ExPLIT | 689b19f | 2019-12-30 13:32:57 +0100 | [diff] [blame] | 1 | [ 0.000000] Linux version 5.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.4.6-1 (2019-12-27) |
| 2 | [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| 3 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| 4 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| 5 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| 6 | [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| 7 | [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| 8 | [ 0.000000] BIOS-provided physical RAM map: |
| 9 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 10 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff24fff] usable |
| 13 | [ 0.000000] BIOS-e820: [mem 0x000000007ff25000-0x00000000829fffff] reserved |
| 14 | [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| 15 | [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| 16 | [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| 17 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| 18 | [ 0.000000] NX (Execute Disable) protection: active |
| 19 | [ 0.000000] SMBIOS 2.8 present. |
| 20 | [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-630-g536799d5f6 12/30/2019 |
| 21 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 22 | [ 0.000000] tsc: Detected 2893.401 MHz processor |
| 23 | [ 0.002031] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 24 | [ 0.002032] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 25 | [ 0.002035] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| 26 | [ 0.002040] MTRR default type: write-back |
| 27 | [ 0.002040] MTRR fixed ranges enabled: |
| 28 | [ 0.002041] 00000-9FFFF write-back |
| 29 | [ 0.002042] A0000-BFFFF uncachable |
| 30 | [ 0.002043] C0000-FFFFF write-back |
| 31 | [ 0.002043] MTRR variable ranges enabled: |
| 32 | [ 0.002045] 0 base 080000000 mask FC0000000 uncachable |
| 33 | [ 0.002045] 1 base 0C0000000 mask FF0000000 uncachable |
| 34 | [ 0.002046] 2 base 0D0000000 mask FF0000000 write-combining |
| 35 | [ 0.002047] 3 base 0E0000000 mask FE0000000 uncachable |
| 36 | [ 0.002047] 4 disabled |
| 37 | [ 0.002048] 5 disabled |
| 38 | [ 0.002048] 6 disabled |
| 39 | [ 0.002048] 7 disabled |
| 40 | [ 0.002049] 8 disabled |
| 41 | [ 0.002049] 9 disabled |
| 42 | [ 0.002328] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| 43 | [ 0.002689] last_pfn = 0x7ff25 max_arch_pfn = 0x400000000 |
| 44 | [ 0.012091] BRK [0x2ad801000, 0x2ad801fff] PGTABLE |
| 45 | [ 0.012093] BRK [0x2ad802000, 0x2ad802fff] PGTABLE |
| 46 | [ 0.012094] BRK [0x2ad803000, 0x2ad803fff] PGTABLE |
| 47 | [ 0.012118] BRK [0x2ad804000, 0x2ad804fff] PGTABLE |
| 48 | [ 0.012119] BRK [0x2ad805000, 0x2ad805fff] PGTABLE |
| 49 | [ 0.012192] BRK [0x2ad806000, 0x2ad806fff] PGTABLE |
| 50 | [ 0.012211] BRK [0x2ad807000, 0x2ad807fff] PGTABLE |
| 51 | [ 0.012387] RAMDISK: [mem 0x30d7f000-0x346b6fff] |
| 52 | [ 0.012393] ACPI: Early table checksum verification disabled |
| 53 | [ 0.012396] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4) |
| 54 | [ 0.012399] ACPI: XSDT 0x000000007FF4B0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| 55 | [ 0.012404] ACPI: FACP 0x000000007FF4EC40 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| 56 | [ 0.012408] ACPI: DSDT 0x000000007FF4B280 0039C0 (v02 COREv4 COREBOOT 20110725 INTL 20190703) |
| 57 | [ 0.012411] ACPI: FACS 0x000000007FF4B240 000040 |
| 58 | [ 0.012413] ACPI: FACS 0x000000007FF4B240 000040 |
| 59 | [ 0.012415] ACPI: SSDT 0x000000007FF4ED40 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| 60 | [ 0.012418] ACPI: MCFG 0x000000007FF50850 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| 61 | [ 0.012421] ACPI: TCPA 0x000000007FF50890 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| 62 | [ 0.012423] ACPI: APIC 0x000000007FF508D0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| 63 | [ 0.012426] ACPI: DMAR 0x000000007FF50940 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| 64 | [ 0.012428] ACPI: HPET 0x000000007FF52A10 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| 65 | [ 0.012435] ACPI: Local APIC address 0xfee00000 |
| 66 | [ 0.012507] No NUMA configuration found |
| 67 | [ 0.012508] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| 68 | [ 0.012511] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| 69 | [ 0.012541] Zone ranges: |
| 70 | [ 0.012542] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| 71 | [ 0.012543] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| 72 | [ 0.012544] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| 73 | [ 0.012545] Device empty |
| 74 | [ 0.012546] Movable zone start for each node |
| 75 | [ 0.012547] Early memory node ranges |
| 76 | [ 0.012548] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| 77 | [ 0.012549] node 0: [mem 0x0000000000100000-0x000000007ff24fff] |
| 78 | [ 0.012550] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| 79 | [ 0.012560] Zeroed struct page in unavailable ranges: 317 pages |
| 80 | [ 0.012561] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| 81 | [ 0.012562] On node 0 totalpages: 4175043 |
| 82 | [ 0.012563] DMA zone: 64 pages used for memmap |
| 83 | [ 0.012564] DMA zone: 21 pages reserved |
| 84 | [ 0.012564] DMA zone: 3998 pages, LIFO batch:0 |
| 85 | [ 0.012612] DMA32 zone: 8125 pages used for memmap |
| 86 | [ 0.012612] DMA32 zone: 519973 pages, LIFO batch:63 |
| 87 | [ 0.020692] Normal zone: 57048 pages used for memmap |
| 88 | [ 0.020694] Normal zone: 3651072 pages, LIFO batch:63 |
| 89 | [ 0.060654] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| 90 | [ 0.061012] ACPI: PM-Timer IO Port: 0x508 |
| 91 | [ 0.061014] ACPI: Local APIC address 0xfee00000 |
| 92 | [ 0.061030] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| 93 | [ 0.061032] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 94 | [ 0.061034] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 95 | [ 0.061035] ACPI: IRQ0 used by override. |
| 96 | [ 0.061036] ACPI: IRQ9 used by override. |
| 97 | [ 0.061038] Using ACPI (MADT) for SMP configuration information |
| 98 | [ 0.061039] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| 99 | [ 0.061043] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 100 | [ 0.061053] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| 101 | [ 0.061054] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 102 | [ 0.061055] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 103 | [ 0.061056] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 104 | [ 0.061057] PM: Registered nosave memory: [mem 0x7ff25000-0x829fffff] |
| 105 | [ 0.061058] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| 106 | [ 0.061058] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| 107 | [ 0.061059] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| 108 | [ 0.061060] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| 109 | [ 0.061061] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| 110 | [ 0.061061] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| 111 | [ 0.061062] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| 112 | [ 0.061064] [mem 0x82a00000-0xefffffff] available for PCI devices |
| 113 | [ 0.061065] Booting paravirtualized kernel on bare hardware |
| 114 | [ 0.061068] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| 115 | [ 0.147737] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| 116 | [ 0.147917] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u524288 |
| 117 | [ 0.147923] pcpu-alloc: s178584 r8192 d30312 u524288 alloc=1*2097152 |
| 118 | [ 0.147924] pcpu-alloc: [0] 0 1 2 3 |
| 119 | [ 0.147943] Built 1 zonelists, mobility grouping on. Total pages: 4109785 |
| 120 | [ 0.147944] Policy zone: Normal |
| 121 | [ 0.147946] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| 122 | [ 0.148736] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| 123 | [ 0.149113] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| 124 | [ 0.149161] mem auto-init: stack:off, heap alloc:off, heap free:off |
| 125 | [ 0.152158] Calgary: detecting Calgary via BIOS EBDA area |
| 126 | [ 0.152163] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 127 | [ 0.190553] Memory: 16263236K/16700172K available (10243K kernel code, 1196K rwdata, 3732K rodata, 1668K init, 2060K bss, 436936K reserved, 0K cma-reserved) |
| 128 | [ 0.190657] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| 129 | [ 0.190668] Kernel/User page tables isolation: enabled |
| 130 | [ 0.190681] ftrace: allocating 33546 entries in 132 pages |
| 131 | [ 0.201995] rcu: Hierarchical RCU implementation. |
| 132 | [ 0.201997] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| 133 | [ 0.201999] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| 134 | [ 0.201999] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| 135 | [ 0.204668] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| 136 | [ 0.204876] random: crng done (trusting CPU's manufacturer) |
| 137 | [ 0.206448] Console: colour VGA+ 80x25 |
