| [ 0.000000] Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff0efff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff0f000-0x000000007fffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008e9fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046f5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 23539LU/23539LU, BIOS CBET4000 4.6-938-gb08d73b845 08/01/2017 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x46f600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.000000] 1 base 0C0000000 mask FE0000000 uncachable |
| [ 0.000000] 2 base 0E0000000 mask FF0000000 write-combining |
| [ 0.000000] 3 base 0F0000000 mask FF0000000 uncachable |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| [ 0.000000] e820: last_pfn = 0x7ff0f max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffff9e0240099000] 99000 size 24576 |
| [ 0.000000] BRK [0x3cd341000, 0x3cd341fff] PGTABLE |
| [ 0.000000] BRK [0x3cd342000, 0x3cd342fff] PGTABLE |
| [ 0.000000] BRK [0x3cd343000, 0x3cd343fff] PGTABLE |
| [ 0.000000] BRK [0x3cd344000, 0x3cd344fff] PGTABLE |
| [ 0.000000] BRK [0x3cd345000, 0x3cd345fff] PGTABLE |
| [ 0.000000] BRK [0x3cd346000, 0x3cd346fff] PGTABLE |
| [ 0.000000] BRK [0x3cd347000, 0x3cd347fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x35743000-0x36b98fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F2030 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000007FF210E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FF24790 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FF21280 00350F (v02 COREv4 COREBOOT 20110725 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x000000007FF21240 000040 |
| [ 0.000000] ACPI: FACS 0x000000007FF21240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FF24890 0018AD (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FF26140 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000007FF26180 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FF261C0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FF26230 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FF282E0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000046f5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x46f5ee000-0x46f5f2fff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000046f5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff0efff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000046f5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046f5fffff] |
| [ 0.000000] On node 0 totalpages: 4125870 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 22 pages reserved |
| [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8125 pages used for memmap |
| [ 0.000000] DMA32 zone: 519951 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 56280 pages used for memmap |
| [ 0.000000] Normal zone: 3601920 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x000000008e9fffff |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7ff0f000-0x7fffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8e9fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0x8ea00000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 37 pages/cpu @ffff9e06af200000 s111512 r8192 d31848 u524288 |
| [ 0.000000] pcpu-alloc: s111512 r8192 d31848 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4061379 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 16142176K/16503480K available (6464K kernel code, 1175K rwdata, 2788K rodata, 1436K init, 684K bss, 361304K reserved, 0K cma-reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] Build-time adjustment of leaf fanout to 64. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.004000] tsc: Detected 2594.015 MHz processor |
| [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.03 BogoMIPS (lpj=10376060) |
| [ 0.004000] pid_max: default: 32768 minimum: 301 |
| [ 0.004000] ACPI: Core revision 20170119 |
| [ 0.009550] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.009590] Security Framework initialized |
| [ 0.009592] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.009597] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.010316] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.014037] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.015736] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.015749] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.015986] CPU: Physical Processor ID: 0 |
| [ 0.015986] CPU: Processor Core ID: 0 |
| [ 0.016011] mce: CPU supports 7 MCE banks |
| [ 0.016018] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.016026] process: using mwait in idle threads |
| [ 0.016029] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.016029] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.016135] Freeing SMP alternatives memory: 24K |
| [ 0.017296] ftrace: allocating 25929 entries in 102 pages |
| [ 0.024073] smpboot: Max logical packages: 2 |
| [ 0.024078] DMAR: Host address width 36 |
| [ 0.024079] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.024088] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.024088] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.024092] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.024093] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.024094] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.024095] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.024371] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.024372] x2apic enabled |
| [ 0.024378] Switched APIC routing to cluster x2apic. |
| [ 0.024826] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.063762] TSC deadline timer enabled |
| [ 0.063766] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.063839] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.063858] ... version: 3 |
| [ 0.063859] ... bit width: 48 |
| [ 0.063859] ... generic registers: 4 |
| [ 0.063860] ... value mask: 0000ffffffffffff |
| [ 0.063860] ... max period: 00007fffffffffff |
| [ 0.063861] ... fixed-purpose events: 3 |
| [ 0.063861] ... event mask: 000000070000000f |
| [ 0.064000] smp: Bringing up secondary CPUs ... |
