Gitiles
Code Review Sign In
review.coreboot.org / board-status / 3d05f27d10612e49fc9ebf498aff22cd0a788b97 / . / asus / kfsn4-dre / 4.5-1290-g0853055 / 2017-03-15T12_53_57Z / kernel_log.txt
blob: 34a1fbe976cc22dccc31b01dc86af9e86b51ca8c [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand3d05f272017-03-15 13:13:34 +0000[diff] [blame^]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 03/15/2017
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f0690-0x000f069f] mapped at [ffff8800000f0690]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F07F0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
63[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000E1E (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFAE830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFAE870 000072 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFAE8F0 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFAE9E0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFAEA10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFAEA50 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFAEB40 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
75[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
76[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
77[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
78[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
79[ 0.000000] NUMA: Initialized distance table, cnt=2
80[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
81[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
82[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
83[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
84[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
86[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
87[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
88[ 0.000000] Zone ranges:
89[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
90[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
91[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
92[ 0.000000] Movable zone start for each node
93[ 0.000000] Early memory node ranges
94[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
95[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
96[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
97[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
98[ 0.000000] On node 0 totalpages: 1048376
99[ 0.000000] DMA zone: 56 pages used for memmap
100[ 0.000000] DMA zone: 21 pages reserved
101[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
102[ 0.000000] DMA32 zone: 10695 pages used for memmap
103[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
104[ 0.000000] Normal zone: 3584 pages used for memmap
105[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
106[ 0.000000] On node 1 totalpages: 262144
107[ 0.000000] Normal zone: 3584 pages used for memmap
108[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
109[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
110[ 0.000000] ACPI: Local APIC address 0xfee00000
111[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
112[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
113[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
114[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
115[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
116[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
117[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
118[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
119[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
120[ 0.000000] ACPI: IRQ9 used by override.
121[ 0.000000] ACPI: IRQ14 used by override.
122[ 0.000000] ACPI: IRQ15 used by override.
123[ 0.000000] Using ACPI (MADT) for SMP configuration information
124[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
125[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
126[ 0.000000] nr_irqs_gsi: 40
127[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
129[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
130[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
131[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
132[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
133[ 0.000000] Booting paravirtualized kernel on bare hardware
134[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:2
135[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u2097152
136[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
137[ 0.000000] pcpu-alloc: [0] 0 [1] 1
138[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
139[ 0.000000] Policy zone: Normal
140[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
141[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
142[ 0.000000] AGP: Checking aperture...
143[ 0.000000] AGP: No AGP bridge found
144[ 0.000000] AGP: Node 0: aperture [bus addr 0xa5ea000000-0xa5ebffffff] (32MB)
145[ 0.000000] Aperture beyond 4GB. Ignoring.
146[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
147[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
148[ 0.000000] AGP: This costs you 64MB of RAM
149[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
150[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
151[ 0.000000] Memory: 5012856K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229224K reserved)
152[ 0.000000] Hierarchical RCU implementation.
153[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
154[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
155[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
156[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
157[ 0.000000] spurious 8259A interrupt: IRQ7.
158[ 0.000000] Console: colour *CGA 80x25
159[ 0.000000] console [ttyS0] enabled
160[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
161[ 0.000000] hpet clockevent registered
162[ 0.000000] tsc: Fast TSC calibration using PIT
163[ 0.000000] tsc: Detected 1909.739 MHz processor
164[ 0.000149] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.47 BogoMIPS (lpj=7638956)
165[ 0.010770] pid_max: default: 32768 minimum: 301
166[ 0.015406] ACPI: Core revision 20140424
167[ 0.021619] ACPI: All ACPI Tables successfully acquired
168[ 0.026942] Security Framework initialized
169[ 0.031053] AppArmor: AppArmor disabled by boot time parameter
170[ 0.036881] Yama: disabled by default; enable with sysctl kernel.yama.*
171[ 0.044319] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
172[ 0.057204] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
173[ 0.066915] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
174[ 0.073810] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
175[ 0.081619] Initializing cgroup subsys memory
176[ 0.085988] Initializing cgroup subsys devices
177[ 0.090442] Initializing cgroup subsys freezer
178[ 0.094887] Initializing cgroup subsys net_cls
179[ 0.099334] Initializing cgroup subsys blkio
180[ 0.103613] Initializing cgroup subsys perf_event
181[ 0.108316] Initializing cgroup subsys net_prio
182[ 0.112884] tseg: 0000000000
183[ 0.112895] CPU: Physical Processor ID: 0
184[ 0.116909] CPU: Processor Core ID: 0
185[ 0.120572] mce: CPU supports 6 MCE banks
186[ 0.124591] LVT offset 0 assigned for vector 0xf9
187[ 0.129303] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
188Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
189tlb_flushall_shift: 6
190[ 0.144634] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
191[ 0.153635] ftrace: allocating 21614 entries in 85 pages
192[ 0.168796] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
193[ 0.214297] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
194[ 0.328537] Performance Events: AMD PMU driver.
