Gitiles
Code Review Sign In
review.coreboot.org / board-status / 2bc4cf352d833fde840581b0ce9e7b7a63504e18 / . / emulation / qemu-q35 / 4.0-9651-gcc4d309 / 2015-05-12T05:12:07Z / kernel_log.txt
blob: 322f589a5fe8a23ca27f3edfcf947ef17a38be5f [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffaffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffb0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9559-g3905cae-dirty 04/30/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffb0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f5fffff]
42[ 0.000000] [mem 0x1f400000-0x1f5fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f3fffff]
44[ 0.000000] [mem 0x1c000000-0x1f3fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f600000-0x1ffaffff]
49[ 0.000000] [mem 0x1f600000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ffaffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f602000-0x1fe8bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EB0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: APIC 0x000000001FFBAED0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: HPET 0x000000001FFBAF30 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: Local APIC address 0xfee00000
63[ 0.000000] No NUMA configuration found
64[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffaffff]
65[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffaffff]
66[ 0.000000] NODE_DATA [mem 0x1ffab000-0x1ffaffff]
67[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
68[ 0.000000] kvm-clock: cpu 0, msr 0:1ffa3001, primary cpu clock
69[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e600000-ffff88001edfffff] on node 0
70[ 0.000000] Zone ranges:
71[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
72[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
73[ 0.000000] Normal empty
74[ 0.000000] Movable zone start for each node
75[ 0.000000] Early memory node ranges
76[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
77[ 0.000000] node 0: [mem 0x00100000-0x1ffaffff]
78[ 0.000000] On node 0 totalpages: 130894
79[ 0.000000] DMA zone: 56 pages used for memmap
80[ 0.000000] DMA zone: 21 pages reserved
81[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
82[ 0.000000] DMA32 zone: 1735 pages used for memmap
83[ 0.000000] DMA32 zone: 126896 pages, LIFO batch:31
84[ 0.000000] ACPI: PM-Timer IO Port: 0x608
85[ 0.000000] ACPI: Local APIC address 0xfee00000
86[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
87[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
88[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
89[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
91[ 0.000000] ACPI: IRQ0 used by override.
92[ 0.000000] ACPI: IRQ2 used by override.
93[ 0.000000] ACPI: IRQ9 used by override.
94[ 0.000000] Using ACPI (MADT) for SMP configuration information
95[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
96[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
97[ 0.000000] nr_irqs_gsi: 40
98[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
99[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
101[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
102[ 0.000000] Booting paravirtualized kernel on KVM
103[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
104[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f400000 s80896 r8192 d21504 u2097152
105[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
106[ 0.000000] pcpu-alloc: [0] 0
107[ 0.000000] KVM setup async PF for cpu 0
108[ 0.000000] kvm-stealtime: cpu 0, msr 1f40d080
109[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129082
110[ 0.000000] Policy zone: DMA32
111[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
112[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
113[ 0.000000] AGP: Checking aperture...
114[ 0.000000] AGP: No AGP bridge found
115[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
116[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
117[ 0.000000] Memory: 494932K/523576K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
118[ 0.000000] Hierarchical RCU implementation.
