blob: d897cae0a7c7180a76bd4e51333ffe49777c66ff [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: Emulation QEMU x86 q35/ich9/QEMU x86 q35/ich9, BIOS 4.5-932-g4a282b8-dirty 02/03/2017
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
39[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
40[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1ee00000-0x1effffff]
42[ 0.000000] [mem 0x1ee00000-0x1effffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1edfffff]
44[ 0.000000] [mem 0x1c000000-0x1edfffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f000000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f0c7000-0x1fe79fff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F0810 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB10E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFB2DC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB1280 001B38 (v01 CORE COREBOOT 00000002 INTL 20160831)
58[ 0.000000] ACPI: FACS 0x000000001FFB1240 000040
59[ 0.000000] ACPI: SSDT 0x000000001FFB2EC0 000068 (v02 CORE COREBOOT 0000002A CORE 0000002A)
60[ 0.000000] ACPI: MCFG 0x000000001FFB2F30 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: TCPA 0x000000001FFB2F70 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: APIC 0x000000001FFB2FB0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: HPET 0x000000001FFB3010 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: Local APIC address 0xfee00000
65[ 0.000000] No NUMA configuration found
66[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
67[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
68[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
69[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
70[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
71[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e000000-ffff88001e7fffff] on node 0
72[ 0.000000] Zone ranges:
73[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
74[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
75[ 0.000000] Normal empty
76[ 0.000000] Movable zone start for each node
77[ 0.000000] Early memory node ranges
78[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
79[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
80[ 0.000000] On node 0 totalpages: 130878
81[ 0.000000] DMA zone: 56 pages used for memmap
82[ 0.000000] DMA zone: 21 pages reserved
83[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
84[ 0.000000] DMA32 zone: 1735 pages used for memmap
85[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
86[ 0.000000] ACPI: PM-Timer IO Port: 0x608
87[ 0.000000] ACPI: Local APIC address 0xfee00000
88[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
89[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
90[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
92[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
93[ 0.000000] ACPI: IRQ0 used by override.
94[ 0.000000] ACPI: IRQ2 used by override.
95[ 0.000000] ACPI: IRQ9 used by override.
96[ 0.000000] Using ACPI (MADT) for SMP configuration information
97[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
98[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
99[ 0.000000] nr_irqs_gsi: 40
100[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
102[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
103[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
104[ 0.000000] Booting paravirtualized kernel on KVM
105[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
106[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001ee00000 s80896 r8192 d21504 u2097152
107[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
108[ 0.000000] pcpu-alloc: [0] 0
109[ 0.000000] KVM setup async PF for cpu 0
110[ 0.000000] kvm-stealtime: cpu 0, msr 1ee0d080
111[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
112[ 0.000000] Policy zone: DMA32
113[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
114[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
115[ 0.000000] AGP: Checking aperture...
116[ 0.000000] AGP: No AGP bridge found
117[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
118[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
119[ 0.000000] Memory: 489580K/523512K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 33932K reserved)
120[ 0.000000] Hierarchical RCU implementation.
121[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
122[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
123[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
124[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
125[ 0.000000] Console: colour VGA+ 80x25
126[ 0.000000] console [ttyS0] enabled
127[ 0.000000] hpet clockevent registered
128[ 0.000000] tsc: Detected 1600.019 MHz processor
129[ 0.008000] Calibrating delay loop (skipped) preset value.. 3200.03 BogoMIPS (lpj=6400076)
130[ 0.009177] pid_max: default: 32768 minimum: 301
131[ 0.011106] ACPI: Core revision 20140424
132[ 0.014210] ACPI: All ACPI Tables successfully acquired
133[ 0.017527] Security Framework initialized
134[ 0.019277] AppArmor: AppArmor disabled by boot time parameter
135[ 0.020008] Yama: disabled by default; enable with sysctl kernel.yama.*
136[ 0.022832] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
137[ 0.024000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
138[ 0.024000] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.024013] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
140[ 0.028360] Initializing cgroup subsys memory
141[ 0.030219] Initializing cgroup subsys devices
142[ 0.032023] Initializing cgroup subsys freezer
143[ 0.033891] Initializing cgroup subsys net_cls
144[ 0.036018] Initializing cgroup subsys blkio
145[ 0.037786] Initializing cgroup subsys perf_event
146[ 0.040010] Initializing cgroup subsys net_prio
147[ 0.042023] mce: CPU supports 10 MCE banks
148[ 0.044121] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
149Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
150tlb_flushall_shift: -1
151[ 0.068037] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
152[ 0.080361] ftrace: allocating 21614 entries in 85 pages
153[ 0.098447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
154[ 0.100005] smpboot: CPU0: AMD Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
155[ 0.108000] Performance Events: Broken PMU hardware detected, using software events only.
