Gitiles
Code Review Sign In
review.coreboot.org / board-status / 2bc4cf352d833fde840581b0ce9e7b7a63504e18 / . / asus / kfsn4-dre / 4.6-682-g55ea013 / 2017-07-11T11_37_14Z / kernel_log.txt
blob: 555ba3d238326b0d4935e6e990f5a1685c04d12d [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand922835e2017-07-11 12:13:10 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 07/11/2017
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f7420-0x000f742f] mapped at [ffff8800000f7420]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F75F0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
63[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFAE900 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFAE940 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFAEA10 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFAEB60 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFAEB90 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFAEBD0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFAED20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048376
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xa5fa000000-0xa5fbffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour VGA+ 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.872 MHz processor
182[ 0.000151] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.74 BogoMIPS (lpj=7639488)
183[ 0.010787] pid_max: default: 32768 minimum: 301
184[ 0.015432] ACPI: Core revision 20140424
185[ 0.021748] ACPI: All ACPI Tables successfully acquired
186[ 0.027109] Security Framework initialized
187[ 0.031227] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037063] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044783] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.057800] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067549] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074450] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082270] Initializing cgroup subsys memory
194[ 0.086648] Initializing cgroup subsys devices
195[ 0.091113] Initializing cgroup subsys freezer
196[ 0.095563] Initializing cgroup subsys net_cls
197[ 0.100029] Initializing cgroup subsys blkio
198[ 0.104325] Initializing cgroup subsys perf_event
199[ 0.109043] Initializing cgroup subsys net_prio
200[ 0.113630] tseg: 0000000000
201[ 0.113642] CPU: Physical Processor ID: 0
202[ 0.117662] CPU: Processor Core ID: 0
203[ 0.121335] mce: CPU supports 6 MCE banks
204[ 0.125361] LVT offset 0 assigned for vector 0xf9
205[ 0.130083] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145421] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
209[ 0.154428] ftrace: allocating 21614 entries in 85 pages
210[ 0.169719] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215241] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332508] Performance Events: AMD PMU driver.
213[ 0.337072] ... version: 0
214[ 0.341084] ... bit width: 48
215[ 0.345182] ... generic registers: 4
216[ 0.349194] ... value mask: 0000ffffffffffff
217[ 0.354505] ... max period: 00007fffffffffff
218[ 0.359823] ... fixed-purpose events: 0
219[ 0.363834] ... event mask: 000000000000000f
220[ 0.371674] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.379878] x86: Booting SMP configuration:
222[ 0.384067] .... node #0, CPUs: #1 #2 #3
223[ 0.428404] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581181] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585480] smpboot: Total of 8 processors activated (30558.17 BogoMIPS)
226[ 0.597969] devtmpfs: initialized
227[ 0.609296] pinctrl core: initialized pinctrl subsystem
228[ 0.614701] NET: Registered protocol family 16
229[ 0.619374] cpuidle: using governor ladder
230[ 0.623481] cpuidle: using governor menu
231[ 0.627419] node 0 link 1: io port [1000, 3fff]
232[ 0.627422] TOM: 00000000c0000000 aka 3072M
233[ 0.631615] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.631619] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.631622] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.631624] TOM2: 0000000180000000 aka 6144M
237[ 0.635902] bus: [bus 00-05] on node 0 link 1
238[ 0.635904] bus: 00 [io 0x0000-0xffff]
239[ 0.635906] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.635908] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.636013] ACPI: bus type PCI registered
242[ 0.640028] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.646638] PCI: Using configuration type 1 for base access
244[ 0.652215] PCI: Using configuration type 1 for extended access
245[ 0.669330] ACPI: Added _OSI(Module Device)
246[ 0.673524] ACPI: Added _OSI(Processor Device)
247[ 0.677974] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682686] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.689166] ACPI: Executed 1 blocks of module-level executable AML code
250[ 0.698350] ACPI: Interpreter enabled
251[ 0.702037] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
252[ 0.711290] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
253[ 0.720565] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
254[ 0.729837] ACPI: (supports S0 S1 S5)
255[ 0.733506] ACPI: Using IOAPIC for interrupt routing
256[ 0.738516] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
257[ 0.767336] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
258[ 0.773522] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
259[ 0.781734] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
260[ 0.821636] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
261[ 0.831643] PCI host bridge to bus 0000:00
262[ 0.835750] pci_bus 0000:00: root bus resource [bus 00-05]
263[ 0.841239] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
264[ 0.847418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
265[ 0.854296] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
266[ 0.861175] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
