Gitiles
Code Review Sign In
review.coreboot.org / board-status / 2bc4cf352d833fde840581b0ce9e7b7a63504e18 / . / asus / kfsn4-dre / 4.3-776-g0793afe / 2016-04-19T22_26_06Z / kernel_log.txt
blob: 8c3c687de0718a6a0e4793be6c0fcc4fa48f5d9a [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 04/19/2016
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f0820-0x000f082f] mapped at [ffff8800000f0820]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB30E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB58D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB3280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619)
63[ 0.000000] ACPI: FACS 0x00000000BFFB3240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB59D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB6880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB68C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB6990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB6AE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB6B10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB6B50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB6CA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048376
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour VGA+ 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.795 MHz processor
182[ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.59 BogoMIPS (lpj=7639180)
183[ 0.010796] pid_max: default: 32768 minimum: 301
184[ 0.015442] ACPI: Core revision 20140424
185[ 0.021810] ACPI: All ACPI Tables successfully acquired
186[ 0.027161] Security Framework initialized
187[ 0.031288] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037132] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044846] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.057973] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067713] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074617] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082468] Initializing cgroup subsys memory
194[ 0.086856] Initializing cgroup subsys devices
195[ 0.091319] Initializing cgroup subsys freezer
196[ 0.095780] Initializing cgroup subsys net_cls
197[ 0.100247] Initializing cgroup subsys blkio
198[ 0.104549] Initializing cgroup subsys perf_event
199[ 0.109268] Initializing cgroup subsys net_prio
200[ 0.113848] tseg: 0000000000
201[ 0.113859] CPU: Physical Processor ID: 0
202[ 0.117878] CPU: Processor Core ID: 0
203[ 0.121552] mce: CPU supports 6 MCE banks
204[ 0.125589] LVT offset 0 assigned for vector 0xf9
205[ 0.130309] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145647] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
209[ 0.154662] ftrace: allocating 21614 entries in 85 pages
210[ 0.169994] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215519] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332510] Performance Events: AMD PMU driver.
213[ 0.337080] ... version: 0
214[ 0.341094] ... bit width: 48
215[ 0.345191] ... generic registers: 4
216[ 0.349203] ... value mask: 0000ffffffffffff
217[ 0.354512] ... max period: 00007fffffffffff
218[ 0.359832] ... fixed-purpose events: 0
219[ 0.363862] ... event mask: 000000000000000f
220[ 0.371712] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.379919] x86: Booting SMP configuration:
222[ 0.384110] .... node #0, CPUs: #1 #2 #3
223[ 0.428486] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581120] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585421] smpboot: Total of 8 processors activated (30557.61 BogoMIPS)
226[ 0.597926] devtmpfs: initialized
227[ 0.609224] pinctrl core: initialized pinctrl subsystem
228[ 0.614616] NET: Registered protocol family 16
229[ 0.619283] cpuidle: using governor ladder
230[ 0.623387] cpuidle: using governor menu
231[ 0.627323] node 0 link 1: io port [1000, 3fff]
232[ 0.627327] TOM: 00000000c0000000 aka 3072M
233[ 0.631519] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.631523] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.631527] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.631529] TOM2: 0000000180000000 aka 6144M
237[ 0.635808] bus: [bus 00-05] on node 0 link 1
238[ 0.635810] bus: 00 [io 0x0000-0xffff]
239[ 0.635812] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.635814] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.635922] ACPI: bus type PCI registered
242[ 0.639942] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.646553] PCI: Using configuration type 1 for base access
244[ 0.652130] PCI: Using configuration type 1 for extended access
245[ 0.669326] ACPI: Added _OSI(Module Device)
246[ 0.673523] ACPI: Added _OSI(Processor Device)
247[ 0.677974] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682685] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.691653] ACPI: Interpreter enabled
250[ 0.695341] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
251[ 0.704605] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
252[ 0.713869] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
253[ 0.723139] ACPI: (supports S0 S1 S5)
254[ 0.726810] ACPI: Using IOAPIC for interrupt routing
255[ 0.731819] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
256[ 0.759816] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
257[ 0.765993] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
258[ 0.774203] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
259[ 0.813478] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
260[ 0.823479] PCI host bridge to bus 0000:00
261[ 0.827588] pci_bus 0000:00: root bus resource [bus 00-05]
262[ 0.833070] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
263[ 0.839248] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
264[ 0.846126] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
265[ 0.853005] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
266[ 0.859884] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