| 138 | [ 0.211957] printk: console [tty0] enabled |
| 139 | [ 0.212027] ACPI: Core revision 20190816 |
| 140 | [ 0.212144] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| 141 | [ 0.212229] APIC: Switch to symmetric I/O mode setup |
| 142 | [ 0.212285] DMAR: Host address width 36 |
| 143 | [ 0.212338] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| 144 | [ 0.212397] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| 145 | [ 0.212467] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| 146 | [ 0.212524] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| 147 | [ 0.212584] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| 148 | [ 0.212654] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| 149 | [ 0.212712] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| 150 | [ 0.212768] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| 151 | [ 0.213227] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| 152 | [ 0.213286] x2apic enabled |
| 153 | [ 0.213343] Switched APIC routing to cluster x2apic. |
| 154 | [ 0.213827] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 155 | [ 0.232230] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b4e96ecc9, max_idle_ns: 440795280616 ns |
| 156 | [ 0.232307] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.80 BogoMIPS (lpj=11573604) |
| 157 | [ 0.232381] pid_max: default: 32768 minimum: 301 |
| 158 | [ 0.232460] LSM: Security Framework initializing |
| 159 | [ 0.232520] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 160 | [ 0.232594] AppArmor: AppArmor initialized |
| 161 | [ 0.232649] TOMOYO Linux initialized |
| 162 | [ 0.232743] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| 163 | [ 0.232838] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| 164 | [ 0.233121] mce: CPU0: Thermal monitoring enabled (TM1) |
| 165 | [ 0.233186] process: using mwait in idle threads |
| 166 | [ 0.233245] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| 167 | [ 0.233301] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| 168 | [ 0.233360] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| 169 | [ 0.233431] Spectre V2 : Mitigation: Full generic retpoline |
| 170 | [ 0.233489] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| 171 | [ 0.233560] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| 172 | [ 0.233619] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| 173 | [ 0.233689] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| 174 | [ 0.233748] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| 175 | [ 0.233822] MDS: Mitigation: Clear CPU buffers |
| 176 | [ 0.234027] Freeing SMP alternatives memory: 24K |
| 177 | [ 0.235671] TSC deadline timer enabled |
| 178 | [ 0.235674] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| 179 | [ 0.235843] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| 180 | [ 0.235922] ... version: 3 |
| 181 | [ 0.235976] ... bit width: 48 |
| 182 | [ 0.236032] ... generic registers: 4 |
| 183 | [ 0.236086] ... value mask: 0000ffffffffffff |
| 184 | [ 0.236142] ... max period: 00007fffffffffff |
| 185 | [ 0.236199] ... fixed-purpose events: 3 |
| 186 | [ 0.236254] ... event mask: 000000070000000f |
| 187 | [ 0.236304] rcu: Hierarchical SRCU implementation. |
| 188 | [ 0.236304] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| 189 | [ 0.236304] smp: Bringing up secondary CPUs ... |
| 190 | [ 0.236304] x86: Booting SMP configuration: |
| 191 | [ 0.236304] .... node #0, CPUs: #1 |
| 192 | [ 0.236387] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| 193 | [ 0.236554] #2 #3 |
| 194 | [ 0.242378] smp: Brought up 1 node, 4 CPUs |
| 195 | [ 0.242378] smpboot: Max logical packages: 1 |
| 196 | [ 0.242378] smpboot: Total of 4 processors activated (23147.20 BogoMIPS) |
| 197 | [ 0.242378] devtmpfs: initialized |
| 198 | [ 0.242378] x86/mm: Memory block size: 128MB |
| 199 | [ 0.245639] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| 200 | [ 0.245639] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| 201 | [ 0.245639] pinctrl core: initialized pinctrl subsystem |
| 202 | [ 0.245639] NET: Registered protocol family 16 |
| 203 | [ 0.245639] audit: initializing netlink subsys (disabled) |
| 204 | [ 0.245639] audit: type=2000 audit(1577709020.032:1): state=initialized audit_enabled=0 res=1 |
| 205 | [ 0.245639] cpuidle: using governor ladder |
| 206 | [ 0.245639] cpuidle: using governor menu |
| 207 | [ 0.245639] ACPI: bus type PCI registered |
| 208 | [ 0.245639] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 209 | [ 0.245917] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| 210 | [ 0.245991] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| 211 | [ 0.246057] PCI: Using configuration type 1 for base access |
| 212 | [ 0.246130] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| 213 | [ 0.249044] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| 214 | [ 0.396504] ACPI: Added _OSI(Module Device) |
| 215 | [ 0.396504] ACPI: Added _OSI(Processor Device) |
| 216 | [ 0.396504] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 217 | [ 0.396542] ACPI: Added _OSI(Processor Aggregator Device) |
| 218 | [ 0.396598] ACPI: Added _OSI(Linux-Dell-Video) |
| 219 | [ 0.396654] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| 220 | [ 0.396711] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| 221 | [ 0.398783] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| 222 | [ 0.400903] ACPI: EC: EC started |
| 223 | [ 0.400957] ACPI: EC: interrupt blocked |
| 224 | [ 0.401290] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| 225 | [ 0.401349] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| 226 | [ 0.401419] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| 227 | [ 0.401487] ACPI: Interpreter enabled |
| 228 | [ 0.401557] ACPI: (supports S0 S3 S4 S5) |
| 229 | [ 0.401612] ACPI: Using IOAPIC for interrupt routing |
| 230 | [ 0.401683] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 231 | [ 0.401862] ACPI: Enabled 1 GPEs in block 00 to 3F |
| 232 | [ 0.404936] ACPI: Power Resource [FPWR] (off) |
| 233 | [ 0.405237] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 234 | [ 0.405298] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| 235 | [ 0.405407] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| 236 | [ 0.405486] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| 237 | [ 0.405599] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| 238 | [ 0.405676] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| 239 | [ 0.405883] PCI host bridge to bus 0000:00 |
| 240 | [ 0.405940] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| 241 | [ 0.406000] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| 242 | [ 0.406060] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| 243 | [ 0.406130] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| 244 | [ 0.406199] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| 245 | [ 0.406268] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| 246 | [ 0.406337] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| 247 | [ 0.406405] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| 248 | [ 0.406472] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| 249 | [ 0.406541] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| 250 | [ 0.406611] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| 251 | [ 0.406681] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| 252 | [ 0.406749] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| 253 | [ 0.406820] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| 254 | [ 0.406890] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| 255 | [ 0.406960] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| 256 | [ 0.407029] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 257 | [ 0.407094] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| 258 | [ 0.407237] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| 259 | [ 0.407304] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit] |
| 260 | [ 0.407366] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| 261 | [ 0.407438] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] |
| 262 | [ 0.407566] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| 263 | [ 0.407633] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit] |
| 264 | [ 0.407775] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| 265 | [ 0.407856] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit] |
| 266 | [ 0.407980] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| 267 | [ 0.408112] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| 268 | [ 0.408189] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff] |
| 269 | [ 0.408253] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff] |
| 270 | [ 0.408314] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] |
| 271 | [ 0.408428] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| 272 | [ 0.408547] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| 273 | [ 0.408626] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff] |
