Gitiles
Code Review Sign In
review.coreboot.org / board-status / 0a808bbfe03e7cccad052e9be19d9639b3e2c5e3 / . / asus / kfsn4-dre / 4.0-9368-g1abb600 / 2015-04-21T15:49:52Z / kernel_log.txt
blob: e7b6183814afed953c414673a3e20ea78f67c488 [file] [log] [blame]
Raptor Engineering Automated Test Stand0a808bb2015-04-21 16:17:33 +0000[diff] [blame^]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
12[ 0.000000] NX (Execute Disable) protection: active
13[ 0.000000] SMBIOS 2.7 present.
14[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9368-g1abb600-dirty 04/21/2015
15[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
16[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
17[ 0.000000] AGP: No AGP bridge found
18[ 0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
26[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
27[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
28[ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 0000000160000000 aka 5632M
34[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
35[ 0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
36[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
37[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
38[ 0.000000] Using GB pages for direct mapping
39[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
40[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
41[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
45[ 0.000000] [mem 0x15fe00000-0x15fffffff] page 2M
46[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
48[ 0.000000] [mem 0x15c000000-0x15fdfffff] page 2M
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
50[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
51[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
53[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
54[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
55[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
56[ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
57[ 0.000000] [mem 0xdfe00000-0xdffa8fff] page 4k
58[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
59[ 0.000000] ACPI: Early table checksum verification disabled
60[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
61[ 0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
64[ 0.000000] ACPI: FACS 0x00000000DFFB2210 000040
65[ 0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
66[ 0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
91[ 0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
93[ 0.000000] NODE_DATA [mem 0x11fffb000-0x11fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
95[ 0.000000] NODE_DATA [mem 0x15fff9000-0x15fffdfff]
96[ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
97[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
98[ 0.000000] [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
99[ 0.000000] Zone ranges:
100[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
101[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
102[ 0.000000] Normal [mem 0x100000000-0x15fffffff]
103[ 0.000000] Movable zone start for each node
104[ 0.000000] Early memory node ranges
105[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
106[ 0.000000] node 0: [mem 0x00100000-0xdffa8fff]
107[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
108[ 0.000000] node 1: [mem 0x120000000-0x15fffffff]
109[ 0.000000] On node 0 totalpages: 1048391
110[ 0.000000] DMA zone: 56 pages used for memmap
111[ 0.000000] DMA zone: 21 pages reserved
112[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
113[ 0.000000] DMA32 zone: 12487 pages used for memmap
114[ 0.000000] DMA32 zone: 913321 pages, LIFO batch:31
115[ 0.000000] Normal zone: 1792 pages used for memmap
116[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
117[ 0.000000] On node 1 totalpages: 262144
118[ 0.000000] Normal zone: 3584 pages used for memmap
119[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
120[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
121[ 0.000000] ACPI: Local APIC address 0xfee00000
122[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
129[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
137[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
138[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
139[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
142[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
143[ 0.000000] ACPI: IRQ9 used by override.
144[ 0.000000] ACPI: IRQ14 used by override.
145[ 0.000000] ACPI: IRQ15 used by override.
146[ 0.000000] Using ACPI (MADT) for SMP configuration information
147[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
148[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
149[ 0.000000] nr_irqs_gsi: 40
150[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
152[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
154[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
155[ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
156[ 0.000000] Booting paravirtualized kernel on bare hardware
157[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
158[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
159[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
160[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
161[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292595
162[ 0.000000] Policy zone: Normal
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
173[ 0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.840 MHz processor
187[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.68 BogoMIPS (lpj=7639360)
188[ 0.010953] pid_max: default: 32768 minimum: 301
189[ 0.015676] ACPI: Core revision 20140424
190[ 0.022055] ACPI: All ACPI Tables successfully acquired
191[ 0.027566] Security Framework initialized
192[ 0.031745] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037658] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045474] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058788] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068674] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075694] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083658] Initializing cgroup subsys memory
199[ 0.088122] Initializing cgroup subsys devices
200[ 0.092666] Initializing cgroup subsys freezer
201[ 0.097190] Initializing cgroup subsys net_cls
202[ 0.101725] Initializing cgroup subsys blkio
203[ 0.106081] Initializing cgroup subsys perf_event
204[ 0.110878] Initializing cgroup subsys net_prio
205[ 0.115544] tseg: 0000000000
206[ 0.115558] CPU: Physical Processor ID: 0
207[ 0.119678] CPU: Processor Core ID: 0
208[ 0.124471] mce: CPU supports 6 MCE banks
209[ 0.128609] LVT offset 0 assigned for vector 0xf9
210[ 0.133401] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148889] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158024] ftrace: allocating 21601 entries in 85 pages
215[ 0.173472] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219124] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336310] Performance Events: AMD PMU driver.
218[ 0.341036] ... version: 0
219[ 0.345131] ... bit width: 48
220[ 0.349313] ... generic registers: 4
221[ 0.353411] ... value mask: 0000ffffffffffff
222[ 0.358810] ... max period: 00007fffffffffff
223[ 0.364209] ... fixed-purpose events: 0
224[ 0.368310] ... event mask: 000000000000000f
225[ 0.376334] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384648] x86: Booting SMP configuration:
227[ 0.388925] .... node #0, CPUs: #1 #2 #3
228[ 0.433520] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585098] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589534] smpboot: Total of 8 processors activated (30557.95 BogoMIPS)
231[ 0.602185] devtmpfs: initialized
232[ 0.614207] pinctrl core: initialized pinctrl subsystem
233[ 0.619665] NET: Registered protocol family 16
234[ 0.624405] cpuidle: using governor ladder
235[ 0.628580] cpuidle: using governor menu
236[ 0.632589] node 0 link 1: io port [1000, 3fff]
237[ 0.632592] TOM: 00000000e0000000 aka 3584M
238[ 0.636854] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
239[ 0.636858] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636861] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636863] TOM2: 0000000160000000 aka 5632M
242[ 0.641204] bus: [bus 00-05] on node 0 link 1
243[ 0.641206] bus: 00 [io 0x0000-0xffff]
244[ 0.641208] bus: 00 [mem 0xf0000000-0xffffffff]
245[ 0.641209] bus: 00 [mem 0x160000000-0xfcffffffff]
246[ 0.641316] ACPI: bus type PCI registered
247[ 0.645405] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652086] PCI: Using configuration type 1 for base access
249[ 0.657736] PCI: Using configuration type 1 for extended access
250[ 0.664353] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670712] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676537] mtrr: corrected configuration.
253[ 0.693205] ACPI: Added _OSI(Module Device)
254[ 0.697508] ACPI: Added _OSI(Processor Device)
255[ 0.702021] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706806] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715747] ACPI: Interpreter enabled
258[ 0.719489] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.728932] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738370] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747808] ACPI: (supports S0 S1 S5)
262[ 0.751569] ACPI: Using IOAPIC for interrupt routing
263[ 0.756653] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785459] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791721] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.800034] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.839219] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.849358] PCI host bridge to bus 0000:00
269[ 0.853524] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.859082] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.865340] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.872287] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.879236] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.885503] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.885695] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.885703] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.885834] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.885845] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.885870] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.885878] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.885902] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.886007] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.886021] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.886050] pci 0000:00:02.0: supports D1 D2
285[ 0.886079] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.886144] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.891956] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.891969] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.892010] pci 0000:00:02.1: supports D1 D2
290[ 0.892029] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.892103] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.897916] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.897942] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.897970] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.905197] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.911804] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.919033] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.925745] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.925757] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.925762] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.925766] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.925771] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.925776] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.925780] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.925894] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.925903] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.925908] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.925913] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.925917] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.925922] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.925927] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.926101] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.926195] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.932007] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.932058] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.932107] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.937925] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.937980] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.938041] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.943864] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.943915] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.943966] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.949768] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.949816] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.949875] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.955693] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.955847] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.955969] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.956086] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.956191] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.956333] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.956467] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.956588] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.956729] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.956905] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.957097] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.957126] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.957133] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.957140] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.957188] pci 0000:01:04.0: supports D1 D2
341[ 0.957297] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.962359] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.962362] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.962365] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.962493] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.962527] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.962563] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
348[ 0.962632] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.962732] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.972842] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.977884] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.977994] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.978029] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.978131] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.978220] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.988341] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.993398] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.993473] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.998604] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.003686] pci_bus 0000:00: on NUMA node 0
361[ 1.003789] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.010231] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.016650] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.024308] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.031975] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.039652] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.047311] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.053729] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.060172] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.067816] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.075479] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.083123] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.089555] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.095977] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.103654] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.111315] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.118977] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.128095] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.134808] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.141510] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.148211] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.155216] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.160479] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.166263] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.174452] vgaarb: loaded
386[ 1.177255] vgaarb: bridge control possible 0000:01:04.0
387[ 1.182819] PCI: Using ACPI for IRQ routing
388[ 1.187101] PCI: pci_cache_line_size set to 64 bytes
389[ 1.187158] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.187162] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
391[ 1.187479] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.194616] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.199900] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.208627] Switched to clocksource hpet
395[ 1.224170] pnp: PnP ACPI init
396[ 1.227385] ACPI: bus type PNP registered
397[ 1.232018] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.232097] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.232196] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.232275] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.232315] pnp 00:04: [dma 2]
402[ 1.232358] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.232380] pnp: PnP ACPI: found 5 devices
404[ 1.236564] ACPI: bus type PNP unregistered
405[ 1.248648] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
406[ 1.258710] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.263763] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.269941] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.276805] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.284144] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.291494] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.296546] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.303422] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.308467] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.315343] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.320390] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.325433] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.325436] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.325439] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.325441] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.325444] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.325447] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.325449] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.325452] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.325455] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.325585] NET: Registered protocol family 2
427[ 1.330531] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.338310] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.345724] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.352432] TCP: reno registered
431[ 1.355747] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.362023] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.368883] NET: Registered protocol family 1
434[ 1.373744] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.379958] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.385950] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.391560] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.397154] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.402810] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.408417] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.413996] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.419655] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.425249] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.430837] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.436496] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.442106] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.447695] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.453357] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.458957] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.458966] PCI: CLS 64 bytes, default 64
451[ 1.459073] Unpacking initramfs...
452[ 1.692267] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.700235] PCI-DMA: Disabling AGP.
454[ 1.705443] PCI-DMA: aperture base @ d4000000 size 65536 KB
455[ 1.711116] PCI-DMA: using GART IOMMU.
456[ 1.714939] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.727060] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.735404] microcode: CPU0: patch_level=0x01000096
459[ 1.740405] microcode: CPU1: patch_level=0x01000096
460[ 1.745421] microcode: CPU2: patch_level=0x01000096
461[ 1.750434] microcode: CPU3: patch_level=0x01000096
462[ 1.755443] microcode: CPU4: patch_level=0x01000096
463[ 1.760444] microcode: CPU5: patch_level=0x01000096
464[ 1.765442] microcode: CPU6: patch_level=0x01000096
465[ 1.771542] microcode: CPU7: patch_level=0x01000096
466[ 1.776629] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.785568] LVT offset 1 assigned for vector 0x400
468[ 1.790475] IBS: LVT offset 1 assigned
469[ 1.794348] perf: AMD IBS detected (0x00000007)
470[ 1.799574] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.806050] audit: initializing netlink subsys (disabled)
472[ 1.811560] audit: type=2000 audit(1429633009.624:1): initialized
473[ 1.818465] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.825001] zbud: loaded
475[ 1.827958] VFS: Disk quotas dquot_6.5.2
476[ 1.832018] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.838649] msgmni has been set to 9941
478[ 1.843114] alg: No test for stdrng (krng)
479[ 1.847403] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.855036] io scheduler noop registered
481[ 1.859059] io scheduler deadline registered
482[ 1.863494] io scheduler cfq registered (default)
483[ 1.868506] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.868634] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.868758] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.868871] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.869020] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.869048] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.869073] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.869099] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.869119] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.876222] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.882866] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.882876] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.889924] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.896532] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.896543] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.903586] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.903598] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.910638] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.910667] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.916361] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.923192] GHES: HEST is not enabled!
504[ 1.927159] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.953945] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.981741] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.989760] Linux agpgart interface v0.103
508[ 1.994180] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.004562] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.009656] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.014990] mousedev: PS/2 mouse device common for all mice
512[ 2.020794] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.025995] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.032492] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.040452] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.046717] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.053261] AMD IOMMUv2 functionality not available on this system
518[ 2.059663] TCP: cubic registered
519[ 2.063212] NET: Registered protocol family 10
520[ 2.068184] mip6: Mobile IPv6
521[ 2.071256] NET: Registered protocol family 17
522[ 2.075860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.084624] mpls_gso: MPLS GSO support
524[ 2.089361] registered taskstats version 1
525[ 2.094280] rtc_cmos rtc_cmos: setting system clock to 2015-04-21 16:16:51 UTC (1429633011)
526[ 2.102866] PM: Hibernation image not present or could not be loaded.
527[ 2.104709] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.112701] Write protecting the kernel read-only data: 8192k
529[ 2.122064] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.130821] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.150952] systemd-udevd[99]: starting version 215
532[ 2.156526] random: systemd-udevd urandom read with 3 bits of entropy available
533[ 2.179420] ACPI: bus type USB registered
534[ 2.183720] usbcore: registered new interface driver usbfs
535[ 2.183763] pps_core: LinuxPPS API ver. 1 registered
536[ 2.183765] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
537[ 2.203651] usbcore: registered new interface driver hub
538[ 2.209294] usbcore: registered new device driver usb
539[ 2.209308] PTP clock support registered
540[ 2.220158] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.220193] tg3.c:v3.137 (May 11, 2014)
542[ 2.220206] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.220439] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
544[ 2.243060] ehci-pci: EHCI PCI platform driver
545[ 2.247840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.247954] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.247973] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.247992] ehci-pci 0000:00:02.1: debug port 1
549[ 2.248039] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.248069] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.256291] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.256368] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.256370] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.256372] usb usb1: Product: EHCI Host Controller
555[ 2.256373] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.256374] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.256617] hub 1-0:1.0: USB hub found
558[ 2.256627] hub 1-0:1.0: 10 ports detected
559[ 2.321675] ohci-pci: OHCI PCI platform driver
560[ 2.326459] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.332149] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.339701] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.371453] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.381849] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.391707] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.399670] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.406545] tg3 0000:03:00.0: enabling device (0004 -> 0006)
568[ 2.408655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
569[ 2.408657] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
570[ 2.408660] usb usb2: Product: OHCI PCI host controller
571[ 2.408661] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
572[ 2.408662] usb usb2: SerialNumber: 0000:00:02.0
573[ 2.409012] hub 2-0:1.0: USB hub found
574[ 2.409060] hub 2-0:1.0: 10 ports detected
575[ 2.450796] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.508673] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.519122] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.528991] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.536927] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.550136] FS-Cache: Loaded
581[ 2.557334] RPC: Registered named UNIX socket transport module.
582[ 2.564028] RPC: Registered udp transport module.
583[ 2.570094] RPC: Registered tcp transport module.
584[ 2.576184] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.588539] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.602307] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.648253] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.724125] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.727863] Switched to clocksource tsc
590[ 4.240482] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.247173] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.254172] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 7.094566] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 7.108752] systemd[1]: Detected architecture 'x86-64'.
595[ 7.281803] random: nonblocking pool is initialized
596[ 7.322132] systemd[1]: Inserted module 'autofs4'
597[ 7.328998] systemd[1]: Set hostname to <cb-test-tgt>.
598[ 7.734463] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 7.747360] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 7.762715] systemd[1]: Expecting device dev-ttyS0.device...
601[ 7.778529] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 7.786522] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 7.794229] systemd[1]: Starting Remote File Systems (Pre).
604[ 7.810488] systemd[1]: Reached target Remote File Systems (Pre).
605[ 7.816850] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
606[ 7.838473] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
607[ 7.848125] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 7.856385] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 7.864430] systemd[1]: Starting Paths.
610[ 7.878392] systemd[1]: Reached target Paths.
611[ 7.882902] systemd[1]: Starting Encrypted Volumes.
612[ 7.898379] systemd[1]: Reached target Encrypted Volumes.
613[ 7.903925] systemd[1]: Starting Swap.
614[ 7.918353] systemd[1]: Reached target Swap.
615[ 7.922749] systemd[1]: Starting Root Slice.
616[ 7.942397] systemd[1]: Created slice Root Slice.
617[ 7.947273] systemd[1]: Starting User and Session Slice.
618[ 7.962385] systemd[1]: Created slice User and Session Slice.
619[ 7.968313] systemd[1]: Starting Delayed Shutdown Socket.
620[ 7.982351] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 7.988234] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 8.006358] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 8.013454] systemd[1]: Starting Journal Socket (/dev/log).
624[ 8.030324] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 8.036375] systemd[1]: Starting Syslog Socket.
626[ 8.050353] systemd[1]: Listening on Syslog Socket.
627[ 8.056649] systemd[1]: Starting udev Kernel Socket.
628[ 8.070299] systemd[1]: Listening on udev Kernel Socket.
629[ 8.075730] systemd[1]: Starting udev Control Socket.
630[ 8.090297] systemd[1]: Listening on udev Control Socket.
631[ 8.095832] systemd[1]: Starting Journal Socket.
632[ 8.110285] systemd[1]: Listening on Journal Socket.
633[ 8.115379] systemd[1]: Starting Sockets.
634[ 8.130281] systemd[1]: Reached target Sockets.
635[ 8.134941] systemd[1]: Starting System Slice.
636[ 8.150277] systemd[1]: Created slice System Slice.
637[ 8.155297] systemd[1]: Starting system-getty.slice.
638[ 8.170292] systemd[1]: Created slice system-getty.slice.
639[ 8.175869] systemd[1]: Starting system-serial\x2dgetty.slice.
640[ 8.194277] systemd[1]: Created slice system-serial\x2dgetty.slice.
641[ 8.201229] systemd[1]: Starting Create list of required static device nodes for the current kernel...
642[ 8.223582] systemd[1]: Mounting Debug File System...
643[ 8.256089] systemd[1]: Started Set Up Additional Binary Formats.
644[ 8.262368] systemd[1]: Mounting Huge Pages File System...
645[ 8.307838] systemd[1]: Starting Load Kernel Modules...
646[ 8.323263] systemd[1]: Mounting POSIX Message Queue File System...
647[ 8.339234] systemd[1]: Starting udev Coldplug all Devices...
648[ 8.355674] systemd[1]: Starting Journal Service...
649[ 8.378214] systemd[1]: Started Journal Service.
650[ 9.007839] systemd-udevd[187]: starting version 215
651[ 9.294055] systemd-journald[168]: Received request to flush runtime journal from PID 1
652[ 9.745069] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
653[ 9.753139] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
654[ 9.770844] EDAC MC: Ver: 3.0.0
655[ 9.774757] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
656[ 9.783318] ACPI: Power Button [PWRB]
657[ 9.787231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
658[ 9.794899] ACPI: Power Button [PWRF]
659[ 9.829668] FDC 0 is a post-1991 82077
660[ 9.907805] SCSI subsystem initialized
661[ 9.912029] MCE: In-kernel MCE decoding enabled.
662[ 9.921428] acpi-cpufreq: overriding BIOS provided _PSD data
663[ 9.929832] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
664[ 9.936959] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
665[ 9.957448] libata version 3.00 loaded.
666[ 10.159258] AMD64 EDAC driver v3.4.0
667[ 10.163815] input: PC Speaker as /devices/platform/pcspkr/input/input4
668[ 10.266562] kvm: Nested Virtualization enabled
669[ 10.271108] kvm: Nested Paging enabled
670[ 13.180515] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
671[ 13.186020] EDAC amd64: DRAM ECC enabled.
672[ 13.186064] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
673[ 13.196955] EDAC amd64: F10h detected (node 0).
674[ 13.201661] EDAC MC: DCT0 chip selects:
675[ 13.201665] EDAC amd64: MC: 0: 0MB 1: 0MB
676[ 13.206486] EDAC amd64: MC: 2: 0MB 3: 0MB
677[ 13.211212] EDAC amd64: MC: 4: 0MB 5: 0MB
678[ 13.216011] EDAC amd64: MC: 6: 1024MB 7: 1024MB
679[ 13.220809] EDAC MC: DCT1 chip selects:
680[ 13.220812] EDAC amd64: MC: 0: 0MB 1: 0MB
681[ 13.226953] EDAC amd64: MC: 2: 0MB 3: 0MB
682[ 13.233054] EDAC amd64: MC: 4: 0MB 5: 0MB
683[ 13.239162] EDAC amd64: MC: 6: 1024MB 7: 1024MB
684[ 13.245256] EDAC amd64: using x4 syndromes.
685[ 13.249702] EDAC amd64: MCT channel count: 2
686[ 13.254126] EDAC amd64: CS6: Registered DDR2 RAM
687[ 13.258835] EDAC amd64: CS7: Registered DDR2 RAM
688[ 13.263966] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
689[ 13.273879] pata_amd 0000:00:06.0: version 0.4.1
690[ 13.274732] scsi0 : pata_amd
691[ 13.278043] scsi1 : pata_amd
692[ 13.281101] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
693[ 13.288156] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
694[ 13.295342] sata_nv 0000:00:07.0: version 3.5
695[ 13.295668] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
696[ 13.302331] scsi2 : sata_nv
697[ 13.305454] scsi3 : sata_nv
698[ 13.308420] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
699[ 13.315669] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
700[ 13.323203] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
701[ 13.329531] scsi4 : sata_nv
702[ 13.332604] scsi5 : sata_nv
703[ 13.335559] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
704[ 13.342788] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
705[ 13.350086] EDAC amd64: DRAM ECC enabled.
706[ 13.354337] EDAC amd64: F10h detected (node 1).
707[ 13.359057] EDAC MC: DCT0 chip selects:
708[ 13.359061] EDAC amd64: MC: 0: 1024MB 1: 0MB
709[ 13.363870] EDAC amd64: MC: 2: 0MB 3: 0MB
710[ 13.368680] EDAC amd64: MC: 4: 0MB 5: 0MB
711[ 13.373482] EDAC amd64: MC: 6: 0MB 7: 0MB
712[ 13.378294] EDAC MC: DCT1 chip selects:
713[ 13.378303] EDAC amd64: MC: 0: 0MB 1: 0MB
714[ 13.383110] EDAC amd64: MC: 2: 0MB 3: 0MB
715[ 13.387916] EDAC amd64: MC: 4: 0MB 5: 0MB
716[ 13.392729] EDAC amd64: MC: 6: 0MB 7: 0MB
717[ 13.397533] EDAC amd64: using x4 syndromes.
718[ 13.401819] EDAC amd64: MCT channel count: 1
719[ 13.406272] EDAC amd64: CS0: Registered DDR2 RAM
720[ 13.411318] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
721[ 13.421267] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
722[ 13.632352] ata3: SATA link down (SStatus 0 SControl 300)
723[ 13.660349] ata5: SATA link down (SStatus 0 SControl 300)
724[ 13.948249] ata4: SATA link down (SStatus 0 SControl 300)
725[ 14.264138] ata6: SATA link down (SStatus 0 SControl 300)
726[ 41.402584] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****