Gitiles
Code Review Sign In
review.coreboot.org / board-status / 4197ce80b2c5e2aa7df92b64321e7e8c1fe45f8a / . / emulation / qemu-q35 / 4.1-611-ga9992d3 / 2015-09-21T13:01:22Z / kernel_log.txt
blob: bd62d216872954753dbed93863c8d62fbb0b02dd [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standbaaa0bf2015-09-21 15:25:49 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9991-g4d6db95-dirty 06/13/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
42[ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
44[ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFBAED0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFBAF10 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFBAF70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008000] ACPI: Core revision 20140424
131[ 0.009080] ACPI: All ACPI Tables successfully acquired
132[ 0.010007] Security Framework initialized
133[ 0.010686] AppArmor: AppArmor disabled by boot time parameter
134[ 0.011614] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.012088] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.013448] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.014660] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.016009] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.017436] Initializing cgroup subsys memory
140[ 0.018165] Initializing cgroup subsys devices
141[ 0.018893] Initializing cgroup subsys freezer
142[ 0.020008] Initializing cgroup subsys net_cls
143[ 0.020728] Initializing cgroup subsys blkio
144[ 0.021425] Initializing cgroup subsys perf_event
145[ 0.022235] Initializing cgroup subsys net_prio
146[ 0.023085] mce: CPU supports 10 MCE banks
147[ 0.024008] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.035591] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.041431] ftrace: allocating 21601 entries in 85 pages
152[ 0.049780] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.052003] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
154[ 0.056000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.056000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.056466] x86: Booted up 1 node, 1 CPUs
157[ 0.057109] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.058597] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.059752] devtmpfs: initialized
160[ 0.066830] pinctrl core: initialized pinctrl subsystem
161[ 0.067729] NET: Registered protocol family 16
162[ 0.068183] cpuidle: using governor ladder
163[ 0.068823] cpuidle: using governor menu
164[ 0.069568] ACPI: bus type PCI registered
165[ 0.070196] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.071334] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.072006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.073552] PCI: Using configuration type 1 for base access
169[ 0.076669] ACPI: Added _OSI(Module Device)
170[ 0.077321] ACPI: Added _OSI(Processor Device)
171[ 0.078009] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.078724] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.083860] ACPI: Interpreter enabled
174[ 0.084010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.085435] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.086845] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.088343] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.089796] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.091201] ACPI: (supports S0)
180[ 0.092002] ACPI: Using IOAPIC for interrupt routing
181[ 0.092795] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.097037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.097977] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.099460] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.100121] PCI host bridge to bus 0000:00
186[ 0.100750] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.101585] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.102502] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.104003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.105025] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.106091] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.106534] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.109626] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.112007] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.126667] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.126888] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.132016] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.136010] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.150621] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.151098] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.152029] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.153262] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.154603] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.166435] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.169228] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.172448] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.172662] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.173297] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.174407] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.175480] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.176418] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.177514] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.178606] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.179684] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.180412] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.181416] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.182244] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.183065] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.184151] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.184974] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.186098] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.187574] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.188286] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.190284] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.192256] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.193796] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.196004] vgaarb: loaded
228[ 0.196748] vgaarb: bridge control possible 0000:00:01.0
229[ 0.197876] PCI: Using ACPI for IRQ routing
230[ 0.252693] PCI: pci_cache_line_size set to 64 bytes
231[ 0.252806] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.252809] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
233[ 0.253018] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.254100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.254900] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.260103] Switched to clocksource kvm-clock
237[ 0.269454] pnp: PnP ACPI init
238[ 0.270102] ACPI: bus type PNP registered
239[ 0.270851] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.270934] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.270992] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.271130] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.271221] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.271618] pnp: PnP ACPI: found 5 devices
245[ 0.272280] ACPI: bus type PNP unregistered
246[ 0.280388] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.281368] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.281371] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.281373] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.281375] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.281414] NET: Registered protocol family 2
252[ 0.282340] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.283406] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.284423] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.285427] TCP: reno registered
256[ 0.285940] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.286821] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.287808] NET: Registered protocol family 1
259[ 0.288527] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.288585] PCI: CLS 64 bytes, default 64
261[ 0.288649] Unpacking initramfs...
