blob: dde762f9cbb1726ce54ed5960ace92dc6494bf4d [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 12/14/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
27[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
28[ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000140000000 aka 5120M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1b10-0x000f1b1f] mapped at [ffff8800000f1b10]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
40[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
41[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
45[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
46[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
48[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
50[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
54[ 0.000000] [mem 0xbfe00000-0xbff9ffff] page 4k
55[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
56[ 0.000000] ACPI: Early table checksum verification disabled
57[ 0.000000] ACPI: RSDP 0x00000000000F1CB0 000024 (v02 CORE )
58[ 0.000000] ACPI: XSDT 0x00000000BFFB90E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
59[ 0.000000] ACPI: FACP 0x00000000BFFBB8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: DSDT 0x00000000BFFB9280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150619)
61[ 0.000000] ACPI: FACS 0x00000000BFFB9240 000040
62[ 0.000000] ACPI: SSDT 0x00000000BFFBB9D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A)
63[ 0.000000] ACPI: TCPA 0x00000000BFFBC090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: APIC 0x00000000BFFBC0D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: SRAT 0x00000000BFFBC160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: SLIT 0x00000000BFFBC250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: HPET 0x00000000BFFBC280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SRAT 0x00000000BFFBC2C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: SLIT 0x00000000BFFBC3B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: Local APIC address 0xfee00000
71[ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
72[ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
73[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
74[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
75[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
76[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
77[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
78[ 0.000000] NUMA: Initialized distance table, cnt=2
79[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
80[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
81[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
82[ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff]
83[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
84[ 0.000000] Zone ranges:
85[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
86[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
87[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
88[ 0.000000] Movable zone start for each node
89[ 0.000000] Early memory node ranges
90[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
91[ 0.000000] node 0: [mem 0x00100000-0xbff9ffff]
92[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
93[ 0.000000] On node 0 totalpages: 1048382
94[ 0.000000] DMA zone: 56 pages used for memmap
95[ 0.000000] DMA zone: 21 pages reserved
96[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
97[ 0.000000] DMA32 zone: 10695 pages used for memmap
98[ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31
99[ 0.000000] Normal zone: 3584 pages used for memmap
100[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
101[ 0.000000] Detected use of extended apic ids on hypertransport bus
102[ 0.000000] Detected use of extended apic ids on hypertransport bus
103[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
104[ 0.000000] ACPI: Local APIC address 0xfee00000
105[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
106[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
107[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
109[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
110[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
111[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
112[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
113[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
114[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
115[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
116[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
117[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
118[ 0.000000] ACPI: IRQ9 used by override.
119[ 0.000000] ACPI: IRQ14 used by override.
120[ 0.000000] ACPI: IRQ15 used by override.
121[ 0.000000] Using ACPI (MADT) for SMP configuration information
122[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
123[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
124[ 0.000000] nr_irqs_gsi: 40
125[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
127[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbfffffff]
129[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff]
130[ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices
131[ 0.000000] Booting paravirtualized kernel on bare hardware
132[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
133[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
134[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
135[ 0.000000] pcpu-alloc: [0] 0 1 2 3
136[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034026
137[ 0.000000] Policy zone: Normal
138[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
139[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
140[ 0.000000] AGP: Checking aperture...
141[ 0.000000] AGP: No AGP bridge found
142[ 0.000000] AGP: Node 0: aperture [bus addr 0xe380000000-0xe381ffffff] (32MB)
143[ 0.000000] Aperture beyond 4GB. Ignoring.
144[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
145[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
146[ 0.000000] AGP: This costs you 64MB of RAM
147[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
148[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
149[ 0.000000] Memory: 3983824K/4193528K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 209704K reserved)
150[ 0.000000] Hierarchical RCU implementation.
151[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
152[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
153[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
154[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
155[ 0.000000] spurious 8259A interrupt: IRQ7.
