| [ 0.000000] Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=e003fde5-6992-4a84-89f4-69eba1314d2d ro quiet iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb22fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007fb23000-0x000000007fbfffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 2815H11/2815H11, BIOS CBET4000 4.6-960-g1ac0aa9c1c-dirty 08/02/2017 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 07FC00000 mask FFFC00000 uncachable |
| [ 0.000000] 1 base 080000000 mask FC0000000 uncachable |
| [ 0.000000] 2 base 0C0000000 mask FF0000000 uncachable |
| [ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| [ 0.000000] e820: last_pfn = 0x7fb23 max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f6310-0x000f631f] mapped at [ffff983a400f6310] |
| [ 0.000000] Base memory trampoline at [ffff983a40099000] 99000 size 24576 |
| [ 0.000000] BRK [0x20ed41000, 0x20ed41fff] PGTABLE |
| [ 0.000000] BRK [0x20ed42000, 0x20ed42fff] PGTABLE |
| [ 0.000000] BRK [0x20ed43000, 0x20ed43fff] PGTABLE |
| [ 0.000000] BRK [0x20ed44000, 0x20ed44fff] PGTABLE |
| [ 0.000000] BRK [0x20ed45000, 0x20ed45fff] PGTABLE |
| [ 0.000000] BRK [0x20ed46000, 0x20ed46fff] PGTABLE |
| [ 0.000000] BRK [0x20ed47000, 0x20ed47fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x35c53000-0x36e20fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F64B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000007FB340E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FB37840 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FB34280 0035B5 (v03 COREv4 COREBOOT 20090419 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x000000007FB34240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FB37940 00058D (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FB37ED0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000007FB37F10 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FB37F50 000068 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FB37FC0 000078 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FB38040 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x26fff6000-0x26fffafff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fb22fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000026fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff] |
| [ 0.000000] On node 0 totalpages: 2030274 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 22 pages reserved |
| [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8109 pages used for memmap |
| [ 0.000000] DMA32 zone: 518947 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 23552 pages used for memmap |
| [ 0.000000] Normal zone: 1507328 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7fb23000-0x7fbfffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff] |
| [ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 37 pages/cpu @ffff983cafc00000 s111512 r8192 d31848 u1048576 |
| [ 0.000000] pcpu-alloc: s111512 r8192 d31848 u1048576 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1998527 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=e003fde5-6992-4a84-89f4-69eba1314d2d ro quiet iomem=relaxed |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 7893788K/8121096K available (6464K kernel code, 1175K rwdata, 2788K rodata, 1436K init, 684K bss, 227308K reserved, 0K cma-reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] Build-time adjustment of leaf fanout to 64. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:440 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.004000] tsc: Detected 2533.643 MHz processor |
| [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5067.28 BogoMIPS (lpj=10134572) |
| [ 0.004000] pid_max: default: 32768 minimum: 301 |
| [ 0.004000] ACPI: Core revision 20170119 |
| [ 0.011010] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.011093] Security Framework initialized |
| [ 0.011097] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.011107] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.011975] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.016383] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.018523] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.018539] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.019032] CPU: Physical Processor ID: 0 |
| [ 0.019034] CPU: Processor Core ID: 0 |
| [ 0.019036] mce: CPU supports 6 MCE banks |
| [ 0.019047] CPU0: Thermal monitoring enabled (TM2) |
| [ 0.019052] process: using mwait in idle threads |
| [ 0.019058] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 |
| [ 0.019060] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 |
| [ 0.019250] Freeing SMP alternatives memory: 24K |
| [ 0.024028] ftrace: allocating 25929 entries in 102 pages |
| [ 0.036122] smpboot: Max logical packages: 1 |
| [ 0.036136] DMAR: Host address width 36 |
| [ 0.036138] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.036145] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000 |
| [ 0.036147] DMAR: DRHD base: 0x000000fed91000 flags: 0x0 |
| [ 0.036153] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000 |
| [ 0.036154] DMAR: DRHD base: 0x000000fed93000 flags: 0x1 |
| [ 0.036159] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000 |
| [ 0.036540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.080000] smpboot: CPU0: Intel(R) Core(TM)2 CPU P9600 @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0xa) |
| [ 0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. |
| [ 0.080000] ... version: 2 |
| [ 0.080000] ... bit width: 40 |
| [ 0.080000] ... generic registers: 2 |
| [ 0.080000] ... value mask: 000000ffffffffff |
| [ 0.080000] ... max period: 000000007fffffff |
| [ 0.080000] ... fixed-purpose events: 3 |
| [ 0.080000] ... event mask: 0000000700000003 |
| [ 0.080000] smp: Bringing up secondary CPUs ... |
| [ 0.080000] x86: Booting SMP configuration: |
| [ 0.080000] .... node #0, CPUs: #1 |
| [ 0.166035] smp: Brought up 1 node, 2 CPUs |
| [ 0.166035] smpboot: Total of 2 processors activated (10134.19 BogoMIPS) |
| [ 0.166035] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.168099] sched_clock: Marking stable (168000000, 0)->(284267351, -116267351) |
| [ 0.168636] devtmpfs: initialized |
| [ 0.168730] x86/mm: Memory block size: 128MB |
| [ 0.174160] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.174172] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.174241] pinctrl core: initialized pinctrl subsystem |
| [ 0.174410] NET: Registered protocol family 16 |
| [ 0.174728] cpuidle: using governor ladder |
| [ 0.174768] cpuidle: using governor menu |
| [ 0.174770] PCCT header not found. |
| [ 0.174808] ACPI: bus type PCI registered |
| [ 0.174810] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.174904] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.174908] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.174920] PCI: Using configuration type 1 for base access |
| [ 0.176568] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.176889] ACPI: Added _OSI(Module Device) |
| [ 0.176890] ACPI: Added _OSI(Processor Device) |
