blob: 2223fb13fa5135d21b284d99c4b91e4289df6ebc [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: Emulation QEMU x86 q35/ich9/QEMU x86 q35/ich9, BIOS 4.5-1363-ge8ec53a-dirty 03/21/2017
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
39[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
40[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1ee00000-0x1effffff]
42[ 0.000000] [mem 0x1ee00000-0x1effffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1edfffff]
44[ 0.000000] [mem 0x1c000000-0x1edfffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f000000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f0c7000-0x1fe79fff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F07F0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB10E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFB2DC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB1280 001B38 (v01 CORE COREBOOT 00000002 INTL 20160831)
58[ 0.000000] ACPI: FACS 0x000000001FFB1240 000040
59[ 0.000000] ACPI: SSDT 0x000000001FFB2EC0 000068 (v02 CORE COREBOOT 0000002A CORE 0000002A)
60[ 0.000000] ACPI: MCFG 0x000000001FFB2F30 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: TCPA 0x000000001FFB2F70 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: APIC 0x000000001FFB2FB0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: HPET 0x000000001FFB3010 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: Local APIC address 0xfee00000
65[ 0.000000] No NUMA configuration found
66[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
67[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
68[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
69[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
70[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
71[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e000000-ffff88001e7fffff] on node 0
72[ 0.000000] Zone ranges:
73[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
74[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
75[ 0.000000] Normal empty
76[ 0.000000] Movable zone start for each node
77[ 0.000000] Early memory node ranges
78[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
79[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
80[ 0.000000] On node 0 totalpages: 130878
81[ 0.000000] DMA zone: 56 pages used for memmap
82[ 0.000000] DMA zone: 21 pages reserved
83[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
84[ 0.000000] DMA32 zone: 1735 pages used for memmap
85[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
86[ 0.000000] ACPI: PM-Timer IO Port: 0x608
87[ 0.000000] ACPI: Local APIC address 0xfee00000
88[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
89[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
90[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
92[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
93[ 0.000000] ACPI: IRQ0 used by override.
94[ 0.000000] ACPI: IRQ2 used by override.
95[ 0.000000] ACPI: IRQ9 used by override.
96[ 0.000000] Using ACPI (MADT) for SMP configuration information
97[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
98[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
99[ 0.000000] nr_irqs_gsi: 40
100[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
102[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
103[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
104[ 0.000000] Booting paravirtualized kernel on KVM
105[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
106[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001ee00000 s80896 r8192 d21504 u2097152
107[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
108[ 0.000000] pcpu-alloc: [0] 0
109[ 0.000000] KVM setup async PF for cpu 0
110[ 0.000000] kvm-stealtime: cpu 0, msr 1ee0d080
111[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
112[ 0.000000] Policy zone: DMA32
113[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
114[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
115[ 0.000000] AGP: Checking aperture...
116[ 0.000000] AGP: No AGP bridge found
117[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
118[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
119[ 0.000000] Memory: 489580K/523512K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 33932K reserved)
120[ 0.000000] Hierarchical RCU implementation.
121[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
122[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
123[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
124[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
125[ 0.000000] Console: colour VGA+ 80x25
126[ 0.000000] console [ttyS0] enabled
127[ 0.000000] hpet clockevent registered
128[ 0.000000] tsc: Detected 1600.019 MHz processor
129[ 0.008000] Calibrating delay loop (skipped) preset value.. 3200.03 BogoMIPS (lpj=6400076)
130[ 0.009497] pid_max: default: 32768 minimum: 301
131[ 0.012023] ACPI: Core revision 20140424
132[ 0.016774] ACPI: All ACPI Tables successfully acquired
133[ 0.019669] Security Framework initialized
134[ 0.020023] AppArmor: AppArmor disabled by boot time parameter
135[ 0.024008] Yama: disabled by default; enable with sysctl kernel.yama.*
136[ 0.028102] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
137[ 0.032242] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
138[ 0.036116] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.039436] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
140[ 0.040371] Initializing cgroup subsys memory
141[ 0.044016] Initializing cgroup subsys devices
142[ 0.048023] Initializing cgroup subsys freezer
143[ 0.050283] Initializing cgroup subsys net_cls
144[ 0.052019] Initializing cgroup subsys blkio
145[ 0.054200] Initializing cgroup subsys perf_event
146[ 0.056011] Initializing cgroup subsys net_prio
147[ 0.060160] mce: CPU supports 10 MCE banks
148[ 0.062349] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
149Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
150tlb_flushall_shift: -1
151[ 0.081834] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
152[ 0.093863] ftrace: allocating 21614 entries in 85 pages
153[ 0.111022] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
154[ 0.112005] smpboot: CPU0: AMD Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
155[ 0.124000] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms
156[ 0.124000] APIC delta adjusted to PM-Timer: 6255138 (6497617)
157[ 0.124220] Performance Events: Broken PMU hardware detected, using software events only.
