Gitiles
Code Review Sign In
review.coreboot.org / board-status / 045690eec5ee79099093ce35caf837c539e739d8 / . / asus / kfsn4-dre / 4.0-9481-g7f845b3 / 2015-04-25T10:16:58Z / kernel_log.txt
blob: 35871d57c7f9cd1cbdacc8453f03b22fb4d29ab0 [file] [log] [blame]
Raptor Engineering Automated Test Stand62ebf5a2015-04-25 11:15:58 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
12[ 0.000000] NX (Execute Disable) protection: active
13[ 0.000000] SMBIOS 2.7 present.
14[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9481-g7f845b3-dirty 04/25/2015
15[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
16[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
17[ 0.000000] AGP: No AGP bridge found
18[ 0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
26[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
27[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
28[ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 0000000160000000 aka 5632M
34[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
35[ 0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
36[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
37[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
38[ 0.000000] Using GB pages for direct mapping
39[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
40[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
41[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
45[ 0.000000] [mem 0x15fe00000-0x15fffffff] page 2M
46[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
48[ 0.000000] [mem 0x15c000000-0x15fdfffff] page 2M
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
50[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
51[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
53[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
54[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
55[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
56[ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
57[ 0.000000] [mem 0xdfe00000-0xdffaafff] page 4k
58[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
59[ 0.000000] ACPI: Early table checksum verification disabled
60[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
61[ 0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
64[ 0.000000] ACPI: FACS 0x00000000DFFB4210 000040
65[ 0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
66[ 0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
91[ 0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
93[ 0.000000] NODE_DATA [mem 0x11fffb000-0x11fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
95[ 0.000000] NODE_DATA [mem 0x15fff9000-0x15fffdfff]
96[ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
97[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
98[ 0.000000] [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
99[ 0.000000] Zone ranges:
100[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
101[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
102[ 0.000000] Normal [mem 0x100000000-0x15fffffff]
103[ 0.000000] Movable zone start for each node
104[ 0.000000] Early memory node ranges
105[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
106[ 0.000000] node 0: [mem 0x00100000-0xdffaafff]
107[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
108[ 0.000000] node 1: [mem 0x120000000-0x15fffffff]
109[ 0.000000] On node 0 totalpages: 1048393
110[ 0.000000] DMA zone: 56 pages used for memmap
111[ 0.000000] DMA zone: 21 pages reserved
112[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
113[ 0.000000] DMA32 zone: 12487 pages used for memmap
114[ 0.000000] DMA32 zone: 913323 pages, LIFO batch:31
115[ 0.000000] Normal zone: 1792 pages used for memmap
116[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
117[ 0.000000] On node 1 totalpages: 262144
118[ 0.000000] Normal zone: 3584 pages used for memmap
119[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
120[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
121[ 0.000000] ACPI: Local APIC address 0xfee00000
122[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
129[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
137[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
138[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
139[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
142[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
143[ 0.000000] ACPI: IRQ9 used by override.
144[ 0.000000] ACPI: IRQ14 used by override.
145[ 0.000000] ACPI: IRQ15 used by override.