| [ 0.176892] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.176893] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.177105] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.178709] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored |
| [ 0.180256] ACPI : EC: EC started |
| [ 0.180257] ACPI : EC: interrupt blocked |
| [ 0.180360] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.180362] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.180365] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.180366] ACPI: Interpreter enabled |
| [ 0.180393] ACPI: (supports S0 S3 S4 S5) |
| [ 0.180395] ACPI: Using IOAPIC for interrupt routing |
| [ 0.180429] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.193719] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1) |
| [ 0.194215] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.194221] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.194295] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.194311] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.194392] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff]) |
| [ 0.194706] PCI host bridge to bus 0000:00 |
| [ 0.194709] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.194712] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.194714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.194717] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.194719] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.194721] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.194723] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.194725] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.194727] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.194729] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.194731] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.194733] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.194735] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.194738] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.194740] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.194742] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window] |
| [ 0.194744] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.194747] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.194759] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 |
| [ 0.194788] DMAR: Forcing write-buffer flush capability |
| [ 0.194789] DMAR: Disabling IOMMU for graphics on this chipset |
| [ 0.194922] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 |
| [ 0.194936] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit] |
| [ 0.194945] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.194952] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407] |
| [ 0.195096] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 |
| [ 0.195108] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit] |
| [ 0.195301] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000 |
| [ 0.195325] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff] |
| [ 0.195337] pci 0000:00:19.0: reg 0x14: [mem 0xe1b24000-0xe1b24fff] |
| [ 0.195349] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f] |
| [ 0.195448] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.195574] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 |
| [ 0.195634] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f] |
| [ 0.195785] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| [ 0.195847] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 |
| [ 0.195907] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f] |
| [ 0.196055] pci 0000:00:1a.1: System wakeup disabled by ACPI |
| [ 0.196116] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 |
| [ 0.196176] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.196322] pci 0000:00:1a.2: System wakeup disabled by ACPI |
| [ 0.196395] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 |
| [ 0.196419] pci 0000:00:1a.7: reg 0x10: [mem 0xe1b26000-0xe1b263ff] |
| [ 0.196532] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold |
| [ 0.196610] pci 0000:00:1a.7: System wakeup disabled by ACPI |
| [ 0.196673] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 |
| [ 0.196699] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b20000-0xe1b23fff 64bit] |
| [ 0.196816] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.196903] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| [ 0.196964] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 |
| [ 0.197081] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.197225] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 |
| [ 0.197340] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.197485] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 |
| [ 0.197592] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.197736] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 |
| [ 0.197853] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.198001] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 |
| [ 0.198062] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f] |
| [ 0.198209] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 0.198269] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 |
| [ 0.198329] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf] |
| [ 0.198475] pci 0000:00:1d.1: System wakeup disabled by ACPI |
| [ 0.198535] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 |
| [ 0.198595] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df] |
| [ 0.198742] pci 0000:00:1d.2: System wakeup disabled by ACPI |
| [ 0.198811] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 |
| [ 0.198836] pci 0000:00:1d.7: reg 0x10: [mem 0xe1b27000-0xe1b273ff] |
| [ 0.198950] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold |
| [ 0.199028] pci 0000:00:1d.7: System wakeup disabled by ACPI |
| [ 0.199087] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 |
| [ 0.199273] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 |
| [ 0.199546] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 |
| [ 0.199571] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f] |
| [ 0.199583] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b] |
| [ 0.199595] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417] |
| [ 0.199607] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f] |
| [ 0.199619] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff] |
| [ 0.199631] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b25000-0xe1b257ff] |
| [ 0.199701] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.199833] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 |
| [ 0.199857] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b28000-0xe1b280ff 64bit] |
| [ 0.199888] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.200136] pci 0000:01:00.0: [168c:0030] type 00 class 0x028000 |
| [ 0.200191] pci 0000:01:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit] |
| [ 0.200306] pci 0000:01:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref] |
| [ 0.200449] pci 0000:01:00.0: supports D1 |
| [ 0.200451] pci 0000:01:00.0: PME# supported from D0 D1 D3hot |
| [ 0.211465] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.211474] pci 0000:00:1c.0: bridge window [mem 0xe1900000-0xe19fffff] |
