Sergej Ivanov | c943083 | 2019-12-13 19:09:21 +0300 | [diff] [blame] | 1 | sudo: unable to resolve host BiostarTest |
| 2 | [ 0.000000] Linux version 4.15.0-45-generic (buildd@lcy01-amd64-027) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #48~16.04.1-Ubuntu SMP Tue Jan 29 18:03:48 UTC 2019 (Ubuntu 4.15.0-45.48~16.04.1-generic 4.15.18) |
| 3 | [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-45-generic root=UUID=ca091366-d83f-47c0-b37a-012f03cec05f ro quiet splash vt.handoff=7 |
| 4 | [ 0.000000] KERNEL supported cpus: |
| 5 | [ 0.000000] Intel GenuineIntel |
| 6 | [ 0.000000] AMD AuthenticAMD |
| 7 | [ 0.000000] Centaur CentaurHauls |
| 8 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| 9 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| 10 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| 11 | [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| 12 | [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| 13 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 14 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 15 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 16 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 17 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fd2dfff] usable |
| 18 | [ 0.000000] BIOS-e820: [mem 0x000000005fd2e000-0x000000007fffffff] reserved |
| 19 | [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| 20 | [ 0.000000] NX (Execute Disable) protection: active |
| 21 | [ 0.000000] SMBIOS 2.8 present. |
| 22 | [ 0.000000] DMI: Biostar AM1ML/AM1ML, BIOS 4.11-412-g12a651c 12/13/2019 |
| 23 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 24 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 25 | [ 0.000000] e820: last_pfn = 0x5fd2e max_arch_pfn = 0x400000000 |
| 26 | [ 0.000000] MTRR default type: uncachable |
| 27 | [ 0.000000] MTRR fixed ranges enabled: |
| 28 | [ 0.000000] 00000-9FFFF write-back |
| 29 | [ 0.000000] A0000-BFFFF uncachable |
| 30 | [ 0.000000] C0000-FFFFF write-back |
| 31 | [ 0.000000] MTRR variable ranges enabled: |
| 32 | [ 0.000000] 0 base 00FFC00000 mask FFFFC00000 write-protect |
| 33 | [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back |
| 34 | [ 0.000000] 2 base 0000000000 mask FFC0000000 write-back |
| 35 | [ 0.000000] 3 disabled |
| 36 | [ 0.000000] 4 disabled |
| 37 | [ 0.000000] 5 disabled |
| 38 | [ 0.000000] 6 disabled |
| 39 | [ 0.000000] 7 disabled |
| 40 | [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| 41 | [ 0.000000] found SMP MP-table at [mem 0x000f5f20-0x000f5f2f] mapped at [ (ptrval)] |
| 42 | [ 0.000000] Scanning 1 areas for low memory corruption |
| 43 | [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 |
| 44 | [ 0.000000] Using GB pages for direct mapping |
| 45 | [ 0.000000] BRK [0x15f3f000, 0x15f3ffff] PGTABLE |
| 46 | [ 0.000000] BRK [0x15f40000, 0x15f40fff] PGTABLE |
| 47 | [ 0.000000] BRK [0x15f41000, 0x15f41fff] PGTABLE |
| 48 | [ 0.000000] BRK [0x15f42000, 0x15f42fff] PGTABLE |
| 49 | [ 0.000000] BRK [0x15f43000, 0x15f43fff] PGTABLE |
| 50 | [ 0.000000] BRK [0x15f44000, 0x15f44fff] PGTABLE |
| 51 | [ 0.000000] RAMDISK: [mem 0x31806000-0x34bfafff] |
| 52 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 53 | [ 0.000000] ACPI: RSDP 0x00000000000F60F0 000024 (v02 COREv4) |
| 54 | [ 0.000000] ACPI: XSDT 0x000000005FD310E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20191018) |
| 55 | [ 0.000000] ACPI: FACP 0x000000005FD32DD0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20191018) |
| 56 | [ 0.000000] ACPI: DSDT 0x000000005FD31280 001B43 (v02 COREv4 COREBOOT 00010001 INTL 20191018) |
| 57 | [ 0.000000] ACPI: FACS 0x000000005FD31240 000040 |
| 58 | [ 0.000000] ACPI: FACS 0x000000005FD31240 000040 |
| 59 | [ 0.000000] ACPI: SSDT 0x000000005FD32ED0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20191018) |
| 60 | [ 0.000000] ACPI: APIC 0x000000005FD32F60 00007E (v02 COREv4 COREBOOT 00000000 CORE 20191018) |
| 61 | [ 0.000000] ACPI: HEST 0x000000005FD32FE0 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20191018) |
| 62 | [ 0.000000] ACPI: SSDT 0x000000005FD331B0 0046D1 (v02 AMD AGESA 00000002 MSFT 04000000) |
| 63 | [ 0.000000] ACPI: SSDT 0x000000005FD37890 00096C (v01 AMD AGESA 00000001 AMD 00000001) |
| 64 | [ 0.000000] ACPI: VFCT 0x000000005FD38200 00EA69 (v01 COREv4 COREBOOT 00000000 CORE 20191018) |
| 65 | [ 0.000000] ACPI: HPET 0x000000005FD46C70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20191018) |
| 66 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 67 | [ 0.000000] No NUMA configuration found |
| 68 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fd2dfff] |
| 69 | [ 0.000000] NODE_DATA(0) allocated [mem 0x5fd03000-0x5fd2dfff] |
| 70 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 71 | [ 0.000000] Zone ranges: |
| 72 | [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| 73 | [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000005fd2dfff] |
| 74 | [ 0.000000] Normal empty |
| 75 | [ 0.000000] Device empty |
| 76 | [ 0.000000] Movable zone start for each node |
| 77 | [ 0.000000] Early memory node ranges |
| 78 | [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| 79 | [ 0.000000] node 0: [mem 0x0000000000100000-0x000000005fd2dfff] |
| 80 | [ 0.000000] Reserved but unavailable: 820 pages |
| 81 | [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000005fd2dfff] |
| 82 | [ 0.000000] On node 0 totalpages: 392396 |
| 83 | [ 0.000000] DMA zone: 64 pages used for memmap |
| 84 | [ 0.000000] DMA zone: 21 pages reserved |
| 85 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 86 | [ 0.000000] DMA32 zone: 6069 pages used for memmap |
| 87 | [ 0.000000] DMA32 zone: 388398 pages, LIFO batch:31 |
| 88 | [ 0.000000] ACPI: PM-Timer IO Port: 0x818 |
| 89 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 90 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| 91 | [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 |
| 92 | [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55 |
| 93 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 94 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| 95 | [ 0.000000] ACPI: IRQ0 used by override. |
