Paul Menzel | 2628571 | 2017-04-17 10:57:51 +0200 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Linux version 3.2.0-61-generic (root@devel.trisquel.info) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1trisquel1 SMP Mon May 12 07:09:15 UTC 2014 (Ubuntu 3.2.0-61.93+6.0.1trisquel1-generic 3.2.55-gnu) |
| 4 | [ 0.000000] KERNEL supported cpus: |
| 5 | [ 0.000000] Intel GenuineIntel |
| 6 | [ 0.000000] AMD AuthenticAMD |
| 7 | [ 0.000000] NSC Geode by NSC |
| 8 | [ 0.000000] Cyrix CyrixInstead |
| 9 | [ 0.000000] Centaur CentaurHauls |
| 10 | [ 0.000000] Transmeta GenuineTMx86 |
| 11 | [ 0.000000] Transmeta TransmetaCPU |
| 12 | [ 0.000000] UMC UMC UMC UMC |
| 13 | [ 0.000000] BIOS-provided physical RAM map: |
| 14 | [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) |
| 15 | [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) |
| 16 | [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| 17 | [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7b0000 (usable) |
| 18 | [ 0.000000] BIOS-e820: 000000000f7b0000 - 000000000f7e0000 (reserved) |
| 19 | [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! |
| 20 | [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits |
| 21 | [ 0.000000] SMBIOS 2.7 present. |
| 22 | [ 0.000000] DMI: PC Engines ALIX.1C/ALIX.1C, BIOS GNUtoo@no-log.org 08/13/2014 |
| 23 | [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) |
| 24 | [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) |
| 25 | [ 0.000000] last_pfn = 0xf7b0 max_arch_pfn = 0x100000 |
| 26 | [ 0.000000] initial memory mapped : 0 - 01c00000 |
| 27 | [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 |
| 28 | [ 0.000000] init_memory_mapping: 0000000000000000-000000000f7b0000 |
| 29 | [ 0.000000] 0000000000 - 0000400000 page 4k |
| 30 | [ 0.000000] 0000400000 - 000f400000 page 2M |
| 31 | [ 0.000000] 000f400000 - 000f7b0000 page 4k |
| 32 | [ 0.000000] kernel direct mapping tables up to f7b0000 @ 1bf8000-1c00000 |
| 33 | [ 0.000000] RAMDISK: 0e2e6000 - 0f05f000 |
| 34 | [ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219) |
| 35 | [ 0.000000] 0MB HIGHMEM available. |
| 36 | [ 0.000000] 247MB LOWMEM available. |
| 37 | [ 0.000000] mapped low ram: 0 - 0f7b0000 |
| 38 | [ 0.000000] low ram: 0 - 0f7b0000 |
| 39 | [ 0.000000] Zone PFN ranges: |
| 40 | [ 0.000000] DMA 0x00000010 -> 0x00001000 |
| 41 | [ 0.000000] Normal 0x00001000 -> 0x0000f7b0 |
| 42 | [ 0.000000] HighMem empty |
| 43 | [ 0.000000] Movable zone start PFN for each node |
| 44 | [ 0.000000] early_node_map[2] active PFN ranges |
| 45 | [ 0.000000] 0: 0x00000010 -> 0x0000009f |
| 46 | [ 0.000000] 0: 0x00000100 -> 0x0000f7b0 |
| 47 | [ 0.000000] On node 0 totalpages: 63295 |
| 48 | [ 0.000000] free_area_init_node: node 0, pgdat c1817d80, node_mem_map cf5bf200 |
| 49 | [ 0.000000] DMA zone: 32 pages used for memmap |
| 50 | [ 0.000000] DMA zone: 0 pages reserved |
| 51 | [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 |
| 52 | [ 0.000000] Normal zone: 464 pages used for memmap |
| 53 | [ 0.000000] Normal zone: 58848 pages, LIFO batch:15 |
| 54 | [ 0.000000] Using APIC driver default |
| 55 | [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org |
| 56 | [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs |
| 57 | [ 0.000000] No local APIC present or hardware disabled |
| 58 | [ 0.000000] APIC: disable apic facility |
| 59 | [ 0.000000] APIC: switched to apic NOOP |
| 60 | [ 0.000000] nr_irqs_gsi: 16 |
| 61 | [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
| 62 | [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
| 63 | [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
| 64 | [ 0.000000] Allocating PCI resources starting at f7e0000 (gap: f7e0000:f0820000) |
| 65 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 66 | [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 |
| 67 | [ 0.000000] PERCPU: Embedded 13 pages/cpu @cf5ae000 s31616 r0 d21632 u53248 |
| 68 | [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096 |
| 69 | [ 0.000000] pcpu-alloc: [0] 0 |
| 70 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62799 |
| 71 | [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-61-generic root=/dev/mapper/alix--vg-root ro console=ttyS0,115200 quiet splash vt.handoff=7 |
| 72 | [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) |
| 73 | [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) |
| 74 | [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) |
| 75 | [ 0.000000] Initializing CPU#0 |
| 76 | [ 0.000000] allocated 1014272 bytes of page_cgroup |
| 77 | [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| 78 | [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) |
| 79 | [ 0.000000] Memory: 226152k/253632k available (5641k kernel code, 27028k reserved, 2695k data, 716k init, 0k highmem) |
| 80 | [ 0.000000] virtual kernel memory layout: |
| 81 | [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) |
| 82 | [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) |
