Paul Menzel | 2628571 | 2017-04-17 10:57:51 +0200 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03) |
| 5 | [ 0.000000] Command line: BOOT_IMAGE=/live/vmlinuz boot=live components quiet splash initrd=/live/initrd.img |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff97fff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000bff98000-0x00000000dfffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| 13 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable |
| 14 | [ 0.000000] NX (Execute Disable) protection: active |
| 15 | [ 0.000000] SMBIOS 2.7 present. |
| 16 | [ 0.000000] DMI: ASUS F2A85-M/F2A85-M, BIOS 4.5-771-gf3e2679-dirty 01/06/2017 |
| 17 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 18 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 19 | [ 0.000000] AGP: No AGP bridge found |
| 20 | [ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000 |
| 21 | [ 0.000000] MTRR default type: uncachable |
| 22 | [ 0.000000] MTRR fixed ranges enabled: |
| 23 | [ 0.000000] 00000-9FFFF write-back |
| 24 | [ 0.000000] A0000-BFFFF uncachable |
| 25 | [ 0.000000] C0000-FFFFF write-back |
| 26 | [ 0.000000] MTRR variable ranges enabled: |
| 27 | [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| 28 | [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| 29 | [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back |
| 30 | [ 0.000000] 3 disabled |
| 31 | [ 0.000000] 4 disabled |
| 32 | [ 0.000000] 5 disabled |
| 33 | [ 0.000000] 6 base 0000FF800000 mask FFFFFF800000 write-protect |
| 34 | [ 0.000000] 7 disabled |
| 35 | [ 0.000000] TOM2: 000000041f000000 aka 16880M |
| 36 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 37 | [ 0.000000] e820: last_pfn = 0xbff98 max_arch_pfn = 0x400000000 |
| 38 | [ 0.000000] found SMP MP-table at [mem 0x000f6ee0-0x000f6eef] mapped at [ffff8800000f6ee0] |
| 39 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 40 | [ 0.000000] Using GB pages for direct mapping |
| 41 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 42 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 43 | [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| 44 | [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| 45 | [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| 46 | [ 0.000000] init_memory_mapping: [mem 0x41ee00000-0x41effffff] |
| 47 | [ 0.000000] [mem 0x41ee00000-0x41effffff] page 2M |
| 48 | [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE |
| 49 | [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41edfffff] |
| 50 | [ 0.000000] [mem 0x41c000000-0x41edfffff] page 2M |
| 51 | [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] |
| 52 | [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M |
| 53 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff97fff] |
| 54 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 55 | [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| 56 | [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| 57 | [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| 58 | [ 0.000000] [mem 0xbfe00000-0xbff97fff] page 4k |
| 59 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] |
| 60 | [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G |
| 61 | [ 0.000000] RAMDISK: [mem 0x7e53a000-0x7fffffff] |
| 62 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 63 | [ 0.000000] ACPI: RSDP 0x00000000000F70F0 000024 (v02 CORE ) |
| 64 | [ 0.000000] ACPI: XSDT 0x00000000BFFAF0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 65 | [ 0.000000] ACPI: FACP 0x00000000BFFB0B10 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| 66 | [ 0.000000] ACPI: DSDT 0x00000000BFFAF280 00188F (v02 ASUS COREBOOT 00010001 INTL 20160831) |
| 67 | [ 0.000000] ACPI: FACS 0x00000000BFFAF240 000040 |
| 68 | [ 0.000000] ACPI: FACS 0x00000000BFFAF240 000040 |
| 69 | [ 0.000000] ACPI: SSDT 0x00000000BFFB0C10 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 70 | [ 0.000000] ACPI: TCPA 0x00000000BFFB0CA0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 71 | [ 0.000000] ACPI: APIC 0x00000000BFFB0CE0 000072 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 72 | [ 0.000000] ACPI: HPET 0x00000000BFFB0D60 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 73 | [ 0.000000] ACPI: HEST 0x00000000BFFB0DA0 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 74 | [ 0.000000] ACPI: IVRS 0x00000000BFFB0F70 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) |
| 75 | [ 0.000000] ACPI: SSDT 0x00000000BFFB0FE0 00051F (v02 AMD ALIB 00000001 MSFT 04000000) |
| 76 | [ 0.000000] ACPI: SSDT 0x00000000BFFB1500 000B9C (v01 AMD POWERNOW 00000001 AMD 00000001) |
| 77 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 78 | [ 0.000000] No NUMA configuration found |
| 79 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff] |
| 80 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41effffff] |
| 81 | [ 0.000000] NODE_DATA [mem 0x41eff9000-0x41effdfff] |
| 82 | [ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040ee00000-ffff88041c7fffff] on node 0 |
| 83 | [ 0.000000] Zone ranges: |
| 84 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 85 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 86 | [ 0.000000] Normal [mem 0x100000000-0x41effffff] |
| 87 | [ 0.000000] Movable zone start for each node |
| 88 | [ 0.000000] Early memory node ranges |
| 89 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 90 | [ 0.000000] node 0: [mem 0x00100000-0xbff97fff] |
| 91 | [ 0.000000] node 0: [mem 0x100000000-0x41effffff] |
| 92 | [ 0.000000] On node 0 totalpages: 4058934 |
| 93 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 94 | [ 0.000000] DMA zone: 21 pages reserved |
| 95 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 96 | [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| 97 | [ 0.000000] DMA32 zone: 782232 pages, LIFO batch:31 |
| 98 | [ 0.000000] Normal zone: 44744 pages used for memmap |
| 99 | [ 0.000000] Normal zone: 3272704 pages, LIFO batch:31 |
| 100 | [ 0.000000] ACPI: PM-Timer IO Port: 0x818 |
| 101 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 102 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) |
| 103 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) |
| 104 | [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) |
| 105 | [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) |
| 106 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| 107 | [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) |
| 108 | [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 |
| 109 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 110 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| 111 | [ 0.000000] ACPI: IRQ0 used by override. |
| 112 | [ 0.000000] ACPI: IRQ2 used by override. |
| 113 | [ 0.000000] ACPI: IRQ9 used by override. |
| 114 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 115 | [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 |