| 96 | [ 0.000000] ACPI: IRQ9 used by override. |
| 97 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 98 | [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 |
| 99 | [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 100 | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| 101 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 102 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 103 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 104 | [ 0.000000] e820: [mem 0x80000000-0xf7ffffff] available for PCI devices |
| 105 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 106 | [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| 107 | [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0 |
| 108 | [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 |
| 109 | [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 |
| 110 | [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 |
| 111 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| 112 | [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 386242 |
| 113 | [ 0.000000] Policy zone: DMA32 |
| 114 | [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-45-generic root=UUID=ca091366-d83f-47c0-b37a-012f03cec05f ro quiet splash vt.handoff=7 |
| 115 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 116 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 117 | [ 0.000000] Memory: 1462808K/1569584K available (12300K kernel code, 2472K rwdata, 4260K rodata, 2408K init, 2416K bss, 106776K reserved, 0K cma-reserved) |
| 118 | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| 119 | [ 0.000000] ftrace: allocating 39200 entries in 154 pages |
| 120 | [ 0.000000] Hierarchical RCU implementation. |
| 121 | [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. |
| 122 | [ 0.000000] Tasks RCU enabled. |
| 123 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| 124 | [ 0.000000] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16 |
| 125 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 126 | [ 0.000000] vt handoff: transparent VT on vt#7 |
| 127 | [ 0.000000] Console: colour dummy device 80x25 |
| 128 | [ 0.000000] console [tty0] enabled |
| 129 | [ 0.000000] ACPI: Core revision 20170831 |
| 130 | [ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| 131 | [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| 132 | [ 0.000000] hpet clockevent registered |
| 133 | [ 0.000000] APIC: Switch to symmetric I/O mode setup |
| 134 | [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 135 | [ 0.020000] tsc: Fast TSC calibration using PIT |
| 136 | [ 0.024000] tsc: Detected 1297.600 MHz processor |
| 137 | [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2595.20 BogoMIPS (lpj=5190400) |
| 138 | [ 0.024000] pid_max: default: 32768 minimum: 301 |
| 139 | [ 0.024000] Security Framework initialized |
| 140 | [ 0.024000] Yama: becoming mindful. |
| 141 | [ 0.024000] AppArmor: AppArmor initialized |
| 142 | [ 0.024000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| 143 | [ 0.024000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| 144 | [ 0.024000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) |
| 145 | [ 0.024000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) |
| 146 | [ 0.024000] mce: CPU supports 6 MCE banks |
| 147 | [ 0.024000] LVT offset 1 assigned for vector 0xf9 |
| 148 | [ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| 149 | [ 0.024000] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 |
| 150 | [ 0.024000] Spectre V2 : Mitigation: Full AMD retpoline |
| 151 | [ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| 152 | [ 0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier |
| 153 | [ 0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| 154 | [ 0.024000] Freeing SMP alternatives memory: 36K |
| 155 | [ 0.032000] smpboot: CPU0: AMD Sempron(tm) 3850 APU with Radeon(tm) R3 (family: 0x16, model: 0x0, stepping: 0x1) |
| 156 | [ 0.032000] Performance Events: AMD PMU driver. |
| 157 | [ 0.032000] ... version: 0 |
| 158 | [ 0.032000] ... bit width: 48 |
| 159 | [ 0.032000] ... generic registers: 4 |
| 160 | [ 0.032000] ... value mask: 0000ffffffffffff |
| 161 | [ 0.032000] ... max period: 00007fffffffffff |
| 162 | [ 0.032000] ... fixed-purpose events: 0 |
| 163 | [ 0.032000] ... event mask: 000000000000000f |
| 164 | [ 0.032000] Hierarchical SRCU implementation. |
| 165 | [ 0.032000] smp: Bringing up secondary CPUs ... |
| 166 | [ 0.032000] x86: Booting SMP configuration: |
| 167 | [ 0.032000] .... node #0, CPUs: #1 |
| 168 | [ 0.004000] do_IRQ: 1.55 No irq handler for vector |
| 169 | [ 0.032086] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| 170 | [ 0.032335] #2 |
| 171 | [ 0.004000] do_IRQ: 2.55 No irq handler for vector |
| 172 | [ 0.034529] #3 |
| 173 | [ 0.004000] do_IRQ: 3.55 No irq handler for vector |
| 174 | [ 0.036136] smp: Brought up 1 node, 4 CPUs |
| 175 | [ 0.036136] smpboot: Max logical packages: 1 |
| 176 | [ 0.036136] smpboot: Total of 4 processors activated (10380.80 BogoMIPS) |
| 177 | [ 0.037380] devtmpfs: initialized |
| 178 | [ 0.037380] x86/mm: Memory block size: 128MB |
| 179 | [ 0.040543] evm: security.selinux |
| 180 | [ 0.040545] evm: security.SMACK64 |
| 181 | [ 0.040546] evm: security.SMACK64EXEC |
| 182 | [ 0.040548] evm: security.SMACK64TRANSMUTE |
| 183 | [ 0.040549] evm: security.SMACK64MMAP |
| 184 | [ 0.040550] evm: security.apparmor |
| 185 | [ 0.040551] evm: security.ima |
| 186 | [ 0.040553] evm: security.capability |
| 187 | [ 0.040590] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| 188 | [ 0.040590] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| 189 | [ 0.040590] pinctrl core: initialized pinctrl subsystem |
| 190 | [ 0.040590] RTC time: 16:04:47, date: 12/13/19 |
| 191 | [ 0.040630] NET: Registered protocol family 16 |
| 192 | [ 0.040868] audit: initializing netlink subsys (disabled) |
| 193 | [ 0.040883] audit: type=2000 audit(1576253087.040:1): state=initialized audit_enabled=0 res=1 |
| 194 | [ 0.040883] cpuidle: using governor ladder |
| 195 | [ 0.040883] cpuidle: using governor menu |
