Gitiles
Code Review Sign In
review.coreboot.org / board-status / 004dbcf7151d19d33784c5ebab46b0212344b98b / . / asrock / e350m1 / 4.1-775-g3414561 / 2015-10-17T18:10:29Z / kernel_log.txt
blob: ec4cf7b16fc3490f6c78e2ec4eb24bd8a7ee1d23 [file] [log] [blame]
Paul Menzel8d237042015-10-18 13:02:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt17-1 (2015-09-26)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f9cfff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000c7f9d000-0x00000000dfffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.1-775-g3414561 10/17/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000 mask F80000000 write-back
26[ 0.000000] 1 base 080000000 mask FC0000000 write-back
27[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 000000021f000000 aka 8688M
34[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
35[ 0.000000] found SMP MP-table at [mem 0x000f7280-0x000f728f] mapped at [c00f7280]
36[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
37[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
38[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
39[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
40[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
41[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
42[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
43[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
44[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
45[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
46[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
47[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
48[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
49[ 0.000000] BRK [0x0179a000, 0x0179afff] PGTABLE
50[ 0.000000] BRK [0x0179b000, 0x0179cfff] PGTABLE
51[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
52[ 0.000000] BRK [0x0179e000, 0x0179efff] PGTABLE
53[ 0.000000] RAMDISK: [mem 0x3604c000-0x3701dfff]
54[ 0.000000] ACPI: Early table checksum verification disabled
55[ 0.000000] ACPI: RSDP 0x00000000000F7480 000024 (v02 CORE )
56[ 0.000000] ACPI: XSDT 0x00000000C7FB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 0x00000000C7FBA740 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 0x00000000C7FB8280 0024B3 (v02 ASROCK COREBOOT 00010001 INTL 20140926)
59[ 0.000000] ACPI: FACS 0x00000000C7FB8240 000040
60[ 0.000000] ACPI: FACS 0x00000000C7FB8240 000040
61[ 0.000000] ACPI: SSDT 0x00000000C7FBA840 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
62[ 0.000000] ACPI: TCPA 0x00000000C7FBA890 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: APIC 0x00000000C7FBA8D0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: HEST 0x00000000C7FBA930 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: SSDT 0x00000000C7FBA960 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
66[ 0.000000] ACPI: SSDT 0x00000000C7FBBFF0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
67[ 0.000000] ACPI: HPET 0x00000000C7FBC3D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: Local APIC address 0xfee00000
69[ 0.000000] 7802MB HIGHMEM available.
70[ 0.000000] 885MB LOWMEM available.
71[ 0.000000] mapped low ram: 0 - 375fe000
72[ 0.000000] low ram: 0 - 375fe000
73[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
74[ 0.000000] Zone ranges:
75[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
76[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
77[ 0.000000] HighMem [mem 0x375fe000-0x1effffff]
78[ 0.000000] Movable zone start for each node
79[ 0.000000] Early memory node ranges
80[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
81[ 0.000000] node 0: [mem 0x00100000-0xc7f9cfff]
82[ 0.000000] node 0: [mem 0x00000000-0x1effffff]
83[ 0.000000] On node 0 totalpages: 1994555
84[ 0.000000] free_area_init_node: node 0, pgdat c165aec0, node_mem_map f1c6c020
85[ 0.000000] DMA zone: 32 pages used for memmap
86[ 0.000000] DMA zone: 0 pages reserved
87[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
88[ 0.000000] Normal zone: 1740 pages used for memmap
89[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
90[ 0.000000] HighMem zone: 15605 pages used for memmap
91[ 0.000000] HighMem zone: 1767839 pages, LIFO batch:31
92[ 0.000000] Using APIC driver default
93[ 0.000000] ACPI: PM-Timer IO Port: 0x808
94[ 0.000000] ACPI: Local APIC address 0xfee00000
95[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
96[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
97[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
98[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
99[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
100[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
101[ 0.000000] ACPI: IRQ0 used by override.
102[ 0.000000] ACPI: IRQ2 used by override.
103[ 0.000000] ACPI: IRQ9 used by override.
104[ 0.000000] Using ACPI (MADT) for SMP configuration information
105[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
106[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
107[ 0.000000] nr_irqs_gsi: 40
108[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
109[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
110[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
111[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
112[ 0.000000] Booting paravirtualized kernel on bare hardware
113[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
114[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75d0000 s34752 r0 d22592 u57344
115[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
116[ 0.000000] pcpu-alloc: [0] 0 [0] 1
117[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992783
118[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
119[ 0.000000] PCIe ASPM is forcibly enabled
120[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
121[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
122[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
123[ 0.000000] Initializing CPU#0
124[ 0.000000] Initializing HighMem for node 0 (000375fe:0021f000)
125[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
126[ 0.000000] Memory: 7883664K/7978220K available (4603K kernel code, 518K rwdata, 1452K rodata, 656K init, 460K bss, 94556K reserved, 7071356K highmem)
127[ 0.000000] virtual kernel memory layout:
128 fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
129 pkmap : 0xff600000 - 0xff800000 (2048 kB)
130 vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
131 lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
132 .init : 0xc166f000 - 0xc1713000 ( 656 kB)
133 .data : 0xc147f14c - 0xc166d880 (1977 kB)
134 .text : 0xc1000000 - 0xc147f14c (4604 kB)
135[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
136[ 0.000000] Hierarchical RCU implementation.
137[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
138[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
139[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
140[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
141[ 0.000000] CPU 0 irqstacks, hard=f1806000 soft=f1808000
142[ 0.000000] spurious 8259A interrupt: IRQ7.
143[ 0.000000] Console: colour VGA+ 80x25
144[ 0.000000] console [tty0] enabled
145[ 0.000000] hpet clockevent registered
146[ 0.000000] tsc: Fast TSC calibration using PIT
147[ 0.000000] tsc: Detected 1599.956 MHz processor
148[ 0.000054] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.91 BogoMIPS (lpj=6399824)
149[ 0.000060] pid_max: default: 32768 minimum: 301
150[ 0.000077] ACPI: Core revision 20140424
151[ 0.005928] ACPI: All ACPI Tables successfully acquired
152[ 0.005976] Security Framework initialized
153[ 0.005996] AppArmor: AppArmor disabled by boot time parameter
154[ 0.006000] Yama: disabled by default; enable with sysctl kernel.yama.*
155[ 0.006034] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
156[ 0.006039] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
157[ 0.006438] Initializing cgroup subsys memory
158[ 0.006449] Initializing cgroup subsys devices
159[ 0.006463] Initializing cgroup subsys freezer
160[ 0.006470] Initializing cgroup subsys net_cls
161[ 0.006481] Initializing cgroup subsys blkio
162[ 0.006490] Initializing cgroup subsys perf_event
163[ 0.006494] Initializing cgroup subsys net_prio
164[ 0.006536] CPU: Physical Processor ID: 0
165[ 0.006539] CPU: Processor Core ID: 0
166[ 0.006544] mce: CPU supports 6 MCE banks
167[ 0.006564] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
168Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
169tlb_flushall_shift: 6
170[ 0.006893] Freeing SMP alternatives memory: 20K (c1713000 - c1718000)
171[ 0.009069] ftrace: allocating 20781 entries in 41 pages
172[ 0.028427] Enabling APIC mode: Flat. Using 1 I/O APICs
173[ 0.028840] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
174[ 0.068529] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
175[ 0.176482] Performance Events: AMD PMU driver.
176[ 0.176492] ... version: 0
177[ 0.176494] ... bit width: 48
178[ 0.176497] ... generic registers: 4
179[ 0.176500] ... value mask: 0000ffffffffffff
180[ 0.176502] ... max period: 00007fffffffffff
181[ 0.176505] ... fixed-purpose events: 0
182[ 0.176508] ... event mask: 000000000000000f
183[ 0.179662] CPU 1 irqstacks, hard=f193e000 soft=f1940000
184[ 0.179671] x86: Booting SMP configuration:
185[ 0.179674] .... node #0, CPUs: #1
186[ 0.189714] Initializing CPU#1
187[ 0.192883] x86: Booted up 1 node, 2 CPUs
188[ 0.192890] smpboot: Total of 2 processors activated (6399.82 BogoMIPS)
189[ 0.193673] devtmpfs: initialized
190[ 0.196295] pinctrl core: initialized pinctrl subsystem
191[ 0.196467] NET: Registered protocol family 16
192[ 0.196689] cpuidle: using governor ladder
193[ 0.196696] cpuidle: using governor menu
194[ 0.197001] ACPI: bus type PCI registered
195[ 0.197006] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
196[ 0.197328] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
197[ 0.197333] bios32_service(0x49435024): not present
198[ 0.197336] PCI: Using configuration type 1 for base access
199[ 0.197339] PCI: Using configuration type 1 for extended access
200[ 0.210605] ACPI: Added _OSI(Module Device)
201[ 0.210613] ACPI: Added _OSI(Processor Device)
202[ 0.210617] ACPI: Added _OSI(3.0 _SCP Extensions)
203[ 0.210621] ACPI: Added _OSI(Processor Aggregator Device)
204[ 0.212789] ACPI: Executed 2 blocks of module-level executable AML code
205[ 0.216946] ACPI: Interpreter enabled
206[ 0.216968] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
207[ 0.216994] ACPI: (supports S0 S1 S3 S4 S5)
208[ 0.216998] ACPI: Using IOAPIC for interrupt routing
209[ 0.217028] HEST: Table parsing has been initialized.
210[ 0.217037] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
211[ 0.233489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
212[ 0.233504] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
213[ 0.233645] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
214[ 0.234214] PCI host bridge to bus 0000:00
215[ 0.234221] pci_bus 0000:00: root bus resource [bus 00-ff]
216[ 0.234226] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
217[ 0.234230] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
218[ 0.234238] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
219[ 0.234242] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
220[ 0.234259] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
221[ 0.234447] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
222[ 0.234467] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
223[ 0.234478] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
224[ 0.234489] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
225[ 0.234556] pci 0000:00:01.0: supports D1 D2
226[ 0.234639] pci 0000:00:01.0: System wakeup disabled by ACPI
227[ 0.234729] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
228[ 0.234746] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
229[ 0.234824] pci 0000:00:01.1: supports D1 D2
230[ 0.234906] pci 0000:00:01.1: System wakeup disabled by ACPI
231[ 0.235095] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
232[ 0.235123] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
233[ 0.235137] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
234[ 0.235152] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
235[ 0.235166] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
236[ 0.235180] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
237[ 0.235195] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
238[ 0.235426] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
239[ 0.235446] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
240[ 0.235596] pci 0000:00:12.0: System wakeup disabled by ACPI
241[ 0.235756] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
242[ 0.235784] pci 0000:00:12.2: reg 0x10: [mem 0xf014b400-0xf014b4ff]
243[ 0.235895] pci 0000:00:12.2: supports D1 D2
244[ 0.235899] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
245[ 0.235984] pci 0000:00:12.2: System wakeup disabled by ACPI
246[ 0.236145] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
247[ 0.236166] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
248[ 0.236314] pci 0000:00:13.0: System wakeup disabled by ACPI
249[ 0.236432] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
250[ 0.236460] pci 0000:00:13.2: reg 0x10: [mem 0xf014b500-0xf014b5ff]
251[ 0.236571] pci 0000:00:13.2: supports D1 D2
252[ 0.236575] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
253[ 0.236659] pci 0000:00:13.2: System wakeup disabled by ACPI
254[ 0.236821] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
255[ 0.237125] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
256[ 0.237157] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
257[ 0.237247] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
258[ 0.237418] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
259[ 0.237713] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
260[ 0.237836] pci 0000:00:14.4: System wakeup disabled by ACPI
261[ 0.237987] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
262[ 0.238008] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
263[ 0.238159] pci 0000:00:14.5: System wakeup disabled by ACPI
264[ 0.238317] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
265[ 0.238424] pci 0000:00:15.0: supports D1 D2
266[ 0.238514] pci 0000:00:15.0: System wakeup disabled by ACPI
267[ 0.238673] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
268[ 0.238787] pci 0000:00:15.1: supports D1 D2
269[ 0.238877] pci 0000:00:15.1: System wakeup disabled by ACPI
270[ 0.239038] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
271[ 0.239206] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
272[ 0.239369] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
273[ 0.239536] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
274[ 0.239716] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
275[ 0.239880] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
276[ 0.240041] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
277[ 0.240207] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
278[ 0.240531] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
279[ 0.240547] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
280[ 0.240551] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
281[ 0.240556] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
282[ 0.240560] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
283[ 0.240662] pci 0000:00:15.0: PCI bridge to [bus 02]
284[ 0.240804] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
285[ 0.240834] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
286[ 0.240875] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
287[ 0.240902] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
288[ 0.241036] pci 0000:03:00.0: supports D1 D2
289[ 0.241040] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
290[ 0.249255] pci 0000:00:15.1: PCI bridge to [bus 03]
291[ 0.249275] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
292[ 0.249289] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
293[ 0.249324] pci_bus 0000:00: on NUMA node 0
294[ 0.250323] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
295[ 0.250424] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
296[ 0.250519] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
297[ 0.250612] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
298[ 0.250705] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
299[ 0.250798] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
300[ 0.250886] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
301[ 0.250983] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
302[ 0.251243] ACPI: Enabled 6 GPEs in block 00 to 1F
303[ 0.251715] vgaarb: setting as boot device: PCI:0000:00:01.0
304[ 0.251725] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
305[ 0.251737] vgaarb: loaded
306[ 0.251740] vgaarb: bridge control possible 0000:00:01.0
307[ 0.251885] PCI: Using ACPI for IRQ routing
308[ 0.251891] PCI: pci_cache_line_size set to 64 bytes
309[ 0.252045] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
310[ 0.252051] e820: reserve RAM buffer [mem 0xc7f9d000-0xc7ffffff]
311[ 0.252054] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
312[ 0.252397] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
313[ 0.252405] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
314[ 0.254583] Switched to clocksource hpet
315[ 0.265313] pnp: PnP ACPI init
316[ 0.265343] ACPI: bus type PNP registered
317[ 0.265726] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
318[ 0.265998] pnp: PnP ACPI: found 1 devices
319[ 0.266002] ACPI: bus type PNP unregistered
320[ 0.266011] PnPBIOS: Disabled by ACPI PNP
321[ 0.309313] pci 0000:00:14.4: PCI bridge to [bus 01]
322[ 0.309339] pci 0000:00:15.0: PCI bridge to [bus 02]
323[ 0.309356] pci 0000:00:15.1: PCI bridge to [bus 03]
324[ 0.309363] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
325[ 0.309375] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
326[ 0.309387] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
327[ 0.309392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
328[ 0.309396] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
329[ 0.309401] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
330[ 0.309406] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
331[ 0.309410] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
332[ 0.309414] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
333[ 0.309418] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
334[ 0.309423] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
335[ 0.309427] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
336[ 0.309566] NET: Registered protocol family 2
337[ 0.310230] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
338[ 0.310260] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
339[ 0.310298] TCP: Hash tables configured (established 8192 bind 8192)
340[ 0.310345] TCP: reno registered
341[ 0.310350] UDP hash table entries: 512 (order: 2, 16384 bytes)
342[ 0.310363] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
343[ 0.310607] NET: Registered protocol family 1
344[ 0.310641] pci 0000:00:01.0: Video device with shadowed ROM
345[ 0.367936] PCI: CLS 64 bytes, default 64
346[ 0.368065] Unpacking initramfs...
347[ 0.997467] Freeing initrd memory: 16200K (f604c000 - f701e000)
348[ 0.998139] microcode: CPU0: patch_level=0x05000119
349[ 0.998156] microcode: CPU1: patch_level=0x05000119
350[ 0.998552] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
351[ 0.998571] LVT offset 0 assigned for vector 0x400
352[ 0.998701] perf: AMD IBS detected (0x000000ff)
353[ 0.999437] futex hash table entries: 512 (order: 3, 32768 bytes)
354[ 0.999556] audit: initializing netlink subsys (disabled)
355[ 0.999598] audit: type=2000 audit(1445166120.892:1): initialized
356[ 1.000389] HugeTLB registered 2 MB page size, pre-allocated 0 pages
357[ 1.000429] zbud: loaded
358[ 1.000944] VFS: Disk quotas dquot_6.5.2
359[ 1.001050] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
360[ 1.001235] msgmni has been set to 1618
361[ 1.002428] alg: No test for stdrng (krng)
362[ 1.002491] bounce: pool size: 64 pages
363[ 1.002632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
364[ 1.002723] io scheduler noop registered
365[ 1.002728] io scheduler deadline registered
366[ 1.002862] io scheduler cfq registered (default)
367[ 1.003419] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
368[ 1.003846] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
369[ 1.004092] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
370[ 1.004101] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
371[ 1.004135] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
372[ 1.004139] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
373[ 1.004146] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
374[ 1.004181] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
375[ 1.004219] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
376[ 1.004330] GHES: Failed to enable APEI firmware first mode.
377[ 1.004345] isapnp: ISA Plug & Play support disabled
378[ 1.004749] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
379[ 1.025456] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
380[ 1.027266] Linux agpgart interface v0.103
381[ 1.027671] i8042: PNP: No PS/2 controller found. Probing ports directly.
382[ 1.031670] serio: i8042 KBD port at 0x60,0x64 irq 1
383[ 1.031691] serio: i8042 AUX port at 0x60,0x64 irq 12
384[ 1.032531] mousedev: PS/2 mouse device common for all mice
385[ 1.032745] rtc_cmos 00:00: RTC can wake from S4
386[ 1.033151] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
387[ 1.033267] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
388[ 1.033308] ledtrig-cpu: registered to indicate activity on CPUs
389[ 1.033621] TCP: cubic registered
390[ 1.033788] NET: Registered protocol family 10
391[ 1.034307] mip6: Mobile IPv6
392[ 1.034314] NET: Registered protocol family 17
393[ 1.034325] mpls_gso: MPLS GSO support
394[ 1.034772] Using IPI No-Shortcut mode
395[ 1.035169] registered taskstats version 1
396[ 1.035979] rtc_cmos 00:00: setting system clock to 2015-10-18 11:02:01 UTC (1445166121)
397[ 1.036084] PM: Hibernation image not present or could not be loaded.
398[ 1.036660] Freeing unused kernel memory: 656K (c166f000 - c1713000)
399[ 1.036814] Write protecting the kernel text: 4608k
400[ 1.036956] Write protecting the kernel read-only data: 1456k
401[ 1.036959] NX-protecting the kernel data: 3584k
402[ 1.129374] systemd-udevd[61]: starting version 215
403[ 1.130130] random: systemd-udevd urandom read with 0 bits of entropy available
404[ 1.149659] ACPI: bus type USB registered
405[ 1.149727] usbcore: registered new interface driver usbfs
406[ 1.149753] usbcore: registered new interface driver hub
407[ 1.157870] SCSI subsystem initialized
408[ 1.158123] usbcore: registered new device driver usb
409[ 1.159796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
410[ 1.160366] ehci-pci: EHCI PCI platform driver
411[ 1.160532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
412[ 1.160798] QUIRK: Enable AMD PLL fix
413[ 1.160843] ehci-pci 0000:00:12.2: EHCI Host Controller
414[ 1.160860] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
415[ 1.160872] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
416[ 1.160957] ehci-pci 0000:00:12.2: debug port 1
417[ 1.161031] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014b400
418[ 1.165496] libata version 3.00 loaded.
419[ 1.171320] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
420[ 1.171552] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
421[ 1.171558] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
422[ 1.171562] usb usb1: Product: EHCI Host Controller
423[ 1.171567] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
424[ 1.171571] usb usb1: SerialNumber: 0000:00:12.2
425[ 1.171854] hub 1-0:1.0: USB hub found
426[ 1.172158] hub 1-0:1.0: 5 ports detected
427[ 1.173101] ehci-pci 0000:00:13.2: EHCI Host Controller
428[ 1.173115] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
429[ 1.173126] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
430[ 1.173143] ehci-pci 0000:00:13.2: debug port 1
431[ 1.173198] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014b500
432[ 1.173912] thermal LNXTHERM:00: registered as thermal_zone0
433[ 1.173917] ACPI: Thermal Zone [TZ00] (46 C)
434[ 1.181670] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
435[ 1.182197] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
436[ 1.182677] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf7e3a000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 42
437[ 1.182684] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
438[ 1.182781] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
439[ 1.182955] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
440[ 1.182961] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
441[ 1.182966] usb usb2: Product: EHCI Host Controller
442[ 1.182970] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
443[ 1.182973] usb usb2: SerialNumber: 0000:00:13.2
444[ 1.183266] hub 2-0:1.0: USB hub found
445[ 1.183283] hub 2-0:1.0: 5 ports detected
446[ 1.184844] ohci-pci: OHCI PCI platform driver
447[ 1.185203] ohci-pci 0000:00:12.0: OHCI PCI host controller
448[ 1.185218] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
449[ 1.185282] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
450[ 1.242952] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
451[ 1.242961] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
452[ 1.242966] usb usb3: Product: OHCI PCI host controller
453[ 1.242970] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
454[ 1.242974] usb usb3: SerialNumber: 0000:00:12.0
455[ 1.243575] hub 3-0:1.0: USB hub found
456[ 1.243600] hub 3-0:1.0: 5 ports detected
457[ 1.244232] ohci-pci 0000:00:13.0: OHCI PCI host controller
458[ 1.244244] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
459[ 1.244293] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
460[ 1.302985] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
461[ 1.302995] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
462[ 1.302999] usb usb4: Product: OHCI PCI host controller
463[ 1.303004] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
464[ 1.303007] usb usb4: SerialNumber: 0000:00:13.0
465[ 1.303611] hub 4-0:1.0: USB hub found
466[ 1.303635] hub 4-0:1.0: 5 ports detected
467[ 1.304257] ohci-pci 0000:00:14.5: OHCI PCI host controller
468[ 1.304270] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
469[ 1.304327] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
470[ 1.363028] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
471[ 1.363038] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
472[ 1.363042] usb usb5: Product: OHCI PCI host controller
473[ 1.363046] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
474[ 1.363050] usb usb5: SerialNumber: 0000:00:14.5
475[ 1.363647] hub 5-0:1.0: USB hub found
476[ 1.363670] hub 5-0:1.0: 2 ports detected
477[ 1.363937] ahci 0000:00:11.0: version 3.0
478[ 1.364579] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
479[ 1.364587] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
480[ 1.366976] scsi0 : ahci
481[ 1.368070] scsi1 : ahci
482[ 1.368332] scsi2 : ahci
483[ 1.368585] scsi3 : ahci
484[ 1.369094] scsi4 : ahci
485[ 1.369344] scsi5 : ahci
486[ 1.369464] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
487[ 1.369470] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
488[ 1.369475] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
489[ 1.369480] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
490[ 1.369485] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
491[ 1.369490] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
492[ 1.666886] usb 2-1: new high-speed USB device number 2 using ehci-pci
493[ 1.686969] ata6: SATA link down (SStatus 0 SControl 300)
494[ 1.687024] ata5: SATA link down (SStatus 0 SControl 300)
495[ 1.687066] ata2: SATA link down (SStatus 0 SControl 300)
496[ 1.687117] ata1: SATA link down (SStatus 0 SControl 300)
497[ 1.687147] ata3: SATA link down (SStatus 0 SControl 300)
498[ 1.802623] usb 2-1: New USB device found, idVendor=0bda, idProduct=8172
499[ 1.802640] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
500[ 1.802649] usb 2-1: Product: RTL8191S WLAN Adapter
501[ 1.802657] usb 2-1: Manufacturer: Manufacturer Realtek
502[ 1.802664] usb 2-1: SerialNumber: 00e04c000001
503[ 1.858968] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
504[ 1.859955] ata4.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
505[ 1.859966] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
506[ 1.860506] ata4.00: configured for UDMA/100
507[ 1.861116] scsi 3:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
508[ 1.870169] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
509[ 1.870307] sd 3:0:0:0: [sda] Write Protect is off
510[ 1.870313] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
511[ 1.870355] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
512[ 1.871164] sda: sda1 sda2
513[ 1.871730] sd 3:0:0:0: [sda] Attached SCSI disk
514[ 1.873046] sd 3:0:0:0: Attached scsi generic sg0 type 0
515[ 1.928250] device-mapper: uevent: version 1.0.3
516[ 1.928419] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
517[ 1.994882] tsc: Refined TSC clocksource calibration: 1599.999 MHz
518[ 2.126896] usb 4-2: new low-speed USB device number 2 using ohci-pci
519[ 2.299110] usb 4-2: New USB device found, idVendor=046d, idProduct=c312
520[ 2.299127] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
521[ 2.299136] usb 4-2: Product: USB Multimedia Keyboard
522[ 2.299144] usb 4-2: Manufacturer: LITEON Technology
523[ 2.304052] hidraw: raw HID events driver (C) Jiri Kosina
524[ 2.310421] usbcore: registered new interface driver usbhid
525[ 2.310429] usbhid: USB HID core driver
526[ 2.312521] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/0003:046D:C312.0001/input/input2
527[ 2.312648] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0
528[ 2.434892] usb 3-3: new low-speed USB device number 2 using ohci-pci
529[ 2.601335] usb 3-3: New USB device found, idVendor=1241, idProduct=1122
530[ 2.601346] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
531[ 2.611994] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:1241:1122.0002/input/input3
532[ 2.612400] hid-generic 0003:1241:1122.0002: input,hidraw1: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-3/input0
533[ 2.995230] Switched to clocksource tsc
534[ 5.618378] NET: Registered protocol family 38
535[ 6.007474] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
536[ 6.055747] random: nonblocking pool is initialized
537[ 6.992103] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
538[ 6.992245] systemd[1]: Found ordering cycle on basic.target/start
539[ 6.992254] systemd[1]: Found dependency on sysinit.target/start
540[ 6.992262] systemd[1]: Found dependency on rpcbind.service/start
541[ 6.992270] systemd[1]: Found dependency on network-online.target/start
542[ 6.992277] systemd[1]: Found dependency on network.target/start
543[ 6.992283] systemd[1]: Found dependency on systemd-networkd.service/start
544[ 6.992289] systemd[1]: Found dependency on dbus.service/start
545[ 6.992295] systemd[1]: Found dependency on basic.target/start
546[ 6.992302] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
547[ 6.992310] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
548[ 8.164112] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
549[ 8.375501] lp: driver loaded but no devices found
550[ 8.390155] ppdev: user-space parallel port driver
551[ 8.397845] parport0: PC-style at 0x378 [PCSPP,EPP]
552[ 8.397860] parport0: irq 0 detected
553[ 8.439960] systemd-udevd[236]: starting version 215
554[ 8.495146] lp0: using parport0 (polling).
555[ 8.511036] fuse init (API version 7.23)
556[ 8.563153] w83627ehf: Found NCT6775F chip at 0x290
557[ 8.911979] ACPI: acpi_idle registered with cpuidle
558[ 8.935379] acpi-cpufreq: overriding BIOS provided _PSD data
559[ 8.951644] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
560[ 8.951658] ACPI: Power Button [PWRB]
561[ 8.951774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
562[ 8.951780] ACPI: Power Button [PWRF]
563[ 8.974739] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
564[ 8.974899] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
565[ 8.996541] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
566[ 9.002497] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
567[ 9.002678] sp5100_tco: PCI Revision ID: 0x42
568[ 9.002793] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
569[ 9.002807] sp5100_tco: Last reboot was not triggered by watchdog.
570[ 9.003371] sp5100_tco: initialized (0xf7e38b00). heartbeat=60 sec (nowayout=0)
571[ 9.012050] [drm] Initialized drm 1.1.0 20060810
572[ 9.074107] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
573[ 9.092501] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
574[ 9.159779] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
575[ 9.171471] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
576[ 9.172008] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
577[ 9.172014] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
578[ 9.172024] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
579[ 9.172028] sound hdaudioC1D0: mono: mono_out=0x0
580[ 9.172032] sound hdaudioC1D0: dig-out=0x1e/0x0
581[ 9.172036] sound hdaudioC1D0: inputs:
582[ 9.172041] sound hdaudioC1D0: Rear Mic=0x18
583[ 9.172046] sound hdaudioC1D0: Front Mic=0x19
584[ 9.172050] sound hdaudioC1D0: Line=0x1a
585[ 9.172054] sound hdaudioC1D0: CD=0x1c
586[ 9.187447] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input7
587[ 9.187865] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
588[ 9.187941] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
589[ 9.188019] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
590[ 9.188099] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
591[ 9.188177] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
592[ 9.188256] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
593[ 9.188342] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
594[ 9.188420] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
595[ 9.347464] kvm: Nested Virtualization enabled
596[ 9.347476] kvm: Nested Paging enabled
597[ 9.402865] systemd-udevd[288]: renamed network interface eth0 to eth10
598[ 9.451789] [drm] radeon kernel modesetting enabled.
599[ 9.665722] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
600[ 9.665756] [drm] register mmio base: 0xF0100000
601[ 9.665759] [drm] register mmio size: 262144
602[ 9.665864] ATOM BIOS: AMD
603[ 9.665965] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
604[ 9.665971] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
605[ 9.665976] [drm] Detected VRAM RAM=384M, BAR=256M
606[ 9.665979] [drm] RAM width 32bits DDR
607[ 9.674675] [TTM] Zone kernel: Available graphics memory: 414592 kiB
608[ 9.674685] [TTM] Zone highmem: Available graphics memory: 3950270 kiB
609[ 9.674688] [TTM] Initializing pool allocator
610[ 9.674703] [TTM] Initializing DMA pool allocator
611[ 9.674758] [drm] radeon: 384M of VRAM memory ready
612[ 9.674763] [drm] radeon: 1024M of GTT memory ready.
613[ 9.674798] [drm] Loading PALM Microcode
614[ 9.712625] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
615[ 9.731998] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
616[ 9.736072] r8712u: Staging version
617[ 9.736122] r8712u: register rtl8712_netdev_ops to netdev_ops
618[ 9.736138] usb 2-1: r8712u: USB_SPEED_HIGH with 4 endpoints
619[ 9.738034] usb 2-1: r8712u: Boot from EFUSE: Autoload OK
620[ 9.740749] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
621[ 9.756283] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
622[ 9.756305] [drm] Internal thermal controller without fan control
623[ 9.756434] [drm] Found smc ucode version: 0x00010601
624[ 9.756529] [drm] radeon: dpm initialized
625[ 9.770533] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
626[ 9.770724] [drm] GART: num cpu pages 262144, num gpu pages 262144
627[ 9.796368] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
628[ 9.796624] radeon 0000:00:01.0: WB enabled
629[ 9.796632] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xff6ccc00
630[ 9.796637] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xff6ccc0c
631[ 9.798562] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8732118
632[ 9.798568] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
633[ 9.798617] [drm] Driver supports precise vblank timestamp query.
634[ 9.798622] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
635[ 9.800402] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
636[ 9.800427] radeon 0000:00:01.0: radeon: using MSI.
637[ 9.800468] [drm] radeon: irq initialized.
638[ 9.817675] [drm] ring test on 0 succeeded in 1 usecs
639[ 9.817686] [drm] ring test on 3 succeeded in 3 usecs
640[ 9.873679] [drm] ring test on 5 succeeded in 1 usecs
641[ 9.895439] [drm] UVD initialized successfully.
642[ 9.895775] [drm] ib test on ring 0 succeeded in 0 usecs
643[ 9.895811] [drm] ib test on ring 3 succeeded in 0 usecs
644[ 9.916619] [drm] ib test on ring 5 succeeded
645[ 9.938252] [drm] Radeon Display Connectors
646[ 9.938260] [drm] Connector 0:
647[ 9.938262] [drm] HDMI-A-1
648[ 9.938265] [drm] HPD1
649[ 9.938269] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
650[ 9.938272] [drm] Encoders:
651[ 9.938275] [drm] DFP1: INTERNAL_UNIPHY
652[ 9.938277] [drm] Connector 1:
653[ 9.938279] [drm] HDMI-A-2
654[ 9.938281] [drm] HPD2
655[ 9.938285] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
656[ 9.938287] [drm] Encoders:
657[ 9.938289] [drm] DFP2: INTERNAL_UNIPHY
658[ 9.938291] [drm] Connector 2:
659[ 9.938293] [drm] VGA-1
660[ 9.938297] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
661[ 9.938299] [drm] Encoders:
662[ 9.938301] [drm] CRT1: INTERNAL_KLDSCP_DAC1
663[ 9.976697] [drm] fb mappable at 0xE0477000
664[ 9.976703] [drm] vram apper at 0xE0000000
665[ 9.976706] [drm] size 5242880
666[ 9.976708] [drm] fb depth is 24
667[ 9.976710] [drm] pitch is 5120
668[ 9.976903] fbcon: radeondrmfb (fb0) is primary device
669[ 10.015461] Console: switching to colour frame buffer device 160x64
670[ 10.025515] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
671[ 10.025520] radeon 0000:00:01.0: registered panic notifier
672[ 10.027374] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
673[ 10.320809] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
674[ 10.451074] systemd-journald[223]: Received request to flush runtime journal from PID 1
675[ 10.497614] usb 2-1: r8712u: CustomerID = 0x000a
676[ 10.497626] usb 2-1: r8712u: MAC Address from efuse = 24:05:0f:36:2a:d8
677[ 10.497632] usb 2-1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
678[ 10.497725] usbcore: registered new interface driver r8712u
679[ 10.511311] usb 2-1: firmware: direct-loading firmware rtlwifi/rtl8712u.bin
680[ 10.528107] systemd-udevd[281]: renamed network interface wlan0 to wlan6
681[ 12.053116] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
682[ 12.194482] r8169 0000:03:00.0 eth10: link down
683[ 12.194720] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
684[ 48.703284] r8712u 2-1:1.0 wlan6: 1 RCR=0x153f00e
685[ 48.704195] r8712u 2-1:1.0 wlan6: 2 RCR=0x553f00e
686[ 48.811131] IPv6: ADDRCONF(NETDEV_UP): wlan6: link is not ready