Gitiles
Code Review Sign In
review.coreboot.org / board-status / 1a875c203f3076480d3b2772a69f1642d5725865 / . / jetway / nf81-t56n-lf / 4.0-5626-g7274800-dirty / 2014-03-05T06:59:02Z / kernel_log.txt
blob: 46b3ecffb0786e76b78f5a32952e95216c0e1fcb [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
5[ 0.000000] Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201403 initrd=boot/x86_64/archiso.img
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7fddfff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000c7fde000-0x00000000dfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
14[ 0.000000] NX (Execute Disable) protection: active
15[ 0.000000] SMBIOS 2.7 present.
16[ 0.000000] DMI: Jetway NF81-T56N-LF, BIOS ap-jupiter-alpha 03/05/2014
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges enabled:
23[ 0.000000] 00000-9FFFF write-back
24[ 0.000000] A0000-BFFFF uncachable
25[ 0.000000] C0000-FFFFF write-back
26[ 0.000000] MTRR variable ranges enabled:
27[ 0.000000] 0 base 000000000 mask F80000000 write-back
28[ 0.000000] 1 base 080000000 mask FC0000000 write-back
29[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
30[ 0.000000] 3 disabled
31[ 0.000000] 4 disabled
32[ 0.000000] 5 disabled
33[ 0.000000] 6 base 0FFE00000 mask FFFE00000 write-protect
34[ 0.000000] 7 disabled
35[ 0.000000] TOM2: 000000011f000000 aka 4592M
36[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
37[ 0.000000] e820: last_pfn = 0xc7fde max_arch_pfn = 0x400000000
38[ 0.000000] found SMP MP-table at [mem 0x000f0e20-0x000f0e2f] mapped at [ffff8800000f0e20]
39[ 0.000000] Scanning 1 areas for low memory corruption
40[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
41[ 0.000000] Using GB pages for direct mapping
42[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
43[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
44[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
45[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
46[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
48[ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M
49[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff]
51[ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
53[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
54[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7fddfff]
55[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
56[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
57[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
58[ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M
59[ 0.000000] [mem 0xc7e00000-0xc7fddfff] page 4k
60[ 0.000000] RAMDISK: [mem 0x7ed0f000-0x7fffffff]
61[ 0.000000] ACPI: RSDP 00000000000f0e00 000014 (v00 CORE )
62[ 0.000000] ACPI: RSDT 00000000c7fe2424 000040 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: FACP 00000000c7fe4d90 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: DSDT 00000000c7fe24c8 002886 (v02 AMD COREBOOT 00010001 INTL 20140114)
65[ 0.000000] ACPI: FACS 00000000c7fe4d50 000040
66[ 0.000000] ACPI: HPET 00000000c7fe4e88 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: APIC 00000000c7fe4ec0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: HEST 00000000c7fe4f20 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: SSDT 00000000c7fe50c0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
70[ 0.000000] ACPI: SSDT 00000000c7fe6750 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
71[ 0.000000] ACPI: SSDT 00000000c7fe6b30 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] No NUMA configuration found
74[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
75[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
76[ 0.000000] NODE_DATA [mem 0x11eff9000-0x11effdfff]
77[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
78[ 0.000000] Zone ranges:
79[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
80[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
81[ 0.000000] Normal [mem 0x100000000-0x11effffff]
82[ 0.000000] Movable zone start for each node
83[ 0.000000] Early memory node ranges
84[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
85[ 0.000000] node 0: [mem 0x00100000-0xc7fddfff]
86[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
87[ 0.000000] On node 0 totalpages: 946044
88[ 0.000000] DMA zone: 64 pages used for memmap
89[ 0.000000] DMA zone: 21 pages reserved
90[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
91[ 0.000000] DMA32 zone: 12736 pages used for memmap
92[ 0.000000] DMA32 zone: 815070 pages, LIFO batch:31
93[ 0.000000] Normal zone: 1984 pages used for memmap
94[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
95[ 0.000000] ACPI: PM-Timer IO Port: 0x808
96[ 0.000000] ACPI: Local APIC address 0xfee00000
97[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
98[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
99[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
100[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
101[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
102[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
103[ 0.000000] ACPI: IRQ0 used by override.
104[ 0.000000] ACPI: IRQ2 used by override.
105[ 0.000000] ACPI: IRQ9 used by override.
106[ 0.000000] Using ACPI (MADT) for SMP configuration information
107[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
108[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
109[ 0.000000] nr_irqs_gsi: 40
110[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
111[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
112[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
113[ 0.000000] PM: Registered nosave memory: [mem 0xc7fde000-0xdfffffff]
114[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
115[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff]
116[ 0.000000] PM: Registered nosave memory: [mem 0xf9000000-0xffffffff]
117[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
118[ 0.000000] Booting paravirtualized kernel on bare hardware
119[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
120[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86336 r8192 d24256 u1048576
121[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
122[ 0.000000] pcpu-alloc: [0] 0 1
123[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 931239
124[ 0.000000] Policy zone: Normal
125[ 0.000000] Kernel command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201403 initrd=boot/x86_64/archiso.img
126[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
127[ 0.000000] Checking aperture...
