Gitiles
Code Review Sign In
review.coreboot.org / board-status / 2bc4cf352d833fde840581b0ce9e7b7a63504e18 / . / asus / kfsn4-dre / 4.5-1106-g0da186c / 2017-03-04T16_35_13Z / kernel_log.txt
blob: b3a0d97c86c1e27ce21799657a77a9b5be965e93 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 03/04/2017
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f0620-0x000f062f] mapped at [ffff8800000f0620]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F07F0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
63[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFAE900 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFAE940 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFAEA10 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFAEB60 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFAEB90 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFAEBD0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFAED20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048376
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour *CGA 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.859 MHz processor
182[ 0.000151] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.71 BogoMIPS (lpj=7639436)
183[ 0.010786] pid_max: default: 32768 minimum: 301
184[ 0.015433] ACPI: Core revision 20140424
185[ 0.021764] ACPI: All ACPI Tables successfully acquired
186[ 0.027126] Security Framework initialized
187[ 0.031245] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037081] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044794] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.057881] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067611] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074511] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082341] Initializing cgroup subsys memory
194[ 0.086718] Initializing cgroup subsys devices
195[ 0.091184] Initializing cgroup subsys freezer
196[ 0.095641] Initializing cgroup subsys net_cls
197[ 0.100099] Initializing cgroup subsys blkio
198[ 0.104385] Initializing cgroup subsys perf_event
199[ 0.109098] Initializing cgroup subsys net_prio
200[ 0.113681] tseg: 0000000000
201[ 0.113692] CPU: Physical Processor ID: 0
202[ 0.117714] CPU: Processor Core ID: 0
203[ 0.121395] mce: CPU supports 6 MCE banks
204[ 0.125431] LVT offset 0 assigned for vector 0xf9
205[ 0.130161] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145500] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
209[ 0.154507] ftrace: allocating 21614 entries in 85 pages
210[ 0.169795] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215321] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332519] Performance Events: AMD PMU driver.
213[ 0.337089] ... version: 0
214[ 0.341102] ... bit width: 48
215[ 0.345200] ... generic registers: 4
216[ 0.349210] ... value mask: 0000ffffffffffff
217[ 0.354522] ... max period: 00007fffffffffff
218[ 0.359842] ... fixed-purpose events: 0
219[ 0.363852] ... event mask: 000000000000000f
220[ 0.371697] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.379903] x86: Booting SMP configuration:
222[ 0.384092] .... node #0, CPUs: #1 #2 #3
223[ 0.428421] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581207] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585506] smpboot: Total of 8 processors activated (30558.14 BogoMIPS)
226[ 0.597986] devtmpfs: initialized
227[ 0.609299] pinctrl core: initialized pinctrl subsystem
228[ 0.614697] NET: Registered protocol family 16
229[ 0.619367] cpuidle: using governor ladder
230[ 0.623472] cpuidle: using governor menu
231[ 0.627409] node 0 link 1: io port [1000, 3fff]
232[ 0.627413] TOM: 00000000c0000000 aka 3072M
233[ 0.631605] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.631609] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.631612] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.631615] TOM2: 0000000180000000 aka 6144M
237[ 0.635894] bus: [bus 00-05] on node 0 link 1
238[ 0.635896] bus: 00 [io 0x0000-0xffff]
239[ 0.635898] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.635899] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.636004] ACPI: bus type PCI registered
242[ 0.640019] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.646625] PCI: Using configuration type 1 for base access
244[ 0.652199] PCI: Using configuration type 1 for extended access
245[ 0.669347] ACPI: Added _OSI(Module Device)
246[ 0.673542] ACPI: Added _OSI(Processor Device)
247[ 0.677990] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682702] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.689189] ACPI: Executed 1 blocks of module-level executable AML code
250[ 0.698350] ACPI: Interpreter enabled
251[ 0.702036] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
252[ 0.711290] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
253[ 0.720565] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
254[ 0.729828] ACPI: (supports S0 S1 S5)
255[ 0.733499] ACPI: Using IOAPIC for interrupt routing
256[ 0.738516] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
257[ 0.767281] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
258[ 0.773470] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
259[ 0.781683] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
260[ 0.821948] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
261[ 0.831953] PCI host bridge to bus 0000:00
262[ 0.836061] pci_bus 0000:00: root bus resource [bus 00-05]
263[ 0.841551] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
264[ 0.847729] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
265[ 0.854598] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
266[ 0.861469] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
267[ 0.868340] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
268[ 0.874539] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