262[ 0.491980] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000)
263[ 0.493475] microcode: AMD CPU family 0x6 not supported
264[ 0.494632] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.495589] audit: initializing netlink subsys (disabled)
266[ 0.496456] audit: type=2000 audit(1442848231.287:1): initialized
267[ 0.497749] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.498833] zbud: loaded
269[ 0.499395] VFS: Disk quotas dquot_6.5.2
270[ 0.500077] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.501164] msgmni has been set to 983
272[ 0.502109] alg: No test for stdrng (krng)
273[ 0.502812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.504072] io scheduler noop registered
275[ 0.504719] io scheduler deadline registered
276[ 0.505443] io scheduler cfq registered (default)
277[ 0.506310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.507244] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.508412] GHES: HEST is not enabled!
280[ 0.509114] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.533245] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.534853] Linux agpgart interface v0.103
283[ 0.535656] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.537894] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.538703] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.539645] mousedev: PS/2 mouse device common for all mice
287[ 0.540992] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.542625] rtc_cmos 00:00: RTC can wake from S4
289[ 0.543763] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.544990] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.546291] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.547316] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.548316] AMD IOMMUv2 functionality not available on this system
294[ 0.549373] TCP: cubic registered
295[ 0.549917] NET: Registered protocol family 10
296[ 0.550826] mip6: Mobile IPv6
297[ 0.551306] NET: Registered protocol family 17
298[ 0.551996] mpls_gso: MPLS GSO support
299[ 0.552860] registered taskstats version 1
300[ 0.553862] rtc_cmos 00:00: setting system clock to 2015-09-21 15:10:31 UTC (1442848231)
301[ 0.555135] PM: Hibernation image not present or could not be loaded.
302[ 0.556997] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
303[ 0.558255] Write protecting the kernel read-only data: 8192k
304[ 0.562049] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
305[ 0.563935] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.576281] systemd-udevd[52]: starting version 215
307[ 0.577540] random: systemd-udevd urandom read with 1 bits of entropy available
308[ 0.590140] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 0.591325] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 0.603786] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
311[ 0.992143] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
312[ 0.993249] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
313[ 1.002149] FS-Cache: Loaded
314[ 1.006390] RPC: Registered named UNIX socket transport module.
315[ 1.007350] RPC: Registered udp transport module.
316[ 1.008078] RPC: Registered tcp transport module.
317[ 1.008797] RPC: Registered tcp NFSv4.1 backchannel transport module.
318[ 1.014561] FS-Cache: Netfs 'nfs' registered for caching
319[ 1.025737] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
320[ 1.492130] tsc: Refined TSC clocksource calibration: 2312.017 MHz
321[ 3.028752] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
322[ 3.031697] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
323[ 8.687236] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
324[ 8.690762] systemd[1]: Detected virtualization 'kvm'.
325[ 8.692105] systemd[1]: Detected architecture 'x86-64'.
326[ 10.938579] systemd[1]: Inserted module 'autofs4'
327[ 10.943996] systemd[1]: Set hostname to <cb-test-tgt>.
328[ 11.078330] random: nonblocking pool is initialized
329[ 14.085952] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 14.089279] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 14.093815] systemd[1]: Expecting device dev-ttyS0.device...
332[ 14.096501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
333[ 14.097716] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
334[ 14.098905] systemd[1]: Starting Remote File Systems (Pre).
335[ 14.101430] systemd[1]: Reached target Remote File Systems (Pre).
336[ 14.102382] systemd[1]: Starting Encrypted Volumes.
337[ 14.104785] systemd[1]: Reached target Encrypted Volumes.
338[ 14.105631] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
339[ 14.106896] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
340[ 14.108135] systemd[1]: Starting Paths.
