Vladimir Serbinenko | 5ede08e | 2014-01-26 18:09:25 +0100 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Linux version 3.8.0-21-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 (Ubuntu 3.8.0-21.32-generic 3.8.8) |
| 4 | [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=03d4f0d9-2880-48e2-a0fc-0591c740aa45 ro |
| 5 | [ 0.000000] KERNEL supported cpus: |
| 6 | [ 0.000000] Intel GenuineIntel |
| 7 | [ 0.000000] AMD AuthenticAMD |
| 8 | [ 0.000000] Centaur CentaurHauls |
| 9 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| 11 | [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| 12 | [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000003ffcffff] usable |
| 13 | [ 0.000000] BIOS-e820: [mem 0x000000003ffd0000-0x000000003fffffff] type 16 |
| 14 | [ 0.000000] NX (Execute Disable) protection: active |
| 15 | [ 0.000000] SMBIOS 2.7 present. |
| 16 | [ 0.000000] DMI: ASUS A8N-E, BIOS 4.0-5356-g63e35f2 01/26/2014 |
| 17 | [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved |
| 18 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 19 | [ 0.000000] No AGP bridge found |
| 20 | [ 0.000000] e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x400000000 |
| 21 | [ 0.000000] MTRR default type: uncachable |
| 22 | [ 0.000000] MTRR fixed ranges enabled: |
| 23 | [ 0.000000] 00000-9FFFF write-back |
| 24 | [ 0.000000] A0000-BFFFF uncachable |
| 25 | [ 0.000000] C0000-FFFFF write-back |
| 26 | [ 0.000000] MTRR variable ranges enabled: |
| 27 | [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back |
| 28 | [ 0.000000] 1 disabled |
| 29 | [ 0.000000] 2 disabled |
| 30 | [ 0.000000] 3 disabled |
| 31 | [ 0.000000] 4 disabled |
| 32 | [ 0.000000] 5 disabled |
| 33 | [ 0.000000] 6 disabled |
| 34 | [ 0.000000] 7 disabled |
| 35 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 36 | [ 0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [ffff8800000f0400] |
| 37 | [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] |
| 38 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 39 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x3ffcffff] |
| 40 | [ 0.000000] [mem 0x00000000-0x3fdfffff] page 2M |
| 41 | [ 0.000000] [mem 0x3fe00000-0x3ffcffff] page 4k |
| 42 | [ 0.000000] kernel direct mapping tables up to 0x3ffcffff @ [mem 0x1fffd000-0x1fffffff] |
| 43 | [ 0.000000] RAMDISK: [mem 0x35fea000-0x36fecfff] |
| 44 | [ 0.000000] ACPI: RSDP 00000000000f0800 00014 (v00 CORE ) |
| 45 | [ 0.000000] ACPI: RSDT 000000003ffe2630 00040 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 46 | [ 0.000000] ACPI: FACP 000000003ffe3e10 00074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 47 | [ 0.000000] ACPI: DSDT 000000003ffe2740 016CC (v01 CORE CB-DSDT 00000001 INTL 20131218) |
| 48 | [ 0.000000] ACPI: FACS 000000003ffe2700 00040 |
| 49 | [ 0.000000] ACPI: MCFG 000000003ffe3f10 0002C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 50 | [ 0.000000] ACPI: HPET 000000003ffe3f40 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 51 | [ 0.000000] ACPI: APIC 000000003ffe3f80 0005A (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 52 | [ 0.000000] ACPI: SRAT 000000003ffe3fe0 00090 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 53 | [ 0.000000] ACPI: SLIT 000000003ffe4070 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 54 | [ 0.000000] ACPI: SSDT 000000003ffe40a0 00166 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 55 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 56 | [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| 57 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| 58 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x3fffffff] |
| 59 | [ 0.000000] NUMA: Initialized distance table, cnt=1 |
| 60 | [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x3ffcffff] -> [mem 0x00000000-0x3ffcffff] |
| 61 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffcffff] |
| 62 | [ 0.000000] NODE_DATA [mem 0x3ffca000-0x3ffcefff] |
| 63 | [ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0 |
| 64 | [ 0.000000] Zone ranges: |
| 65 | [ 0.000000] DMA [mem 0x00010000-0x00ffffff] |
| 66 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 67 | [ 0.000000] Normal empty |
| 68 | [ 0.000000] Movable zone start for each node |
| 69 | [ 0.000000] Early memory node ranges |
| 70 | [ 0.000000] node 0: [mem 0x00010000-0x0009ffff] |
| 71 | [ 0.000000] node 0: [mem 0x00100000-0x3ffcffff] |
| 72 | [ 0.000000] On node 0 totalpages: 261984 |
| 73 | [ 0.000000] DMA zone: 64 pages used for memmap |
| 74 | [ 0.000000] DMA zone: 7 pages reserved |
| 75 | [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 |
| 76 | [ 0.000000] DMA32 zone: 4032 pages used for memmap |
| 77 | [ 0.000000] DMA32 zone: 253968 pages, LIFO batch:31 |
| 78 | [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 |
| 79 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 80 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 81 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 82 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 83 | [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| 84 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 85 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| 86 | [ 0.000000] ACPI: IRQ0 used by override. |
| 87 | [ 0.000000] ACPI: IRQ2 used by override. |
| 88 | [ 0.000000] ACPI: IRQ9 used by override. |
| 89 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 90 | [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| 91 | [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs |
| 92 | [ 0.000000] nr_irqs_gsi: 40 |
| 93 | [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 |
| 94 | [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 |
| 95 | [ 0.000000] e820: [mem 0x40000000-0xffffffff] available for PCI devices |
| 96 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 97 | [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 |
| 98 | [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s85056 r8192 d21440 u2097152 |
| 99 | [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u2097152 alloc=1*2097152 |
| 100 | [ 0.000000] pcpu-alloc: [0] 0 |
| 101 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257881 |
| 102 | [ 0.000000] Policy zone: DMA32 |
| 103 | [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=03d4f0d9-2880-48e2-a0fc-0591c740aa45 ro |
| 104 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 105 | [ 0.000000] __ex_table already sorted, skipping sort |
| 106 | [ 0.000000] Checking aperture... |
| 107 | [ 0.000000] No AGP bridge found |
| 108 | [ 0.000000] Node 0: aperture @ f8000000 size 64 MB |
| 109 | [ 0.000000] Memory: 999224k/1048384k available (7006k kernel code, 448k absent, 48712k reserved, 6238k data, 992k init) |
| 110 | [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 |
| 111 | [ 0.000000] Hierarchical RCU implementation. |
| 112 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 113 | [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. |
| 114 | [ 0.000000] NR_IRQS:16640 nr_irqs:256 16 |
| 115 | [ 0.000000] Console: colour dummy device 80x25 |
| 116 | [ 0.000000] console [tty0] enabled |
| 117 | [ 0.000000] allocated 4194304 bytes of page_cgroup |
| 118 | [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| 119 | [ 0.000000] hpet clockevent registered |
| 120 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 121 | [ 0.000000] tsc: Detected 2010.140 MHz processor |
| 122 | [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.28 BogoMIPS (lpj=8040560) |
| 123 | [ 0.004016] pid_max: default: 32768 minimum: 301 |
| 124 | [ 0.004061] Security Framework initialized |
| 125 | [ 0.004089] AppArmor: AppArmor initialized |
| 126 | [ 0.004093] Yama: becoming mindful. |
| 127 | [ 0.004296] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| 128 | [ 0.005466] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) |
| 129 | [ 0.006039] Mount-cache hash table entries: 256 |
| 130 | [ 0.008017] spurious 8259A interrupt: IRQ7. |
| 131 | [ 0.008070] Initializing cgroup subsys cpuacct |
| 132 | [ 0.008078] Initializing cgroup subsys memory |
| 133 | [ 0.008098] Initializing cgroup subsys devices |
| 134 | [ 0.008104] Initializing cgroup subsys freezer |
| 135 | [ 0.008110] Initializing cgroup subsys blkio |
| 136 | [ 0.008115] Initializing cgroup subsys perf_event |
| 137 | [ 0.008123] Initializing cgroup subsys hugetlb |
| 138 | [ 0.008165] tseg: 0000000000 |
| 139 | [ 0.008189] mce: CPU supports 5 MCE banks |
| 140 | [ 0.008211] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| 141 | [ 0.008211] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| 142 | [ 0.008211] tlb_flushall_shift: 4 |
| 143 | [ 0.015616] Freeing SMP alternatives: 24k freed |
| 144 | [ 0.017840] ACPI: Core revision 20121018 |
| 145 | [ 0.018746] ftrace: allocating 26690 entries in 105 pages |
| 146 | [ 0.036384] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 147 | [ 0.040000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC |
| 148 | [ 0.040000] ...trying to set up timer (IRQ0) through the 8259A ... |
| 149 | [ 0.040000] ..... (found apic 0 pin 0) ... |
| 150 | [ 0.079782] ....... works. |
| 151 | [ 0.079786] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 1f, stepping: 00) |
| 152 | [ 0.080000] Performance Events: AMD PMU driver. |
| 153 | [ 0.080000] ... version: 0 |
| 154 | [ 0.080000] ... bit width: 48 |
| 155 | [ 0.080000] ... generic registers: 4 |
| 156 | [ 0.080000] ... value mask: 0000ffffffffffff |
| 157 | [ 0.080000] ... max period: 00007fffffffffff |
| 158 | [ 0.080000] ... fixed-purpose events: 0 |
| 159 | [ 0.080000] ... event mask: 000000000000000f |
| 160 | [ 0.080000] Brought up 1 CPUs |
| 161 | [ 0.080000] smpboot: Total of 1 processors activated (4020.28 BogoMIPS) |
| 162 | [ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 163 | [ 0.080000] devtmpfs: initialized |
| 164 | [ 0.080212] EVM: security.selinux |
| 165 | [ 0.080216] EVM: security.SMACK64 |
| 166 | [ 0.080219] EVM: security.capability |
| 167 | [ 0.081836] regulator-dummy: no parameters |
| 168 | [ 0.081923] NET: Registered protocol family 16 |
| 169 | [ 0.082077] node 0 link 0: io port [1000, 2fff] |
| 170 | [ 0.082080] TOM: 0000000040000000 aka 1024M |
| 171 | [ 0.082087] node 0 link 0: mmio [fc000000, fc1fffff] |
| 172 | [ 0.082092] bus: [bus 00-05] on node 0 link 0 |
| 173 | [ 0.082094] bus: 00 [io 0x0000-0xffff] |
| 174 | [ 0.082096] bus: 00 [mem 0x40000000-0xfcffffffff] |
| 175 | [ 0.082155] ACPI: bus type pci registered |
| 176 | [ 0.082225] PCI: MMCONFIG has no entries |
| 177 | [ 0.082230] PCI: Using configuration type 1 for base access |
| 178 | [ 0.083427] bio: create slab <bio-0> at 0 |
| 179 | [ 0.083571] ACPI: Added _OSI(Module Device) |
| 180 | [ 0.083577] ACPI: Added _OSI(Processor Device) |
| 181 | [ 0.083582] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 182 | [ 0.083588] ACPI: Added _OSI(Processor Aggregator Device) |
| 183 | [ 0.083903] ACPI: EC: Look up EC in DSDT |
| 184 | [ 0.084855] ACPI: Interpreter enabled |
| 185 | [ 0.084863] ACPI: (supports S0 S5) |
| 186 | [ 0.084878] ACPI: Using IOAPIC for interrupt routing |
| 187 | [ 0.084902] PCI: MMCONFIG has no entries |
| 188 | [ 0.086397] ACPI: No dock devices found. |
| 189 | [ 0.086406] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 190 | [ 0.087539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| 191 | [ 0.087547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| 192 | [ 0.089859] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| 193 | [ 0.089903] PCI host bridge to bus 0000:00 |
| 194 | [ 0.089911] pci_bus 0000:00: root bus resource [bus 00-05] |
| 195 | [ 0.089918] pci_bus 0000:00: root bus resource [io 0x0d00-0x2fff] |
| 196 | [ 0.089925] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc1fffff] |
| 197 | [ 0.089933] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 198 | [ 0.089953] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| 199 | [ 0.090030] pci 0000:00:01.0: [10de:0050] type 00 class 0x060100 |
| 200 | [ 0.090037] pci 0000:00:01.0: reg 10: [io 0x2400-0x247f] |
| 201 | [ 0.090069] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| 202 | [ 0.090077] pci 0000:00:01.1: reg 10: [io 0x2800-0x281f] |
| 203 | [ 0.090090] pci 0000:00:01.1: reg 20: [io 0x2480-0x24bf] |
| 204 | [ 0.090095] pci 0000:00:01.1: reg 24: [io 0x24c0-0x24ff] |
| 205 | [ 0.090110] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| 206 | [ 0.090128] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| 207 | [ 0.090136] pci 0000:00:02.0: reg 10: [mem 0xfc100000-0xfc100fff] |
| 208 | [ 0.090162] pci 0000:00:02.0: supports D1 D2 |
| 209 | [ 0.090165] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 210 | [ 0.090179] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| 211 | [ 0.090188] pci 0000:00:02.1: reg 10: [mem 0xfc105000-0xfc1050ff] |
| 212 | [ 0.090219] pci 0000:00:02.1: supports D1 D2 |
| 213 | [ 0.090222] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| 214 | [ 0.090241] pci 0000:00:04.0: [10de:0059] type 00 class 0x040100 |
| 215 | [ 0.090249] pci 0000:00:04.0: reg 10: [io 0x1c00-0x1cff] |
| 216 | [ 0.090254] pci 0000:00:04.0: reg 14: [io 0x2000-0x20ff] |
| 217 | [ 0.090259] pci 0000:00:04.0: reg 18: [mem 0xfc101000-0xfc101fff] |
| 218 | [ 0.090281] pci 0000:00:04.0: supports D1 D2 |
| 219 | [ 0.090293] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| 220 | [ 0.090310] pci 0000:00:06.0: reg 20: [io 0x2820-0x282f] |
| 221 | [ 0.090336] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| 222 | [ 0.090344] pci 0000:00:07.0: reg 10: [io 0x2850-0x2857] |
| 223 | [ 0.090349] pci 0000:00:07.0: reg 14: [io 0x2878-0x287b] |
| 224 | [ 0.090354] pci 0000:00:07.0: reg 18: [io 0x2858-0x285f] |
| 225 | [ 0.090359] pci 0000:00:07.0: reg 1c: [io 0x287c-0x287f] |
| 226 | [ 0.090365] pci 0000:00:07.0: reg 20: [io 0x2830-0x283f] |
| 227 | [ 0.090370] pci 0000:00:07.0: reg 24: [mem 0xfc102000-0xfc102fff] |
| 228 | [ 0.090393] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| 229 | [ 0.090401] pci 0000:00:08.0: reg 10: [io 0x2860-0x2867] |
| 230 | [ 0.090406] pci 0000:00:08.0: reg 14: [io 0x2880-0x2883] |
| 231 | [ 0.090411] pci 0000:00:08.0: reg 18: [io 0x2868-0x286f] |
| 232 | [ 0.090416] pci 0000:00:08.0: reg 1c: [io 0x2884-0x2887] |
| 233 | [ 0.090421] pci 0000:00:08.0: reg 20: [io 0x2840-0x284f] |
| 234 | [ 0.090427] pci 0000:00:08.0: reg 24: [mem 0xfc103000-0xfc103fff] |
| 235 | [ 0.090449] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401 |
| 236 | [ 0.090480] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000 |
| 237 | [ 0.090489] pci 0000:00:0a.0: reg 10: [mem 0xfc104000-0xfc104fff] |
| 238 | [ 0.090494] pci 0000:00:0a.0: reg 14: [io 0x2870-0x2877] |
| 239 | [ 0.090524] pci 0000:00:0a.0: supports D1 D2 |
| 240 | [ 0.090526] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 241 | [ 0.090542] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| 242 | [ 0.090569] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 243 | [ 0.090584] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| 244 | [ 0.090611] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 245 | [ 0.090626] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| 246 | [ 0.090652] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 247 | [ 0.090667] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| 248 | [ 0.090693] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 249 | [ 0.090713] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 |
| 250 | [ 0.090734] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 |
| 251 | [ 0.090752] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 |
| 252 | [ 0.090773] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 |
| 253 | [ 0.090814] pci 0000:01:06.0: [1033:0035] type 00 class 0x0c0310 |
| 254 | [ 0.090826] pci 0000:01:06.0: reg 10: [mem 0xfc000000-0xfc000fff] |
| 255 | [ 0.090868] pci 0000:01:06.0: supports D1 D2 |
| 256 | [ 0.090871] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot |
| 257 | [ 0.090887] pci 0000:01:06.1: [1033:0035] type 00 class 0x0c0310 |
| 258 | [ 0.090898] pci 0000:01:06.1: reg 10: [mem 0xfc001000-0xfc001fff] |
| 259 | [ 0.090940] pci 0000:01:06.1: supports D1 D2 |
| 260 | [ 0.090942] pci 0000:01:06.1: PME# supported from D0 D1 D2 D3hot |
| 261 | [ 0.090958] pci 0000:01:06.2: [1033:00e0] type 00 class 0x0c0320 |
| 262 | [ 0.090969] pci 0000:01:06.2: reg 10: [mem 0xfc002000-0xfc0020ff] |
| 263 | [ 0.091011] pci 0000:01:06.2: supports D1 D2 |
| 264 | [ 0.091014] pci 0000:01:06.2: PME# supported from D0 D1 D2 D3hot |
| 265 | [ 0.091043] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode) |
| 266 | [ 0.091052] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| 267 | [ 0.091057] pci 0000:00:09.0: bridge window [io 0x0d00-0x2fff] (subtractive decode) |
| 268 | [ 0.091060] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc1fffff] (subtractive decode) |
| 269 | [ 0.091062] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| 270 | [ 0.091083] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| 271 | [ 0.091109] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| 272 | [ 0.091135] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| 273 | [ 0.091160] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| 274 | [ 0.091189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT] |
| 275 | [ 0.091215] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM |
| 276 | [ 0.091224] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) |
| 277 | [ 0.092360] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. |
| 278 | [ 0.092438] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. |
| 279 | [ 0.092513] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| 280 | [ 0.092587] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| 281 | [ 0.092661] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| 282 | [ 0.092739] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| 283 | [ 0.092814] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 *21 22 23) |
| 284 | [ 0.092875] ACPI: PCI Interrupt Link [LUEH] (IRQs *20 21 22 23) |
| 285 | [ 0.092944] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 *22 23) |
| 286 | [ 0.093022] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| 287 | [ 0.093096] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| 288 | [ 0.093175] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 *23) |
| 289 | [ 0.093248] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 *22 23) |
| 290 | [ 0.093325] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 *23) |
| 291 | [ 0.093505] vgaarb: loaded |
| 292 | [ 0.093791] SCSI subsystem initialized |
| 293 | [ 0.093797] ACPI: bus type scsi registered |
| 294 | [ 0.093891] libata version 3.00 loaded. |
| 295 | [ 0.093918] ACPI: bus type usb registered |
| 296 | [ 0.093954] usbcore: registered new interface driver usbfs |
| 297 | [ 0.093968] usbcore: registered new interface driver hub |
| 298 | [ 0.094004] usbcore: registered new device driver usb |
| 299 | [ 0.094133] PCI: Using ACPI for IRQ routing |
| 300 | [ 0.094141] PCI: pci_cache_line_size set to 64 bytes |
| 301 | [ 0.094195] e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff] |
| 302 | [ 0.094345] NetLabel: Initializing |
| 303 | [ 0.094351] NetLabel: domain hash size = 128 |
| 304 | [ 0.094355] NetLabel: protocols = UNLABELED CIPSOv4 |
| 305 | [ 0.094377] NetLabel: unlabeled traffic allowed by default |
| 306 | [ 0.094455] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| 307 | [ 0.094464] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| 308 | [ 0.094471] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| 309 | [ 0.096072] Switching to clocksource hpet |
| 310 | [ 0.106442] AppArmor: AppArmor Filesystem Enabled |
| 311 | [ 0.106515] pnp: PnP ACPI init |
| 312 | [ 0.106548] ACPI: bus type pnp registered |
| 313 | [ 0.106859] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) |
| 314 | [ 0.106912] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 315 | [ 0.106958] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active) |
| 316 | [ 0.106989] pnp 00:03: [dma 2] |
| 317 | [ 0.107009] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) |
| 318 | [ 0.107014] pnp: PnP ACPI: found 4 devices |
| 319 | [ 0.107020] ACPI: ACPI bus type pnp unregistered |
| 320 | [ 0.113398] pci 0000:00:09.0: PCI bridge to [bus 01] |
| 321 | [ 0.113412] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| 322 | [ 0.113419] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| 323 | [ 0.113427] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| 324 | [ 0.113434] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| 325 | [ 0.113441] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| 326 | [ 0.113457] pci 0000:00:09.0: setting latency timer to 64 |
| 327 | [ 0.113467] pci_bus 0000:00: resource 4 [io 0x0d00-0x2fff] |
| 328 | [ 0.113470] pci_bus 0000:00: resource 5 [mem 0xfc000000-0xfc1fffff] |
| 329 | [ 0.113473] pci_bus 0000:00: resource 6 [io 0x0000-0x0cf7] |
| 330 | [ 0.113476] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| 331 | [ 0.113479] pci_bus 0000:01: resource 4 [io 0x0d00-0x2fff] |
| 332 | [ 0.113481] pci_bus 0000:01: resource 5 [mem 0xfc000000-0xfc1fffff] |
| 333 | [ 0.113484] pci_bus 0000:01: resource 6 [io 0x0000-0x0cf7] |
| 334 | [ 0.113559] NET: Registered protocol family 2 |
| 335 | [ 0.113775] TCP established hash table entries: 8192 (order: 5, 131072 bytes) |
| 336 | [ 0.113928] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) |
| 337 | [ 0.114052] TCP: Hash tables configured (established 8192 bind 8192) |
| 338 | [ 0.114174] TCP: reno registered |
| 339 | [ 0.114181] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| 340 | [ 0.114206] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| 341 | [ 0.114306] NET: Registered protocol family 1 |
| 342 | [ 0.114559] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 21 |
| 343 | [ 0.114691] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 20 |
| 344 | [ 0.114752] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| 345 | [ 0.114761] pci 0000:00:09.0: Enabling HT MSI Mapping |
| 346 | [ 0.114796] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| 347 | [ 0.114806] pci 0000:00:0a.0: Enabling HT MSI Mapping |
| 348 | [ 0.114844] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| 349 | [ 0.114853] pci 0000:00:0b.0: Enabling HT MSI Mapping |
| 350 | [ 0.114863] pci 0000:00:0b.0: Found enabled HT MSI Mapping |
| 351 | [ 0.114905] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| 352 | [ 0.114914] pci 0000:00:0c.0: Enabling HT MSI Mapping |
| 353 | [ 0.114925] pci 0000:00:0c.0: Found enabled HT MSI Mapping |
| 354 | [ 0.114969] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| 355 | [ 0.114978] pci 0000:00:0d.0: Enabling HT MSI Mapping |
| 356 | [ 0.114989] pci 0000:00:0d.0: Found enabled HT MSI Mapping |
| 357 | [ 0.115036] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| 358 | [ 0.115045] pci 0000:00:0e.0: Enabling HT MSI Mapping |
| 359 | [ 0.115055] pci 0000:00:0e.0: Found enabled HT MSI Mapping |
| 360 | [ 0.115184] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 |
| 361 | [ 0.115300] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 |
| 362 | [ 0.115408] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17 |
| 363 | [ 0.115431] PCI: CLS 64 bytes, default 64 |
| 364 | [ 0.115516] Trying to unpack rootfs image as initramfs... |
| 365 | [ 0.524283] Freeing initrd memory: 16396k freed |
| 366 | [ 0.542747] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 367 | [ 0.543058] Initialise module verification |
| 368 | [ 0.543128] audit: initializing netlink socket (disabled) |
| 369 | [ 0.543154] type=2000 audit(1390755856.540:1): initialized |
| 370 | [ 0.579736] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 371 | [ 0.581976] VFS: Disk quotas dquot_6.5.2 |
| 372 | [ 0.582059] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 373 | [ 0.582843] fuse init (API version 7.20) |
| 374 | [ 0.582952] msgmni has been set to 1983 |
| 375 | [ 0.583389] Key type asymmetric registered |
| 376 | [ 0.583394] Asymmetric key parser 'x509' registered |
| 377 | [ 0.583446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 378 | [ 0.583485] io scheduler noop registered |
| 379 | [ 0.583490] io scheduler deadline registered (default) |
| 380 | [ 0.583498] io scheduler cfq registered |
| 381 | [ 0.583747] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 382 | [ 0.583772] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 383 | [ 0.583920] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| 384 | [ 0.583932] ACPI: Power Button [PWRF] |
| 385 | [ 0.585106] GHES: HEST is not enabled! |
| 386 | [ 0.585222] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled |
| 387 | [ 0.605558] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 388 | [ 0.607055] Linux agpgart interface v0.103 |
| 389 | [ 0.608807] brd: module loaded |
| 390 | [ 0.609712] loop: module loaded |
| 391 | [ 0.610280] libphy: Fixed MDIO Bus: probed |
| 392 | [ 0.610367] tun: Universal TUN/TAP device driver, 1.6 |
| 393 | [ 0.610373] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| 394 | [ 0.610430] PPP generic driver version 2.4.2 |
| 395 | [ 0.610485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 396 | [ 0.610492] ehci-pci: EHCI PCI platform driver |
| 397 | [ 0.610555] ehci-pci 0000:00:02.1: setting latency timer to 64 |
| 398 | [ 0.610559] ehci-pci 0000:00:02.1: EHCI Host Controller |
| 399 | [ 0.610572] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| 400 | [ 0.610591] ehci-pci 0000:00:02.1: debug port 1 |
| 401 | [ 0.610624] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| 402 | [ 0.610659] ehci-pci 0000:00:02.1: irq 20, io mem 0xfc105000 |
| 403 | [ 0.620027] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| 404 | [ 0.620080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 405 | [ 0.620089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 406 | [ 0.620097] usb usb1: Product: EHCI Host Controller |
| 407 | [ 0.620103] usb usb1: Manufacturer: Linux 3.8.0-21-generic ehci_hcd |
| 408 | [ 0.620111] usb usb1: SerialNumber: 0000:00:02.1 |
| 409 | [ 0.620231] hub 1-0:1.0: USB hub found |
| 410 | [ 0.620241] hub 1-0:1.0: 10 ports detected |
| 411 | [ 0.620456] ehci-pci 0000:01:06.2: EHCI Host Controller |
| 412 | [ 0.620466] ehci-pci 0000:01:06.2: new USB bus registered, assigned bus number 2 |
| 413 | [ 0.620514] ehci-pci 0000:01:06.2: irq 17, io mem 0xfc002000 |
| 414 | [ 0.632014] ehci-pci 0000:01:06.2: USB 2.0 started, EHCI 1.00 |
| 415 | [ 0.632040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 416 | [ 0.632049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 417 | [ 0.632057] usb usb2: Product: EHCI Host Controller |
| 418 | [ 0.632063] usb usb2: Manufacturer: Linux 3.8.0-21-generic ehci_hcd |
| 419 | [ 0.632070] usb usb2: SerialNumber: 0000:01:06.2 |
| 420 | [ 0.632171] hub 2-0:1.0: USB hub found |
| 421 | [ 0.632178] hub 2-0:1.0: 5 ports detected |
| 422 | [ 0.632322] ehci-platform: EHCI generic platform driver |
| 423 | [ 0.632338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 424 | [ 0.632370] ohci_hcd 0000:00:02.0: setting latency timer to 64 |
| 425 | [ 0.632374] ohci_hcd 0000:00:02.0: OHCI Host Controller |
| 426 | [ 0.632388] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 |
| 427 | [ 0.632422] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfc100000 |
| 428 | [ 0.690010] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| 429 | [ 0.690019] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 430 | [ 0.690027] usb usb3: Product: OHCI Host Controller |
| 431 | [ 0.690033] usb usb3: Manufacturer: Linux 3.8.0-21-generic ohci_hcd |
| 432 | [ 0.690040] usb usb3: SerialNumber: 0000:00:02.0 |
| 433 | [ 0.690145] hub 3-0:1.0: USB hub found |
| 434 | [ 0.690154] hub 3-0:1.0: 10 ports detected |
| 435 | [ 0.690334] ohci_hcd 0000:01:06.0: OHCI Host Controller |
| 436 | [ 0.690344] ohci_hcd 0000:01:06.0: new USB bus registered, assigned bus number 4 |
| 437 | [ 0.690374] ohci_hcd 0000:01:06.0: irq 19, io mem 0xfc000000 |
| 438 | [ 0.773788] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| 439 | [ 0.773797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 440 | [ 0.773805] usb usb4: Product: OHCI Host Controller |
| 441 | [ 0.773811] usb usb4: Manufacturer: Linux 3.8.0-21-generic ohci_hcd |
| 442 | [ 0.773818] usb usb4: SerialNumber: 0000:01:06.0 |
| 443 | [ 0.773915] hub 4-0:1.0: USB hub found |
| 444 | [ 0.773930] hub 4-0:1.0: 3 ports detected |
| 445 | [ 0.774037] ohci_hcd 0000:01:06.1: OHCI Host Controller |
| 446 | [ 0.774047] ohci_hcd 0000:01:06.1: new USB bus registered, assigned bus number 5 |
| 447 | [ 0.774077] ohci_hcd 0000:01:06.1: irq 18, io mem 0xfc001000 |
| 448 | [ 0.857782] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| 449 | [ 0.857789] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 450 | [ 0.857794] usb usb5: Product: OHCI Host Controller |
| 451 | [ 0.857799] usb usb5: Manufacturer: Linux 3.8.0-21-generic ohci_hcd |
| 452 | [ 0.857804] usb usb5: SerialNumber: 0000:01:06.1 |
| 453 | [ 0.857897] hub 5-0:1.0: USB hub found |
| 454 | [ 0.857906] hub 5-0:1.0: 2 ports detected |
| 455 | [ 0.857995] uhci_hcd: USB Universal Host Controller Interface driver |
| 456 | [ 0.858086] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| 457 | [ 0.860708] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 458 | [ 0.860717] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 459 | [ 0.860809] mousedev: PS/2 mouse device common for all mice |
| 460 | [ 0.860910] rtc_cmos rtc_cmos: RTC can wake from S4 |
| 461 | [ 0.881191] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| 462 | [ 0.881222] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| 463 | [ 0.881362] device-mapper: uevent: version 1.0.3 |
| 464 | [ 0.881445] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com |
| 465 | [ 0.881464] cpuidle: using governor ladder |
| 466 | [ 0.881469] cpuidle: using governor menu |
| 467 | [ 0.881475] ledtrig-cpu: registered to indicate activity on CPUs |
| 468 | [ 0.881482] EFI Variables Facility v0.08 2004-May-17 |
| 469 | [ 0.881762] ashmem: initialized |
| 470 | [ 0.881916] TCP: cubic registered |
| 471 | [ 0.882045] NET: Registered protocol family 10 |
| 472 | [ 0.882309] NET: Registered protocol family 17 |
| 473 | [ 0.882329] Key type dns_resolver registered |
| 474 | [ 0.882532] Loading module verification certificates |
| 475 | [ 0.883936] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: da639d7d39047796a6cdf66158dce65752f170ea' |
| 476 | [ 0.883970] registered taskstats version 1 |
| 477 | [ 0.887556] Key type trusted registered |
| 478 | [ 0.890770] Key type encrypted registered |
| 479 | [ 0.894273] rtc_cmos rtc_cmos: setting system clock to 2014-01-26 17:04:18 UTC (1390755858) |
| 480 | [ 0.894555] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects |
| 481 | [ 0.894561] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup |
| 482 | [ 0.894591] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found |
| 483 | [ 0.894595] EDD information not available. |
| 484 | [ 0.896833] Freeing unused kernel memory: 992k freed |
| 485 | [ 0.897735] Write protecting the kernel read-only data: 12288k |
| 486 | [ 0.902561] Freeing unused kernel memory: 1176k freed |
| 487 | [ 0.904044] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 |
| 488 | [ 0.909525] Freeing unused kernel memory: 1080k freed |
| 489 | [ 0.934680] udevd[88]: starting version 175 |
| 490 | [ 0.936095] usb 1-3: new high-speed USB device number 2 using ehci-pci |
| 491 | [ 1.069567] usb 1-3: New USB device found, idVendor=0525, idProduct=127a |
| 492 | [ 1.069585] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 493 | [ 1.069591] usb 1-3: Product: Ajays USB 2.0 Debug Cable |
| 494 | [ 1.069595] usb 1-3: Manufacturer: Ajays Technology |
| 495 | [ 1.069600] usb 1-3: SerialNumber: Ajays002 |
| 496 | [ 1.102986] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. |
| 497 | [ 1.116072] forcedeth 0000:00:0a.0: enabling device (0000 -> 0003) |
| 498 | [ 1.116279] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 23 |
| 499 | [ 1.116316] forcedeth 0000:00:0a.0: setting latency timer to 64 |
| 500 | [ 1.118577] Disabling lock debugging due to kernel taint |
| 501 | [ 1.163973] FDC 0 is a post-1991 82077 |
| 502 | [ 1.180092] usb 2-2: new high-speed USB device number 2 using ehci-pci |
| 503 | [ 1.323972] usb 2-2: New USB device found, idVendor=13fe, idProduct=4100 |
| 504 | [ 1.323987] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 505 | [ 1.323993] usb 2-2: Product: USB DISK 2.0 |
| 506 | [ 1.323998] usb 2-2: Manufacturer: |
| 507 | [ 1.324009] usb 2-2: SerialNumber: 0701392CAF3D5516 |
| 508 | [ 1.328613] Initializing USB Mass Storage driver... |
| 509 | [ 1.328800] scsi0 : usb-storage 2-2:1.0 |
| 510 | [ 1.329152] usbcore: registered new interface driver usb-storage |
| 511 | [ 1.329159] USB Mass Storage support registered. |
| 512 | [ 1.540027] tsc: Refined TSC clocksource calibration: 2010.302 MHz |
| 513 | [ 1.540045] Switching to clocksource tsc |
| 514 | [ 1.640521] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 66:32:54:81:e0:00 |
| 515 | [ 1.640530] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 |
| 516 | [ 1.641047] pata_amd 0000:00:06.0: version 0.4.1 |
| 517 | [ 1.641106] pata_amd 0000:00:06.0: setting latency timer to 64 |
| 518 | [ 1.642374] scsi1 : pata_amd |
| 519 | [ 1.642539] scsi2 : pata_amd |
| 520 | [ 1.642586] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2820 irq 14 |
| 521 | [ 1.642592] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2828 irq 15 |
| 522 | [ 1.644287] sata_nv 0000:00:07.0: version 3.5 |
| 523 | [ 1.644482] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 |
| 524 | [ 1.644577] sata_nv 0000:00:07.0: setting latency timer to 64 |
| 525 | [ 1.645830] scsi3 : sata_nv |
| 526 | [ 1.646024] scsi4 : sata_nv |
| 527 | [ 1.646071] ata3: SATA max UDMA/133 cmd 0x2850 ctl 0x2878 bmdma 0x2830 irq 22 |
| 528 | [ 1.646078] ata4: SATA max UDMA/133 cmd 0x2858 ctl 0x287c bmdma 0x2838 irq 22 |
| 529 | [ 1.646320] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 |
| 530 | [ 1.646392] sata_nv 0000:00:08.0: setting latency timer to 64 |
| 531 | [ 1.646768] scsi5 : sata_nv |
| 532 | [ 1.646885] scsi6 : sata_nv |
| 533 | [ 1.646934] ata5: SATA max UDMA/133 cmd 0x2860 ctl 0x2880 bmdma 0x2840 irq 22 |
| 534 | [ 1.646939] ata6: SATA max UDMA/133 cmd 0x2868 ctl 0x2884 bmdma 0x2848 irq 22 |
| 535 | [ 1.956016] ata3: SATA link down (SStatus 0 SControl 300) |
| 536 | [ 2.120014] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 537 | [ 2.128267] ata5.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133 |
| 538 | [ 2.128274] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) |
| 539 | [ 2.144241] ata5.00: configured for UDMA/133 |
| 540 | [ 2.284008] ata4: SATA link down (SStatus 0 SControl 300) |
| 541 | [ 2.284180] scsi 5:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5 |
| 542 | [ 2.285455] sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) |
| 543 | [ 2.285468] sd 5:0:0:0: [sda] 4096-byte physical blocks |
| 544 | [ 2.285522] sd 5:0:0:0: [sda] Write Protect is off |
| 545 | [ 2.285528] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 546 | [ 2.285552] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 547 | [ 2.285895] sd 5:0:0:0: Attached scsi generic sg0 type 0 |
| 548 | [ 2.330313] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 |
| 549 | [ 2.331090] sd 0:0:0:0: Attached scsi generic sg1 type 0 |
| 550 | [ 2.356061] sda: sda1 sda2 sda3 sda4 sda5 |
| 551 | [ 2.356565] sd 5:0:0:0: [sda] Attached SCSI disk |
| 552 | [ 2.596067] ata6: SATA link down (SStatus 0 SControl 300) |
| 553 | [ 2.666753] EXT4-fs (sda4): INFO: recovery required on readonly filesystem |
| 554 | [ 2.666770] EXT4-fs (sda4): write access will be enabled during recovery |
| 555 | [ 3.000039] EXT4-fs (sda4): recovery complete |
| 556 | [ 3.008251] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) |
| 557 | [ 6.369342] sd 0:0:0:0: [sdb] 60604416 512-byte logical blocks: (31.0 GB/28.8 GiB) |
| 558 | [ 6.371701] sd 0:0:0:0: [sdb] Write Protect is off |
| 559 | [ 6.371708] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00 |
| 560 | [ 6.373452] sd 0:0:0:0: [sdb] No Caching mode page present |
| 561 | [ 6.373458] sd 0:0:0:0: [sdb] Assuming drive cache: write through |
| 562 | [ 6.382451] sd 0:0:0:0: [sdb] No Caching mode page present |
| 563 | [ 6.382457] sd 0:0:0:0: [sdb] Assuming drive cache: write through |
| 564 | [ 6.385717] sdb: sdb1 |
| 565 | [ 6.393076] sd 0:0:0:0: [sdb] No Caching mode page present |
| 566 | [ 6.393083] sd 0:0:0:0: [sdb] Assuming drive cache: write through |
| 567 | [ 6.393088] sd 0:0:0:0: [sdb] Attached SCSI removable disk |
| 568 | [ 7.306249] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 569 | [ 7.368985] udevd[318]: starting version 175 |
| 570 | [ 7.489524] lp: driver loaded but no devices found |
| 571 | [ 7.637761] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro |
| 572 | [ 7.759956] i2c i2c-0: nForce2 SMBus adapter at 0x2480 |
| 573 | [ 7.759985] i2c i2c-1: nForce2 SMBus adapter at 0x24c0 |
| 574 | [ 7.952492] parport_pc 00:02: reported by Plug and Play ACPI |
| 575 | [ 7.952521] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] |
| 576 | [ 8.097305] lp0: using parport0 (interrupt-driven). |
| 577 | [ 8.437393] type=1400 audit(1390755866.040:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=569 comm="apparmor_parser" |
| 578 | [ 8.445613] type=1400 audit(1390755866.048:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=569 comm="apparmor_parser" |
| 579 | [ 8.445953] type=1400 audit(1390755866.048:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=569 comm="apparmor_parser" |
| 580 | [ 8.525645] Bluetooth: Core ver 2.16 |
| 581 | [ 8.525690] NET: Registered protocol family 31 |
| 582 | [ 8.525693] Bluetooth: HCI device and connection manager initialized |
| 583 | [ 8.525707] Bluetooth: HCI socket layer initialized |
| 584 | [ 8.525711] Bluetooth: L2CAP socket layer initialized |
| 585 | [ 8.525728] Bluetooth: SCO socket layer initialized |
| 586 | [ 8.566350] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 587 | [ 8.566358] Bluetooth: BNEP filters: protocol multicast |
| 588 | [ 8.566375] Bluetooth: BNEP socket layer initialized |
| 589 | [ 8.576808] Bluetooth: RFCOMM TTY layer initialized |
| 590 | [ 8.576831] Bluetooth: RFCOMM socket layer initialized |
| 591 | [ 8.576833] Bluetooth: RFCOMM ver 1.11 |
| 592 | [ 8.648851] usbcore: registered new interface driver usbserial |
| 593 | [ 8.655854] usbcore: registered new interface driver usbserial_generic |
| 594 | [ 8.670631] usbserial: USB Serial support registered for generic |
| 595 | [ 8.699713] init: avahi-cups-reload main process (593) terminated with status 1 |
| 596 | [ 8.734543] usbcore: registered new interface driver usb_debug |
| 597 | [ 8.735765] usbserial: USB Serial support registered for debug |
| 598 | [ 8.735800] usb_debug 1-3:1.0: debug converter detected |
| 599 | [ 8.736522] ppdev: user-space parallel port driver |
| 600 | [ 8.742872] MCE: In-kernel MCE decoding enabled. |
| 601 | [ 8.748121] usb 1-3: debug converter now attached to ttyUSB0 |
| 602 | [ 8.773991] type=1400 audit(1390755866.376:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=608 comm="apparmor_parser" |
| 603 | [ 8.779938] type=1400 audit(1390755866.380:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=608 comm="apparmor_parser" |
| 604 | [ 8.813234] EDAC MC: Ver: 3.0.0 |
| 605 | [ 8.850893] AMD64 EDAC driver v3.4.0 |
| 606 | [ 8.850961] EDAC amd64: DRAM ECC disabled. |
| 607 | [ 8.850966] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| 608 | [ 8.850966] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| 609 | [ 8.850966] (Note that use of the override may cause unknown side effects.) |
| 610 | [ 8.970227] microcode: AMD CPU family 0xf not supported |
| 611 | [ 9.226699] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23 |
| 612 | [ 9.226741] snd_intel8x0 0000:00:04.0: setting latency timer to 64 |
| 613 | [ 9.572052] intel8x0_measure_ac97_clock: measured 53465 usecs (2624 samples) |
| 614 | [ 9.572058] intel8x0: clocking to 46945 |
| 615 | [ 9.784250] init: failsafe main process (699) killed by TERM signal |
| 616 | [ 9.966037] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2 |
| 617 | [ 10.206112] type=1400 audit(1390755867.808:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=814 comm="apparmor_parser" |
| 618 | [ 10.206587] type=1400 audit(1390755867.808:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=814 comm="apparmor_parser" |
| 619 | [ 10.227395] type=1400 audit(1390755867.828:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=817 comm="apparmor_parser" |
| 620 | [ 10.227862] type=1400 audit(1390755867.828:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=817 comm="apparmor_parser" |
| 621 | [ 10.243665] type=1400 audit(1390755867.844:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=818 comm="apparmor_parser" |
| 622 | [ 11.484545] init: udev-fallback-graphics main process (975) terminated with status 1 |
| 623 | [ 11.877024] init: plymouth-splash main process (1079) terminated with status 1 |
| 624 | [ 12.626135] init: lightdm main process (982) terminated with status 1 |
| 625 | [ 12.644473] init: plymouth-ready (startup) main process (230) terminated with status 1 |
| 626 | [ 12.686103] init: plymouth-stop pre-start process (1312) terminated with status 1 |
| 627 | [ 31.560111] init: failsafe-x main process (1525) terminated with status 1 |