Gitiles
Code Review Sign In
review.coreboot.org / board-status / 3cfbc14295e52f41924764755a8d91b90817b8e1 / . / lenovo / t430s / 4.6-1272-gd533b16669 / 2017-08-30T10_32_00Z / kernel_log.txt
blob: 02d66a18920f83f8550c4db274e30a6936699e93 [file] [log] [blame]
persmule78e3c872017-08-31 00:22:27 +0800[diff] [blame]1[ 0.000000] Linux version 4.12.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3) ) #1 SMP Debian 4.12.6-1 (2017-08-12)
2[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
3[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
6[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
7[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
8[ 0.000000] e820: BIOS-provided physical RAM map:
9[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
10[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fefcfff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000007fefd000-0x000000007fffffff] type 16
14[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008e9fffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: LENOVO 23539LU/23539LU, BIOS CBET4000 4.6-1272-gd533b16669 08/30/2017
22[ 0.000000] tsc: Fast TSC calibration using PIT
23[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
24[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
25[ 0.000000] e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: write-back
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 080000000 mask FC0000000 uncachable
33[ 0.000000] 1 base 0C0000000 mask FE0000000 uncachable
34[ 0.000000] 2 base 0E0000000 mask FF0000000 write-combining
35[ 0.000000] 3 base 0F0000000 mask FF0000000 uncachable
36[ 0.000000] 4 disabled
37[ 0.000000] 5 disabled
38[ 0.000000] 6 disabled
39[ 0.000000] 7 disabled
40[ 0.000000] 8 disabled
41[ 0.000000] 9 disabled
42[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
43[ 0.000000] e820: last_pfn = 0x7fefd max_arch_pfn = 0x400000000
44[ 0.000000] Base memory trampoline at [ffff8d4840099000] 99000 size 24576
45[ 0.000000] BRK [0x5bf54000, 0x5bf54fff] PGTABLE
46[ 0.000000] BRK [0x5bf55000, 0x5bf55fff] PGTABLE
47[ 0.000000] BRK [0x5bf56000, 0x5bf56fff] PGTABLE
48[ 0.000000] BRK [0x5bf57000, 0x5bf57fff] PGTABLE
49[ 0.000000] BRK [0x5bf58000, 0x5bf58fff] PGTABLE
50[ 0.000000] BRK [0x5bf59000, 0x5bf59fff] PGTABLE
51[ 0.000000] BRK [0x5bf5a000, 0x5bf5afff] PGTABLE
52[ 0.000000] BRK [0x5bf5b000, 0x5bf5bfff] PGTABLE
53[ 0.000000] BRK [0x5bf5c000, 0x5bf5cfff] PGTABLE
54[ 0.000000] BRK [0x5bf5d000, 0x5bf5dfff] PGTABLE
55[ 0.000000] RAMDISK: [mem 0x35723000-0x36b88fff]
56[ 0.000000] ACPI: Early table checksum verification disabled
57[ 0.000000] ACPI: RSDP 0x00000000000F2030 000024 (v02 CORE )
58[ 0.000000] ACPI: XSDT 0x000000007FF0F0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
59[ 0.000000] ACPI: FACP 0x000000007FF127E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: DSDT 0x000000007FF0F280 00355B (v02 COREv4 COREBOOT 20110725 INTL 20161222)
61[ 0.000000] ACPI: FACS 0x000000007FF0F240 000040
62[ 0.000000] ACPI: FACS 0x000000007FF0F240 000040
63[ 0.000000] ACPI: SSDT 0x000000007FF128E0 0018AD (v02 CORE COREBOOT 0000002A CORE 0000002A)
64[ 0.000000] ACPI: MCFG 0x000000007FF14190 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: TCPA 0x000000007FF141D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x000000007FF14210 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: DMAR 0x000000007FF14280 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: HPET 0x000000007FF16330 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: Local APIC address 0xfee00000
70[ 0.000000] No NUMA configuration found
71[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
72[ 0.000000] NODE_DATA(0) allocated [mem 0x26f5f9000-0x26f5fdfff]
73[ 0.000000] Zone ranges:
74[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
75[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
76[ 0.000000] Normal [mem 0x0000000100000000-0x000000026f5fffff]
77[ 0.000000] Device empty
78[ 0.000000] Movable zone start for each node
79[ 0.000000] Early memory node ranges
80[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
81[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fefcfff]
82[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026f5fffff]
83[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f5fffff]
84[ 0.000000] On node 0 totalpages: 2028700
85[ 0.000000] DMA zone: 64 pages used for memmap
86[ 0.000000] DMA zone: 22 pages reserved
87[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
88[ 0.000000] DMA32 zone: 8124 pages used for memmap
89[ 0.000000] DMA32 zone: 519933 pages, LIFO batch:31
90[ 0.000000] Normal zone: 23512 pages used for memmap
91[ 0.000000] Normal zone: 1504768 pages, LIFO batch:31
92[ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x000000008e9fffff
93[ 0.000000] ACPI: PM-Timer IO Port: 0x508
94[ 0.000000] ACPI: Local APIC address 0xfee00000
95[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
96[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
97[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
98[ 0.000000] ACPI: IRQ0 used by override.
99[ 0.000000] ACPI: IRQ9 used by override.