341[ 14.110184] systemd[1]: Reached target Paths.
342[ 14.110886] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
343[ 14.114228] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
344[ 14.115684] systemd[1]: Starting Swap.
345[ 14.117736] systemd[1]: Reached target Swap.
346[ 14.118429] systemd[1]: Starting Root Slice.
347[ 14.120632] systemd[1]: Created slice Root Slice.
348[ 14.121375] systemd[1]: Starting Delayed Shutdown Socket.
349[ 14.123862] systemd[1]: Listening on Delayed Shutdown Socket.
350[ 14.124884] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
351[ 14.129187] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
352[ 14.130265] systemd[1]: Starting Journal Socket (/dev/log).
353[ 14.134388] systemd[1]: Listening on Journal Socket (/dev/log).
354[ 14.135314] systemd[1]: Starting udev Kernel Socket.
355[ 14.137657] systemd[1]: Listening on udev Kernel Socket.
356[ 14.138510] systemd[1]: Starting udev Control Socket.
357[ 14.140924] systemd[1]: Listening on udev Control Socket.
358[ 14.141762] systemd[1]: Starting User and Session Slice.
359[ 14.144276] systemd[1]: Created slice User and Session Slice.
360[ 14.145164] systemd[1]: Starting Journal Socket.
361[ 14.147395] systemd[1]: Listening on Journal Socket.
362[ 14.148207] systemd[1]: Starting System Slice.
363[ 14.150425] systemd[1]: Created slice System Slice.
364[ 14.151215] systemd[1]: Starting Increase datagram queue length...
365[ 14.154132] systemd[1]: Mounting Debug File System...
366[ 14.156715] systemd[1]: Mounting POSIX Message Queue File System...
367[ 14.261596] systemd[1]: Starting Load Kernel Modules...
368[ 14.765662] systemd[1]: Started Set Up Additional Binary Formats.
369[ 14.784500] systemd[1]: Starting Create list of required static device nodes for the current kernel...
370[ 14.791645] systemd[1]: Starting udev Coldplug all Devices...
371[ 14.796346] systemd[1]: Mounting Huge Pages File System...
372[ 14.799321] systemd[1]: Starting system-getty.slice.
373[ 14.804045] systemd[1]: Created slice system-getty.slice.
374[ 14.805405] systemd[1]: Starting system-serial\x2dgetty.slice.
375[ 14.809431] systemd[1]: Created slice system-serial\x2dgetty.slice.
376[ 14.811007] systemd[1]: Starting Slices.
377[ 14.813344] systemd[1]: Reached target Slices.
378[ 14.814074] systemd[1]: Starting Remount Root and Kernel File Systems...
379[ 16.225659] systemd[1]: Started Increase datagram queue length.
380[ 16.227560] systemd[1]: Starting Syslog Socket.
381[ 16.230994] systemd[1]: Listening on Syslog Socket.
382[ 16.231774] systemd[1]: Starting Sockets.
383[ 16.233921] systemd[1]: Reached target Sockets.
384[ 16.234642] systemd[1]: Starting Journal Service...
385[ 16.238799] systemd[1]: Started Journal Service.