195[ 0.333088] ... version: 0
196[ 0.337090] ... bit width: 48
197[ 0.341179] ... generic registers: 4
198[ 0.345182] ... value mask: 0000ffffffffffff
199[ 0.350484] ... max period: 00007fffffffffff
200[ 0.355786] ... fixed-purpose events: 0
201[ 0.359789] ... event mask: 000000000000000f
202[ 0.367295] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
203[ 0.375553] x86: Booting SMP configuration:
204[ 0.379735] .... node #1, CPUs: #1
205[ 0.492530] x86: Booted up 2 nodes, 2 CPUs
206[ 0.496816] smpboot: Total of 2 processors activated (7639.06 BogoMIPS)
207[ 0.505259] devtmpfs: initialized
208[ 0.516394] pinctrl core: initialized pinctrl subsystem
209[ 0.521770] NET: Registered protocol family 16
210[ 0.526429] cpuidle: using governor ladder
211[ 0.530529] cpuidle: using governor menu
212[ 0.534457] node 0 link 1: io port [1000, 3fff]
213[ 0.534461] TOM: 00000000c0000000 aka 3072M
214[ 0.538644] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
215[ 0.538648] node 0 link 1: mmio [fc000000, fc3fffff]
216[ 0.538651] node 0 link 1: mmio [f8000000, fbffffff]
217[ 0.538654] TOM2: 0000000180000000 aka 6144M
218[ 0.542925] bus: [bus 00-05] on node 0 link 1
219[ 0.542927] bus: 00 [io 0x0000-0xffff]
220[ 0.542929] bus: 00 [mem 0xd0000000-0xffffffff]
221[ 0.542930] bus: 00 [mem 0x180000000-0xfcffffffff]
222[ 0.543013] ACPI: bus type PCI registered
223[ 0.547023] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
224[ 0.553605] PCI: Using configuration type 1 for base access
225[ 0.559167] PCI: Using configuration type 1 for extended access
226[ 0.577214] ACPI: Added _OSI(Module Device)
227[ 0.581403] ACPI: Added _OSI(Processor Device)
228[ 0.585843] ACPI: Added _OSI(3.0 _SCP Extensions)
229[ 0.590547] ACPI: Added _OSI(Processor Aggregator Device)
230[ 0.596917] ACPI: Executed 1 blocks of module-level executable AML code
231[ 0.605894] ACPI: Interpreter enabled
232[ 0.609566] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
233[ 0.618807] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
234[ 0.628042] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
235[ 0.637283] ACPI: (supports S0 S1 S5)
236[ 0.640944] ACPI: Using IOAPIC for interrupt routing
237[ 0.645951] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
238[ 0.670742] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
239[ 0.676923] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
240[ 0.685125] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
241[ 0.716065] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
242[ 0.726055] PCI host bridge to bus 0000:00
243[ 0.730153] pci_bus 0000:00: root bus resource [bus 00-05]
244[ 0.735639] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
245[ 0.741816] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
246[ 0.748687] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
247[ 0.755556] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
248[ 0.762426] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
249[ 0.768616] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
250[ 0.768775] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
251[ 0.768783] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
252[ 0.768898] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
253[ 0.768909] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
254[ 0.768921] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
255[ 0.768927] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
256[ 0.768944] pci 0000:00:01.1: PME# supported from D3hot D3cold
257[ 0.769045] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
258[ 0.769054] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
259[ 0.769081] pci 0000:00:02.0: supports D1 D2
260[ 0.769084] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
261[ 0.769128] pci 0000:00:02.0: System wakeup disabled by ACPI
262[ 0.774839] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
263[ 0.774849] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
264[ 0.774883] pci 0000:00:02.1: supports D1 D2
265[ 0.774885] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
266[ 0.774929] pci 0000:00:02.1: System wakeup disabled by ACPI
267[ 0.780650] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
268[ 0.780667] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
269[ 0.780678] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
270[ 0.787803] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
271[ 0.794326] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
272[ 0.801456] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
273[ 0.808076] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
274[ 0.808084] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
275[ 0.808089] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
276[ 0.808094] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
277[ 0.808098] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