| [ 0.211583] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000 |
| [ 0.211640] pci 0000:02:00.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff 64bit] |
| [ 0.211760] pci 0000:02:00.0: reg 0x30: [mem 0xe1a20000-0xe1a2ffff pref] |
| [ 0.211912] pci 0000:02:00.0: supports D1 |
| [ 0.211914] pci 0000:02:00.0: PME# supported from D0 D1 D3hot |
| [ 0.223462] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.223471] pci 0000:00:1c.1: bridge window [mem 0xe1a00000-0xe1afffff] |
| [ 0.223552] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.223672] acpiphp: Slot [1] registered |
| [ 0.223715] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 |
| [ 0.223760] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0801fff 64bit] |
| [ 0.223988] pci 0000:04:00.0: PME# supported from D0 D3hot |
| [ 0.224178] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| [ 0.224183] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| [ 0.224188] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.224196] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.224385] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) |
| [ 0.224399] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.224402] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.224404] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) |
| [ 0.224406] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) |
| [ 0.224408] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) |
| [ 0.224411] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode) |
| [ 0.224413] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) |
| [ 0.224415] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) |
| [ 0.224417] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) |
| [ 0.224420] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) |
| [ 0.224422] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) |
| [ 0.224424] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) |
| [ 0.224426] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) |
| [ 0.224429] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) |
| [ 0.224431] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) |
| [ 0.224433] pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode) |
| [ 0.224436] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) |
| [ 0.224649] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.224738] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.224824] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| [ 0.224911] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| [ 0.224996] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.225082] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.225168] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.225257] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.227088] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.227232] ACPI : EC: interrupt unblocked |
| [ 0.227243] ACPI : EC: event unblocked |
| [ 0.227252] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.227254] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.227371] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.227374] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.227384] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.227385] vgaarb: loaded |
| [ 0.227495] PCI: Using ACPI for IRQ routing |
| [ 0.230004] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.230115] e820: reserve RAM buffer [mem 0x7fb23000-0x7fffffff] |
| [ 0.230329] HPET: 4 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.230335] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 |
| [ 0.230341] hpet0: 4 comparators, 64-bit 14.318180 MHz counter |
| [ 0.232419] clocksource: Switched to clocksource hpet |
| [ 0.250737] VFS: Disk quotas dquot_6.6.0 |
| [ 0.250781] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.250913] pnp: PnP ACPI init |
| [ 0.251090] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.251093] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved |
| [ 0.251095] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.251098] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.251101] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.251103] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.251106] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.251109] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.251114] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.251807] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.251812] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.251897] system 00:02: [io 0x0800-0x080f] has been reserved |
| [ 0.251900] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.251902] system 00:02: [io 0x0580-0x05bf] has been reserved |
| [ 0.251907] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.251948] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.252010] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.252061] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.252216] pnp: PnP ACPI: found 6 devices |
| [ 0.259890] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.259954] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.259963] pci 0000:00:1c.0: bridge window [mem 0xe1900000-0xe19fffff] |
| [ 0.259974] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.259981] pci 0000:00:1c.1: bridge window [mem 0xe1a00000-0xe1afffff] |
| [ 0.259992] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.260007] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| [ 0.260011] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| [ 0.260018] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.260023] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.260031] pci 0000:00:1e.0: PCI bridge to [bus 05] |
| [ 0.260047] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.260049] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.260052] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.260054] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.260056] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.260058] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.260060] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.260063] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.260065] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.260067] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.260069] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.260071] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.260073] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.260075] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.260077] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.260079] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window] |
| [ 0.260082] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.260084] pci_bus 0000:01: resource 1 [mem 0xe1900000-0xe19fffff] |
| [ 0.260086] pci_bus 0000:02: resource 1 [mem 0xe1a00000-0xe1afffff] |
| [ 0.260089] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] |