100[ 0.000000] Using ACPI (MADT) for SMP configuration information
101[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
102[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
103[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
104[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
105[ 0.000000] PM: Registered nosave memory: [mem 0x7fefd000-0x7fffffff]
106[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8e9fffff]
107[ 0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xf7ffffff]
108[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
109[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
110[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
111[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
112[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
113[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
114[ 0.000000] e820: [mem 0x8ea00000-0xf7ffffff] available for PCI devices
115[ 0.000000] Booting paravirtualized kernel on bare hardware
116[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
117[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
118[ 0.000000] percpu: Embedded 38 pages/cpu @ffff8d4aaf200000 s114776 r8192 d32680 u524288
119[ 0.000000] pcpu-alloc: s114776 r8192 d32680 u524288 alloc=1*2097152
120[ 0.000000] pcpu-alloc: [0] 0 1 2 3
121[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1996978
122[ 0.000000] Policy zone: Normal
123[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
124[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
125[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
126[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
127[ 0.000000] Memory: 7884460K/8114800K available (6481K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 230340K reserved, 0K cma-reserved)
128[ 0.000000] ftrace: allocating 28155 entries in 110 pages
129[ 0.000000] Hierarchical RCU implementation.
130[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
131[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
132[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
133[ 0.000000] Console: colour dummy device 80x25
134[ 0.000000] console [tty0] enabled
135[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
136[ 0.000000] hpet clockevent registered
137[ 0.000000] tsc: Fast TSC calibration using PIT
138[ 0.004000] tsc: Detected 2593.987 MHz processor
139[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.97 BogoMIPS (lpj=10375948)
140[ 0.004000] pid_max: default: 32768 minimum: 301
141[ 0.004000] ACPI: Core revision 20170303
142[ 0.009251] ACPI: 2 ACPI AML tables successfully acquired and loaded
143[ 0.009291] Security Framework initialized
144[ 0.009292] Yama: disabled by default; enable with sysctl kernel.yama.*
145[ 0.009297] AppArmor: AppArmor disabled by boot time parameter
146[ 0.009640] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
147[ 0.011529] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
148[ 0.012409] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
149[ 0.012415] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
150[ 0.012652] CPU: Physical Processor ID: 0
151[ 0.012653] CPU: Processor Core ID: 0
152[ 0.012660] mce: CPU supports 7 MCE banks
153[ 0.012667] CPU0: Thermal monitoring enabled (TM1)
154[ 0.012676] process: using mwait in idle threads
155[ 0.012678] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
156[ 0.012679] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
157[ 0.012787] Freeing SMP alternatives memory: 24K
158[ 0.013973] smpboot: Max logical packages: 2
159[ 0.013978] DMAR: Host address width 36
160[ 0.013979] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
161[ 0.013987] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
162[ 0.013988] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
163[ 0.013990] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
164[ 0.013992] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
165[ 0.013993] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
166[ 0.013994] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
167[ 0.014346] DMAR-IR: Enabled IRQ remapping in x2apic mode
168[ 0.014347] x2apic enabled
169[ 0.014352] Switched APIC routing to cluster x2apic.
170[ 0.014803] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
171[ 0.054503] TSC deadline timer enabled
172[ 0.054506] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
173[ 0.054580] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
174[ 0.054600] ... version: 3
175[ 0.054601] ... bit width: 48
176[ 0.054601] ... generic registers: 4
177[ 0.054602] ... value mask: 0000ffffffffffff
178[ 0.054602] ... max period: 00007fffffffffff
179[ 0.054602] ... fixed-purpose events: 3
180[ 0.054603] ... event mask: 000000070000000f
181[ 0.055075] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
182[ 0.055090] smp: Bringing up secondary CPUs ...
183[ 0.055173] x86: Booting SMP configuration:
184[ 0.055174] .... node #0, CPUs: #1 #2 #3
185[ 0.294020] smp: Brought up 1 node, 4 CPUs
186[ 0.294020] smpboot: Total of 4 processors activated (20755.64 BogoMIPS)
187[ 0.296112] sched_clock: Marking stable (296000000, 0)->(292347266, 3652734)
188[ 0.296382] devtmpfs: initialized
189[ 0.296432] x86/mm: Memory block size: 128MB
190[ 0.299006] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
191[ 0.299013] futex hash table entries: 1024 (order: 4, 65536 bytes)
192[ 0.299059] pinctrl core: initialized pinctrl subsystem
193[ 0.299153] NET: Registered protocol family 16
194[ 0.299315] cpuidle: using governor ladder
195[ 0.299345] cpuidle: using governor menu
196[ 0.299347] PCCT header not found.