278[ 0.808103] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
279[ 0.808108] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
280[ 0.808206] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
281[ 0.808216] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
282[ 0.808221] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
283[ 0.808226] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
284[ 0.808230] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
285[ 0.808235] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
286[ 0.808240] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
287[ 0.808339] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
288[ 0.808405] pci 0000:00:09.0: System wakeup disabled by ACPI
289[ 0.814124] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
290[ 0.814166] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.814211] pci 0000:00:0b.0: System wakeup disabled by ACPI
292[ 0.819930] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
293[ 0.819965] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
294[ 0.820011] pci 0000:00:0c.0: System wakeup disabled by ACPI
295[ 0.825724] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
296[ 0.825761] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.825808] pci 0000:00:0d.0: System wakeup disabled by ACPI
298[ 0.831518] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
299[ 0.831551] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
300[ 0.831597] pci 0000:00:0e.0: System wakeup disabled by ACPI
301[ 0.837320] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
302[ 0.837423] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
303[ 0.837520] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
304[ 0.837612] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
305[ 0.837709] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
306[ 0.837804] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
307[ 0.837908] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
308[ 0.837999] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
309[ 0.838097] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
310[ 0.838195] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
311[ 0.838347] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
312[ 0.838360] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
313[ 0.838370] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
314[ 0.838376] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
315[ 0.838417] pci 0000:01:04.0: supports D1 D2
316[ 0.838486] pci 0000:00:09.0: PCI bridge to [bus 01]
317[ 0.843451] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
318[ 0.843455] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
319[ 0.843458] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
320[ 0.843534] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
321[ 0.843552] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
322[ 0.843579] pci 0000:02:00.0: reg 0x30: [mem 0x69c00000-0x69c0ffff pref]
323[ 0.843642] pci 0000:02:00.0: PME# supported from D3hot D3cold
324[ 0.843720] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
325[ 0.853716] pci 0000:00:0b.0: PCI bridge to [bus 02]
326[ 0.858681] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
327[ 0.858758] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
328[ 0.858776] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
329[ 0.858862] pci 0000:03:00.0: PME# supported from D3hot D3cold
330[ 0.858938] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
331[ 0.868926] pci 0000:00:0c.0: PCI bridge to [bus 03]
332[ 0.873887] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
333[ 0.873948] pci 0000:00:0d.0: PCI bridge to [bus 04]
334[ 0.878966] pci 0000:00:0e.0: PCI bridge to [bus 05]
335[ 0.883943] pci_bus 0000:00: on NUMA node 0
336[ 0.884044] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
337[ 0.890151] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
338[ 0.896266] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
339[ 0.903531] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
340[ 0.910803] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
341[ 0.918088] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
342[ 0.925354] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
343[ 0.931447] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
344[ 0.937558] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
345[ 0.944823] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
346[ 0.952095] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
347[ 0.959355] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
348[ 0.965447] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
349[ 0.971564] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
350[ 0.978827] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
351[ 0.986113] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