128[ 0.000000] No AGP bridge found
129[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
130[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
131[ 0.000000] Memory: 3627204K/3784176K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 156972K reserved)
132[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
133[ 0.000000] Preemptible hierarchical RCU implementation.
134[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
135[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
136[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
137[ 0.000000] NR_IRQS:8448 nr_irqs:512 16
138[ 0.000000] Console: colour VGA+ 80x25
139[ 0.000000] console [tty0] enabled
140[ 0.000000] allocated 15204352 bytes of page_cgroup
141[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
142[ 0.000000] hpet clockevent registered
143[ 0.000000] tsc: Fast TSC calibration using PIT
144[ 0.003333] tsc: Detected 1650.052 MHz processor
145[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3301.60 BogoMIPS (lpj=5500173)
146[ 0.000012] pid_max: default: 32768 minimum: 301
147[ 0.000070] Security Framework initialized
148[ 0.000093] AppArmor: AppArmor disabled by boot time parameter
149[ 0.000096] Yama: becoming mindful.
150[ 0.000647] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
151[ 0.003440] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
152[ 0.004705] Mount-cache hash table entries: 256
153[ 0.005134] Initializing cgroup subsys memory
154[ 0.005154] Initializing cgroup subsys devices
155[ 0.005158] Initializing cgroup subsys freezer
156[ 0.005161] Initializing cgroup subsys net_cls
157[ 0.005165] Initializing cgroup subsys blkio
158[ 0.005211] tseg: 0000000000
159[ 0.005223] CPU: Physical Processor ID: 0
160[ 0.005226] CPU: Processor Core ID: 0
161[ 0.005230] mce: CPU supports 6 MCE banks
162[ 0.005248] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
163Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
164tlb_flushall_shift: 5
165[ 0.005418] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
166[ 0.007749] ACPI: Core revision 20131115
167[ 0.011843] ACPI: All ACPI Tables successfully acquired
168[ 0.011857] ftrace: allocating 21057 entries in 83 pages
169[ 0.032994] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
170[ 0.066031] smpboot: CPU0: AMD G-T56N Processor (fam: 14, model: 02, stepping: 00)
171[ 0.169520] Performance Events: AMD PMU driver.
172[ 0.169530] ... version: 0
173[ 0.169533] ... bit width: 48
174[ 0.169535] ... generic registers: 4
175[ 0.169538] ... value mask: 0000ffffffffffff
176[ 0.169540] ... max period: 00007fffffffffff
177[ 0.169543] ... fixed-purpose events: 0
178[ 0.169545] ... event mask: 000000000000000f
179[ 0.186519] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
180[ 0.193271] x86: Booting SMP configuration:
181[ 0.193280] .... node #0, CPUs: #1
182[ 0.206526] x86: Booted up 1 node, 2 CPUs
183[ 0.206531] smpboot: Total of 2 processors activated (6602.21 BogoMIPS)
184[ 0.207302] devtmpfs: initialized
185[ 0.216811] RTC time: 23:28:14, date: 02/02/12
186[ 0.216919] NET: Registered protocol family 16
187[ 0.217166] cpuidle: using governor ladder
188[ 0.217169] cpuidle: using governor menu
189[ 0.217344] ACPI: bus type PCI registered
190[ 0.217348] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
191[ 0.217475] PCI: Using configuration type 1 for base access
192[ 0.217478] PCI: Using configuration type 1 for extended access
193[ 0.218755] bio: create slab <bio-0> at 0
194[ 0.219020] ACPI: Added _OSI(Module Device)
195[ 0.219024] ACPI: Added _OSI(Processor Device)
196[ 0.219028] ACPI: Added _OSI(3.0 _SCP Extensions)
197[ 0.219031] ACPI: Added _OSI(Processor Aggregator Device)
198[ 0.221359] ACPI: Executed 2 blocks of module-level executable AML code
199[ 0.225027] ACPI: Interpreter enabled
200[ 0.225046] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
201[ 0.225072] ACPI: (supports S0 S1 S3 S4 S5)
202[ 0.225075] ACPI: Using IOAPIC for interrupt routing
203[ 0.225107] HEST: Table parsing has been initialized.
204[ 0.225114] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
205[ 0.225266] ACPI: No dock devices found.