386[ 19.774370] systemd-udevd[121]: starting version 215
387[ 29.304102] nfs: server 10.100.1.1 not responding, still trying
388[ 29.305960] nfs: server 10.100.1.1 not responding, still trying
389[ 29.307812] nfs: server 10.100.1.1 not responding, still trying
390[ 29.310107] nfs: server 10.100.1.1 not responding, still trying
391[ 29.311046] nfs: server 10.100.1.1 not responding, still trying
392[ 29.311945] nfs: server 10.100.1.1 not responding, still trying
393[ 29.313063] nfs: server 10.100.1.1 not responding, still trying
394[ 29.314101] nfs: server 10.100.1.1 not responding, still trying
395[ 29.315682] nfs: server 10.100.1.1 OK
396[ 29.349352] nfs: server 10.100.1.1 OK
397[ 29.437425] nfs: server 10.100.1.1 OK
398[ 29.511531] nfs: server 10.100.1.1 OK
399[ 29.570324] nfs: server 10.100.1.1 OK
400[ 29.635292] nfs: server 10.100.1.1 OK
401[ 29.687973] nfs: server 10.100.1.1 OK
402[ 29.742271] nfs: server 10.100.1.1 OK
403[ 32.016127] nfs: server 10.100.1.1 not responding, still trying
404[ 32.018168] nfs: server 10.100.1.1 not responding, still trying
405[ 32.019974] nfs: server 10.100.1.1 not responding, still trying
406[ 32.022216] nfs: server 10.100.1.1 not responding, still trying
407[ 32.097290] nfs: server 10.100.1.1 OK
408[ 32.138442] nfs: server 10.100.1.1 OK
409[ 32.215503] nfs: server 10.100.1.1 OK
410[ 32.241332] nfs: server 10.100.1.1 OK
411[ 32.272101] nfs: server 10.100.1.1 not responding, still trying
412[ 32.342331] nfs: server 10.100.1.1 OK
413[ 35.913545] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
414[ 35.918145] ACPI: Power Button [PWRF]
415[ 36.581492] Floppy drive(s): fd0 is 1.44M
416[ 36.596805] FDC 0 is a S82078B
417[ 37.114015] SCSI subsystem initialized
418[ 37.124674] input: PC Speaker as /devices/platform/pcspkr/input/input3
419[ 37.626436] parport_pc 00:03: reported by Plug and Play ACPI
420[ 37.631014] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
421[ 38.430841] libata version 3.00 loaded.
422[ 39.303847] [drm] Initialized drm 1.1.0 20060810
423[ 39.733990] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
424[ 40.136862] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
425[ 40.143389] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
426[ 40.146068] i801_smbus 0000:00:1f.3: Enabling SMBus device
427[ 40.147082] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
428[ 40.541734] ahci 0000:00:1f.2: version 3.0
429[ 40.543286] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
430[ 40.544317] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
431[ 40.546445] ahci 0000:00:1f.2: flags: ncq only
432[ 40.553238] scsi0 : ahci
433[ 40.554258] scsi1 : ahci
434[ 40.554863] scsi2 : ahci
435[ 40.555472] scsi3 : ahci
436[ 40.556388] scsi4 : ahci
437[ 40.557013] scsi5 : ahci
438[ 40.557536] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
439[ 40.558670] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
440[ 40.559770] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
441[ 40.560904] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
442[ 40.562013] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
443[ 40.563119] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
444[ 40.884279] ata4: SATA link down (SStatus 0 SControl 300)
445[ 40.886068] ata3: SATA link down (SStatus 0 SControl 300)
446[ 40.887759] ata1: SATA link down (SStatus 0 SControl 300)
447[ 40.889907] ata6: SATA link down (SStatus 0 SControl 300)
448[ 40.890934] ata5: SATA link down (SStatus 0 SControl 300)
449[ 40.891945] ata2: SATA link down (SStatus 0 SControl 300)
450[ 42.365279] iTCO_vendor_support: vendor-support=0
451[ 42.368587] ppdev: user-space parallel port driver
452[ 42.373685] kvm: Nested Virtualization enabled
453[ 42.427267] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
454[ 42.429728] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
455[ 42.431624] iTCO_wdt: timeout value out of range, using 30
456[ 42.434911] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
457[ 48.928935] Key type dns_resolver registered
458[ 49.660644] NFS: Registering the id_resolver key type
459[ 49.661573] Key type id_resolver registered
460[ 49.662271] Key type id_legacy registered
461[ 53.208835] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
462[ 86.289953] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
463[ 133.953832] systemd-journald[107]: Received request to flush runtime journal from PID 1
464[ 138.424067] nfs: server 10.100.1.1 not responding, still trying
465[ 139.743322] nfs: server 10.100.1.1 OK