blob: 638e7f62ab025b35b0bd01cecbea18068c75aac8 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Emulation QEMU x86 q35/ich9/QEMU x86 q35/ich9, BIOS 4.5-269-gc446704-dirty 11/14/2016
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges disabled:
[ 0.000000] 00000-FFFFF uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ee00000-0x1effffff]
[ 0.000000] [mem 0x1ee00000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1edfffff]
[ 0.000000] [mem 0x1c000000-0x1edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1ff9ffff]
[ 0.000000] [mem 0x1f000000-0x1fdfffff] page 2M
[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1f0c7000-0x1fe79fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0830 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000001FFB10E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000001FFB2DC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000001FFB1280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150619)
[ 0.000000] ACPI: FACS 0x000000001FFB1240 000040
[ 0.000000] ACPI: SSDT 0x000000001FFB2EC0 000068 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000001FFB2F30 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000001FFB2F70 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000001FFB2FB0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000001FFB3010 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e000000-ffff88001e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
[ 0.000000] On node 0 totalpages: 130878
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1735 pages used for memmap
[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001ee00000 s80896 r8192 d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1ee0d080
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 489580K/523512K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 33932K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 1600.019 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 3200.03 BogoMIPS (lpj=6400076)
[ 0.009427] pid_max: default: 32768 minimum: 301
[ 0.012022] ACPI: Core revision 20140424
[ 0.017350] ACPI: All ACPI Tables successfully acquired
[ 0.020191] Security Framework initialized
[ 0.022275] AppArmor: AppArmor disabled by boot time parameter
[ 0.024008] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.028102] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.032250] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.036118] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.040012] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.044239] Initializing cgroup subsys memory
[ 0.046463] Initializing cgroup subsys devices
[ 0.048024] Initializing cgroup subsys freezer
[ 0.050316] Initializing cgroup subsys net_cls
[ 0.052019] Initializing cgroup subsys blkio
[ 0.054207] Initializing cgroup subsys perf_event
[ 0.056011] Initializing cgroup subsys net_prio
[ 0.060163] mce: CPU supports 10 MCE banks
[ 0.062328] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
tlb_flushall_shift: -1
[ 0.082036] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.094134] ftrace: allocating 21614 entries in 85 pages
[ 0.112892] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.115803] smpboot: CPU0: AMD Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.124000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.124011] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
[ 0.130852] x86: Booted up 1 node, 1 CPUs
[ 0.132007] smpboot: Total of 1 processors activated (3200.03 BogoMIPS)
[ 0.136658] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.140346] devtmpfs: initialized
[ 0.150365] pinctrl core: initialized pinctrl subsystem
[ 0.152146] NET: Registered protocol family 16
[ 0.154639] cpuidle: using governor ladder
[ 0.156017] cpuidle: using governor menu
[ 0.158165] ACPI: bus type PCI registered
[ 0.160006] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.164306] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[ 0.168006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[ 0.172689] PCI: Using configuration type 1 for base access
[ 0.177934] ACPI: Added _OSI(Module Device)
[ 0.180005] ACPI: Added _OSI(Processor Device)
[ 0.182150] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.184006] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.196011] ACPI: Interpreter enabled
[ 0.197797] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.201088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.206651] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.210623] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.216007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
[ 0.220004] ACPI: (supports S0)
[ 0.221559] ACPI: Using IOAPIC for interrupt routing
[ 0.224065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.234253] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.236012] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.240499] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.244233] PCI host bridge to bus 0000:00
[ 0.246262] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.248007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.252007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.256007] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.259367] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[ 0.260098] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.264377] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
[ 0.268008] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.274640] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
[ 0.300008] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
[ 0.300376] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
[ 0.306502] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
[ 0.310509] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
[ 0.336006] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
[ 0.336912] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.337936] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.340050] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
[ 0.344645] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.372006] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
[ 0.376006] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
[ 0.380983] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.381511] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
[ 0.384738] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
[ 0.388264] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
[ 0.391804] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
[ 0.393483] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.396965] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
[ 0.401405] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
[ 0.405107] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
[ 0.409251] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
[ 0.413116] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
[ 0.416375] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
[ 0.420271] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
[ 0.423509] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
[ 0.424474] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
[ 0.428240] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
[ 0.430946] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
[ 0.432454] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
[ 0.436888] ACPI: Enabled 16 GPEs in block 00 to 3F
[ 0.439610] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.440000] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.440005] vgaarb: loaded
[ 0.444004] vgaarb: bridge control possible 0000:00:01.0
[ 0.446743] PCI: Using ACPI for IRQ routing
[ 0.606920] PCI: pci_cache_line_size set to 64 bytes
[ 0.607169] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.607174] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
[ 0.607497] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.608048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.612602] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.621163] Switched to clocksource kvm-clock
[ 0.640272] pnp: PnP ACPI init
[ 0.643110] ACPI: bus type PNP registered
[ 0.649294] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.649584] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.649786] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.650202] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.650483] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.651790] pnp: PnP ACPI: found 5 devices
[ 0.655039] ACPI: bus type PNP unregistered
[ 0.666575] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
[ 0.669141] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.669146] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.669151] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.669154] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
[ 0.669210] NET: Registered protocol family 2
[ 0.671265] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.674090] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.676631] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.679221] TCP: reno registered
[ 0.680559] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.682970] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.685569] NET: Registered protocol family 1
[ 0.687353] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.687467] PCI: CLS 64 bytes, default 64
[ 0.687546] Unpacking initramfs...
