Sam Lewis | c82d193 | 2019-04-06 14:38:27 -0400 | [diff] [blame] | 1 | *** Pre-CBMEM romstage console overflowed, log truncated! *** |
| 2 | Found compatible clock, CAS pair. |
| 3 | Selected DRAM frequency: 666 MHz |
| 4 | Selected CAS latency : 9T |
| 5 | PLL busy... done in 70 us |
| 6 | MCU frequency is set at : 666 MHz |
| 7 | Done dimm mapping |
| 8 | Update PCI-E configuration space: |
| 9 | PCI(0, 0, 0)[a0] = 0 |
| 10 | PCI(0, 0, 0)[a4] = 2 |
| 11 | PCI(0, 0, 0)[bc] = 82a00000 |
| 12 | PCI(0, 0, 0)[a8] = 7b600000 |
| 13 | PCI(0, 0, 0)[ac] = 2 |
| 14 | PCI(0, 0, 0)[b8] = 80000000 |
| 15 | PCI(0, 0, 0)[b0] = 80a00000 |
| 16 | PCI(0, 0, 0)[b4] = 80800000 |
| 17 | PCI(0, 0, 0)[7c] = 7f |
| 18 | PCI(0, 0, 0)[70] = fe000000 |
| 19 | PCI(0, 0, 0)[74] = 1 |
| 20 | PCI(0, 0, 0)[78] = fe000c00 |
| 21 | Done memory map |
| 22 | Done io registers |
| 23 | t123: 1912, 9120, 500 |
| 24 | ME: FW Partition Table : OK |
| 25 | ME: Bringup Loader Failure : NO |
| 26 | ME: Firmware Init Complete : YES |
| 27 | ME: Manufacturing Mode : NO |
| 28 | ME: Boot Options Present : NO |
| 29 | ME: Update In Progress : NO |
| 30 | ME: Current Working State : Normal |
| 31 | ME: Current Operation State : M0 without UMA |
| 32 | ME: Current Operation Mode : Normal |
| 33 | ME: Error Code : No Error |
| 34 | ME: Progress Phase : Policy Module |
| 35 | ME: Power Management Event : Non-power cycle reset |
| 36 | ME: Progress Phase State : Entery into Policy Module |
| 37 | ME: FWS2: 0x39000006 |
| 38 | ME: Bist in progress: 0x0 |
| 39 | ME: ICC Status : 0x3 |
| 40 | ME: Invoke MEBx : 0x0 |
| 41 | ME: CPU replaced : 0x0 |
| 42 | ME: MBP ready : 0x0 |
| 43 | ME: MFS failure : 0x0 |
| 44 | ME: Warm reset req : 0x0 |
| 45 | ME: CPU repl valid : 0x0 |
| 46 | ME: (Reserved) : 0x0 |
| 47 | ME: FW update req : 0x0 |
| 48 | ME: (Reserved) : 0x0 |
| 49 | ME: Current state : 0x0 |
| 50 | ME: Current PM event: 0x9 |
| 51 | ME: Progress code : 0x3 |
| 52 | Waited long enough, or CPU was not replaced, continue... |
| 53 | PASSED! Tell ME that DRAM is ready |
| 54 | ME: FWS2: 0x390b0006 |
| 55 | ME: Bist in progress: 0x0 |
| 56 | ME: ICC Status : 0x3 |
| 57 | ME: Invoke MEBx : 0x0 |
| 58 | ME: CPU replaced : 0x0 |
| 59 | ME: MBP ready : 0x0 |
| 60 | ME: MFS failure : 0x0 |
| 61 | ME: Warm reset req : 0x0 |
| 62 | ME: CPU repl valid : 0x0 |
| 63 | ME: (Reserved) : 0x0 |
| 64 | ME: FW update req : 0x0 |
| 65 | ME: (Reserved) : 0x0 |
| 66 | ME: Current state : 0xb |
| 67 | ME: Current PM event: 0x9 |
| 68 | ME: Progress code : 0x3 |
| 69 | ME: Requested BIOS Action: Continue to boot |
| 70 | ME: FW Partition Table : OK |
| 71 | ME: Bringup Loader Failure : NO |
| 72 | ME: Firmware Init Complete : YES |
| 73 | ME: Manufacturing Mode : NO |
| 74 | ME: Boot Options Present : NO |
| 75 | ME: Update In Progress : NO |
| 76 | ME: Current Working State : Normal |
| 77 | ME: Current Operation State : M0 without UMA |
| 78 | ME: Current Operation Mode : Normal |
| 79 | ME: Error Code : No Error |
| 80 | ME: Progress Phase : Policy Module |
| 81 | ME: Power Management Event : Non-power cycle reset |
| 82 | ME: Progress Phase State : Received DRAM Init Done |
| 83 | memcfg DDR3 ref clock 133 MHz |
| 84 | memcfg DDR3 clock 1330 MHz |
| 85 | memcfg channel assignment: A: 0, B 1, C 2 |
| 86 | memcfg channel[0] config (00620010): |
| 87 | ECC inactive |
| 88 | enhanced interleave mode on |
| 89 | rank interleave on |
| 90 | DIMMA 4096 MB width x8 dual rank, selected |
| 91 | DIMMB 0 MB width x8 single rank |
| 92 | memcfg channel[1] config (00620010): |
| 93 | ECC inactive |
| 94 | enhanced interleave mode on |
| 95 | rank interleave on |
| 96 | DIMMA 4096 MB width x8 dual rank, selected |
| 97 | DIMMB 0 MB width x8 single rank |
| 98 | CBMEM: |
| 99 | IMD: root @ 7ffff000 254 entries. |
| 100 | IMD: root @ 7fffec00 62 entries. |
| 101 | External stage cache: |
| 102 | IMD: root @ 803ff000 254 entries. |
| 103 | IMD: root @ 803fec00 62 entries. |
| 104 | CBMEM entry for DIMM info: 0x7fffea40 |
| 105 | MTRR Range: Start=ff800000 End=0 (Size 800000) |
| 106 | MTRR Range: Start=0 End=1000000 (Size 1000000) |
| 107 | MTRR Range: Start=7f800000 End=80000000 (Size 800000) |
| 108 | MTRR Range: Start=80000000 End=80800000 (Size 800000) |
| 109 | CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| 110 | CBFS: Locating 'fallback/postcar' |
| 111 | CBFS: Found @ offset 3c2c0 size 3c28 |
| 112 | Decompressing stage fallback/postcar @ 0x7ffcffc0 (32016 bytes) |
| 113 | Loading module at 7ffd0000 with entry 7ffd0000. filesize: 0x3a10 memsize: 0x7cd0 |
| 114 | Processing 111 relocs. Offset value of 0x7dfd0000 |
| 115 | |
| 116 | |
| 117 | coreboot-4.9-1236-g2452c8414d Sat Apr 6 13:47:29 UTC 2019 postcar starting (log level: 7)... |
| 118 | CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| 119 | CBFS: Locating 'fallback/ramstage' |
| 120 | CBFS: Found @ offset 19d80 size 1a5d2 |
| 121 | Decompressing stage fallback/ramstage @ 0x7ff82fc0 (310520 bytes) |
| 122 | Loading module at 7ff83000 with entry 7ff83000. filesize: 0x36e10 memsize: 0x4bcb8 |
| 123 | Processing 3642 relocs. Offset value of 0x7f183000 |
| 124 | |
| 125 | |
| 126 | coreboot-4.9-1236-g2452c8414d Sat Apr 6 13:47:29 UTC 2019 ramstage starting (log level: 7)... |
| 127 | Normal boot. |
| 128 | BS: BS_PRE_DEVICE times (us): entry 0 run 2 exit 0 |
| 129 | BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 3 exit 0 |
| 130 | Enumerating buses... |
| 131 | CPU_CLUSTER: 0 enabled |
| 132 | DOMAIN: 0000 enabled |
| 133 | PCI: pci_scan_bus for bus 00 |
| 134 | PCI: 00:00.0 [8086/0104] enabled |
| 135 | PCI: Static device PCI: 00:01.0 not found, disabling it. |
| 136 | PCI: 00:02.0 [8086/0126] enabled |
| 137 | PCI: 00:04.0 [8086/0103] enabled |
| 138 | PCI: 00:16.0: Disabling device |
| 139 | PCI: 00:16.0 [8086/1c3a] disabled |
| 140 | PCI: 00:16.1: Disabling device |
| 141 | PCI: 00:16.2: Disabling device |
| 142 | PCI: 00:16.3: Disabling device |
| 143 | PCI: 00:19.0 [8086/1502] enabled |
| 144 | PCI: 00:1a.0 [8086/1c2d] enabled |
| 145 | PCI: 00:1b.0 [8086/1c20] enabled |
| 146 | PCH: PCIe Root Port coalescing is enabled |
| 147 | PCI: 00:1c.0: Disabling device |
| 148 | PCI: 00:1c.0: check set enabled |
| 149 | PCI: 00:1c.0 [8086/1c10] disabled |
| 150 | PCH: Remap PCIe function 1 to 0 |
| 151 | PCI: 00:1c.1 [8086/1c12] enabled |
| 152 | PCI: 00:1c.2: Disabling device |
| 153 | PCH: Remap PCIe function 3 to 0 |
| 154 | PCI: 00:1c.3 [8086/1c16] enabled |
| 155 | PCI: 00:1c.4: Disabling device |
| 156 | PCI: 00:1c.4: check set enabled |
| 157 | PCI: 00:1c.5: Disabling device |
| 158 | PCH: Remap PCIe function 6 to 0 |
| 159 | PCI: 00:1c.6 [8086/1c1c] enabled |
| 160 | PCI: 00:1c.7: Disabling device |
| 161 | PCH: PCIe map 1c.0 -> 1c.6 |
| 162 | PCH: PCIe map 1c.1 -> 1c.0 |
| 163 | PCH: PCIe map 1c.3 -> 1c.1 |
| 164 | PCH: PCIe map 1c.6 -> 1c.3 |
| 165 | PCI: 00:1d.0 [8086/1c26] enabled |
| 166 | PCI: 00:1e.0: Disabling device |
| 167 | PCI: 00:1e.0 [8086/2448] disabled |
| 168 | PCI: 00:1f.0 [8086/1c4f] enabled |
| 169 | PCI: 00:1f.2 [8086/1c01] enabled |
| 170 | PCI: 00:1f.3 [8086/1c22] enabled |
| 171 | PCI: 00:1f.5: Disabling device |
| 172 | PCI: 00:1f.5 [8086/1c09] disabled No operations |
| 173 | PCI: 00:1f.6 [8086/1c24] enabled |
| 174 | PCI: Leftover static devices: |
| 175 | PCI: 00:01.0 |
| 176 | PCI: 00:16.1 |
| 177 | PCI: 00:16.2 |
| 178 | PCI: 00:16.3 |
| 179 | PCI: 00:1c.2 |
| 180 | PCI: 00:1c.4 |
| 181 | PCI: 00:1c.5 |
| 182 | PCI: 00:1c.7 |
| 183 | PCI: Check your devicetree.cb. |
| 184 | PCI: pci_scan_bus for bus 01 |
| 185 | PCI: 01:00.0 [8086/0085] enabled |
| 186 | Enabling Common Clock Configuration |
| 187 | ASPM: Enabled L1 |
| 188 | Failed to enable LTR for dev = PCI: 01:00.0 |
| 189 | scan_bus: scanning of bus PCI: 00:1c.0 took 248 usecs |
| 190 | PCI: pci_scan_bus for bus 02 |
| 191 | PCI: 02:00.0 [1180/e823] enabled |
| 192 | Enabling Common Clock Configuration |
| 193 | ASPM: Enabled L0s and L1 |
| 194 | Failed to enable LTR for dev = PCI: 02:00.0 |
| 195 | scan_bus: scanning of bus PCI: 00:1c.1 took 230 usecs |
| 196 | PCI: pci_scan_bus for bus 03 |
| 197 | scan_bus: scanning of bus PCI: 00:1c.3 took 45 usecs |
| 198 | PMH7: ID 04 Revision 01 |
| 199 | PNP: 00ff.1 enabled |
| 200 | PNP: 0c31.0 enabled |
| 201 | EC Firmware ID 8CHT28WW-3.20, Version 1.01C |
| 202 | H8: BDC installed |
| 203 | H8: WWAN detection not implemented. Assuming WWAN installed |
| 204 | PNP: 00ff.2 enabled |
| 205 | Hybrid graphics: Switching panel to integrated GPU. |
| 206 | PNP: 00ff.f disabled |
| 207 | scan_bus: scanning of bus PCI: 00:1f.0 took 5186 usecs |
| 208 | bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled |
| 209 | bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled |
| 210 | bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled |
| 211 | bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled |
| 212 | bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled |
| 213 | bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled |
| 214 | bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled |
| 215 | bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled |
| 216 | scan_bus: scanning of bus PCI: 00:1f.3 took 26 usecs |
| 217 | scan_bus: scanning of bus DOMAIN: 0000 took 6054 usecs |
| 218 | scan_bus: scanning of bus Root Device took 6061 usecs |
| 219 | done |
| 220 | FMAP: Found "FLASH" version 1.1 at 710000. |
| 221 | FMAP: base = ff800000 size = 800000 #areas = 4 |
| 222 | FMAP: area RW_MRC_CACHE found @ 700000 (65536 bytes) |
| 223 | MRC: No data in cbmem for 'RW_MRC_CACHE'. |
| 224 | BS: BS_DEV_ENUMERATE times (us): entry 0 run 6097 exit 19 |
| 225 | found VGA at PCI: 00:02.0 |
| 226 | Setting up VGA for PCI: 00:02.0 |
| 227 | Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| 228 | Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| 229 | Allocating resources... |
| 230 | Reading resources... |
| 231 | Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000. |
| 232 | PNP: 00ff.1 missing read_resources |
| 233 | PNP: 00ff.2 missing read_resources |
| 234 | Done reading resources. |
| 235 | skipping PNP: 00ff.2@60 fixed resource, size=0! |
| 236 | skipping PNP: 00ff.2@62 fixed resource, size=0! |
| 237 | skipping PNP: 00ff.2@64 fixed resource, size=0! |
| 238 | skipping PNP: 00ff.2@66 fixed resource, size=0! |
| 239 | Setting resources... |
| 240 | TOUUD 0x27b600000 TOLUD 0x82a00000 TOM 0x200000000 |
| 241 | MEBASE 0x1fe000000 |
| 242 | IGD decoded, subtracting 32M UMA and 2M GTT |
| 243 | TSEG base 0x80000000 size 8M |
| 244 | Available memory below 4GB: 2048M |
| 245 | Available memory above 4GB: 6070M |
| 246 | PCI: 00:02.0 10 <- [0x00e1400000 - 0x00e17fffff] size 0x00400000 gran 0x16 mem64 |
| 247 | PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 |
| 248 | PCI: 00:02.0 20 <- [0x0000003000 - 0x000000303f] size 0x00000040 gran 0x06 io |
| 249 | PCI: 00:04.0 10 <- [0x00e1920000 - 0x00e1927fff] size 0x00008000 gran 0x0f mem64 |
| 250 | PCI: 00:19.0 10 <- [0x00e1900000 - 0x00e191ffff] size 0x00020000 gran 0x11 mem |
| 251 | PCI: 00:19.0 14 <- [0x00e192c000 - 0x00e192cfff] size 0x00001000 gran 0x0c mem |
| 252 | PCI: 00:19.0 18 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io |
| 253 | PCI: 00:1a.0 10 <- [0x00e192f000 - 0x00e192f3ff] size 0x00000400 gran 0x0a mem |
| 254 | PCI: 00:1b.0 10 <- [0x00e1928000 - 0x00e192bfff] size 0x00004000 gran 0x0e mem64 |
| 255 | PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| 256 | PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| 257 | PCI: 00:1c.0 20 <- [0x00e1800000 - 0x00e18fffff] size 0x00100000 gran 0x14 bus 01 mem |
| 258 | PCI: 01:00.0 10 <- [0x00e1800000 - 0x00e1801fff] size 0x00002000 gran 0x0d mem64 |
| 259 | PCI: 00:1c.1 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io |
| 260 | PCI: 00:1c.1 24 <- [0x00e0c00000 - 0x00e13fffff] size 0x00800000 gran 0x14 bus 02 prefmem |
| 261 | PCI: 00:1c.1 20 <- [0x00e0000000 - 0x00e08fffff] size 0x00900000 gran 0x14 bus 02 mem |
| 262 | PCI: 02:00.0 10 <- [0x00e0800000 - 0x00e08000ff] size 0x00000100 gran 0x08 mem |
| 263 | NONE missing set_resources |
| 264 | PCI: 00:1c.3 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io |
| 265 | PCI: 00:1c.3 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem |
| 266 | PCI: 00:1c.3 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem |
| 267 | PCI: 00:1d.0 10 <- [0x00e1930000 - 0x00e19303ff] size 0x00000400 gran 0x0a mem |
| 268 | PNP: 00ff.1 missing set_resources |
| 269 | PNP: 00ff.2 missing set_resources |
| 270 | PCI: 00:1f.2 10 <- [0x0000003080 - 0x0000003087] size 0x00000008 gran 0x03 io |
| 271 | PCI: 00:1f.2 14 <- [0x0000003090 - 0x0000003093] size 0x00000004 gran 0x02 io |
| 272 | PCI: 00:1f.2 18 <- [0x0000003088 - 0x000000308f] size 0x00000008 gran 0x03 io |
| 273 | PCI: 00:1f.2 1c <- [0x0000003094 - 0x0000003097] size 0x00000004 gran 0x02 io |
| 274 | PCI: 00:1f.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io |
| 275 | PCI: 00:1f.2 24 <- [0x00e192e000 - 0x00e192e7ff] size 0x00000800 gran 0x0b mem |
| 276 | PCI: 00:1f.3 10 <- [0x00e1931000 - 0x00e19310ff] size 0x00000100 gran 0x08 mem64 |
| 277 | PCI: 00:1f.6 10 <- [0x00e192d000 - 0x00e192dfff] size 0x00001000 gran 0x0c mem64 |
| 278 | Done setting resources. |
| 279 | Done allocating resources. |
| 280 | BS: BS_DEV_RESOURCES times (us): entry 0 run 1664 exit 0 |
| 281 | Enabling resources... |
| 282 | PCI: 00:00.0 subsystem <- 17aa/21d2 |
| 283 | PCI: 00:00.0 cmd <- 06 |
| 284 | PCI: 00:02.0 subsystem <- 17aa/21d3 |
| 285 | PCI: 00:02.0 cmd <- 03 |
| 286 | PCI: 00:04.0 cmd <- 02 |
| 287 | PCI: 00:19.0 subsystem <- 17aa/21ce |
| 288 | PCI: 00:19.0 cmd <- 103 |
| 289 | PCI: 00:1a.0 subsystem <- 17aa/21d2 |
| 290 | PCI: 00:1a.0 cmd <- 102 |
| 291 | PCI: 00:1b.0 subsystem <- 17aa/21d2 |
| 292 | PCI: 00:1b.0 cmd <- 102 |
| 293 | PCI: 00:1c.0 bridge ctrl <- 0003 |
| 294 | PCI: 00:1c.0 subsystem <- 17aa/21d2 |
| 295 | PCI: 00:1c.0 cmd <- 106 |
| 296 | PCI: 00:1c.1 bridge ctrl <- 0003 |
| 297 | PCI: 00:1c.1 subsystem <- 17aa/21d2 |
| 298 | PCI: 00:1c.1 cmd <- 107 |
| 299 | PCI: 00:1c.3 bridge ctrl <- 0003 |
| 300 | PCI: 00:1c.3 subsystem <- 17aa/21d2 |
| 301 | PCI: 00:1c.3 cmd <- 100 |
| 302 | PCI: 00:1d.0 subsystem <- 17aa/21d2 |
| 303 | PCI: 00:1d.0 cmd <- 102 |
| 304 | pch_decode_init |
| 305 | PCI: 00:1f.0 subsystem <- 17aa/21d2 |
| 306 | PCI: 00:1f.0 cmd <- 107 |
| 307 | PCI: 00:1f.2 subsystem <- 17aa/21d2 |
| 308 | PCI: 00:1f.2 cmd <- 03 |
| 309 | PCI: 00:1f.3 subsystem <- 17aa/21d2 |
| 310 | PCI: 00:1f.3 cmd <- 103 |
| 311 | PCI: 00:1f.6 subsystem <- 17aa/21d2 |
| 312 | PCI: 00:1f.6 cmd <- 02 |
| 313 | PCI: 01:00.0 cmd <- 02 |
| 314 | PCI: 02:00.0 cmd <- 06 |
| 315 | done. |
| 316 | BS: BS_DEV_ENABLE times (us): entry 0 run 324 exit 0 |
| 317 | Found TPM ST33ZP24 by ST Microelectronics |
| 318 | TPM: Startup |
| 319 | TPM: command 0x99 returned 0x0 |
| 320 | TPM: Asserting physical presence |
| 321 | TPM: command 0x4000000a returned 0x0 |
| 322 | TPM: command 0x65 returned 0x0 |
| 323 | TPM: flags disable=0, deactivated=0, nvlocked=1 |
| 324 | TPM: setup succeeded |
| 325 | Initializing devices... |
| 326 | Root Device init ... |
| 327 | Root Device init finished in 1 usecs |
| 328 | CPU_CLUSTER: 0 init ... |
| 329 | MTRR: Physical address space: |
| 330 | 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 331 | 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 332 | 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 |
| 333 | 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 |
| 334 | 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 335 | 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 336 | 0x0000000100000000 - 0x000000027b600000 size 0x17b600000 type 6 |
| 337 | MTRR: Fixed MSR 0x250 0x0606060606060606 |
| 338 | MTRR: Fixed MSR 0x258 0x0606060606060606 |
| 339 | MTRR: Fixed MSR 0x259 0x0000000000000000 |
| 340 | MTRR: Fixed MSR 0x268 0x0606060606060606 |
| 341 | MTRR: Fixed MSR 0x269 0x0606060606060606 |
| 342 | MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| 343 | MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| 344 | MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| 345 | MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| 346 | MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| 347 | MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| 348 | CPU physical address size: 36 bits |
| 349 | MTRR: default type WB/UC MTRR counts: 4/4. |
| 350 | MTRR: UC selected as default type. |
| 351 | MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 |
| 352 | MTRR: 1 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 |
| 353 | MTRR: 2 base 0x0000000100000000 mask 0x0000000f00000000 type 6 |
| 354 | MTRR: 3 base 0x0000000200000000 mask 0x0000000f80000000 type 6 |
| 355 | |
| 356 | MTRR check |
| 357 | Fixed MTRRs : Enabled |
| 358 | Variable MTRRs: Enabled |
| 359 | |
| 360 | CPU has 2 cores, 4 threads enabled. |
| 361 | Setting up SMI for CPU |
| 362 | Will perform SMM setup. |
| 363 | CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| 364 | CBFS: Locating 'cpu_microcode_blob.bin' |
| 365 | CBFS: Found @ offset 13900 size 6400 |
| 366 | microcode: sig=0x206a7 pf=0x10 revision=0x2e |
| 367 | CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz. |
| 368 | Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170 |
| 369 | Processing 16 relocs. Offset value of 0x00030000 |
| 370 | Attempting to start 3 APs |
| 371 | Waiting for 10ms after sending INIT. |
| 372 | Waiting for 1st SIPI to complete...done. |
| 373 | Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1. |
| 374 | done. |
| 375 | AP: slot 3 apic_id 3. |
| 376 | AP: slot 2 apic_id 2. |
| 377 | Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 |
| 378 | Processing 13 relocs. Offset value of 0x00038000 |
| 379 | SMM Module: stub loaded at 00038000. Will call 7ffa1776(00000000) |
| 380 | Installing SMM handler to 0x80000000 |
| 381 | Loading module at 80010000 with entry 80010112. filesize: 0x1390 memsize: 0x53b0 |
| 382 | Processing 48 relocs. Offset value of 0x80010000 |
| 383 | Loading module at 80008000 with entry 80008000. filesize: 0x1a8 memsize: 0x1a8 |
| 384 | Processing 13 relocs. Offset value of 0x80008000 |
| 385 | SMM Module: placing jmp sequence at 80007c00 rel16 0x03fd |
| 386 | SMM Module: placing jmp sequence at 80007800 rel16 0x07fd |
| 387 | SMM Module: placing jmp sequence at 80007400 rel16 0x0bfd |
| 388 | SMM Module: stub loaded at 80008000. Will call 80010112(00000000) |
| 389 | Initializing Southbridge SMI... |
| 390 | |
| 391 | New SMBASE 0x80000000 |
| 392 | In relocation handler: cpu 0 |
| 393 | New SMBASE=0x80000000 IEDBASE=0x80400000 |
| 394 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 395 | Relocation complete. |
| 396 | microcode: Update skipped, already up-to-date |
| 397 | New SMBASE 0x7ffffc00 |
| 398 | In relocation handler: cpu 1 |
| 399 | New SMBASE=0x7ffffc00 IEDBASE=0x80400000 |
| 400 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 401 | Relocation complete. |
| 402 | microcode: Update skipped, already up-to-date |
| 403 | New SMBASE 0x7ffff800 |
| 404 | In relocation handler: cpu 2 |
| 405 | New SMBASE=0x7ffff800 IEDBASE=0x80400000 |
| 406 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 407 | Relocation complete. |
| 408 | microcode: Update skipped, already up-to-date |
| 409 | New SMBASE 0x7ffff400 |
| 410 | In relocation handler: cpu 3 |
| 411 | New SMBASE=0x7ffff400 IEDBASE=0x80400000 |
| 412 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 413 | Relocation complete. |
| 414 | microcode: Update skipped, already up-to-date |
| 415 | Initializing CPU #0 |
| 416 | CPU: vendor Intel device 206a7 |
| 417 | CPU: family 06, model 2a, stepping 07 |
| 418 | Enabling cache |
| 419 | CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz. |
| 420 | CPU: platform id 4 |
| 421 | CPU: cpuid(1) 0x206a7 |
| 422 | CPU: AES supported |
| 423 | CPU: TXT supported |
| 424 | CPU: VT supported |
| 425 | Setting up local APIC... apic_id: 0x00 done. |
| 426 | IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| 427 | IA32_FEATURE_CONTROL already locked |
| 428 | model_x06ax: energy policy set to 6 |
| 429 | model_x06ax: frequency set to 2500 |
| 430 | Turbo is available but hidden |
| 431 | Turbo has been enabled |
| 432 | CPU #0 initialized |
| 433 | Initializing CPU #1 |
| 434 | Initializing CPU #3 |
| 435 | Initializing CPU #2 |
| 436 | CPU: vendor Intel device 206a7 |
| 437 | CPU: family 06, model 2a, stepping 07 |
| 438 | CPU: vendor Intel device 206a7 |
| 439 | CPU: family 06, model 2a, stepping 07 |
| 440 | Enabling cache |
| 441 | CPU: vendor Intel device 206a7 |
| 442 | CPU: family 06, model 2a, stepping 07 |
| 443 | Enabling cache |
| 444 | Enabling cache |
| 445 | CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz. |
| 446 | CPU: platform id 4 |
| 447 | CPU: cpuid(1) 0x206a7 |
| 448 | CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz. |
| 449 | CPU: AES supported |
| 450 | CPU: TXT supported |
| 451 | CPU: VT supported |
| 452 | CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz. |
| 453 | Setting up local APIC...CPU: platform id 4 |
| 454 | apic_id: 0x03 done. |
| 455 | CPU: cpuid(1) 0x206a7 |
| 456 | IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| 457 | CPU: AES supported |
| 458 | CPU: TXT supported |
| 459 | CPU: VT supported |
| 460 | IA32_FEATURE_CONTROL already locked |
| 461 | Setting up local APIC...CPU: platform id 4 |
| 462 | CPU: cpuid(1) 0x206a7 |
| 463 | apic_id: 0x02 done. |
| 464 | CPU: AES supported |
| 465 | CPU: TXT supported |
| 466 | CPU: VT supported |
| 467 | IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| 468 | Setting up local APIC...IA32_FEATURE_CONTROL already locked |
| 469 | apic_id: 0x01 done. |
| 470 | IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| 471 | model_x06ax: energy policy set to 6 |
| 472 | IA32_FEATURE_CONTROL already locked |
| 473 | model_x06ax: frequency set to 2500 |
| 474 | CPU #3 initialized |
| 475 | model_x06ax: energy policy set to 6 |
| 476 | model_x06ax: frequency set to 2500 |
| 477 | CPU #2 initialized |
| 478 | model_x06ax: energy policy set to 6 |
| 479 | model_x06ax: frequency set to 2500 |
| 480 | CPU #1 initialized |
| 481 | bsp_do_flight_plan done after 8 msecs. |
| 482 | Initializing southbridge SMI... |
| 483 | SMI_STS: |
| 484 | GPE0_STS: GPIO14 GPIO11 GPIO9 GPIO7 GPIO5 GPIO4 GPIO3 GPIO2 |
| 485 | ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI5 GPI4 GPI3 GPI2 GPI1 GPI0 |
| 486 | TCO_STS: |
| 487 | Locking SMM. |
| 488 | CPU_CLUSTER: 0 init finished in 23625 usecs |
| 489 | PCI: 00:00.0 init ... |
| 490 | Disabling PEG12. |
| 491 | Disabling PEG11. |
| 492 | Disabling PEG10. |
| 493 | Disabling PEG60. |
| 494 | Disabling Device 7. |
| 495 | Disabling PEG IO clock. |
| 496 | Set BIOS_RESET_CPL |
| 497 | CPU TDP: 35 Watts |
| 498 | PCI: 00:00.0 init finished in 1016 usecs |
| 499 | PCI: 00:02.0 init ... |
| 500 | GT Power Management Init |
| 501 | SNB GT2 Power Meter Weights |
| 502 | GT Power Management Init (post VBIOS) |
| 503 | |
| 504 | [0.091519] CONFIG => |
| 505 | [0.091520] (Primary => |
| 506 | [0.091520] (Port => Internal, |
| 507 | [0.091521] Framebuffer => |
| 508 | [0.091521] (Width => 640, |
| 509 | [0.091522] Height => 400, |
| 510 | [0.091522] Start_X => 0, |
| 511 | [0.091523] Start_Y => 0, |
| 512 | [0.091523] Stride => 1, |
| 513 | [0.091524] V_Stride => 1, |
| 514 | [0.091524] Tiling => Linear , |
| 515 | [0.091525] Rotation => No_Rotation, |
| 516 | [0.091525] Offset => 0xffffffff, |
| 517 | [0.091526] BPC => 8), |
| 518 | [0.091526] Mode => |
| 519 | [0.091527] (Dotclock => 138650000, |
| 520 | [0.091527] H_Visible => 1920, |
| 521 | [0.091528] H_Sync_Begin => 1968, |
| 522 | [0.091528] H_Sync_End => 2000, |
| 523 | [0.091529] H_Total => 2080, |
| 524 | [0.091529] V_Visible => 1080, |
| 525 | [0.091530] V_Sync_Begin => 1083, |
| 526 | [0.091530] V_Sync_End => 1088, |
| 527 | [0.091531] V_Total => 1111, |
| 528 | [0.091532] H_Sync_Active_High => True, |
| 529 | [0.091532] V_Sync_Active_High => True, |
| 530 | [0.091533] BPC => 6)), |
| 531 | [0.091533] Secondary => |
| 532 | [0.091534] (Port => Disabled, |
| 533 | [0.091534] Framebuffer => |
| 534 | [0.091535] (Width => 1, |
| 535 | [0.091535] Height => 1, |
| 536 | [0.091536] Start_X => 0, |
| 537 | [0.091536] Start_Y => 0, |
| 538 | [0.091537] Stride => 1, |
| 539 | [0.091537] V_Stride => 1, |
| 540 | [0.091538] Tiling => Linear , |
| 541 | [0.091538] Rotation => No_Rotation, |
| 542 | [0.091539] Offset => 0x00000000, |
| 543 | [0.091539] BPC => 8), |
| 544 | [0.091540] Mode => |
| 545 | [0.091540] (Dotclock => 19200000, |
| 546 | [0.091541] H_Visible => 1, |
| 547 | [0.091541] H_Sync_Begin => 1, |
| 548 | [0.091542] H_Sync_End => 1, |
| 549 | [0.091542] H_Total => 1, |
| 550 | [0.091543] V_Visible => 1, |
| 551 | [0.091543] V_Sync_Begin => 1, |
| 552 | [0.091544] V_Sync_End => 1, |
| 553 | [0.091544] V_Total => 1, |
| 554 | [0.091545] H_Sync_Active_High => False, |
| 555 | [0.091545] V_Sync_Active_High => False, |
| 556 | [0.091546] BPC => 5)), |
| 557 | [0.091546] Tertiary => |
| 558 | [0.091547] (Port => Disabled, |
| 559 | [0.091547] Framebuffer => |
| 560 | [0.091548] (Width => 1, |
| 561 | [0.091548] Height => 1, |
| 562 | [0.091549] Start_X => 0, |
| 563 | [0.091549] Start_Y => 0, |
| 564 | [0.091550] Stride => 1, |
| 565 | [0.091550] V_Stride => 1, |
| 566 | [0.091551] Tiling => Linear , |
| 567 | [0.091551] Rotation => No_Rotation, |
| 568 | [0.091552] Offset => 0x00000000, |
| 569 | [0.091552] BPC => 8), |
| 570 | [0.091553] Mode => |
| 571 | [0.091553] (Dotclock => 19200000, |
| 572 | [0.091554] H_Visible => 1, |
| 573 | [0.091554] H_Sync_Begin => 1, |
| 574 | [0.091555] H_Sync_End => 1, |
| 575 | [0.091555] H_Total => 1, |
| 576 | [0.091556] V_Visible => 1, |
| 577 | [0.091556] V_Sync_Begin => 1, |
| 578 | [0.091557] V_Sync_End => 1, |
| 579 | [0.091557] V_Total => 1, |
| 580 | [0.091558] H_Sync_Active_High => False, |
| 581 | [0.091558] V_Sync_Active_High => False, |
| 582 | [0.091559] BPC => 5))); |
| 583 | PCI: 00:02.0 init finished in 42703 usecs |
| 584 | PCI: 00:04.0 init ... |
| 585 | PCI: 00:04.0 init finished in 0 usecs |
| 586 | PCI: 00:19.0 init ... |
| 587 | PCI: 00:19.0 init finished in 0 usecs |
| 588 | PCI: 00:1a.0 init ... |
| 589 | EHCI: Setting up controller.. done. |
| 590 | PCI: 00:1a.0 init finished in 12 usecs |
| 591 | PCI: 00:1b.0 init ... |
| 592 | Azalia: base = e1928000 |
| 593 | Azalia: codec_mask = 09 |
| 594 | Azalia: Initializing codec #3 |
| 595 | Azalia: codec viddid: 80862805 |
| 596 | Azalia: No verb! |
| 597 | Azalia: Initializing codec #0 |
| 598 | Azalia: codec viddid: 14f1506e |
| 599 | Azalia: verb_size: 52 |
| 600 | Azalia: verb loaded. |
| 601 | PCI: 00:1b.0 init finished in 4303 usecs |
| 602 | PCI: 00:1c.0 init ... |
| 603 | Initializing PCH PCIe bridge. |
| 604 | PCI: 00:1c.0 init finished in 7 usecs |
| 605 | PCI: 00:1c.1 init ... |
| 606 | Initializing PCH PCIe bridge. |
| 607 | PCI: 00:1c.1 init finished in 9 usecs |
| 608 | PCI: 00:1c.3 init ... |
| 609 | Initializing PCH PCIe bridge. |
| 610 | PCI: 00:1c.3 init finished in 7 usecs |
| 611 | PCI: 00:1d.0 init ... |
| 612 | EHCI: Setting up controller.. done. |
| 613 | PCI: 00:1d.0 init finished in 12 usecs |
| 614 | PCI: 00:1f.0 init ... |
| 615 | pch: lpc_init |
| 616 | PCH: detected QM67, device id: 0x1c4f, rev id 0x5 |
| 617 | IOAPIC: Initializing IOAPIC at 0xfec00000 |
| 618 | IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| 619 | IOAPIC: ID = 0x02 |
| 620 | Set power off after power failure. |
| 621 | NMI sources disabled. |
| 622 | CougarPoint PM init |
| 623 | RTC: failed = 0x0 |
| 624 | RTC Init |
| 625 | Disabling ACPI via APMC: |
| 626 | done. |
| 627 | pch_spi_init |
| 628 | PCI: 00:1f.0 init finished in 535 usecs |
| 629 | PCI: 00:1f.2 init ... |
| 630 | SATA: Initializing... |
| 631 | SATA: Controller in AHCI mode. |
| 632 | ABAR: e192e000 |
| 633 | PCI: 00:1f.2 init finished in 72 usecs |
| 634 | PCI: 00:1f.3 init ... |
| 635 | PCI: 00:1f.3 init finished in 7 usecs |
| 636 | PCI: 00:1f.6 init ... |
| 637 | PCI: 00:1f.6 init finished in 0 usecs |
| 638 | PCI: 01:00.0 init ... |
| 639 | PCI: 01:00.0 init finished in 0 usecs |
| 640 | PCI: 02:00.0 init ... |
| 641 | PCI: 02:00.0 init finished in 0 usecs |
| 642 | PNP: 00ff.2 init ... |
| 643 | PNP: 00ff.2 init finished in 0 usecs |
| 644 | smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ... |
| 645 | I2C: 01:54 init finished in 1 usecs |
| 646 | smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ... |
| 647 | I2C: 01:55 init finished in 1 usecs |
| 648 | smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ... |
| 649 | I2C: 01:56 init finished in 0 usecs |
| 650 | smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ... |
| 651 | I2C: 01:57 init finished in 0 usecs |
| 652 | smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ... |
| 653 | Locking EEPROM RFID |
| 654 | init EEPROM done |
| 655 | I2C: 01:5c init finished in 11826 usecs |
| 656 | smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ... |
| 657 | I2C: 01:5d init finished in 0 usecs |
| 658 | smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ... |
| 659 | I2C: 01:5e init finished in 0 usecs |
| 660 | smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ... |
| 661 | I2C: 01:5f init finished in 1 usecs |
| 662 | Devices initialized |
| 663 | BS: BS_DEV_INIT times (us): entry 16647 run 84276 exit 0 |
| 664 | Finalize devices... |
| 665 | PCI: 00:1f.0 final |
| 666 | Devices finalized |
| 667 | BS: BS_POST_DEVICE times (us): entry 0 run 49 exit 0 |
| 668 | BS: BS_OS_RESUME_CHECK times (us): entry 0 run 3 exit 0 |
| 669 | CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| 670 | CBFS: Locating 'fallback/dsdt.aml' |
| 671 | CBFS: Found @ offset 3ff40 size 388f |
| 672 | CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| 673 | CBFS: Locating 'fallback/slic' |
| 674 | CBFS: 'fallback/slic' not found. |
| 675 | ACPI: Writing ACPI tables at 7ff46000. |
| 676 | ACPI: * FACS |
| 677 | ACPI: * DSDT |
| 678 | ACPI: * FADT |
| 679 | ACPI: added table 1/32, length now 40 |
| 680 | ACPI: * SSDT |
| 681 | Found 1 CPU(s) with 4 core(s) each. |
| 682 | PSS: 2501MHz power 35000 control 0x2000 status 0x2000 |
| 683 | PSS: 2500MHz power 35000 control 0x1900 status 0x1900 |
| 684 | PSS: 2000MHz power 26404 control 0x1400 status 0x1400 |
| 685 | PSS: 1600MHz power 20160 control 0x1000 status 0x1000 |
| 686 | PSS: 1200MHz power 14397 control 0xc00 status 0xc00 |
| 687 | PSS: 800MHz power 9139 control 0x800 status 0x800 |
| 688 | PSS: 2501MHz power 35000 control 0x2000 status 0x2000 |
| 689 | PSS: 2500MHz power 35000 control 0x1900 status 0x1900 |
| 690 | PSS: 2000MHz power 26404 control 0x1400 status 0x1400 |
| 691 | PSS: 1600MHz power 20160 control 0x1000 status 0x1000 |
| 692 | PSS: 1200MHz power 14397 control 0xc00 status 0xc00 |
| 693 | PSS: 800MHz power 9139 control 0x800 status 0x800 |
| 694 | PSS: 2501MHz power 35000 control 0x2000 status 0x2000 |
| 695 | PSS: 2500MHz power 35000 control 0x1900 status 0x1900 |
| 696 | PSS: 2000MHz power 26404 control 0x1400 status 0x1400 |
| 697 | PSS: 1600MHz power 20160 control 0x1000 status 0x1000 |
| 698 | PSS: 1200MHz power 14397 control 0xc00 status 0xc00 |
| 699 | PSS: 800MHz power 9139 control 0x800 status 0x800 |
| 700 | PSS: 2501MHz power 35000 control 0x2000 status 0x2000 |
| 701 | PSS: 2500MHz power 35000 control 0x1900 status 0x1900 |
| 702 | PSS: 2000MHz power 26404 control 0x1400 status 0x1400 |
| 703 | PSS: 1600MHz power 20160 control 0x1000 status 0x1000 |
| 704 | PSS: 1200MHz power 14397 control 0xc00 status 0xc00 |
| 705 | PSS: 800MHz power 9139 control 0x800 status 0x800 |
| 706 | Generating ACPI PIRQ entries |
| 707 | \_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0 |
| 708 | ACPI: * H8 |
| 709 | H8: BDC installed |
| 710 | H8: WWAN detection not implemented. Assuming WWAN installed |
| 711 | \_SB.PCI0.RP01.WIFI: PCI: 01:00.0 |
| 712 | ACPI: added table 2/32, length now 44 |
| 713 | ACPI: * MCFG |
| 714 | ACPI: added table 3/32, length now 48 |
| 715 | ACPI: * TCPA |
| 716 | TCPA log created at 7ff35000 |
| 717 | ACPI: added table 4/32, length now 52 |
| 718 | ACPI: * MADT |
| 719 | ACPI: added table 5/32, length now 56 |
| 720 | current = 7ff4b770 |
| 721 | ACPI: * DMAR |
| 722 | ACPI: added table 6/32, length now 60 |
| 723 | current = 7ff4b840 |
| 724 | CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| 725 | CBFS: Locating 'vbt.bin' |
| 726 | CBFS: Found @ offset 3b500 size 572 |
| 727 | Found a VBT of 3985 bytes after decompression |
| 728 | GMA: Found VBT in CBFS |
| 729 | GMA: Found valid VBT in CBFS |
| 730 | ACPI: * HPET |
| 731 | ACPI: added table 7/32, length now 64 |
| 732 | ACPI: done. |
| 733 | ACPI tables: 30848 bytes. |
| 734 | smbios_write_tables: 7ff34000 |
| 735 | Create SMBIOS type 17 |
| 736 | PCI: 01:00.0 (unknown) |
| 737 | SMBIOS tables: 673 bytes. |
| 738 | Writing table forward entry at 0x00000500 |
| 739 | Wrote coreboot table at: 00000500, 0x10 bytes, checksum dfe7 |
| 740 | Writing coreboot table at 0x7ff6a000 |
| 741 | 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 742 | 1. 0000000000001000-000000000009ffff: RAM |
| 743 | 2. 00000000000a0000-00000000000fffff: RESERVED |
| 744 | 3. 0000000000100000-000000001fffffff: RAM |
| 745 | 4. 0000000020000000-00000000201fffff: RESERVED |
| 746 | 5. 0000000020200000-000000003fffffff: RAM |
| 747 | 6. 0000000040000000-00000000401fffff: RESERVED |
| 748 | 7. 0000000040200000-000000007ff33fff: RAM |
| 749 | 8. 000000007ff34000-000000007ff82fff: CONFIGURATION TABLES |
| 750 | 9. 000000007ff83000-000000007ffcefff: RAMSTAGE |
| 751 | 10. 000000007ffcf000-000000007fffffff: CONFIGURATION TABLES |
| 752 | 11. 0000000080000000-00000000829fffff: RESERVED |
| 753 | 12. 00000000f0000000-00000000f3ffffff: RESERVED |
| 754 | 13. 00000000fed40000-00000000fed44fff: RESERVED |
| 755 | 14. 00000000fed90000-00000000fed91fff: RESERVED |
| 756 | 15. 0000000100000000-000000027b5fffff: RAM |
| 757 | Manufacturer: c2 |
| 758 | SF: Detected MX25L6405D with sector size 0x1000, total 0x800000 |
| 759 | CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| 760 | Wrote coreboot table at: 7ff6a000, 0x38c bytes, checksum e141 |
| 761 | coreboot table: 932 bytes. |
| 762 | IMD ROOT 0. 7ffff000 00001000 |
| 763 | IMD SMALL 1. 7fffe000 00001000 |
| 764 | CONSOLE 2. 7ffde000 00020000 |
| 765 | TIME STAMP 3. 7ffdd000 00000910 |
| 766 | ROMSTG STCK 4. 7ffd8000 00005000 |
| 767 | AFTER CAR 5. 7ffcf000 00009000 |
| 768 | RAMSTAGE 6. 7ff82000 0004d000 |
| 769 | SMM BACKUP 7. 7ff72000 00010000 |
| 770 | COREBOOT 8. 7ff6a000 00008000 |
| 771 | ACPI 9. 7ff46000 00024000 |
| 772 | ACPI GNVS 10. 7ff45000 00001000 |
| 773 | TCPA TCGLOG11. 7ff35000 00010000 |
| 774 | SMBIOS 12. 7ff34000 00000800 |
| 775 | IMD small region: |
| 776 | IMD ROOT 0. 7fffec00 00000400 |
| 777 | MEM INFO 1. 7fffea40 000001a9 |
| 778 | ROMSTAGE 2. 7fffea20 00000004 |
| 779 | COREBOOTFWD 3. 7fffe9e0 00000028 |
| 780 | BS: BS_WRITE_TABLES times (us): entry 0 run 26245 exit 0 |
| 781 | CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| 782 | CBFS: Locating 'fallback/payload' |
| 783 | CBFS: Found @ offset 43840 size 106f3 |
| 784 | Checking segment from ROM address 0xfff53a78 |
| 785 | Payload being loaded at below 1MiB without region being marked as RAM usable. |
| 786 | Checking segment from ROM address 0xfff53a94 |
| 787 | Loading segment from ROM address 0xfff53a78 |
| 788 | code (compression=1) |
| 789 | New segment dstaddr 0x000e0d20 memsize 0x1f2e0 srcaddr 0xfff53ab0 filesize 0x106bb |
| 790 | Loading Segment: addr: 0x000e0d20 memsz: 0x000000000001f2e0 filesz: 0x00000000000106bb |
| 791 | using LZMA |
| 792 | Loading segment from ROM address 0xfff53a94 |
| 793 | Entry Point 0x000fd274 |
| 794 | BS: BS_PAYLOAD_LOAD times (us): entry 1 run 29438 exit 0 |
| 795 | PCH: watchdog disabled |
| 796 | Jumping to boot code at 000fd274(7ff6a000) |
| 797 | SeaBIOS (version rel-1.12.0-0-ga698c89) |
| 798 | BUILD: gcc: (coreboot toolchain v2d22d335dc 2019-03-22) 8.2.0 binutils: (GNU Binutils) 2.32 |
| 799 | Found coreboot cbmem console @ 7ffde000 |
| 800 | Found mainboard LENOVO ThinkPad T420s |
| 801 | Relocating init from 0x000e2380 to 0x7fee7520 (size 51680) |
| 802 | Found CBFS header at 0xfff10238 |
| 803 | multiboot: eax=7ffb94c0, ebx=7ffb9474 |
| 804 | Found 16 PCI devices (max PCI bus is 03) |
| 805 | Copying SMBIOS entry point from 0x7ff34000 to 0x000f67a0 |
| 806 | Copying ACPI RSDP from 0x7ff46000 to 0x000f6770 |
| 807 | Using pmtimer, ioport 0x508 |
| 808 | Scan for VGA option rom |
| 809 | Running option rom at c000:0003 |
| 810 | pmm call arg1=0 |
| 811 | Turning on vga text mode console |
| 812 | SeaBIOS (version rel-1.12.0-0-ga698c89) |
| 813 | Machine UUID 23ffe501-511f-11cb-824e-8948558b60a7 |
| 814 | EHCI init on dev 00:1a.0 (regs=0xe192f020) |
| 815 | EHCI init on dev 00:1d.0 (regs=0xe1930020) |
| 816 | AHCI controller at 00:1f.2, iobase 0xe192e000, irq 10 |
| 817 | Searching bootorder for: /pci@i0cf8/pci-bridge@1c,1/*@0 |
| 818 | Found 0 lpt ports |
| 819 | Found 0 serial ports |
| 820 | Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0 |
| 821 | AHCI/1: registering: "DVD/CD [AHCI/1: Optiarc DVD RW AD-7930H ATAPI-8 DVD/CD]" |
| 822 | Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 |
| 823 | AHCI/0: Set transfer mode to UDMA-6 |
| 824 | AHCI/0: registering: "AHCI/0: Samsung SSD 860 EVO 500GB ATA-11 Hard-Disk (465 GiBytes)" |
| 825 | Initialized USB HUB (0 ports used) |
| 826 | Initialized USB HUB (0 ports used) |
| 827 | PS2 keyboard initialized |
| 828 | All threads complete. |
| 829 | Scan for option roms |
| 830 | |
| 831 | Press ESC for boot menu. |
| 832 | |
| 833 | Select boot device: |
| 834 | |
| 835 | 1. DVD/CD [AHCI/1: Optiarc DVD RW AD-7930H ATAPI-8 DVD/CD] |
| 836 | 2. AHCI/0: Samsung SSD 860 EVO 500GB ATA-11 Hard-Disk (465 GiBytes) |
| 837 | |
| 838 | t. TPM Configuration |
| 839 | |
| 840 | Searching bootorder for: HALT |
| 841 | drive 0x000f66b0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=976773168 |
| 842 | Space available for UMB: c7000-ed800, f5fc0-f6680 |
| 843 | Returned 253952 bytes of ZoneHigh |
| 844 | e820 map has 13 items: |
| 845 | 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 846 | 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 847 | 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 848 | 3: 0000000000100000 - 0000000020000000 = 1 RAM |
| 849 | 4: 0000000020000000 - 0000000020200000 = 2 RESERVED |
| 850 | 5: 0000000020200000 - 0000000040000000 = 1 RAM |
| 851 | 6: 0000000040000000 - 0000000040200000 = 2 RESERVED |
| 852 | 7: 0000000040200000 - 000000007ff32000 = 1 RAM |
| 853 | 8: 000000007ff32000 - 0000000082a00000 = 2 RESERVED |
| 854 | 9: 00000000f0000000 - 00000000f4000000 = 2 RESERVED |
| 855 | 10: 00000000fed40000 - 00000000fed45000 = 2 RESERVED |
| 856 | 11: 00000000fed90000 - 00000000fed92000 = 2 RESERVED |
| 857 | 12: 0000000100000000 - 000000027b600000 = 1 RAM |
| 858 | enter handle_19: |
| 859 | NULL |
| 860 | Booting from Hard Disk... |
| 861 | Booting from 0000:7c00 |
| 862 | |