| 196 | [ 0.040883] ACPI: bus type PCI registered |
| 197 | [ 0.040883] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 198 | [ 0.040883] PCI: Using configuration type 1 for base access |
| 199 | [ 0.040883] PCI: Using configuration type 1 for extended access |
| 200 | [ 0.040883] mtrr: your CPUs had inconsistent variable MTRR settings |
| 201 | [ 0.040883] mtrr: probably your BIOS does not setup all CPUs. |
| 202 | [ 0.040883] mtrr: corrected configuration. |
| 203 | [ 0.044100] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages |
| 204 | [ 0.044100] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| 205 | [ 0.044220] ACPI: Added _OSI(Module Device) |
| 206 | [ 0.044222] ACPI: Added _OSI(Processor Device) |
| 207 | [ 0.044224] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 208 | [ 0.044226] ACPI: Added _OSI(Processor Aggregator Device) |
| 209 | [ 0.044229] ACPI: Added _OSI(Linux-Dell-Video) |
| 210 | [ 0.044232] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| 211 | [ 0.044234] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| 212 | [ 0.048017] ACPI: Executed 2 blocks of module-level executable AML code |
| 213 | [ 0.066206] ACPI: Interpreter enabled |
| 214 | [ 0.066265] ACPI: (supports S0 S1 S3 S4 S5) |
| 215 | [ 0.066267] ACPI: Using IOAPIC for interrupt routing |
| 216 | [ 0.066300] HEST: Table parsing has been initialized. |
| 217 | [ 0.066306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 218 | [ 0.066460] ACPI: Enabled 9 GPEs in block 00 to 1F |
| 219 | [ 0.079099] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 220 | [ 0.079114] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 221 | [ 0.079306] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 222 | [ 0.079505] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored |
| 223 | [ 0.080051] PCI host bridge to bus 0000:00 |
| 224 | [ 0.080057] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| 225 | [ 0.080061] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| 226 | [ 0.080065] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 227 | [ 0.080068] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] |
| 228 | [ 0.080072] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff] |
| 229 | [ 0.080077] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 230 | [ 0.080094] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 |
| 231 | [ 0.080371] pci 0000:00:01.0: [1002:9836] type 00 class 0x030000 |
| 232 | [ 0.080400] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] |
| 233 | [ 0.080414] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref] |
| 234 | [ 0.080425] pci 0000:00:01.0: reg 0x20: [io 0x2000-0x20ff] |
| 235 | [ 0.080435] pci 0000:00:01.0: reg 0x24: [mem 0xf0a00000-0xf0a3ffff] |
| 236 | [ 0.080445] pci 0000:00:01.0: reg 0x30: [mem 0xf0a40000-0xf0a5ffff pref] |
| 237 | [ 0.080453] pci 0000:00:01.0: enabling Extended Tags |
| 238 | [ 0.080511] pci 0000:00:01.0: supports D1 D2 |
| 239 | [ 0.080515] pci 0000:00:01.0: PME# supported from D1 D2 D3hot |
| 240 | [ 0.080740] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 |
| 241 | [ 0.080767] pci 0000:00:01.1: reg 0x10: [mem 0xf0a60000-0xf0a63fff 64bit] |
| 242 | [ 0.080803] pci 0000:00:01.1: enabling Extended Tags |
| 243 | [ 0.080856] pci 0000:00:01.1: supports D1 D2 |
| 244 | [ 0.081062] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 |
| 245 | [ 0.081309] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400 |
| 246 | [ 0.081358] pci 0000:00:02.2: enabling Extended Tags |
| 247 | [ 0.081418] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold |
| 248 | [ 0.081677] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 |
| 249 | [ 0.081701] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| 250 | [ 0.081712] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| 251 | [ 0.081723] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| 252 | [ 0.081734] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| 253 | [ 0.081745] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| 254 | [ 0.081757] pci 0000:00:11.0: reg 0x24: [mem 0xf0a6b000-0xf0a6b3ff] |
| 255 | [ 0.081807] pci 0000:00:11.0: PME# supported from D3hot |
| 256 | [ 0.082039] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 |
| 257 | [ 0.082063] pci 0000:00:12.0: reg 0x10: [mem 0xf0a68000-0xf0a68fff] |
| 258 | [ 0.082365] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 |
| 259 | [ 0.082390] pci 0000:00:12.2: reg 0x10: [mem 0xf0a6c000-0xf0a6c0ff] |
| 260 | [ 0.082482] pci 0000:00:12.2: supports D1 D2 |
| 261 | [ 0.082485] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold |
| 262 | [ 0.082721] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 |
| 263 | [ 0.082745] pci 0000:00:13.0: reg 0x10: [mem 0xf0a69000-0xf0a69fff] |
| 264 | [ 0.083046] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 |
| 265 | [ 0.083071] pci 0000:00:13.2: reg 0x10: [mem 0xf0a6d000-0xf0a6d0ff] |
| 266 | [ 0.083163] pci 0000:00:13.2: supports D1 D2 |
| 267 | [ 0.083167] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold |
| 268 | [ 0.083395] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 |
| 269 | [ 0.083675] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 |
| 270 | [ 0.083703] pci 0000:00:14.2: reg 0x10: [mem 0xf0a64000-0xf0a67fff 64bit] |
| 271 | [ 0.083784] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| 272 | [ 0.084008] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 |
| 273 | [ 0.084303] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310 |
| 274 | [ 0.084327] pci 0000:00:16.0: reg 0x10: [mem 0xf0a6a000-0xf0a6afff] |
| 275 | [ 0.084628] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320 |
| 276 | [ 0.084653] pci 0000:00:16.2: reg 0x10: [mem 0xf0a6e000-0xf0a6e0ff] |
| 277 | [ 0.084745] pci 0000:00:16.2: supports D1 D2 |
| 278 | [ 0.084749] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot D3cold |
| 279 | [ 0.084975] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 |
| 280 | [ 0.085201] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 |
| 281 | [ 0.085422] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 |