352[ 0.993387] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
353[ 1.001892] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
354[ 1.008337] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
355[ 1.014774] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
356[ 1.021209] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
357[ 1.027957] ACPI: Enabled 1 GPEs in block 00 to 1F
358[ 1.033014] vgaarb: setting as boot device: PCI:0000:01:04.0
359[ 1.038675] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
360[ 1.046764] vgaarb: loaded
361[ 1.049471] vgaarb: bridge control possible 0000:01:04.0
362[ 1.054930] PCI: Using ACPI for IRQ routing
363[ 1.059117] PCI: pci_cache_line_size set to 64 bytes
364[ 1.059173] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
365[ 1.059177] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
366[ 1.059471] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
367[ 1.066515] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
368[ 1.071552] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
369[ 1.079584] Switched to clocksource hpet
370[ 1.095074] pnp: PnP ACPI init
371[ 1.098176] ACPI: bus type PNP registered
372[ 1.102683] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
373[ 1.102770] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
374[ 1.102850] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
375[ 1.102922] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
376[ 1.102958] pnp 00:04: [dma 2]
377[ 1.102992] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
378[ 1.103023] pnp: PnP ACPI: found 5 devices
379[ 1.107123] ACPI: bus type PNP unregistered
380[ 1.118283] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69c00000-0x69c0ffff pref]: no compatible bridge window
381[ 1.128225] pci 0000:00:09.0: PCI bridge to [bus 01]
382[ 1.133192] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
383[ 1.139283] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
384[ 1.146066] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
385[ 1.153289] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
386[ 1.160516] pci 0000:00:0b.0: PCI bridge to [bus 02]
387[ 1.165482] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
388[ 1.172266] pci 0000:00:0c.0: PCI bridge to [bus 03]
389[ 1.177230] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
390[ 1.184013] pci 0000:00:0d.0: PCI bridge to [bus 04]
391[ 1.188979] pci 0000:00:0e.0: PCI bridge to [bus 05]
392[ 1.193944] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
393[ 1.193947] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
394[ 1.193949] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
395[ 1.193952] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
396[ 1.193954] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
397[ 1.193957] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
398[ 1.193960] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
399[ 1.193962] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
400[ 1.193965] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
401[ 1.193968] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
402[ 1.194050] NET: Registered protocol family 2
403[ 1.198793] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
404[ 1.206435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
405[ 1.213764] TCP: Hash tables configured (established 65536 bind 65536)
406[ 1.220363] TCP: reno registered
407[ 1.223611] UDP hash table entries: 4096 (order: 5, 131072 bytes)
408[ 1.229822] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
409[ 1.236560] NET: Registered protocol family 1
410[ 1.241291] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
411[ 1.247357] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
412[ 1.253250] pci 0000:00:00.0: Found enabled HT MSI Mapping
413[ 1.258772] pci 0000:00:00.0: Found enabled HT MSI Mapping
414[ 1.264260] pci 0000:00:0b.0: Found disabled HT MSI Mapping
415[ 1.269841] pci 0000:00:00.0: Found enabled HT MSI Mapping
416[ 1.275364] pci 0000:00:00.0: Found enabled HT MSI Mapping
417[ 1.280848] pci 0000:00:0c.0: Found disabled HT MSI Mapping
418[ 1.286421] pci 0000:00:00.0: Found enabled HT MSI Mapping
419[ 1.291958] pci 0000:00:00.0: Found enabled HT MSI Mapping
420[ 1.297449] pci 0000:00:0d.0: Found disabled HT MSI Mapping
421[ 1.303020] pci 0000:00:00.0: Found enabled HT MSI Mapping
422[ 1.308546] pci 0000:00:00.0: Found enabled HT MSI Mapping
423[ 1.314030] pci 0000:00:0e.0: Found disabled HT MSI Mapping
424[ 1.319605] pci 0000:00:00.0: Found enabled HT MSI Mapping
425[ 1.325120] pci 0000:01:04.0: Video device with shadowed ROM
426[ 1.325129] PCI: CLS 64 bytes, default 64
427[ 1.325229] Unpacking initramfs...
428[ 1.703206] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
429[ 1.711073] PCI-DMA: Disabling AGP.
430[ 1.714721] PCI-DMA: aperture base @ b4000000 size 65536 KB
431[ 1.720299] PCI-DMA: using GART IOMMU.