197[ 0.299370] ACPI: bus type PCI registered
198[ 0.299371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
199[ 0.299421] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
200[ 0.299423] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
201[ 0.299430] PCI: Using configuration type 1 for base access
202[ 0.299464] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
203[ 0.300261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
204[ 0.300439] ACPI: Added _OSI(Module Device)
205[ 0.300440] ACPI: Added _OSI(Processor Device)
206[ 0.300440] ACPI: Added _OSI(3.0 _SCP Extensions)
207[ 0.300441] ACPI: Added _OSI(Processor Aggregator Device)
208[ 0.300556] ACPI: Executed 1 blocks of module-level executable AML code
209[ 0.302500] ACPI : EC: EC started
210[ 0.302501] ACPI : EC: interrupt blocked
211[ 0.302543] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
212[ 0.302545] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
213[ 0.302546] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
214[ 0.302546] ACPI: Interpreter enabled
215[ 0.302562] ACPI: (supports S0 S3 S4 S5)
216[ 0.302563] ACPI: Using IOAPIC for interrupt routing
217[ 0.302580] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
218[ 0.306655] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
219[ 0.306659] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
220[ 0.306704] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
221[ 0.306712] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
222[ 0.306757] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
223[ 0.306889] PCI host bridge to bus 0000:00
224[ 0.306891] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
225[ 0.306892] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
226[ 0.306893] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
227[ 0.306894] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
228[ 0.306895] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
229[ 0.306897] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
230[ 0.306898] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
231[ 0.306899] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
232[ 0.306900] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
233[ 0.306901] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
234[ 0.306902] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
235[ 0.306903] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
236[ 0.306904] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
237[ 0.306906] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
238[ 0.306907] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
239[ 0.306908] pci_bus 0000:00: root bus resource [mem 0x8ea00001-0xf7ffffff window]
240[ 0.306909] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
241[ 0.306910] pci_bus 0000:00: root bus resource [bus 00-ff]
242[ 0.306916] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
243[ 0.306993] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
244[ 0.307021] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
245[ 0.307077] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
246[ 0.307086] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
247[ 0.307091] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
248[ 0.307095] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
249[ 0.307161] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
250[ 0.307169] pci 0000:00:04.0: reg 0x10: [mem 0xf1930000-0xf1937fff 64bit]
251[ 0.307254] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
252[ 0.307274] pci 0000:00:14.0: reg 0x10: [mem 0xf1920000-0xf192ffff 64bit]
253[ 0.307341] pci 0000:00:14.0: PME# supported from D3hot D3cold
254[ 0.307374] pci 0000:00:14.0: System wakeup disabled by ACPI
255[ 0.307408] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
256[ 0.307423] pci 0000:00:19.0: reg 0x10: [mem 0xf1900000-0xf191ffff]
257[ 0.307432] pci 0000:00:19.0: reg 0x14: [mem 0xf193c000-0xf193cfff]
258[ 0.307440] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
259[ 0.307498] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
260[ 0.307556] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
261[ 0.307573] pci 0000:00:1a.0: reg 0x10: [mem 0xf193e000-0xf193e3ff]
262[ 0.307655] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
263[ 0.307688] pci 0000:00:1a.0: System wakeup disabled by ACPI
264[ 0.307720] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
265[ 0.307737] pci 0000:00:1b.0: reg 0x10: [mem 0xf1938000-0xf193bfff 64bit]
266[ 0.307808] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
267[ 0.307846] pci 0000:00:1b.0: System wakeup disabled by ACPI
268[ 0.307882] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
269[ 0.308009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
270[ 0.308096] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
271[ 0.308224] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
272[ 0.308304] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
273[ 0.308321] pci 0000:00:1d.0: reg 0x10: [mem 0xf193f000-0xf193f3ff]
274[ 0.308403] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
275[ 0.308437] pci 0000:00:1d.0: System wakeup disabled by ACPI
276[ 0.308467] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
277[ 0.308621] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
278[ 0.308637] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
279[ 0.308645] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
280[ 0.308653] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
281[ 0.308661] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
282[ 0.308669] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
283[ 0.308677] pci 0000:00:1f.2: reg 0x24: [mem 0xf193d000-0xf193d7ff]
284[ 0.308721] pci 0000:00:1f.2: PME# supported from D3hot
285[ 0.308776] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
286[ 0.308791] pci 0000:00:1f.3: reg 0x10: [mem 0xf1940000-0xf19400ff 64bit]
287[ 0.308811] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
288[ 0.308900] pci 0000:00:01.0: PCI bridge to [bus 01]
289[ 0.308988] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
290[ 0.309040] pci 0000:02:00.0: reg 0x10: [mem 0xf1800000-0xf181ffff 64bit]
291[ 0.309128] pci 0000:02:00.0: reg 0x30: [mem 0xf1820000-0xf182ffff pref]
292[ 0.309250] pci 0000:02:00.0: supports D1
293[ 0.309250] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
294[ 0.321358] pci 0000:00:1c.0: PCI bridge to [bus 02]
295[ 0.321365] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf18fffff]
296[ 0.321497] pci 0000:03:00.0: [1180:e823] type 00 class 0x080500
297[ 0.321535] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
298[ 0.321572] pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf08000ff]
299[ 0.321881] pci 0000:03:00.0: supports D1 D2
300[ 0.321882] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
301[ 0.333586] pci 0000:00:1c.1: PCI bridge to [bus 03]
302[ 0.333590] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
303[ 0.333593] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf08fffff]
304[ 0.333602] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
305[ 0.333710] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
306[ 0.333754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
307[ 0.333796] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
308[ 0.333839] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
309[ 0.333879] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
310[ 0.333921] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
311[ 0.333961] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
312[ 0.334002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
313[ 0.334547] ACPI: Enabled 1 GPEs in block 00 to 3F
314[ 0.334632] ACPI : EC: interrupt unblocked
315[ 0.334638] ACPI : EC: event unblocked
316[ 0.334644] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