158[ 0.128011] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
159[ 0.137686] x86: Booted up 1 node, 1 CPUs
160[ 0.139938] smpboot: Total of 1 processors activated (3200.03 BogoMIPS)
161[ 0.144057] NMI watchdog: disabled (cpu0): hardware events not enabled
162[ 0.147720] devtmpfs: initialized
163[ 0.156914] pinctrl core: initialized pinctrl subsystem
164[ 0.159741] NET: Registered protocol family 16
165[ 0.160288] cpuidle: using governor ladder
166[ 0.164008] cpuidle: using governor menu
167[ 0.166166] ACPI: bus type PCI registered
168[ 0.168005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
169[ 0.172111] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
170[ 0.176007] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
171[ 0.180726] PCI: Using configuration type 1 for base access
172[ 0.185685] ACPI: Added _OSI(Module Device)
173[ 0.187883] ACPI: Added _OSI(Processor Device)
174[ 0.188005] ACPI: Added _OSI(3.0 _SCP Extensions)
175[ 0.192005] ACPI: Added _OSI(Processor Aggregator Device)
176[ 0.203515] ACPI: Interpreter enabled
177[ 0.204010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
178[ 0.209122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
179[ 0.213102] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
180[ 0.218600] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
181[ 0.222639] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
182[ 0.228005] ACPI: (supports S0)
183[ 0.229558] ACPI: Using IOAPIC for interrupt routing
184[ 0.232068] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
185[ 0.241894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
186[ 0.244014] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
187[ 0.248507] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
188[ 0.252239] PCI host bridge to bus 0000:00
189[ 0.254198] pci_bus 0000:00: root bus resource [bus 00-ff]
190[ 0.256009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
191[ 0.260009] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
192[ 0.262912] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
193[ 0.264008] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
194[ 0.268099] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
195[ 0.268983] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
196[ 0.276007] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
197[ 0.280007] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
198[ 0.308009] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
199[ 0.308403] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
200[ 0.314605] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
201[ 0.320006] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
202[ 0.344007] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
203[ 0.344909] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
204[ 0.345908] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
205[ 0.348055] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
206[ 0.352510] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
207[ 0.376007] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
208[ 0.382472] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
209[ 0.388428] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
210[ 0.388947] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
211[ 0.390185] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
212[ 0.393188] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
213[ 0.397014] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
214[ 0.400398] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
215[ 0.403812] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
216[ 0.405159] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
217[ 0.409156] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
218[ 0.413168] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
219[ 0.416997] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
220[ 0.420254] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
221[ 0.423067] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
222[ 0.424473] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
223[ 0.428477] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
224[ 0.431219] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
225[ 0.432472] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
226[ 0.436497] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
227[ 0.440657] ACPI: Enabled 16 GPEs in block 00 to 3F
228[ 0.443500] vgaarb: setting as boot device: PCI:0000:00:01.0
229[ 0.444000] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
230[ 0.444005] vgaarb: loaded
231[ 0.445386] vgaarb: bridge control possible 0000:00:01.0
232[ 0.448129] PCI: Using ACPI for IRQ routing
233[ 0.607909] PCI: pci_cache_line_size set to 64 bytes
234[ 0.608166] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
235[ 0.608171] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
236[ 0.608503] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
237[ 0.612047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
238[ 0.614723] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
239[ 0.621201] Switched to clocksource kvm-clock
240[ 0.638351] pnp: PnP ACPI init
241[ 0.640013] ACPI: bus type PNP registered
242[ 0.642304] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
243[ 0.642474] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
244[ 0.642649] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
245[ 0.642972] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
246[ 0.643199] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
247[ 0.644254] pnp: PnP ACPI: found 5 devices
248[ 0.646322] ACPI: bus type PNP unregistered
249[ 0.657982] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
250[ 0.660604] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
251[ 0.660609] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
252[ 0.660614] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
253[ 0.660618] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
254[ 0.660672] NET: Registered protocol family 2
255[ 0.662812] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
256[ 0.665650] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
257[ 0.668211] TCP: Hash tables configured (established 4096 bind 4096)
258[ 0.670706] TCP: reno registered
259[ 0.672049] UDP hash table entries: 256 (order: 1, 8192 bytes)
260[ 0.674418] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
261[ 0.677003] NET: Registered protocol family 1
262[ 0.678848] pci 0000:00:01.0: Video device with shadowed ROM
263[ 0.678962] PCI: CLS 64 bytes, default 64
264[ 0.679039] Unpacking initramfs...