432[ 1.724060] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
433[ 1.735893] platform rtc_cmos: registered platform RTC device (no PNP device found)
434[ 1.743710] microcode: CPU0: patch_level=0x01000084
435[ 1.748601] microcode: CPU1: patch_level=0x01000084
436[ 1.753597] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
437[ 1.762389] LVT offset 1 assigned for vector 0x400
438[ 1.767191] IBS: LVT offset 1 assigned
439[ 1.770963] perf: AMD IBS detected (0x00000007)
440[ 1.775962] futex hash table entries: 512 (order: 3, 32768 bytes)
441[ 1.782117] audit: initializing netlink subsys (disabled)
442[ 1.787545] audit: type=2000 audit(1489583383.528:1): initialized
443[ 1.794379] HugeTLB registered 2 MB page size, pre-allocated 0 pages
444[ 1.800779] zbud: loaded
445[ 1.803570] VFS: Disk quotas dquot_6.5.2
446[ 1.807523] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
447[ 1.814046] msgmni has been set to 9946
448[ 1.818390] alg: No test for stdrng (krng)
449[ 1.822545] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
450[ 1.830014] io scheduler noop registered
451[ 1.833948] io scheduler deadline registered
452[ 1.838271] io scheduler cfq registered (default)
453[ 1.843173] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
454[ 1.843298] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
455[ 1.843421] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
456[ 1.843527] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
457[ 1.843682] aer 0000:00:0b.0:pcie02: service driver aer loaded
458[ 1.843705] aer 0000:00:0c.0:pcie02: service driver aer loaded
459[ 1.843733] aer 0000:00:0d.0:pcie02: service driver aer loaded
460[ 1.843756] aer 0000:00:0e.0:pcie02: service driver aer loaded
461[ 1.843778] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
462[ 1.850743] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
463[ 1.857269] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
464[ 1.857281] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
465[ 1.864246] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
466[ 1.870772] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
467[ 1.870785] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
468[ 1.877738] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
469[ 1.877748] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
470[ 1.884703] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
471[ 1.884735] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
472[ 1.890336] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
473[ 1.897043] GHES: HEST is not enabled!
474[ 1.900933] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
475[ 1.927508] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
476[ 1.955152] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
477[ 1.963011] Linux agpgart interface v0.103
478[ 1.967267] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
479[ 1.977417] serio: i8042 KBD port at 0x60,0x64 irq 1
480[ 1.982384] serio: i8042 AUX port at 0x60,0x64 irq 12
481[ 1.987623] mousedev: PS/2 mouse device common for all mice
482[ 1.993300] rtc_cmos rtc_cmos: RTC can wake from S4
483[ 1.998353] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
484[ 2.004747] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
485[ 2.012609] ledtrig-cpu: registered to indicate activity on CPUs
486[ 2.018790] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
487[ 2.025232] AMD IOMMUv2 functionality not available on this system
488[ 2.031563] TCP: cubic registered
489[ 2.034956] NET: Registered protocol family 10
490[ 2.039791] mip6: Mobile IPv6
491[ 2.042763] NET: Registered protocol family 17
492[ 2.047229] mpls_gso: MPLS GSO support
493[ 2.047294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
494[ 2.060055] registered taskstats version 1
495[ 2.064935] rtc_cmos rtc_cmos: setting system clock to 2017-03-15 13:09:44 UTC (1489583384)
496[ 2.073350] PM: Hibernation image not present or could not be loaded.
497[ 2.075280] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
498[ 2.083112] Write protecting the kernel read-only data: 8192k
499[ 2.092301] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
500[ 2.100861] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
501[ 2.133003] systemd-udevd[63]: starting version 215
502[ 2.138713] random: systemd-udevd urandom read with 3 bits of entropy available
503[ 2.178606] ACPI: bus type USB registered
504[ 2.178707] SCSI subsystem initialized
505[ 2.188758] usbcore: registered new interface driver usbfs
506[ 2.196076] pps_core: LinuxPPS API ver. 1 registered
507[ 2.196925] FDC 0 is a post-1991 82077
508[ 2.197012] libata version 3.00 loaded.
509[ 2.204901] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
510[ 2.214707] sata_nv 0000:00:07.0: version 3.5
511[ 2.215048] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
512[ 2.223514] PTP clock support registered
513[ 2.227666] usbcore: registered new interface driver hub
514[ 2.234143] tg3.c:v3.137 (May 11, 2014)
515[ 2.238007] tg3 0000:02:00.0: enabling device (0004 -> 0006)
516[ 2.244437] usbcore: registered new device driver usb
517[ 2.250529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
518[ 2.257101] scsi0 : sata_nv
519[ 2.260495] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
520[ 2.267048] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
521[ 2.273677] ehci-pci: EHCI PCI platform driver
522[ 2.278398] scsi1 : sata_nv
523[ 2.281475] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
524[ 2.288611] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
525[ 2.296056] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
526[ 2.302217] scsi2 : sata_nv
527[ 2.305139] scsi3 : sata_nv
528[ 2.305836] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
529[ 2.305840] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
530[ 2.305842] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
531[ 2.305844] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
532[ 2.342423] tg3 0000:03:00.0: enabling device (0004 -> 0006)
533[ 2.348209] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
534[ 2.351396] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
535[ 2.351401] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
536[ 2.369422] pata_amd 0000:00:06.0: version 0.4.1
537[ 2.370187] scsi4 : pata_amd
538[ 2.373354] scsi5 : pata_amd
539[ 2.376307] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
540[ 2.383263] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
541[ 2.390463] ehci-pci 0000:00:02.1: EHCI Host Controller
542[ 2.396301] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
543[ 2.403862] ehci-pci 0000:00:02.1: debug port 1
544[ 2.408454] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
545[ 2.408476] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
546[ 2.421522] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
547[ 2.427142] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
548[ 2.427228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
549[ 2.427230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
550[ 2.427231] usb usb1: Product: EHCI Host Controller
551[ 2.427233] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
552[ 2.427234] usb usb1: SerialNumber: 0000:00:02.1
553[ 2.427583] hub 1-0:1.0: USB hub found
554[ 2.427593] hub 1-0:1.0: 10 ports detected
555[ 2.474908] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
556[ 2.484659] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
557[ 2.492505] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
558[ 2.503035] ohci-pci: OHCI PCI platform driver
559[ 2.507748] ohci-pci 0000:00:02.0: OHCI PCI host controller
560[ 2.513352] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
561[ 2.520792] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
562[ 2.581117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
563[ 2.587903] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
564[ 2.595116] usb usb2: Product: OHCI PCI host controller
565[ 2.600339] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
566[ 2.603077] ata1: SATA link down (SStatus 0 SControl 300)
567[ 2.611823] usb usb2: SerialNumber: 0000:00:02.0
568[ 2.616668] hub 2-0:1.0: USB hub found
569[ 2.620431] hub 2-0:1.0: 10 ports detected
570[ 2.683049] ata3: SATA link down (SStatus 0 SControl 300)
571[ 2.735024] tsc: Refined TSC clocksource calibration: 1909.786 MHz
572[ 2.926957] ata2: SATA link down (SStatus 0 SControl 300)
573[ 3.242846] ata4: SATA link down (SStatus 0 SControl 300)
574[ 3.428313] FS-Cache: Loaded
575[ 3.435838] RPC: Registered named UNIX socket transport module.
576[ 3.443074] RPC: Registered udp transport module.
577[ 3.449159] RPC: Registered tcp transport module.
578[ 3.455236] RPC: Registered tcp NFSv4.1 backchannel transport module.
579[ 3.468407] FS-Cache: Netfs 'nfs' registered for caching
580[ 3.480971] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
581[ 3.526858] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
582[ 3.738752] Switched to clocksource tsc
583[ 6.307348] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
584[ 6.313956] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
585[ 6.320825] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
586[ 6.668646] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
587[ 6.682177] systemd[1]: Detected architecture 'x86-64'.
588[ 6.725897] systemd[1]: Inserted module 'autofs4'
589[ 6.731773] systemd[1]: Set hostname to <cb-test-tgt>.
590[ 6.883788] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
591[ 6.896565] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
592[ 6.911963] systemd[1]: Expecting device dev-ttyS0.device...