| 282 | [ 0.085646] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 |
| 283 | [ 0.085873] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 |
| 284 | [ 0.086095] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 |
| 285 | [ 0.086415] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 |
| 286 | [ 0.086451] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff] |
| 287 | [ 0.086482] pci 0000:01:00.0: reg 0x18: [mem 0xf0900000-0xf0900fff 64bit] |
| 288 | [ 0.086503] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref] |
| 289 | [ 0.086622] pci 0000:01:00.0: supports D1 D2 |
| 290 | [ 0.086625] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 291 | [ 0.096036] pci 0000:00:02.2: PCI bridge to [bus 01] |
| 292 | [ 0.096045] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff] |
| 293 | [ 0.096050] pci 0000:00:02.2: bridge window [mem 0xf0900000-0xf09fffff] |
| 294 | [ 0.096058] pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf08fffff 64bit pref] |
| 295 | [ 0.097198] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15) |
| 296 | [ 0.097404] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15) |
| 297 | [ 0.097608] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15) |
| 298 | [ 0.097812] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15) |
| 299 | [ 0.098014] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15) |
| 300 | [ 0.098216] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10 |
| 301 | [ 0.098415] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 302 | [ 0.098618] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 303 | [ 0.099571] SCSI subsystem initialized |
| 304 | [ 0.100046] libata version 3.00 loaded. |
| 305 | [ 0.100080] pci 0000:00:01.0: vgaarb: setting as boot VGA device |
| 306 | [ 0.100080] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| 307 | [ 0.100080] pci 0000:00:01.0: vgaarb: bridge control possible |
| 308 | [ 0.100080] vgaarb: loaded |
| 309 | [ 0.100086] ACPI: bus type USB registered |
| 310 | [ 0.100126] usbcore: registered new interface driver usbfs |
| 311 | [ 0.100148] usbcore: registered new interface driver hub |
| 312 | [ 0.100190] usbcore: registered new device driver usb |
| 313 | [ 0.100190] EDAC MC: Ver: 3.0.0 |
| 314 | [ 0.100190] PCI: Using ACPI for IRQ routing |
| 315 | [ 0.100190] PCI: pci_cache_line_size set to 64 bytes |
| 316 | [ 0.100190] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 317 | [ 0.100190] e820: reserve RAM buffer [mem 0x5fd2e000-0x5fffffff] |
| 318 | [ 0.100412] NetLabel: Initializing |
| 319 | [ 0.100415] NetLabel: domain hash size = 128 |
| 320 | [ 0.100416] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| 321 | [ 0.100456] NetLabel: unlabeled traffic allowed by default |
| 322 | [ 0.100498] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| 323 | [ 0.100498] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| 324 | [ 0.102221] clocksource: Switched to clocksource hpet |
| 325 | [ 0.132418] VFS: Disk quotas dquot_6.6.0 |
| 326 | [ 0.132460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 327 | [ 0.132728] AppArmor: AppArmor Filesystem Enabled |
| 328 | [ 0.132818] pnp: PnP ACPI init |
| 329 | [ 0.133578] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved |
| 330 | [ 0.133593] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 331 | [ 0.133677] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 332 | [ 0.133859] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 333 | [ 0.134006] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) |
| 334 | [ 0.134156] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) |
| 335 | [ 0.134307] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) |
| 336 | [ 0.134798] pnp: PnP ACPI: found 6 devices |
| 337 | [ 0.144558] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| 338 | [ 0.144593] pci 0000:00:02.2: PCI bridge to [bus 01] |
| 339 | [ 0.144598] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff] |
| 340 | [ 0.144606] pci 0000:00:02.2: bridge window [mem 0xf0900000-0xf09fffff] |
| 341 | [ 0.144612] pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf08fffff 64bit pref] |
| 342 | [ 0.144624] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| 343 | [ 0.144628] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| 344 | [ 0.144631] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 345 | [ 0.144635] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] |
| 346 | [ 0.144638] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff] |
| 347 | [ 0.144643] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| 348 | [ 0.144646] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff] |
| 349 | [ 0.144649] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref] |
| 350 | [ 0.144799] NET: Registered protocol family 2 |
| 351 | [ 0.145262] TCP established hash table entries: 16384 (order: 5, 131072 bytes) |
| 352 | [ 0.145360] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) |
| 353 | [ 0.145449] TCP: Hash tables configured (established 16384 bind 16384) |
| 354 | [ 0.145530] UDP hash table entries: 1024 (order: 3, 32768 bytes) |
| 355 | [ 0.145554] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) |
| 356 | [ 0.145652] NET: Registered protocol family 1 |
| 357 | [ 0.145681] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| 358 | [ 0.146396] pci 0000:00:12.2: PME# does not work under D3, disabling it |
| 359 | [ 0.146982] pci 0000:00:13.2: PME# does not work under D3, disabling it |
| 360 | [ 0.147581] pci 0000:00:16.2: PME# does not work under D3, disabling it |
| 361 | [ 0.147612] PCI: CLS 64 bytes, default 64 |
| 362 | [ 0.147718] Unpacking initramfs... |
| 363 | [ 2.164180] Freeing initrd memory: 53204K |
| 364 | [ 2.164345] amd_uncore: AMD NB counters detected |
| 365 | [ 2.164364] amd_uncore: AMD LLC counters detected |
| 366 | [ 2.164611] LVT offset 0 assigned for vector 0x400 |
| 367 | [ 2.164689] perf: AMD IBS detected (0x000000ff) |
| 368 | [ 2.164816] Scanning for low memory corruption every 60 seconds |
| 369 | [ 2.166499] Initialise system trusted keyrings |
| 370 | [ 2.166519] Key type blacklist registered |