156[ 0.108006] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
157[ 0.114794] x86: Booted up 1 node, 1 CPUs
158[ 0.116005] smpboot: Total of 1 processors activated (3200.03 BogoMIPS)
159[ 0.120010] NMI watchdog: disabled (cpu0): hardware events not enabled
160[ 0.122878] devtmpfs: initialized
161[ 0.131664] pinctrl core: initialized pinctrl subsystem
162[ 0.132143] NET: Registered protocol family 16
163[ 0.134152] cpuidle: using governor ladder
164[ 0.136007] cpuidle: using governor menu
165[ 0.137759] ACPI: bus type PCI registered
166[ 0.140004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
167[ 0.142788] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
168[ 0.144006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
169[ 0.148692] PCI: Using configuration type 1 for base access
170[ 0.153933] ACPI: Added _OSI(Module Device)
171[ 0.156005] ACPI: Added _OSI(Processor Device)
172[ 0.157798] ACPI: Added _OSI(3.0 _SCP Extensions)
173[ 0.160004] ACPI: Added _OSI(Processor Aggregator Device)
174[ 0.170580] ACPI: Interpreter enabled
175[ 0.172009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
176[ 0.175640] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
177[ 0.178127] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
178[ 0.182114] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
179[ 0.186098] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
180[ 0.190119] ACPI: (supports S0)
181[ 0.191351] ACPI: Using IOAPIC for interrupt routing
182[ 0.192061] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
183[ 0.202186] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
184[ 0.204010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
185[ 0.208494] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
186[ 0.211775] PCI host bridge to bus 0000:00
187[ 0.212007] pci_bus 0000:00: root bus resource [bus 00-ff]
188[ 0.214128] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
189[ 0.216005] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
190[ 0.220006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
191[ 0.222564] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
192[ 0.224094] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
193[ 0.224972] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
194[ 0.232007] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
195[ 0.236006] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
196[ 0.262559] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
197[ 0.262920] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
198[ 0.268006] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
199[ 0.272005] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
200[ 0.298482] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
201[ 0.299415] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
202[ 0.300719] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
203[ 0.303963] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
204[ 0.304499] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
205[ 0.332006] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
206[ 0.336006] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
207[ 0.340946] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
208[ 0.341481] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
209[ 0.344689] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
210[ 0.347524] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
211[ 0.348993] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
212[ 0.352996] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
213[ 0.355793] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
214[ 0.356988] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
215[ 0.360994] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
216[ 0.364359] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
217[ 0.367003] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
218[ 0.368401] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
219[ 0.370594] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
220[ 0.372392] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
221[ 0.376019] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
222[ 0.378209] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
223[ 0.380397] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
224[ 0.382594] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
225[ 0.385014] ACPI: Enabled 16 GPEs in block 00 to 3F
226[ 0.387297] vgaarb: setting as boot device: PCI:0000:00:01.0
227[ 0.388000] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
228[ 0.388005] vgaarb: loaded
229[ 0.389110] vgaarb: bridge control possible 0000:00:01.0
230[ 0.392120] PCI: Using ACPI for IRQ routing
231[ 0.551819] PCI: pci_cache_line_size set to 64 bytes
232[ 0.552067] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
233[ 0.552072] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
234[ 0.552403] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
235[ 0.555345] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
236[ 0.556533] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
237[ 0.564081] Switched to clocksource kvm-clock
238[ 0.580837] pnp: PnP ACPI init
239[ 0.582148] ACPI: bus type PNP registered
240[ 0.583884] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
241[ 0.584037] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
242[ 0.584153] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
243[ 0.584396] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
244[ 0.584562] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
245[ 0.585308] pnp: PnP ACPI: found 5 devices
246[ 0.586927] ACPI: bus type PNP unregistered
247[ 0.597297] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
248[ 0.599867] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
249[ 0.599872] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
250[ 0.599876] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
251[ 0.599880] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
252[ 0.599932] NET: Registered protocol family 2
253[ 0.602092] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
254[ 0.604970] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
255[ 0.607490] TCP: Hash tables configured (established 4096 bind 4096)
256[ 0.610003] TCP: reno registered
257[ 0.611340] UDP hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.613731] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
259[ 0.616362] NET: Registered protocol family 1
260[ 0.618189] pci 0000:00:01.0: Video device with shadowed ROM
261[ 0.618301] PCI: CLS 64 bytes, default 64
262[ 0.618379] Unpacking initramfs...