267[ 0.868054] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
268[ 0.874252] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
269[ 0.874445] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
270[ 0.874453] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
271[ 0.874583] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
272[ 0.874591] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
273[ 0.874618] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
274[ 0.874637] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
275[ 0.874689] pci 0000:00:01.1: PME# supported from D3hot D3cold
276[ 0.874786] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
277[ 0.874794] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
278[ 0.874847] pci 0000:00:02.0: supports D1 D2
279[ 0.874857] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
280[ 0.874902] pci 0000:00:02.0: System wakeup disabled by ACPI
281[ 0.880633] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
282[ 0.880651] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
283[ 0.880692] pci 0000:00:02.1: supports D1 D2
284[ 0.880694] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
285[ 0.880737] pci 0000:00:02.1: System wakeup disabled by ACPI
286[ 0.886468] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
287[ 0.886497] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
288[ 0.886509] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
289[ 0.893646] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
290[ 0.900178] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
291[ 0.907308] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
292[ 0.913940] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
293[ 0.913948] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
294[ 0.913953] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
295[ 0.913957] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
296[ 0.913962] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
297[ 0.913967] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
298[ 0.913972] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
299[ 0.914104] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
300[ 0.914111] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
301[ 0.914116] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
302[ 0.914121] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
303[ 0.914125] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
304[ 0.914130] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
305[ 0.914135] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
306[ 0.914245] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
307[ 0.914312] pci 0000:00:09.0: System wakeup disabled by ACPI
308[ 0.920036] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
309[ 0.920086] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
310[ 0.920137] pci 0000:00:0b.0: System wakeup disabled by ACPI
311[ 0.925855] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
312[ 0.925928] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
313[ 0.925974] pci 0000:00:0c.0: System wakeup disabled by ACPI
314[ 0.931702] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
315[ 0.931772] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.931832] pci 0000:00:0d.0: System wakeup disabled by ACPI
317[ 0.937553] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
318[ 0.937603] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.937680] pci 0000:00:0e.0: System wakeup disabled by ACPI
320[ 0.943425] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
321[ 0.943570] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
322[ 0.943740] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
323[ 0.943838] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
324[ 0.943968] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
325[ 0.944080] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
326[ 0.944288] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
327[ 0.944394] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
328[ 0.944520] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
329[ 0.944689] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
330[ 0.944896] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
331[ 0.944926] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
332[ 0.944933] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
333[ 0.944945] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
334[ 0.944990] pci 0000:01:04.0: supports D1 D2
335[ 0.945097] pci 0000:00:09.0: PCI bridge to [bus 01]
336[ 0.950066] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
337[ 0.950069] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
338[ 0.950073] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
339[ 0.950151] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
340[ 0.950209] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
341[ 0.950234] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
342[ 0.950342] pci 0000:02:00.0: PME# supported from D3hot D3cold
343[ 0.950445] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
344[ 0.960451] pci 0000:00:0b.0: PCI bridge to [bus 02]
345[ 0.965419] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
346[ 0.965507] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
347[ 0.965542] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
348[ 0.965662] pci 0000:03:00.0: PME# supported from D3hot D3cold
349[ 0.965747] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.975749] pci 0000:00:0c.0: PCI bridge to [bus 03]
351[ 0.980717] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
352[ 0.980790] pci 0000:00:0d.0: PCI bridge to [bus 04]
353[ 0.985831] pci 0000:00:0e.0: PCI bridge to [bus 05]
354[ 0.990817] pci_bus 0000:00: on NUMA node 0
355[ 0.990916] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
