Paul Menzel | 2628571 | 2017-04-17 10:57:51 +0200 | [diff] [blame] | 1 | [ 0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18) |
| 2 | [ 0.000000] Command line: BOOT_IMAGE=(crypto0)/@/vmlinuz root=/dev/mapper/cryptdisk rootflags=subvol=@ ro quiet |
| 3 | [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| 4 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| 5 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| 6 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| 7 | [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| 8 | [ 0.000000] x86/fpu: Using 'eager' FPU context switches. |
| 9 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| 11 | [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| 12 | [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| 13 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| 14 | [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| 15 | [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| 16 | [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| 17 | [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfe9afff] usable |
| 18 | [ 0.000000] BIOS-e820: [mem 0x00000000bfe9b000-0x00000000bfffffff] type 16 |
| 19 | [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved |
| 20 | [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| 21 | [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| 22 | [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| 23 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013c5fffff] usable |
| 24 | [ 0.000000] NX (Execute Disable) protection: active |
| 25 | [ 0.000000] SMBIOS 2.7 present. |
| 26 | [ 0.000000] DMI: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.5-260-g3d302b0 11/14/2016 |
| 27 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 28 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 29 | [ 0.000000] e820: last_pfn = 0x13c600 max_arch_pfn = 0x400000000 |
| 30 | [ 0.000000] MTRR default type: write-back |
| 31 | [ 0.000000] MTRR fixed ranges enabled: |
| 32 | [ 0.000000] 00000-9FFFF write-back |
| 33 | [ 0.000000] A0000-BFFFF uncachable |
| 34 | [ 0.000000] C0000-FFFFF write-back |
| 35 | [ 0.000000] MTRR variable ranges enabled: |
| 36 | [ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable |
| 37 | [ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining |
| 38 | [ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable |
| 39 | [ 0.000000] 3 disabled |
| 40 | [ 0.000000] 4 disabled |
| 41 | [ 0.000000] 5 disabled |
| 42 | [ 0.000000] 6 disabled |
| 43 | [ 0.000000] 7 disabled |
| 44 | [ 0.000000] 8 disabled |
| 45 | [ 0.000000] 9 disabled |
| 46 | [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| 47 | [ 0.000000] e820: last_pfn = 0xbfe9b max_arch_pfn = 0x400000000 |
| 48 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 49 | [ 0.000000] reserving inaccessible SNB gfx pages |
| 50 | [ 0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE |
| 51 | [ 0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE |
| 52 | [ 0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE |
| 53 | [ 0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE |
| 54 | [ 0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE |
| 55 | [ 0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE |
| 56 | [ 0.000000] RAMDISK: [mem 0x35cc5000-0x36e59fff] |
| 57 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 58 | [ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) |
| 59 | [ 0.000000] ACPI: XSDT 0x00000000BFEAF0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 60 | [ 0.000000] ACPI: FACP 0x00000000BFEB28B0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| 61 | [ 0.000000] ACPI: DSDT 0x00000000BFEAF280 003627 (v02 COREv4 COREBOOT 20110725 INTL 20160318) |
| 62 | [ 0.000000] ACPI: FACS 0x00000000BFEAF240 000040 |
| 63 | [ 0.000000] ACPI: FACS 0x00000000BFEAF240 000040 |
| 64 | [ 0.000000] ACPI: SSDT 0x00000000BFEB29B0 001569 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 65 | [ 0.000000] ACPI: MCFG 0x00000000BFEB3F20 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 66 | [ 0.000000] ACPI: TCPA 0x00000000BFEB3F60 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 67 | [ 0.000000] ACPI: APIC 0x00000000BFEB3FA0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 68 | [ 0.000000] ACPI: DMAR 0x00000000BFEB4010 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 69 | [ 0.000000] ACPI: HPET 0x00000000BFEB40C0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 70 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 71 | [ 0.000000] No NUMA configuration found |
| 72 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013c5fffff] |
| 73 | [ 0.000000] NODE_DATA(0) allocated [mem 0x13c5fa000-0x13c5fefff] |
| 74 | [ 0.000000] Zone ranges: |
| 75 | [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| 76 | [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| 77 | [ 0.000000] Normal [mem 0x0000000100000000-0x000000013c5fffff] |
| 78 | [ 0.000000] Device empty |
| 79 | [ 0.000000] Movable zone start for each node |
| 80 | [ 0.000000] Early memory node ranges |
| 81 | [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| 82 | [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] |
| 83 | [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] |
| 84 | [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000bfe9afff] |
| 85 | [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013c5fffff] |
| 86 | [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013c5fffff] |
| 87 | [ 0.000000] On node 0 totalpages: 1032250 |
| 88 | [ 0.000000] DMA zone: 64 pages used for memmap |
| 89 | [ 0.000000] DMA zone: 159 pages reserved |
| 90 | [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| 91 | [ 0.000000] DMA32 zone: 12203 pages used for memmap |
| 92 | [ 0.000000] DMA32 zone: 780955 pages, LIFO batch:31 |
| 93 | [ 0.000000] Normal zone: 3864 pages used for memmap |
| 94 | [ 0.000000] Normal zone: 247296 pages, LIFO batch:31 |
| 95 | [ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff |
| 96 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 97 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 98 | [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| 99 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 100 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 101 | [ 0.000000] ACPI: IRQ0 used by override. |
| 102 | [ 0.000000] ACPI: IRQ9 used by override. |
| 103 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 104 | [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| 105 | [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 106 | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| 107 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| 108 | [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| 109 | [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| 110 | [ 0.000000] PM: Registered nosave memory: [mem 0xbfe9b000-0xbfffffff] |
| 111 | [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff] |
| 112 | [ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff] |
| 113 | [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| 114 | [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff] |
| 115 | [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| 116 | [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| 117 | [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| 118 | [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| 119 | [ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices |
| 120 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 121 | [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| 122 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| 123 | [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88013c200000 s93720 r8192 d29160 u524288 |
| 124 | [ 0.000000] pcpu-alloc: s93720 r8192 d29160 u524288 alloc=1*2097152 |
| 125 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| 126 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015960 |
| 127 | [ 0.000000] Policy zone: Normal |
| 128 | [ 0.000000] Kernel command line: BOOT_IMAGE=(crypto0)/@/vmlinuz root=/dev/mapper/cryptdisk rootflags=subvol=@ ro quiet |
| 129 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 130 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 131 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 132 | [ 0.000000] Memory: 3964432K/4129000K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 164568K reserved, 0K cma-reserved) |