119[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
120[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
121[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
122[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
123[ 0.000000] Console: colour VGA+ 80x25
124[ 0.000000] console [tty0] enabled
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008017] ACPI: Core revision 20140424
131[ 0.012107] ACPI: All ACPI Tables successfully acquired
132[ 0.013881] Security Framework initialized
133[ 0.015182] AppArmor: AppArmor disabled by boot time parameter
134[ 0.016004] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.017604] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.020206] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.021880] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.023451] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.024299] Initializing cgroup subsys memory
140[ 0.025505] Initializing cgroup subsys devices
141[ 0.026718] Initializing cgroup subsys freezer
142[ 0.028008] Initializing cgroup subsys net_cls
143[ 0.029192] Initializing cgroup subsys blkio
144[ 0.030374] Initializing cgroup subsys perf_event
145[ 0.032006] Initializing cgroup subsys net_prio
146[ 0.033314] mce: CPU supports 10 MCE banks
147[ 0.034590] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.048059] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.054653] ftrace: allocating 21601 entries in 85 pages
152[ 0.068696] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.070224] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
154[ 0.076000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.076000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.078137] x86: Booted up 1 node, 1 CPUs
157[ 0.079278] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.080579] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.082287] devtmpfs: initialized
160[ 0.090464] pinctrl core: initialized pinctrl subsystem
161[ 0.091890] NET: Registered protocol family 16
162[ 0.092179] cpuidle: using governor ladder
163[ 0.093325] cpuidle: using governor menu
164[ 0.094677] ACPI: bus type PCI registered
165[ 0.096004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.097644] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.100004] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.102165] PCI: Using configuration type 1 for base access
169[ 0.105071] ACPI: Added _OSI(Module Device)
170[ 0.106336] ACPI: Added _OSI(Processor Device)
171[ 0.108003] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.109232] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.114575] ACPI: Interpreter enabled
174[ 0.115695] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.117798] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.120003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.122526] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.125797] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.128011] ACPI: (supports S0)
180[ 0.128969] ACPI: Using IOAPIC for interrupt routing
181[ 0.130262] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.134779] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.136011] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.138434] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.140125] PCI host bridge to bus 0000:00
186[ 0.141314] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.144013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.145443] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.146899] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.148013] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.149585] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.150032] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.153637] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.157537] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.170577] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.170805] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.173260] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.176006] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.188015] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.188555] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.189004] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.192033] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.193797] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.205152] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.207436] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.209568] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.209797] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.210372] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.213324] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.216129] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.218167] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.220140] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.222166] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.224151] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.226161] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.228070] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.229611] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.231179] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.232738] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.234330] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.236012] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.237552] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.239151] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.241041] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.242777] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.244000] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.244012] vgaarb: loaded
228[ 0.248011] vgaarb: bridge control possible 0000:00:01.0
229[ 0.249792] PCI: Using ACPI for IRQ routing
230[ 0.304852] PCI: pci_cache_line_size set to 64 bytes
231[ 0.304970] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.304973] e820: reserve RAM buffer [mem 0x1ffb0000-0x1fffffff]
233[ 0.305198] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.306908] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.308788] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.315318] Switched to clocksource kvm-clock
237[ 0.322796] pnp: PnP ACPI init
238[ 0.324102] ACPI: bus type PNP registered
239[ 0.325877] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.325969] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.326038] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.326194] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.326292] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.326709] pnp: PnP ACPI: found 5 devices
245[ 0.328057] ACPI: bus type PNP unregistered
246[ 0.336920] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.338496] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.338499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.338501] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.338503] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.338543] NET: Registered protocol family 2
252[ 0.339996] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.341679] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.343250] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.344797] TCP: reno registered
256[ 0.345815] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.347265] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.348802] NET: Registered protocol family 1
259[ 0.350022] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.350081] PCI: CLS 64 bytes, default 64
261[ 0.350146] Unpacking initramfs...
262[ 0.553415] Freeing initrd memory: 8744K (ffff88001f602000 - ffff88001fe8c000)
263[ 0.555726] microcode: AMD CPU family 0x6 not supported
264[ 0.557488] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.559517] audit: initializing netlink subsys (disabled)
266[ 0.561029] audit: type=2000 audit(1431424113.964:1): initialized
267[ 0.563241] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.564852] zbud: loaded
269[ 0.565939] VFS: Disk quotas dquot_6.5.2
270[ 0.567131] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.568753] msgmni has been set to 983
272[ 0.570402] alg: No test for stdrng (krng)
273[ 0.571788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.573916] io scheduler noop registered
275[ 0.575079] io scheduler deadline registered
276[ 0.576272] io scheduler cfq registered (default)
277[ 0.577600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.579032] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.580703] GHES: HEST is not enabled!