| 371 | [ 2.166599] workingset: timestamp_bits=36 max_order=19 bucket_order=0 |
| 372 | [ 2.170170] zbud: loaded |
| 373 | [ 2.171299] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| 374 | [ 2.171679] fuse init (API version 7.26) |
| 375 | [ 2.174993] Key type asymmetric registered |
| 376 | [ 2.174996] Asymmetric key parser 'x509' registered |
| 377 | [ 2.175072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) |
| 378 | [ 2.175158] io scheduler noop registered |
| 379 | [ 2.175160] io scheduler deadline registered |
| 380 | [ 2.175234] io scheduler cfq registered (default) |
| 381 | [ 2.176029] pcieport 0000:00:02.2: Signaling PME with IRQ 25 |
| 382 | [ 2.176206] vesafb: mode is 1024x768x32, linelength=4096, pages=0 |
| 383 | [ 2.176207] vesafb: scrolling: redraw |
| 384 | [ 2.176211] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 |
| 385 | [ 2.176240] vesafb: framebuffer at 0xe0000000, mapped to 0x (ptrval), using 3072k, total 3072k |
| 386 | [ 2.176437] Console: switching to colour frame buffer device 128x48 |
| 387 | [ 2.176483] fb0: VESA VGA frame buffer device |
| 388 | [ 2.176685] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| 389 | [ 2.176741] ACPI: Power Button [PWRB] |
| 390 | [ 2.176856] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| 391 | [ 2.176895] ACPI: Power Button [PWRF] |
| 392 | [ 2.177889] GHES: Failed to enable APEI firmware first mode. |
| 393 | [ 2.178105] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled |
| 394 | [ 2.198606] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 395 | [ 2.204033] Linux agpgart interface v0.103 |
| 396 | [ 2.208433] loop: module loaded |
| 397 | [ 2.208935] libphy: Fixed MDIO Bus: probed |
| 398 | [ 2.208938] tun: Universal TUN/TAP device driver, 1.6 |
| 399 | [ 2.209030] PPP generic driver version 2.4.2 |
| 400 | [ 2.209141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 401 | [ 2.209148] ehci-pci: EHCI PCI platform driver |
| 402 | [ 2.209482] ehci-pci 0000:00:12.2: EHCI Host Controller |
| 403 | [ 2.209497] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| 404 | [ 2.209507] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 405 | [ 2.209520] ehci-pci 0000:00:12.2: debug port 1 |
| 406 | [ 2.209592] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0a6c000 |
| 407 | [ 2.224036] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| 408 | [ 2.224149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 409 | [ 2.224153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 410 | [ 2.224157] usb usb1: Product: EHCI Host Controller |
| 411 | [ 2.224160] usb usb1: Manufacturer: Linux 4.15.0-45-generic ehci_hcd |
| 412 | [ 2.224163] usb usb1: SerialNumber: 0000:00:12.2 |
| 413 | [ 2.224439] hub 1-0:1.0: USB hub found |
| 414 | [ 2.224458] hub 1-0:1.0: 4 ports detected |
| 415 | [ 2.224913] ehci-pci 0000:00:13.2: EHCI Host Controller |
| 416 | [ 2.224926] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| 417 | [ 2.224933] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 418 | [ 2.224945] ehci-pci 0000:00:13.2: debug port 1 |
| 419 | [ 2.224988] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0a6d000 |
| 420 | [ 2.240045] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| 421 | [ 2.240131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 422 | [ 2.240135] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 423 | [ 2.240139] usb usb2: Product: EHCI Host Controller |
| 424 | [ 2.240142] usb usb2: Manufacturer: Linux 4.15.0-45-generic ehci_hcd |
| 425 | [ 2.240145] usb usb2: SerialNumber: 0000:00:13.2 |
| 426 | [ 2.240376] hub 2-0:1.0: USB hub found |
| 427 | [ 2.240392] hub 2-0:1.0: 4 ports detected |
| 428 | [ 2.240828] ehci-pci 0000:00:16.2: EHCI Host Controller |
| 429 | [ 2.240840] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 |
| 430 | [ 2.240847] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 431 | [ 2.240859] ehci-pci 0000:00:16.2: debug port 1 |
| 432 | [ 2.240901] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0a6e000 |
| 433 | [ 2.256043] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 |
| 434 | [ 2.256134] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| 435 | [ 2.256138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 436 | [ 2.256141] usb usb3: Product: EHCI Host Controller |
| 437 | [ 2.256145] usb usb3: Manufacturer: Linux 4.15.0-45-generic ehci_hcd |
| 438 | [ 2.256148] usb usb3: SerialNumber: 0000:00:16.2 |
| 439 | [ 2.256384] hub 3-0:1.0: USB hub found |
| 440 | [ 2.256400] hub 3-0:1.0: 2 ports detected |
| 441 | [ 2.256633] ehci-platform: EHCI generic platform driver |
| 442 | [ 2.256657] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 443 | [ 2.256664] ohci-pci: OHCI PCI platform driver |
| 444 | [ 2.256849] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| 445 | [ 2.256861] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 |
| 446 | [ 2.256921] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0a68000 |
| 447 | [ 2.320101] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| 448 | [ 2.320105] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 449 | [ 2.320108] usb usb4: Product: OHCI PCI host controller |
| 450 | [ 2.320111] usb usb4: Manufacturer: Linux 4.15.0-45-generic ohci_hcd |
| 451 | [ 2.320114] usb usb4: SerialNumber: 0000:00:12.0 |
| 452 | [ 2.320341] hub 4-0:1.0: USB hub found |
| 453 | [ 2.320360] hub 4-0:1.0: 4 ports detected |
| 454 | [ 2.320785] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| 455 | [ 2.320801] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 |
| 456 | [ 2.320833] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0a69000 |
| 457 | [ 2.384107] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| 458 | [ 2.384111] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 459 | [ 2.384114] usb usb5: Product: OHCI PCI host controller |
| 460 | [ 2.384117] usb usb5: Manufacturer: Linux 4.15.0-45-generic ohci_hcd |
| 461 | [ 2.384120] usb usb5: SerialNumber: 0000:00:13.0 |
| 462 | [ 2.384347] hub 5-0:1.0: USB hub found |
| 463 | [ 2.384366] hub 5-0:1.0: 4 ports detected |
| 464 | [ 2.384798] ohci-pci 0000:00:16.0: OHCI PCI host controller |