| [ 0.064000] x86: Booting SMP configuration: |
| [ 0.064000] .... node #0, CPUs: #1 |
| [ 0.142028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.142028] #2 #3 |
| [ 0.302020] smp: Brought up 1 node, 4 CPUs |
| [ 0.302020] smpboot: Total of 4 processors activated (20755.80 BogoMIPS) |
| [ 0.304109] sched_clock: Marking stable (304000000, 0)->(305597214, -1597214) |
| [ 0.304501] devtmpfs: initialized |
| [ 0.304552] x86/mm: Memory block size: 128MB |
| [ 0.307409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.307416] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.307471] pinctrl core: initialized pinctrl subsystem |
| [ 0.307570] NET: Registered protocol family 16 |
| [ 0.307739] cpuidle: using governor ladder |
| [ 0.307762] cpuidle: using governor menu |
| [ 0.307763] PCCT header not found. |
| [ 0.307785] ACPI: bus type PCI registered |
| [ 0.307786] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.307842] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) |
| [ 0.307844] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 |
| [ 0.307851] PCI: Using configuration type 1 for base access |
| [ 0.307880] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.308686] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.308871] ACPI: Added _OSI(Module Device) |
| [ 0.308871] ACPI: Added _OSI(Processor Device) |
| [ 0.308872] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.308873] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.308986] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.310928] ACPI : EC: EC started |
| [ 0.310929] ACPI : EC: interrupt blocked |
| [ 0.310971] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.310972] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.310974] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.310974] ACPI: Interpreter enabled |
| [ 0.310990] ACPI: (supports S0 S3 S4 S5) |
| [ 0.310991] ACPI: Using IOAPIC for interrupt routing |
| [ 0.311007] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.314702] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.314706] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.314750] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.314758] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.314804] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff]) |
| [ 0.314937] PCI host bridge to bus 0000:00 |
| [ 0.314939] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.314940] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.314941] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.314942] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.314943] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.314944] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.314945] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.314946] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.314947] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.314947] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.314948] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.314949] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.314950] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.314951] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.314952] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.314953] pci_bus 0000:00: root bus resource [mem 0x8ea00000-0xf7ffffff window] |
| [ 0.314954] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.314956] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.314962] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.315040] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 |
| [ 0.315068] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.315125] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.315134] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] |
| [ 0.315140] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] |
| [ 0.315144] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f] |
| [ 0.315209] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.315216] pci 0000:00:04.0: reg 0x10: [mem 0xf0630000-0xf0637fff 64bit] |
| [ 0.315303] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.315323] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit] |
| [ 0.315391] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.315424] pci 0000:00:14.0: System wakeup disabled by ACPI |
| [ 0.315457] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.315472] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff] |
| [ 0.315480] pci 0000:00:19.0: reg 0x14: [mem 0xf063c000-0xf063cfff] |
| [ 0.315488] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f] |
| [ 0.315547] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.315604] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.315621] pci 0000:00:1a.0: reg 0x10: [mem 0xf063e000-0xf063e3ff] |
| [ 0.315704] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.315737] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| [ 0.315767] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.315783] pci 0000:00:1b.0: reg 0x10: [mem 0xf0638000-0xf063bfff 64bit] |
| [ 0.315855] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.315892] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| [ 0.315927] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.316053] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.316131] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.316255] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.316334] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.316352] pci 0000:00:1d.0: reg 0x10: [mem 0xf063f000-0xf063f3ff] |
| [ 0.316433] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.316467] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 0.316498] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.316652] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.316668] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887] |
| [ 0.316676] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893] |
| [ 0.316684] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f] |