593[ 6.925630] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
594[ 6.933349] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
595[ 6.940937] systemd[1]: Starting Remote File Systems (Pre).
596[ 6.957591] systemd[1]: Reached target Remote File Systems (Pre).
597[ 6.963702] systemd[1]: Starting Encrypted Volumes.
598[ 6.977592] systemd[1]: Reached target Encrypted Volumes.
599[ 6.983030] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
600[ 7.005576] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
601[ 7.014981] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
602[ 7.023024] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
603[ 7.030948] systemd[1]: Starting Paths.
604[ 7.045562] systemd[1]: Reached target Paths.
605[ 7.049943] systemd[1]: Starting Swap.
606[ 7.061551] systemd[1]: Reached target Swap.
607[ 7.065835] systemd[1]: Starting Root Slice.
608[ 7.077701] systemd[1]: Created slice Root Slice.
609[ 7.082424] systemd[1]: Starting User and Session Slice.
610[ 7.097543] systemd[1]: Created slice User and Session Slice.
611[ 7.103312] systemd[1]: Starting Delayed Shutdown Socket.
612[ 7.117534] systemd[1]: Listening on Delayed Shutdown Socket.
613[ 7.123296] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
614[ 7.141530] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
615[ 7.148505] systemd[1]: Starting Journal Socket (/dev/log).
616[ 7.165519] systemd[1]: Listening on Journal Socket (/dev/log).
617[ 7.171465] systemd[1]: Starting udev Kernel Socket.
618[ 7.185511] systemd[1]: Listening on udev Kernel Socket.
619[ 7.190846] systemd[1]: Starting udev Control Socket.
620[ 7.205504] systemd[1]: Listening on udev Control Socket.
621[ 7.210924] systemd[1]: Starting Journal Socket.
622[ 7.225502] systemd[1]: Listening on Journal Socket.
623[ 7.230492] systemd[1]: Starting System Slice.
624[ 7.245491] systemd[1]: Created slice System Slice.
625[ 7.250389] systemd[1]: Starting system-getty.slice.
626[ 7.265490] systemd[1]: Created slice system-getty.slice.
627[ 7.270954] systemd[1]: Starting system-serial\x2dgetty.slice.
628[ 7.285481] systemd[1]: Created slice system-serial\x2dgetty.slice.
629[ 7.291783] systemd[1]: Starting Increase datagram queue length...
630[ 7.310252] systemd[1]: Starting udev Coldplug all Devices...
631[ 7.345510] systemd[1]: Starting Load Kernel Modules...
632[ 7.364536] systemd[1]: Started Set Up Additional Binary Formats.
633[ 7.370998] systemd[1]: Mounting Debug File System...
634[ 7.390551] systemd[1]: Starting Create list of required static device nodes for the current kernel...
635[ 7.414439] systemd[1]: Mounting POSIX Message Queue File System...
636[ 7.430239] systemd[1]: Mounting Huge Pages File System...
637[ 7.446209] systemd[1]: Starting Slices.
638[ 7.457496] systemd[1]: Reached target Slices.
639[ 7.462017] systemd[1]: Starting Remount Root and Kernel File Systems...
640[ 7.489496] systemd[1]: Mounted Huge Pages File System.
641[ 7.505410] systemd[1]: Mounted POSIX Message Queue File System.
642[ 7.521410] systemd[1]: Mounted Debug File System.
643[ 7.537480] systemd[1]: Started Increase datagram queue length.
644[ 7.553515] systemd[1]: Started Load Kernel Modules.
645[ 7.573514] systemd[1]: Started Create list of required static device nodes for the current kernel.
646[ 7.593438] systemd[1]: Started Remount Root and Kernel File Systems.
647[ 7.609406] systemd[1]: Started udev Coldplug all Devices.
648[ 7.656085] systemd[1]: Started Various fixups to make systemd work better on Debian.
649[ 7.663954] systemd[1]: Starting Load/Save Random Seed...
650[ 7.678383] systemd[1]: Starting Create Static Device Nodes in /dev...
651[ 7.694187] systemd[1]: Starting Apply Kernel Variables...
