SerialNumber: 0000:00:13.0
640[ 10.183615] hub 5-0:1.0: USB hub found
641[ 10.183643] hub 5-0:1.0: 4 ports detected
642[ 10.184185] ohci-pci 0000:00:16.0: OHCI PCI host controller
643[ 10.184202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
644[ 10.184245] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0b6a000
645[ 10.187973] usb 2-1: New USB device found, idVendor=0457, idProduct=0151
646[ 10.187981] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
647[ 10.187988] usb 2-1: Product: USB Mass Storage Device
648[ 10.187994] usb 2-1: SerialNumber: 9875c6f37f77ae
649[ 10.192247] usb-storage 2-1:1.0: USB Mass Storage device detected
650[ 10.192658] usb-storage 2-1:1.0: Quirks match for vid 0457 pid 0151: 80
651[ 10.192729] scsi2 : usb-storage 2-1:1.0
652[ 10.192964] usbcore: registered new interface driver usb-storage
653[ 10.243263] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
654[ 10.243271] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
655[ 10.243277] usb usb6: Product: OHCI PCI host controller
656[ 10.243282] usb usb6: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
657[ 10.243288] usb usb6: SerialNumber: 0000:00:16.0
658[ 10.243667] hub 6-0:1.0: USB hub found
659[ 10.243696] hub 6-0:1.0: 2 ports detected
660[ 10.299226] usb 2-4: new high-speed USB device number 3 using ehci-pci
661[ 10.383199] ata1: SATA link down (SStatus 0 SControl 300)
662[ 10.383240] ata2: SATA link down (SStatus 0 SControl 300)
663[ 10.406284] device-mapper: uevent: version 1.0.3
664[ 10.406717] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
665[ 11.035406] Switched to clocksource tsc
666[ 11.192777] scsi 2:0:0:0: Direct-Access JetFlash TS4GJF2A/120 0.00 PQ: 0 ANSI: 2
667[ 11.197877] sd 2:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
668[ 11.198616] sd 2:0:0:0: [sda] Write Protect is off
669[ 11.198624] sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
670[ 11.199384] sd 2:0:0:0: [sda] Asking for cache data failed
671[ 11.199392] sd 2:0:0:0: [sda] Assuming drive cache: write through
672[ 11.203397] sda: sda1
673[ 11.206244] sd 2:0:0:0: [sda] Attached SCSI removable disk
674[ 11.208083] sd 2:0:0:0: Attached scsi generic sg0 type 0
675[ 11.684424] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
676[ 12.798429] random: nonblocking pool is initialized
677[ 25.413359] usb 2-4: device descriptor read/64, error -110
678[ 27.487640] loop: module loaded
679[ 27.524362] loop0: unknown partition table
680[ 40.631472] usb 2-4: device descriptor read/64, error -110
681[ 40.847496] usb 2-4: new high-speed USB device number 4 using ehci-pci
682[ 55.961621] usb 2-4: device descriptor read/64, error -110
683[ 71.179766] usb 2-4: device descriptor read/64, error -110
684[ 71.395793] usb 2-4: new high-speed USB device number 5 using ehci-pci
685[ 81.805228] usb 2-4: device not accepting address 5, error -110
686[ 81.917273] usb 2-4: new high-speed USB device number 6 using ehci-pci
687[ 92.326714] usb 2-4: device not accepting address 6, error -110
688[ 92.326768] usb usb2-port4: unable to enumerate USB device
689[ 92.602780] usb 5-4: new full-speed USB device number 2 using ohci-pci
690[ 94.224295] FS-Cache: Loaded
691[ 94.242662] 9pnet: Installing 9P2000 support
692[ 94.256090] 9p: Installing v9fs 9p2000 file system support
693[ 94.256126] FS-Cache: Netfs '9p' registered for caching
694[ 99.036054] systemd-udevd[599]: starting version 215
695[ 99.486011] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
696[ 99.498720] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
697[ 99.498837] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
698[ 99.655792] ACPI: acpi_idle registered with cpuidle
699[ 99.685978] acpi-cpufreq: overriding BIOS provided _PSD data
700[ 99.768061] ipmi message handler version 39.2
701[ 99.769344] IPMI System Interface driver.