156[ 0.000000] Console: colour VGA+ 80x25
157[ 0.000000] console [ttyS0] enabled
158[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
159[ 0.000000] hpet clockevent registered
160[ 0.000000] tsc: Fast TSC calibration using PIT
161[ 0.000000] tsc: Detected 3015.359 MHz processor
162[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
163[ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6030.71 BogoMIPS (lpj=12061436)
164[ 0.020001] pid_max: default: 32768 minimum: 301
165[ 0.024011] ACPI: Core revision 20140424
166[ 0.029307] ACPI: All ACPI Tables successfully acquired
167[ 0.032232] Security Framework initialized
168[ 0.036013] AppArmor: AppArmor disabled by boot time parameter
169[ 0.040001] Yama: disabled by default; enable with sysctl kernel.yama.*
170[ 0.048123] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
171[ 0.057891] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
172[ 0.061262] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
173[ 0.064011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
174[ 0.068350] Initializing cgroup subsys memory
175[ 0.072010] Initializing cgroup subsys devices
176[ 0.076010] Initializing cgroup subsys freezer
177[ 0.080003] Initializing cgroup subsys net_cls
178[ 0.084007] Initializing cgroup subsys blkio
179[ 0.088005] Initializing cgroup subsys perf_event
180[ 0.092003] Initializing cgroup subsys net_prio
181[ 0.096028] tseg: 0000000000
182[ 0.096035] CPU: Physical Processor ID: 0
183[ 0.100002] CPU: Processor Core ID: 0
184[ 0.104002] mce: CPU supports 5 MCE banks
185[ 0.108008] LVT offset 0 assigned for vector 0xf9
186[ 0.112004] process: using AMD E400 aware idle routine
187[ 0.116003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
188Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
189tlb_flushall_shift: 6
190[ 0.120078] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
191[ 0.124696] ftrace: allocating 21601 entries in 85 pages
192[ 0.136434] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
193[ 0.182612] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03)
194[ 0.192000] Performance Events: AMD PMU driver.
195[ 0.192002] ... version: 0
196[ 0.196000] ... bit width: 48
197[ 0.200000] ... generic registers: 4
198[ 0.204000] ... value mask: 0000ffffffffffff
199[ 0.208000] ... max period: 00007fffffffffff
200[ 0.212000] ... fixed-purpose events: 0
201[ 0.216000] ... event mask: 000000000000000f
202[ 0.221571] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
203[ 0.224156] x86: Booting SMP configuration:
204[ 0.228001] .... node #0, CPUs: #1 #2 #3
205[ 0.500030] x86: Booted up 1 node, 4 CPUs
206[ 0.504002] smpboot: Total of 4 processors activated (24123.25 BogoMIPS)
207[ 0.512115] devtmpfs: initialized
208[ 0.521267] pinctrl core: initialized pinctrl subsystem
209[ 0.524096] NET: Registered protocol family 16
210[ 0.528133] cpuidle: using governor ladder
211[ 0.532002] cpuidle: using governor menu
212[ 0.536005] node 0 link 1: io port [1000, 5fff]
213[ 0.536008] TOM: 00000000c0000000 aka 3072M
214[ 0.540002] node 0 link 1: mmio [a0000, bffff]
215[ 0.540004] node 0 link 1: mmio [fc000000, fc5fffff]
216[ 0.540006] node 0 link 1: mmio [f8000000, fbffffff]
217[ 0.540007] TOM2: 0000000140000000 aka 5120M
218[ 0.544002] bus: [bus 00-08] on node 0 link 1
219[ 0.544003] bus: 00 [io 0x0000-0xffff]
220[ 0.544005] bus: 00 [mem 0x000a0000-0x000bffff]
221[ 0.544006] bus: 00 [mem 0xc0000000-0xffffffff]
222[ 0.544007] bus: 00 [mem 0x140000000-0xfcffffffff]
223[ 0.544055] ACPI: bus type PCI registered
224[ 0.548002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
225[ 0.552093] PCI: Using configuration type 1 for base access
226[ 0.572086] ACPI: Added _OSI(Module Device)
227[ 0.576002] ACPI: Added _OSI(Processor Device)
228[ 0.580001] ACPI: Added _OSI(3.0 _SCP Extensions)
229[ 0.584001] ACPI: Added _OSI(Processor Aggregator Device)
230[ 0.592939] ACPI: Interpreter enabled
231[ 0.596009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
232[ 0.604001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
233[ 0.614186] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
234[ 0.624004] ACPI: (supports S0 S1 S5)
235[ 0.627671] ACPI: Using IOAPIC for interrupt routing
236[ 0.628028] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
237[ 0.637314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08])
238[ 0.640006] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
239[ 0.644011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
240[ 0.649571] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
241[ 0.652005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
242[ 0.656117] PCI host bridge to bus 0000:00
243[ 0.660003] pci_bus 0000:00: root bus resource [bus 00-08]
244[ 0.664001] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff]
245[ 0.668001] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
246[ 0.672001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff]
247[ 0.676001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
248[ 0.680001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
249[ 0.684010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
250[ 0.684124] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
251[ 0.684130] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f]
252[ 0.684205] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
253[ 0.684210] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f]
254[ 0.684219] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf]
255[ 0.684223] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff]
256[ 0.684234] pci 0000:00:01.1: PME# supported from D3hot D3cold
257[ 0.684301] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
258[ 0.684306] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff]
259[ 0.684326] pci 0000:00:02.0: supports D1 D2
260[ 0.684328] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
261[ 0.684360] pci 0000:00:02.0: System wakeup disabled by ACPI