| 116 | [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 117 | [ 0.000000] nr_irqs_gsi: 40 |
| 118 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 119 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 120 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 121 | [ 0.000000] PM: Registered nosave memory: [mem 0xbff98000-0xdfffffff] |
| 122 | [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| 123 | [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| 124 | [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff] |
| 125 | [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| 126 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 127 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| 128 | [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041ec00000 s80960 r8192 d21440 u524288 |
| 129 | [ 0.000000] pcpu-alloc: s80960 r8192 d21440 u524288 alloc=1*2097152 |
| 130 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| 131 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4003418 |
| 132 | [ 0.000000] Policy zone: Normal |
| 133 | [ 0.000000] Kernel command line: BOOT_IMAGE=/live/vmlinuz boot=live components quiet splash initrd=/live/initrd.img |
| 134 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 135 | [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 |
| 136 | [ 0.000000] AGP: Checking aperture... |
| 137 | [ 0.000000] AGP: No AGP bridge found |
| 138 | [ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB) |
| 139 | [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| 140 | [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| 141 | [ 0.000000] AGP: This costs you 64MB of RAM |
| 142 | [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| 143 | [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| 144 | [ 0.000000] Memory: 15841464K/16235736K available (5237K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 394272K reserved) |
| 145 | [ 0.000000] Hierarchical RCU implementation. |
| 146 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 147 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| 148 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| 149 | [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| 150 | [ 0.000000] Console: colour VGA+ 80x25 |
| 151 | [ 0.000000] console [tty0] enabled |
| 152 | [ 0.000000] hpet clockevent registered |
| 153 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 154 | [ 0.000000] tsc: Detected 3693.440 MHz processor |
| 155 | [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 7386.88 BogoMIPS (lpj=14773760) |
| 156 | [ 0.000024] pid_max: default: 32768 minimum: 301 |
| 157 | [ 0.000032] ACPI: Core revision 20140424 |
| 158 | [ 0.001433] ACPI: All ACPI Tables successfully acquired |
| 159 | [ 0.001459] Security Framework initialized |
| 160 | [ 0.001469] AppArmor: AppArmor disabled by boot time parameter |
| 161 | [ 0.001471] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 162 | [ 0.002454] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| 163 | [ 0.003033] spurious 8259A interrupt: IRQ7. |
| 164 | [ 0.006623] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 165 | [ 0.008490] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| 166 | [ 0.008509] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| 167 | [ 0.008823] Initializing cgroup subsys memory |
| 168 | [ 0.008829] Initializing cgroup subsys devices |
| 169 | [ 0.008836] Initializing cgroup subsys freezer |
| 170 | [ 0.008839] Initializing cgroup subsys net_cls |
| 171 | [ 0.008843] Initializing cgroup subsys blkio |
| 172 | [ 0.008847] Initializing cgroup subsys perf_event |
| 173 | [ 0.008849] Initializing cgroup subsys net_prio |
| 174 | [ 0.008871] tseg: 0000000000 |
| 175 | [ 0.008876] CPU: Physical Processor ID: 0 |
| 176 | [ 0.008877] CPU: Processor Core ID: 0 |
| 177 | [ 0.008879] mce: CPU supports 7 MCE banks |
| 178 | [ 0.008890] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 |
| 179 | Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 |
| 180 | tlb_flushall_shift: 6 |
| 181 | [ 0.008959] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| 182 | [ 0.009699] ftrace: allocating 21697 entries in 85 pages |
| 183 | [ 0.101079] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 184 | [ 0.140729] smpboot: CPU0: AMD A10-6700 APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01) |
| 185 | [ 0.246814] Performance Events: Fam15h core perfctr, AMD PMU driver. |
| 186 | [ 0.246818] ... version: 0 |
| 187 | [ 0.246819] ... bit width: 48 |
| 188 | [ 0.246820] ... generic registers: 6 |
| 189 | [ 0.246821] ... value mask: 0000ffffffffffff |
| 190 | [ 0.246822] ... max period: 00007fffffffffff |
| 191 | [ 0.246823] ... fixed-purpose events: 0 |
| 192 | [ 0.246824] ... event mask: 000000000000003f |
| 193 | [ 0.248199] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 194 | [ 0.248307] x86: Booting SMP configuration: |
| 195 | [ 0.248308] .... node #0, CPUs: #1 #2 #3 |
| 196 | [ 0.287596] x86: Booted up 1 node, 4 CPUs |
| 197 | [ 0.287599] smpboot: Total of 4 processors activated (29547.52 BogoMIPS) |
| 198 | [ 0.288359] devtmpfs: initialized |
| 199 | [ 0.294022] pinctrl core: initialized pinctrl subsystem |
| 200 | [ 0.294110] NET: Registered protocol family 16 |
| 201 | [ 0.294232] cpuidle: using governor ladder |
| 202 | [ 0.294235] cpuidle: using governor menu |
| 203 | [ 0.294287] ACPI: bus type PCI registered |
| 204 | [ 0.294289] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 205 | [ 0.294376] PCI: Using configuration type 1 for base access |
| 206 | [ 0.294377] PCI: Using configuration type 1 for extended access |
| 207 | [ 0.307409] ACPI: Added _OSI(Module Device) |
| 208 | [ 0.307411] ACPI: Added _OSI(Processor Device) |
| 209 | [ 0.307413] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 210 | [ 0.307414] ACPI: Added _OSI(Processor Aggregator Device) |
| 211 | [ 0.308322] ACPI: Executed 2 blocks of module-level executable AML code |
| 212 | [ 0.310571] ACPI: Interpreter enabled |
| 213 | [ 0.310593] ACPI: (supports S0 S1 S2 S3 S4 S5) |
| 214 | [ 0.310594] ACPI: Using IOAPIC for interrupt routing |
| 215 | [ 0.310608] HEST: Table parsing has been initialized. |
| 216 | [ 0.310611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 217 | [ 0.313013] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 218 | [ 0.313018] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 219 | [ 0.313100] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 220 | [ 0.313173] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored |
| 221 | [ 0.313366] PCI host bridge to bus 0000:00 |
| 222 | [ 0.313369] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 223 | [ 0.313371] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 224 | [ 0.313373] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| 225 | [ 0.313374] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 226 | [ 0.313376] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] |