[ 1.219101] Freeing initrd memory: 14028K (ffff88001f0c7000 - ffff88001fe7a000)
[ 1.222504] microcode: AMD CPU family 0x6 not supported
[ 1.225169] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.227680] audit: initializing netlink subsys (disabled)
[ 1.229834] audit: type=2000 audit(1479146888.334:1): initialized
[ 1.232676] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.235153] zbud: loaded
[ 1.236405] VFS: Disk quotas dquot_6.5.2
[ 1.237945] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.240510] msgmni has been set to 983
[ 1.242535] alg: No test for stdrng (krng)
[ 1.244269] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.247293] io scheduler noop registered
[ 1.248915] io scheduler deadline registered
[ 1.250705] io scheduler cfq registered (default)
[ 1.252756] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.255044] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.257755] GHES: HEST is not enabled!
[ 1.259366] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.304998] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.308682] Linux agpgart interface v0.103
[ 1.310548] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.315336] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.317380] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.319696] mousedev: PS/2 mouse device common for all mice
[ 1.322702] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.326309] rtc_cmos 00:00: RTC can wake from S4
[ 1.329170] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.332083] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.335158] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.337800] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.340697] AMD IOMMUv2 functionality not available on this system
[ 1.343621] TCP: cubic registered
[ 1.345168] NET: Registered protocol family 10
[ 1.347461] mip6: Mobile IPv6
[ 1.349028] NET: Registered protocol family 17
[ 1.351036] mpls_gso: MPLS GSO support
[ 1.353174] registered taskstats version 1
[ 1.355649] rtc_cmos 00:00: setting system clock to 2016-11-14 18:08:07 UTC (1479146887)
[ 1.359312] PM: Hibernation image not present or could not be loaded.
[ 1.361923] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 1.365428] Write protecting the kernel read-only data: 8192k
[ 1.374633] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 1.379618] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 1.404268] systemd-udevd[52]: starting version 215
[ 1.407040] random: systemd-udevd urandom read with 3 bits of entropy available
[ 1.430578] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.433780] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.442537] SCSI subsystem initialized
[ 1.449289] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
[ 1.454518] Floppy drive(s): fd0 is 1.44M
[ 1.473046] FDC 0 is a S82078B
[ 1.477054] libata version 3.00 loaded.
[ 1.889282] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
[ 1.892227] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.895050] ahci 0000:00:1f.2: version 3.0
[ 1.895738] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
[ 1.898416] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.899334] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 1.902589] ahci 0000:00:1f.2: flags: ncq only
[ 1.908681] scsi0 : ahci
[ 1.910071] scsi1 : ahci
[ 1.911392] scsi2 : ahci
[ 1.912715] scsi3 : ahci
[ 1.914023] scsi4 : ahci
[ 1.915293] scsi5 : ahci
[ 1.916592] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
[ 1.919467] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
[ 1.922408] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
[ 1.925309] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
[ 1.928359] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
[ 1.931382] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
[ 2.220249] tsc: Refined TSC clocksource calibration: 1600.060 MHz
[ 2.252655] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.257508] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.262054] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.265064] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.268080] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.271096] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.303747] FS-Cache: Loaded
[ 2.311838] RPC: Registered named UNIX socket transport module.
[ 2.315748] RPC: Registered udp transport module.
[ 2.319482] RPC: Registered tcp transport module.
[ 2.322595] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.334477] FS-Cache: Netfs 'nfs' registered for caching
[ 2.356372] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.357160] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 4.363784] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.571644] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.577471] systemd[1]: Detected virtualization 'kvm'.
[ 4.579526] systemd[1]: Detected architecture 'x86-64'.
