| Warning: Permanently added '192.168.0.8' (ECDSA) to the list of known hosts.
|
| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 4.4.14-smp (root@hive) (gcc version 5.3.0 (GCC) ) #2 SMP Fri Jun 24 14:44:24 CDT 2016 |
| [ 0.000000] x86/fpu: Legacy x87 FPU detected. |
| [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffe3fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000001ffe4000-0x000000001fffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved |
| [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS P2B-LS/P2B-LS, BIOS 4.6-1437-ga097fb8fff 09/13/2017 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x1ffe4 max_arch_pfn = 0x1000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask FE0000000 write-back |
| [ 0.000000] 1 base 0F0000000 mask FFF800000 write-combining |
| [ 0.000000] 2 disabled |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] x86/PAT: PAT not supported by CPU. |
| [ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff] |
| [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 |
| [ 0.000000] BRK [0x0224c000, 0x0224cfff] PGTABLE |
| [ 0.000000] BRK [0x0224d000, 0x0224efff] PGTABLE |
| [ 0.000000] BRK [0x0224f000, 0x0224ffff] PGTABLE |
| [ 0.000000] BRK [0x02250000, 0x02250fff] PGTABLE |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20150930/tbxfroot-243) |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffe3fff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x1ffe2000-0x1ffe3fff] |
| [ 0.000000] 0MB HIGHMEM available. |
| [ 0.000000] 511MB LOWMEM available. |
| [ 0.000000] max_low_pfn = 1ffe4, highstart_pfn = 1ffe4 |
| [ 0.000000] Low memory ends at vaddr dffe4000 |
| [ 0.000000] High memory starts at vaddr dffe4000 |
| [ 0.000000] mapped low ram: 0 - 1ffe4000 |
| [ 0.000000] low ram: 0 - 1ffe4000 |
| [ 0.000000] Node: 0, start_pfn: 1, end_pfn: 9f |
| [ 0.000000] Setting physnode_map array to node 0 for pfns: |
| [ 0.000000] 0 |
| [ 0.000000] Node: 0, start_pfn: 100, end_pfn: 1ffe4 |
| [ 0.000000] Setting physnode_map array to node 0 for pfns: |
| [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffe3fff] |
| [ 0.000000] HighMem empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffe3fff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffe3fff] |
| [ 0.000000] On node 0 totalpages: 130946 |
| [ 0.000000] free_area_init_node: node 0, pgdat dffe2000, node_mem_map dfae2028 |
| [ 0.000000] DMA zone: 40 pages used for memmap |
| [ 0.000000] DMA zone: 0 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] Normal zone: 1240 pages used for memmap |
| [ 0.000000] Normal zone: 126948 pages, LIFO batch:31 |
| [ 0.000000] Using APIC driver default |
| [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org |
| [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs |
| [ 0.000000] Found and enabled local APIC! |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 18 pages/cpu @dfacc000 s42636 r0 d31092 u73728 |
| [ 0.000000] pcpu-alloc: s42636 r0 d31092 u73728 alloc=18*4096 |
| [ 0.000000] pcpu-alloc: [0] 0 |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129666 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=801 vt.default_utf8=0 |
| [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) |
| [ 0.000000] Initializing CPU#0 |
| [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) |
| [ 0.000000] Memory: 499348K/523784K available (12341K kernel code, 927K rwdata, 3824K rodata, 832K init, 676K bss, 24436K reserved, 0K cma-reserved, 0K highmem) |
| [ 0.000000] virtual kernel memory layout: |
| fixmap : 0xffd37000 - 0xfffff000 (2848 kB) |
| pkmap : 0xffa00000 - 0xffc00000 (2048 kB) |
| vmalloc : 0xe07e4000 - 0xff9fe000 ( 498 MB) |
| lowmem : 0xc0000000 - 0xdffe4000 ( 511 MB) |
| .init : 0xc20b4000 - 0xc2184000 ( 832 kB) |
| .data : 0xc1c0d8e3 - 0xc20b2d80 (4757 kB) |
| .text : 0xc1000000 - 0xc1c0d8e3 (12342 kB) |