| 83 | [ 0.000000] vmalloc : 0xcffb0000 - 0xff7fe000 ( 760 MB) |
| 84 | [ 0.000000] lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB) |
| 85 | [ 0.000000] .init : 0xc1825000 - 0xc18d8000 ( 716 kB) |
| 86 | [ 0.000000] .data : 0xc15826c4 - 0xc18244c0 (2695 kB) |
| 87 | [ 0.000000] .text : 0xc1000000 - 0xc15826c4 (5641 kB) |
| 88 | [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| 89 | [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 |
| 90 | [ 0.000000] Hierarchical RCU implementation. |
| 91 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 92 | [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 |
| 93 | [ 0.000000] CPU 0 irqstacks, hard=cdc08000 soft=cdc0a000 |
| 94 | [ 0.000000] WARNING: Persistent clock returned invalid value! |
| 95 | [ 0.000000] Check your CMOS/BIOS settings. |
| 96 | [ 0.000000] vt handoff: transparent VT on vt#7 |
| 97 | [ 0.000000] Console: colour dummy device 80x25 |
| 98 | [ 0.000000] console [ttyS0] enabled |
| 99 | [ 0.000000] Fast TSC calibration using PIT |
| 100 | [ 0.000000] Detected 498.039 MHz processor. |
| 101 | [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.07 BogoMIPS (lpj=1992156) |
| 102 | [ 0.004046] pid_max: default: 32768 minimum: 301 |
| 103 | [ 0.004219] Security Framework initialized |
| 104 | [ 0.004344] AppArmor: AppArmor initialized |
| 105 | [ 0.004360] Yama: becoming mindful. |
| 106 | [ 0.004746] Mount-cache hash table entries: 512 |
| 107 | [ 0.008218] Initializing cgroup subsys cpuacct |
| 108 | [ 0.008269] Initializing cgroup subsys memory |
| 109 | [ 0.008319] Initializing cgroup subsys devices |
| 110 | [ 0.008338] Initializing cgroup subsys freezer |
| 111 | [ 0.008356] Initializing cgroup subsys blkio |
| 112 | [ 0.008394] Initializing cgroup subsys perf_event |
| 113 | [ 0.008635] SMP alternatives: switching to UP code |
| 114 | [ 0.034692] Freeing SMP alternatives: 24k freed |
| 115 | [ 0.034745] ftrace: allocating 25525 entries in 50 pages |
| 116 | [ 0.040217] weird, boot CPU (#0) not listed by the BIOS. |
| 117 | [ 0.040235] SMP motherboard not detected. |
| 118 | [ 0.040249] Local APIC not detected. Using dummy APIC emulation. |
| 119 | [ 0.040265] SMP disabled |
| 120 | [ 0.040278] Performance Events: no PMU driver, software events only. |
| 121 | [ 0.040936] NMI watchdog disabled (cpu0): hardware events not enabled |
| 122 | [ 0.041028] Brought up 1 CPUs |
| 123 | [ 0.041046] Total of 1 processors activated (996.07 BogoMIPS). |
| 124 | [ 0.044913] devtmpfs: initialized |
| 125 | [ 0.045694] EVM: security.selinux |
| 126 | [ 0.045708] EVM: security.SMACK64 |
| 127 | [ 0.045722] EVM: security.capability |
| 128 | [ 0.056281] print_constraints: dummy: |
| 129 | [ 0.056388] RTC time: 20:05:50, date: 12/01/99 |
| 130 | [ 0.056639] NET: Registered protocol family 16 |
| 131 | [ 0.057511] EISA bus registered |
| 132 | [ 0.059309] PCI: PCI BIOS revision 2.10 entry at 0xfd4b7, last bus=0 |
| 133 | [ 0.059328] PCI: Using configuration type 1 for base access |
| 134 | [ 0.069498] bio: create slab <bio-0> at 0 |
| 135 | [ 0.070054] ACPI: Interpreter disabled. |
| 136 | [ 0.070494] vgaarb: loaded |
| 137 | [ 0.071418] i2c-core: driver [aat2870] using legacy suspend method |
| 138 | [ 0.071436] i2c-core: driver [aat2870] using legacy resume method |
| 139 | [ 0.071993] SCSI subsystem initialized |
| 140 | [ 0.072288] libata version 3.00 loaded. |
| 141 | [ 0.072636] usbcore: registered new interface driver usbfs |
| 142 | [ 0.072729] usbcore: registered new interface driver hub |
| 143 | [ 0.072897] usbcore: registered new device driver usb |
| 144 | [ 0.073528] PCI: Probing PCI hardware |
| 145 | [ 0.073545] PCI: Probing PCI hardware (bus 00) |
| 146 | [ 0.073903] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600 |
| 147 | [ 0.074048] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f] |
| 148 | [ 0.074893] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300 |
| 149 | [ 0.075171] pci 0000:00:01.1: reg 10: [mem 0xfd000000-0xfdffffff] |
| 150 | [ 0.075372] pci 0000:00:01.1: reg 14: [mem 0xfe010000-0xfe013fff] |
| 151 | [ 0.075571] pci 0000:00:01.1: reg 18: [mem 0xfe014000-0xfe017fff] |
| 152 | [ 0.075771] pci 0000:00:01.1: reg 1c: [mem 0xfe018000-0xfe01bfff] |
| 153 | [ 0.075971] pci 0000:00:01.1: reg 20: [mem 0xfe01c000-0xfe01ffff] |
| 154 | [ 0.076683] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010 |
| 155 | [ 0.076928] pci 0000:00:01.2: reg 10: [mem 0xfe020000-0xfe023fff] |
| 156 | [ 0.078193] pci 0000:00:0c.0: [1814:0201] type 0 class 0x000280 |
| 157 | [ 0.078238] pci 0000:00:0c.0: reg 10: [mem 0xfe024000-0xfe025fff] |
| 158 | [ 0.078395] pci 0000:00:0d.0: [1106:3053] type 0 class 0x000200 |
| 159 | [ 0.078440] pci 0000:00:0d.0: reg 10: [io 0x1000-0x10ff] |
| 160 | [ 0.078474] pci 0000:00:0d.0: reg 14: [mem 0xfe02b000-0xfe02b0ff] |
| 161 | [ 0.078586] pci 0000:00:0d.0: supports D1 D2 |
| 162 | [ 0.078606] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 163 | [ 0.078632] pci 0000:00:0d.0: PME# disabled |