702[ 99.769406] ipmi_si 0000:01:00.3: probing via PCI
703[ 99.769566] ipmi_si 0000:01:00.3: [io 0x1c00-0x1cff] regsize 1 spacing 1 irq 35
704[ 99.769571] ipmi_si: Adding PCI-specified kcs state machine
705[ 99.769661] ipmi_si: Trying PCI-specified kcs state machine at i/o address 0x1c00, slave address 0x0, irq 35
706[ 99.897492] snd_hda_intel 0000:00:01.1: irq 77 for MSI/MSI-X
707[ 99.897645] snd_hda_intel 0000:00:14.2: irq 78 for MSI/MSI-X
708[ 100.025773] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
709[ 100.025998] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
710[ 100.057982] EDAC MC: Ver: 3.0.0
711[ 100.164939] MCE: In-kernel MCE decoding enabled.
712[ 100.209351] input: PC Speaker as /devices/platform/pcspkr/input/input7
713[ 100.238096] sound hdaudioC1D0: ALC662 rev1: SKU not ready 0x411111f0
714[ 100.238258] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
715[ 100.238267] sound hdaudioC1D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
716[ 100.238274] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
717[ 100.238279] sound hdaudioC1D0: mono: mono_out=0x0
718[ 100.238284] sound hdaudioC1D0: inputs:
719[ 100.238291] sound hdaudioC1D0: Mic=0x18
720[ 100.303544] AMD64 EDAC driver v3.4.0
721[ 100.303622] EDAC amd64: DRAM ECC disabled.
722[ 100.303635] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable.
723[ 100.303641] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
724 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
725 (Note that use of the override may cause unknown side effects.)
726[ 100.306763] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input9
727[ 100.307366] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
728[ 100.307706] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
729[ 100.456456] AVX version of gcm_enc/dec engaged.
730[ 100.558066] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
731[ 100.698132] alg: No test for crc32 (crc32-pclmul)
732[ 100.877173] kvm: Nested Virtualization enabled
733[ 100.877185] kvm: Nested Paging enabled
734[ 107.740909] usb 5-4: device descriptor read/64, error -110
735[ 122.983056] usb 5-4: device descriptor read/64, error -110
736[ 123.223089] usb 5-4: new full-speed USB device number 3 using ohci-pci
737[ 138.361240] usb 5-4: device descriptor read/64, error -110
738[ 150.386880] ipmi_si: There appears to be no BMC at this location
739[ 153.603383] usb 5-4: device descriptor read/64, error -110
740[ 153.843397] usb 5-4: new full-speed USB device number 4 using ohci-pci
741[ 164.252848] usb 5-4: device not accepting address 4, error -110
742[ 164.388880] usb 5-4: new full-speed USB device number 5 using ohci-pci
743[ 174.798331] usb 5-4: device not accepting address 5, error -110
744[ 174.798415] usb usb5-port4: unable to enumerate USB device
745[ 176.784690] r8169 0000:02:00.0 eth1: link down
746[ 176.784771] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
747[ 176.792019] r8169 0000:01:00.0 eth0: link down
748[ 176.792092] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
749[ 176.792947] r8169 0000:01:00.0 eth0: link down
750[ 177.171134] RPC: Registered named UNIX socket transport module.
751[ 177.171143] RPC: Registered udp transport module.
752[ 177.171148] RPC: Registered tcp transport module.
753[ 177.171152] RPC: Registered tcp NFSv4.1 backchannel transport module.
754[ 177.237686] FS-Cache: Netfs 'nfs' registered for caching
755[ 177.342111] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
756[ 179.716350] r8169 0000:01:00.0 eth0: link up
757[ 179.716372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
758[ 183.712646] fuse init (API version 7.23)