| 274 | [ 0.408763] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| 275 | [ 0.408893] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| 276 | [ 0.408972] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit] |
| 277 | [ 0.409101] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| 278 | [ 0.409236] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| 279 | [ 0.409448] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| 280 | [ 0.409533] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| 281 | [ 0.409591] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| 282 | [ 0.409729] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| 283 | [ 0.409961] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| 284 | [ 0.410044] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| 285 | [ 0.410101] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| 286 | [ 0.410240] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400 |
| 287 | [ 0.410473] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| 288 | [ 0.410559] pci 0000:00:1c.2: Enabling MPC IRBNCE |
| 289 | [ 0.410616] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled |
| 290 | [ 0.410755] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| 291 | [ 0.410832] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff] |
| 292 | [ 0.410970] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| 293 | [ 0.411098] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| 294 | [ 0.411322] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| 295 | [ 0.411397] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087] |
| 296 | [ 0.411460] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093] |
| 297 | [ 0.411524] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f] |
| 298 | [ 0.411588] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097] |
| 299 | [ 0.411652] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] |
| 300 | [ 0.411716] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff] |
| 301 | [ 0.411816] pci 0000:00:1f.2: PME# supported from D3hot |
| 302 | [ 0.411938] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| 303 | [ 0.412013] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit] |
| 304 | [ 0.412090] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| 305 | [ 0.412228] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| 306 | [ 0.412309] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit] |
| 307 | [ 0.412590] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| 308 | [ 0.412738] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit] |
| 309 | [ 0.412855] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit] |
| 310 | [ 0.413164] pci 0000:01:00.0: supports D1 D2 |
| 311 | [ 0.413220] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 312 | [ 0.413548] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 313 | [ 0.413614] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| 314 | [ 0.413851] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| 315 | [ 0.414142] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| 316 | [ 0.414444] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| 317 | [ 0.415008] pci 0000:02:00.0: supports D1 D2 |
| 318 | [ 0.415064] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 319 | [ 0.415505] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 320 | [ 0.415564] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| 321 | [ 0.415623] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| 322 | [ 0.415690] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| 323 | [ 0.415829] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| 324 | [ 0.415890] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| 325 | [ 0.415952] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| 326 | [ 0.416018] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| 327 | [ 0.416235] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 328 | [ 0.416337] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 329 | [ 0.416431] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 330 | [ 0.416525] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 331 | [ 0.416618] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 332 | [ 0.416710] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 333 | [ 0.416803] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 334 | [ 0.416895] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| 335 | [ 0.417803] ACPI: EC: interrupt unblocked |
| 336 | [ 0.417865] ACPI: EC: event unblocked |
| 337 | [ 0.417926] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| 338 | [ 0.417994] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| 339 | [ 0.418112] iommu: Default domain type: Translated |
| 340 | [ 0.418178] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| 341 | [ 0.418178] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| 342 | [ 0.418178] pci 0000:00:02.0: vgaarb: bridge control possible |
| 343 | [ 0.418178] vgaarb: loaded |
| 344 | [ 0.418178] EDAC MC: Ver: 3.0.0 |
| 345 | [ 0.418178] PCI: Using ACPI for IRQ routing |
| 346 | [ 0.420372] PCI: pci_cache_line_size set to 64 bytes |
| 347 | [ 0.420900] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 348 | [ 0.420901] e820: reserve RAM buffer [mem 0x7ff25000-0x7fffffff] |
| 349 | [ 0.420901] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| 350 | [ 0.421480] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| 351 | [ 0.421542] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| 352 | [ 0.423621] clocksource: Switched to clocksource tsc-early |
| 353 | [ 0.429324] VFS: Disk quotas dquot_6.6.0 |
| 354 | [ 0.429397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 355 | [ 0.429550] AppArmor: AppArmor Filesystem Enabled |
| 356 | [ 0.429624] pnp: PnP ACPI init |
| 357 | [ 0.429809] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| 358 | [ 0.429916] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| 359 | [ 0.429976] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| 360 | [ 0.430035] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| 361 | [ 0.430094] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| 362 | [ 0.431358] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| 363 | [ 0.431418] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| 364 | [ 0.431478] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| 365 | [ 0.431537] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| 366 | [ 0.431597] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| 367 | [ 0.431654] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| 368 | [ 0.431718] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 369 | [ 0.432131] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| 370 | [ 0.432191] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| 371 | [ 0.432222] system 00:02: [io 0x0500-0x057f] has been reserved |
| 372 | [ 0.432279] system 00:02: [io 0x0480-0x04bf] has been reserved |
| 373 | [ 0.432346] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 374 | [ 0.432362] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 375 | [ 0.432386] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 376 | [ 0.432405] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 377 | [ 0.432424] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| 378 | [ 0.432440] pnp: PnP ACPI: found 7 devices |
| 379 | [ 0.433498] thermal_sys: Registered thermal governor 'fair_share' |
| 380 | [ 0.433499] thermal_sys: Registered thermal governor 'bang_bang' |
| 381 | [ 0.433558] thermal_sys: Registered thermal governor 'step_wise' |
| 382 | [ 0.433616] thermal_sys: Registered thermal governor 'user_space' |
| 383 | [ 0.438168] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| 384 | [ 0.438329] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 385 | [ 0.438393] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| 386 | [ 0.438462] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 387 | [ 0.438520] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| 388 | [ 0.438583] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| 389 | [ 0.438646] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| 390 | [ 0.438723] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| 391 | [ 0.438781] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| 392 | [ 0.438843] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| 393 | [ 0.438905] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| 394 | [ 0.438981] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| 395 | [ 0.439040] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| 396 | [ 0.439098] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| 397 | [ 0.439157] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| 398 | [ 0.439217] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| 399 | [ 0.439275] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| 400 | [ 0.439336] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| 401 | [ 0.439396] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| 402 | [ 0.439456] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| 403 | [ 0.439516] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| 404 | [ 0.439574] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| 405 | [ 0.439633] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| 406 | [ 0.439691] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| 407 | [ 0.439750] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| 408 | [ 0.439811] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| 409 | [ 0.439871] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| 410 | [ 0.439930] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff] |