263[ 1.144248] Freeing initrd memory: 14028K (ffff88001f0c7000 - ffff88001fe7a000)
264[ 1.147543] microcode: AMD CPU family 0x6 not supported
265[ 1.150278] futex hash table entries: 256 (order: 2, 16384 bytes)
266[ 1.152737] audit: initializing netlink subsys (disabled)
267[ 1.154894] audit: type=2000 audit(1486134616.512:1): initialized
268[ 1.157766] HugeTLB registered 2 MB page size, pre-allocated 0 pages
269[ 1.160296] zbud: loaded
270[ 1.161529] VFS: Disk quotas dquot_6.5.2
271[ 1.163113] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
272[ 1.165804] msgmni has been set to 983
273[ 1.167808] alg: No test for stdrng (krng)
274[ 1.169537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
275[ 1.172609] io scheduler noop registered
276[ 1.174187] io scheduler deadline registered
277[ 1.175969] io scheduler cfq registered (default)
278[ 1.178047] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
279[ 1.180342] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
280[ 1.183041] GHES: HEST is not enabled!
281[ 1.184706] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
282[ 1.226709] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
283[ 1.230405] Linux agpgart interface v0.103
284[ 1.232345] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
285[ 1.237205] serio: i8042 KBD port at 0x60,0x64 irq 1
286[ 1.239257] serio: i8042 AUX port at 0x60,0x64 irq 12
287[ 1.241617] mousedev: PS/2 mouse device common for all mice
288[ 1.244622] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
289[ 1.248288] rtc_cmos 00:00: RTC can wake from S4
290[ 1.251091] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
291[ 1.254029] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
292[ 1.257134] ledtrig-cpu: registered to indicate activity on CPUs
293[ 1.259705] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
294[ 1.262295] AMD IOMMUv2 functionality not available on this system
295[ 1.264991] TCP: cubic registered
296[ 1.266362] NET: Registered protocol family 10
297[ 1.268457] mip6: Mobile IPv6
298[ 1.269811] NET: Registered protocol family 17
299[ 1.271665] mpls_gso: MPLS GSO support
300[ 1.273643] registered taskstats version 1
301[ 1.275926] rtc_cmos 00:00: setting system clock to 2017-02-03 15:10:16 UTC (1486134616)
302[ 1.279317] PM: Hibernation image not present or could not be loaded.
303[ 1.281893] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
304[ 1.285087] Write protecting the kernel read-only data: 8192k
305[ 1.294048] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
306[ 1.298706] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
307[ 1.320220] systemd-udevd[52]: starting version 215
308[ 1.322712] random: systemd-udevd urandom read with 3 bits of entropy available
309[ 1.342617] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
310[ 1.345425] e1000: Copyright (c) 1999-2006 Intel Corporation.
311[ 1.360553] SCSI subsystem initialized
312[ 1.367507] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
313[ 1.374092] Floppy drive(s): fd0 is 1.44M
314[ 1.389107] FDC 0 is a S82078B
315[ 1.395185] libata version 3.00 loaded.
316[ 1.809458] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
317[ 1.812508] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
318[ 1.815408] ahci 0000:00:1f.2: version 3.0
319[ 1.816121] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
320[ 1.818779] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
321[ 1.819718] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
322[ 1.823041] ahci 0000:00:1f.2: flags: ncq only
323[ 1.829191] scsi0 : ahci
324[ 1.830491] scsi1 : ahci
325[ 1.831779] scsi2 : ahci
326[ 1.833094] scsi3 : ahci
327[ 1.834369] scsi4 : ahci
328[ 1.835661] scsi5 : ahci
329[ 1.836948] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
330[ 1.839864] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
331[ 1.842811] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
332[ 1.845734] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
333[ 1.848772] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
334[ 1.851852] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
335[ 2.144322] tsc: Refined TSC clocksource calibration: 1600.060 MHz
336[ 2.172648] ata6: SATA link down (SStatus 0 SControl 300)
337[ 2.176870] ata3: SATA link down (SStatus 0 SControl 300)
338[ 2.180984] ata4: SATA link down (SStatus 0 SControl 300)
339[ 2.184183] ata5: SATA link down (SStatus 0 SControl 300)
340[ 2.186660] ata2: SATA link down (SStatus 0 SControl 300)
341[ 2.189173] ata1: SATA link down (SStatus 0 SControl 300)
342[ 2.219696] FS-Cache: Loaded
343[ 2.227494] RPC: Registered named UNIX socket transport module.
344[ 2.229987] RPC: Registered udp transport module.
345[ 2.231892] RPC: Registered tcp transport module.
346[ 2.233790] RPC: Registered tcp NFSv4.1 backchannel transport module.
347[ 2.244808] FS-Cache: Netfs 'nfs' registered for caching
348[ 2.265866] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
349[ 4.265117] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
350[ 4.270316] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
351[ 4.521325] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
352[ 4.527437] systemd[1]: Detected virtualization 'kvm'.
353[ 4.529620] systemd[1]: Detected architecture 'x86-64'.
354[ 4.586104] systemd[1]: Inserted module 'autofs4'
355[ 4.590681] systemd[1]: Set hostname to <cb-test-tgt>.
356[ 4.963983] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
357[ 4.969933] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
358[ 4.978446] systemd[1]: Expecting device dev-ttyS0.device...
359[ 4.985016] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
360[ 4.988934] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
361[ 4.992808] systemd[1]: Starting Remote File Systems (Pre).
362[ 4.999726] systemd[1]: Reached target Remote File Systems (Pre).
363[ 5.003036] systemd[1]: Starting Encrypted Volumes.
364[ 5.009573] systemd[1]: Reached target Encrypted Volumes.
365[ 5.012364] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
366[ 5.021984] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
367[ 5.026729] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
368[ 5.030816] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
369[ 5.034775] systemd[1]: Starting Paths.
370[ 5.040225] systemd[1]: Reached target Paths.
371[ 5.042401] systemd[1]: Starting Swap.
372[ 5.047979] systemd[1]: Reached target Swap.
373[ 5.050190] systemd[1]: Starting Root Slice.
374[ 5.056109] systemd[1]: Created slice Root Slice.
375[ 5.058447] systemd[1]: Starting Delayed Shutdown Socket.
376[ 5.065307] systemd[1]: Listening on Delayed Shutdown Socket.
377[ 5.068282] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
378[ 5.076942] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
379[ 5.080444] systemd[1]: Starting Journal Socket (/dev/log).
380[ 5.087867] systemd[1]: Listening on Journal Socket (/dev/log).
381[ 5.090935] systemd[1]: Starting udev Kernel Socket.
382[ 5.097320] systemd[1]: Listening on udev Kernel Socket.
383[ 5.100054] systemd[1]: Starting udev Control Socket.
384[ 5.106723] systemd[1]: Listening on udev Control Socket.
385[ 5.109480] systemd[1]: Starting User and Session Slice.
386[ 5.116242] systemd[1]: Created slice User and Session Slice.
387[ 5.119554] systemd[1]: Starting Journal Socket.
388[ 5.125996] systemd[1]: Listening on Journal Socket.
389[ 5.128524] systemd[1]: Starting System Slice.
390[ 5.134601] systemd[1]: Created slice System Slice.
391[ 5.137159] systemd[1]: Starting Increase datagram queue length...
392[ 5.144605] systemd[1]: Starting udev Coldplug all Devices...
393[ 5.193931] systemd[1]: Starting Load Kernel Modules...
394[ 5.221055] systemd[1]: Started Set Up Additional Binary Formats.
395[ 5.235005] systemd[1]: Mounting Debug File System...
396[ 5.255489] systemd[1]: Starting Create list of required static device nodes for the current kernel...
397[ 5.286099] systemd[1]: Mounting POSIX Message Queue File System...
398[ 5.307666] systemd[1]: Mounting Huge Pages File System...
399[ 5.323279] systemd[1]: Starting system-getty.slice.
400[ 5.342928] systemd[1]: Created slice system-getty.slice.
401[ 5.346374] systemd[1]: Starting system-serial\x2dgetty.slice.
402[ 5.355058] systemd[1]: Created slice system-serial\x2dgetty.slice.
403[ 5.358783] systemd[1]: Starting Slices.
404[ 5.366780] systemd[1]: Reached target Slices.
405[ 5.369059] systemd[1]: Starting Remount Root and Kernel File Systems...
406[ 5.387416] systemd[1]: Mounted Huge Pages File System.
407[ 5.397905] systemd[1]: Mounted POSIX Message Queue File System.
408[ 5.404858] systemd[1]: Mounted Debug File System.
409[ 5.411761] systemd[1]: Started Increase datagram queue length.
410[ 5.421182] systemd[1]: Started Load Kernel Modules.
411[ 5.440185] systemd[1]: Started Create list of required static device nodes for the current kernel.
412[ 5.455221] systemd[1]: Started Remount Root and Kernel File Systems.
413[ 5.465856] systemd[1]: Started udev Coldplug all Devices.
414[ 5.534955] systemd[1]: Started Various fixups to make systemd work better on Debian.
415[ 5.538963] systemd[1]: Starting Load/Save Random Seed...
416[ 5.545895] systemd[1]: Starting Create Static Device Nodes in /dev...
417[ 5.561652] systemd[1]: Starting Apply Kernel Variables...
418[ 5.582938] systemd[1]: Mounted Configuration File System.
419[ 5.591670] systemd[1]: Mounted FUSE Control File System.
420[ 5.602905] systemd[1]: Starting Syslog Socket.
421[ 5.624460] systemd[1]: Listening on Syslog Socket.
422[ 5.627143] systemd[1]: Starting Sockets.
423[ 5.648905] systemd[1]: Reached target Sockets.
424[ 5.652536] systemd[1]: Starting Journal Service...
425[ 5.670515] systemd[1]: Started Journal Service.
426[ 5.819452] systemd-udevd[146]: starting version 215
427[ 6.247718] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
428[ 6.278758] ACPI: Power Button [PWRF]
429[ 6.315264] parport_pc 00:03: reported by Plug and Play ACPI
430[ 6.319039] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
431[ 6.372202] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
432[ 6.381287] input: PC Speaker as /devices/platform/pcspkr/input/input3
433[ 6.397233] [drm] Initialized drm 1.1.0 20060810
434[ 6.401875] i801_smbus 0000:00:1f.3: Enabling SMBus device
435[ 6.449002] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
436[ 6.530375] ppdev: user-space parallel port driver
437[ 6.551863] iTCO_vendor_support: vendor-support=0
438[ 6.559047] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
439[ 6.561795] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
440[ 6.564652] iTCO_wdt: timeout value out of range, using 30
441[ 6.584272] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
442[ 6.962100] Key type dns_resolver registered
443[ 6.989405] NFS: Registering the id_resolver key type
444[ 6.992907] Key type id_resolver registered
445[ 7.000204] Key type id_legacy registered
446[ 7.299626] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
447[ 7.326756] systemd-journald[145]: Received request to flush runtime journal from PID 1
448[ 7.346559] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
449[ 7.383980] random: nonblocking pool is initialized
450[ 37.676176] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****