146[ 0.000000] Using ACPI (MADT) for SMP configuration information
147[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
148[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
149[ 0.000000] nr_irqs_gsi: 40
150[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
152[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
154[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
155[ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
156[ 0.000000] Booting paravirtualized kernel on bare hardware
157[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
158[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
159[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
160[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
161[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292597
162[ 0.000000] Policy zone: Normal
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
Raptor Engineering Automated Test Standf8281e92015-04-25 20:31:14 +0000[diff] [blame]166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
Raptor Engineering Automated Test Stand62ebf5a2015-04-25 11:15:58 +0000[diff] [blame]167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
173[ 0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
Raptor Engineering Automated Test Standf8281e92015-04-25 20:31:14 +0000[diff] [blame]186[ 0.000000] tsc: Detected 1909.763 MHz processor
187[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.52 BogoMIPS (lpj=7639052)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015675] ACPI: Core revision 20140424
190[ 0.022057] ACPI: All ACPI Tables successfully acquired
191[ 0.027576] Security Framework initialized
192[ 0.031753] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037663] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045472] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058787] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068688] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075713] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083674] Initializing cgroup subsys memory
199[ 0.088140] Initializing cgroup subsys devices
200[ 0.092684] Initializing cgroup subsys freezer
201[ 0.097207] Initializing cgroup subsys net_cls
202[ 0.101752] Initializing cgroup subsys blkio
203[ 0.106107] Initializing cgroup subsys perf_event
204[ 0.110904] Initializing cgroup subsys net_prio
205[ 0.115561] tseg: 0000000000
206[ 0.115575] CPU: Physical Processor ID: 0
207[ 0.119695] CPU: Processor Core ID: 0
208[ 0.124499] mce: CPU supports 6 MCE banks
209[ 0.128617] LVT offset 0 assigned for vector 0xf9
210[ 0.133409] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Raptor Engineering Automated Test Stand62ebf5a2015-04-25 11:15:58 +0000[diff] [blame]211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
Raptor Engineering Automated Test Standf8281e92015-04-25 20:31:14 +0000[diff] [blame]213[ 0.148888] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158024] ftrace: allocating 21601 entries in 85 pages
215[ 0.173476] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219121] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
Raptor Engineering Automated Test Standc7a0c882015-04-25 20:16:48 +0000[diff] [blame]217[ 0.336304] Performance Events: AMD PMU driver.
Raptor Engineering Automated Test Standf8281e92015-04-25 20:31:14 +0000[diff] [blame]218[ 0.341013] ... version: 0
219[ 0.345094] ... bit width: 48
220[ 0.349269] ... generic registers: 4
221[ 0.353359] ... value mask: 0000ffffffffffff
222[ 0.358744] ... max period: 00007fffffffffff
223[ 0.364123] ... fixed-purpose events: 0
224[ 0.368199] ... event mask: 000000000000000f
225[ 0.376177] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384522] x86: Booting SMP configuration:
227[ 0.388805] .... node #0, CPUs: #1 #2 #3
228[ 0.433410] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585096] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589525] smpboot: Total of 8 processors activated (30557.32 BogoMIPS)
231[ 0.602180] devtmpfs: initialized
232[ 0.614173] pinctrl core: initialized pinctrl subsystem
233[ 0.619639] NET: Registered protocol family 16
234[ 0.624373] cpuidle: using governor ladder
235[ 0.628546] cpuidle: using governor menu
236[ 0.632553] node 0 link 1: io port [1000, 3fff]
237[ 0.632557] TOM: 00000000e0000000 aka 3584M
238[ 0.636820] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
239[ 0.636824] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636828] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636830] TOM2: 0000000160000000 aka 5632M
242[ 0.641168] bus: [bus 00-05] on node 0 link 1
243[ 0.641170] bus: 00 [io 0x0000-0xffff]
244[ 0.641172] bus: 00 [mem 0xf0000000-0xffffffff]
245[ 0.641173] bus: 00 [mem 0x160000000-0xfcffffffff]
246[ 0.641279] ACPI: bus type PCI registered
247[ 0.645371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652046] PCI: Using configuration type 1 for base access
249[ 0.657702] PCI: Using configuration type 1 for extended access
250[ 0.664319] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670679] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676502] mtrr: corrected configuration.