262[ 0.688042] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
263[ 0.688048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff]
264[ 0.688073] pci 0000:00:02.1: supports D1 D2
265[ 0.688075] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
266[ 0.688106] pci 0000:00:02.1: System wakeup disabled by ACPI
267[ 0.692045] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
268[ 0.692057] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f]
269[ 0.692064] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
270[ 0.696001] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
271[ 0.700004] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
272[ 0.704001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
273[ 0.708063] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
274[ 0.708069] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057]
275[ 0.708072] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073]
276[ 0.708076] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f]
277[ 0.708079] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077]
278[ 0.708082] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f]
279[ 0.708086] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff]
280[ 0.708150] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
281[ 0.708156] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067]
282[ 0.708159] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b]
283[ 0.708163] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f]
284[ 0.708166] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f]
285[ 0.708169] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f]
286[ 0.708173] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff]
287[ 0.708237] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
288[ 0.708278] pci 0000:00:09.0: System wakeup disabled by ACPI
289[ 0.712041] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
290[ 0.712062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.712093] pci 0000:00:0b.0: System wakeup disabled by ACPI
292[ 0.716042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
293[ 0.716062] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
294[ 0.716092] pci 0000:00:0c.0: System wakeup disabled by ACPI
295[ 0.720041] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
296[ 0.720060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.720091] pci 0000:00:0d.0: System wakeup disabled by ACPI
298[ 0.724041] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
299[ 0.724060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
300[ 0.724092] pci 0000:00:0e.0: System wakeup disabled by ACPI
301[ 0.728046] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
302[ 0.728113] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
303[ 0.728175] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
304[ 0.728235] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
305[ 0.728299] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
306[ 0.728366] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
307[ 0.728427] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
308[ 0.728488] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
309[ 0.728586] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
310[ 0.728595] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
311[ 0.728601] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff]
312[ 0.728606] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f]
313[ 0.728636] pci 0000:01:04.0: supports D1 D2
314[ 0.728688] pci 0000:00:09.0: PCI bridge to [bus 01]
315[ 0.732002] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
316[ 0.732005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
317[ 0.732007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
318[ 0.732057] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
319[ 0.732069] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit]
320[ 0.732092] pci 0000:02:00.0: reg 0x30: [mem 0x0d480000-0x0d48ffff pref]
321[ 0.732132] pci 0000:02:00.0: PME# supported from D3hot D3cold
322[ 0.732184] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
323[ 0.736007] pci 0000:00:0b.0: PCI bridge to [bus 02]
324[ 0.740003] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff]
325[ 0.740053] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
326[ 0.740065] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit]
327[ 0.740126] pci 0000:03:00.0: PME# supported from D3hot D3cold
328[ 0.740177] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
329[ 0.744005] pci 0000:00:0c.0: PCI bridge to [bus 03]
330[ 0.748003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff]
331[ 0.748041] pci 0000:00:0d.0: PCI bridge to [bus 04]
332[ 0.752046] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400
333[ 0.752087] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
334[ 0.752133] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
335[ 0.756005] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
336[ 0.760002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff]
337[ 0.760004] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff]
338[ 0.760049] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400
339[ 0.760098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
340[ 0.760145] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
341[ 0.764008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400
342[ 0.768038] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
343[ 0.768084] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
344[ 0.772020] pci 0000:05:00.0: PCI bridge to [bus 06-08]
345[ 0.776005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff]
346[ 0.776009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff]
347[ 0.776070] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000
348[ 0.776082] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff]
