blob: 218ffe8bb83a9bb2a948549ef04a207ce94a23cb [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Qemu q35/q35, BIOS RAPTOR-NORMAL 12/01/2015
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges disabled:
[ 0.000000] 00000-FFFFF uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
[ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
[ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff]
[ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M
[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F1900 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000001FFBADC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000001FFB9280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150204)
[ 0.000000] ACPI: FACS 0x000000001FFB9240 000040
[ 0.000000] ACPI: MCFG 0x000000001FFBAEC0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000001FFBAF00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000001FFBAF40 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000001FFBAFA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
[ 0.000000] On node 0 totalpages: 130878
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1735 pages used for memmap
[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2393.998 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 4787.99 BogoMIPS (lpj=9575992)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] ACPI: Core revision 20140424
[ 0.008327] ACPI: All ACPI Tables successfully acquired
[ 0.009211] Security Framework initialized
[ 0.009858] AppArmor: AppArmor disabled by boot time parameter
[ 0.010759] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.011818] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.012116] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.013232] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.014270] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.016187] Initializing cgroup subsys memory
[ 0.016891] Initializing cgroup subsys devices
[ 0.017592] Initializing cgroup subsys freezer
[ 0.018289] Initializing cgroup subsys net_cls
[ 0.018986] Initializing cgroup subsys blkio
[ 0.020009] Initializing cgroup subsys perf_event
[ 0.020741] Initializing cgroup subsys net_prio
[ 0.021565] mce: CPU supports 10 MCE banks
[ 0.022250] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
tlb_flushall_shift: 6
[ 0.032647] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[ 0.037016] ftrace: allocating 21601 entries in 85 pages
[ 0.044965] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.045849] smpboot: CPU0: Intel QEMU Virtual CPU version 2.0.0 (fam: 06, model: 02, stepping: 03)
[ 0.052000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.052000] x86: Booted up 1 node, 1 CPUs
[ 0.052000] smpboot: Total of 1 processors activated (4787.99 BogoMIPS)
[ 0.052237] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.053351] devtmpfs: initialized
[ 0.058774] pinctrl core: initialized pinctrl subsystem
[ 0.059633] NET: Registered protocol family 16
[ 0.060124] cpuidle: using governor ladder
[ 0.060813] cpuidle: using governor menu
[ 0.061463] ACPI: bus type PCI registered
[ 0.062069] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.063139] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[ 0.064006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[ 0.065511] PCI: Using configuration type 1 for base access
[ 0.067114] ACPI: Added _OSI(Module Device)
[ 0.068002] ACPI: Added _OSI(Processor Device)
[ 0.068674] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.069379] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.073216] ACPI: Interpreter enabled
[ 0.073787] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.075181] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.076340] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.077738] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.079128] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
[ 0.080338] ACPI: (supports S0)
[ 0.080819] ACPI: Using IOAPIC for interrupt routing
[ 0.081587] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.085266] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.086201] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.087541] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.088094] PCI host bridge to bus 0000:00
[ 0.088721] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.089537] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.090451] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.092003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.093084] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[ 0.094135] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.094424] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
[ 0.096005] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.098260] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
[ 0.109072] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
[ 0.109210] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
[ 0.112004] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
[ 0.114063] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
[ 0.124004] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
[ 0.124292] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.124594] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.125791] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
[ 0.127020] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.137036] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
[ 0.140004] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
[ 0.142348] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.142507] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
[ 0.142941] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
[ 0.144042] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
[ 0.145101] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
[ 0.146144] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.147187] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
[ 0.148214] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
[ 0.149262] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
[ 0.150303] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
[ 0.151289] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
[ 0.152148] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
[ 0.152977] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
[ 0.153800] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
[ 0.154626] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
[ 0.155450] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
[ 0.156148] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
[ 0.156975] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
[ 0.157973] ACPI: Enabled 16 GPEs in block 00 to 3F
[ 0.158836] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.159689] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.160002] vgaarb: loaded
[ 0.160422] vgaarb: bridge control possible 0000:00:01.0
[ 0.161274] PCI: Using ACPI for IRQ routing
[ 0.210051] PCI: pci_cache_line_size set to 64 bytes
[ 0.210129] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.210131] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
[ 0.210274] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.211346] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.212099] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.215119] Switched to clocksource kvm-clock
[ 0.217695] pnp: PnP ACPI init
[ 0.218212] ACPI: bus type PNP registered
[ 0.218889] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.218942] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.218988] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.219086] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.219156] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.219419] pnp: PnP ACPI: found 5 devices
[ 0.220063] ACPI: bus type PNP unregistered
[ 0.226910] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
[ 0.227849] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.227852] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.227853] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.227855] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
[ 0.227878] NET: Registered protocol family 2
[ 0.228703] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.229769] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.230735] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.231689] TCP: reno registered
[ 0.232195] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.233067] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.234039] NET: Registered protocol family 1
[ 0.234725] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.234761] PCI: CLS 64 bytes, default 64
[ 0.234799] Unpacking initramfs...