[ 4.639787] systemd[1]: Inserted module 'autofs4'
[ 4.644665] systemd[1]: Set hostname to <cb-test-tgt>.
[ 5.019401] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 5.025251] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.033592] systemd[1]: Expecting device dev-ttyS0.device...
[ 5.039934] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.043860] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.047707] systemd[1]: Starting Remote File Systems (Pre).
[ 5.054688] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.057933] systemd[1]: Starting Encrypted Volumes.
[ 5.064242] systemd[1]: Reached target Encrypted Volumes.
[ 5.066943] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.076545] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.081431] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.085744] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.090959] systemd[1]: Starting Paths.
[ 5.097083] systemd[1]: Reached target Paths.
[ 5.099316] systemd[1]: Starting Swap.
[ 5.104754] systemd[1]: Reached target Swap.
[ 5.106953] systemd[1]: Starting Root Slice.
[ 5.112840] systemd[1]: Created slice Root Slice.
[ 5.115225] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.122034] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.124950] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.133547] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.137109] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.144690] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.147751] systemd[1]: Starting udev Kernel Socket.
[ 5.154353] systemd[1]: Listening on udev Kernel Socket.
[ 5.157184] systemd[1]: Starting udev Control Socket.
[ 5.163836] systemd[1]: Listening on udev Control Socket.
[ 5.166717] systemd[1]: Starting User and Session Slice.
[ 5.174198] systemd[1]: Created slice User and Session Slice.
[ 5.177202] systemd[1]: Starting Journal Socket.
[ 5.183465] systemd[1]: Listening on Journal Socket.
[ 5.186061] systemd[1]: Starting System Slice.
[ 5.191992] systemd[1]: Created slice System Slice.
[ 5.194560] systemd[1]: Starting Increase datagram queue length...
[ 5.201961] systemd[1]: Starting udev Coldplug all Devices...
[ 5.223637] systemd[1]: Starting Load Kernel Modules...
[ 5.266508] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.300149] systemd[1]: Mounting Debug File System...
[ 5.320213] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.348410] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.372064] systemd[1]: Mounting Huge Pages File System...
[ 5.389024] systemd[1]: Starting system-getty.slice.
[ 5.405435] systemd[1]: Created slice system-getty.slice.
[ 5.408905] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 5.419299] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 5.422923] systemd[1]: Starting Slices.
[ 5.430695] systemd[1]: Reached target Slices.
[ 5.432912] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.450534] systemd[1]: Mounted Huge Pages File System.
[ 5.461015] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.469125] systemd[1]: Mounted Debug File System.
[ 5.476537] systemd[1]: Started Increase datagram queue length.
[ 5.485888] systemd[1]: Started Load Kernel Modules.
[ 5.508068] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.522393] systemd[1]: Started Remount Root and Kernel File Systems.
[ 5.533097] systemd[1]: Started udev Coldplug all Devices.
[ 5.602259] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 5.606172] systemd[1]: Starting Load/Save Random Seed...
[ 5.612935] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.627892] systemd[1]: Starting Apply Kernel Variables...
[ 5.648785] systemd[1]: Mounted Configuration File System.
[ 5.659852] systemd[1]: Mounted FUSE Control File System.
[ 5.676807] systemd[1]: Starting Syslog Socket.
[ 5.697952] systemd[1]: Listening on Syslog Socket.
[ 5.701097] systemd[1]: Starting Sockets.
[ 5.719638] systemd[1]: Reached target Sockets.
[ 5.723294] systemd[1]: Starting Journal Service...
[ 5.744203] systemd[1]: Started Journal Service.
[ 5.892559] systemd-udevd[146]: starting version 215
[ 6.263389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.269518] ACPI: Power Button [PWRF]
[ 6.293783] parport_pc 00:03: reported by Plug and Play ACPI
[ 6.341549] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.401093] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
[ 6.465781] [drm] Initialized drm 1.1.0 20060810
[ 6.472188] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.480605] i801_smbus 0000:00:1f.3: Enabling SMBus device
[ 6.483379] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.608137] ppdev: user-space parallel port driver
[ 6.632892] iTCO_vendor_support: vendor-support=0
[ 6.654021] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.660193] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
[ 6.663618] iTCO_wdt: timeout value out of range, using 30
[ 6.672150] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.036636] Key type dns_resolver registered
[ 7.074872] NFS: Registering the id_resolver key type
[ 7.078474] Key type id_resolver registered
[ 7.081249] Key type id_legacy registered
[ 7.364087] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.411315] systemd-journald[145]: Received request to flush runtime journal from PID 1
[ 7.452068] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.474056] random: nonblocking pool is initialized
[ 37.747834] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****