| [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] Build-time adjustment of leaf fanout to 32. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 |
| [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 |
| [ 0.000000] CPU 0 irqstacks, hard=df424000 soft=df426000 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1002.360 MHz processor |
| [ 0.002010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2004.72 BogoMIPS (lpj=1002360) |
| [ 0.003281] pid_max: default: 32768 minimum: 301 |
| [ 0.003510] Security Framework initialized |
| [ 0.003696] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| [ 0.003843] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| [ 0.004997] Initializing cgroup subsys io |
| [ 0.005206] Initializing cgroup subsys memory |
| [ 0.005398] Initializing cgroup subsys devices |
| [ 0.005554] Initializing cgroup subsys freezer |
| [ 0.005705] Initializing cgroup subsys net_cls |
| [ 0.005855] Initializing cgroup subsys perf_event |
| [ 0.006022] Initializing cgroup subsys net_prio |
| [ 0.006174] Initializing cgroup subsys pids |
| [ 0.006429] mce: CPU supports 5 MCE banks |
| [ 0.006623] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2 |
| [ 0.006768] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 |
| [ 0.031768] Freeing SMP alternatives memory: 40K (c2184000 - c218e000) |
| [ 0.031951] ftrace: allocating 41039 entries in 81 pages |
| [ 0.065601] smpboot: weird, boot CPU (#0) not listed by the BIOS |
| [ 0.065769] smpboot: SMP motherboard not detected |
| [ 0.066029] smpboot: SMP disabled |
| [ 0.066171] Enabling APIC mode: Flat. Using 0 I/O APICs |
| [ 0.168154] Performance Events: p6 PMU driver. |
| [ 0.168345] ... version: 0 |
| [ 0.168477] ... bit width: 32 |
| [ 0.168613] ... generic registers: 2 |
| [ 0.168748] ... value mask: 00000000ffffffff |
| [ 0.168882] ... max period: 000000007fffffff |
| [ 0.169000] ... fixed-purpose events: 0 |
| [ 0.169009] ... event mask: 0000000000000003 |
| [ 0.170288] x86: Booted up 1 node, 1 CPUs |
| [ 0.170414] smpboot: Total of 1 processors activated (2004.72 BogoMIPS) |
| [ 0.171119] devtmpfs: initialized |
| [ 0.172887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.173365] xor: measuring software checksum speed |
| [ 0.183009] pIII_sse : 2096.000 MB/sec |
| [ 0.193007] prefetch64-sse: 2228.000 MB/sec |
| [ 0.193143] xor: using function: prefetch64-sse (2228.000 MB/sec) |
| [ 0.193327] atomic64_test: passed for i586+ platform with CX8 and with SSE |
| [ 0.193473] pinctrl core: initialized pinctrl subsystem |
| [ 0.194551] NET: Registered protocol family 16 |
| [ 0.195516] cpuidle: using governor ladder |
| [ 0.195665] cpuidle: using governor menu |
| [ 0.197532] PCI: PCI BIOS revision 2.10 entry at 0xfd4d9, last bus=1 |
| [ 0.197687] PCI: Using configuration type 1 for base access |
| [ 0.234015] raid6: mmxx1 gen() 949 MB/s |
| [ 0.251015] raid6: mmxx2 gen() 1125 MB/s |
| [ 0.268020] raid6: sse1x1 gen() 851 MB/s |
| [ 0.285036] raid6: sse1x2 gen() 1128 MB/s |
| [ 0.285140] raid6: using algorithm sse1x2 gen() 1128 MB/s |
| [ 0.285245] raid6: using intx1 recovery algorithm |
| [ 0.285576] ACPI: Interpreter disabled. |
| [ 0.285950] vgaarb: loaded |
| [ 0.286519] SCSI subsystem initialized |
| [ 0.286868] libata version 3.00 loaded. |
| [ 0.287109] usbcore: registered new interface driver usbfs |
| [ 0.287324] usbcore: registered new interface driver hub |
| [ 0.287512] usbcore: registered new device driver usb |
| [ 0.288182] PCI: Probing PCI hardware |
| [ 0.288332] PCI: root bus 00: using default resources |
| [ 0.288339] PCI: Probing PCI hardware (bus 00) |
| [ 0.288450] PCI host bridge to bus 0000:00 |
| [ 0.288598] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] |
| [ 0.288743] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] |
| [ 0.288884] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] |
| [ 0.289045] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000 |