| 227 | [ 0.313377] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| 228 | [ 0.313384] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 |
| 229 | [ 0.313476] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600 |
| 230 | [ 0.313586] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400 |
| 231 | [ 0.313627] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold |
| 232 | [ 0.313673] pci 0000:00:02.0: System wakeup disabled by ACPI |
| 233 | [ 0.313728] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 |
| 234 | [ 0.313742] pci 0000:00:11.0: reg 0x10: [io 0x3010-0x3017] |
| 235 | [ 0.313750] pci 0000:00:11.0: reg 0x14: [io 0x3020-0x3023] |
| 236 | [ 0.313758] pci 0000:00:11.0: reg 0x18: [io 0x3018-0x301f] |
| 237 | [ 0.313766] pci 0000:00:11.0: reg 0x1c: [io 0x3024-0x3027] |
| 238 | [ 0.313773] pci 0000:00:11.0: reg 0x20: [io 0x3000-0x300f] |
| 239 | [ 0.313781] pci 0000:00:11.0: reg 0x24: [mem 0xf3288000-0xf32887ff] |
| 240 | [ 0.313878] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 |
| 241 | [ 0.313889] pci 0000:00:12.0: reg 0x10: [mem 0xf3284000-0xf3284fff] |
| 242 | [ 0.313972] pci 0000:00:12.0: System wakeup disabled by ACPI |
| 243 | [ 0.314016] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 |
| 244 | [ 0.314032] pci 0000:00:12.2: reg 0x10: [mem 0xf3289000-0xf32890ff] |
| 245 | [ 0.314098] pci 0000:00:12.2: supports D1 D2 |
| 246 | [ 0.314100] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| 247 | [ 0.314144] pci 0000:00:12.2: System wakeup disabled by ACPI |
| 248 | [ 0.314188] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 |
| 249 | [ 0.314199] pci 0000:00:13.0: reg 0x10: [mem 0xf3285000-0xf3285fff] |
| 250 | [ 0.314282] pci 0000:00:13.0: System wakeup disabled by ACPI |
| 251 | [ 0.314327] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 |
| 252 | [ 0.314343] pci 0000:00:13.2: reg 0x10: [mem 0xf328a000-0xf328a0ff] |
| 253 | [ 0.314409] pci 0000:00:13.2: supports D1 D2 |
| 254 | [ 0.314410] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| 255 | [ 0.314457] pci 0000:00:13.2: System wakeup disabled by ACPI |
| 256 | [ 0.314501] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 |
| 257 | [ 0.314624] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 |
| 258 | [ 0.314641] pci 0000:00:14.2: reg 0x10: [mem 0xf3280000-0xf3283fff 64bit] |
| 259 | [ 0.314694] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| 260 | [ 0.314777] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 |
| 261 | [ 0.314898] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 |
| 262 | [ 0.314957] pci 0000:00:14.4: System wakeup disabled by ACPI |
| 263 | [ 0.314997] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310 |
| 264 | [ 0.315008] pci 0000:00:14.5: reg 0x10: [mem 0xf3286000-0xf3286fff] |
| 265 | [ 0.315090] pci 0000:00:14.5: System wakeup disabled by ACPI |
| 266 | [ 0.315135] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 |
| 267 | [ 0.315193] pci 0000:00:15.0: supports D1 D2 |
| 268 | [ 0.315240] pci 0000:00:15.0: System wakeup disabled by ACPI |
| 269 | [ 0.315283] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400 |
| 270 | [ 0.315344] pci 0000:00:15.1: supports D1 D2 |
| 271 | [ 0.315391] pci 0000:00:15.1: System wakeup disabled by ACPI |
| 272 | [ 0.315435] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310 |
| 273 | [ 0.315446] pci 0000:00:16.0: reg 0x10: [mem 0xf3287000-0xf3287fff] |
| 274 | [ 0.315529] pci 0000:00:16.0: System wakeup disabled by ACPI |
| 275 | [ 0.315574] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320 |
| 276 | [ 0.315591] pci 0000:00:16.2: reg 0x10: [mem 0xf328b000-0xf328b0ff] |
| 277 | [ 0.315657] pci 0000:00:16.2: supports D1 D2 |
| 278 | [ 0.315658] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot |
| 279 | [ 0.315703] pci 0000:00:16.2: System wakeup disabled by ACPI |
| 280 | [ 0.315745] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 |
| 281 | [ 0.315820] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 |
| 282 | [ 0.315892] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 |
| 283 | [ 0.315967] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 |
| 284 | [ 0.316044] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 |
| 285 | [ 0.316116] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 |
| 286 | [ 0.316246] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000 |
| 287 | [ 0.316258] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff] |
| 288 | [ 0.316270] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] |
| 289 | [ 0.316282] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] |
| 290 | [ 0.316290] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f] |
| 291 | [ 0.316298] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref] |
| 292 | [ 0.316408] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300 |
| 293 | [ 0.316420] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff] |
| 294 | [ 0.326529] pci 0000:00:02.0: PCI bridge to [bus 01] |
| 295 | [ 0.326536] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] |
| 296 | [ 0.326539] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf30fffff] |
| 297 | [ 0.326542] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] |
| 298 | [ 0.326637] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) |
| 299 | [ 0.326645] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| 300 | [ 0.326647] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) |
| 301 | [ 0.326649] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| 302 | [ 0.326651] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) |
| 303 | [ 0.326652] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| 304 | [ 0.326707] pci 0000:00:15.0: PCI bridge to [bus 03] |
| 305 | [ 0.326793] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 |
| 306 | [ 0.326814] pci 0000:04:00.0: reg 0x10: [io 0x2000-0x20ff] |
| 307 | [ 0.326841] pci 0000:04:00.0: reg 0x18: [mem 0xf3104000-0xf3104fff 64bit pref] |
| 308 | [ 0.326858] pci 0000:04:00.0: reg 0x20: [mem 0xf3100000-0xf3103fff 64bit pref] |
| 309 | [ 0.326951] pci 0000:04:00.0: supports D1 D2 |
| 310 | [ 0.326953] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 311 | [ 0.338515] pci 0000:00:15.1: PCI bridge to [bus 04] |
| 312 | [ 0.338523] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] |
| 313 | [ 0.338530] pci 0000:00:15.1: bridge window [mem 0xf3100000-0xf31fffff 64bit pref] |
| 314 | [ 0.338804] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 315 | [ 0.338851] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 316 | [ 0.338896] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 317 | [ 0.338941] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 318 | [ 0.338984] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 319 | [ 0.339028] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0 |