349[ 0.776091] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff]
350[ 0.776100] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f]
351[ 0.776132] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref]
352[ 0.776174] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
353[ 0.776235] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000
354[ 0.776247] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff]
355[ 0.776256] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff]
356[ 0.776266] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f]
357[ 0.776297] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref]
358[ 0.776339] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
359[ 0.776393] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
360[ 0.780009] pci 0000:06:00.0: PCI bridge to [bus 07]
361[ 0.784005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff]
362[ 0.784009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff]
363[ 0.784072] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000
364[ 0.784084] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff]
365[ 0.784093] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff]
366[ 0.784102] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f]
367[ 0.784134] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref]
368[ 0.784176] pci 0000:08:00.0: PME# supported from D0 D3hot
369[ 0.784237] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000
370[ 0.784249] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff]
371[ 0.784258] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff]
372[ 0.784267] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f]
373[ 0.784299] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref]
374[ 0.784341] pci 0000:08:00.1: PME# supported from D0 D3hot
375[ 0.784396] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
376[ 0.788009] pci 0000:06:01.0: PCI bridge to [bus 08]
377[ 0.792005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff]
378[ 0.792009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff]
379[ 0.792044] pci_bus 0000:00: on NUMA node 0
380[ 0.792102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
381[ 0.800051] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
382[ 0.805547] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
383[ 0.813217] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
384[ 0.820246] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
385[ 0.826710] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
386[ 0.830710] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
387[ 0.836988] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
388[ 0.841546] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
389[ 0.850434] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
390[ 0.857598] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
391[ 0.864243] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
392[ 0.869541] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
393[ 0.876909] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
394[ 0.884245] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
395[ 0.890708] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
396[ 0.894710] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
397[ 0.903179] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
398[ 0.909598] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
399[ 0.916051] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
400[ 0.921876] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
401[ 0.928401] ACPI: Enabled 1 GPEs in block 00 to 1F
402[ 0.932092] vgaarb: setting as boot device: PCI:0000:01:04.0
403[ 0.936000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
404[ 0.944008] vgaarb: loaded
405[ 0.948001] vgaarb: bridge control possible 0000:01:04.0
406[ 0.952119] PCI: Using ACPI for IRQ routing
407[ 0.960004] PCI: pci_cache_line_size set to 64 bytes
408[ 0.960065] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
409[ 0.960067] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
410[ 0.960259] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
411[ 0.964005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
412[ 0.972191] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
413[ 0.980042] Switched to clocksource hpet
414[ 0.992833] pnp: PnP ACPI init
415[ 0.995916] ACPI: bus type PNP registered
416[ 1.000326] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
417[ 1.000377] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
418[ 1.000432] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
419[ 1.000484] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
420[ 1.000512] pnp 00:04: [dma 2]
421[ 1.000537] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
422[ 1.000552] pnp: PnP ACPI: found 5 devices
423[ 1.004647] ACPI: bus type PNP unregistered
424[ 1.016052] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d480000-0x0d48ffff pref]: no compatible bridge window
425[ 1.026015] pci 0000:00:09.0: PCI bridge to [bus 01]
426[ 1.030975] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
427[ 1.037068] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
428[ 1.043853] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
429[ 1.051078] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref]
430[ 1.058293] pci 0000:00:0b.0: PCI bridge to [bus 02]
431[ 1.063258] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff]
432[ 1.070044] pci 0000:00:0c.0: PCI bridge to [bus 03]
433[ 1.075009] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff]
434[ 1.081797] pci 0000:00:0d.0: PCI bridge to [bus 04]
435[ 1.086764] pci 0000:06:00.0: PCI bridge to [bus 07]
436[ 1.091727] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff]
437[ 1.097822] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff]
438[ 1.104611] pci 0000:06:01.0: PCI bridge to [bus 08]
439[ 1.109571] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff]
440[ 1.115666] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff]
441[ 1.122456] pci 0000:05:00.0: PCI bridge to [bus 06-08]
442[ 1.127675] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff]
443[ 1.133763] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff]
444[ 1.140552] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
445[ 1.145771] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff]
446[ 1.151856] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff]
447[ 1.158645] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff]
448[ 1.158647] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
449[ 1.158649] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff]
450[ 1.158651] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
451[ 1.158653] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
452[ 1.158655] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
453[ 1.158657] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff]
454[ 1.158659] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
455[ 1.158661] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff]
456[ 1.158664] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff]
457[ 1.158666] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
458[ 1.158668] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff]
459[ 1.158670] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff]
460[ 1.158672] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff]
461[ 1.158674] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
462[ 1.158676] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff]
463[ 1.158679] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
464[ 1.158680] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
465[ 1.158755] NET: Registered protocol family 2
466[ 1.163438] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
467[ 1.170861] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
468[ 1.177779] TCP: Hash tables configured (established 32768 bind 32768)
469[ 1.184397] TCP: reno registered
470[ 1.187629] UDP hash table entries: 2048 (order: 4, 65536 bytes)
471[ 1.193682] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
472[ 1.200293] NET: Registered protocol family 1
473[ 1.204937] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
474[ 1.210907] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
475[ 1.216747] pci 0000:00:00.0: Found enabled HT MSI Mapping
476[ 1.222254] pci 0000:00:00.0: Found enabled HT MSI Mapping
477[ 1.227734] pci 0000:00:0b.0: Found disabled HT MSI Mapping
478[ 1.233310] pci 0000:00:00.0: Found enabled HT MSI Mapping
479[ 1.238818] pci 0000:00:00.0: Found enabled HT MSI Mapping
480[ 1.244306] pci 0000:00:0c.0: Found disabled HT MSI Mapping
481[ 1.249879] pci 0000:00:00.0: Found enabled HT MSI Mapping
482[ 1.255391] pci 0000:00:00.0: Found enabled HT MSI Mapping
483[ 1.260875] pci 0000:00:0d.0: Found disabled HT MSI Mapping
484[ 1.266451] pci 0000:00:00.0: Found enabled HT MSI Mapping
485[ 1.271965] pci 0000:00:00.0: Found enabled HT MSI Mapping
486[ 1.277446] pci 0000:00:0e.0: Found disabled HT MSI Mapping
487[ 1.283022] pci 0000:00:00.0: Found enabled HT MSI Mapping
488[ 1.288522] pci 0000:01:04.0: Video device with shadowed ROM
489[ 1.288547] PCI: CLS 64 bytes, default 64
490[ 1.288628] Unpacking initramfs...
491[ 1.456292] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
492[ 1.463926] PCI-DMA: Disabling AGP.
493[ 1.467571] PCI-DMA: aperture base @ b4000000 size 65536 KB
494[ 1.473139] PCI-DMA: using GART IOMMU.
495[ 1.476894] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
496[ 1.487121] platform rtc_cmos: registered platform RTC device (no PNP device found)
497[ 1.494930] microcode: AMD CPU family 0xf not supported
498[ 1.500544] futex hash table entries: 1024 (order: 4, 65536 bytes)
499[ 1.506788] audit: initializing netlink subsys (disabled)
500[ 1.512221] audit: type=2000 audit(1450130908.512:1): initialized
501[ 1.518747] HugeTLB registered 2 MB page size, pre-allocated 0 pages
502[ 1.525123] zbud: loaded
503[ 1.527858] VFS: Disk quotas dquot_6.5.2
504[ 1.531800] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
505[ 1.538308] msgmni has been set to 7926
506[ 1.542582] alg: No test for stdrng (krng)
507[ 1.546731] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
508[ 1.554196] io scheduler noop registered
509[ 1.558118] io scheduler deadline registered
510[ 1.562436] io scheduler cfq registered (default)
511[ 1.567441] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
512[ 1.573033] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
513[ 1.579730] GHES: HEST is not enabled!
514[ 1.583567] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
515[ 1.610099] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
516[ 1.637709] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
517[ 1.645441] Linux agpgart interface v0.103
518[ 1.649657] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
519[ 1.659974] serio: i8042 KBD port at 0x60,0x64 irq 1
520[ 1.664947] serio: i8042 AUX port at 0x60,0x64 irq 12
521[ 1.670221] mousedev: PS/2 mouse device common for all mice
522[ 1.675879] rtc_cmos rtc_cmos: RTC can wake from S4
523[ 1.680912] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
524[ 1.687292] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
525[ 1.695135] ledtrig-cpu: registered to indicate activity on CPUs
526[ 1.701237] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
527[ 1.707679] AMD IOMMUv2 functionality not available on this system
528[ 1.713964] TCP: cubic registered
529[ 1.717352] NET: Registered protocol family 10
530[ 1.722099] mip6: Mobile IPv6
531[ 1.725074] NET: Registered protocol family 17
532[ 1.729521] mpls_gso: MPLS GSO support
533[ 1.733683] registered taskstats version 1
534[ 1.738377] rtc_cmos rtc_cmos: setting system clock to 2015-12-14 22:08:30 UTC (1450130910)
535[ 1.746783] PM: Hibernation image not present or could not be loaded.
536[ 1.748105] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
537[ 1.755935] Write protecting the kernel read-only data: 8192k
538[ 1.764103] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
539[ 1.772397] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
540[ 1.788780] systemd-udevd[72]: starting version 215
541[ 1.794060] random: systemd-udevd urandom read with 3 bits of entropy available
542[ 1.811075] pps_core: LinuxPPS API ver. 1 registered
543[ 1.816062] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
544[ 1.825376] ACPI: bus type USB registered
545[ 1.829442] usbcore: registered new interface driver usbfs
546[ 1.829511] PTP clock support registered
547[ 1.838863] usbcore: registered new interface driver hub
548[ 1.844940] tg3.c:v3.137 (May 11, 2014)
549[ 1.845038] usbcore: registered new device driver usb
550[ 1.853852] tg3 0000:02:00.0: enabling device (0004 -> 0006)
551[ 1.859682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
552[ 1.859692] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
553[ 1.859694] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
554[ 1.859972] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19
555[ 1.860128] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
556[ 1.860156] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X
557[ 1.860422] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
558[ 1.899134] ehci-pci: EHCI PCI platform driver
559[ 1.899167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
560[ 1.909963] ehci-pci 0000:00:02.1: EHCI Host Controller
561[ 1.915200] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
562[ 1.922605] ehci-pci 0000:00:02.1: debug port 1
563[ 1.927232] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
564[ 1.927255] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000
565[ 1.944011] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
566[ 1.949824] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
567[ 1.954252] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3
568[ 1.954254] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
569[ 1.954256] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
570[ 1.954258] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
571[ 1.954332] tg3 0000:03:00.0: enabling device (0004 -> 0006)
572[ 1.954414] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
573[ 2.002476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
574[ 2.009694] usb usb1: Product: EHCI Host Controller
575[ 2.014571] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
576[ 2.020664] usb usb1: SerialNumber: 0000:00:02.1
577[ 2.025674] hub 1-0:1.0: USB hub found
578[ 2.029436] hub 1-0:1.0: 10 ports detected
579[ 2.032962] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9
580[ 2.032963] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
581[ 2.033037] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D72468-003
582[ 2.033211] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18
583[ 2.033305] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
584[ 2.033329] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X
585[ 2.070626] ohci-pci: OHCI PCI platform driver
586[ 2.075223] ohci-pci 0000:00:02.0: OHCI PCI host controller
587[ 2.080809] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
588[ 2.087854] tg3 0000:03:00.0 eth2: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9
589[ 2.087856] tg3 0000:03:00.0 eth2: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
590[ 2.087858] tg3 0000:03:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
591[ 2.087859] tg3 0000:03:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit]
592[ 2.122734] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000
593[ 2.186043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
594[ 2.192853] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
595[ 2.192987] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8
596[ 2.192989] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection
597[ 2.193061] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003
598[ 2.193221] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
599[ 2.193246] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X
600[ 2.230824] usb usb2: Product: OHCI PCI host controller
601[ 2.236047] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
602[ 2.242140] usb usb2: SerialNumber: 0000:00:02.0
603[ 2.246946] hub 2-0:1.0: USB hub found
604[ 2.250711] hub 2-0:1.0: 10 ports detected
605[ 2.368771] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb
606[ 2.376682] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection
607[ 2.383632] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003
608[ 2.390429] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
609[ 2.399746] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X
610[ 2.572706] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca
611[ 2.580618] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection
612[ 2.587567] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003
613[ 2.597734] FS-Cache: Loaded
614[ 2.603638] RPC: Registered named UNIX socket transport module.
615[ 2.610056] RPC: Registered udp transport module.
616[ 2.616128] RPC: Registered tcp transport module.
617[ 2.622209] RPC: Registered tcp NFSv4.1 backchannel transport module.
618[ 2.632853] FS-Cache: Netfs 'nfs' registered for caching
619[ 2.644655] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
620[ 2.692080] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
621[ 4.586975] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
622[ 4.590210] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
623[ 4.590210] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
624[ 5.135629] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
625[ 5.149126] systemd[1]: Detected architecture 'x86-64'.
626[ 5.369146] systemd[1]: Inserted module 'autofs4'
627[ 5.374666] systemd[1]: Set hostname to <cb-test-tgt>.
628[ 5.446302] random: nonblocking pool is initialized
629[ 5.591494] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
630[ 5.604231] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
631[ 5.619426] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
632[ 5.627138] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
633[ 5.634718] systemd[1]: Expecting device dev-ttyS0.device...
634[ 5.648105] systemd[1]: Starting Remote File Systems (Pre).
635[ 5.664117] systemd[1]: Reached target Remote File Systems (Pre).
636[ 5.670291] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
637[ 5.692124] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
638[ 5.701596] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
639[ 5.709710] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
640[ 5.717635] systemd[1]: Starting Paths.
641[ 5.732052] systemd[1]: Reached target Paths.
642[ 5.736436] systemd[1]: Starting Encrypted Volumes.
643[ 5.752046] systemd[1]: Reached target Encrypted Volumes.
644[ 5.757459] systemd[1]: Starting Swap.
645[ 5.772055] systemd[1]: Reached target Swap.
646[ 5.776348] systemd[1]: Starting Root Slice.
647[ 5.788060] systemd[1]: Created slice Root Slice.
648[ 5.792779] systemd[1]: Starting User and Session Slice.
649[ 5.808046] systemd[1]: Created slice User and Session Slice.
650[ 5.813800] systemd[1]: Starting Delayed Shutdown Socket.
651[ 5.828046] systemd[1]: Listening on Delayed Shutdown Socket.
652[ 5.833805] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
653[ 5.852046] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
654[ 5.859014] systemd[1]: Starting Journal Socket (/dev/log).
655[ 5.876045] systemd[1]: Listening on Journal Socket (/dev/log).
656[ 5.881977] systemd[1]: Starting udev Kernel Socket.
657[ 5.896055] systemd[1]: Listening on udev Kernel Socket.
658[ 5.901393] systemd[1]: Starting udev Control Socket.
659[ 5.916040] systemd[1]: Listening on udev Control Socket.
660[ 5.921460] systemd[1]: Starting Journal Socket.
661[ 5.936047] systemd[1]: Listening on Journal Socket.
662[ 5.941054] systemd[1]: Starting System Slice.
663[ 5.956045] systemd[1]: Created slice System Slice.
664[ 5.960934] systemd[1]: Starting system-getty.slice.
665[ 5.976054] systemd[1]: Created slice system-getty.slice.
666[ 5.981471] systemd[1]: Starting system-serial\x2dgetty.slice.
667[ 5.996056] systemd[1]: Created slice system-serial\x2dgetty.slice.
668[ 6.002355] systemd[1]: Starting Increase datagram queue length...
669[ 6.020653] systemd[1]: Mounting Huge Pages File System...
670[ 6.036685] systemd[1]: Starting udev Coldplug all Devices...
671[ 6.246821] systemd[1]: Starting Load Kernel Modules...
672[ 6.260985] systemd[1]: Mounting POSIX Message Queue File System...
673[ 6.304530] systemd[1]: Started Set Up Additional Binary Formats.
674[ 6.310796] systemd[1]: Mounting Debug File System...
675[ 6.324978] systemd[1]: Starting Create list of required static device nodes for the current kernel...
676[ 6.348532] systemd[1]: Starting Slices.
677[ 6.360054] systemd[1]: Reached target Slices.
678[ 6.364525] systemd[1]: Starting Remount Root and Kernel File Systems...
679[ 6.392098] systemd[1]: Mounted Debug File System.
680[ 6.408086] systemd[1]: Mounted POSIX Message Queue File System.
681[ 6.424060] systemd[1]: Mounted Huge Pages File System.
682[ 6.440048] systemd[1]: Started Increase datagram queue length.
683[ 6.456074] systemd[1]: Started Load Kernel Modules.
684[ 6.476117] systemd[1]: Started Create list of required static device nodes for the current kernel.
685[ 6.496069] systemd[1]: Started Remount Root and Kernel File Systems.
686[ 6.512067] systemd[1]: Started udev Coldplug all Devices.
687[ 6.543156] systemd[1]: Started Various fixups to make systemd work better on Debian.
688[ 6.551013] systemd[1]: Starting Load/Save Random Seed...
689[ 6.564885] systemd[1]: Starting Create Static Device Nodes in /dev...
690[ 6.580767] systemd[1]: Mounted Configuration File System.
691[ 6.586345] systemd[1]: Starting Apply Kernel Variables...
692[ 6.600798] systemd[1]: Mounted FUSE Control File System.
693[ 6.606276] systemd[1]: Starting Syslog Socket.
694[ 6.620146] systemd[1]: Listening on Syslog Socket.
695[ 6.625130] systemd[1]: Starting Sockets.
696[ 6.640106] systemd[1]: Reached target Sockets.
697[ 6.644694] systemd[1]: Starting Journal Service...
698[ 6.668084] systemd[1]: Started Journal Service.
699[ 6.804170] systemd-udevd[153]: starting version 215
700[ 7.066039] systemd-journald[151]: Received request to flush runtime journal from PID 1
701[ 7.519156] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
702[ 7.554881] SCSI subsystem initialized
703[ 7.563031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
704[ 7.571398] ACPI: Power Button [PWRB]
705[ 7.575119] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
706[ 7.582509] ACPI: Power Button [PWRF]
707[ 7.632144] systemd-udevd[177]: renamed network interface eth1 to eth6
708[ 7.655892] FDC 0 is a post-1991 82077
709[ 7.667805] libata version 3.00 loaded.
710[ 7.667873] i2c i2c-0: nForce2 SMBus adapter at 0x4c80
711[ 7.673082] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0
712[ 7.678438] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
713[ 7.686877] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
714[ 7.695248] pata_amd 0000:00:06.0: version 0.4.1
715[ 7.696021] scsi0 : pata_amd
716[ 7.699342] scsi1 : pata_amd
717[ 7.702656] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14
718[ 7.709618] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15
719[ 7.717720] EDAC MC: Ver: 3.0.0
720[ 7.718625] sata_nv 0000:00:07.0: version 3.5
721[ 7.718961] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
722[ 7.721713] scsi2 : sata_nv
723[ 7.721915] scsi3 : sata_nv
724[ 7.721964] ata3: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21
725[ 7.721966] ata4: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21
726[ 7.722187] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
727[ 7.722564] scsi4 : sata_nv
728[ 7.722761] scsi5 : sata_nv
729[ 7.722809] ata5: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20
730[ 7.722811] ata6: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20
731[ 7.772458] input: PC Speaker as /devices/platform/pcspkr/input/input4
732[ 7.808571] MCE: In-kernel MCE decoding enabled.
733[ 7.819139] kvm: Nested Virtualization enabled
734[ 7.843417] AMD64 EDAC driver v3.4.0
735[ 7.847049] EDAC amd64: DRAM ECC enabled.
736[ 7.851090] EDAC amd64: K8 revF or later detected (node 0).
737[ 7.856679] EDAC MC: DCT0 chip selects:
738[ 7.856680] EDAC amd64: MC: 0: 0MB 1: 0MB
739[ 7.856681] EDAC amd64: MC: 2: 0MB 3: 0MB
740[ 7.856682] EDAC amd64: MC: 4: 1024MB 5: 1024MB
741[ 7.856685] EDAC amd64: MC: 6: 1024MB 7: 1024MB
742[ 7.856715] EDAC amd64: CS4: Registered DDR2 RAM
743[ 7.856716] EDAC amd64: CS5: Registered DDR2 RAM
744[ 7.856716] EDAC amd64: CS6: Registered DDR2 RAM
745[ 7.856717] EDAC amd64: CS7: Registered DDR2 RAM
746[ 7.856765] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
747[ 7.856766] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
748[ 7.856767] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
749[ 7.856767] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
750[ 7.856768] powernow_k8: fid 0xe (2200 MHz), vid 0x12
751[ 7.856768] powernow_k8: fid 0xc (2000 MHz), vid 0x12
752[ 7.856769] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
753[ 7.856905] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
754[ 7.856907] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
755[ 7.856908] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
756[ 7.856908] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
757[ 7.856909] powernow_k8: fid 0xe (2200 MHz), vid 0x12
758[ 7.856909] powernow_k8: fid 0xc (2000 MHz), vid 0x12
759[ 7.856910] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
760[ 7.856966] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00)
761[ 7.856986] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
762[ 7.857001] EDAC amd64: DRAM ECC disabled.
763[ 7.857005] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
764 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
765 (Note that use of the override may cause unknown side effects.)
766[ 7.857040] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
767[ 8.036075] ata5: SATA link down (SStatus 0 SControl 300)
768[ 8.037453] ata3: SATA link down (SStatus 0 SControl 300)
769[ 8.356038] ata4: SATA link down (SStatus 0 SControl 300)
770[ 8.672032] ata6: SATA link down (SStatus 0 SControl 300)
771[ 8.938149] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
772[ 39.282775] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****