| [ 0.260091] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.260093] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.260095] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.260097] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] |
| [ 0.260100] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.260102] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.260104] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.260106] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.260108] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.260110] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.260112] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.260114] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.260116] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.260118] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.260121] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.260123] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.260125] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.260127] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window] |
| [ 0.260129] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.260273] NET: Registered protocol family 2 |
| [ 0.260557] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.260857] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.261336] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.261401] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.261470] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.261598] NET: Registered protocol family 1 |
| [ 0.261620] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.264241] PCI: CLS 64 bytes, default 64 |
| [ 0.264311] Unpacking initramfs... |
| [ 0.795001] Freeing initrd memory: 18232K |
| [ 0.795202] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.795207] software IO TLB [mem 0x7bb23000-0x7fb23000] (64MB) mapped at [ffff983abbb23000-ffff983abfb22fff] |
| [ 0.795763] audit: initializing netlink subsys (disabled) |
| [ 0.795866] audit: type=2000 audit(1501742705.792:1): state=initialized audit_enabled=0 res=1 |
| [ 0.796401] workingset: timestamp_bits=40 max_order=21 bucket_order=0 |
| [ 0.796430] zbud: loaded |
| [ 0.797625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.797664] io scheduler noop registered |
| [ 0.797666] io scheduler deadline registered |
| [ 0.797684] io scheduler cfq registered (default) |
| [ 0.797686] io scheduler mq-deadline registered |
| [ 0.798954] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 |
| [ 0.798985] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 |
| [ 0.799013] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 |
| [ 0.799051] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 |
| [ 0.799097] efifb: probing for efifb |
| [ 0.799115] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k |
| [ 0.799117] efifb: mode is 1440x900x32, linelength=5760, pages=1 |
| [ 0.799118] efifb: scrolling: redraw |
| [ 0.799120] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 0.803753] Console: switching to colour frame buffer device 180x56 |
| [ 0.808197] fb0: EFI VGA frame buffer device |
| [ 0.808210] intel_idle: does not run on family 6 model 23 |
| [ 0.816661] Monitor-Mwait will be used to enter C-1 state |
| [ 0.816668] Monitor-Mwait will be used to enter C-2 state |
| [ 0.816672] Monitor-Mwait will be used to enter C-3 state |
| [ 0.816676] sched_clock: Marking unstable (816232953, 364118)<-(932864422, -116267351) |
| [ 0.816679] tsc: Marking TSC unstable due to TSC halts in idle |
| [ 0.817070] GHES: HEST is not enabled! |
| [ 0.817197] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.817908] Linux agpgart interface v0.103 |
| [ 0.818141] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.818142] AMD IOMMUv2 functionality not available on this system |
| [ 0.818421] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.830298] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.830304] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.830534] mousedev: PS/2 mouse device common for all mice |
| [ 0.830596] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.830792] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 0.830823] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs |
| [ 0.830877] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.831247] NET: Registered protocol family 10 |
| [ 0.831567] Segment Routing with IPv6 |
| [ 0.831587] mip6: Mobile IPv6 |
| [ 0.831590] NET: Registered protocol family 17 |
| [ 0.831593] mpls_gso: MPLS GSO support |
| [ 0.831829] microcode: sig=0x1067a, pf=0x80, revision=0x0 |
| [ 0.831920] microcode: Microcode Update Driver: v2.2. |
| [ 0.832145] registered taskstats version 1 |
| [ 0.832166] zswap: loaded using pool lzo/zbud |
| [ 0.832305] ima: No TPM chip found, activating TPM-bypass! (rc=-19) |
| [ 0.832834] rtc_cmos 00:03: setting system clock to 2017-08-03 06:45:06 UTC (1501742706) |
| [ 0.832880] PM: Hibernation image not present or could not be loaded. |
| [ 0.835088] Freeing unused kernel memory: 1436K |
| [ 0.835089] Write protecting the kernel read-only data: 12288k |
| [ 0.836018] Freeing unused kernel memory: 1712K |
| [ 0.841041] Freeing unused kernel memory: 1308K |
| [ 0.843476] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.844549] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.928270] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.928271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.928732] ACPI: bus type USB registered |
| [ 0.928768] usbcore: registered new interface driver usbfs |
| [ 0.928783] usbcore: registered new interface driver hub |
| [ 0.929381] PTP clock support registered |
| [ 0.929809] usbcore: registered new device driver usb |
| [ 0.930670] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.931098] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 0.931681] ehci-pci: EHCI PCI platform driver |
| [ 0.931924] ehci-pci 0000:00:1a.7: EHCI Host Controller |
| [ 0.931939] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 |
| [ 0.931957] ehci-pci 0000:00:1a.7: debug port 1 |
| [ 0.935873] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported |
| [ 0.935893] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1b26000 |
| [ 0.937437] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 0.937439] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 0.938064] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 0.938268] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.938270] ACPI: Thermal Zone [THM0] (47 C) |
| [ 0.938902] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 0.938904] ACPI: Thermal Zone [THM1] (42 C) |
| [ 0.950801] SCSI subsystem initialized |
| [ 0.952726] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 |
| [ 0.952789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.952792] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.952794] usb usb1: Product: EHCI Host Controller |
| [ 0.952797] usb usb1: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd |
| [ 0.952798] usb usb1: SerialNumber: 0000:00:1a.7 |
| [ 0.953194] hub 1-0:1.0: USB hub found |
| [ 0.953204] hub 1-0:1.0: 6 ports detected |
| [ 0.953539] xhci_hcd 0000:04:00.0: xHCI Host Controller |