| [ 0.289075] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.289278] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400 |
| [ 0.289426] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100 |
| [ 0.289627] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180 |
| [ 0.289682] pci 0000:00:04.1: reg 0x20: [io 0x1840-0x184f] |
| [ 0.289710] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.290010] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.290155] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.290295] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.290560] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300 |
| [ 0.290616] pci 0000:00:04.2: reg 0x20: [io 0x1800-0x181f] |
| [ 0.290777] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000 |
| [ 0.290788] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, |
| * this clock source is slow. Consider trying other clock sources |
| [ 0.291081] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI |
| [ 0.291323] pci 0000:00:04.3: quirk: [io 0x0f00-0x0f0f] claimed by PIIX4 SMB |
| [ 0.291643] pci 0000:00:06.0: [9005:001f] type 00 class 0x010000 |
| [ 0.291674] pci 0000:00:06.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.291694] pci 0000:00:06.0: reg 0x14: [mem 0xf0a34000-0xf0a34fff 64bit] |
| [ 0.291732] pci 0000:00:06.0: reg 0x30: [mem 0xf0a00000-0xf0a1ffff pref] |
| [ 0.292028] pci 0000:00:07.0: [8086:1229] type 00 class 0x020000 |
| [ 0.292058] pci 0000:00:07.0: reg 0x10: [mem 0xf0a35000-0xf0a35fff pref] |
| [ 0.292073] pci 0000:00:07.0: reg 0x14: [io 0x1820-0x183f] |
| [ 0.292089] pci 0000:00:07.0: reg 0x18: [mem 0xf0800000-0xf08fffff] |
| [ 0.292125] pci 0000:00:07.0: reg 0x30: [mem 0xf0900000-0xf09fffff pref] |
| [ 0.292153] pci 0000:00:07.0: supports D1 D2 |
| [ 0.292161] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.292321] pci 0000:00:09.0: [102b:0519] type 00 class 0x030000 |
| [ 0.292345] pci 0000:00:09.0: reg 0x10: [mem 0xf0a30000-0xf0a33fff] |
| [ 0.292361] pci 0000:00:09.0: reg 0x14: [mem 0xf0000000-0xf07fffff pref] |
| [ 0.292405] pci 0000:00:09.0: reg 0x30: [mem 0xf0a20000-0xf0a2ffff pref] |
| [ 0.292507] vgaarb: setting as boot device: PCI:0000:00:09.0 |
| [ 0.292654] vgaarb: device added: PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.292922] pci 0000:00:0a.0: [1039:0111] type 00 class 0x040100 |
| [ 0.292951] pci 0000:00:0a.0: reg 0x10: [mem 0x00000000-0x000000ff] |
| [ 0.293270] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.293430] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 |
| [ 0.293513] pci 0000:00:04.0: PIIX/ICH IRQ router [8086:7110] |
| [ 0.293688] PCI: pci_cache_line_size set to 32 bytes |
| [ 0.293740] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.293749] e820: reserve RAM buffer [mem 0x1ffe4000-0x1fffffff] |
| [ 0.294778] clocksource: Switched to clocksource refined-jiffies |
| [ 0.349405] pnp: PnP ACPI: disabled |
| [ 0.356195] pci 0000:00:0a.0: BAR 0: assigned [mem 0x20000000-0x200000ff] |
| [ 0.356334] pci 0000:00:0a.0: BAR 0: error updating (0x20000000 != 0x000001) |
| [ 0.356449] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.356609] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] |
| [ 0.356617] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] |
| [ 0.356761] NET: Registered protocol family 2 |
| [ 0.357735] TCP established hash table entries: 4096 (order: 2, 16384 bytes) |
| [ 0.357962] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.358131] TCP: Hash tables configured (established 4096 bind 4096) |
| [ 0.358431] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| [ 0.358605] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| [ 0.359171] NET: Registered protocol family 1 |
| [ 0.359730] RPC: Registered named UNIX socket transport module. |
| [ 0.359889] RPC: Registered udp transport module. |