| [ 0.316692] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897] |
| [ 0.316700] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f] |
| [ 0.316708] pci 0000:00:1f.2: reg 0x24: [mem 0xf063d000-0xf063d7ff] |
| [ 0.316751] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.316808] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.316823] pci 0000:00:1f.3: reg 0x10: [mem 0xf0640000-0xf06400ff 64bit] |
| [ 0.316843] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.316933] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.317021] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000 |
| [ 0.317063] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf041ffff 64bit] |
| [ 0.317155] pci 0000:02:00.0: reg 0x30: [mem 0xf0420000-0xf042ffff pref] |
| [ 0.317277] pci 0000:02:00.0: supports D1 |
| [ 0.317278] pci 0000:02:00.0: PME# supported from D0 D1 D3hot |
| [ 0.329359] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.329365] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff] |
| [ 0.329597] pci 0000:03:00.0: [1180:e823] type 00 class 0x080500 |
| [ 0.329629] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.329665] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf05000ff] |
| [ 0.329974] pci 0000:03:00.0: supports D1 D2 |
| [ 0.329975] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.341510] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.341515] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] |
| [ 0.341630] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.341675] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.341716] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.341758] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.341798] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.341839] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.341880] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.341920] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.342429] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.342488] ACPI : EC: interrupt unblocked |
| [ 0.342494] ACPI : EC: event unblocked |
| [ 0.342500] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.342502] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.342563] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.342565] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.342568] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.342568] vgaarb: loaded |
| [ 0.342628] PCI: Using ACPI for IRQ routing |
| [ 0.344099] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.344348] e820: reserve RAM buffer [mem 0x7ff0f000-0x7fffffff] |
| [ 0.344349] e820: reserve RAM buffer [mem 0x46f600000-0x46fffffff] |
| [ 0.344473] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.344477] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.346500] clocksource: Switched to clocksource hpet |
| [ 0.354594] VFS: Disk quotas dquot_6.6.0 |
| [ 0.354621] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.354693] pnp: PnP ACPI init |
| [ 0.354773] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.354774] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.354776] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.354777] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.354778] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved |
| [ 0.354780] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.354781] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.354782] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.354784] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.354785] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.354788] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.355224] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.355227] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.355259] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.355261] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.355263] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.355280] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.355306] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.355329] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.355350] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.355367] pnp: PnP ACPI: found 7 devices |
| [ 0.361462] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.361496] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.361503] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.361509] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff] |
| [ 0.361520] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.361526] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] |
| [ 0.361539] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.361540] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.361541] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.361542] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.361543] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.361544] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.361545] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.361546] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.361547] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.361548] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.361549] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.361550] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.361551] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.361552] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.361553] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.361554] pci_bus 0000:00: resource 19 [mem 0x8ea00000-0xf7ffffff window] |
| [ 0.361555] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.361556] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff] |
| [ 0.361557] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] |
| [ 0.361648] NET: Registered protocol family 2 |
