Sevan Janiyan | 98c5c1a | 2014-08-16 00:01:43 +0100 | [diff] [blame] | 1 | [ 0.030013] smpboot: SMP motherboard not detected |
| 2 | [ 0.031012] smpboot: Local APIC not detected. Using dummy APIC emulation. |
| 3 | [ 0.032010] smpboot: SMP disabled |
| 4 | [ 0.033011] Performance Events: no PMU driver, software events only. |
| 5 | [ 0.036493] Brought up 1 CPUs |
| 6 | [ 0.037018] smpboot: Total of 1 processors activated (996.14 BogoMIPS) |
| 7 | [ 0.039790] devtmpfs: initialized |
| 8 | [ 0.042398] NET: Registered protocol family 16 |
| 9 | [ 0.047365] PCI: PCI BIOS revision 2.10 entry at 0xfd4b7, last bus=0 |
| 10 | [ 0.048014] PCI: Using configuration type 1 for base access |
| 11 | [ 0.068549] bio: create slab <bio-0> at 0 |
| 12 | [ 0.070201] ACPI: Interpreter disabled. |
| 13 | [ 0.072369] vgaarb: loaded |
| 14 | [ 0.074402] SCSI subsystem initialized |
| 15 | [ 0.076606] PCI: Probing PCI hardware |
| 16 | [ 0.077042] PCI: root bus 00: using default resources |
| 17 | [ 0.077057] PCI: Probing PCI hardware (bus 00) |
| 18 | [ 0.077296] PCI host bridge to bus 0000:00 |
| 19 | [ 0.078052] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] |
| 20 | [ 0.079023] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] |
| 21 | [ 0.080034] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] |
| 22 | [ 0.081212] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000 |
| 23 | [ 0.081355] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f] |
| 24 | [ 0.082384] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000 |
| 25 | [ 0.082631] pci 0000:00:01.2: reg 10: [mem 0xfe020000-0xfe023fff] |
| 26 | [ 0.083930] pci 0000:00:09.0: [1106:3053] type 00 class 0x020000 |
| 27 | [ 0.083974] pci 0000:00:09.0: reg 10: [io 0x1000-0x10ff] |
| 28 | [ 0.084047] pci 0000:00:09.0: reg 14: [mem 0xfe029000-0xfe0290ff] |
| 29 | [ 0.084158] pci 0000:00:09.0: supports D1 D2 |
| 30 | [ 0.084181] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 31 | [ 0.084251] pci 0000:00:0a.0: [1106:3053] type 00 class 0x020000 |
| 32 | [ 0.084294] pci 0000:00:0a.0: reg 10: [io 0x1400-0x14ff] |
| 33 | [ 0.084328] pci 0000:00:0a.0: reg 14: [mem 0xfe029100-0xfe0291ff] |
| 34 | [ 0.084437] pci 0000:00:0a.0: supports D1 D2 |
| 35 | [ 0.084459] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 36 | [ 0.084516] pci 0000:00:0b.0: [1106:3053] type 00 class 0x020000 |
| 37 | [ 0.084559] pci 0000:00:0b.0: reg 10: [io 0x1800-0x18ff] |
| 38 | [ 0.084593] pci 0000:00:0b.0: reg 14: [mem 0xfe029200-0xfe0292ff] |
| 39 | [ 0.084702] pci 0000:00:0b.0: supports D1 D2 |
| 40 | [ 0.084723] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 41 | [ 0.084785] pci 0000:00:0c.0: [168c:1014] type 00 class 0x020000 |
| 42 | [ 0.084829] pci 0000:00:0c.0: reg 10: [mem 0xfe000000-0xfe00ffff] |
| 43 | [ 0.085099] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100 |
| 44 | [ 0.085415] pci 0000:00:0f.0: reg 10: [io 0x24b0-0x24b7] |
| 45 | [ 0.085680] pci 0000:00:0f.0: reg 14: [io 0x1c00-0x1cff] |
| 46 | [ 0.085946] pci 0000:00:0f.0: reg 18: [io 0x2400-0x243f] |
| 47 | [ 0.086249] pci 0000:00:0f.0: reg 1c: [io 0x2480-0x249f] |
| 48 | [ 0.086520] pci 0000:00:0f.0: reg 20: [io 0x2000-0x207f] |
| 49 | [ 0.086804] pci 0000:00:0f.0: reg 24: [io 0x2440-0x247f] |
| 50 | [ 0.087406] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180 |
| 51 | [ 0.088324] pci 0000:00:0f.2: reg 20: [io 0x24a0-0x24af] |
| 52 | [ 0.089098] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310 |
| 53 | [ 0.089446] pci 0000:00:0f.4: reg 10: [mem 0xfe026000-0xfe026fff] |
| 54 | [ 0.090983] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold |
| 55 | [ 0.091328] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320 |
| 56 | [ 0.091669] pci 0000:00:0f.5: reg 10: [mem 0xfe027000-0xfe027fff] |
| 57 | [ 0.093214] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold |
| 58 | [ 0.093452] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 |
| 59 | [ 0.096681] PCI: pci_cache_line_size set to 32 bytes |
| 60 | [ 0.097072] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 61 | [ 0.097089] e820: reserve RAM buffer [mem 0x0f7b0000-0x0fffffff] |
| 62 | [ 0.098308] Switching to clocksource pit |
| 63 | [ 0.099485] pnp: PnP ACPI: disabled |
| 64 | [ 0.120842] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] |
| 65 | [ 0.120961] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] |
| 66 | [ 0.121108] NET: Registered protocol family 2 |
| 67 | [ 0.123046] TCP established hash table entries: 2048 (order: 2, 16384 bytes) |