265[ 1.204653] Freeing initrd memory: 14028K (ffff88001f0c7000 - ffff88001fe7a000)
266[ 1.208130] microcode: AMD CPU family 0x6 not supported
267[ 1.210916] futex hash table entries: 256 (order: 2, 16384 bytes)
268[ 1.213587] audit: initializing netlink subsys (disabled)
269[ 1.215773] audit: type=2000 audit(1490137821.527:1): initialized
270[ 1.218658] HugeTLB registered 2 MB page size, pre-allocated 0 pages
271[ 1.221179] zbud: loaded
272[ 1.222401] VFS: Disk quotas dquot_6.5.2
273[ 1.223972] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
274[ 1.226652] msgmni has been set to 983
275[ 1.228678] alg: No test for stdrng (krng)
276[ 1.230357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
277[ 1.233382] io scheduler noop registered
278[ 1.234957] io scheduler deadline registered
279[ 1.236753] io scheduler cfq registered (default)
280[ 1.238806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
281[ 1.241085] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
282[ 1.243772] GHES: HEST is not enabled!
283[ 1.245454] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
284[ 1.288423] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
285[ 1.292007] Linux agpgart interface v0.103
286[ 1.293880] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
287[ 1.298830] serio: i8042 KBD port at 0x60,0x64 irq 1
288[ 1.300888] serio: i8042 AUX port at 0x60,0x64 irq 12
289[ 1.303278] mousedev: PS/2 mouse device common for all mice
290[ 1.306369] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
291[ 1.310002] rtc_cmos 00:00: RTC can wake from S4
292[ 1.312834] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
293[ 1.315655] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
294[ 1.318753] ledtrig-cpu: registered to indicate activity on CPUs
295[ 1.321404] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
296[ 1.323955] AMD IOMMUv2 functionality not available on this system
297[ 1.326640] TCP: cubic registered
298[ 1.327995] NET: Registered protocol family 10
299[ 1.330104] mip6: Mobile IPv6
300[ 1.331497] NET: Registered protocol family 17
301[ 1.333810] mpls_gso: MPLS GSO support
302[ 1.336240] registered taskstats version 1
303[ 1.338925] rtc_cmos 00:00: setting system clock to 2017-03-21 23:10:22 UTC (1490137822)
304[ 1.343048] PM: Hibernation image not present or could not be loaded.
305[ 1.345636] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
306[ 1.349560] Write protecting the kernel read-only data: 8192k
307[ 1.359017] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
308[ 1.364456] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
309[ 1.388235] systemd-udevd[52]: starting version 215
310[ 1.391266] random: systemd-udevd urandom read with 3 bits of entropy available
311[ 1.414571] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
312[ 1.418140] e1000: Copyright (c) 1999-2006 Intel Corporation.
313[ 1.425656] Floppy drive(s): fd0 is 1.44M
314[ 1.432008] SCSI subsystem initialized
315[ 1.441021] FDC 0 is a S82078B
316[ 1.449885] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
317[ 1.475773] libata version 3.00 loaded.