| [ 0.360008] RPC: Registered tcp transport module. |
| [ 0.360146] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.360326] pci 0000:00:00.0: Limiting direct PCI/PCI transfers |
| [ 0.361049] PCI: setting IRQ 5 as level-triggered |
| [ 0.361060] pci 0000:00:04.2: assigned PCI INT D -> IRQ 5 |
| [ 0.362013] pci 0000:00:04.2: sharing IRQ 5 with 0000:00:06.0 |
| [ 0.362156] pci 0000:00:04.2: sharing IRQ 5 with 0000:00:09.0 |
| [ 0.362417] pci 0000:00:07.0: Firmware left e100 interrupts enabled; disabling |
| [ 0.362667] pci 0000:00:09.0: Video device with shadowed ROM |
| [ 0.362679] PCI: CLS 64 bytes, default 32 |
| [ 0.363573] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 0.365367] futex hash table entries: 256 (order: 2, 16384 bytes) |
| [ 0.365606] audit: initializing netlink subsys (disabled) |
| [ 0.365802] audit: type=2000 audit(1981334610.364:1): initialized |
| [ 0.366398] Initialise system trusted keyring |
| [ 0.374365] VFS: Disk quotas dquot_6.6.0 |
| [ 0.374689] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.377181] NFS: Registering the id_resolver key type |
| [ 0.377386] Key type id_resolver registered |
| [ 0.377524] Key type id_legacy registered |
| [ 0.377672] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 0.378583] ntfs: driver 2.1.32 [Flags: R/W]. |
| [ 0.379006] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. |
| [ 0.379490] JFS: nTxBlock = 3901, nTxLock = 31211 |
| [ 0.388885] SGI XFS with ACLs, security attributes, no debug enabled |
| [ 0.390771] ocfs2: Registered cluster interface o2cb |
| [ 0.391232] OCFS2 User DLM kernel interface loaded |
| [ 0.398800] async_tx: api initialized (async) |
| [ 0.399127] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.399546] io scheduler noop registered |
| [ 0.399688] io scheduler deadline registered |
| [ 0.399871] io scheduler cfq registered (default) |
| [ 0.400459] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.400625] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.400842] intel_idle: does not run on family 6 model 11 |
| [ 0.400928] isapnp: Scanning for PnP cards... |
| [ 0.758101] isapnp: No Plug & Play device found |
| [ 0.763335] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.007968] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.252931] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.257522] Floppy drive(s): fd1 is 360K PC |
| [ 1.269916] brd: module loaded |
| [ 1.270057] HP CISS Driver (v 3.6.26) |
| [ 1.271449] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17a |
| [ 1.271907] fnic: Successfully Initialized Trace Buffer |
| [ 1.275091] FDC 0 is a post-1991 82077 |
| [ 1.275428] fnic: Successfully Initialized FC_CTLR Trace Buffer |
| [ 1.280353] aic7xxx 0000:00:06.0: found PCI INT A -> IRQ 5 |
| [ 1.280529] aic7xxx 0000:00:06.0: sharing IRQ 5 with 0000:00:04.2 |
| [ 1.280680] aic7xxx 0000:00:06.0: sharing IRQ 5 with 0000:00:09.0 |
| [ 1.490817] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe72cc80277, max_idle_ns: 440795236781 ns |
| [ 1.491131] clocksource: Switched to clocksource tsc |
| [ 16.487360] scsi host2: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 |
| <Adaptec aic7890/91 Ultra2 SCSI adapter> |
| aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs |
| |
| [ 20.338209] Adaptec aacraid driver 1.2-1[41010]-ms |
| [ 20.338485] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded |
| [ 20.338903] scsi: <fdomain> Detection failed (no card) |
| [ 20.339061] sym53c416.c: Version 1.0.0-ac |
| [ 20.339231] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options |
| [ 20.339523] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k. |
| [ 20.339939] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0. |
| [ 20.340080] Copyright(c) 2004-2015 Emulex. All rights reserved. |
| [ 20.340561] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0 |
| [ 20.362264] Failed initialization of WD-7000 SCSI card! |
| [ 20.435631] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) |
| [ 20.436010] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) |
| [ 20.436202] megasas: 06.808.16.00-rc1 |
| [ 20.436428] mpt3sas version 09.102.00.00 loaded |
| [ 20.436870] GDT-HA: Storage RAID Controller Driver. Version: 3.05 |
| [ 20.437141] 3ware Storage Controller device driver for Linux v1.26.02.003. |
| [ 20.437358] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. |
| [ 20.437645] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. |
| [ 20.437940] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015) |
| [ 20.438238] RocketRAID 3xxx/4xxx Controller driver v1.10.0 |
| [ 20.438425] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 |
| [ 20.438849] st: Version 20101219, fixed bufsize 32768, s/g segs 256 |
| [ 20.439905] ata_piix 0000:00:04.1: version 2.13 |
| [ 20.441351] scsi host3: ata_piix |
| [ 20.441859] scsi host4: ata_piix |
| [ 20.442160] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840 irq 14 |
| [ 20.442331] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1848 irq 15 |
| [ 20.445952] Fusion MPT base driver 3.04.20 |
| [ 20.446070] Copyright (c) 1999-2008 LSI Corporation |
| [ 20.446192] Fusion MPT SPI Host driver 3.04.20 |
| [ 20.446414] Fusion MPT FC Host driver 3.04.20 |
| [ 20.446628] Fusion MPT SAS Host driver 3.04.20 |
| [ 20.446848] Fusion MPT misc device (ioctl) driver 3.04.20 |
| [ 20.447176] mptctl: Registered with Fusion MPT base driver |
| [ 20.447335] mptctl: /dev/mptctl @ (major,minor=10,220) |
| [ 20.447477] Fusion MPT LAN driver 3.04.20 |
| [ 20.447897] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| [ 20.450518] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 20.450678] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 20.451381] mousedev: PS/2 mouse device common for all mice |
| [ 20.451944] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 20.452123] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram |
| [ 20.452356] md: linear personality registered for level -1 |
| [ 20.452501] md: raid0 personality registered for level 0 |
| [ 20.452642] md: raid1 personality registered for level 1 |
| [ 20.452783] md: raid10 personality registered for level 10 |
| [ 20.453148] md: raid6 personality registered for level 6 |
| [ 20.453319] md: raid5 personality registered for level 5 |
| [ 20.453457] md: raid4 personality registered for level 4 |
| [ 20.453611] md: multipath personality registered for level -4 |
| [ 20.453943] device-mapper: uevent: version 1.0.3 |
| [ 20.454411] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com |
| [ 20.455186] input: Speakup as /devices/virtual/input/input1 |
| [ 20.455628] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) |
| [ 20.455866] speakup 3.1.6: initialized |
| [ 20.456026] synth name on entry is: (null) |
| [ 20.456649] Initializing XFRM netlink socket |
| [ 20.456820] NET: Registered protocol family 17 |
| [ 20.457071] 9pnet: Installing 9P2000 support |
| [ 20.457393] Key type dns_resolver registered |
| [ 20.458386] microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x1c |
| [ 20.458656] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 20.458938] Using IPI No-Shortcut mode |
| [ 20.459568] registered taskstats version 1 |
| [ 20.459698] Loading compiled-in X.509 certificates |
| [ 20.461690] Btrfs loaded |
| [ 20.462954] Key type encrypted registered |
| [ 20.475187] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 20.598783] ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133 |
| [ 20.598948] ata1.00: 80293248 sectors, multi 0: LBA |
| [ 20.602489] ata1.00: configured for UDMA/33 |
| [ 20.603134] scsi 3:0:0:0: Direct-Access ATA Maxtor 6E040L0 1590 PQ: 0 ANSI: 5 |
| [ 20.604063] sd 3:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.3 GiB) |
| [ 20.604497] sd 3:0:0:0: [sda] Write Protect is off |
| [ 20.604643] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 20.604716] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 20.614506] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33 |
| [ 20.636346] ata2.01: configured for UDMA/33 |
| [ 20.643938] scsi 4:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5 |
| [ 20.648872] sda: sda1 sda2 < sda5 > |
| [ 20.650339] sd 3:0:0:0: [sda] Attached SCSI disk |
| [ 20.673280] sr 4:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray |
| [ 20.673477] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| [ 20.674204] sr 4:0:1:0: Attached scsi CD-ROM sr0 |
| [ 20.674688] md: Waiting for all devices to be available before autodetect |
| [ 20.674848] md: If you don't use raid, use raid=noautodetect |
| [ 20.675808] md: Autodetecting RAID arrays. |
| [ 20.676022] md: Scanned 0 and added 0 devices. |
| [ 20.676192] md: autorun ... |
| [ 20.676330] md: ... autorun DONE. |
| [ 20.711038] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities |
| [ 20.713125] EXT4-fs (sda1): INFO: recovery required on readonly filesystem |
| [ 20.713344] EXT4-fs (sda1): write access will be enabled during recovery |
| [ 21.585123] EXT4-fs (sda1): recovery complete |
| [ 21.609651] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 21.609966] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. |
| [ 21.653750] devtmpfs: mounted |
| [ 21.659144] Freeing unused kernel memory: 832K (c20b4000 - c2184000) |
| [ 21.659643] Write protecting the kernel text: 12344k |
| [ 21.660204] Write protecting the kernel read-only data: 3828k |
| [ 21.869349] random: nonblocking pool is initialized |
| [ 22.882964] loop: module loaded |
| [ 24.948767] udevd[528]: starting eudev-3.1.5 |
| [ 25.865397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 25.896090] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xf00, revision 0 |
| [ 25.900851] ehci-pci: EHCI PCI platform driver |
| [ 25.905531] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 25.905840] uhci_hcd 0000:00:04.2: found PCI INT D -> IRQ 5 |
| [ 25.906007] uhci_hcd 0000:00:04.2: sharing IRQ 5 with 0000:00:06.0 |
| [ 25.906157] uhci_hcd 0000:00:04.2: sharing IRQ 5 with 0000:00:09.0 |
| [ 25.906341] uhci_hcd 0000:00:04.2: UHCI Host Controller |
| [ 25.907245] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 |
| [ 25.907569] uhci_hcd 0000:00:04.2: irq 5, io base 0x00001800 |
| [ 25.908814] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 25.908980] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 25.909226] usb usb1: Product: UHCI Host Controller |
| [ 25.909372] usb usb1: Manufacturer: Linux 4.4.14-smp uhci_hcd |
| [ 25.909515] usb usb1: SerialNumber: 0000:00:04.2 |
| [ 25.912131] hub 1-0:1.0: USB hub found |
| [ 25.912308] hub 1-0:1.0: 2 ports detected |
| [ 25.929106] Linux agpgart interface v0.103 |
| [ 25.943479] agpgart-intel 0000:00:00.0: Intel 440BX Chipset |
| [ 25.981978] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 |
| [ 26.007565] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 26.814758] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI |
| [ 26.814929] e100: Copyright(c) 1999-2006 Intel Corporation |
| [ 26.815201] PCI: setting IRQ 10 as level-triggered |
| [ 26.815216] e100 0000:00:07.0: assigned PCI INT A -> IRQ 10 |
| [ 26.815386] e100 0000:00:07.0: sharing IRQ 10 with 0000:00:0a.0 |
| [ 26.871021] e100 0000:00:07.0 eth0: addr 0xf0a35000, irq 10, MAC addr 00:e0:18:98:11:15 |
| [ 28.562585] e100 0000:00:07.0 eth126: renamed from eth0 |
| [ 28.563385] e100 0000:00:07.0 eth1: renamed from eth126 |
| [ 28.847968] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k |
| [ 28.983952] fuse init (API version 7.23) |
| [ 29.361516] EXT4-fs (sda1): re-mounted. Opts: (null) |
| [ 39.891091] e100 0000:00:07.0 eth1: NIC Link is Up 100 Mbps Full Duplex |
| [ 43.753323] NET: Registered protocol family 10 |