| 411 | [ 0.439990] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| 412 | [ 0.440049] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| 413 | [ 0.440108] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| 414 | [ 0.440178] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| 415 | [ 0.440235] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff] |
| 416 | [ 0.440293] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref] |
| 417 | [ 0.440427] NET: Registered protocol family 2 |
| 418 | [ 0.440603] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| 419 | [ 0.440691] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| 420 | [ 0.440905] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| 421 | [ 0.441075] TCP: Hash tables configured (established 131072 bind 65536) |
| 422 | [ 0.441155] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| 423 | [ 0.441241] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| 424 | [ 0.441362] NET: Registered protocol family 1 |
| 425 | [ 0.441421] NET: Registered protocol family 44 |
| 426 | [ 0.441484] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| 427 | [ 0.442317] PCI: CLS 64 bytes, default 64 |
| 428 | [ 0.442410] Trying to unpack rootfs image as initramfs... |
| 429 | [ 1.184715] Freeing initrd memory: 58592K |
| 430 | [ 1.184826] DMAR: No ATSR found |
| 431 | [ 1.184907] DMAR: dmar0: Using Queued invalidation |
| 432 | [ 1.184971] DMAR: dmar1: Using Queued invalidation |
| 433 | [ 1.255053] pci 0000:00:00.0: Adding to iommu group 0 |
| 434 | [ 1.257966] pci 0000:00:02.0: Adding to iommu group 1 |
| 435 | [ 1.258458] pci 0000:00:02.0: Using iommu direct mapping |
| 436 | [ 1.258543] pci 0000:00:04.0: Adding to iommu group 2 |
| 437 | [ 1.258634] pci 0000:00:14.0: Adding to iommu group 3 |
| 438 | [ 1.258721] pci 0000:00:19.0: Adding to iommu group 4 |
| 439 | [ 1.258814] pci 0000:00:1a.0: Adding to iommu group 5 |
| 440 | [ 1.258902] pci 0000:00:1b.0: Adding to iommu group 6 |
| 441 | [ 1.258995] pci 0000:00:1c.0: Adding to iommu group 7 |
| 442 | [ 1.259084] pci 0000:00:1c.1: Adding to iommu group 8 |
| 443 | [ 1.259178] pci 0000:00:1c.2: Adding to iommu group 9 |
| 444 | [ 1.259273] pci 0000:00:1d.0: Adding to iommu group 10 |
| 445 | [ 1.259370] pci 0000:00:1f.0: Adding to iommu group 11 |
| 446 | [ 1.259437] pci 0000:00:1f.2: Adding to iommu group 11 |
| 447 | [ 1.259502] pci 0000:00:1f.3: Adding to iommu group 11 |
| 448 | [ 1.259567] pci 0000:00:1f.6: Adding to iommu group 11 |
| 449 | [ 1.259660] pci 0000:01:00.0: Adding to iommu group 12 |
| 450 | [ 1.259751] pci 0000:02:00.0: Adding to iommu group 13 |
| 451 | [ 1.259991] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| 452 | [ 1.261838] Initialise system trusted keyrings |
| 453 | [ 1.261903] Key type blacklist registered |
| 454 | [ 1.261996] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| 455 | [ 1.263063] zbud: loaded |
| 456 | [ 1.263305] Platform Keyring initialized |
| 457 | [ 1.263363] Key type asymmetric registered |
| 458 | [ 1.263421] Asymmetric key parser 'x509' registered |
| 459 | [ 1.263484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| 460 | [ 1.263588] io scheduler mq-deadline registered |
| 461 | [ 1.263893] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| 462 | [ 1.264160] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| 463 | [ 1.264244] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| 464 | [ 1.264569] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| 465 | [ 1.264654] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| 466 | [ 1.264857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 467 | [ 1.264929] intel_idle: MWAIT substates: 0x21120 |
| 468 | [ 1.264930] intel_idle: v0.4.1 model 0x3A |
| 469 | [ 1.265088] intel_idle: lapic_timer_reliable_states 0xffffffff |
| 470 | [ 1.266387] thermal LNXTHERM:00: registered as thermal_zone0 |
| 471 | [ 1.266448] ACPI: Thermal Zone [THM0] (53 C) |
| 472 | [ 1.267282] thermal LNXTHERM:01: registered as thermal_zone1 |
| 473 | [ 1.267341] ACPI: Thermal Zone [THM1] (27 C) |
| 474 | [ 1.267490] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 475 | [ 1.268031] Linux agpgart interface v0.103 |
| 476 | [ 1.268129] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| 477 | [ 1.268188] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| 478 | [ 1.268495] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 479 | [ 1.270244] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 480 | [ 1.270305] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 481 | [ 1.270468] mousedev: PS/2 mouse device common for all mice |
| 482 | [ 1.270559] rtc_cmos 00:03: RTC can wake from S4 |
| 483 | [ 1.270768] rtc_cmos 00:03: registered as rtc0 |
| 484 | [ 1.270837] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| 485 | [ 1.270925] intel_pstate: Intel P-state driver initializing |
| 486 | [ 1.271189] ledtrig-cpu: registered to indicate activity on CPUs |
| 487 | [ 1.271422] drop_monitor: Initializing network drop monitor service |
| 488 | [ 1.271834] NET: Registered protocol family 10 |
| 489 | [ 1.271897] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 490 | [ 1.286752] Segment Routing with IPv6 |
| 491 | [ 1.286825] mip6: Mobile IPv6 |
| 492 | [ 1.286880] NET: Registered protocol family 17 |
| 493 | [ 1.286983] mpls_gso: MPLS GSO support |
| 494 | [ 1.287212] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| 495 | [ 1.287303] microcode: Microcode Update Driver: v2.2. |
| 496 | [ 1.287306] IPI shorthand broadcast: enabled |
| 497 | [ 1.287459] sched_clock: Marking stable (1279720669, 7455367)->(1294380268, -7204232) |
| 498 | [ 1.287777] registered taskstats version 1 |
| 499 | [ 1.287843] Loading compiled-in X.509 certificates |
| 500 | [ 1.324089] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| 501 | [ 1.324171] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| 502 | [ 1.324246] zswap: loaded using pool lzo/zbud |
| 503 | [ 1.324421] Key type ._fscrypt registered |
| 504 | [ 1.324478] Key type .fscrypt registered |
| 505 | [ 1.324545] AppArmor: AppArmor sha1 policy hashing enabled |
| 506 | [ 1.324857] rtc_cmos 00:03: setting system clock to 2019-12-30T12:30:21 UTC (1577709021) |
| 507 | [ 1.325650] Freeing unused kernel image memory: 1668K |
| 508 | [ 1.380403] Write protecting the kernel read-only data: 16384k |
| 509 | [ 1.381422] Freeing unused kernel image memory: 2036K |
| 510 | [ 1.381816] Freeing unused kernel image memory: 364K |
| 511 | [ 1.396737] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| 512 | [ 1.396797] x86/mm: Checking user space page tables |
| 513 | [ 1.403001] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| 514 | [ 1.403059] Run /init as init process |
| 515 | [ 1.521389] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2 |
| 516 | [ 1.521516] ACPI: Sleep Button [SLPB] |
| 517 | [ 1.521631] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3 |
| 518 | [ 1.521744] ACPI: Lid Switch [LID] |
| 519 | [ 1.521853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| 520 | [ 1.521958] ACPI: Power Button [PWRF] |
| 521 | [ 1.537814] pps_core: LinuxPPS API ver. 1 registered |
| 522 | [ 1.537895] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 523 | [ 1.538972] PTP clock support registered |
| 524 | [ 1.540209] battery: ACPI: Battery Slot [BAT0] (battery present) |
| 525 | [ 1.540416] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| 526 | [ 1.548064] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190816/utaddress-204) |
| 527 | [ 1.549343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 528 | [ 1.549467] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| 529 | [ 1.549559] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 530 | [ 1.549631] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| 531 | [ 1.549722] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 532 | [ 1.549795] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| 533 | [ 1.549886] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 534 | [ 1.549959] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| 535 | [ 1.560798] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| 536 | [ 1.560860] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| 537 | [ 1.561083] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 538 | [ 1.566518] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| 539 | [ 1.575150] ACPI: bus type USB registered |
| 540 | [ 1.575152] sdhci: Secure Digital Host Controller Interface driver |
| 541 | [ 1.575227] usbcore: registered new interface driver usbfs |
| 542 | [ 1.575268] sdhci: Copyright(c) Pierre Ossman |
| 543 | [ 1.575394] usbcore: registered new interface driver hub |
| 544 | [ 1.575474] usbcore: registered new device driver usb |
| 545 | [ 1.581318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 546 | [ 1.582227] ehci-pci: EHCI PCI platform driver |
| 547 | [ 1.582437] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| 548 | [ 1.582503] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| 549 | [ 1.582584] ehci-pci 0000:00:1a.0: debug port 2 |
| 550 | [ 1.586552] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| 551 | [ 1.587611] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000 |
| 552 | [ 1.588160] cryptd: max_cpu_qlen set to 1000 |
| 553 | [ 1.592572] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| 554 | [ 1.593018] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| 555 | [ 1.593287] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| 556 | [ 1.600779] AVX version of gcm_enc/dec engaged. |
| 557 | [ 1.600839] AES CTR mode by8 optimization enabled |
| 558 | [ 1.603087] SCSI subsystem initialized |
| 559 | [ 1.604405] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| 560 | [ 1.604511] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| 561 | [ 1.604583] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 562 | [ 1.604652] usb usb1: Product: EHCI Host Controller |
| 563 | [ 1.604710] usb usb1: Manufacturer: Linux 5.4.0-1-amd64 ehci_hcd |
| 564 | [ 1.604769] usb usb1: SerialNumber: 0000:00:1a.0 |
| 565 | [ 1.604953] hub 1-0:1.0: USB hub found |
| 566 | [ 1.605015] hub 1-0:1.0: 3 ports detected |
| 567 | [ 1.605201] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| 568 | [ 1.605265] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| 569 | [ 1.606411] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| 570 | [ 1.606488] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| 571 | [ 1.606700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| 572 | [ 1.606771] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 573 | [ 1.606841] usb usb2: Product: xHCI Host Controller |
| 574 | [ 1.606898] usb usb2: Manufacturer: Linux 5.4.0-1-amd64 xhci-hcd |
| 575 | [ 1.606957] usb usb2: SerialNumber: 0000:00:14.0 |
| 576 | [ 1.607109] hub 2-0:1.0: USB hub found |
| 577 | [ 1.607176] hub 2-0:1.0: 4 ports detected |
| 578 | [ 1.607392] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| 579 | [ 1.607452] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| 580 | [ 1.607524] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| 581 | [ 1.607635] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 |
| 582 | [ 1.607707] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 583 | [ 1.607778] usb usb3: Product: xHCI Host Controller |
| 584 | [ 1.607836] usb usb3: Manufacturer: Linux 5.4.0-1-amd64 xhci-hcd |
| 585 | [ 1.607895] usb usb3: SerialNumber: 0000:00:14.0 |
| 586 | [ 1.608051] hub 3-0:1.0: USB hub found |
| 587 | [ 1.608119] hub 3-0:1.0: 4 ports detected |
| 588 | [ 1.608611] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| 589 | [ 1.608674] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| 590 | [ 1.608755] ehci-pci 0000:00:1d.0: debug port 2 |
| 591 | [ 1.610478] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| 592 | [ 1.612736] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| 593 | [ 1.621792] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000 |
| 594 | [ 1.649717] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| 595 | [ 1.650416] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| 596 | [ 1.650494] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 597 | [ 1.650568] usb usb4: Product: EHCI Host Controller |
| 598 | [ 1.650629] usb usb4: Manufacturer: Linux 5.4.0-1-amd64 ehci_hcd |
| 599 | [ 1.650692] usb usb4: SerialNumber: 0000:00:1d.0 |
| 600 | [ 1.650901] hub 4-0:1.0: USB hub found |
| 601 | [ 1.650969] hub 4-0:1.0: 3 ports detected |
| 602 | [ 1.651476] libata version 3.00 loaded. |
| 603 | [ 1.656059] ahci 0000:00:1f.2: version 3.0 |
| 604 | [ 1.656235] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| 605 | [ 1.666402] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| 606 | [ 1.666477] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| 607 | [ 1.668324] scsi host0: ahci |
| 608 | [ 1.668507] scsi host1: ahci |
| 609 | [ 1.668638] scsi host2: ahci |
| 610 | [ 1.668770] scsi host3: ahci |
| 611 | [ 1.669070] scsi host4: ahci |
| 612 | [ 1.670771] scsi host5: ahci |
| 613 | [ 1.670890] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31 |
| 614 | [ 1.670978] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31 |
| 615 | [ 1.671050] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31 |
| 616 | [ 1.671120] ata4: DUMMY |
| 617 | [ 1.671174] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31 |
| 618 | [ 1.671244] ata6: DUMMY |
| 619 | [ 1.688053] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| 620 | [ 1.704028] i915 0000:00:02.0: VT-d active for gfx access |
| 621 | [ 1.704093] i915 0000:00:02.0: vgaarb: deactivate vga console |
| 622 | [ 1.705106] Console: switching to colour dummy device 80x25 |
| 623 | [ 1.705174] i915 0000:00:02.0: DMAR active, disabling use of stolen memory |
| 624 | [ 1.756328] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 625 | [ 1.756336] [drm] Driver supports precise vblank timestamp query. |
| 626 | [ 1.756615] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| 627 | [ 1.783956] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| 628 | [ 1.783960] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| 629 | [ 1.783998] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| 630 | [ 1.785068] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| 631 | [ 1.820213] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 |
| 632 | [ 1.820463] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| 633 | [ 1.845546] acpi device:0d: registered as cooling_device5 |
| 634 | [ 1.845644] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| 635 | [ 1.940317] usb 2-3: new high-speed USB device number 2 using xhci_hcd |
| 636 | [ 1.940327] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| 637 | [ 1.984363] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| 638 | [ 1.986800] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 639 | [ 1.987883] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| 640 | [ 1.987893] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| 641 | [ 1.988271] ata1.00: configured for UDMA/133 |
| 642 | [ 1.988548] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| 643 | [ 2.098078] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| 644 | [ 2.098083] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 645 | [ 2.098087] usb 2-3: Product: USB2.0 Hub |
| 646 | [ 2.098089] usb 2-3: Manufacturer: VIA Labs, Inc. |
| 647 | [ 2.098986] hub 2-3:1.0: USB hub found |
| 648 | [ 2.099179] hub 2-3:1.0: 4 ports detected |
| 649 | [ 2.100709] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| 650 | [ 2.100713] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 651 | [ 2.100856] hub 1-1:1.0: USB hub found |
| 652 | [ 2.100959] hub 1-1:1.0: 6 ports detected |
| 653 | [ 2.146147] fbcon: i915drmfb (fb0) is primary device |
| 654 | [ 2.149088] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| 655 | [ 2.149098] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 656 | [ 2.149376] hub 4-1:1.0: USB hub found |
| 657 | [ 2.149608] hub 4-1:1.0: 8 ports detected |
| 658 | [ 2.285641] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| 659 | [ 2.292354] tsc: Refined TSC clocksource calibration: 2893.426 MHz |
| 660 | [ 2.292370] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns |
| 661 | [ 2.292414] clocksource: Switched to clocksource tsc |
| 662 | [ 2.303555] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 663 | [ 2.304235] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| 664 | [ 2.340982] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| 665 | [ 2.340986] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| 666 | [ 2.365013] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| 667 | [ 2.365022] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| 668 | [ 2.388369] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| 669 | [ 2.390863] ata2.00: configured for UDMA/133 |
| 670 | [ 2.400634] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| 671 | [ 2.404526] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| 672 | [ 2.429793] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| 673 | [ 2.429799] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 674 | [ 2.429804] usb 3-3: Product: USB3.0 Hub |
| 675 | [ 2.429808] usb 3-3: Manufacturer: VIA Labs, Inc. |
| 676 | [ 2.432833] hub 3-3:1.0: USB hub found |
| 677 | [ 2.433068] hub 3-3:1.0: 4 ports detected |
| 678 | [ 2.436334] usb 4-1.5: new high-speed USB device number 3 using ehci-pci |
| 679 | [ 2.502183] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| 680 | [ 2.502187] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 681 | [ 2.502191] usb 1-1.3: Product: Biometric Coprocessor |
| 682 | [ 2.502193] usb 1-1.3: Manufacturer: Auth |
| 683 | [ 2.553157] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| 684 | [ 2.553162] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 685 | [ 2.553909] hub 4-1.5:1.0: USB hub found |
| 686 | [ 2.554057] hub 4-1.5:1.0: 6 ports detected |
| 687 | [ 2.584402] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| 688 | [ 2.699559] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping |
| 689 | [ 2.699563] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping |
| 690 | [ 2.701030] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| 691 | [ 2.701035] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 692 | [ 2.701038] usb 1-1.4: Product: BCM20702A0 |
| 693 | [ 2.701041] usb 1-1.4: Manufacturer: Broadcom Corp |
| 694 | [ 2.701043] usb 1-1.4: SerialNumber: B8763FA9D32E |
| 695 | [ 2.715340] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 696 | [ 2.715794] ata3.00: supports DRM functions and may not be fully accessible |
| 697 | [ 2.715917] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| 698 | [ 2.715919] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| 699 | [ 2.716668] ata3.00: Trusted Computing capability qword not valid! |
| 700 | [ 2.717127] ata3.00: supports DRM functions and may not be fully accessible |
| 701 | [ 2.717883] ata3.00: Trusted Computing capability qword not valid! |
| 702 | [ 2.717888] ata3.00: configured for UDMA/133 |
| 703 | [ 2.718293] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| 704 | [ 2.780399] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| 705 | [ 2.844391] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci |
| 706 | [ 2.896995] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| 707 | [ 2.897000] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 708 | [ 2.897004] usb 1-1.6: Product: Integrated Camera |
| 709 | [ 2.897007] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| 710 | [ 2.923385] Console: switching to colour frame buffer device 240x67 |
| 711 | [ 2.958649] usb 4-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 |
| 712 | [ 2.958904] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| 713 | [ 2.960228] usb 4-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 714 | [ 2.960230] usb 4-1.5.1: Product: USB Receiver |
| 715 | [ 2.976072] usb 4-1.5.1: Manufacturer: Logitech |
| 716 | [ 2.986023] hidraw: raw HID events driver (C) Jiri Kosina |
| 717 | [ 2.999379] usbcore: registered new interface driver usbhid |
| 718 | [ 3.001043] usbhid: USB HID core driver |
| 719 | [ 3.005198] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:046D:C52B.0001/input/input8 |
| 720 | [ 3.031239] ata5: SATA link down (SStatus 0 SControl 300) |
| 721 | [ 3.038197] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| 722 | [ 3.048171] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| 723 | [ 3.048226] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| 724 | [ 3.050130] sd 0:0:0:0: [sda] Write Protect is off |
| 725 | [ 3.051482] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| 726 | [ 3.051484] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| 727 | [ 3.051505] sd 1:0:0:0: [sdb] Write Protect is off |
| 728 | [ 3.051507] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| 729 | [ 3.051528] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 730 | [ 3.052017] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| 731 | [ 3.053918] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 732 | [ 3.055856] sd 2:0:0:0: [sdc] Write Protect is off |
| 733 | [ 3.057775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 734 | [ 3.059601] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| 735 | [ 3.060322] usb 4-1.5.3: new high-speed USB device number 5 using ehci-pci |
| 736 | [ 3.067651] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 737 | [ 3.068154] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| 738 | [ 3.071558] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input9 |
| 739 | [ 3.074469] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input10 |
| 740 | [ 3.077820] sda: sda1 sda2 < sda5 > |
| 741 | [ 3.079667] sd 0:0:0:0: [sda] Attached SCSI disk |
| 742 | [ 3.081637] sdc: sdc1 sdc2 sdc3 |
| 743 | [ 3.083466] sd 2:0:0:0: [sdc] Attached SCSI disk |
| 744 | [ 3.086928] sdb: sdb1 |
| 745 | [ 3.089234] sd 1:0:0:0: [sdb] Attached SCSI disk |
| 746 | [ 3.132362] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input11 |
| 747 | [ 3.133871] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| 748 | [ 3.135556] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| 749 | [ 3.169235] usb 4-1.5.3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| 750 | [ 3.172283] usb 4-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 751 | [ 3.175738] hub 4-1.5.3:1.0: USB hub found |
| 752 | [ 3.179165] hub 4-1.5.3:1.0: 3 ports detected |
| 753 | [ 3.249588] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| 754 | [ 3.260320] usb 4-1.5.6: new high-speed USB device number 6 using ehci-pci |
| 755 | [ 3.276991] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| 756 | [ 3.369400] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| 757 | [ 3.372747] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 758 | [ 3.376342] hub 4-1.5.6:1.0: USB hub found |
| 759 | [ 3.381151] hub 4-1.5.6:1.0: 4 ports detected |
| 760 | [ 3.402611] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input13 |
| 761 | [ 3.407490] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1 |
| 762 | [ 3.464085] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input17 |
| 763 | [ 3.467051] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1 |
| 764 | [ 3.472328] usb 4-1.5.3.3: new full-speed USB device number 7 using ehci-pci |
| 765 | [ 3.580313] raid6: sse2x4 gen() 13324 MB/s |
| 766 | [ 3.648309] raid6: sse2x4 xor() 6925 MB/s |
| 767 | [ 3.716313] raid6: sse2x2 gen() 13009 MB/s |
| 768 | [ 3.784309] raid6: sse2x2 xor() 8820 MB/s |
| 769 | [ 3.852312] raid6: sse2x1 gen() 10958 MB/s |
| 770 | [ 3.920311] raid6: sse2x1 xor() 7642 MB/s |
| 771 | [ 3.921817] raid6: using algorithm sse2x4 gen() 13324 MB/s |
| 772 | [ 3.923318] raid6: .... xor() 6925 MB/s, rmw enabled |
| 773 | [ 3.924842] raid6: using ssse3x2 recovery algorithm |
| 774 | [ 3.926358] usb 4-1.5.3.3: device descriptor read/64, error -32 |
| 775 | [ 3.928821] xor: automatically using best checksumming function avx |
| 776 | [ 3.931816] async_tx: api initialized (async) |
| 777 | [ 4.116439] device-mapper: uevent: version 1.0.3 |
| 778 | [ 4.118203] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com |
| 779 | [ 4.209091] usb 4-1.5.3.3: New USB device found, idVendor=056d, idProduct=0002, bcdDevice=75.30 |
| 780 | [ 4.212934] usb 4-1.5.3.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 |
| 781 | [ 4.215895] usb 4-1.5.3.3: Product: EIZO USB HID Monitor |
| 782 | [ 4.218808] usb 4-1.5.3.3: Manufacturer: EIZO |
| 783 | [ 4.248420] usb 4-1.5.2: new full-speed USB device number 8 using ehci-pci |
| 784 | [ 4.365210] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| 785 | [ 4.368957] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 786 | [ 4.378011] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0005/input/input18 |
| 787 | [ 4.440408] usb 4-1.5.6.1: new high-speed USB device number 9 using ehci-pci |
| 788 | [ 4.444779] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| 789 | [ 4.453542] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input19 |
| 790 | [ 4.455312] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input20 |
| 791 | [ 4.516575] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input21 |
| 792 | [ 4.522811] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input22 |
| 793 | [ 4.529651] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input23 |
| 794 | [ 4.531909] hid-generic 0003:056D:0002.0007: hiddev1,hidraw3: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3.3/input0 |
| 795 | [ 4.533821] hid-generic 0003:04B4:4042.0006: input,hiddev2,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| 796 | [ 4.557131] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| 797 | [ 4.561329] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 798 | [ 4.565839] hub 4-1.5.6.1:1.0: USB hub found |
| 799 | [ 4.568664] hub 4-1.5.6.1:1.0: 4 ports detected |
| 800 | [ 4.856406] usb 4-1.5.6.1.2: new full-speed USB device number 10 using ehci-pci |
| 801 | [ 4.975564] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| 802 | [ 4.979557] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 803 | [ 4.981974] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller |
| 804 | [ 4.984361] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| 805 | [ 5.068426] usb 4-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci |
| 806 | [ 5.182820] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| 807 | [ 5.186725] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 808 | [ 5.190554] usb 4-1.5.6.1.3: Product: USB-Serial Controller D |
| 809 | [ 5.192127] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| 810 | [ 17.086089] PM: Image not found (code -22) |
| 811 | [ 17.091983] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| 812 | [ 17.091986] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| 813 | [ 17.091991] PM: Marking nosave pages: [mem 0x7ff25000-0xffffffff] |
| 814 | [ 17.094645] PM: Basic memory bitmaps created |
| 815 | [ 17.095782] PM: Basic memory bitmaps freed |
| 816 | [ 17.096509] video LNXVIDEO:00: Restoring backlight state |
| 817 | [ 17.200101] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| 818 | [ 17.273257] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| 819 | [ 17.458961] systemd[1]: Inserted module 'autofs4' |
| 820 | [ 17.482652] systemd[1]: systemd 244-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| 821 | [ 17.504618] systemd[1]: Detected architecture x86-64. |
| 822 | [ 17.538207] systemd[1]: Set hostname to <TP-T430s>. |
| 823 | [ 17.660066] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| 824 | [ 17.702666] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| 825 | [ 17.706920] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| 826 | [ 17.728626] systemd[1]: /lib/systemd/system/fancontrol.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| 827 | [ 17.731642] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. |
| 828 | [ 17.739868] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. |
| 829 | [ 17.763432] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly. |
| 830 | [ 17.773187] systemd[1]: Created slice system-getty.slice. |
| 831 | [ 17.775625] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| 832 | [ 17.781794] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| 833 | [ 17.788941] systemd[1]: Created slice system-tor.slice. |
| 834 | [ 17.794437] systemd[1]: Created slice User and Session Slice. |
| 835 | [ 17.799681] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 836 | [ 17.803918] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 837 | [ 17.807964] systemd[1]: Reached target User and Group Name Lookups. |
| 838 | [ 17.812172] systemd[1]: Reached target Remote File Systems. |
| 839 | [ 17.817134] systemd[1]: Reached target Slices. |
| 840 | [ 17.818928] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| 841 | [ 17.822905] systemd[1]: Listening on LVM2 poll daemon socket. |
| 842 | [ 17.827178] systemd[1]: Listening on Syslog Socket. |
| 843 | [ 17.830784] systemd[1]: Listening on fsck to fsckd communication Socket. |
| 844 | [ 17.834575] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| 845 | [ 17.838507] systemd[1]: Listening on Journal Audit Socket. |
| 846 | [ 17.842289] systemd[1]: Listening on Journal Socket (/dev/log). |
| 847 | [ 17.846132] systemd[1]: Listening on Journal Socket. |
| 848 | [ 17.849939] systemd[1]: Listening on udev Control Socket. |
| 849 | [ 17.853688] systemd[1]: Listening on udev Kernel Socket. |
| 850 | [ 17.858230] systemd[1]: Mounting Huge Pages File System... |
| 851 | [ 17.862169] systemd[1]: Mounting POSIX Message Queue File System... |
| 852 | [ 17.866113] systemd[1]: Mounting Kernel Debug File System... |
| 853 | [ 17.870050] systemd[1]: Starting Availability of block devices... |
| 854 | [ 17.874000] systemd[1]: Starting Set the console keyboard layout... |
| 855 | [ 17.877990] systemd[1]: Starting Create list of static device nodes for the current kernel... |
| 856 | [ 17.882507] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... |
| 857 | [ 17.886444] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. |
| 858 | [ 17.886494] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. |
| 859 | [ 17.888148] systemd[1]: Starting Journal Service... |
| 860 | [ 17.900431] systemd[1]: Starting Load Kernel Modules... |
| 861 | [ 17.907160] systemd[1]: Starting Remount Root and Kernel File Systems... |
| 862 | [ 17.910161] systemd[1]: Starting udev Coldplug all Devices... |
| 863 | [ 17.918278] systemd[1]: Mounted Huge Pages File System. |
| 864 | [ 17.920912] systemd[1]: Mounted POSIX Message Queue File System. |
| 865 | [ 17.923081] systemd[1]: Mounted Kernel Debug File System. |
| 866 | [ 17.925587] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| 867 | [ 17.931517] systemd[1]: Started Availability of block devices. |
| 868 | [ 17.934618] systemd[1]: Started Set the console keyboard layout. |
| 869 | [ 17.938998] systemd[1]: Started Create list of static device nodes for the current kernel. |
| 870 | [ 17.943400] systemd[1]: Started Remount Root and Kernel File Systems. |
| 871 | [ 17.948790] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. |
| 872 | [ 17.949908] systemd[1]: Starting Load/Save Random Seed... |
| 873 | [ 17.956163] systemd[1]: Starting Create System Users... |
| 874 | [ 17.960418] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. |
| 875 | [ 17.977609] systemd[1]: Started Load/Save Random Seed. |
| 876 | [ 17.990459] systemd[1]: Started Create System Users. |
| 877 | [ 17.993698] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 878 | [ 18.022169] systemd[1]: Started Create Static Device Nodes in /dev. |
| 879 | [ 18.024972] systemd[1]: Started udev Coldplug all Devices. |
| 880 | [ 18.027438] systemd[1]: Reached target Local File Systems (Pre). |
| 881 | [ 18.035224] systemd[1]: Mounting Mount unit for core18, revision 1279... |
| 882 | [ 18.039650] systemd[1]: Mounting Mount unit for core18, revision 1288... |
| 883 | [ 18.043438] systemd[1]: Mounting Mount unit for sdlpop, revision 211... |
| 884 | [ 18.046209] systemd[1]: Mounting Mount unit for snapd, revision 5643... |
| 885 | [ 18.051774] systemd[1]: Mounting Mount unit for snapd, revision 5754... |
| 886 | [ 18.055305] systemd[1]: Starting Helper to synchronize boot up for ifupdown... |
| 887 | [ 18.058529] systemd[1]: Starting udev Kernel Device Manager... |
| 888 | [ 18.062757] systemd[1]: Started Helper to synchronize boot up for ifupdown. |
| 889 | [ 18.080558] loop: module loaded |
| 890 | [ 18.093384] lp: driver loaded but no devices found |
| 891 | [ 18.097939] ppdev: user-space parallel port driver |
| 892 | [ 18.107790] systemd[1]: Started Load Kernel Modules. |
| 893 | [ 18.110173] systemd[1]: Condition check resulted in FUSE Control File System being skipped. |
| 894 | [ 18.110267] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. |
| 895 | [ 18.111324] systemd[1]: Starting Apply Kernel Variables... |
| 896 | [ 18.114113] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| 897 | [ 18.126376] systemd[1]: Started Apply Kernel Variables. |
| 898 | [ 18.157095] systemd[1]: Mounted Mount unit for core18, revision 1279. |
| 899 | [ 18.172991] systemd[1]: Mounted Mount unit for sdlpop, revision 211. |
| 900 | [ 18.175263] systemd[1]: Mounted Mount unit for core18, revision 1288. |
| 901 | [ 18.180794] systemd[1]: Mounted Mount unit for snapd, revision 5643. |
| 902 | [ 18.183512] systemd[1]: Mounted Mount unit for snapd, revision 5754. |
| 903 | [ 18.214181] systemd[1]: Started udev Kernel Device Manager. |
| 904 | [ 18.217619] systemd[1]: Starting Show Plymouth Boot Screen... |
| 905 | [ 18.243524] systemd[1]: plymouth-start.service: Succeeded. |
| 906 | [ 18.246082] systemd[1]: Started Show Plymouth Boot Screen. |
| 907 | [ 18.248276] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. |
| 908 | [ 18.251129] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. |
| 909 | [ 18.343018] systemd[1]: Started Journal Service. |
| 910 | [ 18.356006] systemd-journald[499]: Received client request to flush runtime journal. |
| 911 | [ 18.418327] ACPI: AC Adapter [AC] (on-line) |
| 912 | [ 18.440165] Non-volatile memory driver v1.3 |
| 913 | [ 18.444424] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| 914 | [ 18.507957] iTCO_vendor_support: vendor-support=0 |
| 915 | [ 18.513796] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| 916 | [ 18.513797] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| 917 | [ 18.513798] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-630-g536799d5f6, EC G7HT39WW-3.22 |
| 918 | [ 18.513798] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| 919 | [ 18.521605] thinkpad_acpi: radio switch found; radios are enabled |