356[ 0.997065] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
357[ 1.003262] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
358[ 1.010571] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
359[ 1.017883] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
360[ 1.025168] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
361[ 1.032456] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
362[ 1.038576] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
363[ 1.044713] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.052003] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
365[ 1.059307] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
366[ 1.066607] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
367[ 1.072731] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
368[ 1.078857] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
369[ 1.086152] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
370[ 1.093449] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
371[ 1.100744] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
372[ 1.109270] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
373[ 1.115723] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
374[ 1.122193] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
375[ 1.128652] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
376[ 1.135431] ACPI: Enabled 1 GPEs in block 00 to 1F
377[ 1.140548] vgaarb: setting as boot device: PCI:0000:01:04.0
378[ 1.146218] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
379[ 1.154313] vgaarb: loaded
380[ 1.157022] vgaarb: bridge control possible 0000:01:04.0
381[ 1.162504] PCI: Using ACPI for IRQ routing
382[ 1.166694] PCI: pci_cache_line_size set to 64 bytes
383[ 1.166751] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
384[ 1.166755] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
385[ 1.167062] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
386[ 1.174120] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
387[ 1.179181] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
388[ 1.187850] Switched to clocksource hpet
389[ 1.203445] pnp: PnP ACPI init
390[ 1.206557] ACPI: bus type PNP registered
391[ 1.211084] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
392[ 1.211170] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
393[ 1.211252] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.211350] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
395[ 1.211386] pnp 00:04: [dma 2]
396[ 1.211434] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
397[ 1.211465] pnp: PnP ACPI: found 5 devices
398[ 1.215577] ACPI: bus type PNP unregistered
399[ 1.227603] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
400[ 1.237552] pci 0000:00:09.0: PCI bridge to [bus 01]
401[ 1.242526] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
402[ 1.248636] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
403[ 1.255429] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
404[ 1.262662] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
405[ 1.269888] pci 0000:00:0b.0: PCI bridge to [bus 02]
406[ 1.274862] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
407[ 1.281656] pci 0000:00:0c.0: PCI bridge to [bus 03]
408[ 1.286627] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
409[ 1.293422] pci 0000:00:0d.0: PCI bridge to [bus 04]
410[ 1.298395] pci 0000:00:0e.0: PCI bridge to [bus 05]
411[ 1.303375] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
412[ 1.303377] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
413[ 1.303380] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
414[ 1.303382] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
415[ 1.303385] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
416[ 1.303388] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
417[ 1.303391] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
418[ 1.303393] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
419[ 1.303396] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
420[ 1.303399] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
421[ 1.303536] NET: Registered protocol family 2
422[ 1.308423] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
423[ 1.316116] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
424[ 1.323455] TCP: Hash tables configured (established 65536 bind 65536)
425[ 1.330062] TCP: reno registered
426[ 1.333321] UDP hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.339533] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
428[ 1.346325] NET: Registered protocol family 1
429[ 1.351072] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
430[ 1.357152] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
431[ 1.363072] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.368600] pci 0000:00:00.0: Found enabled HT MSI Mapping
433[ 1.374116] pci 0000:00:0b.0: Found disabled HT MSI Mapping
434[ 1.379702] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.385252] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.390768] pci 0000:00:0c.0: Found disabled HT MSI Mapping
437[ 1.396344] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.401894] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.407409] pci 0000:00:0d.0: Found disabled HT MSI Mapping
440[ 1.412989] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.418523] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.424036] pci 0000:00:0e.0: Found disabled HT MSI Mapping
443[ 1.429623] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.435143] pci 0000:01:04.0: Video device with shadowed ROM
445[ 1.435152] PCI: CLS 64 bytes, default 64
446[ 1.435262] Unpacking initramfs...
447[ 1.818302] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
448[ 1.826262] PCI-DMA: Disabling AGP.
449[ 1.829931] PCI-DMA: aperture base @ b4000000 size 65536 KB
450[ 1.835516] PCI-DMA: using GART IOMMU.
451[ 1.839276] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
452[ 1.851186] platform rtc_cmos: registered platform RTC device (no PNP device found)
453[ 1.859343] microcode: CPU0: patch_level=0x01000084
454[ 1.864236] microcode: CPU1: patch_level=0x01000084
455[ 1.869130] microcode: CPU2: patch_level=0x01000084
456[ 1.874033] microcode: CPU3: patch_level=0x01000084
457[ 1.878938] microcode: CPU4: patch_level=0x01000084
458[ 1.883835] microcode: CPU5: patch_level=0x01000084
459[ 1.888736] microcode: CPU6: patch_level=0x01000084
460[ 1.893627] microcode: CPU7: patch_level=0x01000084
461[ 1.898616] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
462[ 1.907420] LVT offset 1 assigned for vector 0x400
463[ 1.912230] IBS: LVT offset 1 assigned
464[ 1.916020] perf: AMD IBS detected (0x00000007)
465[ 1.921179] futex hash table entries: 2048 (order: 5, 131072 bytes)
466[ 1.927566] audit: initializing netlink subsys (disabled)
467[ 1.932991] audit: type=2000 audit(1499775036.668:1): initialized
468[ 1.939873] HugeTLB registered 2 MB page size, pre-allocated 0 pages
469[ 1.946278] zbud: loaded
470[ 1.949189] VFS: Disk quotas dquot_6.5.2
471[ 1.953155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
472[ 1.959697] msgmni has been set to 9945
473[ 1.964062] alg: No test for stdrng (krng)
474[ 1.968222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
475[ 1.975715] io scheduler noop registered
476[ 1.979651] io scheduler deadline registered
477[ 1.984001] io scheduler cfq registered (default)
478[ 1.988922] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
479[ 1.989047] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
480[ 1.989158] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
481[ 1.989265] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
482[ 1.989420] aer 0000:00:0b.0:pcie02: service driver aer loaded
483[ 1.989444] aer 0000:00:0c.0:pcie02: service driver aer loaded
484[ 1.989471] aer 0000:00:0d.0:pcie02: service driver aer loaded
485[ 1.989492] aer 0000:00:0e.0:pcie02: service driver aer loaded
486[ 1.989514] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
487[ 1.996489] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
488[ 2.003024] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
489[ 2.003034] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
490[ 2.009998] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
491[ 2.016531] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
492[ 2.016540] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
493[ 2.023504] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
494[ 2.023515] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
495[ 2.030481] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
496[ 2.030511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
497[ 2.036122] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
498[ 2.042834] GHES: HEST is not enabled!
499[ 2.046723] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
500[ 2.073326] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
501[ 2.101007] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
502[ 2.108922] Linux agpgart interface v0.103
503[ 2.113232] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
504[ 2.123761] serio: i8042 KBD port at 0x60,0x64 irq 1
505[ 2.128737] serio: i8042 AUX port at 0x60,0x64 irq 12
506[ 2.133977] mousedev: PS/2 mouse device common for all mice
507[ 2.139654] rtc_cmos rtc_cmos: RTC can wake from S4
508[ 2.144785] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
509[ 2.151186] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
510[ 2.159043] ledtrig-cpu: registered to indicate activity on CPUs
511[ 2.165234] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
512[ 2.171681] AMD IOMMUv2 functionality not available on this system
513[ 2.178014] TCP: cubic registered
514[ 2.181483] NET: Registered protocol family 10
515[ 2.186376] mip6: Mobile IPv6
516[ 2.189360] NET: Registered protocol family 17
517[ 2.193888] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
518[ 2.202536] mpls_gso: MPLS GSO support
519[ 2.207162] registered taskstats version 1
520[ 2.212058] rtc_cmos rtc_cmos: setting system clock to 2017-07-11 12:10:38 UTC (1499775038)
521[ 2.220485] PM: Hibernation image not present or could not be loaded.
522[ 2.222294] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
523[ 2.230146] Write protecting the kernel read-only data: 8192k
524[ 2.239334] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
525[ 2.247954] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
526[ 2.280888] systemd-udevd[99]: starting version 215
527[ 2.286590] random: systemd-udevd urandom read with 4 bits of entropy available
528[ 2.315793] SCSI subsystem initialized
529[ 2.320426] ACPI: bus type USB registered
530[ 2.324578] usbcore: registered new interface driver usbfs
531[ 2.330154] usbcore: registered new interface driver hub
532[ 2.331690] FDC 0 is a post-1991 82077
533[ 2.339963] pps_core: LinuxPPS API ver. 1 registered
534[ 2.339976] usbcore: registered new device driver usb
535[ 2.350084] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.359815] libata version 3.00 loaded.