280[ 0.581870] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.902665] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.905402] Linux agpgart interface v0.103
283[ 0.906709] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.909943] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.911296] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.913073] mousedev: PS/2 mouse device common for all mice
287[ 0.914908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.917508] rtc_cmos 00:00: RTC can wake from S4
289[ 0.919515] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.921836] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.924052] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.926116] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.927649] AMD IOMMUv2 functionality not available on this system
294[ 0.929285] TCP: cubic registered
295[ 0.930428] NET: Registered protocol family 10
296[ 0.932077] mip6: Mobile IPv6
297[ 0.933066] NET: Registered protocol family 17
298[ 0.934489] mpls_gso: MPLS GSO support
299[ 0.936142] registered taskstats version 1
300[ 0.937840] rtc_cmos 00:00: setting system clock to 2015-05-12 09:48:34 UTC (1431424114)
301[ 0.940144] PM: Hibernation image not present or could not be loaded.
302[ 0.941954] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
303[ 0.944219] Write protecting the kernel read-only data: 8192k
304[ 0.948470] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
305[ 0.951452] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.964243] systemd-udevd[52]: starting version 215
307[ 0.965944] random: systemd-udevd urandom read with 2 bits of entropy available
308[ 0.982813] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 0.984565] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 0.990166] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
311[ 1.375286] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
312[ 1.376988] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
313[ 1.385738] FS-Cache: Loaded
314[ 1.390443] RPC: Registered named UNIX socket transport module.
315[ 1.391986] RPC: Registered udp transport module.
316[ 1.393248] RPC: Registered tcp transport module.
317[ 1.394504] RPC: Registered tcp NFSv4.1 backchannel transport module.
318[ 1.400664] FS-Cache: Netfs 'nfs' registered for caching
319[ 1.411882] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
320[ 1.552067] tsc: Refined TSC clocksource calibration: 2312.026 MHz
321[ 3.416865] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
322[ 3.421921] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
323[ 8.975627] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
324[ 8.980517] systemd[1]: Detected virtualization 'kvm'.
325[ 8.981826] systemd[1]: Detected architecture 'x86-64'.
326[ 11.360941] random: nonblocking pool is initialized
327[ 11.925439] systemd[1]: Inserted module 'autofs4'
328[ 11.948513] systemd[1]: Set hostname to <cb-test-tgt>.
329[ 14.446467] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 14.451973] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 14.456933] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
332[ 14.460142] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
333[ 14.463222] systemd[1]: Expecting device dev-ttyS0.device...
334[ 14.466436] systemd[1]: Starting Remote File Systems (Pre).
335[ 14.469783] systemd[1]: Reached target Remote File Systems (Pre).
336[ 14.471322] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
337[ 14.473941] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
338[ 14.476295] systemd[1]: Starting Paths.
339[ 14.479069] systemd[1]: Reached target Paths.
340[ 14.480591] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
341[ 14.484812] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
342[ 14.487260] systemd[1]: Starting Encrypted Volumes.
343[ 14.490348] systemd[1]: Reached target Encrypted Volumes.
344[ 14.492041] systemd[1]: Starting Swap.
345[ 14.494346] systemd[1]: Reached target Swap.
346[ 14.495554] systemd[1]: Starting Root Slice.
347[ 14.498399] systemd[1]: Created slice Root Slice.
348[ 14.500049] systemd[1]: Starting User and Session Slice.
349[ 14.503140] systemd[1]: Created slice User and Session Slice.
350[ 14.504661] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
351[ 14.509709] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
352[ 14.511321] systemd[1]: Starting Delayed Shutdown Socket.
353[ 14.514327] systemd[1]: Listening on Delayed Shutdown Socket.
354[ 14.515775] systemd[1]: Starting Journal Socket (/dev/log).
355[ 14.519907] systemd[1]: Listening on Journal Socket (/dev/log).
356[ 14.521400] systemd[1]: Starting udev Control Socket.
357[ 14.524107] systemd[1]: Listening on udev Control Socket.
358[ 14.525485] systemd[1]: Starting udev Kernel Socket.
359[ 14.528172] systemd[1]: Listening on udev Kernel Socket.
360[ 14.529511] systemd[1]: Starting Journal Socket.
361[ 14.532116] systemd[1]: Listening on Journal Socket.
362[ 14.533405] systemd[1]: Starting System Slice.
363[ 14.535888] systemd[1]: Created slice System Slice.
364[ 14.537213] systemd[1]: Starting system-getty.slice.
365[ 14.539991] systemd[1]: Created slice system-getty.slice.
366[ 14.541407] systemd[1]: Starting system-serial\x2dgetty.slice.
367[ 14.544321] systemd[1]: Created slice system-serial\x2dgetty.slice.
368[ 14.545812] systemd[1]: Starting Increase datagram queue length...
369[ 14.549072] systemd[1]: Mounting Huge Pages File System...
370[ 14.552872] systemd[1]: Mounting POSIX Message Queue File System...
371[ 14.568290] systemd[1]: Starting Create list of required static device nodes for the current kernel...
372[ 14.573949] systemd[1]: Mounting Debug File System...
373[ 14.858066] systemd[1]: Started Set Up Additional Binary Formats.
374[ 16.874609] systemd[1]: Starting Load Kernel Modules...
375[ 16.882675] systemd[1]: Starting udev Coldplug all Devices...
376[ 16.890473] systemd[1]: Starting Slices.
377[ 16.893650] systemd[1]: Reached target Slices.
378[ 16.895869] systemd[1]: Starting Remount Root and Kernel File Systems...
379[ 16.902260] systemd[1]: Started Increase datagram queue length.
380[ 16.906848] systemd[1]: Started Create list of required static device nodes for the current kernel.
381[ 16.930662] systemd[1]: Starting Create Static Device Nodes in /dev...
382[ 16.935211] systemd[1]: Starting Syslog Socket.
383[ 16.938646] systemd[1]: Listening on Syslog Socket.
384[ 16.940164] systemd[1]: Starting Sockets.
385[ 16.942959] systemd[1]: Reached target Sockets.
386[ 16.945136] systemd[1]: Starting Journal Service...
387[ 16.951008] systemd[1]: Started Journal Service.
388[ 20.196096] systemd-udevd[126]: starting version 215
389[ 20.205748] systemd-journald[113]: Received request to flush runtime journal from PID 1
390[ 28.496095] nfs: server 10.100.1.1 not responding, still trying
391[ 28.804089] nfs: server 10.100.1.1 not responding, still trying
392[ 29.476064] nfs: server 10.100.1.1 not responding, still trying
393[ 29.478409] nfs: server 10.100.1.1 not responding, still trying
394[ 29.481045] nfs: server 10.100.1.1 not responding, still trying
395[ 29.483649] nfs: server 10.100.1.1 not responding, still trying
396[ 29.486288] nfs: server 10.100.1.1 not responding, still trying
397[ 29.488192] nfs: server 10.100.1.1 not responding, still trying
398[ 29.490207] nfs: server 10.100.1.1 not responding, still trying
399[ 29.492235] nfs: server 10.100.1.1 not responding, still trying
400[ 29.493637] nfs: server 10.100.1.1 not responding, still trying
401[ 29.495273] nfs: server 10.100.1.1 not responding, still trying
402[ 29.497283] nfs: server 10.100.1.1 not responding, still trying
403[ 29.499198] nfs: server 10.100.1.1 not responding, still trying
404[ 29.501016] nfs: server 10.100.1.1 not responding, still trying
405[ 30.656092] nfs: server 10.100.1.1 not responding, still trying
406[ 30.712084] nfs: server 10.100.1.1 not responding, still trying
407[ 30.715179] nfs: server 10.100.1.1 not responding, still trying
408[ 30.718851] nfs: server 10.100.1.1 not responding, still trying
409[ 30.722637] nfs: server 10.100.1.1 not responding, still trying
410[ 30.725036] nfs: server 10.100.1.1 not responding, still trying
411[ 30.727590] nfs: server 10.100.1.1 not responding, still trying
412[ 30.730311] nfs: server 10.100.1.1 not responding, still trying
413[ 30.732856] nfs: server 10.100.1.1 not responding, still trying
414[ 31.561982] nfs: server 10.100.1.1 OK
415[ 31.654858] nfs: server 10.100.1.1 OK
416[ 31.657697] nfs: server 10.100.1.1 OK
417[ 31.739898] nfs: server 10.100.1.1 OK
418[ 31.815696] nfs: server 10.100.1.1 OK
419[ 31.901124] nfs: server 10.100.1.1 OK
420[ 31.988884] nfs: server 10.100.1.1 OK
421[ 32.070911] nfs: server 10.100.1.1 OK
422[ 32.132236] nfs: server 10.100.1.1 OK
423[ 32.205865] nfs: server 10.100.1.1 OK
424[ 32.265930] nfs: server 10.100.1.1 OK
425[ 32.325099] nfs: server 10.100.1.1 OK
426[ 32.405689] nfs: server 10.100.1.1 OK
427[ 32.463705] nfs: server 10.100.1.1 OK
428[ 32.491534] nfs: server 10.100.1.1 OK
429[ 33.668095] nfs: server 10.100.1.1 not responding, still trying
430[ 35.176493] nfs: server 10.100.1.1 OK
431[ 35.210897] nfs: server 10.100.1.1 OK
432[ 35.265997] nfs: server 10.100.1.1 OK
433[ 35.349005] nfs: server 10.100.1.1 OK
434[ 35.394770] nfs: server 10.100.1.1 OK
435[ 35.462158] nfs: server 10.100.1.1 OK
436[ 35.527517] nfs: server 10.100.1.1 OK
437[ 35.593832] nfs: server 10.100.1.1 OK
438[ 35.681095] nfs: server 10.100.1.1 OK
439[ 35.764250] nfs: server 10.100.1.1 not responding, still trying
440[ 35.856072] nfs: server 10.100.1.1 not responding, still trying
441[ 35.860204] nfs: server 10.100.1.1 not responding, still trying
442[ 35.862594] nfs: server 10.100.1.1 not responding, still trying
443[ 35.865126] nfs: server 10.100.1.1 not responding, still trying
444[ 35.867439] nfs: server 10.100.1.1 not responding, still trying
445[ 35.869979] nfs: server 10.100.1.1 not responding, still trying
446[ 35.871765] nfs: server 10.100.1.1 not responding, still trying
447[ 38.182567] nfs: server 10.100.1.1 OK
448[ 39.240102] nfs: server 10.100.1.1 not responding, still trying
449[ 39.412107] nfs: server 10.100.1.1 not responding, still trying
450[ 39.415461] nfs: server 10.100.1.1 not responding, still trying
451[ 39.418551] nfs: server 10.100.1.1 not responding, still trying
452[ 39.421860] nfs: server 10.100.1.1 not responding, still trying
453[ 39.468096] nfs: server 10.100.1.1 not responding, still trying
454[ 39.471243] nfs: server 10.100.1.1 not responding, still trying
455[ 39.474810] nfs: server 10.100.1.1 not responding, still trying
456[ 39.478100] nfs: server 10.100.1.1 not responding, still trying
457[ 39.481479] nfs: server 10.100.1.1 not responding, still trying
458[ 39.483931] nfs: server 10.100.1.1 not responding, still trying
459[ 39.486089] nfs: server 10.100.1.1 not responding, still trying
460[ 41.262728] nfs: server 10.100.1.1 OK
461[ 42.205472] nfs: server 10.100.1.1 OK
462[ 42.286178] nfs: server 10.100.1.1 OK
463[ 42.343538] nfs: server 10.100.1.1 OK
464[ 42.384098] nfs: server 10.100.1.1 not responding, still trying
465[ 42.428325] nfs: server 10.100.1.1 OK
466[ 42.500987] nfs: server 10.100.1.1 OK
467[ 42.573221] nfs: server 10.100.1.1 OK
468[ 42.600698] nfs: server 10.100.1.1 OK
469[ 44.750045] nfs: server 10.100.1.1 OK
470[ 44.823442] nfs: server 10.100.1.1 OK
471[ 44.825868] nfs: server 10.100.1.1 OK
472[ 44.906125] nfs: server 10.100.1.1 OK
473[ 44.908931] nfs: server 10.100.1.1 OK
474[ 44.929063] nfs: server 10.100.1.1 OK
475[ 44.931180] nfs: server 10.100.1.1 OK
476[ 45.005141] nfs: server 10.100.1.1 OK
477[ 45.108057] nfs: server 10.100.1.1 OK
478[ 45.163951] nfs: server 10.100.1.1 OK
479[ 45.253820] nfs: server 10.100.1.1 OK
480[ 45.325494] nfs: server 10.100.1.1 OK
481[ 45.464200] nfs: server 10.100.1.1 not responding, still trying
482[ 46.408394] nfs: server 10.100.1.1 not responding, still trying
483[ 46.544096] nfs: server 10.100.1.1 not responding, still trying
484[ 46.547767] nfs: server 10.100.1.1 not responding, still trying
485[ 46.551102] nfs: server 10.100.1.1 not responding, still trying
486[ 46.552900] nfs: server 10.100.1.1 not responding, still trying