| 920 | [ 18.535562] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| 921 | [ 18.537743] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| 922 | [ 18.539753] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| 923 | [ 18.543422] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| 924 | [ 18.546289] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| 925 | [ 18.555520] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| 926 | [ 18.558418] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| 927 | [ 18.562003] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| 928 | [ 18.562010] battery: new extension: ThinkPad Battery Extension |
| 929 | [ 18.566141] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input24 |
| 930 | [ 18.569360] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 931 | [ 18.575808] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| 932 | [ 18.576055] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| 933 | [ 18.580830] input: PC Speaker as /devices/platform/pcspkr/input/input25 |
| 934 | [ 18.580860] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| 935 | [ 18.582911] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| 936 | [ 18.587993] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 937 | [ 18.592157] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| 938 | [ 18.594165] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| 939 | [ 18.596061] RAPL PMU: hw unit of domain package 2^-16 Joules |
| 940 | [ 18.597921] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| 941 | [ 18.767626] wl: loading out-of-tree module taints kernel. |
| 942 | [ 18.767909] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| 943 | [ 18.769607] wl: module license 'MIXED/Proprietary' taints kernel. |
| 944 | [ 18.773521] Disabling lock debugging due to kernel taint |
| 945 | [ 18.781813] wl: module verification failed: signature and/or required key missing - tainting kernel |
| 946 | [ 18.800489] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| 947 | [ 18.802555] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 948 | [ 18.802558] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| 949 | [ 18.806556] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| 950 | [ 18.806557] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| 951 | [ 18.807488] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| 952 | |
| 953 | [ 18.807668] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| 954 | [ 18.807670] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| 955 | [ 18.807672] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| 956 | [ 18.852346] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| 957 | [ 18.854578] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| 958 | [ 18.856957] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| 959 | [ 18.859064] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 |
| 960 | [ 18.861498] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30 |
| 961 | [ 18.863896] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31 |
| 962 | [ 18.866093] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32 |
| 963 | [ 18.868188] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33 |
| 964 | [ 18.976593] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| 965 | [ 19.029515] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| 966 | [ 19.033411] intel_rapl_common: Found RAPL domain package |
| 967 | [ 19.033412] intel_rapl_common: Found RAPL domain core |
| 968 | [ 19.033413] intel_rapl_common: Found RAPL domain uncore |
| 969 | [ 19.275559] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| 970 | [ 19.282098] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| 971 | [ 19.283935] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) |
| 972 | [ 19.402764] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| 973 | [ 19.455658] audit: type=1400 audit(1577709039.623:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1246 comm="apparmor_parser" |
| 974 | [ 19.457575] audit: type=1400 audit(1577709039.623:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1246 comm="apparmor_parser" |
| 975 | [ 19.459505] audit: type=1400 audit(1577709039.623:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1246 comm="apparmor_parser" |
| 976 | [ 19.462943] audit: type=1400 audit(1577709039.635:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1248 comm="apparmor_parser" |
| 977 | [ 19.465976] audit: type=1400 audit(1577709039.639:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1247 comm="apparmor_parser" |
| 978 | [ 19.469233] audit: type=1400 audit(1577709039.639:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1245 comm="apparmor_parser" |
| 979 | [ 19.474667] audit: type=1400 audit(1577709039.643:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1253 comm="apparmor_parser" |
| 980 | [ 19.474735] audit: type=1400 audit(1577709039.643:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1249 comm="apparmor_parser" |
| 981 | [ 19.474737] audit: type=1400 audit(1577709039.643:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1249 comm="apparmor_parser" |
| 982 | [ 19.475522] audit: type=1400 audit(1577709039.643:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1250 comm="apparmor_parser" |
| 983 | [ 19.590704] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input34 |
| 984 | [ 19.712985] Process accounting resumed |
| 985 | [ 20.688054] vboxdrv: Found 4 processor cores |
| 986 | [ 20.724474] vboxdrv: TSC mode is Invariant, tentative frequency 2893425457 Hz |
| 987 | [ 20.725830] vboxdrv: Successfully loaded version 6.1.0_Debian (interface 0x002d0001) |
| 988 | [ 20.949589] VBoxNetFlt: Successfully started. |
| 989 | [ 20.957437] VBoxNetAdp: Successfully started. |
| 990 | [ 21.129082] mc: Linux media interface: v0.10 |
| 991 | [ 21.185768] videodev: Linux video capture interface: v2.00 |
| 992 | [ 21.256164] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| 993 | [ 21.309610] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| 994 | [ 21.327074] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| 995 | [ 21.328547] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| 996 | [ 21.329907] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| 997 | [ 21.331274] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| 998 | [ 21.332719] Bluetooth: Core ver 2.22 |
| 999 | [ 21.332765] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35 |
| 1000 | [ 21.334041] NET: Registered protocol family 31 |
| 1001 | [ 21.335893] usbcore: registered new interface driver uvcvideo |
| 1002 | [ 21.336799] Bluetooth: HCI device and connection manager initialized |
| 1003 | [ 21.338165] USB Video Class driver (1.1.1) |
| 1004 | [ 21.346543] Bluetooth: HCI socket layer initialized |
| 1005 | [ 21.347677] Bluetooth: L2CAP socket layer initialized |
| 1006 | [ 21.349148] Bluetooth: SCO socket layer initialized |
| 1007 | [ 21.364902] usbcore: registered new interface driver btusb |
| 1008 | [ 21.423680] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 1009 | [ 21.425243] Bluetooth: BNEP filters: protocol multicast |
| 1010 | [ 21.426424] Bluetooth: BNEP socket layer initialized |
| 1011 | [ 21.482845] Bluetooth: hci0: BCM: chip id 63 |
| 1012 | [ 21.485840] Bluetooth: hci0: BCM: features 0x07 |
| 1013 | [ 21.503856] Bluetooth: hci0: TP-T430s |
| 1014 | [ 21.506858] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| 1015 | [ 21.513351] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| 1016 | [ 22.402843] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| 1017 | [ 22.418849] Bluetooth: hci0: Broadcom Bluetooth Device |
| 1018 | [ 22.685980] Bluetooth: RFCOMM TTY layer initialized |
| 1019 | [ 22.685988] Bluetooth: RFCOMM socket layer initialized |
| 1020 | [ 22.685994] Bluetooth: RFCOMM ver 1.11 |
| 1021 | [ 23.156002] usblp 4-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| 1022 | [ 23.157470] usbcore: registered new interface driver usblp |
| 1023 | [ 23.222400] usbcore: registered new interface driver usbserial_generic |
| 1024 | [ 23.224603] usbserial: USB Serial support registered for generic |
| 1025 | [ 23.232819] usbcore: registered new interface driver pl2303 |
| 1026 | [ 23.234855] usbserial: USB Serial support registered for pl2303 |
| 1027 | [ 23.236222] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| 1028 | [ 23.245465] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| 1029 | [ 25.577088] rfkill: input handler disabled |
| 1030 | [ 27.146078] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| 1031 | [ 27.146124] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| 1032 | [ 27.612140] kauditd_printk_skb: 32 callbacks suppressed |
| 1033 | [ 27.612141] audit: type=1400 audit(1577709047.779:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2991 comm="apparmor_parser" |
| 1034 | [ 27.772637] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| 1035 | [ 27.774618] Bridge firewalling registered |
| 1036 | [ 28.050311] Initializing XFRM netlink socket |
| 1037 | [ 32.131993] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected. |
| 1038 | [ 32.969985] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| 1039 | [ 43.664502] rfkill: input handler enabled |
| 1040 | [ 49.552873] rfkill: input handler disabled |