| [ 0.361805] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.361997] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.362106] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.362137] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.362176] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.362249] NET: Registered protocol family 1 |
| [ 0.362263] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.363004] PCI: CLS 64 bytes, default 64 |
| [ 0.363046] Unpacking initramfs... |
| [ 0.692700] Freeing initrd memory: 20824K |
| [ 0.692741] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.692743] software IO TLB [mem 0x7bf0f000-0x7ff0f000] (64MB) mapped at [ffff9e02bbf0f000-ffff9e02bff0efff] |
| [ 0.693065] audit: initializing netlink subsys (disabled) |
| [ 0.693114] audit: type=2000 audit(1502284244.688:1): state=initialized audit_enabled=0 res=1 |
| [ 0.693396] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.693438] zbud: loaded |
| [ 0.694212] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.694240] io scheduler noop registered |
| [ 0.694241] io scheduler deadline registered |
| [ 0.694254] io scheduler cfq registered (default) |
| [ 0.694255] io scheduler mq-deadline registered |
| [ 0.694945] pcieport 0000:00:01.0: Signaling PME with IRQ 26 |
| [ 0.694968] pcieport 0000:00:1c.0: Signaling PME with IRQ 27 |
| [ 0.694987] pcieport 0000:00:1c.1: Signaling PME with IRQ 28 |
| [ 0.695013] efifb: probing for efifb |
| [ 0.695026] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k |
| [ 0.695027] efifb: mode is 1600x900x32, linelength=6400, pages=1 |
| [ 0.695027] efifb: scrolling: redraw |
| [ 0.695028] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 0.698023] Console: switching to colour frame buffer device 200x56 |
| [ 0.700931] fb0: EFI VGA frame buffer device |
| [ 0.700938] intel_idle: MWAIT substates: 0x21120 |
| [ 0.700939] intel_idle: v0.4.1 model 0x3A |
| [ 0.701066] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.701401] GHES: HEST is not enabled! |
| [ 0.701451] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.701779] Linux agpgart interface v0.103 |
| [ 0.714603] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 0.794872] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.794873] AMD IOMMUv2 functionality not available on this system |
| [ 0.795337] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.797022] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.797027] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.797270] mousedev: PS/2 mouse device common for all mice |
| [ 0.797319] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.797472] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 0.797500] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.797511] intel_pstate: Intel P-state driver initializing |
| [ 0.797781] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.798218] NET: Registered protocol family 10 |
| [ 0.798662] Segment Routing with IPv6 |
| [ 0.798686] mip6: Mobile IPv6 |
| [ 0.798689] NET: Registered protocol family 17 |
| [ 0.798693] mpls_gso: MPLS GSO support |
| [ 0.798709] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.799206] microcode: sig=0x306a9, pf=0x10, revision=0x1b |
| [ 0.799296] microcode: Microcode Update Driver: v2.2. |
| [ 0.799523] registered taskstats version 1 |
| [ 0.799551] zswap: loaded using pool lzo/zbud |
| [ 0.959227] rtc_cmos 00:03: setting system clock to 2017-08-09 13:10:45 UTC (1502284245) |
| [ 0.959277] PM: Hibernation image not present or could not be loaded. |
| [ 0.961466] Freeing unused kernel memory: 1436K |
| [ 0.961468] Write protecting the kernel read-only data: 12288k |
| [ 0.962259] Freeing unused kernel memory: 1712K |
| [ 0.967361] Freeing unused kernel memory: 1308K |
| [ 0.970373] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.056927] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.056928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.057256] PTP clock support registered |
| [ 1.057863] ACPI: bus type USB registered |
| [ 1.057886] usbcore: registered new interface driver usbfs |
| [ 1.057895] usbcore: registered new interface driver hub |
| [ 1.057923] usbcore: registered new device driver usb |
| [ 1.058364] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.058560] ehci-pci: EHCI PCI platform driver |
| [ 1.058721] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.058732] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.058746] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.059287] SCSI subsystem initialized |
| [ 1.060659] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.060660] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.061287] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.061288] sdhci: Copyright(c) Pierre Ossman |
| [ 1.061843] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 1.062462] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.062666] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.062779] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf063e000 |
| [ 1.063154] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 1.063341] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.063342] ACPI: Thermal Zone [THM0] (57 C) |
| [ 1.064494] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.064495] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.064927] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA |
| [ 1.066210] AVX version of gcm_enc/dec engaged. |
| [ 1.066211] AES CTR mode by8 optimization enabled |
| [ 1.066724] libata version 3.00 loaded. |
| [ 1.078575] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.078638] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.078640] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.078642] usb usb1: Product: EHCI Host Controller |
| [ 1.078643] usb usb1: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd |
| [ 1.078644] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.078793] hub 1-0:1.0: USB hub found |
| [ 1.078803] hub 1-0:1.0: 3 ports detected |