| 68 | [ 0.124351] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) |
| 69 | [ 0.125759] TCP: Hash tables configured (established 2048 bind 2048) |
| 70 | [ 0.126985] TCP: reno registered |
| 71 | [ 0.128712] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| 72 | [ 0.129240] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| 73 | [ 0.130311] NET: Registered protocol family 1 |
| 74 | [ 0.131783] RPC: Registered named UNIX socket transport module. |
| 75 | [ 0.132566] RPC: Registered udp transport module. |
| 76 | [ 0.133693] RPC: Registered tcp transport module. |
| 77 | [ 0.134811] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 78 | [ 0.135763] PCI: CLS 64 bytes, default 32 |
| 79 | [ 0.136050] Trying to unpack rootfs image as initramfs... |
| 80 | [ 1.321930] Freeing initrd memory: 6152k freed |
| 81 | [ 1.330423] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 82 | [ 1.332807] microcode: AMD CPU family 0x5 not supported |
| 83 | [ 1.352496] NFS: Registering the id_resolver key type |
| 84 | [ 1.353802] Key type id_resolver registered |
| 85 | [ 1.355465] Key type id_legacy registered |
| 86 | [ 1.356587] msgmni has been set to 480 |
| 87 | [ 1.358199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) |
| 88 | [ 1.359403] io scheduler noop registered |
| 89 | [ 1.360189] io scheduler deadline registered |
| 90 | [ 1.361036] io scheduler cfq registered (default) |
| 91 | [ 1.496627] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 92 | [ 1.498084] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A |
| 93 | [ 1.500151] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A |
| 94 | [ 1.503176] Linux agpgart interface v0.103 |
| 95 | [ 1.517891] brd: module loaded |
| 96 | [ 1.519261] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278) |
| 97 | [ 1.522245] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278) |
| 98 | [ 1.525212] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1c00-0x1cff] |
| 99 | [ 1.526972] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278) |
| 100 | [ 1.529917] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278) |
| 101 | [ 1.533905] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278) |
| 102 | [ 1.537883] cs5535-mfd 0000:00:0f.0: 5 devices registered. |
| 103 | [ 1.539564] Uniform Multi-Platform E-IDE driver |
| 104 | [ 1.540590] ide-gd driver 1.18 |
| 105 | [ 1.542086] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| 106 | [ 1.546178] i8042: No controller found |
| 107 | [ 1.548095] mousedev: PS/2 mouse device common for all mice |
| 108 | [ 1.549388] cpuidle: using governor ladder |
| 109 | [ 1.549703] cpuidle: using governor menu |
| 110 | [ 1.552930] TCP: cubic registered |
| 111 | [ 1.553910] NET: Registered protocol family 17 |
| 112 | [ 1.555435] Key type dns_resolver registered |
| 113 | [ 1.556369] Using IPI No-Shortcut mode |
| 114 | [ 1.560543] Freeing unused kernel memory: 404k freed |
| 115 | [ 1.562304] Write protecting the kernel text: 2920k |
| 116 | [ 1.563086] Write protecting the kernel read-only data: 964k |
| 117 | [ 1.633105] udevd[900]: starting version 175 |
| 118 | [ 1.831504] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker |
| 119 | [ 1.876356] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management Adapter) at 0xfe029000, 00:0d:b9:15:6b:e0, IRQ 10 |
| 120 | [ 1.877708] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1 |
| 121 | [ 1.899687] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) at 0xfe029100, 00:0d:b9:15:6b:e1, IRQ 11 |
| 122 | [ 1.902032] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000 |
| 123 | [ 1.938725] amd74xx 0000:00:0f.2: UDMA100 controller |
| 124 | [ 1.939667] amd74xx 0000:00:0f.2: IDE controller (0x1022:0x209a rev 0x01) |
| 125 | [ 1.941187] amd74xx 0000:00:0f.2: IDE port disabled |
| 126 | [ 1.941987] amd74xx 0000:00:0f.2: not 100% native mode: will probe irqs later |
| 127 | [ 1.943525] ide0: BM-DMA at 0x24a0-0x24a7 |
| 128 | [ 1.943618] Probing IDE interface ide0... |
| 129 | [ 1.982216] usbcore: registered new interface driver usbfs |
| 130 | [ 1.997778] usbcore: registered new interface driver hub |
| 131 | [ 2.009781] usbcore: registered new device driver usb |
| 132 | [ 2.050872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 133 | [ 2.112723] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 134 | [ 2.252847] hda: HMS360404D5CF00, CFA DISK drive |
| 135 | [ 2.331615] Switching to clocksource tsc |
| 136 | [ 2.866607] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 |