487[ 46.554683] nfs: server 10.100.1.1 not responding, still trying
488[ 47.495023] nfs: server 10.100.1.1 OK
489[ 49.024106] nfs: server 10.100.1.1 not responding, still trying
490[ 49.112304] nfs: server 10.100.1.1 not responding, still trying
491[ 49.375657] nfs: server 10.100.1.1 OK
492[ 50.202780] nfs: server 10.100.1.1 OK
493[ 50.205436] nfs: server 10.100.1.1 OK
494[ 50.207807] nfs: server 10.100.1.1 OK
495[ 50.209909] nfs: server 10.100.1.1 OK
496[ 50.212137] nfs: server 10.100.1.1 OK
497[ 50.213601] nfs: server 10.100.1.1 OK
498[ 50.891434] nfs: server 10.100.1.1 OK
499[ 50.894245] nfs: server 10.100.1.1 OK
500[ 51.403630] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
501[ 51.409331] ACPI: Power Button [PWRF]
502[ 51.586584] parport_pc 00:03: reported by Plug and Play ACPI
503[ 51.595536] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
504[ 52.726879] [drm] Initialized drm 1.1.0 20060810
505[ 52.731522] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
506[ 53.146476] SCSI subsystem initialized
507[ 53.416677] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
508[ 53.422471] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
509[ 53.425382] i801_smbus 0000:00:1f.3: Enabling SMBus device
510[ 53.427819] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
511[ 54.123752] libata version 3.00 loaded.
512[ 54.285037] input: PC Speaker as /devices/platform/pcspkr/input/input4
513[ 54.559451] Floppy drive(s): fd0 is 1.44M
514[ 54.580998] FDC 0 is a S82078B
515[ 54.697532] ahci 0000:00:1f.2: version 3.0
516[ 54.698349] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
517[ 54.699145] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
518[ 54.703366] ahci 0000:00:1f.2: flags: ncq only
519[ 54.710698] scsi0 : ahci
520[ 54.712139] scsi1 : ahci
521[ 54.713255] scsi2 : ahci
522[ 54.714312] scsi3 : ahci
523[ 54.715397] scsi4 : ahci
524[ 54.716737] scsi5 : ahci
525[ 54.717735] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
526[ 54.719831] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
527[ 54.721934] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
528[ 54.724318] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
529[ 54.726963] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
530[ 54.729162] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
531[ 54.828572] ppdev: user-space parallel port driver
532[ 54.831783] iTCO_vendor_support: vendor-support=0
533[ 55.048303] ata1: SATA link down (SStatus 0 SControl 300)
534[ 55.052663] ata6: SATA link down (SStatus 0 SControl 300)
535[ 55.054248] ata2: SATA link down (SStatus 0 SControl 300)
536[ 55.055841] ata3: SATA link down (SStatus 0 SControl 300)
537[ 55.057386] ata4: SATA link down (SStatus 0 SControl 300)
538[ 55.058912] ata5: SATA link down (SStatus 0 SControl 300)
539[ 55.992126] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
540[ 55.996694] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
541[ 55.999412] iTCO_wdt: timeout value out of range, using 30
542[ 56.002161] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
543[ 56.249024] kvm: Nested Virtualization enabled
544[ 96.710300] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
545[ 268.436066] nfs: server 10.100.1.1 not responding, still trying
546[ 268.438357] nfs: server 10.100.1.1 OK
547[ 268.440604] nfs: server 10.100.1.1 not responding, still trying
548[ 268.442898] nfs: server 10.100.1.1 not responding, still trying
549[ 268.501966] nfs: server 10.100.1.1 OK
550[ 268.515341] nfs: server 10.100.1.1 OK