537[ 2.360253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
538[ 2.367148] pata_amd 0000:00:06.0: version 0.4.1
539[ 2.368013] PTP clock support registered
540[ 2.368272] scsi0 : pata_amd
541[ 2.375319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
542[ 2.375330] ehci-pci: EHCI PCI platform driver
543[ 2.375381] scsi1 : pata_amd
544[ 2.375495] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
545[ 2.375496] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
546[ 2.375592] sata_nv 0000:00:07.0: version 3.5
547[ 2.375873] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
548[ 2.376509] scsi2 : sata_nv
549[ 2.376725] scsi3 : sata_nv
550[ 2.376802] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
551[ 2.376805] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
552[ 2.377105] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
553[ 2.377600] scsi4 : sata_nv
554[ 2.377771] scsi5 : sata_nv
555[ 2.377831] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
556[ 2.377833] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
557[ 2.454391] tg3.c:v3.137 (May 11, 2014)
558[ 2.454427] ehci-pci 0000:00:02.1: EHCI Host Controller
559[ 2.454457] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
560[ 2.454480] ehci-pci 0000:00:02.1: debug port 1
561[ 2.454529] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
562[ 2.454558] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
563[ 2.463442] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
564[ 2.463544] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
565[ 2.463547] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
566[ 2.463548] usb usb1: Product: EHCI Host Controller
567[ 2.463550] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
568[ 2.463551] usb usb1: SerialNumber: 0000:00:02.1
569[ 2.463790] hub 1-0:1.0: USB hub found
570[ 2.463799] hub 1-0:1.0: 10 ports detected
571[ 2.524320] tg3 0000:02:00.0: enabling device (0004 -> 0006)
572[ 2.530332] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
573[ 2.542583] ohci-pci: OHCI PCI platform driver
574[ 2.547257] ohci-pci 0000:00:02.0: OHCI PCI host controller
575[ 2.552862] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
576[ 2.560312] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
577[ 2.598551] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
578[ 2.608809] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
579[ 2.618543] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
580[ 2.626376] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
581[ 2.635189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
582[ 2.641980] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
583[ 2.649202] usb usb2: Product: OHCI PCI host controller
584[ 2.654437] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
585[ 2.660533] usb usb2: SerialNumber: 0000:00:02.0
586[ 2.665178] tg3 0000:03:00.0: enabling device (0004 -> 0006)
587[ 2.670992] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
588[ 2.676977] hub 2-0:1.0: USB hub found
589[ 2.680749] hub 2-0:1.0: 10 ports detected
590[ 2.687371] ata3: SATA link down (SStatus 0 SControl 300)
591[ 2.687377] ata5: SATA link down (SStatus 0 SControl 300)
592[ 2.727824] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
593[ 2.738086] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
594[ 2.747821] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
595[ 2.755653] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
596[ 2.847296] tsc: Refined TSC clocksource calibration: 1909.787 MHz
597[ 3.031234] ata4: SATA link down (SStatus 0 SControl 300)
598[ 3.347114] ata6: SATA link down (SStatus 0 SControl 300)
599[ 3.371275] FS-Cache: Loaded
600[ 3.379305] RPC: Registered named UNIX socket transport module.
601[ 3.386439] RPC: Registered udp transport module.
602[ 3.392520] RPC: Registered tcp transport module.
603[ 3.398611] RPC: Registered tcp NFSv4.1 backchannel transport module.
604[ 3.412123] FS-Cache: Netfs 'nfs' registered for caching
605[ 3.428409] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
606[ 3.475187] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
607[ 3.851040] Switched to clocksource tsc
608[ 6.139801] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
609[ 6.146418] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
610[ 6.153303] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
611[ 11.857153] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
612[ 11.870848] systemd[1]: Detected architecture 'x86-64'.
613[ 11.916808] systemd[1]: Inserted module 'autofs4'
614[ 11.923663] systemd[1]: Set hostname to <cb-test-tgt>.
615[ 12.081807] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
616[ 12.094649] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
617[ 12.110048] systemd[1]: Expecting device dev-ttyS0.device...
618[ 12.124213] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
619[ 12.131987] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
620[ 12.139592] systemd[1]: Starting Remote File Systems (Pre).
621[ 12.156127] systemd[1]: Reached target Remote File Systems (Pre).
622[ 12.162262] systemd[1]: Starting Encrypted Volumes.
623[ 12.176121] systemd[1]: Reached target Encrypted Volumes.
624[ 12.181582] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
625[ 12.204121] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
626[ 12.213554] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
627[ 12.221617] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
628[ 12.229547] systemd[1]: Starting Paths.
629[ 12.244101] systemd[1]: Reached target Paths.
630[ 12.248499] systemd[1]: Starting Swap.
631[ 12.260076] systemd[1]: Reached target Swap.
632[ 12.264367] systemd[1]: Starting Root Slice.
633[ 12.276071] systemd[1]: Created slice Root Slice.
634[ 12.280800] systemd[1]: Starting User and Session Slice.
635[ 12.296068] systemd[1]: Created slice User and Session Slice.
636[ 12.301839] systemd[1]: Starting Delayed Shutdown Socket.
637[ 12.316047] systemd[1]: Listening on Delayed Shutdown Socket.
638[ 12.321819] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
639[ 12.340048] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
640[ 12.347028] systemd[1]: Starting Journal Socket (/dev/log).
641[ 12.364048] systemd[1]: Listening on Journal Socket (/dev/log).
642[ 12.370008] systemd[1]: Starting udev Kernel Socket.
643[ 12.384039] systemd[1]: Listening on udev Kernel Socket.
644[ 12.389395] systemd[1]: Starting udev Control Socket.
645[ 12.404042] systemd[1]: Listening on udev Control Socket.
646[ 12.409475] systemd[1]: Starting Journal Socket.
647[ 12.424019] systemd[1]: Listening on Journal Socket.
648[ 12.429034] systemd[1]: Starting System Slice.
649[ 12.444014] systemd[1]: Created slice System Slice.
650[ 12.448932] systemd[1]: Starting system-getty.slice.
651[ 12.464017] systemd[1]: Created slice system-getty.slice.
652[ 12.469451] systemd[1]: Starting system-serial\x2dgetty.slice.
653[ 12.484082] systemd[1]: Created slice system-serial\x2dgetty.slice.
654[ 12.490459] systemd[1]: Starting Increase datagram queue length...
655[ 12.509372] systemd[1]: Starting udev Coldplug all Devices...
656[ 12.543275] systemd[1]: Starting Load Kernel Modules...
657[ 12.559624] systemd[1]: Started Set Up Additional Binary Formats.
658[ 12.565896] systemd[1]: Mounting Debug File System...
659[ 12.581708] systemd[1]: Starting Create list of required static device nodes for the current kernel...
660[ 12.605211] systemd[1]: Mounting POSIX Message Queue File System...
661[ 12.621056] systemd[1]: Mounting Huge Pages File System...
662[ 12.637177] systemd[1]: Starting Slices.
663[ 12.652028] systemd[1]: Reached target Slices.
664[ 12.656575] systemd[1]: Starting Remount Root and Kernel File Systems...
665[ 12.688012] systemd[1]: Mounted Huge Pages File System.
666[ 12.703989] systemd[1]: Mounted POSIX Message Queue File System.
667[ 12.719932] systemd[1]: Mounted Debug File System.
668[ 12.735959] systemd[1]: Started Increase datagram queue length.
669[ 12.751946] systemd[1]: Started Load Kernel Modules.
670[ 12.771915] systemd[1]: Started Create list of required static device nodes for the current kernel.
671[ 12.795959] systemd[1]: Started Remount Root and Kernel File Systems.
672[ 12.811907] systemd[1]: Started udev Coldplug all Devices.
673[ 12.858264] systemd[1]: Started Various fixups to make systemd work better on Debian.
674[ 12.866142] systemd[1]: Starting Load/Save Random Seed...
675[ 12.881750] systemd[1]: Starting Create Static Device Nodes in /dev...
676[ 12.905367] systemd[1]: Starting Apply Kernel Variables...
677[ 12.921606] systemd[1]: Mounted Configuration File System.
678[ 12.927170] systemd[1]: Mounted FUSE Control File System.
679[ 12.932594] systemd[1]: Starting Syslog Socket.
680[ 12.947937] systemd[1]: Listening on Syslog Socket.
681[ 12.952900] systemd[1]: Starting Sockets.
682[ 12.967841] systemd[1]: Reached target Sockets.
683[ 12.972403] systemd[1]: Starting Journal Service...
684[ 12.999912] systemd[1]: Started Journal Service.
685[ 13.075041] systemd-udevd[215]: starting version 215
686[ 13.187787] systemd-journald[214]: Received request to flush runtime journal from PID 1
687[ 13.214229] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
688[ 13.222155] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
689[ 13.233720] EDAC MC: Ver: 3.0.0
690[ 13.238681] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
691[ 13.247159] input: PC Speaker as /devices/platform/pcspkr/input/input2
692[ 13.247822] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
693[ 13.247828] ACPI: Power Button [PWRB]
694[ 13.247910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
695[ 13.247912] ACPI: Power Button [PWRF]
696[ 13.276931] MCE: In-kernel MCE decoding enabled.
697[ 13.288462] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
698[ 13.293806] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
699[ 13.299156] AMD64 EDAC driver v3.4.0
700[ 13.302931] EDAC amd64: DRAM ECC enabled.
701[ 13.307003] EDAC amd64: F10h detected (node 0).
702[ 13.311684] EDAC MC: DCT0 chip selects:
703[ 13.311686] EDAC amd64: MC: 0: 0MB 1: 0MB
704[ 13.312023] acpi-cpufreq: overriding BIOS provided _PSD data
705[ 13.322076] EDAC amd64: MC: 2: 0MB 3: 0MB
706[ 13.326727] EDAC amd64: MC: 4: 0MB 5: 0MB
707[ 13.331462] EDAC amd64: MC: 6: 2048MB 7: 2048MB
708[ 13.336208] EDAC MC: DCT1 chip selects:
709[ 13.336210] EDAC amd64: MC: 0: 0MB 1: 0MB
710[ 13.340957] EDAC amd64: MC: 2: 0MB 3: 0MB
711[ 13.347077] EDAC amd64: MC: 4: 0MB 5: 0MB
712[ 13.353176] EDAC amd64: MC: 6: 1024MB 7: 1024MB
713[ 13.359259] EDAC amd64: using x4 syndromes.
714[ 13.364650] EDAC amd64: CS6: Registered DDR2 RAM
715[ 13.369381] EDAC amd64: CS7: Registered DDR2 RAM
716[ 13.370001] kvm: Nested Virtualization enabled
717[ 13.370011] kvm: Nested Paging enabled
718[ 13.382671] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
719[ 13.387426] random: nonblocking pool is initialized
720[ 13.397394] EDAC amd64: DRAM ECC enabled.
721[ 13.401468] EDAC amd64: F10h detected (node 1).
722[ 13.406049] EDAC MC: DCT0 chip selects:
723[ 13.406052] EDAC amd64: MC: 0: 1024MB 1: 0MB
724[ 13.410765] EDAC amd64: MC: 2: 0MB 3: 0MB
725[ 13.415487] EDAC amd64: MC: 4: 0MB 5: 0MB
726[ 13.420291] EDAC amd64: MC: 6: 0MB 7: 0MB
727[ 13.425003] EDAC MC: DCT1 chip selects:
728[ 13.425005] EDAC amd64: MC: 0: 0MB 1: 0MB
729[ 13.431014] EDAC amd64: MC: 2: 0MB 3: 0MB
730[ 13.435731] EDAC amd64: MC: 4: 0MB 5: 0MB
731[ 13.440617] EDAC amd64: MC: 6: 0MB 7: 0MB
732[ 13.446724] EDAC amd64: using x4 syndromes.
733[ 13.452295] EDAC amd64: MCT channel count: 1
734[ 13.458041] EDAC amd64: CS0: Registered DDR2 RAM
735[ 13.462928] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
736[ 13.472771] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
737[ 43.703648] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****