| 465 | [ 2.384810] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6 |
| 466 | [ 2.384844] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0a6a000 |
| 467 | [ 2.448106] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 |
| 468 | [ 2.448110] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 469 | [ 2.448114] usb usb6: Product: OHCI PCI host controller |
| 470 | [ 2.448117] usb usb6: Manufacturer: Linux 4.15.0-45-generic ohci_hcd |
| 471 | [ 2.448120] usb usb6: SerialNumber: 0000:00:16.0 |
| 472 | [ 2.448350] hub 6-0:1.0: USB hub found |
| 473 | [ 2.448368] hub 6-0:1.0: 2 ports detected |
| 474 | [ 2.448601] ohci-platform: OHCI generic platform driver |
| 475 | [ 2.448619] uhci_hcd: USB Universal Host Controller Interface driver |
| 476 | [ 2.448780] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 477 | [ 2.449222] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 478 | [ 2.449233] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 479 | [ 2.449545] mousedev: PS/2 mouse device common for all mice |
| 480 | [ 2.449886] rtc_cmos 00:01: RTC can wake from S4 |
| 481 | [ 2.450047] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 |
| 482 | [ 2.450077] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs |
| 483 | [ 2.450096] i2c /dev entries driver |
| 484 | [ 2.450108] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 |
| 485 | [ 2.450276] device-mapper: uevent: version 1.0.3 |
| 486 | [ 2.450447] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com |
| 487 | [ 2.450561] ledtrig-cpu: registered to indicate activity on CPUs |
| 488 | [ 2.451478] NET: Registered protocol family 10 |
| 489 | [ 2.460755] Segment Routing with IPv6 |
| 490 | [ 2.460813] NET: Registered protocol family 17 |
| 491 | [ 2.460906] Key type dns_resolver registered |
| 492 | [ 2.461525] RAS: Correctable Errors collector initialized. |
| 493 | [ 2.461649] microcode: CPU0: patch_level=0x07000110 |
| 494 | [ 2.461664] microcode: CPU1: patch_level=0x07000110 |
| 495 | [ 2.461673] microcode: CPU2: patch_level=0x07000110 |
| 496 | [ 2.461689] microcode: CPU3: patch_level=0x07000110 |
| 497 | [ 2.461775] microcode: Microcode Update Driver: v2.2. |
| 498 | [ 2.461798] sched_clock: Marking stable (2461762667, 0)->(2548531502, -86768835) |
| 499 | [ 2.462270] registered taskstats version 1 |
| 500 | [ 2.462294] Loading compiled-in X.509 certificates |
| 501 | [ 2.468932] Loaded X.509 cert 'Build time autogenerated kernel key: 35696836150e8814a73ddf797b531767553bb0f7' |
| 502 | [ 2.468993] zswap: loaded using pool lzo/zbud |
| 503 | [ 2.477313] Key type big_key registered |
| 504 | [ 2.477324] Key type trusted registered |
| 505 | [ 2.481345] Key type encrypted registered |
| 506 | [ 2.481352] AppArmor: AppArmor sha1 policy hashing enabled |
| 507 | [ 2.481358] ima: No TPM chip found, activating TPM-bypass! (rc=-19) |
| 508 | [ 2.481369] ima: Allocated hash algorithm: sha1 |
| 509 | [ 2.481407] evm: HMAC attrs: 0x1 |
| 510 | [ 2.481889] Magic number: 15:224:85 |
| 511 | [ 2.482101] rtc_cmos 00:01: setting system clock to 2019-12-13 16:04:50 UTC (1576253090) |
| 512 | [ 2.482457] acpi_cpufreq: overriding BIOS provided _PSD data |
| 513 | [ 2.482933] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found |
| 514 | [ 2.482934] EDD information not available. |
| 515 | [ 2.489859] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 |
| 516 | [ 2.491226] Freeing unused kernel memory: 2408K |
| 517 | [ 2.520040] Write protecting the kernel read-only data: 20480k |
| 518 | [ 2.521547] Freeing unused kernel memory: 2008K |
| 519 | [ 2.535821] Freeing unused kernel memory: 1884K |
| 520 | [ 2.561600] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| 521 | [ 2.576039] usb 2-2: new high-speed USB device number 2 using ehci-pci |
| 522 | [ 2.587146] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| 523 | [ 2.587373] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| 524 | [ 2.587410] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| 525 | [ 2.727319] ahci 0000:00:11.0: version 3.0 |
| 526 | [ 2.727678] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode |
| 527 | [ 2.727685] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio deso sadm sds |
| 528 | [ 2.731522] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| 529 | [ 2.733057] r8169 0000:01:00.0 eth0: RTL8106e at 0x (ptrval), b8:97:5a:85:83:94, XID 04900000 IRQ 27 |
| 530 | [ 2.733512] scsi host0: ahci |
| 531 | [ 2.734109] scsi host1: ahci |
| 532 | [ 2.734235] ata1: SATA max UDMA/133 abar m1024@0xf0a6b000 port 0xf0a6b100 irq 19 |
| 533 | [ 2.734240] ata2: SATA max UDMA/133 abar m1024@0xf0a6b000 port 0xf0a6b180 irq 19 |
| 534 | [ 2.753465] usb 2-2: New USB device found, idVendor=148f, idProduct=3572 |
| 535 | [ 2.753472] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 536 | [ 2.753476] usb 2-2: Product: 802.11 n WLAN |
| 537 | [ 2.753479] usb 2-2: Manufacturer: Ralink |
| 538 | [ 2.753482] usb 2-2: SerialNumber: 1.0 |
| 539 | [ 2.804042] r8169 0000:01:00.0 enp1s0: renamed from eth0 |
| 540 | [ 2.863530] [drm] radeon kernel modesetting enabled. |
| 541 | [ 2.863610] checking generic (e0000000 300000) vs hw (e0000000 10000000) |
| 542 | [ 2.863612] fb: switching to radeondrmfb from VESA VGA |
| 543 | [ 2.863673] Console: switching to colour dummy device 80x25 |
| 544 | [ 2.864506] [drm] initializing kernel modesetting (KABINI 0x1002:0x9836 0x1002:0x9836 0x00). |
| 545 | [ 2.864534] [drm] doorbell mmio base: 0xF0000000 |
| 546 | [ 2.864536] [drm] doorbell mmio size: 8388608 |
| 547 | [ 2.864581] ATOM BIOS: AMD |
| 548 | [ 2.864659] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) |
| 549 | [ 2.864664] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF |
| 550 | [ 2.864671] [drm] Detected VRAM RAM=512M, BAR=256M |
| 551 | [ 2.864673] [drm] RAM width 128bits DDR |
| 552 | [ 2.864801] [TTM] Zone kernel: Available graphics memory: 761174 kiB |
| 553 | [ 2.864803] [TTM] Initializing pool allocator |
| 554 | [ 2.864814] [TTM] Initializing DMA pool allocator |
| 555 | [ 2.864861] [drm] radeon: 512M of VRAM memory ready |
| 556 | [ 2.864863] [drm] radeon: 2048M of GTT memory ready. |