| 164 | [ 0.078687] pci 0000:00:0e.0: [168c:001a] type 0 class 0x000200 |
| 165 | [ 0.078732] pci 0000:00:0e.0: reg 10: [mem 0xfe000000-0xfe00ffff] |
| 166 | [ 0.078977] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601 |
| 167 | [ 0.079292] pci 0000:00:0f.0: reg 10: [io 0x1cb0-0x1cb7] |
| 168 | [ 0.079559] pci 0000:00:0f.0: reg 14: [io 0x1400-0x14ff] |
| 169 | [ 0.079826] pci 0000:00:0f.0: reg 18: [io 0x1c00-0x1c3f] |
| 170 | [ 0.080126] pci 0000:00:0f.0: reg 1c: [io 0x1c80-0x1c9f] |
| 171 | [ 0.080399] pci 0000:00:0f.0: reg 20: [io 0x1800-0x187f] |
| 172 | [ 0.080684] pci 0000:00:0f.0: reg 24: [io 0x1c40-0x1c7f] |
| 173 | [ 0.081284] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101 |
| 174 | [ 0.082196] pci 0000:00:0f.2: reg 20: [io 0x1ca0-0x1caf] |
| 175 | [ 0.082854] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401 |
| 176 | [ 0.083115] pci 0000:00:0f.3: reg 10: [io 0x1880-0x18ff] |
| 177 | [ 0.084484] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03 |
| 178 | [ 0.084834] pci 0000:00:0f.4: reg 10: [mem 0xfe028000-0xfe028fff] |
| 179 | [ 0.086351] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold |
| 180 | [ 0.086421] pci 0000:00:0f.4: PME# disabled |
| 181 | [ 0.086697] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03 |
| 182 | [ 0.087039] pci 0000:00:0f.5: reg 10: [mem 0xfe029000-0xfe029fff] |
| 183 | [ 0.088549] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold |
| 184 | [ 0.088618] pci 0000:00:0f.5: PME# disabled |
| 185 | [ 0.089185] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=mem,locks=none |
| 186 | [ 0.092121] PCI: pci_cache_line_size set to 32 bytes |
| 187 | [ 0.092624] reserve RAM buffer: 000000000009fc00 - 000000000009ffff |
| 188 | [ 0.092646] reserve RAM buffer: 000000000f7b0000 - 000000000fffffff |
| 189 | [ 0.093365] NetLabel: Initializing |
| 190 | [ 0.093380] NetLabel: domain hash size = 128 |
| 191 | [ 0.093394] NetLabel: protocols = UNLABELED CIPSOv4 |
| 192 | [ 0.093465] NetLabel: unlabeled traffic allowed by default |
| 193 | [ 0.093887] Switching to clocksource pit |
| 194 | [ 0.146600] AppArmor: AppArmor Filesystem Enabled |
| 195 | [ 0.146706] pnp: PnP ACPI: disabled |
| 196 | [ 0.146724] PnPBIOS: Scanning system for PnP BIOS support... |
| 197 | [ 0.146896] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6f70 |
| 198 | [ 0.146923] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd40c, dseg 0xf0000 |
| 199 | [ 0.148441] PnPBIOS: dev_node_info: function not supported on this system |
| 200 | [ 0.148458] PnPBIOS: Unable to get node info. Aborting. |
| 201 | [ 0.162873] PCI: max bus depth: 0 pci_try_num: 1 |
| 202 | [ 0.162929] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] |
| 203 | [ 0.162953] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] |
| 204 | [ 0.163229] NET: Registered protocol family 2 |
| 205 | [ 0.163643] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) |
| 206 | [ 0.165083] TCP established hash table entries: 8192 (order: 4, 65536 bytes) |
| 207 | [ 0.165299] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| 208 | [ 0.165502] TCP: Hash tables configured (established 8192 bind 8192) |
| 209 | [ 0.165521] TCP reno registered |
| 210 | [ 0.165541] UDP hash table entries: 128 (order: 0, 4096 bytes) |
| 211 | [ 0.165584] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) |
| 212 | [ 0.166005] NET: Registered protocol family 1 |
| 213 | [ 0.166203] pci 0000:00:01.1: Boot video device |
| 214 | [ 0.166863] PCI: CLS 64 bytes, default 32 |
| 215 | [ 0.167315] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 216 | [ 0.183883] Trying to unpack rootfs image as initramfs... |
| 217 | [ 0.207963] audit: initializing netlink socket (disabled) |
| 218 | [ 0.208018] type=2000 audit(0.204:1): initialized |
| 219 | [ 0.575460] HugeTLB registered 4 MB page size, pre-allocated 0 pages |
| 220 | [ 0.610627] VFS: Disk quotas dquot_6.5.2 |
| 221 | [ 0.611144] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| 222 | [ 0.622019] fuse init (API version 7.17) |
| 223 | [ 0.622849] msgmni has been set to 441 |
| 224 | [ 0.640299] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) |
| 225 | [ 0.640531] io scheduler noop registered |
| 226 | [ 0.640548] io scheduler deadline registered |
| 227 | [ 0.640600] io scheduler cfq registered (default) |
| 228 | [ 0.641463] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 229 | [ 0.641633] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 230 | [ 0.642890] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled |
| 231 | [ 0.647712] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 232 | [ 0.647860] isapnp: Scanning for PnP cards... |
| 233 | [ 0.654286] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
| 234 | [ 0.719891] Linux agpgart interface v0.103 |
| 235 | [ 0.787730] brd: module loaded |
| 236 | [ 0.802070] loop: module loaded |
| 237 | [ 0.806817] Fixed MDIO Bus: probed |
| 238 | [ 0.807012] tun: Universal TUN/TAP device driver, 1.6 |
| 239 | [ 0.807029] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| 240 | [ 0.807341] PPP generic driver version 2.4.2 |
| 241 | [ 0.811104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 242 | [ 0.811407] ehci_hcd 0000:00:0f.5: setting latency timer to 64 |
| 243 | [ 0.811451] ehci_hcd 0000:00:0f.5: EHCI Host Controller |
| 244 | [ 0.811746] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1 |
| 245 | [ 0.835299] ehci_hcd 0000:00:0f.5: cache line size of 64 is not supported |
| 246 | [ 0.835360] ehci_hcd 0000:00:0f.5: irq 9, io mem 0xfe029000 |
| 247 | [ 0.887065] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00 |
| 248 | [ 0.968776] hub 1-0:1.0: USB hub found |
| 249 | [ 0.968812] hub 1-0:1.0: 4 ports detected |
| 250 | [ 0.969278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 251 | [ 0.969569] ohci_hcd 0000:00:0f.4: setting latency timer to 64 |
| 252 | [ 0.969613] ohci_hcd 0000:00:0f.4: OHCI Host Controller |
| 253 | [ 0.969942] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2 |
| 254 | [ 0.970019] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xfe028000 |
| 255 | [ 1.093111] hub 2-0:1.0: USB hub found |
| 256 | [ 1.093201] hub 2-0:1.0: 4 ports detected |
| 257 | [ 1.093639] uhci_hcd: USB Universal Host Controller Interface driver |
| 258 | [ 1.094202] usbcore: registered new interface driver libusual |
| 259 | [ 1.094414] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| 260 | [ 1.096911] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 261 | [ 1.096949] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 262 | [ 1.097836] mousedev: PS/2 mouse device common for all mice |
| 263 | [ 1.103646] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| 264 | [ 1.103724] rtc0: alarms up to one day, 114 bytes nvram |
| 265 | [ 1.104281] device-mapper: uevent: version 1.0.3 |
| 266 | [ 1.104848] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com |
| 267 | [ 1.105026] EISA: Probing bus 0 at eisa.0 |
| 268 | [ 1.105059] Cannot allocate resource for EISA slot 1 |
| 269 | [ 1.105166] EISA: Detected 0 cards. |
| 270 | [ 1.105218] cpufreq-nforce2: No nForce2 chipset. |
| 271 | [ 1.105236] cpuidle: using governor ladder |
| 272 | [ 1.105253] cpuidle: using governor menu |
| 273 | [ 1.105269] EFI Variables Facility v0.08 2004-May-17 |
| 274 | [ 1.107399] TCP cubic registered |
| 275 | [ 1.108738] NET: Registered protocol family 10 |
| 276 | [ 1.162827] NET: Registered protocol family 17 |
| 277 | [ 1.162862] Registering the dns_resolver key type |
| 278 | [ 1.163006] Using IPI No-Shortcut mode |
| 279 | [ 1.166644] PM: Hibernation image not present or could not be loaded. |
| 280 | [ 1.166710] registered taskstats version 1 |
| 281 | [ 1.189336] Switching to clocksource tsc |
| 282 | [ 1.339212] isapnp: No Plug & Play device found |
| 283 | [ 3.491658] Freeing initrd memory: 13796k freed |
| 284 | [ 3.546080] Magic number: 15:750:92 |
| 285 | [ 3.546297] rtc_cmos rtc_cmos: setting system clock to 1999-12-01 20:05:54 UTC (944078754) |
| 286 | [ 3.546459] powernow-k8: Processor cpuid 5a2 not supported |
| 287 | [ 3.546483] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found |
| 288 | [ 3.546499] EDD information not available. |
| 289 | [ 3.547295] spurious 8259A interrupt: IRQ7. |
| 290 | [ 3.547438] Freeing unused kernel memory: 716k freed |
| 291 | [ 3.548547] Write protecting the kernel text: 5644k |
| 292 | [ 3.548889] Write protecting the kernel read-only data: 2252k |
| 293 | [ 3.666479] udevd[82]: starting version 175 |
| 294 | [ 4.292294] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker |
| 295 | [ 4.384618] via-rhine 0000:00:0d.0: eth0: VIA Rhine III (Management Adapter) at 0xfe02b000, 00:0d:b9:0c:d5:34, IRQ 10 |
| 296 | [ 4.385368] via-rhine 0000:00:0d.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1 |
| 297 | [ 4.385472] pata_amd 0000:00:0f.2: version 0.4.1 |
| 298 | [ 4.394528] scsi0 : pata_amd |
| 299 | [ 4.398526] scsi1 : pata_amd |
| 300 | [ 4.398952] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1ca0 irq 14 |
| 301 | [ 4.398977] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1ca8 irq 15 |
| 302 | [ 4.570858] ata1.00: CFA: LEXAR ATA FLASH CARD, 20100930, max UDMA/66 |
| 303 | [ 4.570889] ata1.00: 15630048 sectors, multi 0: LBA |
| 304 | [ 4.586774] ata1.00: configured for UDMA/66 |
| 305 | [ 4.587521] scsi 0:0:0:0: Direct-Access ATA LEXAR ATA FLASH 2010 PQ: 0 ANSI: 5 |
| 306 | [ 4.588789] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 307 | [ 4.589533] ata2: port disabled--ignoring |
| 308 | [ 4.589786] sd 0:0:0:0: [sda] 15630048 512-byte logical blocks: (8.00 GB/7.45 GiB) |
| 309 | [ 4.590101] sd 0:0:0:0: [sda] Write Protect is off |
| 310 | [ 4.590126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 311 | [ 4.590266] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| 312 | [ 4.593058] sda: sda1 sda2 < sda5 > |
| 313 | [ 4.596999] sd 0:0:0:0: [sda] Attached SCSI removable disk |
| 314 | [ 7.206599] Btrfs loaded |
| 315 | [ 7.249416] xor: measuring software checksum speed |
| 316 | [ 7.266644] 8regs : 394.000 MB/sec |
| 317 | [ 7.286631] 8regs_prefetch: 325.000 MB/sec |
| 318 | [ 7.306633] 32regs : 226.000 MB/sec |
| 319 | [ 7.326651] 32regs_prefetch: 188.000 MB/sec |
| 320 | [ 7.346641] pII_mmx : 853.000 MB/sec |
| 321 | [ 7.366638] p5_mmx : 673.000 MB/sec |
| 322 | [ 7.366656] xor: using function: pII_mmx (853.000 MB/sec) |
| 323 | [ 7.373447] device-mapper: dm-raid45: initialized v0.2594b |
| 324 | [ 7.384510] md: linear personality registered for level -1 |
| 325 | [ 7.395886] md: multipath personality registered for level -4 |
| 326 | [ 7.407109] md: raid0 personality registered for level 0 |
| 327 | [ 7.420022] md: raid1 personality registered for level 1 |
| 328 | [ 7.431299] async_tx: api initialized (async) |
| 329 | [ 7.507620] raid6: int32x1 65 MB/s |
| 330 | [ 7.574714] raid6: int32x2 74 MB/s |
| 331 | [ 7.643596] raid6: int32x4 66 MB/s |
| 332 | [ 7.710782] raid6: int32x8 69 MB/s |
| 333 | [ 7.779014] raid6: mmxx1 154 MB/s |
| 334 | [ 7.846885] raid6: mmxx2 228 MB/s |
| 335 | [ 7.914879] raid6: sse1x1 155 MB/s |
| 336 | [ 7.982739] raid6: sse1x2 220 MB/s |
| 337 | [ 7.982755] raid6: using algorithm sse1x2 (220 MB/s) |
| 338 | [ 7.994175] md: raid6 personality registered for level 6 |
| 339 | [ 7.994198] md: raid5 personality registered for level 5 |
| 340 | [ 7.994216] md: raid4 personality registered for level 4 |
| 341 | [ 8.027790] md: raid10 personality registered for level 10 |
| 342 | [ 8.281511] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) |
| 343 | [ 10.663544] Adding 389116k swap on /dev/mapper/alix--vg-swap_1. Priority:-1 extents:1 across:389116k |
| 344 | [ 10.703239] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro |
| 345 | [ 11.910167] ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 346 | [ 12.183677] udevd[456]: starting version 175 |
| 347 | [ 12.651175] lp: driver loaded but no devices found |
| 348 | [ 13.293484] AMD Geode RNG detected |
| 349 | [ 13.507259] geode-aes: GEODE AES engine enabled. |
| 350 | [ 13.583715] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1400-0x14ff] |
| 351 | [ 13.584051] cs5535-gpio cs5535-gpio: GPIO support successfully loaded. |
| 352 | [ 13.595714] cs5535-mfd 0000:00:0f.0: 5 devices registered. |
| 353 | [ 14.057054] cfg80211: Calling CRDA to update world regulatory domain |
| 354 | [ 14.071731] type=1400 audit(944078765.024:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=546 comm="apparmor_parser" |
| 355 | [ 14.079437] type=1400 audit(944078765.032:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=546 comm="apparmor_parser" |
| 356 | [ 14.090018] type=1400 audit(944078765.040:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=546 comm="apparmor_parser" |
| 357 | [ 14.622379] via-rhine 0000:00:0d.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 |
| 358 | [ 15.615442] device-mapper: multipath: version 1.3.2 loaded |
| 359 | [ 17.659791] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered |
| 360 | [ 17.716306] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: |
| 361 | [ 17.716340] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 362 | [ 17.716365] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: |
| 363 | [ 17.716394] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 364 | [ 17.716418] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: |
| 365 | [ 17.716447] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 366 | [ 17.716471] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: |
| 367 | [ 17.716500] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 368 | [ 17.716524] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: |
| 369 | [ 17.716624] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 370 | [ 17.716649] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: |
| 371 | [ 17.716678] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 372 | [ 17.716702] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: |
| 373 | [ 17.716731] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 374 | [ 17.716755] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: |
| 375 | [ 17.716784] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 376 | [ 17.716808] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: |
| 377 | [ 17.716837] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 378 | [ 17.716861] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: |
| 379 | [ 17.716890] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 380 | [ 17.716914] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: |
| 381 | [ 17.716943] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 382 | [ 17.716967] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: |
| 383 | [ 17.716997] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 384 | [ 17.717021] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: |
| 385 | [ 17.717050] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) |
| 386 | [ 17.717074] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: |
| 387 | [ 17.717103] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) |
| 388 | [ 17.770279] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 389 | [ 17.808798] Registered led device: rt2500pci-phy0::radio |
| 390 | [ 17.810645] Registered led device: rt2500pci-phy0::quality |
| 391 | [ 17.925691] snd_cs5535audio 0000:00:0f.3: setting latency timer to 64 |
| 392 | [ 18.113456] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: |
| 393 | [ 18.113492] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 394 | [ 18.113517] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: |
| 395 | [ 18.113546] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 396 | [ 18.113570] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: |
| 397 | [ 18.113599] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 398 | [ 18.113623] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: |
| 399 | [ 18.113652] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 400 | [ 18.113676] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: |
| 401 | [ 18.113705] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 402 | [ 18.113730] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: |
| 403 | [ 18.113759] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 404 | [ 18.113783] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: |
| 405 | [ 18.113812] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 406 | [ 18.113836] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: |
| 407 | [ 18.113865] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 408 | [ 18.113889] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: |
| 409 | [ 18.113918] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 410 | [ 18.113942] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: |
| 411 | [ 18.113971] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 412 | [ 18.113996] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: |
| 413 | [ 18.114025] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 414 | [ 18.114049] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: |
| 415 | [ 18.114078] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 416 | [ 18.114102] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: |
| 417 | [ 18.114131] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 418 | [ 18.114156] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: |
| 419 | [ 18.114185] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 420 | [ 18.114213] cfg80211: World regulatory domain updated: |
| 421 | [ 18.114229] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) |
| 422 | [ 18.114256] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 423 | [ 18.114283] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 424 | [ 18.114309] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 425 | [ 18.114336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 426 | [ 18.114363] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 427 | [ 18.239040] ath5k 0000:00:0e.0: registered as 'phy1' |
| 428 | [ 18.898039] ath: EEPROM regdomain: 0x20 |
| 429 | [ 18.898059] ath: EEPROM indicates we should expect a direct regpair map |
| 430 | [ 18.898085] ath: Country alpha2 being used: 00 |
| 431 | [ 18.898101] ath: Regpair used: 0x20 |
| 432 | [ 18.898123] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: |
| 433 | [ 18.898154] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 434 | [ 18.898177] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: |
| 435 | [ 18.898206] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 436 | [ 18.898229] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: |
| 437 | [ 18.898258] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 438 | [ 18.898282] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: |
| 439 | [ 18.898311] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 440 | [ 18.898334] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: |
| 441 | [ 18.898363] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 442 | [ 18.898386] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: |
| 443 | [ 18.898415] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 444 | [ 18.898438] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: |
| 445 | [ 18.898467] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 446 | [ 18.898490] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: |
| 447 | [ 18.898519] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 448 | [ 18.898542] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: |
| 449 | [ 18.898571] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 450 | [ 18.898595] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: |
| 451 | [ 18.898624] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 452 | [ 18.898647] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: |
| 453 | [ 18.898676] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 454 | [ 18.898699] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel |
| 455 | [ 18.898724] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel |
| 456 | [ 18.898749] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel |
| 457 | [ 18.904238] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: |
| 458 | [ 18.904272] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 459 | [ 18.904297] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: |
| 460 | [ 18.904326] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 461 | [ 18.904350] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: |
| 462 | [ 18.904379] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 463 | [ 18.904403] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: |
| 464 | [ 18.904432] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 465 | [ 18.904456] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: |
| 466 | [ 18.904485] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 467 | [ 18.904509] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: |
| 468 | [ 18.904538] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 469 | [ 18.904562] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: |
| 470 | [ 18.904591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 471 | [ 18.904615] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: |
| 472 | [ 18.904644] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 473 | [ 18.904668] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: |
| 474 | [ 18.904697] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 475 | [ 18.904721] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: |
| 476 | [ 18.904751] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 477 | [ 18.904775] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: |
| 478 | [ 18.904804] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 479 | [ 18.904828] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: |
| 480 | [ 18.904857] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 481 | [ 18.904881] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: |
| 482 | [ 18.904910] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 483 | [ 18.904935] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: |
| 484 | [ 18.904964] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 485 | [ 18.906024] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' |
| 486 | [ 18.921556] ath5k phy1: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) |
| 487 | [ 18.953782] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: |
| 488 | [ 18.953817] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 489 | [ 18.953842] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: |
| 490 | [ 18.953871] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 491 | [ 18.953895] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: |
| 492 | [ 18.953924] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 493 | [ 18.953948] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: |
| 494 | [ 18.953977] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 495 | [ 18.954001] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: |
| 496 | [ 18.954031] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 497 | [ 18.954055] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: |
| 498 | [ 18.954084] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 499 | [ 18.954108] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: |
| 500 | [ 18.954137] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 501 | [ 18.954161] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: |
| 502 | [ 18.954190] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 503 | [ 18.954214] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: |
| 504 | [ 18.954243] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 505 | [ 18.954267] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: |
| 506 | [ 18.954296] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 507 | [ 18.954320] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: |
| 508 | [ 18.954350] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 509 | [ 18.954374] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: |
| 510 | [ 18.954403] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 511 | [ 18.954427] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: |
| 512 | [ 18.954456] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 513 | [ 18.954480] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: |
| 514 | [ 18.954510] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 515 | [ 19.092465] ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 516 | [ 19.528367] init: udev-fallback-graphics main process (814) terminated with status 1 |
| 517 | [ 20.125787] init: failsafe main process (699) killed by TERM signal |
| 518 | [ 20.370076] type=1400 audit(944078771.320:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=900 comm="apparmor_parser" |
| 519 | [ 20.375571] type=1400 audit(944078771.324:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser" |
| 520 | [ 20.378840] type=1400 audit(944078771.328:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser" |
| 521 | [ 22.868282] cfg80211: Calling CRDA for country: FR |
| 522 | [ 23.022755] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: |
| 523 | [ 23.022792] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 524 | [ 23.022816] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: |
| 525 | [ 23.022845] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 526 | [ 23.022868] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: |
| 527 | [ 23.022897] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 528 | [ 23.022920] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: |
| 529 | [ 23.022949] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 530 | [ 23.022972] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: |
| 531 | [ 23.023001] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 532 | [ 23.023024] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: |
| 533 | [ 23.023053] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 534 | [ 23.023076] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: |
| 535 | [ 23.023106] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 536 | [ 23.023129] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: |
| 537 | [ 23.023158] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 538 | [ 23.023181] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: |
| 539 | [ 23.023210] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 540 | [ 23.023233] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: |
| 541 | [ 23.023262] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 542 | [ 23.023285] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: |
| 543 | [ 23.023314] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 544 | [ 23.023337] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: |
| 545 | [ 23.023366] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 546 | [ 23.023389] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: |
| 547 | [ 23.023418] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 548 | [ 23.023439] cfg80211: Disabling freq 2484 MHz |
| 549 | [ 23.023469] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: |
| 550 | [ 23.023499] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 551 | [ 23.023522] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: |
| 552 | [ 23.023551] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 553 | [ 23.023574] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: |
| 554 | [ 23.023603] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 555 | [ 23.023626] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: |
| 556 | [ 23.023655] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 557 | [ 23.023679] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: |
| 558 | [ 23.023708] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 559 | [ 23.023731] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: |
| 560 | [ 23.023760] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 561 | [ 23.023783] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: |
| 562 | [ 23.023812] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 563 | [ 23.023835] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: |
| 564 | [ 23.023864] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 565 | [ 23.023955] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: |
| 566 | [ 23.023985] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 567 | [ 23.024008] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: |
| 568 | [ 23.024037] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 569 | [ 23.024060] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: |
| 570 | [ 23.024089] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 571 | [ 23.024112] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: |
| 572 | [ 23.024141] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 573 | [ 23.024164] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: |
| 574 | [ 23.024193] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) |
| 575 | [ 23.024214] cfg80211: Disabling freq 2484 MHz |
| 576 | [ 23.024238] cfg80211: Regulatory domain changed to country: FR |
| 577 | [ 23.024256] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) |
| 578 | [ 23.024281] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) |
| 579 | [ 23.024306] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) |
| 580 | [ 23.024331] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) |
| 581 | [ 23.024355] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) |
| 582 | [ 24.768039] eth0: no IPv6 routers present |
| 583 | [ 33.264719] wlan0: no IPv6 routers present |
| 584 | [ 139.608497] init: ttyS0 main process ended, respawning |