| 320 | [ 0.339069] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 321 | [ 0.339112] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| 322 | [ 0.339200] ACPI: Enabled 5 GPEs in block 00 to 1F |
| 323 | [ 0.339325] vgaarb: setting as boot device: PCI:0000:01:00.0 |
| 324 | [ 0.339327] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none |
| 325 | [ 0.339329] vgaarb: loaded |
| 326 | [ 0.339330] vgaarb: bridge control possible 0000:01:00.0 |
| 327 | [ 0.339397] PCI: Using ACPI for IRQ routing |
| 328 | [ 0.339399] PCI: pci_cache_line_size set to 64 bytes |
| 329 | [ 0.339449] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 330 | [ 0.339451] e820: reserve RAM buffer [mem 0xbff98000-0xbfffffff] |
| 331 | [ 0.339452] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] |
| 332 | [ 0.339595] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| 333 | [ 0.339598] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| 334 | [ 0.341678] Switched to clocksource hpet |
| 335 | [ 0.348230] pnp: PnP ACPI init |
| 336 | [ 0.348242] ACPI: bus type PNP registered |
| 337 | [ 0.348408] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved |
| 338 | [ 0.348411] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 339 | [ 0.348453] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 340 | [ 0.348571] pnp: PnP ACPI: found 2 devices |
| 341 | [ 0.348572] ACPI: bus type PNP unregistered |
| 342 | [ 0.355303] pci 0000:00:02.0: PCI bridge to [bus 01] |
| 343 | [ 0.355306] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] |
| 344 | [ 0.355310] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf30fffff] |
| 345 | [ 0.355313] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] |
| 346 | [ 0.355316] pci 0000:00:14.4: PCI bridge to [bus 02] |
| 347 | [ 0.355325] pci 0000:00:15.0: PCI bridge to [bus 03] |
| 348 | [ 0.355333] pci 0000:00:15.1: PCI bridge to [bus 04] |
| 349 | [ 0.355336] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] |
| 350 | [ 0.355341] pci 0000:00:15.1: bridge window [mem 0xf3100000-0xf31fffff 64bit pref] |
| 351 | [ 0.355346] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 352 | [ 0.355347] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 353 | [ 0.355349] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 354 | [ 0.355350] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] |
| 355 | [ 0.355352] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff] |
| 356 | [ 0.355354] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| 357 | [ 0.355355] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff] |
| 358 | [ 0.355356] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] |
| 359 | [ 0.355358] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] |
| 360 | [ 0.355360] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] |
| 361 | [ 0.355361] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] |
| 362 | [ 0.355363] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] |
| 363 | [ 0.355364] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xffffffff] |
| 364 | [ 0.355366] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] |
| 365 | [ 0.355367] pci_bus 0000:04: resource 2 [mem 0xf3100000-0xf31fffff 64bit pref] |
| 366 | [ 0.355486] NET: Registered protocol family 2 |
| 367 | [ 0.355791] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| 368 | [ 0.356099] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 369 | [ 0.356307] TCP: Hash tables configured (established 131072 bind 65536) |
| 370 | [ 0.356341] TCP: reno registered |
| 371 | [ 0.356363] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| 372 | [ 0.356441] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| 373 | [ 0.356614] NET: Registered protocol family 1 |
| 374 | [ 0.410929] pci 0000:01:00.0: Video device with shadowed ROM |
| 375 | [ 0.410945] PCI: CLS 64 bytes, default 64 |
| 376 | [ 0.411007] Unpacking initramfs... |
| 377 | [ 0.797549] Freeing initrd memory: 27416K (ffff88007e53a000 - ffff880080000000) |
| 378 | [ 0.797576] AMD-Vi: Applying erratum 746 workaround for IOMMU at 0000:00:00.2 |
| 379 | [ 0.797848] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 |
| 380 | [ 0.797849] AMD-Vi: Extended features: PreF PPR GT IA |
| 381 | [ 0.797852] AMD-Vi: Interrupt remapping enabled |
| 382 | [ 0.797864] pci 0000:00:00.2: irq 40 for MSI/MSI-X |
| 383 | [ 0.808471] AMD-Vi: Lazy IO/TLB flushing enabled |
| 384 | [ 0.808895] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 385 | [ 0.808898] software IO TLB [mem 0xbbf98000-0xbff98000] (64MB) mapped at [ffff8800bbf98000-ffff8800bff97fff] |
| 386 | [ 0.809120] perf: AMD NB counters detected |
| 387 | [ 0.809183] microcode: CPU0: patch_level=0x00000000 |
| 388 | [ 0.809191] microcode: CPU1: patch_level=0x00000000 |
| 389 | [ 0.809196] microcode: CPU2: patch_level=0x00000000 |
| 390 | [ 0.809204] microcode: CPU3: patch_level=0x00000000 |
| 391 | [ 0.809281] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 392 | [ 0.809286] LVT offset 0 assigned for vector 0x400 |
| 393 | [ 0.809299] perf: AMD IBS detected (0x000000ff) |
| 394 | [ 0.809607] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| 395 | [ 0.809655] audit: initializing netlink subsys (disabled) |
| 396 | [ 0.809676] audit: type=2000 audit(1483912766.624:1): initialized |
| 397 | [ 0.810127] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 398 | [ 0.810151] zbud: loaded |
| 399 | [ 0.810346] VFS: Disk quotas dquot_6.5.2 |
| 400 | [ 0.810366] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 401 | [ 0.810422] msgmni has been set to 30993 |
| 402 | [ 0.810739] alg: No test for stdrng (krng) |
| 403 | [ 0.810768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 404 | [ 0.810821] io scheduler noop registered |
| 405 | [ 0.810823] io scheduler deadline registered |
| 406 | [ 0.810863] io scheduler cfq registered (default) |
| 407 | [ 0.810945] pcieport 0000:00:02.0: device [1022:1412] has invalid IRQ; check vendor BIOS |
| 408 | [ 0.811065] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X |
| 409 | [ 0.811141] pcieport 0000:00:15.0: irq 42 for MSI/MSI-X |
| 410 | [ 0.811215] pcieport 0000:00:15.1: irq 43 for MSI/MSI-X |
| 411 | [ 0.811300] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt |
| 412 | [ 0.811302] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| 413 | [ 0.811304] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt |
| 414 | [ 0.811306] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded |
| 415 | [ 0.811321] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt |
| 416 | [ 0.811325] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded |
| 417 | [ 0.811339] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt |
| 418 | [ 0.811340] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt |
| 419 | [ 0.811343] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded |
| 420 | [ 0.811360] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 421 | [ 0.811378] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 422 | [ 0.811435] GHES: Failed to enable APEI firmware first mode. |
| 423 | [ 0.811561] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 424 | [ 0.831899] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 425 | [ 0.832239] Linux agpgart interface v0.103 |
| 426 | [ 0.832333] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| 427 | [ 1.081158] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 428 | [ 1.081337] mousedev: PS/2 mouse device common for all mice |
| 429 | [ 1.081378] rtc_cmos 00:01: RTC can wake from S4 |
| 430 | [ 1.081518] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 |
| 431 | [ 1.081548] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs |
| 432 | [ 1.081572] ledtrig-cpu: registered to indicate activity on CPUs |
| 433 | [ 1.081656] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 434 | [ 1.081786] TCP: cubic registered |
| 435 | [ 1.081853] NET: Registered protocol family 10 |
| 436 | [ 1.082042] mip6: Mobile IPv6 |
| 437 | [ 1.082046] NET: Registered protocol family 17 |
| 438 | [ 1.082051] mpls_gso: MPLS GSO support |
| 439 | [ 1.082466] registered taskstats version 1 |
| 440 | [ 1.082899] rtc_cmos 00:01: setting system clock to 2017-01-08 21:59:27 UTC (1483912767) |
| 441 | [ 1.082944] PM: Hibernation image not present or could not be loaded. |
| 442 | [ 1.083713] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| 443 | [ 1.083715] Write protecting the kernel read-only data: 8192k |
| 444 | [ 1.084131] Freeing unused kernel memory: 896K (ffff880001520000 - ffff880001600000) |
| 445 | [ 1.084871] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000) |
| 446 | [ 1.094862] systemd-udevd[73]: starting version 215 |
| 447 | [ 1.095149] random: systemd-udevd urandom read with 4 bits of entropy available |
| 448 | [ 1.106638] SCSI subsystem initialized |
| 449 | [ 1.107024] ACPI: bus type USB registered |
| 450 | [ 1.107053] usbcore: registered new interface driver usbfs |
| 451 | [ 1.107066] usbcore: registered new interface driver hub |
| 452 | [ 1.107153] usbcore: registered new device driver usb |
| 453 | [ 1.107803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 454 | [ 1.108042] libata version 3.00 loaded. |
| 455 | [ 1.108100] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 456 | [ 1.108313] ehci-pci: EHCI PCI platform driver |
| 457 | [ 1.108473] QUIRK: Enable AMD PLL fix |
| 458 | [ 1.108498] ehci-pci 0000:00:12.2: EHCI Host Controller |
| 459 | [ 1.108504] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| 460 | [ 1.108510] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 461 | [ 1.108520] ehci-pci 0000:00:12.2: debug port 1 |
| 462 | [ 1.108570] ehci-pci 0000:00:12.2: irq 17, io mem 0xf3289000 |
| 463 | [ 1.110117] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| 464 | [ 1.110352] r8169 0000:04:00.0: irq 44 for MSI/MSI-X |
| 465 | [ 1.110565] r8169 0000:04:00.0 eth0: RTL8168f/8111f at 0xffffc900018f6000, 50:46:5d:b3:56:ff, XID 08000800 IRQ 44 |
| 466 | [ 1.110568] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| 467 | [ 1.111662] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 468 | [ 1.116972] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| 469 | [ 1.117062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 470 | [ 1.117065] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 471 | [ 1.117067] usb usb1: Product: EHCI Host Controller |
| 472 | [ 1.117069] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| 473 | [ 1.117070] usb usb1: SerialNumber: 0000:00:12.2 |
| 474 | [ 1.117235] hub 1-0:1.0: USB hub found |
| 475 | [ 1.117244] hub 1-0:1.0: 5 ports detected |
| 476 | [ 1.117586] ehci-pci 0000:00:13.2: EHCI Host Controller |
| 477 | [ 1.117594] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| 478 | [ 1.117598] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 479 | [ 1.117610] ehci-pci 0000:00:13.2: debug port 1 |
| 480 | [ 1.117646] ehci-pci 0000:00:13.2: irq 17, io mem 0xf328a000 |
| 481 | [ 1.129118] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| 482 | [ 1.129247] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 483 | [ 1.129251] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 484 | [ 1.129253] usb usb2: Product: EHCI Host Controller |
| 485 | [ 1.129254] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| 486 | [ 1.129256] usb usb2: SerialNumber: 0000:00:13.2 |
| 487 | [ 1.129484] hub 2-0:1.0: USB hub found |
| 488 | [ 1.129497] hub 2-0:1.0: 5 ports detected |
| 489 | [ 1.129822] ehci-pci 0000:00:16.2: EHCI Host Controller |
| 490 | [ 1.129828] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 |
| 491 | [ 1.129832] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 492 | [ 1.129841] ehci-pci 0000:00:16.2: debug port 1 |
| 493 | [ 1.129871] ehci-pci 0000:00:16.2: irq 17, io mem 0xf328b000 |
| 494 | [ 1.141081] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 |
| 495 | [ 1.141197] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| 496 | [ 1.141201] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 497 | [ 1.141203] usb usb3: Product: EHCI Host Controller |
| 498 | [ 1.141204] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| 499 | [ 1.141205] usb usb3: SerialNumber: 0000:00:16.2 |
| 500 | [ 1.141362] hub 3-0:1.0: USB hub found |
| 501 | [ 1.141373] hub 3-0:1.0: 4 ports detected |
| 502 | [ 1.141567] ahci 0000:00:11.0: version 3.0 |
| 503 | [ 1.141817] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode |
| 504 | [ 1.141820] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio |
| 505 | [ 1.141864] ohci-pci: OHCI PCI platform driver |
| 506 | [ 1.143560] scsi0 : ahci |
| 507 | [ 1.143708] scsi1 : ahci |
| 508 | [ 1.143830] scsi2 : ahci |
| 509 | [ 1.143960] scsi3 : ahci |
| 510 | [ 1.144095] scsi4 : ahci |
| 511 | [ 1.144213] scsi5 : ahci |
| 512 | [ 1.144337] scsi6 : ahci |
| 513 | [ 1.144462] scsi7 : ahci |
| 514 | [ 1.144527] ata1: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288100 irq 19 |
| 515 | [ 1.144530] ata2: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288180 irq 19 |
| 516 | [ 1.144533] ata3: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288200 irq 19 |
| 517 | [ 1.144536] ata4: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288280 irq 19 |
| 518 | [ 1.144539] ata5: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288300 irq 19 |
| 519 | [ 1.144541] ata6: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288380 irq 19 |
| 520 | [ 1.144543] ata7: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288400 irq 19 |
| 521 | [ 1.144545] ata8: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288480 irq 19 |
| 522 | [ 1.144673] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| 523 | [ 1.144679] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 |