| 557 | [ 2.864879] [drm] Loading kabini Microcode |
| 558 | [ 2.865132] [drm] Internal thermal controller without fan control |
| 559 | [ 2.866716] [drm] radeon: dpm initialized |
| 560 | [ 2.866894] [drm] Found UVD firmware Version: 1.55 Family ID: 9 |
| 561 | [ 2.870049] [drm] Found VCE firmware/feedback version 40.2.2 / 15! |
| 562 | [ 2.870070] [drm] GART: num cpu pages 524288, num gpu pages 524288 |
| 563 | [ 2.886388] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000). |
| 564 | [ 2.886644] radeon 0000:00:01.0: WB enabled |
| 565 | [ 2.886665] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x (ptrval) |
| 566 | [ 2.886670] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x (ptrval) |
| 567 | [ 2.886674] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x (ptrval) |
| 568 | [ 2.886678] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x (ptrval) |
| 569 | [ 2.886682] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x (ptrval) |
| 570 | [ 2.887564] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x00000000000782b0 and cpu addr 0x (ptrval) |
| 571 | [ 2.887903] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x (ptrval) |
| 572 | [ 2.887907] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x (ptrval) |
| 573 | [ 2.887912] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 574 | [ 2.887913] [drm] Driver supports precise vblank timestamp query. |
| 575 | [ 2.888005] radeon 0000:00:01.0: radeon: using MSI. |
| 576 | [ 2.888067] [drm] radeon: irq initialized. |
| 577 | [ 2.891184] [drm] ring test on 0 succeeded in 3 usecs |
| 578 | [ 2.891280] [drm] ring test on 1 succeeded in 3 usecs |
| 579 | [ 2.891309] [drm] ring test on 2 succeeded in 3 usecs |
| 580 | [ 2.891559] [drm] ring test on 3 succeeded in 4 usecs |
| 581 | [ 2.891568] [drm] ring test on 4 succeeded in 4 usecs |
| 582 | [ 2.937270] [drm] ring test on 5 succeeded in 1 usecs |
| 583 | [ 2.957137] [drm] UVD initialized successfully. |
| 584 | [ 3.054367] ata2: SATA link down (SStatus 0 SControl 300) |
| 585 | [ 3.066368] [drm] ring test on 6 succeeded in 16 usecs |
| 586 | [ 3.066380] [drm] ring test on 7 succeeded in 3 usecs |
| 587 | [ 3.066382] [drm] VCE initialized successfully. |
| 588 | [ 3.067469] [drm] ib test on ring 0 succeeded in 0 usecs |
| 589 | [ 3.168070] tsc: Refined TSC clocksource calibration: 1297.649 MHz |
| 590 | [ 3.168081] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x12b47125985, max_idle_ns: 440795238018 ns |
| 591 | [ 3.208075] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 592 | [ 3.208259] ata1.00: ATA-9: ADATA SP600, 2.4, max UDMA/100 |
| 593 | [ 3.208263] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| 594 | [ 3.208535] ata1.00: configured for UDMA/100 |
| 595 | [ 3.208930] scsi 0:0:0:0: Direct-Access ATA ADATA SP600 2.4 PQ: 0 ANSI: 5 |
| 596 | [ 3.209518] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 597 | [ 3.209749] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) |
| 598 | [ 3.209795] sd 0:0:0:0: [sda] Write Protect is off |
| 599 | [ 3.209800] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 600 | [ 3.209884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 601 | [ 3.211023] sda: sda1 sda2 < sda5 > |
| 602 | [ 3.211987] sd 0:0:0:0: [sda] Attached SCSI disk |
| 603 | [ 3.584106] [drm] ib test on ring 1 succeeded in 0 usecs |
| 604 | [ 4.096091] [drm] ib test on ring 2 succeeded in 0 usecs |
| 605 | [ 4.096160] [drm] ib test on ring 3 succeeded in 0 usecs |
| 606 | [ 4.096221] [drm] ib test on ring 4 succeeded in 0 usecs |
| 607 | [ 4.157092] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 |
| 608 | [ 4.192184] clocksource: Switched to clocksource tsc |
| 609 | [ 4.640087] [drm] ib test on ring 5 succeeded |
| 610 | [ 4.663674] [drm] ib test on ring 6 succeeded |
| 611 | [ 4.666493] [drm] ib test on ring 7 succeeded |
| 612 | [ 4.668011] [drm] Radeon Display Connectors |
| 613 | [ 4.668014] [drm] Connector 0: |
| 614 | [ 4.668015] [drm] HDMI-A-1 |
| 615 | [ 4.668016] [drm] HPD1 |
| 616 | [ 4.668021] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c |
| 617 | [ 4.668022] [drm] Encoders: |
| 618 | [ 4.668023] [drm] DFP1: INTERNAL_UNIPHY |
| 619 | [ 4.668025] [drm] Connector 1: |
| 620 | [ 4.668026] [drm] HDMI-A-2 |
| 621 | [ 4.668028] [drm] HPD2 |
| 622 | [ 4.668043] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c |
| 623 | [ 4.668044] [drm] Encoders: |
| 624 | [ 4.668046] [drm] DFP2: INTERNAL_UNIPHY |
| 625 | [ 4.668047] [drm] Connector 2: |
| 626 | [ 4.668049] [drm] VGA-1 |
| 627 | [ 4.668052] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc |
| 628 | [ 4.668053] [drm] Encoders: |
| 629 | [ 4.668055] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| 630 | [ 4.834129] [drm] fb mappable at 0xE0722000 |
| 631 | [ 4.834131] [drm] vram apper at 0xE0000000 |
| 632 | [ 4.834133] [drm] size 3145728 |
| 633 | [ 4.834134] [drm] fb depth is 24 |
| 634 | [ 4.834135] [drm] pitch is 4096 |
| 635 | [ 4.834251] fbcon: radeondrmfb (fb0) is primary device |
| 636 | [ 4.834399] Console: switching to colour frame buffer device 128x48 |
| 637 | [ 4.834449] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| 638 | [ 4.855645] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 |
| 639 | [ 4.956447] [drm] amdgpu kernel modesetting enabled. |
| 640 | [ 4.989516] random: fast init done |
| 641 | [ 5.046948] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| 642 | [ 5.220115] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) |
| 643 | [ 5.240338] systemd[1]: Detected architecture x86-64. |
| 644 | [ 5.240599] systemd[1]: Set hostname to <BiostarTest>. |
| 645 | [ 5.350731] systemd[1]: Created slice User and Session Slice. |
| 646 | [ 5.350916] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 647 | [ 5.351038] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 648 | [ 5.351440] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 649 | [ 5.351556] systemd[1]: Listening on Journal Socket (/dev/log). |
| 650 | [ 5.351630] systemd[1]: Listening on udev Kernel Socket. |
| 651 | [ 5.351738] systemd[1]: Listening on Journal Socket. |