| [ 0.953548] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 |
| [ 0.953784] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 |
| [ 0.954016] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.954018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.954021] usb usb2: Product: xHCI Host Controller |
| [ 0.954023] usb usb2: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd |
| [ 0.954025] usb usb2: SerialNumber: 0000:04:00.0 |
| [ 0.954309] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 0.954500] hub 2-0:1.0: USB hub found |
| [ 0.954577] hub 2-0:1.0: 2 ports detected |
| [ 0.954728] xhci_hcd 0000:04:00.0: xHCI Host Controller |
| [ 0.954734] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 |
| [ 0.957232] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 0.957327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 0.957329] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.957332] usb usb3: Product: xHCI Host Controller |
| [ 0.957334] usb usb3: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd |
| [ 0.957336] usb usb3: SerialNumber: 0000:04:00.0 |
| [ 0.957509] hub 3-0:1.0: USB hub found |
| [ 0.957525] hub 3-0:1.0: 2 ports detected |
| [ 0.964476] libata version 3.00 loaded. |
| [ 1.154942] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:27:13:b5:a4:cc |
| [ 1.154945] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.154974] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF |
| [ 1.155176] uhci_hcd 0000:00:1a.0: UHCI Host Controller |
| [ 1.155185] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4 |
| [ 1.155195] uhci_hcd 0000:00:1a.0: detected 2 ports |
| [ 1.155232] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020 |
| [ 1.155328] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.155331] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.155333] usb usb4: Product: UHCI Host Controller |
| [ 1.155336] usb usb4: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| [ 1.155338] usb usb4: SerialNumber: 0000:00:1a.0 |
| [ 1.155515] hub 4-0:1.0: USB hub found |
| [ 1.155529] hub 4-0:1.0: 2 ports detected |
| [ 1.155821] uhci_hcd 0000:00:1a.1: UHCI Host Controller |
| [ 1.155829] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5 |
| [ 1.155837] uhci_hcd 0000:00:1a.1: detected 2 ports |
| [ 1.155866] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040 |
| [ 1.155953] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.155956] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.155958] usb usb5: Product: UHCI Host Controller |
| [ 1.155960] usb usb5: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| [ 1.155962] usb usb5: SerialNumber: 0000:00:1a.1 |
| [ 1.156227] hub 5-0:1.0: USB hub found |
| [ 1.156326] hub 5-0:1.0: 2 ports detected |
| [ 1.156660] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.157747] ehci-pci 0000:00:1d.7: EHCI Host Controller |
| [ 1.157756] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6 |
| [ 1.157772] ehci-pci 0000:00:1d.7: debug port 1 |
| [ 1.161670] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported |
| [ 1.161676] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1b27000 |
| [ 1.176481] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 |
| [ 1.176545] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.176548] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.176550] usb usb6: Product: EHCI Host Controller |
| [ 1.176552] usb usb6: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd |
| [ 1.176554] usb usb6: SerialNumber: 0000:00:1d.7 |
| [ 1.176748] hub 6-0:1.0: USB hub found |
| [ 1.176758] hub 6-0:1.0: 6 ports detected |
| [ 1.177133] ahci 0000:00:1f.2: version 3.0 |
| [ 1.177365] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.177403] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode |
| [ 1.177406] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc |
| [ 1.179487] scsi host0: ahci |
| [ 1.179647] scsi host1: ahci |
| [ 1.179787] scsi host2: ahci |
| [ 1.179921] scsi host3: ahci |
| [ 1.180057] scsi host4: ahci |
| [ 1.180194] scsi host5: ahci |
| [ 1.180268] ata1: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25100 irq 32 |
| [ 1.180271] ata2: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25180 irq 32 |
| [ 1.180272] ata3: DUMMY |
| [ 1.180273] ata4: DUMMY |
| [ 1.180276] ata5: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25300 irq 32 |
| [ 1.180279] ata6: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25380 irq 32 |
| [ 1.180490] uhci_hcd 0000:00:1a.2: UHCI Host Controller |
| [ 1.180499] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7 |
| [ 1.180508] uhci_hcd 0000:00:1a.2: detected 2 ports |
| [ 1.180531] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060 |
| [ 1.180767] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.180770] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.180772] usb usb7: Product: UHCI Host Controller |
| [ 1.180774] usb usb7: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| [ 1.180776] usb usb7: SerialNumber: 0000:00:1a.2 |
| [ 1.180942] hub 7-0:1.0: USB hub found |
| [ 1.180954] hub 7-0:1.0: 2 ports detected |
| [ 1.181232] uhci_hcd 0000:00:1d.0: UHCI Host Controller |
| [ 1.181239] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8 |
| [ 1.181249] uhci_hcd 0000:00:1d.0: detected 2 ports |
| [ 1.181272] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 |
| [ 1.181380] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.181383] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.181386] usb usb8: Product: UHCI Host Controller |
| [ 1.181388] usb usb8: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| [ 1.181390] usb usb8: SerialNumber: 0000:00:1d.0 |
| [ 1.181576] hub 8-0:1.0: USB hub found |
| [ 1.181588] hub 8-0:1.0: 2 ports detected |
| [ 1.181867] uhci_hcd 0000:00:1d.1: UHCI Host Controller |
| [ 1.181875] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9 |
| [ 1.181886] uhci_hcd 0000:00:1d.1: detected 2 ports |
| [ 1.181909] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0 |
| [ 1.182091] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.182093] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.182096] usb usb9: Product: UHCI Host Controller |
| [ 1.182098] usb usb9: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| [ 1.182100] usb usb9: SerialNumber: 0000:00:1d.1 |
| [ 1.182267] hub 9-0:1.0: USB hub found |
| [ 1.182278] hub 9-0:1.0: 2 ports detected |
| [ 1.182553] uhci_hcd 0000:00:1d.2: UHCI Host Controller |
| [ 1.182561] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 |
| [ 1.182571] uhci_hcd 0000:00:1d.2: detected 2 ports |
| [ 1.182594] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0 |
| [ 1.182739] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.182742] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.182744] usb usb10: Product: UHCI Host Controller |
| [ 1.182747] usb usb10: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| [ 1.182749] usb usb10: SerialNumber: 0000:00:1d.2 |
| [ 1.182914] hub 10-0:1.0: USB hub found |
| [ 1.182926] hub 10-0:1.0: 2 ports detected |
| [ 1.484458] random: fast init done |