267[ 0.866083] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
268[ 0.866269] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
269[ 0.866276] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
270[ 0.866411] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
271[ 0.866418] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
272[ 0.866445] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
273[ 0.866464] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
274[ 0.866512] pci 0000:00:01.1: PME# supported from D3hot D3cold
275[ 0.866611] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
276[ 0.866618] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
277[ 0.866670] pci 0000:00:02.0: supports D1 D2
278[ 0.866680] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
279[ 0.866727] pci 0000:00:02.0: System wakeup disabled by ACPI
280[ 0.872450] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
281[ 0.872465] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
282[ 0.872506] pci 0000:00:02.1: supports D1 D2
283[ 0.872508] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
284[ 0.872554] pci 0000:00:02.1: System wakeup disabled by ACPI
285[ 0.878286] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
286[ 0.878315] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
287[ 0.878327] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
288[ 0.885461] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
289[ 0.891993] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
290[ 0.899131] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
291[ 0.905756] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
292[ 0.905764] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
293[ 0.905769] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
294[ 0.905774] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
295[ 0.905778] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
296[ 0.905783] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
297[ 0.905788] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
298[ 0.905887] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
299[ 0.905897] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
300[ 0.905902] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
301[ 0.905906] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
302[ 0.905911] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
303[ 0.905915] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
304[ 0.905920] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
305[ 0.906034] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
306[ 0.906133] pci 0000:00:09.0: System wakeup disabled by ACPI
307[ 0.911855] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
308[ 0.911900] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.911947] pci 0000:00:0b.0: System wakeup disabled by ACPI
310[ 0.917668] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
311[ 0.917748] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
312[ 0.917805] pci 0000:00:0c.0: System wakeup disabled by ACPI
313[ 0.923529] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
314[ 0.923580] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.923641] pci 0000:00:0d.0: System wakeup disabled by ACPI
316[ 0.929364] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
317[ 0.929403] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
318[ 0.929471] pci 0000:00:0e.0: System wakeup disabled by ACPI
319[ 0.935214] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
320[ 0.935366] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
321[ 0.935472] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
322[ 0.935605] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
323[ 0.935740] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
324[ 0.935856] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
325[ 0.935971] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
326[ 0.936090] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
327[ 0.936216] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
328[ 0.936356] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
329[ 0.936548] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
330[ 0.936573] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
331[ 0.936593] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
332[ 0.936606] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
333[ 0.936651] pci 0000:01:04.0: supports D1 D2
334[ 0.936759] pci 0000:00:09.0: PCI bridge to [bus 01]
335[ 0.941731] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
336[ 0.941734] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
337[ 0.941738] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
338[ 0.941843] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
339[ 0.941905] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
340[ 0.941949] pci 0000:02:00.0: reg 0x30: [mem 0x7b620000-0x7b62ffff pref]
341[ 0.942027] pci 0000:02:00.0: PME# supported from D3hot D3cold
342[ 0.942146] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
343[ 0.952151] pci 0000:00:0b.0: PCI bridge to [bus 02]
344[ 0.957119] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
345[ 0.957217] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.957258] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
347[ 0.957363] pci 0000:03:00.0: PME# supported from D3hot D3cold
348[ 0.957458] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
349[ 0.967458] pci 0000:00:0c.0: PCI bridge to [bus 03]
350[ 0.972427] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
351[ 0.972503] pci 0000:00:0d.0: PCI bridge to [bus 04]
352[ 0.977540] pci 0000:00:0e.0: PCI bridge to [bus 05]
353[ 0.982527] pci_bus 0000:00: on NUMA node 0
354[ 0.982624] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
355[ 0.988772] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