| 133 | [ 0.000000] Hierarchical RCU implementation. |
| 134 | [ 0.000000] Build-time adjustment of leaf fanout to 64. |
| 135 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| 136 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 |
| 137 | [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 |
| 138 | [ 0.000000] Console: colour VGA+ 80x25 |
| 139 | [ 0.000000] console [tty0] enabled |
| 140 | [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| 141 | [ 0.000000] hpet clockevent registered |
| 142 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 143 | [ 0.000000] tsc: Detected 2494.232 MHz processor |
| 144 | [ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.46 BogoMIPS (lpj=9976928) |
| 145 | [ 0.000035] pid_max: default: 32768 minimum: 301 |
| 146 | [ 0.000046] ACPI: Core revision 20160108 |
| 147 | [ 0.002988] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| 148 | |
| 149 | [ 0.003028] Security Framework initialized |
| 150 | [ 0.003030] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 151 | [ 0.003037] AppArmor: AppArmor disabled by boot time parameter |
| 152 | [ 0.003296] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 153 | [ 0.004262] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| 154 | [ 0.004718] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| 155 | [ 0.004725] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| 156 | [ 0.005092] Disabling memory control group subsystem |
| 157 | [ 0.005121] CPU: Physical Processor ID: 0 |
| 158 | [ 0.005122] CPU: Processor Core ID: 0 |
| 159 | [ 0.005128] mce: CPU supports 7 MCE banks |
| 160 | [ 0.005140] CPU0: Thermal monitoring enabled (TM1) |
| 161 | [ 0.005146] process: using mwait in idle threads |
| 162 | [ 0.005150] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| 163 | [ 0.005151] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| 164 | [ 0.005537] Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000) |
| 165 | [ 0.007527] ftrace: allocating 24381 entries in 96 pages |
| 166 | [ 0.018414] smpboot: Max logical packages: 2 |
| 167 | [ 0.018417] smpboot: APIC(0) Converting physical 0 to logical package 0 |
| 168 | [ 0.018428] DMAR: Host address width 36 |
| 169 | [ 0.018429] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| 170 | [ 0.018435] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| 171 | [ 0.018436] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| 172 | [ 0.018440] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| 173 | [ 0.018442] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| 174 | [ 0.018443] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| 175 | [ 0.018444] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| 176 | [ 0.018799] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| 177 | [ 0.018802] x2apic enabled |
| 178 | [ 0.018809] Switched APIC routing to cluster x2apic. |
| 179 | [ 0.019264] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 180 | [ 0.058955] TSC deadline timer enabled |
| 181 | [ 0.058958] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) |
| 182 | [ 0.058982] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. |
| 183 | [ 0.059003] ... version: 3 |
| 184 | [ 0.059004] ... bit width: 48 |
| 185 | [ 0.059005] ... generic registers: 4 |
| 186 | [ 0.059006] ... value mask: 0000ffffffffffff |
| 187 | [ 0.059007] ... max period: 0000ffffffffffff |
| 188 | [ 0.059008] ... fixed-purpose events: 3 |
| 189 | [ 0.059009] ... event mask: 000000070000000f |
| 190 | [ 0.059569] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 191 | [ 0.059667] x86: Booting SMP configuration: |
| 192 | [ 0.059668] .... node #0, CPUs: #1 #2 #3 |
| 193 | [ 0.301115] x86: Booted up 1 node, 4 CPUs |
| 194 | [ 0.301119] smpboot: Total of 4 processors activated (19957.16 BogoMIPS) |
| 195 | [ 0.304385] devtmpfs: initialized |
| 196 | [ 0.304453] x86/mm: Memory block size: 128MB |
| 197 | [ 0.307493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| 198 | [ 0.307558] pinctrl core: initialized pinctrl subsystem |
| 199 | [ 0.307697] NET: Registered protocol family 16 |
| 200 | [ 0.316152] cpuidle: using governor ladder |
| 201 | [ 0.325092] cpuidle: using governor menu |
| 202 | [ 0.325231] ACPI: bus type PCI registered |
| 203 | [ 0.325233] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 204 | [ 0.325315] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) |
| 205 | [ 0.325317] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 |
| 206 | [ 0.325327] PCI: Using configuration type 1 for base access |
| 207 | [ 0.325351] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| 208 | [ 0.333310] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 209 | [ 0.333573] ACPI: Added _OSI(Module Device) |
| 210 | [ 0.333574] ACPI: Added _OSI(Processor Device) |
| 211 | [ 0.333575] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 212 | [ 0.333576] ACPI: Added _OSI(Processor Aggregator Device) |
| 213 | [ 0.333794] ACPI: Executed 1 blocks of module-level executable AML code |
| 214 | [ 0.335688] ACPI : EC: EC started |
| 215 | [ 0.335733] ACPI: Interpreter enabled |
| 216 | [ 0.335748] ACPI: (supports S0 S3 S4 S5) |
| 217 | [ 0.335749] ACPI: Using IOAPIC for interrupt routing |
| 218 | [ 0.335772] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 219 | [ 0.340099] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 220 | [ 0.340104] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 221 | [ 0.340152] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 222 | [ 0.340165] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| 223 | [ 0.340359] PCI host bridge to bus 0000:00 |
| 224 | [ 0.340362] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| 225 | [ 0.340364] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| 226 | [ 0.340365] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| 227 | [ 0.340367] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| 228 | [ 0.340368] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| 229 | [ 0.340370] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| 230 | [ 0.340371] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| 231 | [ 0.340373] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| 232 | [ 0.340374] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| 233 | [ 0.340376] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| 234 | [ 0.340377] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| 235 | [ 0.340379] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| 236 | [ 0.340380] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| 237 | [ 0.340381] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| 238 | [ 0.340383] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| 239 | [ 0.340384] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| 240 | [ 0.340386] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window] |
| 241 | [ 0.340388] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| 242 | [ 0.340389] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 243 | [ 0.340397] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 |
| 244 | [ 0.340485] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 |
| 245 | [ 0.340494] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit] |
| 246 | [ 0.340500] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] |
| 247 | [ 0.340504] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| 248 | [ 0.340580] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000 |
| 249 | [ 0.340589] pci 0000:00:04.0: reg 0x10: [mem 0xf1620000-0xf1627fff 64bit] |
| 250 | [ 0.340690] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| 251 | [ 0.340705] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff] |
| 252 | [ 0.340714] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff] |
| 253 | [ 0.340723] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| 254 | [ 0.340783] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| 255 | [ 0.340853] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| 256 | [ 0.340871] pci 0000:00:1a.0: reg 0x10: [mem 0xf162e000-0xf162e3ff] |
| 257 | [ 0.340954] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| 258 | [ 0.340990] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| 259 | [ 0.341032] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| 260 | [ 0.341050] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit] |