206[ 0.240951] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
207[ 0.240966] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
208[ 0.241106] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
209[ 0.241653] PCI host bridge to bus 0000:00
210[ 0.241660] pci_bus 0000:00: root bus resource [bus 00-ff]
211[ 0.241665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
212[ 0.241670] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
213[ 0.241674] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
214[ 0.241678] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
215[ 0.241693] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
216[ 0.241871] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
217[ 0.241887] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
218[ 0.241898] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
219[ 0.241908] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
220[ 0.241971] pci 0000:00:01.0: supports D1 D2
221[ 0.242057] pci 0000:00:01.0: System wakeup disabled by ACPI
222[ 0.242146] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400
223[ 0.242226] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
224[ 0.242317] pci 0000:00:06.0: System wakeup disabled by ACPI
225[ 0.242418] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
226[ 0.242445] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
227[ 0.242459] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
228[ 0.242474] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
229[ 0.242488] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
230[ 0.242502] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
231[ 0.242516] pci 0000:00:11.0: reg 0x24: [mem 0xf0148000-0xf01483ff]
232[ 0.242720] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
233[ 0.242741] pci 0000:00:12.0: reg 0x10: [mem 0xf0144000-0xf0144fff]
234[ 0.242892] pci 0000:00:12.0: System wakeup disabled by ACPI
235[ 0.242991] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
236[ 0.243018] pci 0000:00:12.2: reg 0x10: [mem 0xf0148400-0xf01484ff]
237[ 0.243128] pci 0000:00:12.2: supports D1 D2
238[ 0.243132] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
239[ 0.243219] pci 0000:00:12.2: System wakeup disabled by ACPI
240[ 0.243299] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
241[ 0.243319] pci 0000:00:13.0: reg 0x10: [mem 0xf0145000-0xf0145fff]
242[ 0.243469] pci 0000:00:13.0: System wakeup disabled by ACPI
243[ 0.243556] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
244[ 0.243583] pci 0000:00:13.2: reg 0x10: [mem 0xf0148500-0xf01485ff]
245[ 0.243693] pci 0000:00:13.2: supports D1 D2
246[ 0.243697] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
247[ 0.243785] pci 0000:00:13.2: System wakeup disabled by ACPI
248[ 0.243869] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
249[ 0.244093] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
250[ 0.244110] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
251[ 0.244122] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
252[ 0.244133] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
253[ 0.244144] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
254[ 0.244155] pci 0000:00:14.1: reg 0x20: [io 0x0000-0x000f]
255[ 0.244325] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
256[ 0.244355] pci 0000:00:14.2: reg 0x10: [mem 0xf0140000-0xf0143fff 64bit]
257[ 0.244444] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
258[ 0.244600] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
259[ 0.244825] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
260[ 0.244951] pci 0000:00:14.4: System wakeup disabled by ACPI
261[ 0.245013] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
262[ 0.245033] pci 0000:00:14.5: reg 0x10: [mem 0xf0146000-0xf0146fff]
263[ 0.245188] pci 0000:00:14.5: System wakeup disabled by ACPI
264[ 0.245274] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
265[ 0.245294] pci 0000:00:16.0: reg 0x10: [mem 0xf0147000-0xf0147fff]
266[ 0.245445] pci 0000:00:16.0: System wakeup disabled by ACPI
267[ 0.245517] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
268[ 0.245544] pci 0000:00:16.2: reg 0x10: [mem 0xf0148600-0xf01486ff]
269[ 0.245653] pci 0000:00:16.2: supports D1 D2
270[ 0.245657] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
271[ 0.245745] pci 0000:00:16.2: System wakeup disabled by ACPI
272[ 0.245845] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
273[ 0.245999] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
274[ 0.246147] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
275[ 0.246309] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
276[ 0.246470] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
277[ 0.246617] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
278[ 0.246766] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
279[ 0.246912] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
280[ 0.247161] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
281[ 0.247182] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
282[ 0.247213] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
283[ 0.247234] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
284[ 0.247314] pci 0000:01:00.0: supports D1 D2
285[ 0.247318] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.253138] pci 0000:00:06.0: PCI bridge to [bus 01]
287[ 0.253163] pci 0000:00:06.0: bridge window [io 0x1000-0x1fff]
288[ 0.253182] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
289[ 0.253365] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
290[ 0.253380] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
291[ 0.253384] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
292[ 0.253389] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
293[ 0.253393] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
294[ 0.253915] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
295[ 0.254023] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
296[ 0.254122] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
297[ 0.254219] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