| 137 | [ 3.527326] hda: UDMA/33 mode selected |
| 138 | [ 3.577206] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
| 139 | [ 3.638015] hda: max request size: 128KiB |
| 140 | [ 3.650071] hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63 |
| 141 | [ 3.817826] hda: cache flushes supported |
| 142 | [ 3.839594] hda: hda1 |
| 143 | [ 3.857913] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management Adapter) at 0xfe029200, 00:0d:b9:15:6b:e2, IRQ 9 |
| 144 | [ 3.890009] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000 |
| 145 | [ 3.920018] ohci_hcd 0000:00:0f.4: setting latency timer to 64 |
| 146 | [ 3.920062] ohci_hcd 0000:00:0f.4: OHCI Host Controller |
| 147 | [ 3.947528] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1 |
| 148 | [ 3.969806] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xfe026000 |
| 149 | [ 4.015215] Clocksource tsc unstable (delta = 183941627 ns) |
| 150 | [ 4.032041] Switching to clocksource pit |
| 151 | [ 4.095359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 |
| 152 | [ 4.096734] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 153 | [ 4.097410] usb usb1: Product: OHCI Host Controller |
| 154 | [ 4.099076] usb usb1: Manufacturer: Linux 3.8.11-voyage ohci_hcd |
| 155 | [ 4.100116] usb usb1: SerialNumber: 0000:00:0f.4 |
| 156 | [ 4.102146] hub 1-0:1.0: USB hub found |
| 157 | [ 4.102476] hub 1-0:1.0: 4 ports detected |
| 158 | [ 4.123812] libata version 3.00 loaded. |
| 159 | [ 10.048823] udevd[1128]: starting version 175 |
| 160 | [ 10.735994] AMD Geode RNG detected |
| 161 | [ 10.855341] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x2400-0x243f] |
| 162 | [ 10.856409] cs5535-mfgpt cs5535-mfgpt: 2 MFGPT timers available |
| 163 | [ 10.938272] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered |
| 164 | [ 11.133227] geode-aes: GEODE AES engine enabled. |
| 165 | [ 11.136133] ehci-pci: EHCI PCI platform driver |
| 166 | [ 11.139359] ehci-pci 0000:00:0f.5: setting latency timer to 64 |
| 167 | [ 11.139408] ehci-pci 0000:00:0f.5: EHCI Host Controller |
| 168 | [ 11.146374] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 2 |
| 169 | [ 11.154596] ehci-pci 0000:00:0f.5: cache line size of 64 is not supported |
| 170 | [ 11.154651] ehci-pci 0000:00:0f.5: irq 9, io mem 0xfe027000 |
| 171 | [ 11.166797] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00 |
| 172 | [ 11.168234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 173 | [ 11.169733] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 174 | [ 11.170416] usb usb2: Product: EHCI Host Controller |
| 175 | [ 11.172115] usb usb2: Manufacturer: Linux 3.8.11-voyage ehci_hcd |
| 176 | [ 11.173144] usb usb2: SerialNumber: 0000:00:0f.5 |
| 177 | [ 11.186958] hub 2-0:1.0: USB hub found |
| 178 | [ 11.191933] hub 2-0:1.0: 4 ports detected |
| 179 | [ 11.272629] input: PC Speaker as /devices/platform/pcspkr/input/input0 |
| 180 | [ 11.764744] cfg80211: Calling CRDA to update world regulatory domain |
| 181 | [ 12.915269] Error: Driver 'pcspkr' is already registered, aborting... |
| 182 | [ 12.960770] ath5k 0000:00:0c.0: registered as 'phy0' |
| 183 | [ 14.022768] cfg80211: World regulatory domain updated: |
| 184 | [ 14.024231] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) |
| 185 | [ 14.024765] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 186 | [ 14.026008] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 187 | [ 14.027250] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 188 | [ 14.028492] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 189 | [ 14.028739] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 190 | [ 14.059709] ath: EEPROM regdomain: 0x61 |
| 191 | [ 14.059725] ath: EEPROM indicates we should expect a direct regpair map |
| 192 | [ 14.059750] ath: Country alpha2 being used: 00 |
| 193 | [ 14.059763] ath: Regpair used: 0x61 |
| 194 | [ 14.151466] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 195 | [ 14.152993] ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) |
| 196 | [ 14.154380] ath5k: phy0: RF5111 5GHz radio found (0x17) |
| 197 | [ 14.155076] ath5k: phy0: RF2111 2GHz radio found (0x23) |
| 198 | [ 15.160212] EXT2-fs (hda1): warning: mounting unchecked fs, running e2fsck is recommended |
| 199 | [ 15.988988] cs5535-mfgpt cs5535-mfgpt: registered timer 0 |
| 200 | [ 23.079235] NET: Registered protocol family 10 |
| 201 | [ 87.700578] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| 202 | [ 111.290164] EXT2-fs (hda1): warning: mounting unchecked fs, running e2fsck is recommended |