| 261 | [ 0.341123] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| 262 | [ 0.341162] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| 263 | [ 0.341204] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| 264 | [ 0.341279] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| 265 | [ 0.341358] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 |
| 266 | [ 0.341435] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| 267 | [ 0.341513] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 |
| 268 | [ 0.341592] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| 269 | [ 0.341673] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 |
| 270 | [ 0.341797] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| 271 | [ 0.341884] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400 |
| 272 | [ 0.341995] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold |
| 273 | [ 0.342081] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| 274 | [ 0.342100] pci 0000:00:1d.0: reg 0x10: [mem 0xf162f000-0xf162f3ff] |
| 275 | [ 0.342182] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| 276 | [ 0.342217] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| 277 | [ 0.342260] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 |
| 278 | [ 0.342426] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 |
| 279 | [ 0.342444] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| 280 | [ 0.342452] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| 281 | [ 0.342461] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| 282 | [ 0.342470] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| 283 | [ 0.342478] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| 284 | [ 0.342487] pci 0000:00:1f.2: reg 0x24: [mem 0xf162d000-0xf162d7ff] |
| 285 | [ 0.342533] pci 0000:00:1f.2: PME# supported from D3hot |
| 286 | [ 0.342601] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| 287 | [ 0.342618] pci 0000:00:1f.3: reg 0x10: [mem 0xf1630000-0xf16300ff 64bit] |
| 288 | [ 0.342639] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| 289 | [ 0.342765] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 290 | [ 0.342849] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000 |
| 291 | [ 0.342893] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf147ffff 64bit] |
| 292 | [ 0.342977] pci 0000:02:00.0: reg 0x30: [mem 0xf1480000-0xf148ffff pref] |
| 293 | [ 0.343091] pci 0000:02:00.0: supports D1 D2 |
| 294 | [ 0.343092] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 295 | [ 0.348213] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 296 | [ 0.348229] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff] |
| 297 | [ 0.348344] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| 298 | [ 0.348349] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| 299 | [ 0.348353] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff] |
| 300 | [ 0.348360] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref] |
| 301 | [ 0.348459] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501 |
| 302 | [ 0.348493] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz. |
| 303 | [ 0.348531] pci 0000:04:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff] |
| 304 | [ 0.348834] pci 0000:04:00.0: supports D1 D2 |
| 305 | [ 0.348836] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 306 | [ 0.356218] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| 307 | [ 0.356234] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff] |
| 308 | [ 0.356335] pci 0000:00:1c.5: PCI bridge to [bus 05] |
| 309 | [ 0.356473] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 310 | [ 0.356522] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 311 | [ 0.356567] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 312 | [ 0.356612] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 313 | [ 0.356657] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 314 | [ 0.356701] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 315 | [ 0.356746] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 316 | [ 0.356791] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 317 | [ 0.357470] ACPI: Enabled 1 GPEs in block 00 to 3F |
| 318 | [ 0.357519] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 |
| 319 | [ 0.357606] vgaarb: setting as boot device: PCI:0000:00:02.0 |
| 320 | [ 0.357608] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| 321 | [ 0.357610] vgaarb: loaded |
| 322 | [ 0.357612] vgaarb: bridge control possible 0000:00:02.0 |
| 323 | [ 0.357700] PCI: Using ACPI for IRQ routing |
| 324 | [ 0.359160] PCI: pci_cache_line_size set to 64 bytes |
| 325 | [ 0.359228] e820: reserve RAM buffer [mem 0xbfe9b000-0xbfffffff] |
| 326 | [ 0.359229] e820: reserve RAM buffer [mem 0x13c600000-0x13fffffff] |
| 327 | [ 0.359402] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| 328 | [ 0.359407] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| 329 | [ 0.361432] clocksource: Switched to clocksource hpet |
| 330 | [ 0.367371] VFS: Disk quotas dquot_6.6.0 |
| 331 | [ 0.367400] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 332 | [ 0.367544] pnp: PnP ACPI init |
| 333 | [ 0.367645] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| 334 | [ 0.367647] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| 335 | [ 0.367649] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| 336 | [ 0.367651] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| 337 | [ 0.367652] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved |
| 338 | [ 0.367654] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| 339 | [ 0.367656] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| 340 | [ 0.367658] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| 341 | [ 0.367659] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| 342 | [ 0.367661] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| 343 | [ 0.367665] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 344 | [ 0.368204] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| 345 | [ 0.368207] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| 346 | [ 0.368247] system 00:02: [io 0x0500-0x057f] could not be reserved |
| 347 | [ 0.368249] system 00:02: [io 0x0480-0x04bf] has been reserved |
| 348 | [ 0.368251] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 349 | [ 0.368274] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 350 | [ 0.368308] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 351 | [ 0.368337] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 352 | [ 0.368432] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| 353 | [ 0.368449] pnp: PnP ACPI: found 7 devices |
| 354 | [ 0.374840] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| 355 | [ 0.374897] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 356 | [ 0.374912] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 357 | [ 0.374918] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff] |
| 358 | [ 0.374926] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| 359 | [ 0.374929] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| 360 | [ 0.374935] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff] |
| 361 | [ 0.374940] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref] |
| 362 | [ 0.374947] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| 363 | [ 0.374954] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff] |
| 364 | [ 0.374965] pci 0000:00:1c.5: PCI bridge to [bus 05] |
| 365 | [ 0.374983] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| 366 | [ 0.374985] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| 367 | [ 0.374987] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| 368 | [ 0.374988] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| 369 | [ 0.374990] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| 370 | [ 0.374991] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| 371 | [ 0.374993] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| 372 | [ 0.374994] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| 373 | [ 0.374996] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| 374 | [ 0.374997] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| 375 | [ 0.374998] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| 376 | [ 0.375000] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| 377 | [ 0.375001] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| 378 | [ 0.375003] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| 379 | [ 0.375004] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| 380 | [ 0.375006] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| 381 | [ 0.375007] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window] |