318[ 1.889388] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
319[ 1.892770] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
320[ 1.896088] ahci 0000:00:1f.2: version 3.0
321[ 1.896778] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
322[ 1.899941] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
323[ 1.902029] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
324[ 1.906127] ahci 0000:00:1f.2: flags: ncq only
325[ 1.911649] scsi0 : ahci
326[ 1.913236] scsi1 : ahci
327[ 1.914773] scsi2 : ahci
328[ 1.916345] scsi3 : ahci
329[ 1.917892] scsi4 : ahci
330[ 1.919428] scsi5 : ahci
331[ 1.920959] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
332[ 1.924651] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
333[ 1.928284] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
334[ 1.931904] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
335[ 1.935599] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
336[ 1.939296] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
337[ 2.204262] tsc: Refined TSC clocksource calibration: 1600.061 MHz
338[ 2.260638] ata1: SATA link down (SStatus 0 SControl 300)
339[ 2.265196] ata4: SATA link down (SStatus 0 SControl 300)
340[ 2.270468] ata3: SATA link down (SStatus 0 SControl 300)
341[ 2.275222] ata5: SATA link down (SStatus 0 SControl 300)
342[ 2.279592] ata2: SATA link down (SStatus 0 SControl 300)
343[ 2.282603] ata6: SATA link down (SStatus 0 SControl 300)
344[ 2.315300] FS-Cache: Loaded
345[ 2.323311] RPC: Registered named UNIX socket transport module.
346[ 2.326323] RPC: Registered udp transport module.
347[ 2.328695] RPC: Registered tcp transport module.
348[ 2.331020] RPC: Registered tcp NFSv4.1 backchannel transport module.
349[ 2.342698] FS-Cache: Netfs 'nfs' registered for caching
350[ 2.364681] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
351[ 4.365212] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
352[ 4.370334] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
353[ 4.589960] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
354[ 4.595989] systemd[1]: Detected virtualization 'kvm'.
355[ 4.598032] systemd[1]: Detected architecture 'x86-64'.
356[ 4.646183] systemd[1]: Inserted module 'autofs4'
357[ 4.649685] systemd[1]: Set hostname to <cb-test-tgt>.
358[ 5.024787] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
359[ 5.030767] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
360[ 5.037757] systemd[1]: Expecting device dev-ttyS0.device...
361[ 5.043197] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
362[ 5.046375] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
363[ 5.049396] systemd[1]: Starting Remote File Systems (Pre).
364[ 5.055383] systemd[1]: Reached target Remote File Systems (Pre).
365[ 5.058005] systemd[1]: Starting Encrypted Volumes.
366[ 5.063808] systemd[1]: Reached target Encrypted Volumes.
367[ 5.066015] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
368[ 5.074051] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
369[ 5.077947] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
370[ 5.081268] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
371[ 5.084509] systemd[1]: Starting Paths.
372[ 5.089306] systemd[1]: Reached target Paths.
373[ 5.091064] systemd[1]: Starting Swap.
374[ 5.096154] systemd[1]: Reached target Swap.
375[ 5.097876] systemd[1]: Starting Root Slice.
376[ 5.102879] systemd[1]: Created slice Root Slice.
377[ 5.104762] systemd[1]: Starting Delayed Shutdown Socket.
378[ 5.110566] systemd[1]: Listening on Delayed Shutdown Socket.
379[ 5.112860] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
380[ 5.120167] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
381[ 5.122993] systemd[1]: Starting Journal Socket (/dev/log).
382[ 5.129477] systemd[1]: Listening on Journal Socket (/dev/log).
383[ 5.131845] systemd[1]: Starting udev Kernel Socket.
384[ 5.137306] systemd[1]: Listening on udev Kernel Socket.
385[ 5.139454] systemd[1]: Starting udev Control Socket.
386[ 5.145089] systemd[1]: Listening on udev Control Socket.
387[ 5.147330] systemd[1]: Starting User and Session Slice.
388[ 5.153125] systemd[1]: Created slice User and Session Slice.
389[ 5.155430] systemd[1]: Starting Journal Socket.
390[ 5.160771] systemd[1]: Listening on Journal Socket.
391[ 5.162828] systemd[1]: Starting System Slice.
392[ 5.168216] systemd[1]: Created slice System Slice.
393[ 5.170267] systemd[1]: Starting Increase datagram queue length...
394[ 5.176536] systemd[1]: Starting udev Coldplug all Devices...
395[ 5.194203] systemd[1]: Starting Load Kernel Modules...
396[ 5.272738] systemd[1]: Started Set Up Additional Binary Formats.
397[ 5.278504] systemd[1]: Mounting Debug File System...
398[ 5.291389] systemd[1]: Starting Create list of required static device nodes for the current kernel...
399[ 5.316834] systemd[1]: Mounting POSIX Message Queue File System...
400[ 5.338966] systemd[1]: Mounting Huge Pages File System...
401[ 5.356859] systemd[1]: Starting system-getty.slice.
402[ 5.374177] systemd[1]: Created slice system-getty.slice.
403[ 5.377569] systemd[1]: Starting system-serial\x2dgetty.slice.
404[ 5.388990] systemd[1]: Created slice system-serial\x2dgetty.slice.
405[ 5.392153] systemd[1]: Starting Slices.
406[ 5.397792] systemd[1]: Reached target Slices.
407[ 5.400062] systemd[1]: Starting Remount Root and Kernel File Systems...
408[ 5.413435] systemd[1]: Mounted Huge Pages File System.
409[ 5.426994] systemd[1]: Mounted POSIX Message Queue File System.
410[ 5.436123] systemd[1]: Mounted Debug File System.
411[ 5.443054] systemd[1]: Started Increase datagram queue length.
412[ 5.451972] systemd[1]: Started Load Kernel Modules.
413[ 5.472759] systemd[1]: Started Create list of required static device nodes for the current kernel.
414[ 5.487427] systemd[1]: Started Remount Root and Kernel File Systems.
415[ 5.498059] systemd[1]: Started udev Coldplug all Devices.
416[ 5.567541] systemd[1]: Started Various fixups to make systemd work better on Debian.
417[ 5.571492] systemd[1]: Starting Load/Save Random Seed...
418[ 5.578412] systemd[1]: Starting Create Static Device Nodes in /dev...
419[ 5.592881] systemd[1]: Starting Apply Kernel Variables...
420[ 5.617436] systemd[1]: Mounted Configuration File System.
421[ 5.628744] systemd[1]: Mounted FUSE Control File System.
422[ 5.631686] systemd[1]: Starting Syslog Socket.
423[ 5.659314] systemd[1]: Listening on Syslog Socket.
424[ 5.668317] systemd[1]: Starting Sockets.
425[ 5.680964] systemd[1]: Reached target Sockets.
426[ 5.683951] systemd[1]: Starting Journal Service...
427[ 5.705027] systemd[1]: Started Journal Service.
428[ 5.850896] systemd-udevd[146]: starting version 215
429[ 6.282909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
430[ 6.315574] parport_pc 00:03: reported by Plug and Play ACPI
431[ 6.327395] ACPI: Power Button [PWRF]
432[ 6.332371] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
433[ 6.348574] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
434[ 6.382089] input: PC Speaker as /devices/platform/pcspkr/input/input3
435[ 6.399817] i801_smbus 0000:00:1f.3: Enabling SMBus device
436[ 6.426551] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
437[ 6.452510] [drm] Initialized drm 1.1.0 20060810
438[ 6.541415] ppdev: user-space parallel port driver
439[ 6.552009] iTCO_vendor_support: vendor-support=0
440[ 6.567702] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
441[ 6.571369] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
442[ 6.574355] iTCO_wdt: timeout value out of range, using 30
443[ 6.596504] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
444[ 7.013391] Key type dns_resolver registered
445[ 7.046381] NFS: Registering the id_resolver key type
446[ 7.052075] Key type id_resolver registered
447[ 7.054081] Key type id_legacy registered
448[ 7.310415] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
449[ 7.368209] systemd-journald[145]: Received request to flush runtime journal from PID 1
450[ 7.396461] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
451[ 7.420032] random: nonblocking pool is initialized
452[ 37.697089] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****