317[ 0.334645] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
318[ 0.334716] pci 0000:00:02.0: vgaarb: setting as boot VGA device
319[ 0.334717] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
320[ 0.334720] pci 0000:00:02.0: vgaarb: bridge control possible
321[ 0.334720] vgaarb: loaded
322[ 0.334757] EDAC MC: Ver: 3.0.0
323[ 0.335060] PCI: Using ACPI for IRQ routing
324[ 0.336532] PCI: pci_cache_line_size set to 64 bytes
325[ 0.336667] e820: reserve RAM buffer [mem 0x7fefd000-0x7fffffff]
326[ 0.336669] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
327[ 0.336802] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
328[ 0.336806] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
329[ 0.339832] clocksource: Switched to clocksource hpet
330[ 0.347744] VFS: Disk quotas dquot_6.6.0
331[ 0.347765] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
332[ 0.347850] pnp: PnP ACPI init
333[ 0.347941] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
334[ 0.347942] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
335[ 0.347943] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
336[ 0.347945] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
337[ 0.347946] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
338[ 0.347947] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
339[ 0.347948] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
340[ 0.347950] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
341[ 0.347951] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
342[ 0.347952] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
343[ 0.347955] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
344[ 0.348393] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
345[ 0.348395] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
346[ 0.348428] system 00:02: [io 0x0500-0x057f] has been reserved
347[ 0.348429] system 00:02: [io 0x0480-0x04bf] has been reserved
348[ 0.348431] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
349[ 0.348449] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
350[ 0.348477] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
351[ 0.348500] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
352[ 0.348525] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
353[ 0.348541] pnp: PnP ACPI: found 7 devices
354[ 0.354689] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
355[ 0.354723] pci 0000:00:01.0: PCI bridge to [bus 01]
356[ 0.354728] pci 0000:00:1c.0: PCI bridge to [bus 02]
357[ 0.354735] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf18fffff]
358[ 0.354746] pci 0000:00:1c.1: PCI bridge to [bus 03]
359[ 0.354749] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
360[ 0.354755] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf08fffff]
361[ 0.354759] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
362[ 0.354769] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
363[ 0.354770] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
364[ 0.354771] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
365[ 0.354772] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
366[ 0.354773] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
367[ 0.354774] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
368[ 0.354775] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
369[ 0.354776] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
370[ 0.354777] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
371[ 0.354778] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
372[ 0.354779] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
373[ 0.354780] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
374[ 0.354781] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
375[ 0.354782] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
376[ 0.354783] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
377[ 0.354784] pci_bus 0000:00: resource 19 [mem 0x8ea00001-0xf7ffffff window]
378[ 0.354785] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
379[ 0.354786] pci_bus 0000:02: resource 1 [mem 0xf1800000-0xf18fffff]
380[ 0.354788] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
381[ 0.354788] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf08fffff]
382[ 0.354789] pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
383[ 0.354855] NET: Registered protocol family 2
384[ 0.354996] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
385[ 0.355118] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
386[ 0.355293] TCP: Hash tables configured (established 65536 bind 65536)
387[ 0.355324] UDP hash table entries: 4096 (order: 5, 131072 bytes)
388[ 0.355351] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
389[ 0.355405] NET: Registered protocol family 1
390[ 0.355419] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
391[ 0.356043] PCI: CLS 64 bytes, default 64
392[ 0.356081] Unpacking initramfs...
393[ 0.689010] Freeing initrd memory: 20888K
394[ 0.689122] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
395[ 0.689125] software IO TLB [mem 0x7befd000-0x7fefd000] (64MB) mapped at [ffff8d48bbefd000-ffff8d48bfefcfff]
396[ 0.689447] audit: initializing netlink subsys (disabled)
397[ 0.689503] audit: type=2000 audit(1504099977.685:1): state=initialized audit_enabled=0 res=1
398[ 0.689784] workingset: timestamp_bits=40 max_order=21 bucket_order=0
399[ 0.689822] zbud: loaded
400[ 1.009923] Key type asymmetric registered
401[ 1.009924] Asymmetric key parser 'x509' registered
402[ 1.009935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
403[ 1.009961] io scheduler noop registered
404[ 1.009962] io scheduler deadline registered
405[ 1.009970] io scheduler cfq registered (default)
406[ 1.009971] io scheduler mq-deadline registered
407[ 1.010635] pcieport 0000:00:01.0: Signaling PME with IRQ 26
408[ 1.010654] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
409[ 1.010673] pcieport 0000:00:1c.1: Signaling PME with IRQ 28
410[ 1.010694] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
411[ 1.010732] efifb: probing for efifb
412[ 1.010744] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
413[ 1.010744] efifb: mode is 1600x900x32, linelength=6400, pages=1
414[ 1.010745] efifb: scrolling: redraw
415[ 1.010746] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
416[ 1.013683] Console: switching to colour frame buffer device 200x56
417[ 1.016509] fb0: EFI VGA frame buffer device
418[ 1.016516] intel_idle: MWAIT substates: 0x21120
419[ 1.016517] intel_idle: v0.4.1 model 0x3A
420[ 1.016648] intel_idle: lapic_timer_reliable_states 0xffffffff
421[ 1.016941] GHES: HEST is not enabled!
422[ 1.016986] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
423[ 1.017303] Linux agpgart interface v0.103
424[ 1.031945] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
425[ 1.112348] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
426[ 1.112349] AMD IOMMUv2 functionality not available on this system
427[ 1.112842] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
428[ 1.114530] serio: i8042 KBD port at 0x60,0x64 irq 1
429[ 1.114535] serio: i8042 AUX port at 0x60,0x64 irq 12
430[ 1.114717] mousedev: PS/2 mouse device common for all mice
431[ 1.114752] rtc_cmos 00:03: RTC can wake from S4
432[ 1.114961] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
433[ 1.114993] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
434[ 1.115002] intel_pstate: Intel P-state driver initializing
435[ 1.115291] ledtrig-cpu: registered to indicate activity on CPUs
436[ 1.115587] NET: Registered protocol family 10
437[ 1.115990] Segment Routing with IPv6
438[ 1.116014] mip6: Mobile IPv6
439[ 1.116017] NET: Registered protocol family 17
440[ 1.116020] mpls_gso: MPLS GSO support
441[ 1.116439] microcode: sig=0x306a9, pf=0x10, revision=0x1b
442[ 1.116537] microcode: Microcode Update Driver: v2.2.
443[ 1.116636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
444[ 1.116759] registered taskstats version 1
445[ 1.116788] zswap: loaded using pool lzo/zbud
446[ 1.276514] rtc_cmos 00:03: setting system clock to 2017-08-30 13:32:58 UTC (1504099978)
447[ 1.276560] PM: Hibernation image not present or could not be loaded.
448[ 1.279289] Freeing unused kernel memory: 1468K
449[ 1.279291] Write protecting the kernel read-only data: 12288k
450[ 1.280100] Freeing unused kernel memory: 1696K
451[ 1.285207] Freeing unused kernel memory: 1188K
452[ 1.288063] x86/mm: Checked W+X mappings: passed, no W+X pages found.
453[ 1.372308] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
454[ 1.372444] pps_core: LinuxPPS API ver. 1 registered
455[ 1.372445] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
456[ 1.372519] thermal LNXTHERM:00: registered as thermal_zone0
457[ 1.372520] ACPI: Thermal Zone [THM0] (51 C)
458[ 1.372648] PTP clock support registered
459[ 1.373201] thermal LNXTHERM:01: registered as thermal_zone1
460[ 1.373202] ACPI: Thermal Zone [THM1] (27 C)
461[ 1.373456] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
462[ 1.373457] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
463[ 1.373531] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
464[ 1.373616] ACPI: bus type USB registered
465[ 1.373631] usbcore: registered new interface driver usbfs
466[ 1.373637] usbcore: registered new interface driver hub
467[ 1.373650] usbcore: registered new device driver usb
468[ 1.375326] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
469[ 1.375490] ehci-pci: EHCI PCI platform driver
470[ 1.376795] sdhci: Secure Digital Host Controller Interface driver
471[ 1.376796] sdhci: Copyright(c) Pierre Ossman
472[ 1.377010] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e823] (rev 4)
473[ 1.377452] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
474[ 1.377569] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
475[ 1.380063] SCSI subsystem initialized
476[ 1.381333] libata version 3.00 loaded.
477[ 1.387405] AVX version of gcm_enc/dec engaged.
478[ 1.387406] AES CTR mode by8 optimization enabled
479[ 1.517795] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
480[ 1.642596] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:84:1e:a5
481[ 1.642597] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
482[ 1.642649] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
483[ 1.642876] xhci_hcd 0000:00:14.0: xHCI Host Controller
484[ 1.642883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
485[ 1.643976] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
486[ 1.643982] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
487[ 1.644560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
488[ 1.644563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
489[ 1.644565] usb usb1: Product: xHCI Host Controller
490[ 1.644566] usb usb1: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
491[ 1.644568] usb usb1: SerialNumber: 0000:00:14.0
492[ 1.644935] hub 1-0:1.0: USB hub found
493[ 1.644967] hub 1-0:1.0: 4 ports detected
494[ 1.645372] xhci_hcd 0000:00:14.0: xHCI Host Controller
495[ 1.645377] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
496[ 1.645782] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
497[ 1.645785] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
498[ 1.645787] usb usb2: Product: xHCI Host Controller
499[ 1.645789] usb usb2: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
500[ 1.645790] usb usb2: SerialNumber: 0000:00:14.0
501[ 1.646108] hub 2-0:1.0: USB hub found
502[ 1.646122] hub 2-0:1.0: 4 ports detected
503[ 1.646435] ehci-pci 0000:00:1a.0: EHCI Host Controller
504[ 1.646440] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
505[ 1.646453] ehci-pci 0000:00:1a.0: debug port 2
506[ 1.650370] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
507[ 1.650391] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf193e000
508[ 1.663957] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
509[ 1.664013] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
510[ 1.664016] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
511[ 1.664017] usb usb3: Product: EHCI Host Controller
512[ 1.664019] usb usb3: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
513[ 1.664020] usb usb3: SerialNumber: 0000:00:1a.0
514[ 1.664314] hub 3-0:1.0: USB hub found
515[ 1.664322] hub 3-0:1.0: 3 ports detected
516[ 1.664621] ehci-pci 0000:00:1d.0: EHCI Host Controller
517[ 1.664627] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
518[ 1.664641] ehci-pci 0000:00:1d.0: debug port 2
519[ 1.668557] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
520[ 1.668576] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf193f000
521[ 1.683971] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
522[ 1.684038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
523[ 1.684040] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
524[ 1.684042] usb usb4: Product: EHCI Host Controller
525[ 1.684044] usb usb4: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
526[ 1.684045] usb usb4: SerialNumber: 0000:00:1d.0
527[ 1.684361] hub 4-0:1.0: USB hub found
528[ 1.684371] hub 4-0:1.0: 3 ports detected
529[ 1.684939] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
530[ 1.685953] ahci 0000:00:1f.2: version 3.0
531[ 1.686272] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
532[ 1.696407] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
533[ 1.696412] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
534[ 1.697988] scsi host0: ahci
535[ 1.698298] scsi host1: ahci
536[ 1.698505] scsi host2: ahci
537[ 1.698698] scsi host3: ahci
538[ 1.698848] scsi host4: ahci
539[ 1.699053] scsi host5: ahci
540[ 1.699184] ata1: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d100 irq 31
541[ 1.699189] ata2: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d180 irq 31