298[ 0.254316] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
299[ 0.254412] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
300[ 0.254503] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
301[ 0.254598] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
302[ 0.254892] ACPI: Enabled 6 GPEs in block 00 to 1F
303[ 0.254906] ACPI: \_SB_.PCI0: notify handler is installed
304[ 0.254957] Found 1 acpi root devices
305[ 0.255314] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
306[ 0.255331] vgaarb: loaded
307[ 0.255334] vgaarb: bridge control possible 0000:00:01.0
308[ 0.255433] PCI: Using ACPI for IRQ routing
309[ 0.255440] PCI: pci_cache_line_size set to 64 bytes
310[ 0.255544] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
311[ 0.255549] e820: reserve RAM buffer [mem 0xc7fde000-0xc7ffffff]
312[ 0.255552] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
313[ 0.255739] NetLabel: Initializing
314[ 0.255743] NetLabel: domain hash size = 128
315[ 0.255745] NetLabel: protocols = UNLABELED CIPSOv4
316[ 0.255771] NetLabel: unlabeled traffic allowed by default
317[ 0.255820] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
318[ 0.255829] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
319[ 0.257937] Switched to clocksource hpet
320[ 0.268356] pnp: PnP ACPI init
321[ 0.268389] ACPI: bus type PNP registered
322[ 0.268774] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
323[ 0.268828] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
324[ 0.268852] pnp 00:02: [dma 4]
325[ 0.268894] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
326[ 0.268965] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
327[ 0.269039] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
328[ 0.269106] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
329[ 0.269394] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
330[ 0.269464] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
331[ 0.269468] pnp: PnP ACPI: found 8 devices
332[ 0.269471] ACPI: bus type PNP unregistered
333[ 0.279761] pci 0000:00:14.1: BAR 4: assigned [io 0x2430-0x243f]
334[ 0.279777] pci 0000:00:06.0: PCI bridge to [bus 01]
335[ 0.279783] pci 0000:00:06.0: bridge window [io 0x1000-0x1fff]
336[ 0.279793] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
337[ 0.279802] pci 0000:00:14.4: PCI bridge to [bus 02]
338[ 0.279821] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
339[ 0.279826] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
340[ 0.279830] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
341[ 0.279834] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
342[ 0.279838] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
343[ 0.279842] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
344[ 0.279847] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
345[ 0.279851] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
346[ 0.279855] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
347[ 0.279858] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
348[ 0.279926] NET: Registered protocol family 2
349[ 0.280246] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
350[ 0.280468] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
351[ 0.280747] TCP: Hash tables configured (established 32768 bind 32768)
352[ 0.280839] TCP: reno registered
353[ 0.280861] UDP hash table entries: 2048 (order: 4, 65536 bytes)
354[ 0.280920] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
355[ 0.281113] NET: Registered protocol family 1
356[ 0.281148] pci 0000:00:01.0: Boot video device
357[ 0.283569] PCI: CLS 64 bytes, default 64
358[ 0.283690] Unpacking initramfs...
359[ 4.451032] Freeing initrd memory: 19396K (ffff88007ed0f000 - ffff880080000000)
360[ 4.451046] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
361[ 4.451051] software IO TLB [mem 0xc3fde000-0xc7fde000] (64MB) mapped at [ffff8800c3fde000-ffff8800c7fddfff]
362[ 4.451367] LVT offset 0 assigned for vector 0x400
363[ 4.451447] perf: AMD IBS detected (0x000000ff)
364[ 4.451503] Scanning for low memory corruption every 60 seconds
365[ 4.452247] audit: initializing netlink socket (disabled)
366[ 4.452274] type=2000 audit(1328225298.336:1): initialized
367[ 4.474382] HugeTLB registered 2 MB page size, pre-allocated 0 pages
368[ 4.477246] zbud: loaded
369[ 4.477718] VFS: Disk quotas dquot_6.5.2
370[ 4.477811] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
371[ 4.478293] msgmni has been set to 7122
372[ 4.478448] Key type big_key registered
373[ 4.478998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
374[ 4.479125] io scheduler noop registered
375[ 4.479130] io scheduler deadline registered
376[ 4.479197] io scheduler cfq registered (default)
377[ 4.479312] pcieport 0000:00:06.0: device [1022:1514] has invalid IRQ; check vendor BIOS
378[ 4.479602] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
379[ 4.479751] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
380[ 4.479756] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
381[ 4.479763] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
382[ 4.479788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
383[ 4.479820] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
384[ 4.479988] GHES: Failed to enable APEI firmware first mode.
385[ 4.480260] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
386[ 4.501065] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
387[ 4.502107] Linux agpgart interface v0.103
388[ 4.502237] rtc_cmos 00:00: RTC can wake from S4
389[ 4.502410] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
390[ 4.502452] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
391[ 4.502666] drop_monitor: Initializing network drop monitor service
392[ 4.502755] TCP: cubic registered
393[ 4.502932] NET: Registered protocol family 10
394[ 4.503226] NET: Registered protocol family 17
395[ 4.503246] Key type dns_resolver registered
396[ 4.503752] registered taskstats version 1
397[ 4.504672] Magic number: 0:491:503
398[ 4.504784] rtc_cmos 00:00: setting system clock to 2012-02-02 23:28:19 UTC (1328225299)
399[ 4.504829] PM: Hibernation image not present or could not be loaded.
400[ 4.507158] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
401[ 4.507167] Write protecting the kernel read-only data: 8192k
402[ 4.512125] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
403[ 4.514347] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
404[ 4.537553] systemd-udevd[45]: starting version 208
405[ 4.571222] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
406[ 4.571235] ACPI: Power Button [PWRB]
407[ 4.571327] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
408[ 4.571332] ACPI: Power Button [PWRF]
409[ 4.573406] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
410[ 4.573880] serio: i8042 KBD port at 0x60,0x64 irq 1
411[ 4.573957] serio: i8042 AUX port at 0x60,0x64 irq 12
412[ 4.586832] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
413[ 4.587204] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
414[ 4.587599] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000612000, 00:30:18:a4:38:37, XID 0c200000 IRQ 41
415[ 4.587605] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
416[ 4.589186] [drm] Initialized drm 1.1.0 20060810
417[ 4.592693] SCSI subsystem initialized
418[ 4.602544] ACPI: bus type USB registered
419[ 4.602600] usbcore: registered new interface driver usbfs
420[ 4.602625] usbcore: registered new interface driver hub
421[ 4.603641] libata version 3.00 loaded.
422[ 4.604327] pata_atiixp 0000:00:14.1: enabling device (0000 -> 0001)
423[ 4.605436] usbcore: registered new device driver usb
424[ 4.607131] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
425[ 4.608039] ehci-pci: EHCI PCI platform driver
426[ 4.608267] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
427[ 4.608553] ohci-pci: OHCI PCI platform driver
428[ 4.609442] scsi0 : pata_atiixp
429[ 4.610439] scsi1 : pata_atiixp
430[ 4.610533] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2430 irq 14
431[ 4.610537] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2438 irq 15
432[ 4.610902] QUIRK: Enable AMD PLL fix
433[ 4.610951] ehci-pci 0000:00:12.2: EHCI Host Controller
434[ 4.610965] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
435[ 4.610978] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
436[ 4.610994] ehci-pci 0000:00:12.2: debug port 1
437[ 4.611069] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0148400
438[ 4.620838] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
439[ 4.621222] hub 1-0:1.0: USB hub found
440[ 4.621240] hub 1-0:1.0: 5 ports detected
441[ 4.621872] ehci-pci 0000:00:13.2: EHCI Host Controller
442[ 4.621885] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
443[ 4.621894] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
444[ 4.621911] ehci-pci 0000:00:13.2: debug port 1
445[ 4.621968] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0148500
446[ 4.623565] [drm] radeon kernel modesetting enabled.
447[ 4.630755] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
448[ 4.631138] hub 2-0:1.0: USB hub found
449[ 4.631157] hub 2-0:1.0: 5 ports detected
450[ 4.631701] ehci-pci 0000:00:16.2: EHCI Host Controller
451[ 4.631718] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
452[ 4.631728] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
453[ 4.631745] ehci-pci 0000:00:16.2: debug port 1
454[ 4.631801] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0148600
455[ 4.640755] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
456[ 4.641190] hub 3-0:1.0: USB hub found
457[ 4.641213] hub 3-0:1.0: 4 ports detected
458[ 4.641992] ohci-pci 0000:00:12.0: OHCI PCI host controller
459[ 4.642008] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
460[ 4.642059] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0144000
461[ 4.686550] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
462[ 4.698891] hub 4-0:1.0: USB hub found
463[ 4.698917] hub 4-0:1.0: 5 ports detected
464[ 4.699422] ohci-pci 0000:00:13.0: OHCI PCI host controller
465[ 4.699435] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
466[ 4.699469] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0145000
467[ 4.755593] hub 5-0:1.0: USB hub found
468[ 4.755622] hub 5-0:1.0: 5 ports detected
469[ 4.756130] ohci-pci 0000:00:14.5: OHCI PCI host controller
470[ 4.756143] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
471[ 4.756176] ohci-pci 0000:00:14.5: irq 18, io mem 0xf0146000
472[ 4.812273] hub 6-0:1.0: USB hub found
473[ 4.812298] hub 6-0:1.0: 2 ports detected
474[ 4.812759] ohci-pci 0000:00:16.0: OHCI PCI host controller
475[ 4.812772] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
476[ 4.812805] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0147000
477[ 4.869012] hub 7-0:1.0: USB hub found
478[ 4.869038] hub 7-0:1.0: 4 ports detected
479[ 4.869420] ahci 0000:00:11.0: version 3.0
480[ 4.869782] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
481[ 4.869789] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
482[ 4.871908] scsi2 : ahci
483[ 4.873964] scsi3 : ahci
484[ 4.874272] scsi4 : ahci
485[ 4.874466] scsi5 : ahci
486[ 4.874560] ata3: SATA max UDMA/133 abar m1024@0xf0148000 port 0xf0148100 irq 19
487[ 4.874566] ata4: SATA max UDMA/133 abar m1024@0xf0148000 port 0xf0148180 irq 19
488[ 4.874571] ata5: SATA max UDMA/133 abar m1024@0xf0148000 port 0xf0148200 irq 19
489[ 4.874575] ata6: SATA max UDMA/133 abar m1024@0xf0148000 port 0xf0148280 irq 19
490[ 4.875418] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1002:0x9806).
491[ 4.875462] [drm] register mmio base: 0xF0100000
492[ 4.875465] [drm] register mmio size: 262144
493[ 4.875554] ATOM BIOS: AMD
494[ 4.875642] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
495[ 4.875647] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
496[ 4.875651] [drm] Detected VRAM RAM=384M, BAR=256M
497[ 4.875653] [drm] RAM width 32bits DDR
498[ 4.875765] [TTM] Zone kernel: Available graphics memory: 1824494 kiB
499[ 4.875768] [TTM] Initializing pool allocator
500[ 4.875777] [TTM] Initializing DMA pool allocator
501[ 4.875814] [drm] radeon: 384M of VRAM memory ready
502[ 4.875818] [drm] radeon: 1024M of GTT memory ready.
503[ 4.876291] [drm] GART: num cpu pages 262144, num gpu pages 262144
504[ 4.889432] [drm] Loading PALM Microcode
505[ 4.893623] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
506[ 4.893840] radeon 0000:00:01.0: WB enabled
507[ 4.893848] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88007ee79c00
508[ 4.893853] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88007ee79c0c
509[ 4.894749] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000fb2118
510[ 4.894753] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
511[ 4.894756] [drm] Driver supports precise vblank timestamp query.
512[ 4.894795] radeon 0000:00:01.0: irq 42 for MSI/MSI-X
513[ 4.894820] radeon 0000:00:01.0: radeon: using MSI.
514[ 4.894860] [drm] radeon: irq initialized.
515[ 4.912122] [drm] ring test on 0 succeeded in 1 usecs
516[ 4.912189] [drm] ring test on 3 succeeded in 1 usecs
517[ 4.927693] usb 1-4: new high-speed USB device number 2 using ehci-pci
518[ 4.968322] [drm] ring test on 5 succeeded in 1 usecs
519[ 4.988357] [drm] UVD initialized successfully.
520[ 4.989117] [drm] Enabling audio 0 support
521[ 4.989166] [drm] ib test on ring 0 succeeded in 0 usecs
522[ 4.989199] [drm] ib test on ring 3 succeeded in 0 usecs
523[ 5.009999] [drm] ib test on ring 5 succeeded
524[ 5.030839] [drm] Radeon Display Connectors
525[ 5.030842] [drm] Connector 0:
526[ 5.030845] [drm] DP-1
527[ 5.030847] [drm] HPD2
528[ 5.030851] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
529[ 5.030854] [drm] Encoders:
530[ 5.030856] [drm] DFP1: INTERNAL_UNIPHY
531[ 5.030859] [drm] Connector 1:
532[ 5.030861] [drm] VGA-1
533[ 5.030864] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
534[ 5.030866] [drm] Encoders:
535[ 5.030869] [drm] CRT1: INTERNAL_KLDSCP_DAC1
536[ 5.030917] [drm] Internal thermal controller without fan control
537[ 5.030997] [drm] Found smc ucode version: 0x00010601
538[ 5.031195] [drm] radeon: dpm initialized
539[ 5.057241] usb-storage 1-4:1.0: USB Mass Storage device detected
540[ 5.057387] scsi6 : usb-storage 1-4:1.0
541[ 5.057543] usbcore: registered new interface driver usb-storage
542[ 5.076083] [drm] fb mappable at 0xE0477000
543[ 5.076092] [drm] vram apper at 0xE0000000
544[ 5.076094] [drm] size 8294400
545[ 5.076097] [drm] fb depth is 24
546[ 5.076099] [drm] pitch is 7680
547[ 5.076453] fbcon: radeondrmfb (fb0) is primary device
548[ 5.117562] Console: switching to colour frame buffer device 240x67
549[ 5.130035] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
550[ 5.130040] radeon 0000:00:01.0: registered panic notifier
551[ 5.130072] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
552[ 5.194682] ata3: SATA link down (SStatus 0 SControl 300)
553[ 5.198015] ata6: SATA link down (SStatus 0 SControl 300)
554[ 5.198116] ata4: SATA link down (SStatus 0 SControl 300)
555[ 5.198249] ata5: SATA link down (SStatus 0 SControl 300)
556[ 5.454785] tsc: Refined TSC clocksource calibration: 1650.000 MHz
557[ 6.060636] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Switch 1.26 PQ: 0 ANSI: 6
558[ 6.064652] sd 6:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
559[ 6.066743] sd 6:0:0:0: [sda] Write Protect is off
560[ 6.066754] sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
561[ 6.067900] sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
562[ 6.072776] sda: sda1 sda2
563[ 6.076777] sd 6:0:0:0: [sda] Attached SCSI disk
564[ 6.455781] Switched to clocksource tsc
565[ 6.792972] ISO 9660 Extensions: RRIP_1991A
566[ 6.812705] loop: module loaded
567[ 6.877796] squashfs: version 4.0 (2009/01/31) Phillip Lougher
568[ 6.900757] device-mapper: uevent: version 1.0.3
569[ 6.900927] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
570[ 6.901800] random: dmsetup urandom read with 43 bits of entropy available
571[ 6.909468] bio: create slab <bio-1> at 1
572[ 6.942557] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
573[ 7.607275] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
574[ 7.617821] systemd[1]: Set hostname to <archiso>.
575[ 7.762509] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
576[ 7.762660] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
577[ 7.762740] systemd[1]: Starting Remote File Systems.
578[ 7.762969] systemd[1]: Reached target Remote File Systems.
579[ 7.762991] systemd[1]: Starting Root Slice.
580[ 7.763428] systemd[1]: Created slice Root Slice.
581[ 7.763449] systemd[1]: Starting User and Session Slice.
582[ 7.763733] systemd[1]: Created slice User and Session Slice.
583[ 7.763755] systemd[1]: Starting System Slice.
584[ 7.763988] systemd[1]: Created slice System Slice.
585[ 7.764010] systemd[1]: Starting system-getty.slice.
586[ 7.764286] systemd[1]: Created slice system-getty.slice.
587[ 7.764307] systemd[1]: Starting Slices.
588[ 7.764434] systemd[1]: Reached target Slices.
589[ 7.764455] systemd[1]: Starting Delayed Shutdown Socket.
590[ 7.764661] systemd[1]: Listening on Delayed Shutdown Socket.
591[ 7.764682] systemd[1]: Starting Device-mapper event daemon FIFOs.
592[ 7.764876] systemd[1]: Listening on Device-mapper event daemon FIFOs.
593[ 7.764896] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
594[ 7.765070] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
595[ 7.765146] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
596[ 7.765549] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
597[ 7.765582] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
598[ 7.765660] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
599[ 7.765679] systemd[1]: Starting Paths.
600[ 7.765810] systemd[1]: Reached target Paths.
601[ 7.765831] systemd[1]: Starting LVM2 metadata daemon socket.
602[ 7.766021] systemd[1]: Listening on LVM2 metadata daemon socket.
603[ 7.766078] systemd[1]: Starting udev Kernel Socket.
604[ 7.766243] systemd[1]: Listening on udev Kernel Socket.
605[ 7.766269] systemd[1]: Starting udev Control Socket.
606[ 7.766432] systemd[1]: Listening on udev Control Socket.
607[ 7.766454] systemd[1]: Starting Encrypted Volumes.
608[ 7.766590] systemd[1]: Reached target Encrypted Volumes.
609[ 7.766617] systemd[1]: Starting Journal Socket.
610[ 7.766829] systemd[1]: Listening on Journal Socket.
611[ 7.766871] systemd[1]: Mounting POSIX Message Queue File System...
612[ 7.776603] systemd[1]: Starting Create list of required static device nodes for the current kernel...
613[ 7.790213] systemd[1]: Starting Apply Kernel Variables...
614[ 7.791707] systemd[1]: Starting udev Coldplug all Devices...
615[ 7.818437] systemd[1]: Starting Load Kernel Modules...
616[ 7.883051] systemd[1]: Started Set Up Additional Binary Formats.
617[ 7.883112] systemd[1]: Starting Setup Virtual Console...
618[ 7.884292] systemd[1]: Mounting Huge Pages File System...
619[ 7.885375] systemd[1]: Starting Journal Service...
620[ 7.886928] systemd[1]: Started Journal Service.
621[ 8.113988] systemd-journald[151]: Vacuuming done, freed 0 bytes
622[ 8.226030] FS-Cache: Loaded
623[ 8.283120] random: nonblocking pool is initialized
624[ 8.296500] RPC: Registered named UNIX socket transport module.
625[ 8.296510] RPC: Registered udp transport module.
626[ 8.296512] RPC: Registered tcp transport module.
627[ 8.296515] RPC: Registered tcp NFSv4.1 backchannel transport module.
628[ 8.365397] FS-Cache: Netfs 'nfs' registered for caching
629[ 8.392121] systemd-udevd[173]: starting version 208
630[ 8.500179] systemd-journald[151]: Received request to flush runtime journal from PID 1
631[ 8.941321] ACPI: acpi_idle registered with cpuidle
632[ 9.009968] acpi-cpufreq: overriding BIOS provided _PSD data
633[ 9.068330] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
634[ 9.107309] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMB0 1 (20131115/utaddress-251)
635[ 9.107328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
636[ 9.196450] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
637[ 9.196557] sp5100_tco: PCI Revision ID: 0x42
638[ 9.196630] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
639[ 9.196645] sp5100_tco: Last reboot was not triggered by watchdog.
640[ 9.196748] sp5100_tco: initialized (0xffffc90002894b00). heartbeat=60 sec (nowayout=0)
641[ 9.477484] systemd-udevd[183]: renamed network interface eth0 to enp1s0
642[ 9.612603] input: PC Speaker as /devices/platform/pcspkr/input/input4
643[ 9.755611] microcode: CPU0: patch_level=0x05000101
644[ 9.954013] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
645[ 9.954539] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
646[ 9.954761] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
647[ 9.954977] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
648[ 9.955190] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
649[ 9.955396] microcode: CPU0: new patch_level=0x05000119
650[ 9.955414] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
651[ 9.955716] microcode: CPU1: patch_level=0x05000101
652[ 9.961824] microcode: CPU1: new patch_level=0x05000119
653[ 9.962246] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
654[ 9.962774] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
655[ 9.993837] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
656[ 10.120948] kvm: Nested Virtualization enabled
657[ 10.120960] kvm: Nested Paging enabled
658[ 10.141476] r8169 0000:01:00.0 enp1s0: link down
659[ 10.141548] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
660[ 13.924921] type=1006 audit(1328225308.909:2): pid=203 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
661[ 13.943184] type=1006 audit(1328225308.926:3): pid=350 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
662[ 497.036705] usb 1-2: new high-speed USB device number 3 using ehci-pci
663[ 497.283730] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
664[ 497.285691] r8712u: Staging version
665[ 497.285755] r8712u: register rtl8712_netdev_ops to netdev_ops
666[ 497.285768] usb 1-2: r8712u: USB_SPEED_HIGH with 4 endpoints
667[ 497.287415] usb 1-2: r8712u: Boot from EFUSE: Autoload OK
668[ 497.980599] usb 1-2: r8712u: CustomerID = 0x0000
669[ 497.980617] usb 1-2: r8712u: MAC Address from efuse = 44:33:4c:16:b9:c4
670[ 497.980627] usb 1-2: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
671[ 497.981692] usbcore: registered new interface driver r8712u
672[ 498.054208] systemd-udevd[390]: renamed network interface wlan0 to wlp0s18f2u2
673[ 531.247691] cfg80211: Calling CRDA to update world regulatory domain
674[ 531.963074] r8712u 1-2:1.0 wlp0s18f2u2: 1 RCR=0x153f00e
675[ 531.963860] r8712u 1-2:1.0 wlp0s18f2u2: 2 RCR=0x553f00e
676[ 532.072703] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u2: link is not ready
677[ 532.072831] cfg80211: World regulatory domain updated:
678[ 532.072849] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
679[ 532.072857] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
680[ 532.072864] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
681[ 532.072871] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
682[ 532.072877] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
683[ 532.072884] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
684[ 532.072890] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
685[ 997.961524] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u2: link is not ready
686[ 1023.527999] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u2: link becomes ready
687[ 1023.548109] r8712u 1-2:1.0 wlp0s18f2u2: r8712_got_addbareq_event_callback: mac = 10:0d:7f:c3:45:04, seq = 0, tid = 0
688[ 2814.279494] usb 2-1: new high-speed USB device number 2 using ehci-pci
689[ 2814.410023] usb-storage 2-1:1.0: USB Mass Storage device detected
690[ 2814.410484] scsi7 : usb-storage 2-1:1.0
691[ 2817.926897] scsi 7:0:0:0: Direct-Access TOSHIBA External USB 3.0 0101 PQ: 0 ANSI: 6
692[ 2817.934168] sd 7:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB)
693[ 2817.935398] sd 7:0:0:0: [sdb] Write Protect is off
694[ 2817.935409] sd 7:0:0:0: [sdb] Mode Sense: 1f 00 00 00
695[ 2817.936512] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
696[ 2818.073939] sdb: sdb1
697[ 2818.094692] sd 7:0:0:0: [sdb] Attached SCSI disk
698[ 2833.484694] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
699[ 2833.526430] XFS (sdb1): Mounting Filesystem
700[ 2833.847726] XFS (sdb1): Ending clean mount