269[ 0.874740] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
270[ 0.874747] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
271[ 0.874874] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
272[ 0.874882] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
273[ 0.874904] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
274[ 0.874923] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
275[ 0.874974] pci 0000:00:01.1: PME# supported from D3hot D3cold
276[ 0.875072] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
277[ 0.875084] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
278[ 0.875134] pci 0000:00:02.0: supports D1 D2
279[ 0.875140] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
280[ 0.875184] pci 0000:00:02.0: System wakeup disabled by ACPI
281[ 0.880911] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
282[ 0.880923] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
283[ 0.880973] pci 0000:00:02.1: supports D1 D2
284[ 0.880983] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
285[ 0.881026] pci 0000:00:02.1: System wakeup disabled by ACPI
286[ 0.886752] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
287[ 0.886780] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
288[ 0.886795] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
289[ 0.893933] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
290[ 0.900464] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
291[ 0.907593] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
292[ 0.914221] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
293[ 0.914229] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
294[ 0.914234] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
295[ 0.914238] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
296[ 0.914243] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
297[ 0.914248] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
298[ 0.914252] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
299[ 0.914391] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
300[ 0.914403] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
301[ 0.914408] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
302[ 0.914412] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
303[ 0.914417] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
304[ 0.914422] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
305[ 0.914426] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
306[ 0.914534] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
307[ 0.914609] pci 0000:00:09.0: System wakeup disabled by ACPI
308[ 0.920336] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
309[ 0.920386] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
310[ 0.920437] pci 0000:00:0b.0: System wakeup disabled by ACPI
311[ 0.926159] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
312[ 0.926229] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
313[ 0.926287] pci 0000:00:0c.0: System wakeup disabled by ACPI
314[ 0.932010] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
315[ 0.932073] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.932185] pci 0000:00:0d.0: System wakeup disabled by ACPI
317[ 0.937911] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
318[ 0.937962] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.938020] pci 0000:00:0e.0: System wakeup disabled by ACPI
320[ 0.943758] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
321[ 0.943888] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
322[ 0.944067] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
323[ 0.944216] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
324[ 0.944369] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
325[ 0.944468] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
326[ 0.944672] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
327[ 0.944777] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
328[ 0.944886] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
329[ 0.945048] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
330[ 0.945238] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
331[ 0.945267] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
332[ 0.945274] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
333[ 0.945287] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
334[ 0.945331] pci 0000:01:04.0: supports D1 D2
335[ 0.945438] pci 0000:00:09.0: PCI bridge to [bus 01]
336[ 0.950421] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
337[ 0.950424] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
338[ 0.950428] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
339[ 0.950541] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
340[ 0.950599] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
341[ 0.950625] pci 0000:02:00.0: reg 0x30: [mem 0x7b730000-0x7b73ffff pref]
342[ 0.950730] pci 0000:02:00.0: PME# supported from D3hot D3cold
343[ 0.950835] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
344[ 0.960833] pci 0000:00:0b.0: PCI bridge to [bus 02]
345[ 0.965808] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
346[ 0.965895] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
347[ 0.965931] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
348[ 0.966023] pci 0000:03:00.0: PME# supported from D3hot D3cold
349[ 0.966138] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.976139] pci 0000:00:0c.0: PCI bridge to [bus 03]
351[ 0.981105] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
352[ 0.981178] pci 0000:00:0d.0: PCI bridge to [bus 04]
353[ 0.986220] pci 0000:00:0e.0: PCI bridge to [bus 05]
354[ 0.991207] pci_bus 0000:00: on NUMA node 0
355[ 0.991308] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
356[ 0.997499] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
357[ 1.003651] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
358[ 1.010955] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
359[ 1.018256] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
360[ 1.025576] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
361[ 1.032866] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
362[ 1.039001] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
363[ 1.045135] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.052420] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
365[ 1.059716] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
366[ 1.067010] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
367[ 1.073138] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
368[ 1.079265] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
369[ 1.086550] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
370[ 1.093849] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
371[ 1.101143] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
372[ 1.109677] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
373[ 1.116128] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
374[ 1.122590] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
375[ 1.129041] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
376[ 1.135811] ACPI: Enabled 1 GPEs in block 00 to 1F
377[ 1.140935] vgaarb: setting as boot device: PCI:0000:01:04.0
378[ 1.146599] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
379[ 1.154695] vgaarb: loaded
380[ 1.157414] vgaarb: bridge control possible 0000:01:04.0
381[ 1.162895] PCI: Using ACPI for IRQ routing
382[ 1.167092] PCI: pci_cache_line_size set to 64 bytes
383[ 1.167148] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
384[ 1.167152] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
385[ 1.167459] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
386[ 1.174510] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
387[ 1.179582] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
388[ 1.188262] Switched to clocksource hpet
389[ 1.203884] pnp: PnP ACPI init
390[ 1.206989] ACPI: bus type PNP registered
391[ 1.211518] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
392[ 1.211604] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
393[ 1.211686] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.211783] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
395[ 1.211819] pnp 00:04: [dma 2]
396[ 1.211867] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
397[ 1.211898] pnp: PnP ACPI: found 5 devices
398[ 1.216012] ACPI: bus type PNP unregistered
399[ 1.228035] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7b730000-0x7b73ffff pref]: no compatible bridge window
400[ 1.237986] pci 0000:00:09.0: PCI bridge to [bus 01]
401[ 1.242961] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
402[ 1.249064] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
403[ 1.255854] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
404[ 1.263085] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
405[ 1.270311] pci 0000:00:0b.0: PCI bridge to [bus 02]
406[ 1.275286] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
407[ 1.282081] pci 0000:00:0c.0: PCI bridge to [bus 03]
408[ 1.287052] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
409[ 1.293845] pci 0000:00:0d.0: PCI bridge to [bus 04]
410[ 1.298820] pci 0000:00:0e.0: PCI bridge to [bus 05]
411[ 1.303793] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
412[ 1.303796] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
413[ 1.303799] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
414[ 1.303801] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
415[ 1.303804] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
416[ 1.303807] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
417[ 1.303810] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
418[ 1.303812] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
419[ 1.303815] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
420[ 1.303818] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
421[ 1.303961] NET: Registered protocol family 2
422[ 1.308864] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
423[ 1.316559] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
424[ 1.323894] TCP: Hash tables configured (established 65536 bind 65536)
425[ 1.330503] TCP: reno registered
426[ 1.333764] UDP hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.339973] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
428[ 1.346771] NET: Registered protocol family 1
429[ 1.351511] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
430[ 1.357585] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
431[ 1.363515] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.369042] pci 0000:00:00.0: Found enabled HT MSI Mapping
433[ 1.374583] pci 0000:00:0b.0: Found disabled HT MSI Mapping
434[ 1.380161] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.385711] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.391230] pci 0000:00:0c.0: Found disabled HT MSI Mapping
437[ 1.396815] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.402380] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.407899] pci 0000:00:0d.0: Found disabled HT MSI Mapping
440[ 1.413489] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.419034] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.424555] pci 0000:00:0e.0: Found disabled HT MSI Mapping
443[ 1.430143] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.435663] pci 0000:01:04.0: Video device with shadowed ROM
445[ 1.435672] PCI: CLS 64 bytes, default 64
446[ 1.435783] Unpacking initramfs...
447[ 1.819083] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
448[ 1.827016] PCI-DMA: Disabling AGP.
449[ 1.830694] PCI-DMA: aperture base @ b4000000 size 65536 KB
450[ 1.836279] PCI-DMA: using GART IOMMU.
451[ 1.840037] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
452[ 1.851951] platform rtc_cmos: registered platform RTC device (no PNP device found)
453[ 1.860115] microcode: CPU0: patch_level=0x01000084
454[ 1.865008] microcode: CPU1: patch_level=0x01000084
455[ 1.869910] microcode: CPU2: patch_level=0x01000084
456[ 1.874812] microcode: CPU3: patch_level=0x01000084
457[ 1.879718] microcode: CPU4: patch_level=0x01000084
458[ 1.884615] microcode: CPU5: patch_level=0x01000084
459[ 1.889507] microcode: CPU6: patch_level=0x01000084
460[ 1.894397] microcode: CPU7: patch_level=0x01000084
461[ 1.899378] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
462[ 1.908178] LVT offset 1 assigned for vector 0x400
463[ 1.912983] IBS: LVT offset 1 assigned
464[ 1.916773] perf: AMD IBS detected (0x00000007)
465[ 1.921935] futex hash table entries: 2048 (order: 5, 131072 bytes)
466[ 1.928324] audit: initializing netlink subsys (disabled)
467[ 1.933754] audit: type=2000 audit(1488647357.676:1): initialized
468[ 1.940627] HugeTLB registered 2 MB page size, pre-allocated 0 pages
469[ 1.947033] zbud: loaded
470[ 1.949944] VFS: Disk quotas dquot_6.5.2
471[ 1.953914] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
472[ 1.960454] msgmni has been set to 9945
473[ 1.964813] alg: No test for stdrng (krng)
474[ 1.968980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
475[ 1.976479] io scheduler noop registered
476[ 1.980415] io scheduler deadline registered
477[ 1.984766] io scheduler cfq registered (default)
478[ 1.989699] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
479[ 1.989824] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
480[ 1.989936] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
481[ 1.990042] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
482[ 1.990207] aer 0000:00:0b.0:pcie02: service driver aer loaded
483[ 1.990234] aer 0000:00:0c.0:pcie02: service driver aer loaded
484[ 1.990258] aer 0000:00:0d.0:pcie02: service driver aer loaded
485[ 1.990283] aer 0000:00:0e.0:pcie02: service driver aer loaded
486[ 1.990305] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
487[ 1.997276] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
488[ 2.003804] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
489[ 2.003814] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
490[ 2.010777] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
491[ 2.017309] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
492[ 2.017318] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
493[ 2.024285] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
494[ 2.024295] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
495[ 2.031258] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
496[ 2.031289] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
497[ 2.036891] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
498[ 2.043604] GHES: HEST is not enabled!
499[ 2.047499] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
500[ 2.074157] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
501[ 2.101830] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
502[ 2.109746] Linux agpgart interface v0.103
503[ 2.114056] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
504[ 2.124479] serio: i8042 KBD port at 0x60,0x64 irq 1
505[ 2.129458] serio: i8042 AUX port at 0x60,0x64 irq 12
506[ 2.134733] mousedev: PS/2 mouse device common for all mice
507[ 2.140411] rtc_cmos rtc_cmos: RTC can wake from S4
508[ 2.145548] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
509[ 2.151955] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
510[ 2.159814] ledtrig-cpu: registered to indicate activity on CPUs
511[ 2.166003] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
512[ 2.172450] AMD IOMMUv2 functionality not available on this system
513[ 2.178774] TCP: cubic registered
514[ 2.182245] NET: Registered protocol family 10
515[ 2.187132] mip6: Mobile IPv6
516[ 2.190123] NET: Registered protocol family 17
517[ 2.194651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
518[ 2.203297] mpls_gso: MPLS GSO support
519[ 2.207921] registered taskstats version 1
520[ 2.212786] rtc_cmos rtc_cmos: setting system clock to 2017-03-04 17:09:19 UTC (1488647359)
521[ 2.221211] PM: Hibernation image not present or could not be loaded.
522[ 2.222999] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
523[ 2.230855] Write protecting the kernel read-only data: 8192k
524[ 2.240068] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
525[ 2.248659] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
526[ 2.281446] systemd-udevd[99]: starting version 215
527[ 2.287182] random: systemd-udevd urandom read with 3 bits of entropy available
528[ 2.315966] SCSI subsystem initialized
529[ 2.320254] ACPI: bus type USB registered
530[ 2.324534] usbcore: registered new interface driver usbfs
531[ 2.330124] usbcore: registered new interface driver hub
532[ 2.334173] FDC 0 is a post-1991 82077
533[ 2.339630] pps_core: LinuxPPS API ver. 1 registered
534[ 2.340105] usbcore: registered new device driver usb
535[ 2.349678] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.359746] libata version 3.00 loaded.
537[ 2.360563] PTP clock support registered
538[ 2.360891] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
539[ 2.371625] pata_amd 0000:00:06.0: version 0.4.1
540[ 2.372103] ehci-pci: EHCI PCI platform driver
541[ 2.372490] scsi0 : pata_amd
542[ 2.379780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
543[ 2.379803] scsi1 : pata_amd
544[ 2.379893] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
545[ 2.379895] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
546[ 2.379987] sata_nv 0000:00:07.0: version 3.5
547[ 2.380287] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
548[ 2.380809] scsi2 : sata_nv
549[ 2.380967] scsi3 : sata_nv
550[ 2.381033] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
551[ 2.381035] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
552[ 2.381230] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
553[ 2.381673] scsi4 : sata_nv
554[ 2.381890] scsi5 : sata_nv
555[ 2.381962] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
556[ 2.381966] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
557[ 2.382236] ehci-pci 0000:00:02.1: EHCI Host Controller
558[ 2.382255] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
559[ 2.382271] ehci-pci 0000:00:02.1: debug port 1
560[ 2.382317] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
561[ 2.382344] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
562[ 2.391865] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
563[ 2.391936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
564[ 2.391938] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
565[ 2.391939] usb usb1: Product: EHCI Host Controller
566[ 2.391941] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
567[ 2.391942] usb usb1: SerialNumber: 0000:00:02.1
568[ 2.392249] hub 1-0:1.0: USB hub found
569[ 2.392259] hub 1-0:1.0: 10 ports detected
570[ 2.520584] tg3.c:v3.137 (May 11, 2014)
571[ 2.524491] tg3 0000:02:00.0: enabling device (0004 -> 0006)
572[ 2.530481] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
573[ 2.530603] ohci-pci: OHCI PCI platform driver
574[ 2.540770] ohci-pci 0000:00:02.0: OHCI PCI host controller
575[ 2.546372] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
576[ 2.553819] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
577[ 2.587008] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
578[ 2.597268] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
579[ 2.607003] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
580[ 2.614838] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
581[ 2.617046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
582[ 2.617048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
583[ 2.617050] usb usb2: Product: OHCI PCI host controller
584[ 2.617052] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
585[ 2.617053] usb usb2: SerialNumber: 0000:00:02.0
586[ 2.617355] hub 2-0:1.0: USB hub found
587[ 2.617398] hub 2-0:1.0: 10 ports detected
588[ 2.659466] tg3 0000:03:00.0: enabling device (0004 -> 0006)
589[ 2.665281] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
590[ 2.691768] ata3: SATA link down (SStatus 0 SControl 300)
591[ 2.691783] ata5: SATA link down (SStatus 0 SControl 300)
592[ 2.708177] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
593[ 2.718440] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
594[ 2.728183] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
595[ 2.736014] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
596[ 2.847706] tsc: Refined TSC clocksource calibration: 1909.786 MHz
597[ 3.019646] ata4: SATA link down (SStatus 0 SControl 300)
598[ 3.335534] ata6: SATA link down (SStatus 0 SControl 300)
599[ 3.359586] FS-Cache: Loaded
600[ 3.367575] RPC: Registered named UNIX socket transport module.
601[ 3.374674] RPC: Registered udp transport module.
602[ 3.380784] RPC: Registered tcp transport module.
603[ 3.386856] RPC: Registered tcp NFSv4.1 backchannel transport module.
604[ 3.400249] FS-Cache: Netfs 'nfs' registered for caching
605[ 3.416802] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
606[ 3.463601] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
607[ 3.851455] Switched to clocksource tsc
608[ 6.191074] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
609[ 6.197690] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
610[ 6.204574] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
611[ 6.608009] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
612[ 6.621731] systemd[1]: Detected architecture 'x86-64'.
613[ 6.666920] systemd[1]: Inserted module 'autofs4'
614[ 6.673186] systemd[1]: Set hostname to <cb-test-tgt>.
615[ 6.836295] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
616[ 6.849029] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
617[ 6.864427] systemd[1]: Expecting device dev-ttyS0.device...
618[ 6.878478] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
619[ 6.886263] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
620[ 6.893874] systemd[1]: Starting Remote File Systems (Pre).
621[ 6.910330] systemd[1]: Reached target Remote File Systems (Pre).
622[ 6.916469] systemd[1]: Starting Encrypted Volumes.
623[ 6.930413] systemd[1]: Reached target Encrypted Volumes.
624[ 6.935928] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
625[ 6.958344] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
626[ 6.967787] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
627[ 6.975852] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
628[ 6.983783] systemd[1]: Starting Paths.
629[ 6.998321] systemd[1]: Reached target Paths.
630[ 7.002720] systemd[1]: Starting Swap.
631[ 7.014297] systemd[1]: Reached target Swap.
632[ 7.018593] systemd[1]: Starting Root Slice.
633[ 7.030304] systemd[1]: Created slice Root Slice.
634[ 7.035031] systemd[1]: Starting User and Session Slice.
635[ 7.050283] systemd[1]: Created slice User and Session Slice.
636[ 7.056058] systemd[1]: Starting Delayed Shutdown Socket.
637[ 7.070287] systemd[1]: Listening on Delayed Shutdown Socket.
638[ 7.076059] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
639[ 7.094279] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
640[ 7.101268] systemd[1]: Starting Journal Socket (/dev/log).
641[ 7.118285] systemd[1]: Listening on Journal Socket (/dev/log).
642[ 7.124256] systemd[1]: Starting udev Kernel Socket.
643[ 7.138276] systemd[1]: Listening on udev Kernel Socket.
644[ 7.143632] systemd[1]: Starting udev Control Socket.
645[ 7.158255] systemd[1]: Listening on udev Control Socket.
646[ 7.163693] systemd[1]: Starting Journal Socket.
647[ 7.178246] systemd[1]: Listening on Journal Socket.
648[ 7.183275] systemd[1]: Starting System Slice.
649[ 7.198239] systemd[1]: Created slice System Slice.
650[ 7.203149] systemd[1]: Starting system-getty.slice.
651[ 7.218236] systemd[1]: Created slice system-getty.slice.
652[ 7.223655] systemd[1]: Starting system-serial\x2dgetty.slice.
653[ 7.238231] systemd[1]: Created slice system-serial\x2dgetty.slice.
654[ 7.244539] systemd[1]: Starting Increase datagram queue length...
655[ 7.263503] systemd[1]: Starting udev Coldplug all Devices...
656[ 7.295135] systemd[1]: Starting Load Kernel Modules...
657[ 7.313959] systemd[1]: Started Set Up Additional Binary Formats.
658[ 7.320224] systemd[1]: Mounting Debug File System...
659[ 7.335625] systemd[1]: Starting Create list of required static device nodes for the current kernel...
660[ 7.359275] systemd[1]: Mounting POSIX Message Queue File System...
661[ 7.375496] systemd[1]: Mounting Huge Pages File System...
662[ 7.391301] systemd[1]: Starting Slices.
663[ 7.406263] systemd[1]: Reached target Slices.
664[ 7.410814] systemd[1]: Starting Remount Root and Kernel File Systems...
665[ 7.438245] systemd[1]: Mounted Huge Pages File System.
666[ 7.454157] systemd[1]: Mounted POSIX Message Queue File System.
667[ 7.470175] systemd[1]: Mounted Debug File System.
668[ 7.486191] systemd[1]: Started Increase datagram queue length.
669[ 7.502210] systemd[1]: Started Load Kernel Modules.
670[ 7.522200] systemd[1]: Started Create list of required static device nodes for the current kernel.
671[ 7.546206] systemd[1]: Started Remount Root and Kernel File Systems.
672[ 7.562191] systemd[1]: Started udev Coldplug all Devices.
673[ 7.608105] systemd[1]: Started Various fixups to make systemd work better on Debian.
674[ 7.615994] systemd[1]: Starting Load/Save Random Seed...
675[ 7.632012] systemd[1]: Starting Create Static Device Nodes in /dev...
676[ 7.655592] systemd[1]: Starting Apply Kernel Variables...
677[ 7.672403] systemd[1]: Mounted Configuration File System.
678[ 7.678340] systemd[1]: Mounted FUSE Control File System.
679[ 7.683958] systemd[1]: Starting Syslog Socket.
680[ 7.698142] systemd[1]: Listening on Syslog Socket.
681[ 7.703093] systemd[1]: Starting Sockets.
682[ 7.718146] systemd[1]: Reached target Sockets.
683[ 7.722782] systemd[1]: Starting Journal Service...
684[ 7.746136] systemd[1]: Started Journal Service.
685[ 7.820649] systemd-udevd[212]: starting version 215
686[ 7.945112] systemd-journald[211]: Received request to flush runtime journal from PID 1
687[ 7.955860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
688[ 7.964931] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
689[ 7.974673] ACPI: Power Button [PWRB]
690[ 7.979820] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
691[ 7.980217] EDAC MC: Ver: 3.0.0
692[ 7.991932] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
693[ 7.992021] input: PC Speaker as /devices/platform/pcspkr/input/input4
694[ 7.992222] ACPI: Power Button [PWRF]
695[ 8.010427] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
696[ 8.020486] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
697[ 8.025977] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
698[ 8.033627] acpi-cpufreq: overriding BIOS provided _PSD data
699[ 8.039980] MCE: In-kernel MCE decoding enabled.
700[ 8.052001] AMD64 EDAC driver v3.4.0
701[ 8.057262] EDAC amd64: DRAM ECC enabled.
702[ 8.057284] kvm: Nested Virtualization enabled
703[ 8.057289] kvm: Nested Paging enabled
704[ 8.069518] EDAC amd64: F10h detected (node 0).
705[ 8.074099] EDAC MC: DCT0 chip selects:
706[ 8.074101] EDAC amd64: MC: 0: 0MB 1: 0MB
707[ 8.078811] EDAC amd64: MC: 2: 0MB 3: 0MB
708[ 8.083600] EDAC amd64: MC: 4: 0MB 5: 0MB
709[ 8.088340] EDAC amd64: MC: 6: 2048MB 7: 2048MB
710[ 8.093057] EDAC MC: DCT1 chip selects:
711[ 8.093060] EDAC amd64: MC: 0: 0MB 1: 0MB
712[ 8.097776] EDAC amd64: MC: 2: 0MB 3: 0MB
713[ 8.102400] EDAC amd64: MC: 4: 0MB 5: 0MB
714[ 8.107117] EDAC amd64: MC: 6: 1024MB 7: 1024MB
715[ 8.111822] EDAC amd64: using x4 syndromes.
716[ 8.116173] EDAC amd64: CS6: Registered DDR2 RAM
717[ 8.122126] EDAC amd64: CS7: Registered DDR2 RAM
718[ 8.128538] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
719[ 8.139010] EDAC amd64: DRAM ECC enabled.
720[ 8.143097] EDAC amd64: F10h detected (node 1).
721[ 8.147662] EDAC MC: DCT0 chip selects:
722[ 8.147665] EDAC amd64: MC: 0: 1024MB 1: 0MB
723[ 8.152366] EDAC amd64: MC: 2: 0MB 3: 0MB
724[ 8.157071] EDAC amd64: MC: 4: 0MB 5: 0MB
725[ 8.161778] EDAC amd64: MC: 6: 0MB 7: 0MB
726[ 8.166496] EDAC MC: DCT1 chip selects:
727[ 8.166497] EDAC amd64: MC: 0: 0MB 1: 0MB
728[ 8.166497] EDAC amd64: MC: 2: 0MB 3: 0MB
729[ 8.166498] EDAC amd64: MC: 4: 0MB 5: 0MB
730[ 8.166499] EDAC amd64: MC: 6: 0MB 7: 0MB
731[ 8.166501] EDAC amd64: using x4 syndromes.
732[ 8.166503] EDAC amd64: MCT channel count: 1
733[ 8.166545] EDAC amd64: CS0: Registered DDR2 RAM
734[ 8.166725] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
735[ 8.166914] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
736[ 8.298178] random: nonblocking pool is initialized
737[ 38.451723] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****