356[ 0.994909] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
357[ 1.002212] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
358[ 1.009534] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
359[ 1.016835] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
360[ 1.024124] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
361[ 1.030250] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
362[ 1.036382] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
363[ 1.043682] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.050981] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.058284] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
366[ 1.064412] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
367[ 1.070544] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
368[ 1.077842] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
369[ 1.085130] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
370[ 1.092418] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
371[ 1.100949] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
372[ 1.107403] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
373[ 1.113887] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
374[ 1.120351] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
375[ 1.127116] ACPI: Enabled 1 GPEs in block 00 to 1F
376[ 1.132236] vgaarb: setting as boot device: PCI:0000:01:04.0
377[ 1.137901] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
378[ 1.145989] vgaarb: loaded
379[ 1.148705] vgaarb: bridge control possible 0000:01:04.0
380[ 1.154192] PCI: Using ACPI for IRQ routing
381[ 1.158387] PCI: pci_cache_line_size set to 64 bytes
382[ 1.158444] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
383[ 1.158448] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
384[ 1.158754] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
385[ 1.165812] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
386[ 1.170873] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
387[ 1.179558] Switched to clocksource hpet
388[ 1.195215] pnp: PnP ACPI init
389[ 1.198328] ACPI: bus type PNP registered
390[ 1.202857] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
391[ 1.202943] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
392[ 1.203026] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
393[ 1.203124] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.203161] pnp 00:04: [dma 2]
395[ 1.203209] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
396[ 1.203230] pnp: PnP ACPI: found 5 devices
397[ 1.207336] ACPI: bus type PNP unregistered
398[ 1.219374] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7b620000-0x7b62ffff pref]: no compatible bridge window
399[ 1.229331] pci 0000:00:09.0: PCI bridge to [bus 01]
400[ 1.234307] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
401[ 1.240408] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
402[ 1.247199] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
403[ 1.254431] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
404[ 1.261658] pci 0000:00:0b.0: PCI bridge to [bus 02]
405[ 1.266631] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
406[ 1.273424] pci 0000:00:0c.0: PCI bridge to [bus 03]
407[ 1.278397] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
408[ 1.285190] pci 0000:00:0d.0: PCI bridge to [bus 04]
409[ 1.290165] pci 0000:00:0e.0: PCI bridge to [bus 05]
410[ 1.295139] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
411[ 1.295141] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
412[ 1.295144] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
413[ 1.295146] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
414[ 1.295149] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
415[ 1.295152] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
416[ 1.295155] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
417[ 1.295157] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
418[ 1.295160] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
419[ 1.295163] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
420[ 1.295302] NET: Registered protocol family 2
421[ 1.300198] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
422[ 1.307893] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
423[ 1.315227] TCP: Hash tables configured (established 65536 bind 65536)
424[ 1.321827] TCP: reno registered
425[ 1.325084] UDP hash table entries: 4096 (order: 5, 131072 bytes)
426[ 1.331293] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.338080] NET: Registered protocol family 1
428[ 1.342825] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
429[ 1.348916] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
430[ 1.354831] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.360363] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.365878] pci 0000:00:0b.0: Found disabled HT MSI Mapping
433[ 1.371469] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.377013] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.382520] pci 0000:00:0c.0: Found disabled HT MSI Mapping
436[ 1.388098] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.393643] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.399154] pci 0000:00:0d.0: Found disabled HT MSI Mapping
439[ 1.404742] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.410276] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.415791] pci 0000:00:0e.0: Found disabled HT MSI Mapping
442[ 1.421376] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.426906] pci 0000:01:04.0: Video device with shadowed ROM
444[ 1.426915] PCI: CLS 64 bytes, default 64
445[ 1.427024] Unpacking initramfs...
446[ 1.810641] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
447[ 1.818589] PCI-DMA: Disabling AGP.
448[ 1.823698] PCI-DMA: aperture base @ b4000000 size 65536 KB
449[ 1.829278] PCI-DMA: using GART IOMMU.
450[ 1.833035] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
451[ 1.845349] platform rtc_cmos: registered platform RTC device (no PNP device found)
452[ 1.853519] microcode: CPU0: patch_level=0x01000084
453[ 1.858414] microcode: CPU1: patch_level=0x01000084
454[ 1.863308] microcode: CPU2: patch_level=0x01000084
455[ 1.868211] microcode: CPU3: patch_level=0x01000084
456[ 1.873114] microcode: CPU4: patch_level=0x01000084
457[ 1.878004] microcode: CPU5: patch_level=0x01000084
458[ 1.882899] microcode: CPU6: patch_level=0x01000084
459[ 1.887796] microcode: CPU7: patch_level=0x01000084
460[ 1.892790] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
461[ 1.901589] LVT offset 1 assigned for vector 0x400
462[ 1.906411] IBS: LVT offset 1 assigned
463[ 1.910198] perf: AMD IBS detected (0x00000007)
464[ 1.915363] futex hash table entries: 2048 (order: 5, 131072 bytes)
465[ 1.921752] audit: initializing netlink subsys (disabled)
466[ 1.927177] audit: type=2000 audit(1461125256.668:1): initialized
467[ 1.934051] HugeTLB registered 2 MB page size, pre-allocated 0 pages
468[ 1.940459] zbud: loaded
469[ 1.943371] VFS: Disk quotas dquot_6.5.2
470[ 1.947343] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
471[ 1.953883] msgmni has been set to 9945
472[ 1.958274] alg: No test for stdrng (krng)
473[ 1.962435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
474[ 1.969936] io scheduler noop registered
475[ 1.973875] io scheduler deadline registered
476[ 1.978222] io scheduler cfq registered (default)
477[ 1.983151] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
478[ 1.983284] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
479[ 1.983397] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
480[ 1.983514] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
481[ 1.983679] aer 0000:00:0b.0:pcie02: service driver aer loaded
482[ 1.983708] aer 0000:00:0c.0:pcie02: service driver aer loaded
483[ 1.983731] aer 0000:00:0d.0:pcie02: service driver aer loaded
484[ 1.983752] aer 0000:00:0e.0:pcie02: service driver aer loaded
485[ 1.983775] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
486[ 1.990741] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
487[ 1.997273] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
488[ 1.997283] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
489[ 2.004244] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
490[ 2.010779] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
491[ 2.010788] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
492[ 2.017752] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
493[ 2.017761] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
494[ 2.024726] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
495[ 2.024759] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
496[ 2.030372] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
497[ 2.037078] GHES: HEST is not enabled!
498[ 2.040973] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
499[ 2.067582] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
500[ 2.095273] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
501[ 2.103197] Linux agpgart interface v0.103
502[ 2.107507] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
503[ 2.117865] serio: i8042 KBD port at 0x60,0x64 irq 1
504[ 2.122926] serio: i8042 AUX port at 0x60,0x64 irq 12
505[ 2.128228] mousedev: PS/2 mouse device common for all mice
506[ 2.133907] rtc_cmos rtc_cmos: RTC can wake from S4
507[ 2.139039] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
508[ 2.145432] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
509[ 2.153290] ledtrig-cpu: registered to indicate activity on CPUs
510[ 2.159486] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
511[ 2.165928] AMD IOMMUv2 functionality not available on this system
512[ 2.172255] TCP: cubic registered
513[ 2.175735] NET: Registered protocol family 10
514[ 2.180651] mip6: Mobile IPv6
515[ 2.183647] NET: Registered protocol family 17
516[ 2.184040] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
517[ 2.196713] mpls_gso: MPLS GSO support
518[ 2.201316] registered taskstats version 1
519[ 2.206193] rtc_cmos rtc_cmos: setting system clock to 2016-04-20 04:07:38 UTC (1461125258)
520[ 2.214616] PM: Hibernation image not present or could not be loaded.
521[ 2.216448] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
522[ 2.224288] Write protecting the kernel read-only data: 8192k
523[ 2.233516] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
524[ 2.242103] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
525[ 2.276137] systemd-udevd[98]: starting version 215
526[ 2.281888] random: systemd-udevd urandom read with 3 bits of entropy available
527[ 2.311989] ACPI: bus type USB registered
528[ 2.316238] usbcore: registered new interface driver usbfs
529[ 2.321856] usbcore: registered new interface driver hub
530[ 2.327226] FDC 0 is a post-1991 82077
531[ 2.327385] usbcore: registered new device driver usb
532[ 2.336350] SCSI subsystem initialized
533[ 2.341172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
534[ 2.341587] pps_core: LinuxPPS API ver. 1 registered
535[ 2.341589] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.362847] PTP clock support registered
537[ 2.362970] ehci-pci: EHCI PCI platform driver
538[ 2.363307] ehci-pci 0000:00:02.1: EHCI Host Controller
539[ 2.363334] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
540[ 2.363352] ehci-pci 0000:00:02.1: debug port 1
541[ 2.363406] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
542[ 2.363437] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
543[ 2.375174] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
544[ 2.375263] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
545[ 2.375265] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
546[ 2.375266] usb usb1: Product: EHCI Host Controller
547[ 2.375267] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
548[ 2.375269] usb usb1: SerialNumber: 0000:00:02.1
549[ 2.375523] hub 1-0:1.0: USB hub found
550[ 2.375533] hub 1-0:1.0: 10 ports detected
551[ 2.437693] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
552[ 2.444576] libata version 3.00 loaded.
553[ 2.445366] ohci-pci: OHCI PCI platform driver
554[ 2.449884] tg3.c:v3.137 (May 11, 2014)
555[ 2.453781] tg3 0000:02:00.0: enabling device (0004 -> 0006)
556[ 2.459720] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
557[ 2.465710] ohci-pci 0000:00:02.0: OHCI PCI host controller
558[ 2.471301] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
559[ 2.478764] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
560[ 2.522327] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
561[ 2.532585] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
562[ 2.542322] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
563[ 2.550153] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
564[ 2.558977] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
565[ 2.565774] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
566[ 2.572998] usb usb2: Product: OHCI PCI host controller
567[ 2.578231] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
568[ 2.584329] usb usb2: SerialNumber: 0000:00:02.0
569[ 2.588982] tg3 0000:03:00.0: enabling device (0004 -> 0006)
570[ 2.594785] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
571[ 2.600777] hub 2-0:1.0: USB hub found
572[ 2.604542] hub 2-0:1.0: 10 ports detected
573[ 2.609012] sata_nv 0000:00:07.0: version 3.5
574[ 2.609310] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
575[ 2.615645] scsi0 : sata_nv
576[ 2.618691] scsi1 : sata_nv
577[ 2.621563] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
578[ 2.628704] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
579[ 2.636029] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
580[ 2.642191] scsi2 : sata_nv
581[ 2.645150] scsi3 : sata_nv
582[ 2.648017] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
583[ 2.655172] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
584[ 2.659148] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
585[ 2.659151] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
586[ 2.659153] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
587[ 2.659154] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
588[ 2.696951] pata_amd 0000:00:06.0: version 0.4.1
589[ 2.697667] scsi4 : pata_amd
590[ 2.700775] scsi5 : pata_amd
591[ 2.703801] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
592[ 2.710773] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
593[ 2.842994] tsc: Refined TSC clocksource calibration: 1909.787 MHz
594[ 2.946969] ata1: SATA link down (SStatus 0 SControl 300)
595[ 3.006968] ata3: SATA link down (SStatus 0 SControl 300)
596[ 3.262851] ata2: SATA link down (SStatus 0 SControl 300)
597[ 3.578741] ata4: SATA link down (SStatus 0 SControl 300)
598[ 3.772230] FS-Cache: Loaded
599[ 3.780243] RPC: Registered named UNIX socket transport module.
600[ 3.787313] RPC: Registered udp transport module.
601[ 3.793390] RPC: Registered tcp transport module.
602[ 3.799480] RPC: Registered tcp NFSv4.1 backchannel transport module.
603[ 3.813011] FS-Cache: Netfs 'nfs' registered for caching
604[ 3.830628] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
605[ 3.862817] Switched to clocksource tsc
606[ 3.878747] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
607[ 5.509739] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
608[ 5.516267] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
609[ 5.523149] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
610[ 6.787227] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
611[ 6.801250] systemd[1]: Detected architecture 'x86-64'.
612[ 7.119477] systemd[1]: Inserted module 'autofs4'
613[ 7.125502] systemd[1]: Set hostname to <cb-test-tgt>.
614[ 7.320271] random: nonblocking pool is initialized
615[ 7.591699] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
616[ 7.604432] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
617[ 7.619848] systemd[1]: Expecting device dev-ttyS0.device...
618[ 7.633503] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
619[ 7.641279] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
620[ 7.648889] systemd[1]: Starting Remote File Systems (Pre).
621[ 7.665455] systemd[1]: Reached target Remote File Systems (Pre).
622[ 7.671636] systemd[1]: Starting Encrypted Volumes.
623[ 7.685362] systemd[1]: Reached target Encrypted Volumes.
624[ 7.690826] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
625[ 7.713383] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
626[ 7.722827] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
627[ 7.730899] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
628[ 7.738829] systemd[1]: Starting Paths.
629[ 7.753346] systemd[1]: Reached target Paths.
630[ 7.757747] systemd[1]: Starting Swap.
631[ 7.769347] systemd[1]: Reached target Swap.
632[ 7.773646] systemd[1]: Starting Root Slice.
633[ 7.785347] systemd[1]: Created slice Root Slice.
634[ 7.790081] systemd[1]: Starting User and Session Slice.
635[ 7.805322] systemd[1]: Created slice User and Session Slice.
636[ 7.811096] systemd[1]: Starting Delayed Shutdown Socket.
637[ 7.825319] systemd[1]: Listening on Delayed Shutdown Socket.
638[ 7.831098] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
639[ 7.849302] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
640[ 7.856284] systemd[1]: Starting Journal Socket (/dev/log).
641[ 7.873304] systemd[1]: Listening on Journal Socket (/dev/log).
642[ 7.879267] systemd[1]: Starting udev Kernel Socket.
643[ 7.893295] systemd[1]: Listening on udev Kernel Socket.
644[ 7.898650] systemd[1]: Starting udev Control Socket.
645[ 7.913296] systemd[1]: Listening on udev Control Socket.
646[ 7.918740] systemd[1]: Starting Journal Socket.
647[ 7.933279] systemd[1]: Listening on Journal Socket.
648[ 7.938298] systemd[1]: Starting System Slice.
649[ 7.953269] systemd[1]: Created slice System Slice.
650[ 7.958183] systemd[1]: Starting system-getty.slice.
651[ 7.973279] systemd[1]: Created slice system-getty.slice.
652[ 7.978700] systemd[1]: Starting system-serial\x2dgetty.slice.
653[ 7.993272] systemd[1]: Created slice system-serial\x2dgetty.slice.
654[ 7.999596] systemd[1]: Starting Increase datagram queue length...
655[ 8.018778] systemd[1]: Starting udev Coldplug all Devices...
656[ 8.243582] systemd[1]: Starting Load Kernel Modules...
657[ 8.272407] systemd[1]: Started Set Up Additional Binary Formats.
658[ 8.278675] systemd[1]: Mounting Debug File System...
659[ 8.294638] systemd[1]: Starting Create list of required static device nodes for the current kernel...
660[ 8.318324] systemd[1]: Mounting POSIX Message Queue File System...
661[ 8.334335] systemd[1]: Mounting Huge Pages File System...
662[ 8.350021] systemd[1]: Starting Slices.
663[ 8.361206] systemd[1]: Reached target Slices.
664[ 8.365756] systemd[1]: Starting Remount Root and Kernel File Systems...
665[ 8.393192] systemd[1]: Mounted Huge Pages File System.
666[ 8.409192] systemd[1]: Mounted POSIX Message Queue File System.
667[ 8.425117] systemd[1]: Mounted Debug File System.
668[ 8.441154] systemd[1]: Started Increase datagram queue length.
669[ 8.457159] systemd[1]: Started Load Kernel Modules.
670[ 8.477183] systemd[1]: Started Create list of required static device nodes for the current kernel.
671[ 8.501155] systemd[1]: Started Remount Root and Kernel File Systems.
672[ 8.517090] systemd[1]: Started udev Coldplug all Devices.
673[ 8.562720] systemd[1]: Started Various fixups to make systemd work better on Debian.
674[ 8.570591] systemd[1]: Starting Load/Save Random Seed...
675[ 8.586742] systemd[1]: Starting Create Static Device Nodes in /dev...
676[ 8.606850] systemd[1]: Starting Apply Kernel Variables...
677[ 8.622695] systemd[1]: Mounted Configuration File System.
678[ 8.628427] systemd[1]: Mounted FUSE Control File System.
679[ 8.633940] systemd[1]: Starting Syslog Socket.
680[ 8.649089] systemd[1]: Listening on Syslog Socket.
681[ 8.654107] systemd[1]: Starting Sockets.
682[ 8.669097] systemd[1]: Reached target Sockets.
683[ 8.673694] systemd[1]: Starting Journal Service...
684[ 8.701118] systemd[1]: Started Journal Service.
685[ 8.967965] systemd-udevd[211]: starting version 215
686[ 9.236007] systemd-journald[207]: Received request to flush runtime journal from PID 1
687[ 9.733460] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
688[ 9.741289] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
689[ 9.749647] EDAC MC: Ver: 3.0.0
690[ 9.753496] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
691[ 9.753626] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
692[ 9.768621] ACPI: Power Button [PWRB]
693[ 9.773102] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
694[ 9.773447] input: PC Speaker as /devices/platform/pcspkr/input/input4
695[ 9.787133] ACPI: Power Button [PWRF]
696[ 9.794482] MCE: In-kernel MCE decoding enabled.
697[ 9.866011] AMD64 EDAC driver v3.4.0
698[ 9.869921] EDAC amd64: DRAM ECC enabled.
699[ 9.874446] EDAC amd64: F10h detected (node 0).
700[ 9.879352] EDAC MC: DCT0 chip selects:
701[ 9.879354] EDAC amd64: MC: 0: 0MB 1: 0MB
702[ 9.879491] acpi-cpufreq: overriding BIOS provided _PSD data
703[ 9.890041] EDAC amd64: MC: 2: 0MB 3: 0MB
704[ 9.894782] EDAC amd64: MC: 4: 0MB 5: 0MB
705[ 9.899541] EDAC amd64: MC: 6: 1024MB 7: 1024MB
706[ 9.904486] EDAC MC: DCT1 chip selects:
707[ 9.904488] EDAC amd64: MC: 0: 0MB 1: 0MB
708[ 9.909201] EDAC amd64: MC: 2: 0MB 3: 0MB
709[ 9.913918] EDAC amd64: MC: 4: 0MB 5: 0MB
710[ 9.918707] EDAC amd64: MC: 6: 1024MB 7: 1024MB
711[ 9.923420] EDAC amd64: using x4 syndromes.
712[ 9.927630] EDAC amd64: MCT channel count: 2
713[ 9.932000] EDAC amd64: CS6: Registered DDR2 RAM
714[ 9.936682] EDAC amd64: CS7: Registered DDR2 RAM
715[ 9.941857] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
716[ 9.951822] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
717[ 9.957304] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
718[ 9.962991] kvm: Nested Virtualization enabled
719[ 9.963064] EDAC amd64: DRAM ECC enabled.
720[ 9.971474] EDAC amd64: F10h detected (node 1).
721[ 9.971529] EDAC MC: DCT0 chip selects:
722[ 9.971531] EDAC amd64: MC: 0: 1024MB 1: 0MB
723[ 9.971533] EDAC amd64: MC: 2: 0MB 3: 0MB
724[ 9.971534] EDAC amd64: MC: 4: 0MB 5: 0MB
725[ 9.971535] kvm: Nested Paging enabled
726[ 9.971537] EDAC amd64: MC: 6: 0MB 7: 0MB
727[ 9.971538] EDAC MC: DCT1 chip selects:
728[ 9.971539] EDAC amd64: MC: 0: 0MB 1: 0MB
729[ 9.971540] EDAC amd64: MC: 2: 0MB 3: 0MB
730[ 9.971541] EDAC amd64: MC: 4: 0MB 5: 0MB
731[ 9.971542] EDAC amd64: MC: 6: 0MB 7: 0MB
732[ 9.971543] EDAC amd64: using x4 syndromes.
733[ 9.971544] EDAC amd64: MCT channel count: 1
734[ 9.971593] EDAC amd64: CS0: Registered DDR2 RAM
735[ 9.971865] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
736[ 9.971998] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
737[ 40.920500] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****