| [ 1.079096] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.079103] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.079115] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.083020] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.083111] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf063f000 |
| [ 1.098580] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.098632] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.098633] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.098634] usb usb2: Product: EHCI Host Controller |
| [ 1.098635] usb usb2: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd |
| [ 1.098636] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.098816] hub 2-0:1.0: USB hub found |
| [ 1.098826] hub 2-0:1.0: 3 ports detected |
| [ 1.099095] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.240256] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.365235] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:84:1e:a5 |
| [ 1.365236] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.365291] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.365550] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.365557] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.366679] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930 |
| [ 1.366687] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.367453] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.367454] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.367455] usb usb3: Product: xHCI Host Controller |
| [ 1.367456] usb usb3: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd |
| [ 1.367457] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.367790] hub 3-0:1.0: USB hub found |
| [ 1.367820] hub 3-0:1.0: 4 ports detected |
| [ 1.368215] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.368222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 1.368399] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 1.368400] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.368401] usb usb4: Product: xHCI Host Controller |
| [ 1.368402] usb usb4: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd |
| [ 1.368402] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 1.368569] hub 4-0:1.0: USB hub found |
| [ 1.368594] hub 4-0:1.0: 4 ports detected |
| [ 1.368758] ahci 0000:00:1f.2: version 3.0 |
| [ 1.368939] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.379067] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.379070] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.380166] scsi host0: ahci |
| [ 1.380522] scsi host1: ahci |
| [ 1.380716] scsi host2: ahci |
| [ 1.380888] scsi host3: ahci |
| [ 1.381064] scsi host4: ahci |
| [ 1.381174] scsi host5: ahci |
| [ 1.381224] ata1: SATA max UDMA/133 abar m2048@0xf063d000 port 0xf063d100 irq 31 |
| [ 1.381227] ata2: SATA max UDMA/133 abar m2048@0xf063d000 port 0xf063d180 irq 31 |
| [ 1.381229] ata3: SATA max UDMA/133 abar m2048@0xf063d000 port 0xf063d200 irq 31 |
| [ 1.381230] ata4: DUMMY |
| [ 1.381233] ata5: SATA max UDMA/133 abar m2048@0xf063d000 port 0xf063d300 irq 31 |
| [ 1.381233] ata6: DUMMY |
| [ 1.381461] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.406579] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.426582] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.555007] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.555010] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.555355] hub 1-1:1.0: USB hub found |
| [ 1.555500] hub 1-1:1.0: 6 ports detected |
| [ 1.575006] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.575009] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.575332] hub 2-1:1.0: USB hub found |
| [ 1.575505] hub 2-1:1.0: 8 ports detected |
| [ 1.693295] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.694021] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133 |
| [ 1.694025] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 1.694814] ata1.00: configured for UDMA/133 |
| [ 1.695204] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5 |
| [ 1.698593] tsc: Refined TSC clocksource calibration: 2594.107 MHz |
| [ 1.698603] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns |
| [ 1.771652] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 1.832119] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 1.832129] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 1.842601] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 1.856988] random: fast init done |
| [ 1.862602] usb 2-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 1.869770] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 1.951752] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020 |
| [ 1.951755] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.951757] usb 1-1.3: Product: Biometric Coprocessor |
| [ 1.951759] usb 1-1.3: Manufacturer: Auth |
| [ 1.971017] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=100a |
| [ 1.971021] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.971411] hub 2-1.5:1.0: USB hub found |
| [ 1.971477] hub 2-1.5:1.0: 6 ports detected |
| [ 2.030604] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.041255] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 2.143120] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f |
| [ 2.143124] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.143126] usb 1-1.4: Product: Broadcom Bluetooth Device |
| [ 2.143128] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.143130] usb 1-1.4: SerialNumber: 7CE9D3B7FC24 |
| [ 2.222613] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.338408] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5 |
| [ 2.338412] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.338414] usb 1-1.6: Product: Integrated Camera |
| [ 2.338416] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.357396] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.359769] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133 |
| [ 2.359773] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| [ 2.360389] ata3.00: configured for UDMA/133 |
| [ 2.360638] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5 |
| [ 2.498890] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.696693] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| [ 2.705362] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.709340] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) |
| [ 2.709345] sd 0:0:0:0: [sda] 4096-byte physical blocks |
| [ 2.709368] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.709372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.709408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.709440] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) |
| [ 2.709460] sd 2:0:0:0: [sdb] Write Protect is off |
| [ 2.709463] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.709496] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.713596] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7 |
| [ 2.714419] sd 2:0:0:0: [sdb] Attached SCSI disk |
| [ 2.722884] clocksource: Switched to clocksource tsc |
| [ 2.853484] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 |
| [ 2.854103] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.978634] raid6: sse2x1 gen() 8922 MB/s |
| [ 4.046633] raid6: sse2x1 xor() 6936 MB/s |
| [ 4.114638] raid6: sse2x2 gen() 11091 MB/s |
| [ 4.182636] raid6: sse2x2 xor() 7985 MB/s |
| [ 4.250646] raid6: sse2x4 gen() 13085 MB/s |
| [ 4.318644] raid6: sse2x4 xor() 9663 MB/s |
| [ 4.318645] raid6: using algorithm sse2x4 gen() 13085 MB/s |
| [ 4.318645] raid6: .... xor() 9663 MB/s, rmw enabled |
| [ 4.318646] raid6: using ssse3x2 recovery algorithm |
| [ 4.318859] xor: automatically using best checksumming function avx |
| [ 4.319011] async_tx: api initialized (async) |
| [ 4.332546] Btrfs loaded, crc32c=crc32c-intel |
| [ 5.115761] PM: Starting manual resume from disk |
| [ 5.115767] PM: Hibernation image partition 8:2 present |
| [ 5.115768] PM: Looking for hibernation image. |
| [ 5.115976] PM: Image not found (code -22) |
| [ 5.115978] PM: Hibernation image not present or could not be loaded. |
| [ 5.244376] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) |
| [ 5.376173] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 5.380308] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) |
| [ 5.380409] systemd[1]: Detected architecture x86-64. |
| [ 5.380560] systemd[1]: Set hostname to <universi-mcbk52>. |
| [ 5.508010] random: crng init done |
| [ 5.523339] systemd[1]: Created slice System Slice. |
| [ 5.523463] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 5.523498] systemd[1]: Listening on udev Control Socket. |
| [ 5.523521] systemd[1]: Listening on LVM2 poll daemon socket. |
| [ 5.523691] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. |
| [ 5.524123] systemd[1]: Mounting Temporary Directory... |
| [ 5.524192] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 5.539782] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro |
| [ 5.550218] RPC: Registered named UNIX socket transport module. |
| [ 5.550219] RPC: Registered udp transport module. |
| [ 5.550220] RPC: Registered tcp transport module. |
| [ 5.550220] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 5.553934] lp: driver loaded but no devices found |
| [ 5.558435] ppdev: user-space parallel port driver |
| [ 5.668890] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4 |
| [ 5.668895] ACPI: Sleep Button [SLPB] |
| [ 5.669056] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5 |
| [ 5.669143] ACPI: Lid Switch [LID] |
| [ 5.669199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| [ 5.669202] ACPI: Power Button [PWRF] |
| [ 5.677014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 5.689139] ACPI: Battery Slot [BAT0] (battery present) |
| [ 5.689243] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 5.689389] ACPI: AC Adapter [AC] (on-line) |
| [ 5.724128] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170119/utaddress-247) |
| [ 5.724133] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 5.724136] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247) |
| [ 5.724139] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 5.724140] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247) |
| [ 5.724143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 5.724143] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247) |
| [ 5.724146] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 5.724147] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 5.725269] input: PC Speaker as /devices/platform/pcspkr/input/input7 |
| [ 5.727567] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 5.728623] sd 2:0:0:0: Attached scsi generic sg1 type 0 |
| [ 5.731019] Non-volatile memory driver v1.3 |
| [ 5.744443] [drm] Memory usable by graphics device = 2048M |
| [ 5.744446] checking generic (e0000000 580000) vs hw (e0000000 10000000) |
| [ 5.744447] fb: switching to inteldrmfb from EFI VGA |
| [ 5.744487] Console: switching to colour dummy device 80x25 |
| [ 5.744914] [drm] Replacing VGA console driver |
| [ 5.746156] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| [ 5.746157] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 5.746158] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-938-gb08d73b845, EC G7HT36WW-3.22 |
| [ 5.746159] thinkpad_acpi: Lenovo ThinkPad T430s, model 23539LU |
| [ 5.746729] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 5.746978] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 5.747070] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 5.747071] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 5.750847] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 5.750991] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 5.751760] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 5.751761] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 5.751762] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 5.751763] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 5.752493] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 |
| [ 5.760480] ath: phy0: Killer Wireless card detected |
| [ 5.772093] ath: phy0: ASPM enabled: 0x43 |
| [ 5.772096] ath: EEPROM regdomain: 0x60 |
| [ 5.772097] ath: EEPROM indicates we should expect a direct regpair map |
| [ 5.772098] ath: Country alpha2 being used: 00 |
| [ 5.772099] ath: Regpair used: 0x60 |
| [ 5.778361] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 5.779790] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffab7342040000, irq=17 |
| [ 5.802757] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 5.802759] [drm] Driver supports precise vblank timestamp query. |
| [ 5.803033] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 5.828073] iTCO_vendor_support: vendor-support=0 |
| [ 5.828509] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 5.828552] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 5.828649] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 5.875591] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 |
| [ 5.875747] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 5.877256] acpi device:03: registered as cooling_device4 |
| [ 5.877350] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 |
| [ 5.908976] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 5.908978] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 5.908979] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 5.908979] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 5.908980] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 5.908981] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 5.908982] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 5.908983] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 5.931028] intel_rapl: Found RAPL domain package |
| [ 5.931029] intel_rapl: Found RAPL domain core |
| [ 5.931030] intel_rapl: Found RAPL domain uncore |
| [ 6.002812] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem |
| [ 6.007136] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr |
| [ 6.011883] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 6.290836] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 6.290859] fbcon: inteldrmfb (fb0) is primary device |
| [ 6.294864] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 6.296021] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 6.296151] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 6.296279] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 6.296399] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 6.296511] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 6.299396] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 6.301031] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 6.352727] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS |
| [ 7.275188] media: Linux media interface: v0.10 |
| [ 7.281632] Bluetooth: Core ver 2.22 |
| [ 7.281649] NET: Registered protocol family 31 |
| [ 7.281650] Bluetooth: HCI device and connection manager initialized |
| [ 7.281653] Bluetooth: HCI socket layer initialized |
| [ 7.281655] Bluetooth: L2CAP socket layer initialized |
| [ 7.281660] Bluetooth: SCO socket layer initialized |
| [ 7.282476] Linux video capture interface: v2.00 |
| [ 7.355432] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 7.357900] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 7.357904] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 7.357907] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 7.357910] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 7.358242] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18 |
| [ 7.358528] usbcore: registered new interface driver uvcvideo |
| [ 7.358530] USB Video Class driver (1.1.1) |
| [ 7.360143] usbcore: registered new interface driver btusb |
| [ 7.567965] Console: switching to colour frame buffer device 200x56 |
| [ 7.590830] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 8.017107] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 9.215328] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 9.462591] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 9.522752] systemd-journald[300]: Received request to flush runtime journal from PID 1 |
| [ 9.523022] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 9.570943] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 9.668144] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 9.765588] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 10.206678] nfc: nfc_init: NFC Core ver 0.1 |
| [ 10.206699] NET: Registered protocol family 39 |
| [ 10.233693] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 10.233695] Bluetooth: BNEP filters: protocol multicast |
| [ 10.233699] Bluetooth: BNEP socket layer initialized |
| [ 12.874344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 13.131290] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 13.144395] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 13.155064] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 13.171182] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 13.499998] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 14.703602] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 14.716327] Ebtables v2.0 registered |
| [ 17.295117] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 17.320626] wlan0: authenticate with f8:1a:67:5a:c4:75 |
| [ 17.335184] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3) |
| [ 17.336822] wlan0: authenticated |
| [ 17.339264] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3) |
| [ 17.340836] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=2) |
| [ 17.340969] wlan0: associated |
| [ 17.341015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 17.427648] ath: EEPROM regdomain: 0x809c |
| [ 17.427649] ath: EEPROM indicates we should expect a country code |
| [ 17.427650] ath: doing EEPROM country->regdmn map search |
| [ 17.427650] ath: country maps to regdmn code: 0x52 |
| [ 17.427651] ath: Country alpha2 being used: CN |
| [ 17.427652] ath: Regpair used: 0x52 |
| [ 17.427653] ath: regdomain 0x809c dynamically updated by country IE |
| [ 20.851131] Bluetooth: RFCOMM TTY layer initialized |
| [ 20.851139] Bluetooth: RFCOMM socket layer initialized |
| [ 20.851144] Bluetooth: RFCOMM ver 1.11 |