| 382 | [ 0.375009] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| 383 | [ 0.375011] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff] |
| 384 | [ 0.375012] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| 385 | [ 0.375014] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff] |
| 386 | [ 0.375015] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref] |
| 387 | [ 0.375017] pci_bus 0000:04: resource 1 [mem 0xf1500000-0xf15fffff] |
| 388 | [ 0.375075] NET: Registered protocol family 2 |
| 389 | [ 0.375234] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| 390 | [ 0.375310] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| 391 | [ 0.375412] TCP: Hash tables configured (established 32768 bind 32768) |
| 392 | [ 0.375434] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| 393 | [ 0.375451] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| 394 | [ 0.375522] NET: Registered protocol family 1 |
| 395 | [ 0.375538] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| 396 | [ 0.375934] PCI: CLS 64 bytes, default 64 |
| 397 | [ 0.375983] Unpacking initramfs... |
| 398 | [ 0.694913] Freeing initrd memory: 18004K (ffff880035cc5000 - ffff880036e5a000) |
| 399 | [ 0.694995] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 400 | [ 0.694998] software IO TLB [mem 0xbbe9b000-0xbfe9b000] (64MB) mapped at [ffff8800bbe9b000-ffff8800bfe9afff] |
| 401 | [ 0.695053] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| 402 | [ 0.695054] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| 403 | [ 0.695055] RAPL PMU: hw unit of domain package 2^-16 Joules |
| 404 | [ 0.695056] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| 405 | [ 0.695457] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| 406 | [ 0.695497] audit: initializing netlink subsys (disabled) |
| 407 | [ 0.695512] audit: type=2000 audit(1479114970.692:1): initialized |
| 408 | [ 0.695950] Initialise system trusted keyring |
| 409 | [ 0.696042] workingset: timestamp_bits=37 max_order=20 bucket_order=0 |
| 410 | [ 0.696062] zbud: loaded |
| 411 | [ 0.743514] Key type asymmetric registered |
| 412 | [ 0.743517] Asymmetric key parser 'x509' registered |
| 413 | [ 0.743538] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| 414 | [ 0.743570] io scheduler noop registered |
| 415 | [ 0.743573] io scheduler deadline registered |
| 416 | [ 0.743589] io scheduler cfq registered (default) |
| 417 | [ 0.744406] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| 418 | [ 0.744411] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded |
| 419 | [ 0.744432] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| 420 | [ 0.744434] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| 421 | [ 0.744438] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded |
| 422 | [ 0.744459] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt |
| 423 | [ 0.744464] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded |
| 424 | [ 0.744489] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt |
| 425 | [ 0.744491] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt |
| 426 | [ 0.744496] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded |
| 427 | [ 0.744520] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt |
| 428 | [ 0.744525] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded |
| 429 | [ 0.744532] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 430 | [ 0.744546] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| 431 | [ 0.744574] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded |
| 432 | [ 0.744579] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 433 | [ 0.744602] intel_idle: MWAIT substates: 0x21120 |
| 434 | [ 0.744603] intel_idle: v0.4.1 model 0x2A |
| 435 | [ 0.744755] intel_idle: lapic_timer_reliable_states 0xffffffff |
| 436 | [ 0.744781] GHES: HEST is not enabled! |
| 437 | [ 0.744846] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 438 | [ 0.745230] Linux agpgart interface v0.103 |
| 439 | [ 0.745282] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| 440 | [ 0.745283] AMD IOMMUv2 functionality not available on this system |
| 441 | [ 0.745643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 442 | [ 0.750313] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 443 | [ 0.750318] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 444 | [ 0.750502] mousedev: PS/2 mouse device common for all mice |
| 445 | [ 0.750543] rtc_cmos 00:03: RTC can wake from S4 |
| 446 | [ 0.750698] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| 447 | [ 0.750727] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| 448 | [ 0.750738] Intel P-state driver initializing. |
| 449 | [ 0.755277] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 450 | [ 0.801642] ledtrig-cpu: registered to indicate activity on CPUs |
| 451 | [ 0.802341] NET: Registered protocol family 10 |
| 452 | [ 0.802788] mip6: Mobile IPv6 |
| 453 | [ 0.802797] NET: Registered protocol family 17 |
| 454 | [ 0.802808] mpls_gso: MPLS GSO support |
| 455 | [ 0.803446] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29 |
| 456 | [ 0.803470] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29 |
| 457 | [ 0.803485] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29 |
| 458 | [ 0.803505] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29 |
| 459 | [ 0.803683] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 460 | [ 0.804348] registered taskstats version 1 |
| 461 | [ 0.804403] Loading compiled-in X.509 certificates |
| 462 | [ 0.807634] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) |
| 463 | [ 0.808446] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' |
| 464 | [ 0.808511] zswap: loaded using pool lzo/zbud |
| 465 | [ 0.809301] rtc_cmos 00:03: setting system clock to 2016-11-14 09:16:11 UTC (1479114971) |
| 466 | [ 0.809527] PM: Hibernation image not present or could not be loaded. |
| 467 | [ 0.812768] Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000) |
| 468 | [ 0.812773] Write protecting the kernel read-only data: 10240k |
| 469 | [ 0.813227] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000) |
| 470 | [ 0.821647] Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000) |
| 471 | [ 0.838723] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| 472 | [ 0.957764] random: systemd-udevd urandom read with 1 bits of entropy available |
| 473 | [ 0.997175] fjes: module verification failed: signature and/or required key missing - tainting kernel |
| 474 | [ 0.997755] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED |
| 475 | [ 1.010213] thermal LNXTHERM:00: registered as thermal_zone0 |
| 476 | [ 1.010219] ACPI: Thermal Zone [THM0] (54 C) |
| 477 | [ 1.010565] pps_core: LinuxPPS API ver. 1 registered |
| 478 | [ 1.010570] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 479 | [ 1.010948] PTP clock support registered |
| 480 | [ 1.011403] thermal LNXTHERM:01: registered as thermal_zone1 |
| 481 | [ 1.011408] ACPI: Thermal Zone [THM1] (27 C) |
| 482 | [ 1.012600] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| 483 | [ 1.012604] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| 484 | [ 1.012724] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 485 | [ 1.014933] sdhci: Secure Digital Host Controller Interface driver |
| 486 | [ 1.014937] sdhci: Copyright(c) Pierre Ossman |
| 487 | [ 1.015298] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4) |
| 488 | [ 1.016385] ACPI: bus type USB registered |
| 489 | [ 1.016423] usbcore: registered new interface driver usbfs |
| 490 | [ 1.016439] usbcore: registered new interface driver hub |
| 491 | [ 1.016468] usbcore: registered new device driver usb |
| 492 | [ 1.017047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 493 | [ 1.017263] ehci-pci: EHCI PCI platform driver |
| 494 | [ 1.020248] SCSI subsystem initialized |
| 495 | [ 1.023010] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA |
| 496 | [ 1.024001] libata version 3.00 loaded. |
| 497 | [ 1.025922] AVX version of gcm_enc/dec engaged. |
| 498 | [ 1.025926] AES CTR mode by8 optimization enabled |
| 499 | [ 1.048132] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| 500 | [ 1.270264] e1000e 0000:00:19.0 eth0: registered PHC clock |
| 501 | [ 1.270280] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c9:0a:e5 |
| 502 | [ 1.270282] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| 503 | [ 1.270338] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| 504 | [ 1.270624] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| 505 | [ 1.270639] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| 506 | [ 1.270666] ehci-pci 0000:00:1a.0: debug port 2 |
| 507 | [ 1.271517] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| 508 | [ 1.274579] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| 509 | [ 1.274612] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162e000 |
| 510 | [ 1.285581] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| 511 | [ 1.285685] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 512 | [ 1.285689] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 513 | [ 1.285692] usb usb1: Product: EHCI Host Controller |
| 514 | [ 1.285695] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd |
| 515 | [ 1.285697] usb usb1: SerialNumber: 0000:00:1a.0 |
| 516 | [ 1.286102] hub 1-0:1.0: USB hub found |
| 517 | [ 1.286122] hub 1-0:1.0: 3 ports detected |
| 518 | [ 1.286461] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| 519 | [ 1.286471] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| 520 | [ 1.286491] ehci-pci 0000:00:1d.0: debug port 2 |
| 521 | [ 1.290415] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| 522 | [ 1.290442] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf162f000 |
| 523 | [ 1.301592] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| 524 | [ 1.301683] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 525 | [ 1.301687] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 526 | [ 1.301690] usb usb2: Product: EHCI Host Controller |
| 527 | [ 1.301692] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd |
| 528 | [ 1.301694] usb usb2: SerialNumber: 0000:00:1d.0 |
| 529 | [ 1.302051] hub 2-0:1.0: USB hub found |
| 530 | [ 1.302063] hub 2-0:1.0: 3 ports detected |
| 531 | [ 1.302280] ahci 0000:00:1f.2: version 3.0 |
| 532 | [ 1.302599] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| 533 | [ 1.312753] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| 534 | [ 1.312769] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| 535 | [ 1.314103] scsi host0: ahci |
| 536 | [ 1.314289] scsi host1: ahci |
| 537 | [ 1.314453] scsi host2: ahci |
| 538 | [ 1.314621] scsi host3: ahci |
| 539 | [ 1.314785] scsi host4: ahci |
| 540 | [ 1.314954] scsi host5: ahci |
| 541 | [ 1.315058] ata1: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d100 irq 32 |
| 542 | [ 1.315064] ata2: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d180 irq 32 |
| 543 | [ 1.315069] ata3: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d200 irq 32 |
| 544 | [ 1.315072] ata4: DUMMY |
| 545 | [ 1.315074] ata5: DUMMY |
| 546 | [ 1.315076] ata6: DUMMY |
| 547 | [ 1.597609] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| 548 | [ 1.613550] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| 549 | [ 1.625426] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 550 | [ 1.627409] ata1.00: supports DRM functions and may not be fully accessible |
| 551 | [ 1.627524] ata1.00: disabling queued TRIM support |
| 552 | [ 1.627529] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133 |
| 553 | [ 1.627533] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| 554 | [ 1.627831] ata1.00: supports DRM functions and may not be fully accessible |
| 555 | [ 1.627955] ata1.00: disabling queued TRIM support |
| 556 | [ 1.627965] ata1.00: configured for UDMA/133 |
| 557 | [ 1.628697] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 |
| 558 | [ 1.693595] tsc: Refined TSC clocksource calibration: 2494.337 MHz |
| 559 | [ 1.693605] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f4544ecb4, max_idle_ns: 440795257849 ns |
| 560 | [ 1.730329] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| 561 | [ 1.730339] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 562 | [ 1.730973] hub 1-1:1.0: USB hub found |
| 563 | [ 1.731109] hub 1-1:1.0: 6 ports detected |
| 564 | [ 1.746173] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| 565 | [ 1.746182] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 566 | [ 1.746839] hub 2-1:1.0: USB hub found |
| 567 | [ 1.746970] hub 2-1:1.0: 8 ports detected |
| 568 | [ 1.961277] ata2: SATA link down (SStatus 0 SControl 300) |
| 569 | [ 2.001628] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| 570 | [ 2.017603] usb 2-1.3: new full-speed USB device number 3 using ehci-pci |
| 571 | [ 2.018420] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448] |
| 572 | [ 2.095927] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 |
| 573 | [ 2.095937] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 574 | [ 2.095942] usb 1-1.3: Product: Biometric Coprocessor |
| 575 | [ 2.095945] usb 1-1.3: Manufacturer: UPEK |
| 576 | [ 2.108041] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180 |
| 577 | [ 2.108080] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| 578 | [ 2.114179] usb 2-1.3: string descriptor 0 read error: -22 |
| 579 | [ 2.114257] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006 |
| 580 | [ 2.114262] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 581 | [ 2.165632] usb 1-1.6: new high-speed USB device number 4 using ehci-pci |
| 582 | [ 2.165840] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| 583 | [ 2.185613] usb 2-1.4: new high-speed USB device number 4 using ehci-pci |
| 584 | [ 2.264623] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 |
| 585 | [ 2.264633] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 586 | [ 2.264638] usb 1-1.6: Product: Integrated Camera |
| 587 | [ 2.264642] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| 588 | [ 2.273035] ata3: SATA link down (SStatus 0 SControl 300) |
| 589 | [ 2.280255] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| 590 | [ 2.280536] sd 0:0:0:0: [sda] Write Protect is off |
| 591 | [ 2.280555] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 592 | [ 2.280630] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 593 | [ 2.283122] sda: sda1 sda2 |
| 594 | [ 2.283957] sd 0:0:0:0: [sda] Attached SCSI disk |
| 595 | [ 2.292722] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=190d |
| 596 | [ 2.292733] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 597 | [ 2.292747] usb 2-1.4: Product: F5521gw |
| 598 | [ 2.292750] usb 2-1.4: Manufacturer: Ericsson |
| 599 | [ 2.292754] usb 2-1.4: SerialNumber: 1B6D288CB004B6B0 |
| 600 | [ 2.370648] device-mapper: uevent: version 1.0.3 |
| 601 | [ 2.370796] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com |
| 602 | [ 2.401550] usb 2-1.5: new full-speed USB device number 5 using ehci-pci |
| 603 | [ 2.496099] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6 |
| 604 | [ 2.496102] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 605 | [ 2.496104] usb 2-1.5: Product: ISD-V4 |
| 606 | [ 2.496105] usb 2-1.5: Manufacturer: Tablet |
| 607 | [ 2.498331] hidraw: raw HID events driver (C) Jiri Kosina |
| 608 | [ 2.509619] usbcore: registered new interface driver usbhid |
| 609 | [ 2.509621] usbhid: USB HID core driver |
| 610 | [ 2.510517] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input4 |
| 611 | [ 2.510595] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0 |
| 612 | [ 2.510832] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input8 |
| 613 | [ 2.510894] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1 |
| 614 | [ 2.693643] clocksource: Switched to clocksource tsc |
| 615 | [ 2.990548] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| 616 | [ 3.282185] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| 617 | [ 5.085707] NET: Registered protocol family 38 |
| 618 | [ 8.409775] raid6: sse2x1 gen() 6878 MB/s |
| 619 | [ 8.477777] raid6: sse2x1 xor() 6239 MB/s |
| 620 | [ 8.545777] raid6: sse2x2 gen() 10592 MB/s |
| 621 | [ 8.613782] raid6: sse2x2 xor() 7676 MB/s |
| 622 | [ 8.681783] raid6: sse2x4 gen() 12299 MB/s |
| 623 | [ 8.749788] raid6: sse2x4 xor() 9109 MB/s |
| 624 | [ 8.749789] raid6: using algorithm sse2x4 gen() 12299 MB/s |
| 625 | [ 8.749790] raid6: .... xor() 9109 MB/s, rmw enabled |
| 626 | [ 8.749791] raid6: using ssse3x2 recovery algorithm |
| 627 | [ 8.749955] xor: automatically using best checksumming function: |
| 628 | [ 8.789785] avx : 21047.000 MB/sec |
| 629 | [ 8.793558] Btrfs loaded |
| 630 | [ 8.800288] BTRFS: device fsid af0b59fd-001b-450c-bce0-009469440833 devid 1 transid 28145 /dev/mapper/cryptdisk |
| 631 | [ 8.807392] BTRFS info (device dm-0): disk space caching is enabled |
| 632 | [ 8.807396] BTRFS: has skinny extents |
| 633 | [ 8.928634] BTRFS: detected SSD devices, enabling SSD mode |
| 634 | [ 9.145443] ip_tables: (C) 2000-2006 Netfilter Core Team |
| 635 | [ 9.162827] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| 636 | [ 9.163053] systemd[1]: Detected architecture x86-64. |
| 637 | [ 9.163411] systemd[1]: Set hostname to <cornaLaptop>. |
| 638 | [ 9.289270] systemd[1]: dm-event.socket: Cannot add dependency job, ignoring: Unit dm-event.socket is masked. |
| 639 | [ 9.289458] systemd[1]: iodined.service: Cannot add dependency job, ignoring: Unit iodined.service is masked. |
| 640 | [ 9.290549] systemd[1]: Listening on Journal Socket (/dev/log). |
| 641 | [ 9.290668] systemd[1]: Listening on udev Kernel Socket. |
| 642 | [ 9.290711] systemd[1]: Listening on RPCbind Server Activation Socket. |
| 643 | [ 9.290897] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 644 | [ 9.290968] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 645 | [ 9.291073] systemd[1]: Listening on Journal Audit Socket. |
| 646 | [ 9.291125] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 647 | [ 9.291174] systemd[1]: Listening on udev Control Socket. |
| 648 | [ 9.291361] systemd[1]: Created slice User and Session Slice. |
| 649 | [ 9.291404] systemd[1]: Listening on Syslog Socket. |
| 650 | [ 9.291425] systemd[1]: Reached target User and Group Name Lookups. |
| 651 | [ 9.291479] systemd[1]: Listening on Journal Socket. |
| 652 | [ 9.291555] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 653 | [ 9.291572] systemd[1]: Reached target Swap. |
| 654 | [ 9.291715] systemd[1]: Created slice System Slice. |
| 655 | [ 9.302149] systemd[1]: Starting Journal Service... |
| 656 | [ 9.302211] systemd[1]: Reached target Slices. |
| 657 | [ 9.303042] systemd[1]: Starting Uncomplicated firewall... |
| 658 | [ 9.305285] systemd[1]: Mounting Debug File System... |
| 659 | [ 9.305418] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. |
| 660 | [ 9.306321] systemd[1]: Mounting Temporary Directory... |
| 661 | [ 9.306550] systemd[1]: Created slice system-getty.slice. |
| 662 | [ 9.311943] systemd[1]: Mounting RPC Pipe File System... |
| 663 | [ 9.313088] systemd[1]: Starting Remount Root and Kernel File Systems... |
| 664 | [ 9.314153] systemd[1]: Mounting Huge Pages File System... |
| 665 | [ 9.317053] systemd[1]: Starting Load Kernel Modules... |
| 666 | [ 9.331055] systemd[1]: Starting Set the console keyboard layout... |
| 667 | [ 9.331645] BTRFS info (device dm-0): use lzo compression |
| 668 | [ 9.331653] BTRFS info (device dm-0): turning on discard |
| 669 | [ 9.331656] BTRFS info (device dm-0): disk space caching is enabled |
| 670 | [ 9.331922] systemd[1]: Mounting POSIX Message Queue File System... |
| 671 | [ 9.341430] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 672 | [ 9.341700] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| 673 | [ 9.343580] systemd[1]: Mounted Debug File System. |
| 674 | [ 9.343647] systemd[1]: Mounted POSIX Message Queue File System. |
| 675 | [ 9.343681] systemd[1]: Mounted Huge Pages File System. |
| 676 | [ 9.343707] systemd[1]: Mounted Temporary Directory. |
| 677 | [ 9.344235] systemd[1]: Started Remount Root and Kernel File Systems. |
| 678 | [ 9.345674] systemd[1]: Starting Load/Save Random Seed... |
| 679 | [ 9.347679] systemd[1]: Starting udev Coldplug all Devices... |
| 680 | [ 9.348293] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| 681 | [ 9.349217] RPC: Registered named UNIX socket transport module. |
| 682 | [ 9.349221] RPC: Registered udp transport module. |
| 683 | [ 9.349224] RPC: Registered tcp transport module. |
| 684 | [ 9.349225] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 685 | [ 9.349638] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 686 | [ 9.350738] systemd[1]: Mounted RPC Pipe File System. |
| 687 | [ 9.356775] lp: driver loaded but no devices found |
| 688 | [ 9.361253] ppdev: user-space parallel port driver |
| 689 | [ 9.361260] systemd[1]: Started Load/Save Random Seed. |
| 690 | [ 9.378988] thinkpad_ec: thinkpad_ec 0.42 loaded. |
| 691 | [ 9.379489] hdaps: LENOVO ThinkPad X220 detected, setting orientation 4 |
| 692 | [ 9.379582] hdaps: initial mode latch is 0x05 |
| 693 | [ 9.379730] hdaps: setting ec_rate=250, filter_order=2 |
| 694 | [ 9.379949] hdaps: device successfully initialized. |
| 695 | [ 9.380034] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input10 |
| 696 | [ 9.380092] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input11 |
| 697 | [ 9.380094] hdaps: driver successfully loaded. |
| 698 | [ 9.380733] systemd[1]: Started Load Kernel Modules. |
| 699 | [ 9.381670] systemd[1]: Starting Apply Kernel Variables... |
| 700 | [ 9.382334] systemd[1]: Started Create Static Device Nodes in /dev. |
| 701 | [ 9.383248] systemd[1]: Starting udev Kernel Device Manager... |
| 702 | [ 9.388631] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) |
| 703 | [ 9.391168] systemd[1]: Started Journal Service. |
| 704 | [ 9.406851] systemd-journald[317]: Received request to flush runtime journal from PID 1 |
| 705 | [ 9.411365] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| 706 | [ 9.485593] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input12 |
| 707 | [ 9.485600] ACPI: Sleep Button [SLPB] |
| 708 | [ 9.485679] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input13 |
| 709 | [ 9.485800] ACPI: Lid Switch [LID] |
| 710 | [ 9.485872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14 |
| 711 | [ 9.485876] ACPI: Power Button [PWRF] |
| 712 | [ 9.493971] ACPI: AC Adapter [AC] (off-line) |
| 713 | [ 9.497879] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| 714 | [ 9.500260] Non-volatile memory driver v1.3 |
| 715 | [ 9.504499] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 716 | [ 9.507983] [drm] Initialized drm 1.1.0 20060810 |
| 717 | [ 9.508162] ACPI: Battery Slot [BAT0] (battery present) |
| 718 | [ 9.508302] ACPI: Battery Slot [BAT1] (battery absent) |
| 719 | [ 9.510370] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| 720 | [ 9.510373] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| 721 | [ 9.510375] thinkpad_acpi: ThinkPad BIOS CBET4000 4.5-260-g3d302b0, EC 8DHT34WW-3.20 |
| 722 | [ 9.510376] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4294CTO |
| 723 | [ 9.513531] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| 724 | [ 9.513534] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| 725 | [ 9.518568] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| 726 | [ 9.518680] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| 727 | [ 9.520303] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15 |
| 728 | [ 9.526613] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 729 | [ 9.529532] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160108/utaddress-255) |
| 730 | [ 9.529543] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 731 | [ 9.529547] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255) |
| 732 | [ 9.529551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 733 | [ 9.529552] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255) |
| 734 | [ 9.529556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 735 | [ 9.529557] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255) |
| 736 | [ 9.529560] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 737 | [ 9.529562] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| 738 | [ 9.536347] [drm] Memory usable by graphics device = 2048M |
| 739 | [ 9.536352] [drm] Replacing VGA console driver |
| 740 | [ 9.536930] Console: switching to colour dummy device 80x25 |
| 741 | [ 9.545231] input: PC Speaker as /devices/platform/pcspkr/input/input16 |
| 742 | [ 9.555023] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing. |
| 743 | [ 9.555519] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker |
| 744 | [ 9.555523] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 745 | [ 9.555525] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| 746 | [ 9.555527] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 |
| 747 | [ 9.555529] snd_hda_codec_conexant hdaudioC0D0: inputs: |
| 748 | [ 9.555531] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 |
| 749 | [ 9.555534] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b |
| 750 | [ 9.555536] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a |
| 751 | [ 9.556836] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication |
| 752 | [ 9.569874] intel_rapl: Found RAPL domain package |
| 753 | [ 9.569877] intel_rapl: Found RAPL domain core |
| 754 | [ 9.569878] intel_rapl: Found RAPL domain uncore |
| 755 | [ 9.579525] ath: phy0: ASPM enabled: 0x43 |
| 756 | [ 9.579529] ath: EEPROM regdomain: 0x6a |
| 757 | [ 9.579531] ath: EEPROM indicates we should expect a direct regpair map |
| 758 | [ 9.579533] ath: Country alpha2 being used: 00 |
| 759 | [ 9.579534] ath: Regpair used: 0x6a |
| 760 | [ 9.593948] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 761 | [ 9.593951] [drm] Driver supports precise vblank timestamp query. |
| 762 | [ 9.594222] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| 763 | [ 9.602520] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| 764 | [ 9.602828] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| 765 | [ 9.602902] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| 766 | [ 9.602976] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 |
| 767 | [ 9.603047] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 |
| 768 | [ 9.603127] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 |
| 769 | [ 9.603205] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 |
| 770 | [ 9.603282] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 |
| 771 | [ 9.635119] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 772 | [ 9.635312] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90000a00000, irq=17 |
| 773 | [ 9.689076] iTCO_vendor_support: vendor-support=0 |
| 774 | [ 9.689785] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| 775 | [ 9.689859] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560) |
| 776 | [ 9.690401] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 777 | [ 9.738073] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| 778 | [ 9.837845] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 |
| 779 | [ 9.985396] snd_hda_codec_conexant hdaudioC0D0: num_steps = 0 for NID=0x13 (ctl = Beep Playback Volume) |
| 780 | [ 9.985722] snd_hda_codec_conexant hdaudioC0D0: num_steps = 0 for NID=0x13 (ctl = Beep Playback Volume) |
| 781 | [ 10.163452] fbcon: inteldrmfb (fb0) is primary device |
| 782 | [ 10.167925] systemd[1]: apt-daily.timer: Adding 10h 32min 34.585082s random time. |
| 783 | [ 10.654913] random: nonblocking pool is initialized |
| 784 | [ 11.115825] Bluetooth: Core ver 2.21 |
| 785 | [ 11.115851] NET: Registered protocol family 31 |
| 786 | [ 11.115852] Bluetooth: HCI device and connection manager initialized |
| 787 | [ 11.115857] Bluetooth: HCI socket layer initialized |
| 788 | [ 11.115860] Bluetooth: L2CAP socket layer initialized |
| 789 | [ 11.115867] Bluetooth: SCO socket layer initialized |
| 790 | [ 11.122659] media: Linux media interface: v0.10 |
| 791 | [ 11.128057] Linux video capture interface: v2.00 |
| 792 | [ 11.179375] usbcore: registered new interface driver btusb |
| 793 | [ 11.182810] usb 2-1.3: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu |
| 794 | [ 11.194554] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217) |
| 795 | [ 11.196580] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| 796 | [ 11.196585] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| 797 | [ 11.196587] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| 798 | [ 11.196815] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input25 |
| 799 | [ 11.196990] usbcore: registered new interface driver uvcvideo |
| 800 | [ 11.196991] USB Video Class driver (1.1.1) |
| 801 | [ 11.222113] usb 2-1.3: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu |
| 802 | [ 11.226524] usbcore: registered new interface driver ath3k |
| 803 | [ 11.276586] usb 2-1.3: USB disconnect, device number 3 |
| 804 | [ 11.367462] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| 805 | [ 11.367474] Console: switching to colour frame buffer device 170x48 |
| 806 | [ 11.474026] usb 2-1.3: new full-speed USB device number 6 using ehci-pci |
| 807 | [ 11.580749] usb 2-1.3: string descriptor 0 read error: -22 |
| 808 | [ 11.580760] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006 |
| 809 | [ 11.580763] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 810 | [ 11.822906] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| 811 | [ 11.824348] acpi device:03: registered as cooling_device5 |
| 812 | [ 11.824604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26 |
| 813 | [ 11.824872] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0 |
| 814 | [ 11.826605] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| 815 | [ 11.884215] systemd[1]: apt-daily.timer: Adding 8h 41min 13.745639s random time. |
| 816 | [ 12.182940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 817 | [ 12.182945] Bluetooth: BNEP filters: protocol multicast |
| 818 | [ 12.182950] Bluetooth: BNEP socket layer initialized |
| 819 | [ 12.439020] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device |
| 820 | [ 12.439090] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device |
| 821 | [ 12.439116] usbcore: registered new interface driver cdc_wdm |
| 822 | [ 12.441146] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device |
| 823 | [ 12.441535] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device |
| 824 | [ 12.447368] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device |
| 825 | [ 12.448289] usbcore: registered new interface driver cdc_acm |
| 826 | [ 12.448293] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| 827 | [ 12.468660] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00 |
| 828 | [ 12.468998] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00 |
| 829 | [ 12.469041] usbcore: registered new interface driver cdc_ncm |
| 830 | [ 12.475559] usbcore: registered new interface driver cdc_mbim |
| 831 | [ 12.477480] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0 |
| 832 | [ 12.500304] Ebtables v2.0 registered |
| 833 | [ 12.521204] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2 |
| 834 | [ 12.521213] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2 |
| 835 | [ 12.521217] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2 |
| 836 | [ 12.521220] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2 |
| 837 | [ 12.521223] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2 |
| 838 | [ 12.631953] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| 839 | [ 12.886187] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| 840 | [ 12.892042] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 841 | [ 12.904421] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 842 | [ 12.919236] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 843 | [ 13.035202] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 844 | [ 13.086770] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. |
| 845 | [ 13.090459] tun: Universal TUN/TAP device driver, 1.6 |
| 846 | [ 13.090463] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| 847 | [ 13.110890] tp_smapi 0.42 loading... |
| 848 | [ 13.110899] SMAPI not supported (ID=0x41) |
| 849 | [ 13.110901] tp_smapi init failed (ret=-6)! |
| 850 | [ 13.146208] virbr0: port 1(virbr0-nic) entered blocking state |
| 851 | [ 13.146212] virbr0: port 1(virbr0-nic) entered disabled state |
| 852 | [ 13.146338] device virbr0-nic entered promiscuous mode |
| 853 | [ 13.191818] acpi_call: Cannot get handle: Error: AE_NOT_FOUND |
| 854 | [ 13.206191] tp_smapi 0.42 loading... |
| 855 | [ 13.206202] SMAPI not supported (ID=0x41) |
| 856 | [ 13.206205] tp_smapi init failed (ret=-6)! |
| 857 | [ 13.260084] acpi_call: Cannot get handle: Error: AE_NOT_FOUND |
| 858 | [ 13.279305] virbr0: port 1(virbr0-nic) entered blocking state |
| 859 | [ 13.279309] virbr0: port 1(virbr0-nic) entered listening state |
| 860 | [ 13.326378] virbr0: port 1(virbr0-nic) entered disabled state |
| 861 | [ 13.425322] systemd[1]: apt-daily.timer: Adding 2h 24min 51.970351s random time. |
| 862 | [ 13.842272] systemd[1]: apt-daily.timer: Adding 8h 47min 54.157384s random time. |
| 863 | [ 13.987092] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes |
| 864 | [ 13.988083] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes |
| 865 | [ 14.743255] Bluetooth: RFCOMM TTY layer initialized |
| 866 | [ 14.743269] Bluetooth: RFCOMM socket layer initialized |
| 867 | [ 14.743278] Bluetooth: RFCOMM ver 1.11 |