253[ 0.693190] ACPI: Added _OSI(Module Device)
Raptor Engineering Automated Test Standc7a0c882015-04-25 20:16:48 +0000[diff] [blame]254[ 0.697490] ACPI: Added _OSI(Processor Device)
Raptor Engineering Automated Test Standf8281e92015-04-25 20:31:14 +0000[diff] [blame]255[ 0.702014] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706788] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715692] ACPI: Interpreter enabled
258[ 0.719440] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.728913] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738369] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
Raptor Engineering Automated Test Stand62ebf5a2015-04-25 11:15:58 +0000[diff] [blame]261[ 0.747817] ACPI: (supports S0 S1 S5)
Raptor Engineering Automated Test Standf8281e92015-04-25 20:31:14 +0000[diff] [blame]262[ 0.751550] ACPI: Using IOAPIC for interrupt routing
263[ 0.756644] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785157] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791427] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.799751] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.836285] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.846410] PCI host bridge to bus 0000:00
269[ 0.850579] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.856144] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.862399] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.869351] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.876301] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.882567] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.882764] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.882771] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.882902] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.882910] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.882935] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.882943] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.882985] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.883086] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.883100] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.883129] pci 0000:00:02.0: supports D1 D2
285[ 0.883158] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.883221] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.889024] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.889037] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.889078] pci 0000:00:02.1: supports D1 D2
290[ 0.889097] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.889169] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.894975] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.895001] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.895029] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.902256] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.908873] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.916116] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.922847] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.922859] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.922864] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.922868] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.922873] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.922877] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.922882] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.923030] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.923040] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.923044] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.923049] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.923053] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.923058] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.923063] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.923223] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.923322] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.929112] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.929162] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.929211] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.935007] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.935063] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.935118] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.940924] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.940974] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.941022] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.946815] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.946864] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.946921] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.952735] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.952911] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.953019] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.953138] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.953280] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.953422] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.953553] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.953703] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.953831] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.954011] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.954211] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.954235] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.954244] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.954251] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.954289] pci 0000:01:04.0: supports D1 D2
341[ 0.954407] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.959470] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.959474] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.959477] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.959596] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.959636] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.959671] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
348[ 0.959759] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.959850] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.969986] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.975044] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.975154] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.975188] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.975294] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.975404] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.985536] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.990587] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.990661] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.995789] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.000865] pci_bus 0000:00: on NUMA node 0
361[ 1.000965] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.007389] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.013811] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.021475] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.029151] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.036803] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.044462] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.050878] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.057322] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.064966] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.072638] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.080295] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.086737] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.093151] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.100813] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.108478] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.116145] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.125267] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.131989] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.138707] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.145411] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.152411] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.157678] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.163466] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.171665] vgaarb: loaded
386[ 1.174459] vgaarb: bridge control possible 0000:01:04.0
387[ 1.180028] PCI: Using ACPI for IRQ routing
388[ 1.184309] PCI: pci_cache_line_size set to 64 bytes
389[ 1.184366] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.184369] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
391[ 1.184682] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.191819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.197102] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.205845] Switched to clocksource hpet
395[ 1.221344] pnp: PnP ACPI init
396[ 1.224561] ACPI: bus type PNP registered
397[ 1.229199] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.229279] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.229378] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.229456] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.229497] pnp 00:04: [dma 2]
402[ 1.229539] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.229561] pnp: PnP ACPI: found 5 devices
404[ 1.233762] ACPI: bus type PNP unregistered
405[ 1.245843] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
406[ 1.255910] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.260959] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.267138] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.274008] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.281347] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.288689] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.293737] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.300606] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.305650] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.312519] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.317565] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.322608] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.322611] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.322614] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.322617] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.322620] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.322622] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.322625] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.322628] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.322631] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.322774] NET: Registered protocol family 2
427[ 1.327720] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.335538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.342953] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.349641] TCP: reno registered
431[ 1.352958] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.359234] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.366093] NET: Registered protocol family 1
434[ 1.370936] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.377159] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.383145] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.388754] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.394338] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.399977] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.405593] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.411190] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.416848] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.422444] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.428033] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.433679] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.439281] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.444870] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.450519] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.456118] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.456127] PCI: CLS 64 bytes, default 64
451[ 1.456236] Unpacking initramfs...
452[ 1.689423] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.697419] PCI-DMA: Disabling AGP.
454[ 1.702618] PCI-DMA: aperture base @ d4000000 size 65536 KB
455[ 1.708298] PCI-DMA: using GART IOMMU.
456[ 1.712137] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.724248] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.732597] microcode: CPU0: patch_level=0x01000096
459[ 1.737599] microcode: CPU1: patch_level=0x01000096
460[ 1.742605] microcode: CPU2: patch_level=0x01000096
461[ 1.747610] microcode: CPU3: patch_level=0x01000096
462[ 1.752623] microcode: CPU4: patch_level=0x01000096
463[ 1.757618] microcode: CPU5: patch_level=0x01000096
464[ 1.762621] microcode: CPU6: patch_level=0x01000096
465[ 1.768721] microcode: CPU7: patch_level=0x01000096
466[ 1.773812] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.782752] LVT offset 1 assigned for vector 0x400
468[ 1.787646] IBS: LVT offset 1 assigned
469[ 1.791526] perf: AMD IBS detected (0x00000007)
470[ 1.796761] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.803252] audit: initializing netlink subsys (disabled)
472[ 1.808763] audit: type=2000 audit(1429993837.616:1): initialized
473[ 1.815667] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.822202] zbud: loaded
475[ 1.825148] VFS: Disk quotas dquot_6.5.2
476[ 1.829212] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.835868] msgmni has been set to 9941
478[ 1.840333] alg: No test for stdrng (krng)
479[ 1.844627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.852273] io scheduler noop registered
481[ 1.856295] io scheduler deadline registered
482[ 1.860729] io scheduler cfq registered (default)
483[ 1.865738] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.865866] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.865999] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.866112] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.866261] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.866289] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.866315] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.866340] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.866361] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.873456] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.880069] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.880079] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.887126] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.893736] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.893747] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.900788] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.900800] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.907841] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.907870] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.913562] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.920385] GHES: HEST is not enabled!
504[ 1.924351] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.951129] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.978919] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.986949] Linux agpgart interface v0.103
508[ 1.991356] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.001731] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.006837] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.012161] mousedev: PS/2 mouse device common for all mice
512[ 2.017965] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.023164] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.029663] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.037618] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.043891] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.050413] AMD IOMMUv2 functionality not available on this system
518[ 2.056815] TCP: cubic registered
519[ 2.060361] NET: Registered protocol family 10
520[ 2.065347] mip6: Mobile IPv6
521[ 2.068424] NET: Registered protocol family 17
522[ 2.073015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.081795] mpls_gso: MPLS GSO support
524[ 2.086555] registered taskstats version 1
525[ 2.091477] rtc_cmos rtc_cmos: setting system clock to 2015-04-25 20:30:39 UTC (1429993839)
526[ 2.100058] PM: Hibernation image not present or could not be loaded.
527[ 2.101878] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.109890] Write protecting the kernel read-only data: 8192k
529[ 2.119227] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.127969] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.147953] systemd-udevd[99]: starting version 215
532[ 2.153475] random: systemd-udevd urandom read with 3 bits of entropy available
533[ 2.176561] ACPI: bus type USB registered
534[ 2.176619] pps_core: LinuxPPS API ver. 1 registered
535[ 2.176621] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.195177] usbcore: registered new interface driver usbfs
537[ 2.200912] usbcore: registered new interface driver hub
538[ 2.200996] PTP clock support registered
539[ 2.210526] usbcore: registered new device driver usb
540[ 2.216114] tg3.c:v3.137 (May 11, 2014)
541[ 2.220201] tg3 0000:02:00.0: enabling device (0004 -> 0006)
542[ 2.226095] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
543[ 2.226280] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
544[ 2.239246] ehci-pci: EHCI PCI platform driver
545[ 2.244068] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.244170] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.244188] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.244206] ehci-pci 0000:00:02.1: debug port 1
549[ 2.244252] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.244278] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.253507] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.253579] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.253581] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.253582] usb usb1: Product: EHCI Host Controller
555[ 2.253583] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.253585] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.253809] hub 1-0:1.0: USB hub found
558[ 2.253818] hub 1-0:1.0: 10 ports detected
559[ 2.317879] ohci-pci: OHCI PCI platform driver
560[ 2.322678] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.328377] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.335926] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.368656] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.379108] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.388969] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.396905] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.399523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
568[ 2.399525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
569[ 2.399526] usb usb2: Product: OHCI PCI host controller
570[ 2.399527] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
571[ 2.399529] usb usb2: SerialNumber: 0000:00:02.0
572[ 2.399822] hub 2-0:1.0: USB hub found
573[ 2.399835] hub 2-0:1.0: 10 ports detected
574[ 2.442110] tg3 0000:03:00.0: enabling device (0004 -> 0006)
575[ 2.448058] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.497718] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.508119] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.517980] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.525919] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.539217] FS-Cache: Loaded
581[ 2.546437] RPC: Registered named UNIX socket transport module.
582[ 2.553104] RPC: Registered udp transport module.
583[ 2.559167] RPC: Registered tcp transport module.
584[ 2.565249] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.577685] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.591807] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.637482] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.721342] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.725086] Switched to clocksource tsc
590[ 4.254792] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.261468] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.268458] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 6.156326] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 6.170485] systemd[1]: Detected architecture 'x86-64'.
595[ 6.388820] random: nonblocking pool is initialized
596[ 6.408314] systemd[1]: Inserted module 'autofs4'
597[ 6.415120] systemd[1]: Set hostname to <cb-test-tgt>.
598[ 6.748152] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 6.761044] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 6.776421] systemd[1]: Expecting device dev-ttyS0.device...
601[ 6.792083] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 6.800087] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 6.807802] systemd[1]: Starting Remote File Systems (Pre).
604[ 6.824046] systemd[1]: Reached target Remote File Systems (Pre).
605[ 6.830402] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
606[ 6.852031] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
607[ 6.861674] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 6.869909] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 6.877953] systemd[1]: Starting Paths.
610[ 6.891951] systemd[1]: Reached target Paths.
611[ 6.896475] systemd[1]: Starting Encrypted Volumes.
612[ 6.911935] systemd[1]: Reached target Encrypted Volumes.
613[ 6.917467] systemd[1]: Starting Swap.
614[ 6.931915] systemd[1]: Reached target Swap.
615[ 6.936315] systemd[1]: Starting Root Slice.
616[ 6.959913] systemd[1]: Created slice Root Slice.
617[ 6.964830] systemd[1]: Starting User and Session Slice.
618[ 6.979945] systemd[1]: Created slice User and Session Slice.
619[ 6.986027] systemd[1]: Starting Delayed Shutdown Socket.
620[ 7.003933] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 7.009949] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 7.027900] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 7.035035] systemd[1]: Starting Journal Socket (/dev/log).
624[ 7.051883] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 7.057957] systemd[1]: Starting Syslog Socket.
626[ 7.071882] systemd[1]: Listening on Syslog Socket.
627[ 7.078018] systemd[1]: Starting udev Kernel Socket.
628[ 7.091897] systemd[1]: Listening on udev Kernel Socket.
629[ 7.097385] systemd[1]: Starting udev Control Socket.
630[ 7.111849] systemd[1]: Listening on udev Control Socket.
631[ 7.117367] systemd[1]: Starting Journal Socket.
632[ 7.131842] systemd[1]: Listening on Journal Socket.
633[ 7.136982] systemd[1]: Starting Sockets.
634[ 7.151833] systemd[1]: Reached target Sockets.
635[ 7.156493] systemd[1]: Starting System Slice.
636[ 7.171834] systemd[1]: Created slice System Slice.
637[ 7.176847] systemd[1]: Starting system-getty.slice.
638[ 7.191835] systemd[1]: Created slice system-getty.slice.
639[ 7.197384] systemd[1]: Starting system-serial\x2dgetty.slice.
640[ 7.215826] systemd[1]: Created slice system-serial\x2dgetty.slice.
641[ 7.222879] systemd[1]: Starting Create list of required static device nodes for the current kernel...
642[ 7.245093] systemd[1]: Mounting Debug File System...
643[ 7.281018] systemd[1]: Started Set Up Additional Binary Formats.
644[ 7.287282] systemd[1]: Mounting Huge Pages File System...
645[ 7.331624] systemd[1]: Starting Load Kernel Modules...
646[ 7.348844] systemd[1]: Mounting POSIX Message Queue File System...
647[ 7.365874] systemd[1]: Starting udev Coldplug all Devices...
648[ 7.381189] systemd[1]: Starting Journal Service...
649[ 7.407774] systemd[1]: Started Journal Service.
650[ 8.060021] systemd-udevd[187]: starting version 215
651[ 8.346984] systemd-journald[168]: Received request to flush runtime journal from PID 1
652[ 11.012377] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
653[ 11.020285] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
654[ 11.030388] EDAC MC: Ver: 3.0.0
655[ 11.036886] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
656[ 11.045375] ACPI: Power Button [PWRB]
657[ 11.049288] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
658[ 11.049498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
659[ 11.063600] ACPI: Power Button [PWRF]
660[ 11.087981] MCE: In-kernel MCE decoding enabled.
661[ 11.092995] SCSI subsystem initialized
662[ 11.346305] FDC 0 is a post-1991 82077
663[ 11.364333] AMD64 EDAC driver v3.4.0
664[ 11.368284] EDAC amd64: DRAM ECC enabled.
665[ 11.372451] EDAC amd64: F10h detected (node 0).
666[ 11.377138] EDAC MC: DCT0 chip selects:
667[ 11.377141] EDAC amd64: MC: 0: 0MB 1: 0MB
668[ 11.377415] acpi-cpufreq: overriding BIOS provided _PSD data
669[ 11.379096] libata version 3.00 loaded.
670[ 11.387721] EDAC amd64: MC: 2: 0MB 3: 0MB
671[ 11.392541] EDAC amd64: MC: 4: 0MB 5: 0MB
672[ 11.397372] EDAC amd64: MC: 6: 1024MB 7: 1024MB
673[ 11.402195] EDAC MC: DCT1 chip selects:
674[ 11.402197] EDAC amd64: MC: 0: 0MB 1: 0MB
675[ 11.407028] EDAC amd64: MC: 2: 0MB 3: 0MB
676[ 11.411838] EDAC amd64: MC: 4: 0MB 5: 0MB
677[ 11.416638] EDAC amd64: MC: 6: 1024MB 7: 1024MB
678[ 11.421438] EDAC amd64: using x4 syndromes.
679[ 11.425742] EDAC amd64: MCT channel count: 2
680[ 11.426166] input: PC Speaker as /devices/platform/pcspkr/input/input4
681[ 11.436809] EDAC amd64: CS6: Registered DDR2 RAM
682[ 11.441568] EDAC amd64: CS7: Registered DDR2 RAM
683[ 11.446641] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
684[ 11.456617] EDAC amd64: DRAM ECC enabled.
685[ 11.460867] EDAC amd64: F10h detected (node 1).
686[ 11.465594] EDAC MC: DCT0 chip selects:
687[ 11.465597] EDAC amd64: MC: 0: 1024MB 1: 0MB
688[ 11.470440] EDAC amd64: MC: 2: 0MB 3: 0MB
689[ 11.475257] EDAC amd64: MC: 4: 0MB 5: 0MB
690[ 11.480065] EDAC amd64: MC: 6: 0MB 7: 0MB
691[ 11.484884] EDAC MC: DCT1 chip selects:
692[ 11.484886] EDAC amd64: MC: 0: 0MB 1: 0MB
693[ 11.489676] EDAC amd64: MC: 2: 0MB 3: 0MB
694[ 11.494485] EDAC amd64: MC: 4: 0MB 5: 0MB
695[ 11.499321] EDAC amd64: MC: 6: 0MB 7: 0MB
696[ 11.504172] EDAC amd64: using x4 syndromes.
697[ 11.508486] EDAC amd64: MCT channel count: 1
698[ 11.513014] EDAC amd64: CS0: Registered DDR2 RAM
699[ 11.518105] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
700[ 11.528097] sata_nv 0000:00:07.0: version 3.5
701[ 11.528129] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
702[ 11.528376] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
703[ 11.528984] scsi0 : sata_nv
704[ 11.548123] scsi1 : sata_nv
705[ 11.551201] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
706[ 11.558437] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
707[ 11.565958] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
708[ 11.572360] scsi2 : sata_nv
709[ 11.575439] scsi3 : sata_nv
710[ 11.578409] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
711[ 11.585640] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
712[ 11.592936] pata_amd 0000:00:06.0: version 0.4.1
713[ 11.593745] scsi4 : pata_amd
714[ 11.597029] scsi5 : pata_amd
715[ 11.600116] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
716[ 11.607209] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
717[ 11.692214] kvm: Nested Virtualization enabled
718[ 11.696760] kvm: Nested Paging enabled
719[ 11.862287] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
720[ 11.869416] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
721[ 11.874691] ata1: SATA link down (SStatus 0 SControl 300)
722[ 11.902167] ata3: SATA link down (SStatus 0 SControl 300)
723[ 12.190076] ata2: SATA link down (SStatus 0 SControl 300)
724[ 12.505969] ata4: SATA link down (SStatus 0 SControl 300)
725[ 15.105056] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0