| 524 | [ 1.144712] ohci-pci 0000:00:12.0: irq 18, io mem 0xf3284000 |
| 525 | [ 1.200997] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| 526 | [ 1.201001] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 527 | [ 1.201003] usb usb4: Product: OHCI PCI host controller |
| 528 | [ 1.201004] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| 529 | [ 1.201005] usb usb4: SerialNumber: 0000:00:12.0 |
| 530 | [ 1.201173] hub 4-0:1.0: USB hub found |
| 531 | [ 1.201180] hub 4-0:1.0: 5 ports detected |
| 532 | [ 1.201440] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| 533 | [ 1.201446] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 |
| 534 | [ 1.201470] ohci-pci 0000:00:13.0: irq 18, io mem 0xf3285000 |
| 535 | [ 1.260940] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| 536 | [ 1.260944] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 537 | [ 1.260945] usb usb5: Product: OHCI PCI host controller |
| 538 | [ 1.260947] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| 539 | [ 1.260948] usb usb5: SerialNumber: 0000:00:13.0 |
| 540 | [ 1.261122] hub 5-0:1.0: USB hub found |
| 541 | [ 1.261130] hub 5-0:1.0: 5 ports detected |
| 542 | [ 1.261391] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| 543 | [ 1.261396] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 |
| 544 | [ 1.261421] ohci-pci 0000:00:14.5: irq 18, io mem 0xf3286000 |
| 545 | [ 1.320882] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 |
| 546 | [ 1.320886] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 547 | [ 1.320888] usb usb6: Product: OHCI PCI host controller |
| 548 | [ 1.320889] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| 549 | [ 1.320890] usb usb6: SerialNumber: 0000:00:14.5 |
| 550 | [ 1.321053] hub 6-0:1.0: USB hub found |
| 551 | [ 1.321061] hub 6-0:1.0: 2 ports detected |
| 552 | [ 1.321284] ohci-pci 0000:00:16.0: OHCI PCI host controller |
| 553 | [ 1.321289] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 |
| 554 | [ 1.321315] ohci-pci 0000:00:16.0: irq 18, io mem 0xf3287000 |
| 555 | [ 1.380830] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 |
| 556 | [ 1.380833] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 557 | [ 1.380835] usb usb7: Product: OHCI PCI host controller |
| 558 | [ 1.380837] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| 559 | [ 1.380838] usb usb7: SerialNumber: 0000:00:16.0 |
| 560 | [ 1.381003] hub 7-0:1.0: USB hub found |
| 561 | [ 1.381010] hub 7-0:1.0: 4 ports detected |
| 562 | [ 1.460736] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 563 | [ 1.460763] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 564 | [ 1.460789] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 565 | [ 1.460816] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 566 | [ 1.460838] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| 567 | [ 1.460859] ata7: SATA link down (SStatus 0 SControl 300) |
| 568 | [ 1.460884] ata5: SATA link down (SStatus 0 SControl 300) |
| 569 | [ 1.461910] ata4.00: ATA-8: WDC WD10JPVT-22A1YT0, 01.01A01, max UDMA/133 |
| 570 | [ 1.461914] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| 571 | [ 1.461925] ata6.00: ATA-8: WDC WD10JPVT-22A1YT0, 01.01A01, max UDMA/133 |
| 572 | [ 1.461928] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| 573 | [ 1.461937] ata3.00: ATA-8: WDC WD10JPVT-22A1YT0, 01.01A01, max UDMA/133 |
| 574 | [ 1.461939] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| 575 | [ 1.462687] ata2.00: ATAPI: PIONEER DVD-RW DVR-218L, 1.02, max UDMA/100 |
| 576 | [ 1.463031] ata4.00: configured for UDMA/133 |
| 577 | [ 1.463043] ata6.00: configured for UDMA/133 |
| 578 | [ 1.463053] ata3.00: configured for UDMA/133 |
| 579 | [ 1.463342] ata2.00: configured for UDMA/100 |
| 580 | [ 1.464719] ata8: SATA link down (SStatus 0 SControl 300) |
| 581 | [ 1.472955] ata1.00: ATA-8: OCZ-VERTEX3, 2.25, max UDMA/133 |
| 582 | [ 1.472958] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| 583 | [ 1.482845] ata1.00: configured for UDMA/133 |
| 584 | [ 1.483109] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.25 PQ: 0 ANSI: 5 |
| 585 | [ 1.485833] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-218L 1.02 PQ: 0 ANSI: 5 |
| 586 | [ 1.494933] scsi 2:0:0:0: Direct-Access ATA WDC WD10JPVT-22A 1A01 PQ: 0 ANSI: 5 |
| 587 | [ 1.495106] scsi 3:0:0:0: Direct-Access ATA WDC WD10JPVT-22A 1A01 PQ: 0 ANSI: 5 |
| 588 | [ 1.495279] scsi 5:0:0:0: Direct-Access ATA WDC WD10JPVT-22A 1A01 PQ: 0 ANSI: 5 |
| 589 | [ 1.498674] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) |
| 590 | [ 1.498791] sd 0:0:0:0: [sda] Write Protect is off |
| 591 | [ 1.498795] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 592 | [ 1.498828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 593 | [ 1.499243] sda: sda1 |
| 594 | [ 1.499526] sd 0:0:0:0: [sda] Attached SCSI disk |
| 595 | [ 1.510708] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray |
| 596 | [ 1.510712] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| 597 | [ 1.510942] sr 1:0:0:0: Attached scsi CD-ROM sr0 |
| 598 | [ 1.511214] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) |
| 599 | [ 1.511218] sd 2:0:0:0: [sdb] 4096-byte physical blocks |
| 600 | [ 1.511221] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) |
| 601 | [ 1.511223] sd 5:0:0:0: [sdd] 4096-byte physical blocks |
| 602 | [ 1.511232] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) |
| 603 | [ 1.511233] sd 3:0:0:0: [sdc] 4096-byte physical blocks |
| 604 | [ 1.511264] sd 2:0:0:0: [sdb] Write Protect is off |
| 605 | [ 1.511266] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| 606 | [ 1.511280] sd 5:0:0:0: [sdd] Write Protect is off |
| 607 | [ 1.511283] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 |
| 608 | [ 1.511285] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 609 | [ 1.511298] sd 3:0:0:0: [sdc] Write Protect is off |
| 610 | [ 1.511300] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| 611 | [ 1.511314] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 612 | [ 1.511383] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 613 | [ 1.511654] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 614 | [ 1.511708] sr 1:0:0:0: Attached scsi generic sg1 type 5 |
| 615 | [ 1.511817] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| 616 | [ 1.511862] sd 3:0:0:0: Attached scsi generic sg3 type 0 |
| 617 | [ 1.511906] sd 5:0:0:0: Attached scsi generic sg4 type 0 |
| 618 | [ 1.555291] sdc: sdc1 |
| 619 | [ 1.555548] sd 3:0:0:0: [sdc] Attached SCSI disk |
| 620 | [ 1.557559] sdd: sdd1 |
| 621 | [ 1.557791] sd 5:0:0:0: [sdd] Attached SCSI disk |
| 622 | [ 1.561056] sdb: sdb1 |
| 623 | [ 1.561372] sd 2:0:0:0: [sdb] Attached SCSI disk |
| 624 | [ 1.804381] tsc: Refined TSC clocksource calibration: 3693.280 MHz |
| 625 | [ 1.948291] usb 2-4: new high-speed USB device number 2 using ehci-pci |
| 626 | [ 2.028687] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| 627 | [ 2.081014] usb 2-4: New USB device found, idVendor=0781, idProduct=5530 |
| 628 | [ 2.081018] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 629 | [ 2.081019] usb 2-4: Product: Cruzer |
| 630 | [ 2.081021] usb 2-4: Manufacturer: SanDisk |
| 631 | [ 2.081022] usb 2-4: SerialNumber: 20053045400CB8F07F6E |
| 632 | [ 2.082441] usb-storage 2-4:1.0: USB Mass Storage device detected |
| 633 | [ 2.082630] scsi8 : usb-storage 2-4:1.0 |
| 634 | [ 2.082710] usbcore: registered new interface driver usb-storage |
| 635 | [ 2.182181] random: nonblocking pool is initialized |
| 636 | [ 2.471765] usb 4-3: new full-speed USB device number 2 using ohci-pci |
| 637 | [ 2.644736] usb 4-3: New USB device found, idVendor=03f0, idProduct=a407 |
| 638 | [ 2.644739] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 639 | [ 2.644741] usb 4-3: Product: HP Link-5 micro dongle |
| 640 | [ 2.644743] usb 4-3: Manufacturer: HP |
| 641 | [ 2.647942] hidraw: raw HID events driver (C) Jiri Kosina |
| 642 | [ 2.657036] usbcore: registered new interface driver usbhid |
| 643 | [ 2.657039] usbhid: USB HID core driver |
| 644 | [ 2.657784] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/0003:03F0:A407.0001/input/input1 |
| 645 | [ 2.657844] hid-generic 0003:03F0:A407.0001: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:12.0-3/input0 |
| 646 | [ 2.658196] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/0003:03F0:A407.0002/input/input2 |
| 647 | [ 2.658316] hid-generic 0003:03F0:A407.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:12.0-3/input1 |
| 648 | [ 2.803546] Switched to clocksource tsc |
| 649 | [ 2.907353] usb 4-4: new full-speed USB device number 3 using ohci-pci |
| 650 | [ 3.068335] usb 4-4: New USB device found, idVendor=0557, idProduct=8021 |
| 651 | [ 3.068338] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 652 | [ 3.070376] hub 4-4:1.0: USB hub found |
| 653 | [ 3.072326] hub 4-4:1.0: 4 ports detected |
| 654 | [ 3.079954] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.02 PQ: 0 ANSI: 2 |
| 655 | [ 3.080266] sd 8:0:0:0: Attached scsi generic sg5 type 0 |
| 656 | [ 3.081638] sd 8:0:0:0: [sde] 7813120 512-byte logical blocks: (4.00 GB/3.72 GiB) |
| 657 | [ 3.082592] sd 8:0:0:0: [sde] Write Protect is off |
| 658 | [ 3.082595] sd 8:0:0:0: [sde] Mode Sense: 03 00 00 00 |
| 659 | [ 3.083640] sd 8:0:0:0: [sde] No Caching mode page found |
| 660 | [ 3.083694] sd 8:0:0:0: [sde] Assuming drive cache: write through |
| 661 | [ 3.088383] sde: sde1 |
| 662 | [ 3.091945] sd 8:0:0:0: [sde] Attached SCSI removable disk |
| 663 | [ 3.317131] ISO 9660 Extensions: Microsoft Joliet Level 3 |
| 664 | [ 3.319710] ISO 9660 Extensions: RRIP_1991A |
| 665 | [ 3.326702] aufs: module is from the staging directory, the quality is unknown, you have been warned. |
| 666 | [ 3.327521] aufs 3.16-20140908+setfl |
| 667 | [ 3.335708] loop: module loaded |
| 668 | [ 3.347735] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| 669 | [ 3.362913] usb 4-4.1: new full-speed USB device number 4 using ohci-pci |
| 670 | [ 3.484849] usb 4-4.1: New USB device found, idVendor=046d, idProduct=c326 |
| 671 | [ 3.484853] usb 4-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 672 | [ 3.484855] usb 4-4.1: Product: USB Keyboard |
| 673 | [ 3.484857] usb 4-4.1: Manufacturer: Logitech |
| 674 | [ 3.503214] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4.1/4-4.1:1.0/0003:046D:C326.0003/input/input3 |
| 675 | [ 3.504789] hid-generic 0003:046D:C326.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-4.1/input0 |
| 676 | [ 3.538897] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4.1/4-4.1:1.1/0003:046D:C326.0004/input/input4 |
| 677 | [ 3.539022] hid-generic 0003:046D:C326.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-4.1/input1 |
| 678 | [ 4.043121] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| 679 | [ 4.043271] systemd[1]: Detected architecture 'x86-64'. |
| 680 | [ 4.099964] systemd[1]: Inserted module 'autofs4' |
| 681 | [ 4.102979] systemd[1]: Set hostname to <localhost.localdomain>. |
| 682 | [ 4.103171] systemd[1]: Initializing machine ID from random generator. |
| 683 | [ 4.197922] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| 684 | [ 4.198213] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| 685 | [ 4.198267] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 686 | [ 4.198275] systemd[1]: Starting Remote File Systems (Pre). |
| 687 | [ 4.198299] systemd[1]: Reached target Remote File Systems (Pre). |
| 688 | [ 4.198312] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 689 | [ 4.198343] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 690 | [ 4.198350] systemd[1]: Starting Paths. |
| 691 | [ 4.198357] systemd[1]: Reached target Paths. |
| 692 | [ 4.198382] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| 693 | [ 4.198455] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 694 | [ 4.198464] systemd[1]: Starting Encrypted Volumes. |
| 695 | [ 4.198471] systemd[1]: Reached target Encrypted Volumes. |
| 696 | [ 4.198477] systemd[1]: Starting Swap. |
| 697 | [ 4.198485] systemd[1]: Reached target Swap. |
| 698 | [ 4.198491] systemd[1]: Starting Root Slice. |
| 699 | [ 4.198512] systemd[1]: Created slice Root Slice. |
| 700 | [ 4.198518] systemd[1]: Starting User and Session Slice. |
| 701 | [ 4.198550] systemd[1]: Created slice User and Session Slice. |
| 702 | [ 4.198556] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| 703 | [ 4.198588] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 704 | [ 4.198595] systemd[1]: Starting Delayed Shutdown Socket. |
| 705 | [ 4.198614] systemd[1]: Listening on Delayed Shutdown Socket. |
| 706 | [ 4.198621] systemd[1]: Starting Journal Socket (/dev/log). |
| 707 | [ 4.198649] systemd[1]: Listening on Journal Socket (/dev/log). |
| 708 | [ 4.198659] systemd[1]: Starting udev Control Socket. |
| 709 | [ 4.198677] systemd[1]: Listening on udev Control Socket. |
| 710 | [ 4.198686] systemd[1]: Starting udev Kernel Socket. |
| 711 | [ 4.198701] systemd[1]: Listening on udev Kernel Socket. |
| 712 | [ 4.198709] systemd[1]: Starting Journal Socket. |
| 713 | [ 4.198734] systemd[1]: Listening on Journal Socket. |
| 714 | [ 4.198745] systemd[1]: Starting System Slice. |
| 715 | [ 4.198771] systemd[1]: Created slice System Slice. |
| 716 | [ 4.198779] systemd[1]: Starting system-getty.slice. |
| 717 | [ 4.198815] systemd[1]: Created slice system-getty.slice. |
| 718 | [ 4.198833] systemd[1]: Starting Increase datagram queue length... |
| 719 | [ 4.199219] systemd[1]: Mounting Huge Pages File System... |
| 720 | [ 4.199556] systemd[1]: Mounting POSIX Message Queue File System... |
| 721 | [ 4.200026] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 722 | [ 4.200456] systemd[1]: Mounting Debug File System... |
| 723 | [ 4.203722] systemd[1]: Started Set Up Additional Binary Formats. |