| [ 1.484467] usb 5-1: new full-speed USB device number 2 using uhci_hcd |
| [ 1.496046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 1.496270] ata1.00: CFA: LEXAR CFAST 32GB CARD, 20141204, max UDMA/133 |
| [ 1.496272] ata1.00: 62533296 sectors, multi 1: LBA48 |
| [ 1.497043] ata1.00: configured for UDMA/133 |
| [ 1.497320] scsi 0:0:0:0: Direct-Access ATA LEXAR CFAST 32GB 1204 PQ: 0 ANSI: 5 |
| [ 1.664942] usb 5-1: New USB device found, idVendor=147e, idProduct=2016 |
| [ 1.664945] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.664947] usb 5-1: Product: Biometric Coprocessor |
| [ 1.664949] usb 5-1: Manufacturer: UPEK |
| [ 1.772020] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] |
| [ 1.824390] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24855f040d6, max_idle_ns: 440795250642 ns |
| [ 1.844815] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 1.850416] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367 |
| [ 1.850422] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 1.900500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 1.903236] ata2.00: ATA-8: WDC WD7500BPKX-00HPJT0, 01.01A01, max UDMA/133 |
| [ 1.903239] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 1.907248] ata2.00: configured for UDMA/133 |
| [ 1.907464] scsi 1:0:0:0: Direct-Access ATA WDC WD7500BPKX-0 1A01 PQ: 0 ANSI: 5 |
| [ 2.256670] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.404479] usb 5-2: new full-speed USB device number 3 using uhci_hcd |
| [ 2.571988] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 2.576049] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB) |
| [ 2.576052] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 2.576105] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 2.576108] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.576130] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) |
| [ 2.576159] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.576162] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.576175] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.576218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.577744] sda: sda2 sda3 sda4 < sda5 sda6 sda7 > |
| [ 2.578613] sd 0:0:0:0: [sda] Attached SCSI removable disk |
| [ 2.588938] usb 5-2: New USB device found, idVendor=0a5c, idProduct=21e6 |
| [ 2.588941] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.588943] usb 5-2: Product: BCM20702A0 |
| [ 2.588946] usb 5-2: Manufacturer: Broadcom Corp |
| [ 2.588948] usb 5-2: SerialNumber: 2CD05A7F8FF1 |
| [ 2.647103] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.676317] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 |
| [ 2.677115] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 2.910065] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| [ 3.080415] usb 1-6: new high-speed USB device number 4 using ehci-pci |
| [ 3.234094] usb 1-6: New USB device found, idVendor=17ef, idProduct=480d |
| [ 3.234097] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.234099] usb 1-6: Product: Integrated Camera |
| [ 3.234101] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 3.536903] PM: Starting manual resume from disk |
| [ 3.536907] PM: Hibernation image partition 8:18 present |
| [ 3.536908] PM: Looking for hibernation image. |
| [ 3.537087] PM: Image not found (code -22) |
| [ 3.537089] PM: Hibernation image not present or could not be loaded. |
| [ 3.888730] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) |
| [ 4.046678] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 4.054920] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) |
| [ 4.055092] systemd[1]: Detected architecture x86-64. |
| [ 4.055325] systemd[1]: Set hostname to <universi-hp8460>. |
| [ 4.252845] systemd[1]: Created slice User and Session Slice. |
| [ 4.252950] systemd[1]: Listening on udev Control Socket. |
| [ 4.253012] systemd[1]: Listening on Syslog Socket. |
| [ 4.253070] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 4.253134] systemd[1]: Reached target System Time Synchronized. |
| [ 4.253180] systemd[1]: Listening on udev Kernel Socket. |
| [ 4.253287] systemd[1]: Listening on Journal Audit Socket. |
| [ 4.305155] EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro |
| [ 4.309329] RPC: Registered named UNIX socket transport module. |
| [ 4.309330] RPC: Registered udp transport module. |
| [ 4.309331] RPC: Registered tcp transport module. |
| [ 4.309332] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 4.318149] lp: driver loaded but no devices found |
| [ 4.321273] ppdev: user-space parallel port driver |
| [ 4.591443] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input4 |
| [ 4.591449] ACPI: Sleep Button [SLPB] |
| [ 4.591996] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input5 |
| [ 4.600260] ACPI: Lid Switch [LID] |
| [ 4.624557] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| [ 4.624562] ACPI: Power Button [PWRF] |
| [ 4.624944] ACPI: AC Adapter [AC] (on-line) |
| [ 4.625047] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 4.626334] acpi device:04: registered as cooling_device2 |
| [ 4.626389] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 |
| [ 4.646805] ACPI: Battery Slot [BAT0] (battery present) |
| [ 4.646985] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 4.650032] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 4.667589] Non-volatile memory driver v1.3 |
| [ 4.683809] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| [ 4.683810] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 4.683811] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-960-g1ac0aa9c1c-dirty, EC 6HHT15WW-3.8 |
| [ 4.683812] thinkpad_acpi: Lenovo ThinkPad T400s, model 2815H11 |
| [ 4.687777] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 4.688123] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 4.688136] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 4.688137] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 4.692466] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 4.692671] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 4.694146] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 |
| [ 4.717358] ath: phy0: Killer Wireless card detected |
| [ 4.731223] pci 0000:00:00.0: Intel GM45 Chipset |
| [ 4.731243] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable |
| [ 4.732615] pci 0000:00:00.0: detected 262144K stolen memory |
| [ 4.747168] [drm] Memory usable by graphics device = 2048M |
| [ 4.747172] checking generic (d0000000 500000) vs hw (d0000000 10000000) |
| [ 4.747173] fb: switching to inteldrmfb from EFI VGA |
| [ 4.747223] Console: switching to colour dummy device 80x25 |
| [ 4.747395] [drm] Replacing VGA console driver |
| [ 4.747478] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 4.747479] [drm] Driver supports precise vblank timestamp query. |
| [ 4.747483] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe935aa55 |
| [ 4.747488] [drm] Failed to find VBIOS tables (VBT) |
| [ 4.747750] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 4.749076] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. |
| [ 4.749260] ath: phy0: ASPM enabled: 0x43 |
| [ 4.749262] ath: EEPROM regdomain: 0x60 |
| [ 4.749263] ath: EEPROM indicates we should expect a direct regpair map |
| [ 4.749265] ath: Country alpha2 being used: 00 |
| [ 4.749266] ath: Regpair used: 0x60 |
| [ 4.749630] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1d/0x0/0x0/0x0/0x0) type:line |
| [ 4.749632] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=1 (0x1f/0x0/0x0/0x0/0x0) |
| [ 4.749633] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| [ 4.749635] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 |
| [ 4.749636] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x20/0x22 |
| [ 4.749637] snd_hda_codec_conexant hdaudioC0D0: inputs: |
| [ 4.749639] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 |
| [ 4.749641] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1e |
| [ 4.749643] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1b |
| [ 4.749644] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a |
| [ 4.751404] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication |
| [ 4.776318] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 4.776809] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb421c1280000, irq=16 |
| [ 4.787163] ath: phy1: ASPM enabled: 0x43 |
| [ 4.787166] ath: EEPROM regdomain: 0x6c |
| [ 4.787167] ath: EEPROM indicates we should expect a direct regpair map |
| [ 4.787172] ath: Country alpha2 being used: 00 |
| [ 4.787173] ath: Regpair used: 0x6c |
| [ 4.790291] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' |
| [ 4.790776] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xffffb421c15c0000, irq=17 |
| [ 4.794912] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| [ 4.800819] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 4.800852] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 4.800882] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 4.800913] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 4.800943] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 4.802647] [drm] RC6 disabled, disabling runtime PM support |
| [ 4.803054] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 |
| [ 4.803248] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170119/utaddress-247) |
| [ 4.803253] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 4.803256] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BE (\GPCM) (20170119/utaddress-247) |
| [ 4.803260] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170119/utaddress-247) |
| [ 4.803263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 4.803264] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BE (\GPCM) (20170119/utaddress-247) |
| [ 4.803267] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170119/utaddress-247) |
| [ 4.803270] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 4.803271] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 4.825151] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 4.825186] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 4.983705] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem |
| [ 4.991101] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr |
| [ 5.015998] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 5.018506] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 5.076010] Adding 8389628k swap on /dev/sdb2. Priority:-1 extents:1 across:8389628k FS |
| [ 5.278471] input: PC Speaker as /devices/platform/pcspkr/input/input15 |
| [ 5.319276] fbcon: inteldrmfb (fb0) is primary device |
| [ 5.327106] intel_powerclamp: No package C-state available |
| [ 5.391612] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 5.492949] iTCO_vendor_support: vendor-support=0 |
| [ 5.494277] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 5.494326] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560) |
| [ 5.494461] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 5.521173] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 5.919346] media: Linux media interface: v0.10 |
| [ 5.923473] Linux video capture interface: v2.00 |
| [ 5.953237] random: crng init done |
| [ 5.953512] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 5.967593] Bluetooth: Core ver 2.22 |
| [ 5.967613] NET: Registered protocol family 31 |
| [ 5.967614] Bluetooth: HCI device and connection manager initialized |
| [ 5.967619] Bluetooth: HCI socket layer initialized |
| [ 5.967621] Bluetooth: L2CAP socket layer initialized |
| [ 5.967632] Bluetooth: SCO socket layer initialized |
| [ 5.971731] usbcore: registered new interface driver btusb |
| [ 6.003973] systemd-journald[193]: Received request to flush runtime journal from PID 1 |
| [ 6.008090] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 6.052651] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480d) |
| [ 6.053838] uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6.053841] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6.053843] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6.054019] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input16 |
| [ 6.054162] usbcore: registered new interface driver uvcvideo |
| [ 6.054163] USB Video Class driver (1.1.1) |
| [ 6.056949] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 6.091916] Bluetooth: hci0: BCM: chip id 63 |
| [ 6.123916] Bluetooth: hci0: BCM20702A |
| [ 6.125917] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 6.126140] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2) |
| [ 6.126142] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 6.126143] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 6.251669] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: user_xattr |
| [ 6.432594] Console: switching to colour frame buffer device 180x56 |
| [ 6.658103] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 6.658104] Bluetooth: BNEP filters: protocol multicast |
| [ 6.658108] Bluetooth: BNEP socket layer initialized |
| [ 6.889681] ata1.00: configured for UDMA/133 |
| [ 6.889684] ata1: EH complete |
| [ 6.917395] thinkpad_ec: loading out-of-tree module taints kernel. |
| [ 6.917910] thinkpad_ec: thinkpad_ec 0.42 loaded. |
| [ 6.919393] hdaps: LENOVO ThinkPad T400s detected, setting orientation 2 |
| [ 6.920056] hdaps: initial mode latch is 0x05 |
| [ 6.920184] hdaps: setting ec_rate=250, filter_order=2 |
| [ 6.920400] hdaps: device successfully initialized. |
| [ 6.920778] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input17 |
| [ 6.921128] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input18 |
| [ 6.921326] hdaps: driver successfully loaded. |
| [ 7.000644] applesmc: supported laptop not found! |
| [ 7.000645] applesmc: driver init failed (ret=-19)! |
| [ 7.001304] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 7.095249] wmi: Mapper loaded |
| [ 7.124235] acer_wmi: Acer Laptop ACPI-WMI Extras |
| [ 7.124242] acer_wmi: No or unsupported WMI interface, unable to load |
| [ 8.944283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 9.152519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 9.158285] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9.169539] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9.185642] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9.190179] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| [ 9.199168] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| [ 9.212791] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| [ 9.459915] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| [ 9.475745] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 11.281262] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx |
| [ 11.281401] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 22.642428] tp_smapi 0.42 loading... |
| [ 22.642435] SMAPI not supported (ID=0x7f) |
| [ 22.642439] tp_smapi init failed (ret=-6)! |
| [ 22.713121] tp_smapi 0.42 loading... |
| [ 22.713129] SMAPI not supported (ID=0x7f) |
| [ 22.713133] tp_smapi init failed (ret=-6)! |
| [ 24.716185] Bluetooth: RFCOMM TTY layer initialized |
| [ 24.716192] Bluetooth: RFCOMM socket layer initialized |
| [ 24.716198] Bluetooth: RFCOMM ver 1.11 |
| [ 41.201281] PM: Syncing filesystems ... done. |
| [ 41.410666] PM: Preparing system for sleep (mem) |
| [ 41.410872] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [ 41.412286] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 41.413506] PM: Suspending system (mem) |
| [ 41.413523] Suspending console(s) (use no_console_suspend to debug) |
| [ 41.414009] hdaps: setting ec_rate=0, filter_order=1 |
| [ 41.414576] sd 1:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 41.499979] sd 1:0:0:0: [sdb] Stopping disk |
| [ 41.574677] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 41.574737] sd 0:0:0:0: [sda] Stopping disk |
| [ 41.627876] ACPI : EC: event blocked |
| [ 41.650243] e1000e: EEE TX LPI TIMER: 00000000 |
| [ 42.096375] PM: suspend of devices complete after 682.496 msecs |
| [ 42.116494] PM: late suspend of devices complete after 20.115 msecs |
| [ 42.116757] ACPI : EC: interrupt blocked |
| [ 42.117160] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI |
| [ 42.117196] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI |
| [ 42.117246] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI |
| [ 42.117294] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI |
| [ 42.117433] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI |
| [ 42.117538] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI |
| [ 42.117587] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI |
| [ 42.117633] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI |
| [ 42.156401] PM: noirq suspend of devices complete after 39.903 msecs |
| [ 42.157066] ACPI: Preparing to enter system sleep state S3 |
| [ 42.172697] ACPI : EC: EC stopped |
| [ 42.172698] PM: Saving platform NVS memory |
| [ 42.172699] Disabling non-boot CPUs ... |
| [ 42.173048] Broke affinity for irq 1 |
| [ 42.173056] Broke affinity for irq 9 |
| [ 42.173059] Broke affinity for irq 12 |
| [ 42.173063] Broke affinity for irq 16 |
| [ 42.173067] Broke affinity for irq 17 |
| [ 42.173086] Broke affinity for irq 32 |
| [ 42.173087] Broke affinity for irq 34 |
| [ 42.174099] smpboot: CPU 1 is now offline |
| [ 42.174389] ACPI: Low-level resume complete |
| [ 42.174389] ACPI : EC: EC started |
| [ 42.174389] PM: Restoring platform NVS memory |
| [ 42.174389] Suspended for 8.158 seconds |
| [ 42.174389] Enabling non-boot CPUs ... |
| [ 42.174389] x86: Booting SMP configuration: |
| [ 42.174389] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 42.184507] cache: parent cpu1 should not be sleeping |
| [ 42.184992] CPU1 is up |
| [ 42.189435] ACPI: Waking up from system sleep state S3 |
| [ 42.196020] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI |
| [ 42.196081] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI |
| [ 42.196092] ACPI : EC: interrupt unblocked |
| [ 42.196140] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI |
| [ 42.196260] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 42.196317] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI |
| [ 42.196395] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI |
| [ 42.212764] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI |
| [ 42.216575] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI |
| [ 42.232616] pcieport 0000:00:1c.3: System wakeup disabled by ACPI |
| [ 42.232826] PM: noirq resume of devices complete after 36.987 msecs |
| [ 42.233224] PM: early resume of devices complete after 0.325 msecs |
| [ 42.233349] ACPI : EC: event unblocked |
| [ 42.235507] usb usb4: root hub lost power or was reset |
| [ 42.235616] usb usb5: root hub lost power or was reset |
| [ 42.235760] usb usb7: root hub lost power or was reset |
| [ 42.236077] usb usb8: root hub lost power or was reset |
| [ 42.236122] usb usb9: root hub lost power or was reset |
| [ 42.236167] usb usb10: root hub lost power or was reset |
| [ 42.236427] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [ 42.237383] sd 0:0:0:0: [sda] Starting disk |
| [ 42.237413] sd 1:0:0:0: [sdb] Starting disk |
| [ 42.550711] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 42.550738] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 42.550760] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 42.550781] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 42.551632] ata1.00: configured for UDMA/133 |
| [ 42.592385] usb 1-6: reset high-speed USB device number 4 using ehci-pci |
| [ 42.592417] usb 5-2: reset full-speed USB device number 3 using uhci_hcd |
| [ 42.612173] ata2.00: configured for UDMA/133 |
| [ 42.757089] hdaps: initial mode latch is 0x05 |
| [ 42.757245] hdaps: setting ec_rate=250, filter_order=2 |
| [ 42.856414] usb 5-1: reset full-speed USB device number 2 using uhci_hcd |
| [ 42.986667] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] |
| [ 43.018016] PM: resume of devices complete after 784.787 msecs |
| [ 43.018135] usb 5-2:1.0: rebind failed: -517 |
| [ 43.018140] usb 5-2:1.1: rebind failed: -517 |
| [ 43.018422] PM: Finishing wakeup. |
| [ 43.018423] Restarting tasks ... done. |
| [ 43.034780] video LNXVIDEO:00: Restoring backlight state |
| [ 43.173011] Bluetooth: hci0: BCM: chip id 63 |
| [ 43.205015] Bluetooth: hci0: BCM20702A |
| [ 43.207010] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 43.207023] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2) |
| [ 43.207028] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 43.207030] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 43.274843] ata1.00: configured for UDMA/133 |
| [ 43.274846] ata1: EH complete |
| [ 43.360628] e1000e: eth0 NIC Link is Down |
| [ 43.361427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 43.572618] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 43.573432] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 43.587792] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 43.589331] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| [ 43.603488] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| [ 43.851549] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 43.865447] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| [ 45.805348] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx |
| [ 45.805490] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |