Idwer Vollering | c36a170 | 2017-09-04 13:50:11 +0200 | [diff] [blame] | 1 | Copyright (c) 1992-2017 The FreeBSD Project. |
| 2 | Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 |
| 3 | The Regents of the University of California. All rights reserved. |
| 4 | FreeBSD is a registered trademark of The FreeBSD Foundation. |
| 5 | FreeBSD 12.0-CURRENT #16 r323084M: Fri Sep 1 12:00:14 CEST 2017 |
| 6 | root@6L250S0:/usr/obj/usr/src/sys/GENERIC amd64 |
| 7 | FreeBSD clang version 5.0.0 (branches/release_50 311606) (based on LLVM 5.0.0svn) |
| 8 | WARNING: WITNESS option enabled, expect reduced performance. |
| 9 | VT(vga): resolution 640x480 |
| 10 | CPU: AMD A8-5500 APU with Radeon(tm) HD Graphics (3194.25-MHz K8-class CPU) |
| 11 | Origin="AuthenticAMD" Id=0x610f01 Family=0x15 Model=0x10 Stepping=1 |
| 12 | Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> |
| 13 | Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> |
| 14 | AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> |
| 15 | AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> |
| 16 | Structured Extended Features=0x8<BMI1> |
| 17 | SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 |
| 18 | TSC: P-state invariant, performance statistics |
| 19 | real memory = 9110028288 (8688 MB) |
| 20 | avail memory = 7697235968 (7340 MB) |
| 21 | Event timer "LAPIC" quality 100 |
| 22 | ACPI APIC Table: <CORE COREBOOT> |
| 23 | FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs |
| 24 | FreeBSD/SMP: 1 package(s) x 4 core(s) |
| 25 | random: unblocking device. |
| 26 | ioapic0 <Version 2.1> irqs 0-23 on motherboard |
| 27 | SMP: AP CPU #3 Launched! |
| 28 | SMP: AP CPU #1 Launched! |
| 29 | SMP: AP CPU #2 Launched! |
| 30 | Timecounter "TSC-low" frequency 1597124484 Hz quality 1000 |
| 31 | random: entropy device external interface |
| 32 | netmap: loaded module |
| 33 | [ath_hal] loaded |
| 34 | module_register_init: MOD_LOAD (vesa, 0xffffffff80f6d6a0, 0) error 19 |
| 35 | kbd1 at kbdmux0 |
| 36 | nexus0 |
| 37 | vtvga0: <VT VGA driver> on motherboard |
| 38 | cryptosoft0: <software crypto> on motherboard |
| 39 | acpi0: <CORE COREBOOT> on motherboard |
| 40 | acpi0: Power Button (fixed) |
| 41 | cpu0: <ACPI CPU> on acpi0 |
| 42 | cpu1: <ACPI CPU> on acpi0 |
| 43 | cpu2: <ACPI CPU> on acpi0 |
| 44 | cpu3: <ACPI CPU> on acpi0 |
| 45 | atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 |
| 46 | atrtc0: registered as a time-of-day clock, resolution 1.000000s |
| 47 | Event timer "RTC" frequency 32768 Hz quality 0 |
| 48 | attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 |
| 49 | Timecounter "i8254" frequency 1193182 Hz quality 0 |
| 50 | Event timer "i8254" frequency 1193182 Hz quality 100 |
| 51 | hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 |
| 52 | Timecounter "HPET" frequency 14318180 Hz quality 950 |
| 53 | Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 |
| 54 | acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0 |
| 55 | acpi_button0: <Power Button> on acpi0 |
| 56 | pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 |
| 57 | pci0: <ACPI PCI bus> on pcib0 |
| 58 | pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) |
| 59 | vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe0000000-0xefffffff,0xf0180000-0xf01bffff at device 1.0 on pci0 |
| 60 | vgapci0: Boot video device |
| 61 | hdac0: <ATI (0x9902) HDA Controller> mem 0xf01c0000-0xf01c3fff at device 1.1 on pci0 |
| 62 | hdac0: hdac_get_capabilities: Invalid corb size (0) |
| 63 | device_attach: hdac0 attach returned 6 |
| 64 | xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf01c8000-0xf01c9fff at device 16.0 on pci0 |
| 65 | xhci0: 32 bytes context size, 64-bit DMA |
| 66 | xhci0: Unable to map MSI-X table |
| 67 | usbus0 on xhci0 |
| 68 | usbus0: 5.0Gbps Super Speed USB v3.0 |
| 69 | xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf01ca000-0xf01cbfff at device 16.1 on pci0 |
| 70 | xhci1: 32 bytes context size, 64-bit DMA |
| 71 | xhci1: Unable to map MSI-X table |
| 72 | usbus1 on xhci1 |
| 73 | usbus1: 5.0Gbps Super Speed USB v3.0 |
| 74 | ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x2410-0x2417,0x2420-0x2423,0x2418-0x241f,0x2424-0x2427,0x2400-0x240f mem 0xf01cf000-0xf01cf7ff at device 17.0 on pci0 |
| 75 | ahci0: AHCI v1.30 with 8 6Gbps ports, Port Multiplier not supported |
| 76 | ahcich0: <AHCI channel> at channel 0 on ahci0 |
| 77 | ahcich1: <AHCI channel> at channel 1 on ahci0 |
| 78 | ahcich2: <AHCI channel> at channel 2 on ahci0 |
| 79 | ahcich3: <AHCI channel> at channel 3 on ahci0 |
| 80 | ahcich4: <AHCI channel> at channel 4 on ahci0 |
| 81 | ahcich5: <AHCI channel> at channel 5 on ahci0 |
| 82 | ahcich6: <AHCI channel> at channel 6 on ahci0 |
| 83 | ahcich7: <AHCI channel> at channel 7 on ahci0 |
| 84 | ohci0: <AMD FCH USB Controller> mem 0xf01cc000-0xf01ccfff at device 18.0 on pci0 |
| 85 | usbus2 on ohci0 |
| 86 | usbus2: 12Mbps Full Speed USB v1.0 |
| 87 | ehci0: <AMD FCH USB 2.0 controller> mem 0xf01d0000-0xf01d00ff at device 18.2 on pci0 |
| 88 | usbus3: EHCI version 1.0 |
| 89 | usbus3 on ehci0 |
| 90 | usbus3: 480Mbps High Speed USB v2.0 |
| 91 | ohci1: <AMD FCH USB Controller> mem 0xf01cd000-0xf01cdfff at device 19.0 on pci0 |
| 92 | usbus4 on ohci1 |
| 93 | usbus4: 12Mbps Full Speed USB v1.0 |
| 94 | ehci1: <AMD FCH USB 2.0 controller> mem 0xf01d1000-0xf01d10ff at device 19.2 on pci0 |
| 95 | usbus5: EHCI version 1.0 |
| 96 | usbus5 on ehci1 |
| 97 | usbus5: 480Mbps High Speed USB v2.0 |
| 98 | hdac0: <AMD Hudson-2 HDA Controller> mem 0xf01c4000-0xf01c7fff at device 20.2 on pci0 |
| 99 | isab0: <PCI-ISA bridge> at device 20.3 on pci0 |
| 100 | isa0: <ISA bus> on isab0 |
| 101 | pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0 |
| 102 | pci1: <ACPI PCI bus> on pcib1 |
| 103 | ohci2: <OHCI (generic) USB controller> mem 0xf01ce000-0xf01cefff at device 20.5 on pci0 |
| 104 | usbus6 on ohci2 |
| 105 | usbus6: 12Mbps Full Speed USB v1.0 |
| 106 | pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0 |
| 107 | pci2: <ACPI PCI bus> on pcib2 |
| 108 | pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0 |
| 109 | pcib3: failed to allocate initial I/O port window: 0x1000-0x1fff |
| 110 | pci3: <ACPI PCI bus> on pcib3 |
| 111 | re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff at device 0.0 on pci3 |
| 112 | re0: Using 1 MSI-X message |
| 113 | re0: turning off MSI enable bit. |
| 114 | re0: Chip rev. 0x48000000 |
| 115 | re0: MAC rev. 0x00000000 |
| 116 | miibus0: <MII bus> on re0 |
| 117 | rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 |
| 118 | rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow |
| 119 | re0: Using defaults for TSO: 65518/35/2048 |
| 120 | re0: Ethernet address: <snip> |
| 121 | re0: netmap queues/slots: TX 1/256, RX 1/256 |
| 122 | orm0: <ISA Option ROM> at iomem 0xee800-0xeffff on isa0 |
| 123 | atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 |
| 124 | atkbd0: <AT Keyboard> irq 1 on atkbdc0 |
| 125 | kbd0 at atkbd0 |
| 126 | atkbd0: [GIANT-LOCKED] |
| 127 | ppc0: cannot reserve I/O port range |
| 128 | uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 |
| 129 | uart0: console (115200,n,8,1) |
| 130 | hwpstate0: <Cool`n'Quiet 2.0> on cpu0 |
| 131 | ZFS filesystem version: 5 |
| 132 | ZFS storage pool version: features support (5000) |
| 133 | Timecounters tick every 1.000 msec |
| 134 | hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 |
| 135 | hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 |
| 136 | pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 |
| 137 | pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 |
| 138 | pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0 |
| 139 | pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0 |
| 140 | ugen1.1: <0x1022 XHCI root HUB> at usbus1 |
| 141 | ugen4.1: <AMD OHCI root HUB> at usbus4 |
| 142 | ugen0.1: <0x1022 XHCI root HUB> at usbus0 |
| 143 | ugen6.1: <AMD OHCI root HUB> at usbus6 |
| 144 | uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 |
| 145 | ugen3.1: <AMD EHCI root HUB> at usbus3 |
| 146 | uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 |
| 147 | uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 |
| 148 | ugen5.1: <AMD EHCI root HUB> at usbus5 |
| 149 | uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 |
| 150 | uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 |
| 151 | uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 |
| 152 | ugen2.1: <AMD OHCI root HUB> at usbus2 |
| 153 | uhub6: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 |
| 154 | ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 |
| 155 | ada0: <Maxtor 6L250S0 BANC1E00> ATA-7 SATA 1.x device |
| 156 | ada0: Serial Number L5945QVH |
| 157 | ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) |
| 158 | ada0: Command Queueing enabled |
| 159 | ada0: 239372MB (490234752 512 byte sectors) |
| 160 | WARNING: WITNESS option enabled, expect reduced performance. |
| 161 | Trying to mount root from zfs:Maxtor_6L250S0/ROOT/default []... |
| 162 | Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 |
| 163 | uhub4: 2 ports with 2 removable, self powered |
| 164 | uhub1: 5 ports with 5 removable, self powered |
| 165 | uhub6: 5 ports with 5 removable, self powered |
| 166 | uhub2: 4 ports with 4 removable, self powered |
| 167 | uhub0: 4 ports with 4 removable, self powered |
| 168 | ugen1.2: <Realtek 802.11n NIC> at usbus1 |
| 169 | rtwn0 on uhub0 |
| 170 | rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 1> on usbus1 |
| 171 | rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R |
| 172 | Root mount waiting for: usbus5 usbus3 |
| 173 | uhub3: 5 ports with 5 removable, self powered |
| 174 | uhub5: 5 ports with 5 removable, self powered |
| 175 | wlan1: Ethernet address: <snip> |
| 176 | re0: link state changed to DOWN |
| 177 | wlan1: link state changed to UP |