| 868 | [ 19.211302] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 869 | [ 19.271461] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 870 | [ 19.289054] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 871 | [ 19.325134] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 872 | [ 19.342407] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 873 | [ 19.358232] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 874 | [ 21.905197] fuse init (API version 7.24) |
| 875 | [ 26.837367] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| 876 | [ 27.150698] wlp2s0: authenticate with 64:f6:9d:c4:5f:6d |
| 877 | [ 27.161695] wlp2s0: send auth to 64:f6:9d:c4:5f:6d (try 1/3) |
| 878 | [ 27.163256] wlp2s0: authenticated |
| 879 | [ 27.178615] wlp2s0: associate with 64:f6:9d:c4:5f:6d (try 1/3) |
| 880 | [ 27.181073] wlp2s0: RX AssocResp from 64:f6:9d:c4:5f:6d (capab=0x111 status=0 aid=141) |
| 881 | [ 27.181215] wlp2s0: associated |
| 882 | [ 27.181227] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| 883 | [ 27.186757] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 64:f6:9d:c4:5f:6d |
| 884 | [ 27.204900] ath: EEPROM regdomain: 0x817c |
| 885 | [ 27.204905] ath: EEPROM indicates we should expect a country code |
| 886 | [ 27.204906] ath: doing EEPROM country->regdmn map search |
| 887 | [ 27.204908] ath: country maps to regdmn code: 0x37 |
| 888 | [ 27.204910] ath: Country alpha2 being used: IT |
| 889 | [ 27.204911] ath: Regpair used: 0x37 |
| 890 | [ 27.204913] ath: regdomain 0x817c dynamically updated by country IE |
| 891 | [ 27.943568] systemd[1]: apt-daily.timer: Adding 6h 48min 58.517932s random time. |
| 892 | [ 28.264165] systemd[1]: apt-daily.timer: Adding 9h 37min 41.768252s random time. |
| 893 | [ 30.777925] ------------[ cut here ]------------ |
| 894 | [ 30.777945] WARNING: CPU: 1 PID: 0 at /build/linux-aOJbQa/linux-4.6.4/net/core/skbuff.c:4271 skb_try_coalesce+0x3f2/0x420 |
| 895 | [ 30.777949] Modules linked in: ctr(E) ccm(E) fuse(E) rfcomm(E) xt_CHECKSUM(E) iptable_mangle(E) ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) iptable_nat(E) nf_nat_ipv4(E) acpi_call(OE) tun(E) bridge(E) stp(E) llc(E) ebtable_filter(E) ebtables(E) cdc_mbim(E) cdc_ncm(E) cdc_acm(E) usbnet(E) mii(E) cdc_wdm(E) cmac(E) ecb(E) bnep(E) ath3k(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) videobuf2_core(E) videodev(E) media(E) btusb(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) crc16(E) cpufreq_userspace(E) cpufreq_stats(E) cpufreq_powersave(E) cpufreq_conservative(E) binfmt_misc(E) iTCO_wdt(E) iTCO_vendor_support(E) arc4(E) snd_hda_codec_hdmi(E) intel_rapl(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) ath9k(E) kvm_intel(E) ath9k_common(E) kvm(E) snd_hda_codec_conexant(E) |
| 896 | [ 30.777998] ath9k_hw(E) irqbypass(E) ath(E) snd_hda_codec_generic(E) pcspkr(E) mac80211(E) serio_raw(E) i2c_i801(E) snd_hda_intel(E) lpc_ich(E) ip6t_REJECT(E) snd_hda_codec(E) mfd_core(E) nf_reject_ipv6(E) sg(E) cfg80211(E) i915(E) nf_log_ipv6(E) snd_hda_core(E) snd_hwdep(E) drm_kms_helper(E) snd_pcm(E) thinkpad_acpi(E) snd_timer(E) drm(E) shpchp(E) i2c_algo_bit(E) nvram(E) xt_hl(E) snd(E) ip6t_rt(E) soundcore(E) rfkill(E) battery(E) ac(E) evdev(E) video(E) tpm_tis(E) button(E) joydev(E) processor(E) nf_conntrack_ipv6(E) nf_defrag_ipv6(E) ipt_REJECT(E) nf_reject_ipv4(E) nf_log_ipv4(E) nf_log_common(E) xt_LOG(E) xt_limit(E) xt_tcpudp(E) xt_addrtype(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) xt_conntrack(E) ip6table_filter(E) ip6_tables(E) nf_conntrack_netbios_ns(E) nf_conntrack_broadcast(E) nf_nat_ftp(E) |
| 897 | [ 30.778049] nf_nat(E) nf_conntrack_ftp(E) nf_conntrack(E) iptable_filter(E) hdaps(OE) thinkpad_ec(OE) tpm_rng(E) tpm(E) rng_core(E) parport_pc(E) ppdev(E) lp(E) parport(E) sunrpc(E) ip_tables(E) x_tables(E) autofs4(E) btrfs(E) crc32c_generic(E) xor(E) raid6_pq(E) algif_skcipher(E) af_alg(E) wacom(E) usbhid(E) hid(E) dm_crypt(E) dm_mod(E) sd_mod(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) ghash_clmulni_intel(E) jitterentropy_rng(E) hmac(E) drbg(E) ansi_cprng(E) aesni_intel(E) aes_x86_64(E) lrw(E) ahci(E) gf128mul(E) glue_helper(E) ablk_helper(E) libahci(E) cryptd(E) libata(E) psmouse(E) scsi_mod(E) ehci_pci(E) ehci_hcd(E) sdhci_pci(E) sdhci(E) mmc_core(E) usbcore(E) e1000e(E) usb_common(E) ptp(E) pps_core(E) thermal(E) fjes(E) |
| 898 | [ 30.778094] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 4.6.0-1-amd64 #1 Debian 4.6.4-1 |
| 899 | [ 30.778097] Hardware name: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.5-260-g3d302b0 11/14/2016 |
| 900 | [ 30.778099] 0000000000000286 4001a6e0bcae6769 ffffffff81311505 0000000000000000 |
| 901 | [ 30.778105] 0000000000000000 ffffffff8107a50e ffff880135aaf200 ffff88009068da00 |
| 902 | [ 30.778108] 00000000000002f1 ffff88013c28394c 00000000000000fb ffff8800b8eca000 |
| 903 | [ 30.778111] Call Trace: |
| 904 | [ 30.778113] <IRQ> [<ffffffff81311505>] ? dump_stack+0x5c/0x77 |
| 905 | [ 30.778123] [<ffffffff8107a50e>] ? __warn+0xbe/0xe0 |
| 906 | [ 30.778125] [<ffffffff814b8922>] ? skb_try_coalesce+0x3f2/0x420 |
| 907 | [ 30.778129] [<ffffffff8151764f>] ? tcp_try_coalesce+0x5f/0xc0 |
| 908 | [ 30.778132] [<ffffffff815181f2>] ? tcp_queue_rcv+0x52/0x120 |
| 909 | [ 30.778135] [<ffffffff8151ec68>] ? tcp_rcv_established+0x448/0x770 |
| 910 | [ 30.778139] [<ffffffff815296b3>] ? tcp_v4_do_rcv+0x133/0x1f0 |
| 911 | [ 30.778143] [<ffffffff8152a7b0>] ? tcp_v4_rcv+0x820/0x9c0 |
| 912 | [ 30.778152] [<ffffffffc04b4b54>] ? ipv4_confirm+0x74/0xf0 [nf_conntrack_ipv4] |
| 913 | [ 30.778156] [<ffffffff81504dcb>] ? ip_local_deliver_finish+0x8b/0x1c0 |
| 914 | [ 30.778159] [<ffffffff8150509b>] ? ip_local_deliver+0x6b/0xf0 |
| 915 | [ 30.778162] [<ffffffff81504d40>] ? ip_rcv_finish+0x390/0x390 |
| 916 | [ 30.778165] [<ffffffff8150539c>] ? ip_rcv+0x27c/0x3b0 |
| 917 | [ 30.778168] [<ffffffff815049b0>] ? inet_del_offload+0x40/0x40 |
| 918 | [ 30.778172] [<ffffffff814c6eaa>] ? __netif_receive_skb_core+0x50a/0xa40 |
| 919 | [ 30.778175] [<ffffffff814c745f>] ? netif_receive_skb_internal+0x2f/0xa0 |
| 920 | [ 30.778202] [<ffffffffc0986837>] ? ieee80211_deliver_skb+0x137/0x190 [mac80211] |
| 921 | [ 30.778220] [<ffffffffc098871f>] ? ieee80211_rx_handlers+0xa8f/0x24f0 [mac80211] |
| 922 | [ 30.778236] [<ffffffffc098a595>] ? ieee80211_prepare_and_rx_handle+0x1d5/0xaa0 [mac80211] |
| 923 | [ 30.778251] [<ffffffffc098b131>] ? ieee80211_rx_napi+0x2d1/0x860 [mac80211] |
| 924 | [ 30.778258] [<ffffffffc0a1a482>] ? ath_rx_tasklet+0x9d2/0xcc0 [ath9k] |
| 925 | [ 30.778263] [<ffffffffc0a17b36>] ? ath9k_tasklet+0x1b6/0x230 [ath9k] |
| 926 | [ 30.778267] [<ffffffff8107f720>] ? tasklet_action+0xf0/0x100 |
| 927 | [ 30.778271] [<ffffffff815c9278>] ? __do_softirq+0xf8/0x28e |
| 928 | [ 30.778274] [<ffffffff8107fe4b>] ? irq_exit+0x9b/0xa0 |
| 929 | [ 30.778277] [<ffffffff815c8fcf>] ? do_IRQ+0x4f/0xd0 |
| 930 | [ 30.778280] [<ffffffff815c7102>] ? common_interrupt+0x82/0x82 |
| 931 | [ 30.778282] <EOI> [<ffffffff8148f7e5>] ? cpuidle_enter_state+0x115/0x2c0 |
| 932 | [ 30.778288] [<ffffffff8148f7d5>] ? cpuidle_enter_state+0x105/0x2c0 |
| 933 | [ 30.778292] [<ffffffff810bb0a0>] ? cpu_startup_entry+0x290/0x330 |
| 934 | [ 30.778296] [<ffffffff8104e32a>] ? start_secondary+0x15a/0x190 |
| 935 | [ 30.778299] ---[ end trace 2920ea8d40d4229f ]--- |
| 936 | [ 78.239735] wlp2s0: disconnect from AP 64:f6:9d:c4:5f:6d for new auth to 64:f6:9d:f7:f7:4d |
| 937 | [ 78.246629] wlp2s0: authenticate with 64:f6:9d:f7:f7:4d |
| 938 | [ 78.257473] wlp2s0: send auth to 64:f6:9d:f7:f7:4d (try 1/3) |
| 939 | [ 78.258437] wlp2s0: authenticated |
| 940 | [ 78.264693] wlp2s0: associate with 64:f6:9d:f7:f7:4d (try 1/3) |
| 941 | [ 78.269949] wlp2s0: RX AssocResp from 64:f6:9d:f7:f7:4d (capab=0x111 status=0 aid=22) |
| 942 | [ 78.270090] wlp2s0: associated |
| 943 | [ 78.277643] ath: EEPROM regdomain: 0x817c |
| 944 | [ 78.277651] ath: EEPROM indicates we should expect a country code |
| 945 | [ 78.277656] ath: doing EEPROM country->regdmn map search |
| 946 | [ 78.277660] ath: country maps to regdmn code: 0x37 |
| 947 | [ 78.277664] ath: Country alpha2 being used: IT |
| 948 | [ 78.277667] ath: Regpair used: 0x37 |
| 949 | [ 78.277672] ath: regdomain 0x817c dynamically updated by country IE |
| 950 | [ 78.293412] wlp2s0: Limiting TX power to 18 dBm as advertised by 64:f6:9d:f7:f7:4d |
| 951 | [ 278.533157] systemd[1]: apt-daily.timer: Adding 4h 36min 53.192242s random time. |
| 952 | [ 278.908460] systemd[1]: apt-daily.timer: Adding 5h 10min 11.472190s random time. |
| 953 | [ 279.148571] systemd[1]: apt-daily.timer: Adding 10h 31min 3.571283s random time. |