542[ 1.699195] ata3: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d200 irq 31
543[ 1.699196] ata4: DUMMY
544[ 1.699199] ata5: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d300 irq 31
545[ 1.699200] ata6: DUMMY
546[ 1.699925] tsc: Refined TSC clocksource calibration: 2594.111 MHz
547[ 1.699936] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2564811980e, max_idle_ns: 440795290434 ns
548[ 1.971955] usb 1-4: new high-speed USB device number 2 using xhci_hcd
549[ 1.991943] usb 3-1: new high-speed USB device number 2 using ehci-pci
550[ 2.011948] usb 4-1: new high-speed USB device number 2 using ehci-pci
551[ 2.014663] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
552[ 2.016979] ata1.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
553[ 2.016982] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
554[ 2.017405] ata1.00: configured for UDMA/133
555[ 2.017824] scsi 0:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
556[ 2.082402] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
557[ 2.132096] usb 1-4: New USB device found, idVendor=1e0e, idProduct=9001
558[ 2.132100] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
559[ 2.132102] usb 1-4: Product: Android
560[ 2.132104] usb 1-4: Manufacturer: Android
561[ 2.132105] usb 1-4: SerialNumber: Mdm9x25
562[ 2.140341] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
563[ 2.140346] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
564[ 2.140722] usb-storage 1-4:1.7: USB Mass Storage device detected
565[ 2.140789] hub 3-1:1.0: USB hub found
566[ 2.140837] hub 3-1:1.0: 6 ports detected
567[ 2.140981] scsi host6: usb-storage 1-4:1.7
568[ 2.141167] usbcore: registered new interface driver usb-storage
569[ 2.141878] usbcore: registered new interface driver uas
570[ 2.143799] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
571[ 2.143807] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
572[ 2.160403] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
573[ 2.160407] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
574[ 2.160951] hub 4-1:1.0: USB hub found
575[ 2.161132] hub 4-1:1.0: 8 ports detected
576[ 2.182991] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
577[ 2.220481] random: fast init done
578[ 2.366683] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
579[ 2.367443] ata2.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
580[ 2.367446] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
581[ 2.368205] ata2.00: configured for UDMA/133
582[ 2.368644] scsi 1:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
583[ 2.427976] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
584[ 2.447980] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
585[ 2.537306] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020
586[ 2.537310] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
587[ 2.537312] usb 3-1.3: Product: Biometric Coprocessor
588[ 2.537314] usb 3-1.3: Manufacturer: Auth
589[ 2.556416] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a
590[ 2.556419] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
591[ 2.556840] hub 4-1.5:1.0: USB hub found
592[ 2.557014] hub 4-1.5:1.0: 6 ports detected
593[ 2.615982] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
594[ 2.722692] ata3: SATA link down (SStatus 0 SControl 300)
595[ 2.724088] clocksource: Switched to clocksource tsc
596[ 2.728520] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
597[ 2.728524] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
598[ 2.728526] usb 3-1.4: Product: Broadcom Bluetooth Device
599[ 2.728528] usb 3-1.4: Manufacturer: Broadcom Corp
600[ 2.728530] usb 3-1.4: SerialNumber: 7CE9D3B7FC24
601[ 2.807983] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
602[ 2.824470] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
603[ 2.923797] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5
604[ 2.923801] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
605[ 2.923803] usb 3-1.6: Product: Integrated Camera
606[ 2.923805] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
607[ 3.023286] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
608[ 3.038526] ata5: SATA link down (SStatus 0 SControl 300)
609[ 3.043045] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
610[ 3.043047] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
611[ 3.043050] sd 1:0:0:0: [sdb] 4096-byte physical blocks
612[ 3.043071] sd 0:0:0:0: [sda] Write Protect is off
613[ 3.043072] sd 1:0:0:0: [sdb] Write Protect is off
614[ 3.043075] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
615[ 3.043077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
616[ 3.043120] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
617[ 3.043141] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
618[ 3.047268] sda: sda1 sda2 sda3 sda5 sda6 sda7
619[ 3.048306] sd 0:0:0:0: [sda] Attached SCSI disk
620[ 3.173353] scsi 6:0:0:0: CD-ROM Linux File-Stor Gadget 0000 PQ: 0 ANSI: 2
621[ 3.180012] sr 6:0:0:0: [sr0] scsi-1 drive
622[ 3.180015] cdrom: Uniform CD-ROM driver Revision: 3.20
623[ 3.180348] sr 6:0:0:0: Attached scsi CD-ROM sr0
624[ 3.451287] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
625[ 3.452015] sd 1:0:0:0: [sdb] Attached SCSI disk
626[ 4.404027] raid6: sse2x1 gen() 8575 MB/s
627[ 4.472029] raid6: sse2x1 xor() 6980 MB/s
628[ 4.540034] raid6: sse2x2 gen() 11112 MB/s
629[ 4.608035] raid6: sse2x2 xor() 7979 MB/s
630[ 4.676037] raid6: sse2x4 gen() 13095 MB/s
631[ 4.744040] raid6: sse2x4 xor() 9707 MB/s
632[ 4.744041] raid6: using algorithm sse2x4 gen() 13095 MB/s
633[ 4.744042] raid6: .... xor() 9707 MB/s, rmw enabled
634[ 4.744042] raid6: using ssse3x2 recovery algorithm
635[ 4.744198] xor: automatically using best checksumming function avx
636[ 4.744320] async_tx: api initialized (async)
637[ 4.760068] Btrfs loaded, crc32c=crc32c-intel
638[ 5.503307] PM: Starting manual resume from disk
639[ 5.503313] PM: Hibernation image partition 8:18 present
640[ 5.503314] PM: Looking for hibernation image.