| 652 | [ 5.375908] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| 653 | [ 5.409734] lp: driver loaded but no devices found |
| 654 | [ 5.418653] ppdev: user-space parallel port driver |
| 655 | [ 5.424092] parport_pc 00:05: reported by Plug and Play ACPI |
| 656 | [ 5.424181] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP] |
| 657 | [ 5.476803] systemd-journald[251]: Received request to flush runtime journal from PID 1 |
| 658 | [ 5.520247] lp0: using parport0 (interrupt-driven). |
| 659 | [ 5.967283] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| 660 | [ 5.967290] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection |
| 661 | [ 5.967927] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| 662 | [ 6.000512] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 663 | [ 6.169599] AVX version of gcm_enc/dec engaged. |
| 664 | [ 6.169603] AES CTR mode by8 optimization enabled |
| 665 | [ 6.371397] kvm: Nested Virtualization enabled |
| 666 | [ 6.371403] kvm: Nested Paging enabled |
| 667 | [ 6.377995] MCE: In-kernel MCE decoding enabled. |
| 668 | [ 6.397768] EDAC amd64: Node 0: DRAM ECC disabled. |
| 669 | [ 6.397773] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| 670 | Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| 671 | (Note that use of the override may cause unknown side effects.) |
| 672 | [ 6.425879] audit: type=1400 audit(1576253094.438:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=598 comm="apparmor_parser" |
| 673 | [ 6.425891] audit: type=1400 audit(1576253094.438:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser" |
| 674 | [ 6.425899] audit: type=1400 audit(1576253094.438:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=598 comm="apparmor_parser" |
| 675 | [ 6.425905] audit: type=1400 audit(1576253094.438:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser" |
| 676 | [ 6.426466] audit: type=1400 audit(1576253094.438:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=597 comm="apparmor_parser" |
| 677 | [ 6.426475] audit: type=1400 audit(1576253094.438:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=597 comm="apparmor_parser" |
| 678 | [ 6.439362] audit: type=1400 audit(1576253094.450:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=601 comm="apparmor_parser" |
| 679 | [ 6.439377] audit: type=1400 audit(1576253094.450:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=601 comm="apparmor_parser" |
| 680 | [ 6.439405] EDAC amd64: Node 0: DRAM ECC disabled. |
| 681 | [ 6.439409] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| 682 | Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| 683 | (Note that use of the override may cause unknown side effects.) |
| 684 | [ 6.440883] audit: type=1400 audit(1576253094.454:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=605 comm="apparmor_parser" |
| 685 | [ 6.443515] audit: type=1400 audit(1576253094.454:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=604 comm="apparmor_parser" |
| 686 | [ 6.448901] snd_hda_intel 0000:00:01.1: Force to non-snoop mode |
| 687 | [ 6.485682] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 |
| 688 | [ 6.485845] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6 |
| 689 | [ 6.492484] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line |
| 690 | [ 6.492496] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 691 | [ 6.492501] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| 692 | [ 6.492504] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 |
| 693 | [ 6.492507] snd_hda_codec_realtek hdaudioC1D2: inputs: |
| 694 | [ 6.492512] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 |
| 695 | [ 6.492516] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 |
| 696 | [ 6.492520] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a |
| 697 | [ 6.507989] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 |
| 698 | [ 6.508286] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 |
| 699 | [ 6.508444] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| 700 | [ 6.508600] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| 701 | [ 6.508752] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| 702 | [ 6.596422] Adding 998396k swap on /dev/sda5. Priority:-2 extents:1 across:998396k SSFS |
| 703 | [ 7.158885] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready |
| 704 | [ 7.372129] r8169 0000:01:00.0 enp1s0: link down |
| 705 | [ 7.372224] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready |
| 706 | [ 7.372558] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| 707 | [ 7.380074] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| 708 | [ 7.576067] usb 2-2: reset high-speed USB device number 2 using ehci-pci |
| 709 | [ 7.741190] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected |
| 710 | [ 7.769683] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0009 detected |
| 711 | [ 7.780870] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 712 | [ 7.781773] usbcore: registered new interface driver rt2800usb |
| 713 | [ 7.791211] rt2800usb 2-2:1.0 wlx000da318432a: renamed from wlan0 |
| 714 | [ 7.857702] IPv6: ADDRCONF(NETDEV_UP): wlx000da318432a: link is not ready |
| 715 | [ 7.857856] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' |
| 716 | [ 7.859884] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 |
| 717 | [ 8.177090] IPv6: ADDRCONF(NETDEV_UP): wlx000da318432a: link is not ready |
| 718 | [ 8.243583] IPv6: ADDRCONF(NETDEV_UP): wlx000da318432a: link is not ready |
| 719 | [ 19.285421] random: crng init done |
| 720 | [ 19.285428] random: 7 urandom warning(s) missed due to ratelimiting |
| 721 | [ 27.882509] wlx000da318432a: authenticate with 4c:5e:0c:69:99:61 |
| 722 | [ 27.950064] wlx000da318432a: send auth to 4c:5e:0c:69:99:61 (try 1/3) |
| 723 | [ 27.951767] wlx000da318432a: authenticated |
| 724 | [ 27.956070] wlx000da318432a: associate with 4c:5e:0c:69:99:61 (try 1/3) |
| 725 | [ 27.961397] wlx000da318432a: RX AssocResp from 4c:5e:0c:69:99:61 (capab=0x431 status=0 aid=3) |
| 726 | [ 27.969270] wlx000da318432a: associated |
| 727 | [ 28.031190] IPv6: ADDRCONF(NETDEV_CHANGE): wlx000da318432a: link becomes ready |