652[ 7.710262] systemd[1]: Mounted Configuration File System.
653[ 7.715902] systemd[1]: Mounted FUSE Control File System.
654[ 7.721379] systemd[1]: Starting Syslog Socket.
655[ 7.733361] systemd[1]: Listening on Syslog Socket.
656[ 7.738317] systemd[1]: Starting Sockets.
657[ 7.749352] systemd[1]: Reached target Sockets.
658[ 7.753977] systemd[1]: Starting Journal Service...
659[ 7.777389] systemd[1]: Started Journal Service.
660[ 7.848081] systemd-udevd[161]: starting version 215
661[ 7.929506] systemd-journald[160]: Received request to flush runtime journal from PID 1
662[ 7.998603] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
663[ 8.014657] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
664[ 8.023818] acpi-cpufreq: overriding BIOS provided _PSD data
665[ 8.025374] ACPI: Power Button [PWRB]
666[ 8.025495] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
667[ 8.025497] ACPI: Power Button [PWRF]
668[ 8.044581] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
669[ 8.050744] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
670[ 8.093584] EDAC MC: Ver: 3.0.0
671[ 8.098350] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
672[ 8.110045] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
673[ 8.121507] MCE: In-kernel MCE decoding enabled.
674[ 8.135565] AMD64 EDAC driver v3.4.0
675[ 8.139910] input: PC Speaker as /devices/platform/pcspkr/input/input4
676[ 8.149243] EDAC amd64: DRAM ECC enabled.
677[ 8.157163] EDAC amd64: F10h detected (node 0).
678[ 8.161738] EDAC MC: DCT0 chip selects:
679[ 8.161741] EDAC amd64: MC: 0: 0MB 1: 0MB
680[ 8.166449] EDAC amd64: MC: 2: 0MB 3: 0MB
681[ 8.171185] EDAC amd64: MC: 4: 0MB 5: 0MB
682[ 8.175892] EDAC amd64: MC: 6: 2048MB 7: 2048MB
683[ 8.180647] EDAC MC: DCT1 chip selects:
684[ 8.180666] EDAC amd64: MC: 0: 0MB 1: 0MB
685[ 8.185374] EDAC amd64: MC: 2: 0MB 3: 0MB
686[ 8.190118] EDAC amd64: MC: 4: 0MB 5: 0MB
687[ 8.194829] EDAC amd64: MC: 6: 1024MB 7: 1024MB
688[ 8.199724] EDAC amd64: using x4 syndromes.
689[ 8.204884] EDAC amd64: CS6: Registered DDR2 RAM
690[ 8.209515] EDAC amd64: CS7: Registered DDR2 RAM
691[ 8.217041] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
692[ 8.229144] EDAC amd64: DRAM ECC enabled.
693[ 8.235942] EDAC amd64: F10h detected (node 1).
694[ 8.236186] kvm: Nested Virtualization enabled
695[ 8.236189] kvm: Nested Paging enabled
696[ 8.248718] EDAC MC: DCT0 chip selects:
697[ 8.248720] EDAC amd64: MC: 0: 1024MB 1: 0MB
698[ 8.253440] EDAC amd64: MC: 2: 0MB 3: 0MB
699[ 8.258144] EDAC amd64: MC: 4: 0MB 5: 0MB
700[ 8.262887] EDAC amd64: MC: 6: 0MB 7: 0MB
701[ 8.267630] EDAC MC: DCT1 chip selects:
702[ 8.267632] EDAC amd64: MC: 0: 0MB 1: 0MB
703[ 8.272350] EDAC amd64: MC: 2: 0MB 3: 0MB
704[ 8.277062] EDAC amd64: MC: 4: 0MB 5: 0MB
705[ 8.277064] EDAC amd64: MC: 6: 0MB 7: 0MB
706[ 8.277069] EDAC amd64: using x4 syndromes.
707[ 8.277071] EDAC amd64: MCT channel count: 1
708[ 8.296944] EDAC amd64: CS0: Registered DDR2 RAM
709[ 8.302460] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
710[ 8.313484] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
711[ 8.426012] random: nonblocking pool is initialized
712[ 38.572495] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****