641[ 5.503474] PM: Image not found (code -22)
642[ 5.503476] PM: Hibernation image not present or could not be loaded.
643[ 5.643173] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
644[ 5.757512] ip_tables: (C) 2000-2006 Netfilter Core Team
645[ 5.762023] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
646[ 5.762121] systemd[1]: Detected architecture x86-64.
647[ 5.762267] systemd[1]: Set hostname to <universi-mcbk52>.
648[ 5.840088] random: crng init done
649[ 5.896613] systemd[1]: Listening on Journal Socket (/dev/log).
650[ 5.896794] systemd[1]: Created slice User and Session Slice.
651[ 5.896823] systemd[1]: Listening on LVM2 poll daemon socket.
652[ 5.896857] systemd[1]: Listening on udev Control Socket.
653[ 5.896959] systemd[1]: Created slice System Slice.
654[ 5.897437] systemd[1]: Mounting RPC Pipe File System...
655[ 5.897996] systemd[1]: Mounting Huge Pages File System...
656[ 5.918122] EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
657[ 5.919005] RPC: Registered named UNIX socket transport module.
658[ 5.919006] RPC: Registered udp transport module.
659[ 5.919006] RPC: Registered tcp transport module.
660[ 5.919007] RPC: Registered tcp NFSv4.1 backchannel transport module.
661[ 5.924509] lp: driver loaded but no devices found
662[ 5.926310] ppdev: user-space parallel port driver
663[ 6.043327] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
664[ 6.043332] ACPI: Sleep Button [SLPB]
665[ 6.043616] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
666[ 6.043701] ACPI: Lid Switch [LID]
667[ 6.043753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
668[ 6.043755] ACPI: Power Button [PWRF]
669[ 6.085113] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
670[ 6.088155] ACPI: AC Adapter [AC] (on-line)
671[ 6.089011] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247)
672[ 6.089016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
673[ 6.089018] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
674[ 6.089020] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
675[ 6.089021] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
676[ 6.089024] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
677[ 6.089024] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
678[ 6.089026] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
679[ 6.089027] lpc_ich: Resource conflict(s) found affecting gpio_ich
680[ 6.094612] Non-volatile memory driver v1.3
681[ 6.095879] ACPI: Battery Slot [BAT0] (battery present)
682[ 6.095964] ACPI: Battery Slot [BAT1] (battery absent)
683[ 6.112708] thinkpad_acpi: ThinkPad ACPI Extras v0.25
684[ 6.112709] thinkpad_acpi: http://ibm-acpi.sf.net/
685[ 6.112709] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1272-gd533b16669, EC G7HT39WW-3.22
686[ 6.112710] thinkpad_acpi: Lenovo ThinkPad T430s, model 23539LU
687[ 6.113243] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
688[ 6.113426] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
689[ 6.113500] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
690[ 6.113501] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
691[ 6.115466] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
692[ 6.115549] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
693[ 6.116834] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
694[ 6.119050] sd 0:0:0:0: Attached scsi generic sg0 type 0
695[ 6.119087] sd 1:0:0:0: Attached scsi generic sg1 type 0
696[ 6.119123] sr 6:0:0:0: Attached scsi generic sg2 type 5
697[ 6.121143] ath: phy0: Killer Wireless card detected
698[ 6.122266] input: PC Speaker as /devices/platform/pcspkr/input/input8
699[ 6.131700] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
700[ 6.131702] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
701[ 6.131703] RAPL PMU: hw unit of domain package 2^-16 Joules
702[ 6.131703] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
703[ 6.133002] ath: phy0: ASPM enabled: 0x43
704[ 6.133005] ath: EEPROM regdomain: 0x60
705[ 6.133006] ath: EEPROM indicates we should expect a direct regpair map
706[ 6.133008] ath: Country alpha2 being used: 00
707[ 6.133008] ath: Regpair used: 0x60
708[ 6.139886] [drm] Memory usable by graphics device = 2048M
709[ 6.139889] checking generic (e0000000 580000) vs hw (e0000000 10000000)
710[ 6.139890] fb: switching to inteldrmfb from EFI VGA
711[ 6.139928] Console: switching to colour dummy device 80x25
712[ 6.140033] [drm] Replacing VGA console driver
713[ 6.140499] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
714[ 6.141069] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffff9d34c13e0000, irq=17
715[ 6.144439] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
716[ 6.144441] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
717[ 6.144442] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
718[ 6.144443] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
719[ 6.144444] snd_hda_codec_realtek hdaudioC0D0: inputs:
720[ 6.144445] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
721[ 6.144446] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
722[ 6.144447] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
723[ 6.187805] iTCO_vendor_support: vendor-support=0
724[ 6.188458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
725[ 6.188500] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
726[ 6.189099] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
727[ 6.197389] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
728[ 6.197391] [drm] Driver supports precise vblank timestamp query.