| 724 | [ 4.203769] systemd[1]: Starting live-config contains the components that configure a live system during the boot process (late userspace).... |
| 725 | [ 4.234426] systemd[1]: Starting Load Kernel Modules... |
| 726 | [ 4.234877] systemd[1]: Starting udev Coldplug all Devices... |
| 727 | [ 4.235266] systemd[1]: Starting Slices. |
| 728 | [ 4.235279] systemd[1]: Reached target Slices. |
| 729 | [ 4.236223] systemd[1]: Started Increase datagram queue length. |
| 730 | [ 4.238537] systemd[1]: Starting Syslog Socket. |
| 731 | [ 4.238569] systemd[1]: Listening on Syslog Socket. |
| 732 | [ 4.238582] systemd[1]: Starting Journal Service... |
| 733 | [ 4.239006] systemd[1]: Started Journal Service. |
| 734 | [ 8.089064] systemd-udevd[755]: starting version 215 |
| 735 | [ 8.312636] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 736 | [ 8.363934] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 |
| 737 | [ 8.363939] ACPI: Power Button [PWRB] |
| 738 | [ 8.363994] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| 739 | [ 8.363996] ACPI: Power Button [PWRF] |
| 740 | [ 8.391270] systemd-journald[493]: Received request to flush runtime journal from PID 1 |
| 741 | [ 8.397914] ACPI: acpi_idle registered with cpuidle |
| 742 | [ 8.418576] acpi-cpufreq: overriding BIOS provided _PSD data |
| 743 | [ 8.441003] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| 744 | [ 8.441042] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| 745 | [ 8.488287] input: PC Speaker as /devices/platform/pcspkr/input/input7 |
| 746 | [ 8.607330] AVX version of gcm_enc/dec engaged. |
| 747 | [ 8.616820] [drm] Initialized drm 1.1.0 20060810 |
| 748 | [ 8.623343] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) |
| 749 | [ 8.626677] snd_hda_intel 0000:01:00.1: Disabling MSI |
| 750 | [ 8.626687] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client |
| 751 | [ 8.636902] alg: No test for crc32 (crc32-pclmul) |
| 752 | [ 8.681634] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line |
| 753 | [ 8.681642] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 754 | [ 8.681645] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| 755 | [ 8.681647] sound hdaudioC0D0: mono: mono_out=0x0 |
| 756 | [ 8.681648] sound hdaudioC0D0: dig-out=0x11/0x1e |
| 757 | [ 8.681650] sound hdaudioC0D0: inputs: |
| 758 | [ 8.681652] sound hdaudioC0D0: Front Mic=0x19 |
| 759 | [ 8.681655] sound hdaudioC0D0: Rear Mic=0x18 |
| 760 | [ 8.681656] sound hdaudioC0D0: Line=0x1a |
| 761 | [ 8.683574] wmi: Mapper loaded |
| 762 | [ 8.696219] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D0/input8 |
| 763 | [ 8.700429] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 |
| 764 | [ 8.700677] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 |
| 765 | [ 8.701282] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 |
| 766 | [ 8.701553] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 |
| 767 | [ 8.701808] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 |
| 768 | [ 8.702074] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 |
| 769 | [ 8.703175] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 |
| 770 | [ 8.703455] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 |
| 771 | [ 8.710346] kvm: Nested Virtualization enabled |
| 772 | [ 8.710350] kvm: Nested Paging enabled |
| 773 | [ 8.752009] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x117000a2 |
| 774 | [ 8.752012] nouveau [ DEVICE][0000:01:00.0] Chipset: GM107 (NV117) |
| 775 | [ 8.752014] nouveau [ DEVICE][0000:01:00.0] Family : NV110 |
| 776 | [ 8.752035] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... |
| 777 | [ 8.752043] nouveau [ VBIOS][0000:01:00.0] ... signature not found |
| 778 | [ 8.752044] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... |
| 779 | [ 8.792668] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid |
| 780 | [ 8.792670] nouveau [ VBIOS][0000:01:00.0] using image from PROM |
| 781 | [ 8.792774] nouveau [ VBIOS][0000:01:00.0] BIT signature found |
| 782 | [ 8.792777] nouveau [ VBIOS][0000:01:00.0] version 82.07.32.40.47 |
| 783 | [ 8.793134] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X |
| 784 | [ 8.793143] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled |
| 785 | [ 8.793172] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5 |
| 786 | [ 8.793173] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB |
| 787 | [ 8.793175] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags |
| 788 | [ 8.794135] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz |
| 789 | [ 8.794370] nouveau [ CLK][0000:01:00.0] 0f: core 270-1398 MHz memory 5400 MHz |
| 790 | [ 8.794448] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz |
| 791 | [ 8.799898] nouveau [ PGRAPH][0000:01:00.0] using external firmware |
| 792 | [ 8.799947] nouveau 0000:01:00.0: firmware: failed to load nouveau/nv117_fuc409c (-2) |
| 793 | [ 8.800002] nouveau 0000:01:00.0: Direct firmware load failed with error -2 |
| 794 | [ 8.800004] nouveau 0000:01:00.0: Falling back to user helper |
| 795 | [ 8.800726] nouveau 0000:01:00.0: firmware: failed to load nouveau/fuc409c (-2) |
| 796 | [ 8.800788] nouveau 0000:01:00.0: Direct firmware load failed with error -2 |
| 797 | [ 8.800791] nouveau 0000:01:00.0: Falling back to user helper |
| 798 | [ 8.801268] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x18000717, -22 |
| 799 | [ 8.801333] nouveau E[ DRM] failed to create 0x80000080, -22 |
| 800 | [ 8.802623] nouveau: probe of 0000:01:00.0 failed with error -22 |
| 801 | [ 8.884128] r8169 0000:04:00.0: firmware: failed to load rtl_nic/rtl8168f-1.fw (-2) |
| 802 | [ 8.884191] r8169 0000:04:00.0: Direct firmware load failed with error -2 |
| 803 | [ 8.884194] r8169 0000:04:00.0: Falling back to user helper |
| 804 | [ 8.884794] r8169 0000:04:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168f-1.fw (-12) |
| 805 | [ 8.896639] r8169 0000:04:00.0 eth0: link down |
| 806 | [ 8.896659] r8169 0000:04:00.0 eth0: link down |
| 807 | [ 8.896701] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 808 | [ 9.079455] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17 |
| 809 | [ 9.079711] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 |
| 810 | [ 9.080022] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19 |
| 811 | [ 9.357176] RPC: Registered named UNIX socket transport module. |
| 812 | [ 9.357179] RPC: Registered udp transport module. |
| 813 | [ 9.357180] RPC: Registered tcp transport module. |
| 814 | [ 9.357181] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 815 | [ 9.369527] FS-Cache: Loaded |
| 816 | [ 9.390070] FS-Cache: Netfs 'nfs' registered for caching |
| 817 | [ 9.438243] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| 818 | [ 11.331313] r8169 0000:04:00.0 eth0: link up |
| 819 | [ 11.331328] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |