| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Linux version 3.3.0-custom (ilios@ilios-GA-MA785GMT-UD2H) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #1 SMP Fri Jul 3 21:25:46 KST 2015 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0-custom root=UUID=431080f8-5b69-40aa-b959-80b7410ae4d6 ro quiet splash crashkernel=384M-:128M |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) |
| [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) |
| [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffa4000 (usable) |
| [ 0.000000] BIOS-e820: 000000006ffa4000 - 0000000080000000 (reserved) |
| [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) |
| [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
| [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] DMI present. |
| [ 0.000000] DMI: GIGABYTE GA-MA785GMT-UD2H/GA-MA785GMT-UD2H, BIOS 4.0-8824-g5a25e1b 07/02/2015 |
| [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) |
| [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] last_pfn = 0x6ffa4 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back |
| [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back |
| [ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back |
| [ 0.000000] 3 base 0000B0000000 mask FFFFF0000000 write-combining |
| [ 0.000000] 4 base 0000C0000000 mask FFFFF8000000 write-combining |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] found SMP MP-table at [ffff8800000f1b10] f1b10 |
| [ 0.000000] initial memory mapped : 0 - 20000000 |
| [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: 0000000000000000-000000006ffa4000 |
| [ 0.000000] 0000000000 - 0040000000 page 1G |
| [ 0.000000] 0040000000 - 006fe00000 page 2M |
| [ 0.000000] 006fe00000 - 006ffa4000 page 4k |
| [ 0.000000] kernel direct mapping tables up to 6ffa4000 @ 1fffd000-20000000 |
| [ 0.000000] RAMDISK: 2b7b2000 - 31bd1000 |
| [ 0.000000] Reserving 128MB of memory at 560MB for crashkernel (System RAM: 1791MB) |
| [ 0.000000] ACPI: RSDP 00000000000f1c50 00024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 000000006ffaf0e0 00064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 000000006ffb1be0 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 000000006ffaf250 0298C (v02 GIGA COREBOOT 00010001 INTL 20150204) |
| [ 0.000000] ACPI: FACS 000000006ffaf210 00040 |
| [ 0.000000] ACPI: SSDT 000000006ffb1ce0 00887 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: APIC 000000006ffb2570 00064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 000000006ffb25e0 000B0 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 000000006ffb2690 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 000000006ffb26c0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 000000006ffb2700 000B0 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 000000006ffb27b0 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 |
| [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 |
| [ 0.000000] NUMA: Initialized distance table, cnt=1 |
| [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,6ffa4000) -> [0,6ffa4000) |
| [ 0.000000] Initmem setup node 0 0000000000000000-000000006ffa4000 |
| [ 0.000000] NODE_DATA [000000006ff9e000 - 000000006ffa2fff] |
| [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006da00000-ffff88006f5fffff] on node 0 |
| [ 0.000000] Zone PFN ranges: |
| [ 0.000000] DMA 0x00000010 -> 0x00001000 |
| [ 0.000000] DMA32 0x00001000 -> 0x00100000 |
| [ 0.000000] Normal empty |
| [ 0.000000] Movable zone start PFN for each node |
| [ 0.000000] Early memory PFN ranges |
| [ 0.000000] 0: 0x00000010 -> 0x0000009f |
| [ 0.000000] 0: 0x00000100 -> 0x0006ffa4 |
| [ 0.000000] On node 0 totalpages: 458547 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 5 pages reserved |
| [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 7103 pages used for memmap |
| [ 0.000000] DMA32 zone: 447461 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x818 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ2 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 |
| [ 0.000000] SMP: Allowing 3 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
| [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
| [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
| [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) |
| [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:3 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88006fc00000 s77760 r8192 d20544 u524288 |
| [ 0.000000] pcpu-alloc: s77760 r8192 d20544 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 - |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 451375 |
| [ 0.000000] Policy zone: DMA32 |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0-custom root=UUID=431080f8-5b69-40aa-b959-80b7410ae4d6 ro quiet splash crashkernel=384M-:128M |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Checking aperture... |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] Node 0: aperture @ d4000000 size 64 MB |
| [ 0.000000] Memory: 1558416k/1834640k available (5840k kernel code, 452k absent, 275772k reserved, 5221k data, 756k init) |
| [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=3, Nodes=1 |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] NR_IRQS:16640 nr_irqs:704 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] Fast TSC calibration using PIT |
| [ 0.000000] Detected 2606.668 MHz processor. |
| [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5213.33 BogoMIPS (lpj=10426672) |
| [ 0.004006] pid_max: default: 32768 minimum: 301 |
| [ 0.004027] Security Framework initialized |
| [ 0.004044] AppArmor: AppArmor initialized |
| [ 0.004188] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.004933] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.005282] Mount-cache hash table entries: 256 |
| [ 0.005392] Initializing cgroup subsys cpuacct |
| [ 0.005394] Initializing cgroup subsys devices |
| [ 0.005396] Initializing cgroup subsys freezer |
| [ 0.005398] Initializing cgroup subsys blkio |
| [ 0.005402] Initializing cgroup subsys perf_event |
| [ 0.005427] tseg: 0000000000 |
| [ 0.005436] CPU: Physical Processor ID: 0 |
| [ 0.005437] CPU: Processor Core ID: 0 |
| [ 0.005438] mce: CPU supports 6 MCE banks |
| [ 0.005475] ACPI: Core revision 20120111 |
| [ 0.006808] ftrace: allocating 22077 entries in 87 pages |
| [ 0.016632] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.057346] CPU0: AMD Phenom(tm) II X3 710 Processor stepping 02 |
| [ 0.060003] Performance Events: AMD PMU driver. |
| [ 0.060003] ... version: 0 |
| [ 0.060003] ... bit width: 48 |
| [ 0.060003] ... generic registers: 4 |
| [ 0.060003] ... value mask: 0000ffffffffffff |
| [ 0.060003] ... max period: 00007fffffffffff |
| [ 0.060003] ... fixed-purpose events: 0 |
| [ 0.060003] ... event mask: 000000000000000f |
| [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. |
| [ 0.060003] Booting Node 0, Processors #1 |
| [ 0.060003] smpboot cpu 1: start_ip = 9a000 |
| [ 0.068016] NMI watchdog enabled, takes one hw-pmu counter. |
| [ 0.068079] #2 Ok. |
| [ 0.068080] smpboot cpu 2: start_ip = 9a000 |
| [ 0.084016] NMI watchdog enabled, takes one hw-pmu counter. |
| [ 0.084033] Brought up 3 CPUs |
| [ 0.084035] Total of 3 processors activated (15640.00 BogoMIPS). |
| [ 0.088092] devtmpfs: initialized |
| [ 0.089243] EVM: security.selinux |
| [ 0.089244] EVM: security.SMACK64 |
| [ 0.089245] EVM: security.capability |
| [ 0.092019] print_constraints: dummy: |
| [ 0.092053] RTC time: 5:17:33, date: 07/02/15 |
| [ 0.092081] NET: Registered protocol family 16 |
| [ 0.092153] node 0 link 0: io port [1000, 4fff] |
| [ 0.092156] TOM: 0000000080000000 aka 2048M |
| [ 0.092158] Fam 10h mmconf [mem 0xe0000000-0xefffffff] |
| [ 0.092161] node 0 link 0: mmio [cc000000, d35fffff] |
| [ 0.092164] node 0 link 0: mmio [b0000000, c80fffff] |
| [ 0.092166] bus: [00, 05] on node 0 link 0 |
| [ 0.092168] bus: 00 index 0 [io 0x0000-0xffff] |
| [ 0.092170] bus: 00 index 1 [mem 0xc8100000-0xdfffffff] |
| [ 0.092172] bus: 00 index 2 [mem 0x80000000-0xc80fffff] |
| [ 0.092174] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff] |
| [ 0.092241] ACPI: bus type pci registered |
| [ 0.092289] PCI: Using configuration type 1 for base access |
| [ 0.092290] PCI: Using configuration type 1 for extended access |
| [ 0.092350] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.092351] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.092353] mtrr: corrected configuration. |
| [ 0.092815] bio: create slab <bio-0> at 0 |
| [ 0.092815] ACPI: Added _OSI(Module Device) |
| [ 0.092815] ACPI: Added _OSI(Processor Device) |
| [ 0.092815] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.092815] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.092815] ACPI: EC: Look up EC in DSDT |
| [ 0.092969] ACPI: Executed 2 blocks of module-level executable AML code |
| [ 0.094590] ACPI: Interpreter enabled |
| [ 0.094593] ACPI: (supports S0 S1 S2 S3 S4 S5) |
| [ 0.094614] ACPI: BIOS offers _BFS |
| [ 0.094615] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org |
| [ 0.094617] ACPI: Using IOAPIC for interrupt routing |
| [ 0.096797] ACPI: Power Resource [PFN0] (on) |
| [ 0.096935] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.097016] [Firmware Bug]: ACPI: no secondary bus range in _CRS |
| [ 0.097023] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.097133] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] |
| [ 0.097136] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] |
| [ 0.097138] pci_root PNP0A03:00: host bridge window [mem 0x00000000-0x0009ffff] |
| [ 0.097140] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] |
| [ 0.097142] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] |
| [ 0.097144] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000fffff] |
| [ 0.097146] pci_root PNP0A03:00: host bridge window [mem 0x00100000-0x7fffffff] |
| [ 0.097149] pci_root PNP0A03:00: host bridge window [0x0-0x0] (ignored, not CPU addressable) |
| [ 0.097151] pci_root PNP0A03:00: host bridge window [0x0-0x0] (ignored, not CPU addressable) |
| [ 0.097178] PCI host bridge to bus 0000:00 |
| [ 0.097180] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.097181] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| [ 0.097183] pci_bus 0000:00: root bus resource [mem 0x00000000-0x0009ffff] |
| [ 0.097185] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.097187] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] |
| [ 0.097189] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] |
| [ 0.097191] pci_bus 0000:00: root bus resource [mem 0x00100000-0x7fffffff] |
| [ 0.097209] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 |
| [ 0.097316] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 |
| [ 0.097389] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 |
| [ 0.097460] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold |
| [ 0.097500] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 |
| [ 0.097571] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold |
| [ 0.097613] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 |
| [ 0.097641] pci 0000:00:11.0: reg 10: [io 0x4020-0x4027] |
| [ 0.097654] pci 0000:00:11.0: reg 14: [io 0x4040-0x4043] |
| [ 0.097667] pci 0000:00:11.0: reg 18: [io 0x4028-0x402f] |
| [ 0.097680] pci 0000:00:11.0: reg 1c: [io 0x4044-0x4047] |
| [ 0.097693] pci 0000:00:11.0: reg 20: [io 0x4000-0x400f] |
| [ 0.097707] pci 0000:00:11.0: reg 24: [mem 0xd3509000-0xd35093ff] |
| [ 0.097735] pci 0000:00:11.0: set SATA to AHCI mode |
| [ 0.097803] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 |
| [ 0.097822] pci 0000:00:12.0: reg 10: [mem 0xd3504000-0xd3504fff] |
| [ 0.097914] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 |
| [ 0.097932] pci 0000:00:12.1: reg 10: [mem 0xd3505000-0xd3505fff] |
| [ 0.098033] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 |
| [ 0.098059] pci 0000:00:12.2: reg 10: [mem 0xd3509400-0xd35094ff] |
| [ 0.098179] pci 0000:00:12.2: supports D1 D2 |
| [ 0.098181] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.098214] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 |
| [ 0.098233] pci 0000:00:13.0: reg 10: [mem 0xd3506000-0xd3506fff] |
| [ 0.098325] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 |
| [ 0.098343] pci 0000:00:13.1: reg 10: [mem 0xd3507000-0xd3507fff] |
| [ 0.098444] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 |
| [ 0.098470] pci 0000:00:13.2: reg 10: [mem 0xd3509500-0xd35095ff] |
| [ 0.098590] pci 0000:00:13.2: supports D1 D2 |
| [ 0.098592] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.098628] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 |
| [ 0.098768] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 |
| [ 0.098786] pci 0000:00:14.1: reg 10: [io 0x4030-0x4037] |
| [ 0.098799] pci 0000:00:14.1: reg 14: [io 0x4048-0x404b] |
| [ 0.098812] pci 0000:00:14.1: reg 18: [io 0x4038-0x403f] |
| [ 0.098825] pci 0000:00:14.1: reg 1c: [io 0x404c-0x404f] |
| [ 0.098825] pci 0000:00:14.1: reg 20: [io 0x4010-0x401f] |
| [ 0.098825] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 |
| [ 0.098825] pci 0000:00:14.2: reg 10: [mem 0xd3500000-0xd3503fff 64bit] |
| [ 0.098825] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.098825] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 |
| [ 0.098825] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 |
| [ 0.098825] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 |
| [ 0.098825] pci 0000:00:14.5: reg 10: [mem 0xd3508000-0xd3508fff] |
| [ 0.098825] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 |
| [ 0.098825] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 |
| [ 0.098825] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 |
| [ 0.098825] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 |
| [ 0.098825] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 |
| [ 0.098825] pci 0000:01:05.0: [1002:9710] type 0 class 0x000300 |
| [ 0.098825] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff pref] |
| [ 0.098825] pci 0000:01:05.0: reg 14: [io 0x1000-0x10ff] |
| [ 0.098825] pci 0000:01:05.0: reg 18: [mem 0xd3200000-0xd320ffff] |
| [ 0.098825] pci 0000:01:05.0: reg 24: [mem 0xd3100000-0xd31fffff] |
| [ 0.098825] pci 0000:01:05.0: supports D1 D2 |
| [ 0.098825] pci 0000:00:01.0: PCI bridge to [bus 01-01] |
| [ 0.098825] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] |
| [ 0.098825] pci 0000:00:01.0: bridge window [mem 0xd3100000-0xd32fffff] |
| [ 0.098825] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] |
| [ 0.098825] pci 0000:02:00.0: [10de:0615] type 0 class 0x000300 |
| [ 0.098825] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] |
| [ 0.098825] pci 0000:02:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref] |
| [ 0.098825] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit] |
| [ 0.098825] pci 0000:02:00.0: reg 24: [io 0x2000-0x207f] |
| [ 0.098825] pci 0000:02:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref] |
| [ 0.108020] pci 0000:00:02.0: PCI bridge to [bus 02-02] |
| [ 0.108026] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] |
| [ 0.108030] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd30fffff] |
| [ 0.108035] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] |
| [ 0.108102] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 |
| [ 0.108120] pci 0000:04:00.0: reg 10: [io 0x3000-0x30ff] |
| [ 0.108149] pci 0000:04:00.0: reg 18: [mem 0xc8010000-0xc8010fff 64bit pref] |
| [ 0.108169] pci 0000:04:00.0: reg 20: [mem 0xc8000000-0xc800ffff 64bit pref] |
| [ 0.108182] pci 0000:04:00.0: reg 30: [mem 0xd3300000-0xd330ffff pref] |
| [ 0.108251] pci 0000:04:00.0: supports D1 D2 |
| [ 0.108253] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.116019] pci 0000:00:0a.0: PCI bridge to [bus 04-04] |
| [ 0.116025] pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff] |
| [ 0.116029] pci 0000:00:0a.0: bridge window [mem 0xd3300000-0xd33fffff] |
| [ 0.116035] pci 0000:00:0a.0: bridge window [mem 0xc8000000-0xc80fffff 64bit pref] |
| [ 0.116095] pci 0000:05:0e.0: [104c:8024] type 0 class 0x000c00 |
| [ 0.116124] pci 0000:05:0e.0: reg 10: [mem 0xd3404000-0xd34047ff] |
| [ 0.116141] pci 0000:05:0e.0: reg 14: [mem 0xd3400000-0xd3403fff] |
| [ 0.116262] pci 0000:05:0e.0: supports D1 D2 |
| [ 0.116264] pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot |
| [ 0.116313] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode) |
| [ 0.116322] pci 0000:00:14.4: bridge window [mem 0xd3400000-0xd34fffff] |
| [ 0.116328] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| [ 0.116331] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) |
| [ 0.116333] pci 0000:00:14.4: bridge window [mem 0x00000000-0x0009ffff] (subtractive decode) |
| [ 0.116336] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.116339] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) |
| [ 0.116341] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000fffff] (subtractive decode) |
| [ 0.116344] pci 0000:00:14.4: bridge window [mem 0x00100000-0x7fffffff] (subtractive decode) |
| [ 0.116367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| [ 0.116421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] |
| [ 0.116436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR2._PRT] |
| [ 0.116464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBRA._PRT] |
| [ 0.116484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT] |
| [ 0.116552] pci0000:00: Requesting ACPI _OSC control (0x1d) |
| [ 0.116555] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d |
| [ 0.116557] ACPI _OSC control for PCIe not granted, disabling ASPM |
| [ 0.119530] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.119566] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.119602] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.119636] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.119673] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.119708] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. |
| [ 0.119741] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.119776] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.120026] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=none,locks=none |
| [ 0.120032] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.120034] vgaarb: loaded |
| [ 0.120035] vgaarb: bridge control possible 0000:02:00.0 |
| [ 0.120037] vgaarb: bridge control possible 0000:01:05.0 |
| [ 0.120155] SCSI subsystem initialized |
| [ 0.120164] libata version 3.00 loaded. |
| [ 0.120164] usbcore: registered new interface driver usbfs |
| [ 0.120164] usbcore: registered new interface driver hub |
| [ 0.120164] usbcore: registered new device driver usb |
| [ 0.120164] PCI: Using ACPI for IRQ routing |
| [ 0.120164] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.120164] pci 0000:00:01.0: no compatible bridge window for [mem 0xd3100000-0xd32fffff] |
| [ 0.120164] pci 0000:00:01.0: no compatible bridge window for [mem 0xc0000000-0xc7ffffff 64bit pref] |
| [ 0.120164] pci 0000:00:02.0: no compatible bridge window for [mem 0xd0000000-0xd30fffff] |
| [ 0.120164] pci 0000:00:02.0: no compatible bridge window for [mem 0xb0000000-0xbfffffff 64bit pref] |
| [ 0.120164] pci 0000:00:0a.0: no compatible bridge window for [mem 0xd3300000-0xd33fffff] |
| [ 0.120164] pci 0000:00:0a.0: no compatible bridge window for [mem 0xc8000000-0xc80fffff 64bit pref] |
| [ 0.120164] pci 0000:00:14.4: no compatible bridge window for [mem 0xd3400000-0xd34fffff] |
| [ 0.120164] pci 0000:00:11.0: no compatible bridge window for [mem 0xd3509000-0xd35093ff] |
| [ 0.120164] pci 0000:00:12.0: no compatible bridge window for [mem 0xd3504000-0xd3504fff] |
| [ 0.120164] pci 0000:00:12.1: no compatible bridge window for [mem 0xd3505000-0xd3505fff] |
| [ 0.120164] pci 0000:00:12.2: no compatible bridge window for [mem 0xd3509400-0xd35094ff] |
| [ 0.120164] pci 0000:00:13.0: no compatible bridge window for [mem 0xd3506000-0xd3506fff] |
| [ 0.120164] pci 0000:00:13.1: no compatible bridge window for [mem 0xd3507000-0xd3507fff] |
| [ 0.120164] pci 0000:00:13.2: no compatible bridge window for [mem 0xd3509500-0xd35095ff] |
| [ 0.120164] pci 0000:00:14.2: no compatible bridge window for [mem 0xd3500000-0xd3503fff 64bit] |
| [ 0.120164] pci 0000:00:14.5: no compatible bridge window for [mem 0xd3508000-0xd3508fff] |
| [ 0.120164] pci 0000:01:05.0: no compatible bridge window for [mem 0xc0000000-0xc7ffffff pref] |
| [ 0.120164] pci 0000:01:05.0: no compatible bridge window for [mem 0xd3200000-0xd320ffff] |
| [ 0.120164] pci 0000:01:05.0: no compatible bridge window for [mem 0xd3100000-0xd31fffff] |
| [ 0.120164] pci 0000:02:00.0: no compatible bridge window for [mem 0xd2000000-0xd2ffffff] |
| [ 0.120164] pci 0000:02:00.0: no compatible bridge window for [mem 0xb0000000-0xbfffffff 64bit pref] |
| [ 0.120164] pci 0000:02:00.0: no compatible bridge window for [mem 0xd0000000-0xd1ffffff 64bit] |
| [ 0.120164] pci 0000:04:00.0: no compatible bridge window for [mem 0xc8010000-0xc8010fff 64bit pref] |
| [ 0.120164] pci 0000:04:00.0: no compatible bridge window for [mem 0xc8000000-0xc800ffff 64bit pref] |
| [ 0.120164] pci 0000:05:0e.0: no compatible bridge window for [mem 0xd3404000-0xd34047ff] |
| [ 0.120164] pci 0000:05:0e.0: no compatible bridge window for [mem 0xd3400000-0xd3403fff] |
| [ 0.120190] reserve RAM buffer: 000000000009fc00 - 000000000009ffff |
| [ 0.120192] reserve RAM buffer: 000000006ffa4000 - 000000006fffffff |
| [ 0.120263] NetLabel: Initializing |
| [ 0.120264] NetLabel: domain hash size = 128 |
| [ 0.120266] NetLabel: protocols = UNLABELED CIPSOv4 |
| [ 0.120274] NetLabel: unlabeled traffic allowed by default |
| [ 0.120286] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 |
| [ 0.120286] hpet0: 4 comparators, 32-bit 14.318180 MHz counter |
| [ 0.122065] Switching to clocksource hpet |
| [ 0.128404] AppArmor: AppArmor Filesystem Enabled |
| [ 0.128419] pnp: PnP ACPI init |
| [ 0.128429] ACPI: bus type pnp registered |
| [ 0.128593] pnp 00:00: [io 0x0cf8-0x0cff] |
| [ 0.128595] pnp 00:00: [io 0x0000-0x0cf7 window] |
| [ 0.128597] pnp 00:00: [io 0x0d00-0xffff window] |
| [ 0.128600] pnp 00:00: [mem 0x00000000-0x0009ffff] |
| [ 0.128602] pnp 00:00: [mem 0x000a0000-0x000bffff] |
| [ 0.128603] pnp 00:00: [mem 0x000c0000-0x000dffff] |
| [ 0.128605] pnp 00:00: [mem 0x000e0000-0x000fffff] |
| [ 0.128606] pnp 00:00: [mem 0x00100000-0x7fffffff] |
| [ 0.128608] pnp 00:00: [mem 0x00000000 window] |
| [ 0.128609] pnp 00:00: [mem 0x00000000 window] |
| [ 0.128611] pnp 00:00: [mem 0x00000000 window] |
| [ 0.128641] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) |
| [ 0.128716] pnp 00:01: [irq 8] |
| [ 0.128718] pnp 00:01: [io 0x0070-0x0071] |
| [ 0.128740] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.128747] pnp 00:02: [io 0x0061] |
| [ 0.128768] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) |
| [ 0.128777] pnp 00:03: [dma 4] |
| [ 0.128779] pnp 00:03: [io 0x0000-0x000f] |
| [ 0.128781] pnp 00:03: [io 0x0081-0x0083] |
| [ 0.128782] pnp 00:03: [io 0x0087] |
| [ 0.128784] pnp 00:03: [io 0x0089-0x008b] |
| [ 0.128785] pnp 00:03: [io 0x008f] |
| [ 0.128787] pnp 00:03: [io 0x00c0-0x00df] |
| [ 0.128809] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) |
| [ 0.128816] pnp 00:04: [io 0x00f0-0x00ff] |
| [ 0.128823] pnp 00:04: [irq 13] |
| [ 0.128845] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) |
| [ 0.128866] pnp 00:05: [mem 0xfed00000-0xfed003ff] |
| [ 0.128890] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) |
| [ 0.128902] pnp: PnP ACPI: found 6 devices |
| [ 0.128904] ACPI: ACPI bus type pnp unregistered |
| [ 0.136029] pci 0000:02:00.0: no compatible bridge window for [mem 0xd3000000-0xd301ffff pref] |
| [ 0.136033] pci 0000:04:00.0: no compatible bridge window for [mem 0xd3300000-0xd330ffff pref] |
| [ 0.136036] PCI: max bus depth: 1 pci_try_num: 2 |
| [ 0.136067] pci 0000:00:01.0: BAR 15: can't assign mem pref (size 0x8000000) |
| [ 0.136071] pci 0000:00:02.0: BAR 15: can't assign mem pref (size 0x18000000) |
| [ 0.136073] pci 0000:00:02.0: BAR 14: can't assign mem (size 0x3000000) |
| [ 0.136076] pci 0000:00:01.0: BAR 14: can't assign mem (size 0x200000) |
| [ 0.136078] pci 0000:00:0a.0: BAR 15: can't assign mem pref (size 0x100000) |
| [ 0.136081] pci 0000:00:14.4: BAR 14: can't assign mem (size 0x100000) |
| [ 0.136083] pci 0000:00:14.2: BAR 0: can't assign mem (size 0x4000) |
| [ 0.136085] pci 0000:00:14.2: BAR 0: trying firmware assignment [mem 0xd3500000-0xd3503fff 64bit] |
| [ 0.136088] pci 0000:00:14.2: BAR 0: assigned [mem 0xd3500000-0xd3503fff 64bit] |
| [ 0.136097] pci 0000:00:12.0: BAR 0: can't assign mem (size 0x1000) |
| [ 0.136099] pci 0000:00:12.0: BAR 0: trying firmware assignment [mem 0xd3504000-0xd3504fff] |
| [ 0.136101] pci 0000:00:12.0: BAR 0: assigned [mem 0xd3504000-0xd3504fff] |
| [ 0.136107] pci 0000:00:12.1: BAR 0: can't assign mem (size 0x1000) |
| [ 0.136109] pci 0000:00:12.1: BAR 0: trying firmware assignment [mem 0xd3505000-0xd3505fff] |
| [ 0.136111] pci 0000:00:12.1: BAR 0: assigned [mem 0xd3505000-0xd3505fff] |
| [ 0.136117] pci 0000:00:13.0: BAR 0: can't assign mem (size 0x1000) |
| [ 0.136119] pci 0000:00:13.0: BAR 0: trying firmware assignment [mem 0xd3506000-0xd3506fff] |
| [ 0.136121] pci 0000:00:13.0: BAR 0: assigned [mem 0xd3506000-0xd3506fff] |
| [ 0.136127] pci 0000:00:13.1: BAR 0: can't assign mem (size 0x1000) |
| [ 0.136129] pci 0000:00:13.1: BAR 0: trying firmware assignment [mem 0xd3507000-0xd3507fff] |
| [ 0.136131] pci 0000:00:13.1: BAR 0: assigned [mem 0xd3507000-0xd3507fff] |
| [ 0.136137] pci 0000:00:14.5: BAR 0: can't assign mem (size 0x1000) |
| [ 0.136139] pci 0000:00:14.5: BAR 0: trying firmware assignment [mem 0xd3508000-0xd3508fff] |
| [ 0.136141] pci 0000:00:14.5: BAR 0: assigned [mem 0xd3508000-0xd3508fff] |
| [ 0.136147] pci 0000:00:11.0: BAR 5: can't assign mem (size 0x400) |
| [ 0.136149] pci 0000:00:11.0: BAR 5: trying firmware assignment [mem 0xd3509000-0xd35093ff] |
| [ 0.136151] pci 0000:00:11.0: BAR 5: assigned [mem 0xd3509000-0xd35093ff] |
| [ 0.136157] pci 0000:00:12.2: BAR 0: can't assign mem (size 0x100) |
| [ 0.136159] pci 0000:00:12.2: BAR 0: trying firmware assignment [mem 0xd3509400-0xd35094ff] |
| [ 0.136161] pci 0000:00:12.2: BAR 0: assigned [mem 0xd3509400-0xd35094ff] |
| [ 0.136167] pci 0000:00:13.2: BAR 0: can't assign mem (size 0x100) |
| [ 0.136169] pci 0000:00:13.2: BAR 0: trying firmware assignment [mem 0xd3509500-0xd35095ff] |
| [ 0.136171] pci 0000:00:13.2: BAR 0: assigned [mem 0xd3509500-0xd35095ff] |
| [ 0.136177] pci 0000:01:05.0: BAR 0: can't assign mem pref (size 0x8000000) |
| [ 0.136179] pci 0000:01:05.0: BAR 0: trying firmware assignment [mem 0xc0000000-0xc7ffffff pref] |
| [ 0.136182] pci 0000:01:05.0: BAR 0: assigned [mem 0xc0000000-0xc7ffffff pref] |
| [ 0.136186] pci 0000:01:05.0: BAR 5: can't assign mem (size 0x100000) |
| [ 0.136188] pci 0000:01:05.0: BAR 5: trying firmware assignment [mem 0xd3100000-0xd31fffff] |
| [ 0.136190] pci 0000:01:05.0: BAR 5: assigned [mem 0xd3100000-0xd31fffff] |
| [ 0.136194] pci 0000:01:05.0: BAR 2: can't assign mem (size 0x10000) |
| [ 0.136196] pci 0000:01:05.0: BAR 2: trying firmware assignment [mem 0xd3200000-0xd320ffff] |
| [ 0.136198] pci 0000:01:05.0: BAR 2: assigned [mem 0xd3200000-0xd320ffff] |
| [ 0.136202] pci 0000:00:01.0: PCI bridge to [bus 01-01] |
| [ 0.136205] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] |
| [ 0.136215] pci 0000:02:00.0: BAR 1: can't assign mem pref (size 0x10000000) |
| [ 0.136217] pci 0000:02:00.0: BAR 1: trying firmware assignment [mem 0xb0000000-0xbfffffff 64bit pref] |
| [ 0.136220] pci 0000:02:00.0: BAR 1: assigned [mem 0xb0000000-0xbfffffff 64bit pref] |
| [ 0.136228] pci 0000:02:00.0: BAR 3: can't assign mem (size 0x2000000) |
| [ 0.136230] pci 0000:02:00.0: BAR 3: trying firmware assignment [mem 0xd0000000-0xd1ffffff 64bit] |
| [ 0.136233] pci 0000:02:00.0: BAR 3: assigned [mem 0xd0000000-0xd1ffffff 64bit] |
| [ 0.136241] pci 0000:02:00.0: BAR 0: can't assign mem (size 0x1000000) |
| [ 0.136243] pci 0000:02:00.0: BAR 0: trying firmware assignment [mem 0xd2000000-0xd2ffffff] |
| [ 0.136245] pci 0000:02:00.0: BAR 0: assigned [mem 0xd2000000-0xd2ffffff] |
| [ 0.136251] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000) |
| [ 0.136253] pci 0000:00:02.0: PCI bridge to [bus 02-02] |
| [ 0.136255] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] |
| [ 0.136265] pci 0000:04:00.0: BAR 4: can't assign mem pref (size 0x10000) |
| [ 0.136267] pci 0000:04:00.0: BAR 4: trying firmware assignment [mem 0xc8000000-0xc800ffff 64bit pref] |
| [ 0.136269] pci 0000:04:00.0: BAR 4: assigned [mem 0xc8000000-0xc800ffff 64bit pref] |
| [ 0.136278] pci 0000:04:00.0: BAR 6: can't assign mem pref (size 0x10000) |
| [ 0.136280] pci 0000:04:00.0: BAR 2: can't assign mem pref (size 0x1000) |
| [ 0.136284] pci 0000:04:00.0: BAR 2: trying firmware assignment [mem 0xc8010000-0xc8010fff 64bit pref] |
| [ 0.136286] pci 0000:04:00.0: BAR 2: assigned [mem 0xc8010000-0xc8010fff 64bit pref] |
| [ 0.136294] pci 0000:00:0a.0: PCI bridge to [bus 04-04] |
| [ 0.136297] pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff] |
| [ 0.136308] pci 0000:05:0e.0: BAR 1: can't assign mem (size 0x4000) |
| [ 0.136310] pci 0000:05:0e.0: BAR 1: trying firmware assignment [mem 0xd3400000-0xd3403fff] |
| [ 0.136312] pci 0000:05:0e.0: BAR 1: assigned [mem 0xd3400000-0xd3403fff] |
| [ 0.136319] pci 0000:05:0e.0: BAR 0: can't assign mem (size 0x800) |
| [ 0.136321] pci 0000:05:0e.0: BAR 0: trying firmware assignment [mem 0xd3404000-0xd34047ff] |
| [ 0.136323] pci 0000:05:0e.0: BAR 0: assigned [mem 0xd3404000-0xd34047ff] |
| [ 0.136329] pci 0000:00:14.4: PCI bridge to [bus 05-05] |
| [ 0.136363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.136365] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| [ 0.136367] pci_bus 0000:00: resource 6 [mem 0x00000000-0x0009ffff] |
| [ 0.136369] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] |
| [ 0.136373] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] |
| [ 0.136374] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] |
| [ 0.136377] pci_bus 0000:00: resource 10 [mem 0x00100000-0x7fffffff] |
| [ 0.136379] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.136381] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.136382] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] |
| [ 0.136384] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] |
| [ 0.136386] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] |
| [ 0.136388] pci_bus 0000:05: resource 6 [mem 0x00000000-0x0009ffff] |
| [ 0.136390] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff] |
| [ 0.136392] pci_bus 0000:05: resource 8 [mem 0x000c0000-0x000dffff] |
| [ 0.136394] pci_bus 0000:05: resource 9 [mem 0x000e0000-0x000fffff] |
| [ 0.136396] pci_bus 0000:05: resource 10 [mem 0x00100000-0x7fffffff] |
| [ 0.136421] NET: Registered protocol family 2 |
| [ 0.136491] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.137015] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) |
| [ 0.138399] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.138736] TCP: Hash tables configured (established 262144 bind 65536) |
| [ 0.138738] TCP reno registered |
| [ 0.138747] UDP hash table entries: 1024 (order: 3, 32768 bytes) |
| [ 0.138763] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) |
| [ 0.138823] NET: Registered protocol family 1 |
| [ 0.138831] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled |
| [ 0.192188] pci 0000:02:00.0: Boot video device |
| [ 0.192197] PCI: CLS 64 bytes, default 64 |
| [ 0.192236] Trying to unpack rootfs image as initramfs... |
| [ 2.022658] Freeing initrd memory: 102524k freed |
| [ 2.058980] IBS: LVT offset 1 assigned |
| [ 2.058997] perf: AMD IBS detected (0x0000001f) |
| [ 2.059033] microcode: CPU0: patch_level=0x010000db |
| [ 2.059038] microcode: CPU1: patch_level=0x010000db |
| [ 2.059052] microcode: CPU2: patch_level=0x010000db |
| [ 2.059105] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 2.059238] audit: initializing netlink socket (disabled) |
| [ 2.059249] type=2000 audit(1435814255.052:1): initialized |
| [ 2.083533] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 2.085108] VFS: Disk quotas dquot_6.5.2 |
| [ 2.085147] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 2.085448] fuse init (API version 7.18) |
| [ 2.085533] msgmni has been set to 3244 |
| [ 2.086472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) |
| [ 2.086476] io scheduler noop registered |
| [ 2.086477] io scheduler deadline registered (default) |
| [ 2.086522] io scheduler cfq registered |
| [ 2.086730] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X |
| [ 2.086880] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X |
| [ 2.086957] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 2.086972] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 2.086974] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 2.087231] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 |
| [ 2.087237] ACPI: Power Button [PWRB] |
| [ 2.087265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 2.087268] ACPI: Power Button [PWRF] |
| [ 2.087316] ACPI: Fan [FAN0] (on) |
| [ 2.087515] BIOS reported wrong ACPI id for the processor |
| [ 2.087522] BIOS reported wrong ACPI id for the processor |
| [ 2.087529] BIOS reported wrong ACPI id for the processor |
| [ 2.112068] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 2.112070] ACPI: Thermal Zone [TZ00] (40 C) |
| [ 2.112494] GHES: HEST is not enabled! |
| [ 2.112557] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled |
| [ 2.133220] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| [ 2.134806] Linux agpgart interface v0.103 |
| [ 2.134837] ipmi message handler version 39.2 |
| [ 2.136146] brd: module loaded |
| [ 2.136839] loop: module loaded |
| [ 2.137189] Fixed MDIO Bus: probed |
| [ 2.137224] tun: Universal TUN/TAP device driver, 1.6 |
| [ 2.137225] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| [ 2.137277] PPP generic driver version 2.4.2 |
| [ 2.137337] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.137425] ehci_hcd 0000:00:12.2: EHCI Host Controller |
| [ 2.137432] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 2.137442] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.137469] ehci_hcd 0000:00:12.2: debug port 1 |
| [ 2.137499] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd3509400 |
| [ 2.148027] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 2.148043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.148046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.148048] usb usb1: Product: EHCI Host Controller |
| [ 2.148050] usb usb1: Manufacturer: Linux 3.3.0-custom ehci_hcd |
| [ 2.148052] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 2.148147] hub 1-0:1.0: USB hub found |
| [ 2.148150] hub 1-0:1.0: 6 ports detected |
| [ 2.148345] ehci_hcd 0000:00:13.2: EHCI Host Controller |
| [ 2.148350] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 2.148358] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.148383] ehci_hcd 0000:00:13.2: debug port 1 |
| [ 2.148409] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd3509500 |
| [ 2.160028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 2.160038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.160040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.160042] usb usb2: Product: EHCI Host Controller |
| [ 2.160046] usb usb2: Manufacturer: Linux 3.3.0-custom ehci_hcd |
| [ 2.160047] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 2.160119] hub 2-0:1.0: USB hub found |
| [ 2.160122] hub 2-0:1.0: 6 ports detected |
| [ 2.160236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.160314] ohci_hcd 0000:00:12.0: OHCI Host Controller |
| [ 2.160319] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| [ 2.160348] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd3504000 |
| [ 2.220018] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.220021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.220023] usb usb3: Product: OHCI Host Controller |
| [ 2.220025] usb usb3: Manufacturer: Linux 3.3.0-custom ohci_hcd |
| [ 2.220027] usb usb3: SerialNumber: 0000:00:12.0 |
| [ 2.220108] hub 3-0:1.0: USB hub found |
| [ 2.220116] hub 3-0:1.0: 3 ports detected |
| [ 2.220284] ohci_hcd 0000:00:12.1: OHCI Host Controller |
| [ 2.220289] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 |
| [ 2.220305] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd3505000 |
| [ 2.280017] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.280019] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.280021] usb usb4: Product: OHCI Host Controller |
| [ 2.280023] usb usb4: Manufacturer: Linux 3.3.0-custom ohci_hcd |
| [ 2.280025] usb usb4: SerialNumber: 0000:00:12.1 |
| [ 2.280106] hub 4-0:1.0: USB hub found |
| [ 2.280112] hub 4-0:1.0: 3 ports detected |
| [ 2.280279] ohci_hcd 0000:00:13.0: OHCI Host Controller |
| [ 2.280284] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 |
| [ 2.280310] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd3506000 |
| [ 2.340017] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.340019] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.340021] usb usb5: Product: OHCI Host Controller |
| [ 2.340023] usb usb5: Manufacturer: Linux 3.3.0-custom ohci_hcd |
| [ 2.340025] usb usb5: SerialNumber: 0000:00:13.0 |
| [ 2.340104] hub 5-0:1.0: USB hub found |
| [ 2.340110] hub 5-0:1.0: 3 ports detected |
| [ 2.340278] ohci_hcd 0000:00:13.1: OHCI Host Controller |
| [ 2.340285] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 |
| [ 2.340299] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd3507000 |
| [ 2.400017] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.400020] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.400022] usb usb6: Product: OHCI Host Controller |
| [ 2.400024] usb usb6: Manufacturer: Linux 3.3.0-custom ohci_hcd |
| [ 2.400025] usb usb6: SerialNumber: 0000:00:13.1 |
| [ 2.400107] hub 6-0:1.0: USB hub found |
| [ 2.400114] hub 6-0:1.0: 3 ports detected |
| [ 2.400266] ohci_hcd 0000:00:14.5: OHCI Host Controller |
| [ 2.400271] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 |
| [ 2.400286] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd3508000 |
| [ 2.460016] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.460020] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.460022] usb usb7: Product: OHCI Host Controller |
| [ 2.460023] usb usb7: Manufacturer: Linux 3.3.0-custom ohci_hcd |
| [ 2.460025] usb usb7: SerialNumber: 0000:00:14.5 |
| [ 2.460106] hub 7-0:1.0: USB hub found |
| [ 2.460112] hub 7-0:1.0: 2 ports detected |
| [ 2.460219] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 2.460254] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| [ 2.494514] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.494614] mousedev: PS/2 mouse device common for all mice |
| [ 2.494756] rtc_cmos 00:01: RTC can wake from S4 |
| [ 2.494868] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 |
| [ 2.494908] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 2.495012] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com |
| [ 2.495021] cpuidle: using governor ladder |
| [ 2.495022] cpuidle: using governor menu |
| [ 2.495024] EFI Variables Facility v0.08 2004-May-17 |
| [ 2.495067] TCP cubic registered |
| [ 2.495151] NET: Registered protocol family 10 |
| [ 2.495279] NET: Registered protocol family 17 |
| [ 2.495282] Registering the dns_resolver key type |
| [ 2.495393] PM: Hibernation image not present or could not be loaded. |
| [ 2.495406] registered taskstats version 1 |
| [ 2.500812] IMA: No TPM chip found, activating TPM-bypass! |
| [ 2.501092] Magic number: 7:402:263 |
| [ 2.501173] rtc_cmos 00:01: setting system clock to 2015-07-02 05:17:36 UTC (1435814256) |
| [ 2.501205] powernow-k8: Found 1 AMD Phenom(tm) II X3 710 Processor (3 cpu cores) (version 2.20.00) |
| [ 2.501236] powernow-k8: 0 : pstate 0 (2600 MHz) |
| [ 2.501237] powernow-k8: 1 : pstate 1 (1900 MHz) |
| [ 2.501420] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found |
| [ 2.501422] EDD information not available. |
| [ 2.502629] Freeing unused kernel memory: 756k freed |
| [ 2.502807] Write protecting the kernel read-only data: 10240k |
| [ 2.503679] Freeing unused kernel memory: 284k freed |
| [ 2.507535] Freeing unused kernel memory: 1408k freed |
| [ 2.518848] systemd-udevd[127]: starting version 204 |
| [ 2.532731] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 2.532782] r8169 0000:04:00.0: (unregistered net_device): unknown MAC, using family default |
| [ 2.542963] ahci 0000:00:11.0: version 3.0 |
| [ 2.543029] ahci 0000:00:11.0: irq 42 for MSI/MSI-X |
| [ 2.543143] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode |
| [ 2.543147] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc |
| [ 2.543729] r8169 0000:04:00.0: irq 43 for MSI/MSI-X |
| [ 2.543902] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000916000, ff:ff:ff:ff:ff:ff, XID 9cf0f8ff IRQ 43 |
| [ 2.543906] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] |
| [ 2.544171] scsi0 : ahci |
| [ 2.544363] scsi1 : ahci |
| [ 2.544420] scsi2 : ahci |
| [ 2.545055] scsi3 : ahci |
| [ 2.545156] ata1: SATA max UDMA/133 abar m1024@0xd3509000 port 0xd3509100 irq 42 |
| [ 2.545160] ata2: SATA max UDMA/133 abar m1024@0xd3509000 port 0xd3509180 irq 42 |
| [ 2.545165] ata3: SATA max UDMA/133 abar m1024@0xd3509000 port 0xd3509200 irq 42 |
| [ 2.545171] ata4: SATA max UDMA/133 abar m1024@0xd3509000 port 0xd3509280 irq 42 |
| [ 2.545665] scsi4 : pata_atiixp |
| [ 2.545719] scsi5 : pata_atiixp |
| [ 2.545940] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4010 irq 14 |
| [ 2.545943] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4018 irq 15 |
| [ 2.596088] firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 |
| [ 2.608029] usb 4-3: new low-speed USB device number 2 using ohci_hcd |
| [ 2.779819] usb 4-3: New USB device found, idVendor=04d9, idProduct=2011 |
| [ 2.779822] usb 4-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 |
| [ 2.779824] usb 4-3: Product: USB Keyboard |
| [ 2.795952] input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input2 |
| [ 2.796087] generic-usb 0003:04D9:2011.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:12.1-3/input0 |
| [ 2.821856] input: USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input3 |
| [ 2.821971] generic-usb 0003:04D9:2011.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:12.1-3/input1 |
| [ 2.821985] usbcore: registered new interface driver usbhid |
| [ 2.821986] usbhid: USB HID core driver |
| [ 2.864099] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 2.864145] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.864196] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 3.036041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 3.037610] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133 |
| [ 3.037613] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 3.038718] ata1.00: configured for UDMA/133 |
| [ 3.038844] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5 |
| [ 3.038981] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 3.038991] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) |
| [ 3.039136] sd 0:0:0:0: [sda] Write Protect is off |
| [ 3.039138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.039202] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.056029] Refined TSC clocksource calibration: 2606.614 MHz. |
| [ 3.056034] Switching to clocksource tsc |
| [ 3.078635] sda: sda1 sda2 < sda5 > |
| [ 3.078926] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.381305] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 10.779193] Adding 2092028k swap on /dev/sda5. Priority:-1 extents:1 across:2092028k |
| [ 11.146925] systemd-udevd[306]: starting version 204 |
| [ 11.954847] MCE: In-kernel MCE decoding enabled. |
| [ 11.964010] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 12.024630] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMB0 1 (20120111/utaddress-251) |
| [ 12.024637] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 12.082049] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 12.101867] EDAC MC: Ver: 2.1.0 |
| [ 12.140462] AMD64 EDAC driver v3.4.0 |
| [ 12.140918] EDAC amd64: DRAM ECC disabled. |
| [ 12.140925] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| [ 12.140926] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| [ 12.140927] (Note that use of the override may cause unknown side effects.) |
| [ 12.224246] AppArmor DFA next/check upper bounds error |
| [ 12.224333] type=1400 audit(1435814266.219:2): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=341 comm="apparmor_parser" name="/sbin/dhclient" offset=24968 |
| [ 12.224339] type=1400 audit(1435814266.219:3): apparmor="STATUS" operation="profile_replace" pid=341 comm="apparmor_parser" |
| [ 12.235216] AppArmor DFA next/check upper bounds error |
| [ 12.235302] type=1400 audit(1435814266.227:4): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=346 comm="apparmor_parser" name="/sbin/dhclient" offset=24968 |
| [ 12.235308] type=1400 audit(1435814266.227:5): apparmor="STATUS" operation="profile_replace" pid=346 comm="apparmor_parser" |
| [ 12.240575] lp: driver loaded but no devices found |
| [ 12.257463] ppdev: user-space parallel port driver |
| [ 12.268900] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 |
| [ 12.268983] SP5100 TCO timer: mmio address 0xfec000f0 already in use |
| [ 12.661423] [drm] Initialized drm 1.1.0 20060810 |
| [ 12.939659] wmi: Mapper loaded |
| [ 13.668671] hda-intel: Using LPIB position fix |
| [ 13.700115] hda-intel: Enable sync_write for stable communication |
| [ 13.782297] hda_codec: ALC889A: BIOS auto-probing. |
| [ 13.782302] SKU: Nid=0x0 sku_cfg=0x00000885 |
| [ 13.782304] SKU: port_connectivity=0x0 |
| [ 13.782305] SKU: enable_pcbeep=0x1 |
| [ 13.782306] SKU: check_sum=0x00000000 |
| [ 13.782307] SKU: customization=0x00000000 |
| [ 13.782308] SKU: external_amp=0x0 |
| [ 13.782309] SKU: platform_type=0x1 |
| [ 13.782310] SKU: swap=0x0 |
| [ 13.782311] SKU: override=0x1 |
| [ 13.782315] autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 13.782317] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 13.782318] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 13.782319] mono: mono_out=0x0 |
| [ 13.782320] dig-out=0x1e/0x0 |
| [ 13.782321] inputs: Rear Mic=0x18 Front Mic=0x19 Line=0x1a CD=0x1c |
| [ 13.782325] dig-in=0x1f |
| [ 13.786357] realtek: Enabling init ASM_ID=0x0885 CODEC_ID=10ec0885 |
| [ 13.798671] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 |
| [ 13.798757] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 |
| [ 13.798827] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 |
| [ 13.798890] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 |
| [ 13.798953] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 |
| [ 13.799017] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 |
| [ 13.799076] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 |
| [ 13.799143] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 |
| [ 16.358715] VGA switcheroo: detected Optimus DSM method \ handle |
| [ 16.359397] [drm] nouveau 0000:02:00.0: Unsupported chipset 0xffffffff |
| [ 16.359686] nouveau: probe of 0000:02:00.0 failed with error -22 |
| [ 17.221247] init: udev-fallback-graphics main process (524) terminated with status 1 |
| [ 44.000176] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended |
| [ 44.000443] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 44.269839] init: failsafe main process (629) killed by TERM signal |
| [ 44.866480] init: avahi-cups-reload main process (735) terminated with status 1 |
| [ 44.963932] AppArmor DFA next/check upper bounds error |
| [ 44.963943] type=1400 audit(1435814298.955:6): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=708 comm="apparmor_parser" name="/sbin/dhclient" offset=24968 |
| [ 44.963949] type=1400 audit(1435814298.955:7): apparmor="STATUS" operation="profile_replace" pid=708 comm="apparmor_parser" |
| [ 45.211855] AppArmor DFA next/check upper bounds error |
| [ 45.211869] type=1400 audit(1435814299.203:8): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=730 comm="apparmor_parser" name="/usr/lib/cups/backend/cups-pdf" offset=24048 |
| [ 45.211876] type=1400 audit(1435814299.203:9): apparmor="STATUS" operation="profile_replace" pid=730 comm="apparmor_parser" |
| [ 45.290470] AppArmor DFA next/check upper bounds error |
| [ 45.290482] type=1400 audit(1435814299.283:10): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=707 comm="apparmor_parser" name="/usr/lib/lightdm/lightdm-guest-session" offset=14992 |
| [ 45.290489] type=1400 audit(1435814299.283:11): apparmor="STATUS" operation="profile_replace" pid=707 comm="apparmor_parser" |
| [ 45.290535] AppArmor DFA next/check upper bounds error |
| [ 45.290539] type=1400 audit(1435814299.283:12): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=707 comm="apparmor_parser" name="/usr/lib/lightdm/lightdm-guest-session//chromium" offset=12320 |
| [ 45.290544] type=1400 audit(1435814299.283:13): apparmor="STATUS" operation="profile_replace" pid=707 comm="apparmor_parser" |
| [ 45.444848] AppArmor DFA next/check upper bounds error |
| [ 45.444861] type=1400 audit(1435814299.439:14): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=758 comm="apparmor_parser" name="/usr/sbin/cups-browsed" offset=22400 |
| [ 45.444868] type=1400 audit(1435814299.439:15): apparmor="STATUS" operation="profile_replace" pid=758 comm="apparmor_parser" |
| [ 46.006847] AppArmor DFA next/check upper bounds error |
| [ 46.031792] AppArmor DFA next/check upper bounds error |
| [ 46.181237] AppArmor DFA next/check upper bounds error |
| [ 46.393117] Bluetooth: Core ver 2.16 |
| [ 46.393139] NET: Registered protocol family 31 |
| [ 46.393141] Bluetooth: HCI device and connection manager initialized |
| [ 46.393143] Bluetooth: HCI socket layer initialized |
| [ 46.393145] Bluetooth: L2CAP socket layer initialized |
| [ 46.393148] Bluetooth: SCO socket layer initialized |
| [ 46.596333] Bluetooth: RFCOMM TTY layer initialized |
| [ 46.596341] Bluetooth: RFCOMM socket layer initialized |
| [ 46.596343] Bluetooth: RFCOMM ver 1.11 |
| [ 46.599052] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 46.599054] Bluetooth: BNEP filters: protocol multicast |
| [ 46.904254] AppArmor DFA next/check upper bounds error |
| [ 48.652063] AppArmor DFA next/check upper bounds error |
| [ 48.652152] AppArmor DFA next/check upper bounds error |
| [ 51.231813] mtrr: base(0xd1000000) is not aligned on a size(0xe00000) boundary |
| [ 51.912789] init: plymouth-upstart-bridge main process ended, respawning |
| [ 51.917637] init: plymouth-upstart-bridge main process (1051) terminated with status 1 |
| [ 51.917646] init: plymouth-upstart-bridge main process ended, respawning |