729[ 6.197676] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
730[ 6.214389] intel_rapl: Found RAPL domain package
731[ 6.214390] intel_rapl: Found RAPL domain core
732[ 6.214391] intel_rapl: Found RAPL domain uncore
733[ 6.271806] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
734[ 6.271955] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
735[ 6.273086] acpi device:03: registered as cooling_device5
736[ 6.273139] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
737[ 6.278747] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
738[ 6.281289] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr
739[ 6.283621] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
740[ 6.484360] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
741[ 6.607376] Adding 8389628k swap on /dev/sdb2. Priority:-1 extents:1 across:8389628k FS
742[ 6.688297] fbcon: inteldrmfb (fb0) is primary device
743[ 7.146810] usbcore: registered new interface driver cdc_wdm
744[ 7.147351] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
745[ 7.148041] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
746[ 7.148098] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
747[ 7.148186] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
748[ 7.148366] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
749[ 7.148419] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
750[ 7.148481] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
751[ 7.148538] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
752[ 7.148574] qmi_wwan 1-4:1.5: cdc-wdm0: USB WDM device
753[ 7.149547] qmi_wwan 1-4:1.5 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-4, WWAN/QMI device, 06:56:44:23:c3:02
754[ 7.149602] usbcore: registered new interface driver qmi_wwan
755[ 7.545607] Console: switching to colour frame buffer device 200x56
756[ 7.568910] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
757[ 7.569046] usbcore: registered new interface driver usbserial
758[ 7.569071] usbcore: registered new interface driver usbserial_generic
759[ 7.569098] usbserial: USB Serial support registered for generic
760[ 7.572473] usbcore: registered new interface driver option
761[ 7.572488] usbserial: USB Serial support registered for GSM modem (1-port)
762[ 7.572595] option 1-4:1.0: GSM modem (1-port) converter detected
763[ 7.572987] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0
764[ 7.573050] option 1-4:1.1: GSM modem (1-port) converter detected
765[ 7.573135] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1
766[ 7.573193] option 1-4:1.2: GSM modem (1-port) converter detected
767[ 7.573268] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB2
768[ 7.573323] option 1-4:1.3: GSM modem (1-port) converter detected
769[ 7.573397] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB3
770[ 7.573455] option 1-4:1.4: GSM modem (1-port) converter detected
771[ 7.573517] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB4
772[ 7.575756] qmi_wwan 1-4:1.5 wwp0s20u4i5: renamed from wwan0
773[ 7.650683] media: Linux media interface: v0.10
774[ 7.656211] Linux video capture interface: v2.00
775[ 7.667765] Bluetooth: Core ver 2.22
776[ 7.667777] NET: Registered protocol family 31
777[ 7.667778] Bluetooth: HCI device and connection manager initialized
778[ 7.667781] Bluetooth: HCI socket layer initialized
779[ 7.667783] Bluetooth: L2CAP socket layer initialized
780[ 7.667793] Bluetooth: SCO socket layer initialized
781[ 7.732625] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
782[ 7.734322] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized!
783[ 7.734324] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized!
784[ 7.734325] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized!
785[ 7.734326] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized!
786[ 7.734396] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input18
787[ 7.734449] usbcore: registered new interface driver uvcvideo
788[ 7.734449] USB Video Class driver (1.1.1)
789[ 7.744772] usbcore: registered new interface driver btusb
790[ 8.327309] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
791[ 9.174911] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: user_xattr
792[ 9.282041] systemd-journald[305]: Received request to flush runtime journal from PID 1
793[ 9.283652] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
794[ 9.421327] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: user_xattr
795[ 9.599646] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
796[ 10.038620] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: user_xattr
797[ 10.301678] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: user_xattr
798[ 10.750052] nfc: nfc_init: NFC Core ver 0.1
799[ 10.750499] NET: Registered protocol family 39
800[ 10.768574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
801[ 10.768575] Bluetooth: BNEP filters: protocol multicast
802[ 10.768580] Bluetooth: BNEP socket layer initialized
803[ 11.000179] ata1.00: configured for UDMA/133
804[ 11.000183] ata1: EH complete
805[ 11.065246] ata2.00: configured for UDMA/133
806[ 11.065250] ata2: EH complete
807[ 13.981294] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
808[ 14.240698] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
809[ 14.248468] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
810[ 14.259157] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
811[ 14.275508] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
812[ 14.578824] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
813[ 16.380477] ip6_tables: (C) 2000-2006 Netfilter Core Team
814[ 16.390749] Ebtables v2.0 registered
815[ 18.431090] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
816[ 18.486410] wlan0: authenticate with f8:1a:67:5a:c4:75
817[ 18.497273] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
818[ 18.498901] wlan0: authenticated
819[ 18.500718] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
820[ 18.502315] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=2)
821[ 18.502443] wlan0: associated
822[ 18.502451] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
823[ 18.514924] ath: EEPROM regdomain: 0x809c
824[ 18.514925] ath: EEPROM indicates we should expect a country code
825[ 18.514926] ath: doing EEPROM country->regdmn map search
826[ 18.514927] ath: country maps to regdmn code: 0x52
827[ 18.514928] ath: Country alpha2 being used: CN
828[ 18.514929] ath: Regpair used: 0x52
829[ 18.514930] ath: regdomain 0x809c dynamically updated by country IE
830[ 22.160857] Bluetooth: RFCOMM TTY layer initialized
831[ 22.160864] Bluetooth: RFCOMM socket layer initialized
832[ 22.160869] Bluetooth: RFCOMM ver 1.11