blob: d322de5226f218aad672119ec1d20add13055f3d [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standc0cdb7f2016-05-13 16:09:07 +00001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: Emulation QEMU x86 q35/ich9/QEMU x86 q35/ich9, BIOS 4.3-1079-g0b4db13-dirty 05/13/2016
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
39[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
40[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1ee00000-0x1effffff]
42[ 0.000000] [mem 0x1ee00000-0x1effffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1edfffff]
44[ 0.000000] [mem 0x1c000000-0x1edfffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f000000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f0c7000-0x1fe79fff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB10E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFB2DC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB1280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150619)
58[ 0.000000] ACPI: FACS 0x000000001FFB1240 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFB2EC0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFB2F00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFB2F40 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFB2FA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e000000-ffff88001e7fffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001ee00000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1ee0d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 489580K/523512K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 33932K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008000] ACPI: Core revision 20140424
131[ 0.008975] ACPI: All ACPI Tables successfully acquired
132[ 0.009869] Security Framework initialized
133[ 0.010534] AppArmor: AppArmor disabled by boot time parameter
134[ 0.011443] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.012058] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.013422] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.014633] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.016008] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.017396] Initializing cgroup subsys memory
140[ 0.018083] Initializing cgroup subsys devices
141[ 0.018788] Initializing cgroup subsys freezer
142[ 0.019495] Initializing cgroup subsys net_cls
143[ 0.020012] Initializing cgroup subsys blkio
144[ 0.020663] Initializing cgroup subsys perf_event
145[ 0.021373] Initializing cgroup subsys net_prio
146[ 0.022147] mce: CPU supports 10 MCE banks
147[ 0.022844] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.040466] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
151[ 0.045927] ftrace: allocating 21614 entries in 85 pages
152[ 0.053415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.054302] smpboot: CPU0: AMD Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
154[ 0.060000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.060000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.060086] x86: Booted up 1 node, 1 CPUs
157[ 0.060703] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.061994] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.063089] devtmpfs: initialized
160[ 0.069933] pinctrl core: initialized pinctrl subsystem
161[ 0.070798] NET: Registered protocol family 16
162[ 0.071603] cpuidle: using governor ladder
163[ 0.072015] cpuidle: using governor menu
164[ 0.072706] ACPI: bus type PCI registered
165[ 0.073298] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.074364] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.075731] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.076568] PCI: Using configuration type 1 for base access
169[ 0.078457] ACPI: Added _OSI(Module Device)
170[ 0.080003] ACPI: Added _OSI(Processor Device)
171[ 0.080697] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.081424] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.086533] ACPI: Interpreter enabled
174[ 0.087122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.088354] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.089800] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.091252] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.092782] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.094134] ACPI: (supports S0)
180[ 0.094588] ACPI: Using IOAPIC for interrupt routing
181[ 0.095332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.098171] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.099117] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.100283] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.101550] PCI host bridge to bus 0000:00
186[ 0.102143] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.104003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.104885] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.105767] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.106747] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.107770] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.108153] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.111044] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.113254] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.125175] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.125362] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.128006] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.130213] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.141129] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.141468] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.141814] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.143000] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.144188] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.156006] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.158227] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.160351] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.160531] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.161109] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.162169] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.163212] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.164388] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.165424] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.166461] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.167527] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.168386] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.169363] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.170165] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.170965] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.172154] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.173003] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.173851] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.174697] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.175553] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.176360] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.177346] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.178229] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.180006] vgaarb: loaded
228[ 0.180431] vgaarb: bridge control possible 0000:00:01.0
229[ 0.181325] PCI: Using ACPI for IRQ routing
230[ 0.234962] PCI: pci_cache_line_size set to 64 bytes
231[ 0.235052] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.235055] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
233[ 0.235265] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.236019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.236843] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.241148] Switched to clocksource kvm-clock
237[ 0.249080] pnp: PnP ACPI init
238[ 0.249629] ACPI: bus type PNP registered
239[ 0.250342] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.250435] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.250494] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.250621] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.250703] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.251056] pnp: PnP ACPI: found 5 devices
245[ 0.251666] ACPI: bus type PNP unregistered
246[ 0.259593] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.260553] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.260556] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.260558] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.260560] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.260604] NET: Registered protocol family 2
252[ 0.261466] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.262504] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.263448] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.264413] TCP: reno registered
256[ 0.264886] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.265723] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.266724] NET: Registered protocol family 1
259[ 0.267440] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.267484] PCI: CLS 64 bytes, default 64
261[ 0.267545] Unpacking initramfs...
262[ 0.599149] Freeing initrd memory: 14028K (ffff88001f0c7000 - ffff88001fe7a000)
263[ 0.600518] microcode: AMD CPU family 0x6 not supported
264[ 0.601610] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.602545] audit: initializing netlink subsys (disabled)
266[ 0.603345] audit: type=2000 audit(1463155564.337:1): initialized
267[ 0.604669] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.605630] zbud: loaded
269[ 0.606144] VFS: Disk quotas dquot_6.5.2
270[ 0.606751] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.607742] msgmni has been set to 983
272[ 0.608633] alg: No test for stdrng (krng)
273[ 0.609261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.610373] io scheduler noop registered
275[ 0.610964] io scheduler deadline registered
276[ 0.611607] io scheduler cfq registered (default)
277[ 0.612387] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.613230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.614245] GHES: HEST is not enabled!
280[ 0.614954] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.638742] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.640244] Linux agpgart interface v0.103
283[ 0.640986] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.642855] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.643575] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.644496] mousedev: PS/2 mouse device common for all mice
287[ 0.645603] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.647054] rtc_cmos 00:00: RTC can wake from S4
289[ 0.647995] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.649074] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.650218] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.651265] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.652255] AMD IOMMUv2 functionality not available on this system
294[ 0.653291] TCP: cubic registered
295[ 0.653814] NET: Registered protocol family 10
296[ 0.655016] mip6: Mobile IPv6
297[ 0.655805] NET: Registered protocol family 17
298[ 0.657001] mpls_gso: MPLS GSO support
299[ 0.658398] registered taskstats version 1
300[ 0.659932] rtc_cmos 00:00: setting system clock to 2016-05-13 16:06:04 UTC (1463155564)
301[ 0.662065] PM: Hibernation image not present or could not be loaded.
302[ 0.663921] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
303[ 0.665222] Write protecting the kernel read-only data: 8192k
304[ 0.668823] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
305[ 0.670631] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.684251] systemd-udevd[52]: starting version 215
307[ 0.685373] random: systemd-udevd urandom read with 2 bits of entropy available
308[ 0.699270] SCSI subsystem initialized
309[ 0.702432] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
310[ 0.703505] e1000: Copyright (c) 1999-2006 Intel Corporation.
311[ 0.708770] Floppy drive(s): fd0 is 1.44M
312[ 0.715891] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
313[ 0.724450] FDC 0 is a S82078B
314[ 0.728235] libata version 3.00 loaded.
315[ 1.055391] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
316[ 1.057459] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
317[ 1.059453] ahci 0000:00:1f.2: version 3.0
318[ 1.060071] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
319[ 1.061934] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
320[ 1.062620] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
321[ 1.064960] ahci 0000:00:1f.2: flags: ncq only
322[ 1.070727] scsi0 : ahci
323[ 1.071375] scsi1 : ahci
324[ 1.071934] scsi2 : ahci
325[ 1.072520] scsi3 : ahci
326[ 1.073071] scsi4 : ahci
327[ 1.073603] scsi5 : ahci
328[ 1.074107] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
329[ 1.075258] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
330[ 1.076414] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
331[ 1.077520] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
332[ 1.078658] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
333[ 1.079767] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
334[ 1.400203] ata5: SATA link down (SStatus 0 SControl 300)
335[ 1.401880] ata1: SATA link down (SStatus 0 SControl 300)
336[ 1.403464] ata2: SATA link down (SStatus 0 SControl 300)
337[ 1.405035] ata3: SATA link down (SStatus 0 SControl 300)
338[ 1.406557] ata4: SATA link down (SStatus 0 SControl 300)
339[ 1.407458] ata6: SATA link down (SStatus 0 SControl 300)
340[ 1.424664] FS-Cache: Loaded
341[ 1.429844] RPC: Registered named UNIX socket transport module.
342[ 1.430798] RPC: Registered udp transport module.
343[ 1.431472] RPC: Registered tcp transport module.
344[ 1.432168] RPC: Registered tcp NFSv4.1 backchannel transport module.
345[ 1.439452] FS-Cache: Netfs 'nfs' registered for caching
346[ 1.449718] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
347[ 1.600127] tsc: Refined TSC clocksource calibration: 2312.024 MHz
348[ 3.452781] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
349[ 3.455097] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
350[ 4.577824] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
351[ 4.581400] systemd[1]: Detected virtualization 'kvm'.
352[ 4.582731] systemd[1]: Detected architecture 'x86-64'.
353[ 4.617465] systemd[1]: Inserted module 'autofs4'
354[ 4.619729] systemd[1]: Set hostname to <cb-test-tgt>.
355[ 4.831121] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
356[ 4.833205] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
357[ 4.836042] systemd[1]: Expecting device dev-ttyS0.device...
358[ 4.838259] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
359[ 4.839460] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
360[ 4.840627] systemd[1]: Starting Remote File Systems (Pre).
361[ 4.842934] systemd[1]: Reached target Remote File Systems (Pre).
362[ 4.843878] systemd[1]: Starting Encrypted Volumes.
363[ 4.845972] systemd[1]: Reached target Encrypted Volumes.
364[ 4.846817] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
365[ 4.849925] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
366[ 4.851343] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
367[ 4.852604] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
368[ 4.853801] systemd[1]: Starting Paths.
369[ 4.855606] systemd[1]: Reached target Paths.
370[ 4.856315] systemd[1]: Starting Swap.
371[ 4.858098] systemd[1]: Reached target Swap.
372[ 4.858765] systemd[1]: Starting Root Slice.
373[ 4.860734] systemd[1]: Created slice Root Slice.
374[ 4.862039] systemd[1]: Starting Delayed Shutdown Socket.
375[ 4.864833] systemd[1]: Listening on Delayed Shutdown Socket.
376[ 4.865811] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
377[ 4.869094] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
378[ 4.870260] systemd[1]: Starting Journal Socket (/dev/log).
379[ 4.874125] systemd[1]: Listening on Journal Socket (/dev/log).
380[ 4.875577] systemd[1]: Starting udev Kernel Socket.
381[ 4.878461] systemd[1]: Listening on udev Kernel Socket.
382[ 4.879565] systemd[1]: Starting udev Control Socket.
383[ 4.882388] systemd[1]: Listening on udev Control Socket.
384[ 4.883482] systemd[1]: Starting User and Session Slice.
385[ 4.886540] systemd[1]: Created slice User and Session Slice.
386[ 4.887552] systemd[1]: Starting Journal Socket.
387[ 4.889920] systemd[1]: Listening on Journal Socket.
388[ 4.890825] systemd[1]: Starting System Slice.
389[ 4.893170] systemd[1]: Created slice System Slice.
390[ 4.894055] systemd[1]: Starting Increase datagram queue length...
391[ 4.897281] systemd[1]: Starting udev Coldplug all Devices...
392[ 4.905019] systemd[1]: Starting Load Kernel Modules...
393[ 4.947800] systemd[1]: Started Set Up Additional Binary Formats.
394[ 4.956247] systemd[1]: Mounting Debug File System...
395[ 4.966188] systemd[1]: Starting Create list of required static device nodes for the current kernel...
396[ 4.988861] systemd[1]: Mounting POSIX Message Queue File System...
397[ 4.993552] systemd[1]: Mounting Huge Pages File System...
398[ 5.007490] systemd[1]: Starting system-getty.slice.
399[ 5.020068] systemd[1]: Created slice system-getty.slice.
400[ 5.020989] systemd[1]: Starting system-serial\x2dgetty.slice.
401[ 5.026455] systemd[1]: Created slice system-serial\x2dgetty.slice.
402[ 5.027522] systemd[1]: Starting Slices.
403[ 5.031234] systemd[1]: Reached target Slices.
404[ 5.031950] systemd[1]: Starting Remount Root and Kernel File Systems...
405[ 5.036696] systemd[1]: Mounted Huge Pages File System.
406[ 5.042582] systemd[1]: Mounted POSIX Message Queue File System.
407[ 5.045286] systemd[1]: Mounted Debug File System.
408[ 5.048205] systemd[1]: Started Increase datagram queue length.
409[ 5.052349] systemd[1]: Started Load Kernel Modules.
410[ 5.056964] systemd[1]: Started Create list of required static device nodes for the current kernel.
411[ 5.064377] systemd[1]: Started Remount Root and Kernel File Systems.
412[ 5.077179] systemd[1]: Started udev Coldplug all Devices.
413[ 5.107213] systemd[1]: Started Various fixups to make systemd work better on Debian.
414[ 5.108465] systemd[1]: Starting Load/Save Random Seed...
415[ 5.111126] systemd[1]: Starting Create Static Device Nodes in /dev...
416[ 5.113892] systemd[1]: Starting Apply Kernel Variables...
417[ 5.120596] systemd[1]: Mounted Configuration File System.
418[ 5.121486] systemd[1]: Mounted FUSE Control File System.
419[ 5.122316] systemd[1]: Starting Syslog Socket.
420[ 5.137408] systemd[1]: Listening on Syslog Socket.
421[ 5.138232] systemd[1]: Starting Sockets.
422[ 5.148328] systemd[1]: Reached target Sockets.
423[ 5.149054] systemd[1]: Starting Journal Service...
424[ 5.165535] systemd[1]: Started Journal Service.
425[ 5.242333] systemd-udevd[149]: starting version 215
426[ 5.527769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
427[ 5.529178] ACPI: Power Button [PWRF]
428[ 5.558898] [drm] Initialized drm 1.1.0 20060810
429[ 5.563895] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
430[ 5.566398] i801_smbus 0000:00:1f.3: Enabling SMBus device
431[ 5.567315] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
432[ 5.575130] input: PC Speaker as /devices/platform/pcspkr/input/input3
433[ 5.580850] parport_pc 00:03: reported by Plug and Play ACPI
434[ 5.581839] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
435[ 5.679843] iTCO_vendor_support: vendor-support=0
436[ 5.682404] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
437[ 5.683310] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
438[ 5.684376] iTCO_wdt: timeout value out of range, using 30
439[ 5.713339] ppdev: user-space parallel port driver
440[ 5.714875] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
441[ 5.930465] Key type dns_resolver registered
442[ 5.952071] NFS: Registering the id_resolver key type
443[ 5.953252] Key type id_resolver registered
444[ 5.954135] Key type id_legacy registered
445[ 6.154858] systemd-journald[147]: Received request to flush runtime journal from PID 1
446[ 6.188086] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
447[ 6.233987] random: nonblocking pool is initialized
448[ 6.434110] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
449[ 36.375965] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****