[ 0.396873] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000)
[ 0.398171] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1
[ 0.399057] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.400592] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.401524] audit: initializing netlink subsys (disabled)
[ 0.402352] audit: type=2000 audit(1454059325.294:1): initialized
[ 0.403515] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.404514] zbud: loaded
[ 0.405049] VFS: Disk quotas dquot_6.5.2
[ 0.405656] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.406663] msgmni has been set to 983
[ 0.407471] alg: No test for stdrng (krng)
[ 0.408138] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.409283] io scheduler noop registered
[ 0.409886] io scheduler deadline registered
[ 0.410551] io scheduler cfq registered (default)
[ 0.411322] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.412194] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.413223] intel_idle: does not run on family 6 model 2
[ 0.413247] GHES: HEST is not enabled!
[ 0.413888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.440820] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.442244] Linux agpgart interface v0.103
[ 0.442976] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.444801] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.445556] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.446478] mousedev: PS/2 mouse device common for all mice
[ 0.447567] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.449055] rtc_cmos 00:00: RTC can wake from S4
[ 0.449989] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.451058] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.452240] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.453196] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.454180] AMD IOMMUv2 functionality not available on this system
[ 0.455189] TCP: cubic registered
[ 0.455712] NET: Registered protocol family 10
[ 0.456546] mip6: Mobile IPv6
[ 0.457014] NET: Registered protocol family 17
[ 0.457689] mpls_gso: MPLS GSO support
[ 0.458498] registered taskstats version 1
[ 0.459378] rtc_cmos 00:00: setting system clock to 2016-01-29 09:22:04 UTC (1454059324)
[ 0.460649] PM: Hibernation image not present or could not be loaded.
[ 0.461646] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[ 0.462828] Write protecting the kernel read-only data: 8192k
[ 0.465817] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[ 0.467532] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 0.476112] systemd-udevd[52]: starting version 215
[ 0.477097] random: systemd-udevd urandom read with 1 bits of entropy available
[ 0.484943] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.486024] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.487158] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
[ 0.824397] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
[ 0.825524] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.831940] FS-Cache: Loaded
[ 0.834782] RPC: Registered named UNIX socket transport module.
[ 0.835694] RPC: Registered udp transport module.
[ 0.836424] RPC: Registered tcp transport module.
[ 0.837137] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.840982] FS-Cache: Netfs 'nfs' registered for caching
[ 0.848413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1.396197] tsc: Refined TSC clocksource calibration: 2394.004 MHz
[ 2.852692] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 2.854923] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.496281] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.499424] systemd[1]: Detected virtualization 'kvm'.
[ 4.500680] systemd[1]: Detected architecture 'x86-64'.
[ 4.759418] systemd[1]: Inserted module 'autofs4'
[ 4.763973] systemd[1]: Set hostname to <cb-test-tgt>.
[ 5.340211] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 5.343323] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.347297] systemd[1]: Expecting device dev-ttyS0.device...
[ 5.350404] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.352272] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.354068] systemd[1]: Starting Remote File Systems (Pre).
[ 5.357423] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.358967] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.363554] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.365802] systemd[1]: Starting Encrypted Volumes.
[ 5.368900] systemd[1]: Reached target Encrypted Volumes.
[ 5.370206] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.372164] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.374034] systemd[1]: Starting Paths.
[ 5.376799] systemd[1]: Reached target Paths.
[ 5.377912] systemd[1]: Starting Swap.
[ 5.380553] systemd[1]: Reached target Swap.
[ 5.381580] systemd[1]: Starting Root Slice.
[ 5.384422] systemd[1]: Created slice Root Slice.
[ 5.385554] systemd[1]: Starting User and Session Slice.
[ 5.388851] systemd[1]: Created slice User and Session Slice.
[ 5.390293] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.393609] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.394999] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.399622] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.401299] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.405639] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.407079] systemd[1]: Starting udev Kernel Socket.
[ 5.410176] systemd[1]: Listening on udev Kernel Socket.
[ 5.411457] systemd[1]: Starting udev Control Socket.
[ 5.414679] systemd[1]: Listening on udev Control Socket.
[ 5.415972] systemd[1]: Starting Journal Socket.
[ 5.418971] systemd[1]: Listening on Journal Socket.
[ 5.420202] systemd[1]: Starting System Slice.
[ 5.423138] systemd[1]: Created slice System Slice.
[ 5.424344] systemd[1]: Starting system-getty.slice.
[ 5.427495] systemd[1]: Created slice system-getty.slice.
[ 5.428820] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 5.432341] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 5.433852] systemd[1]: Starting Increase datagram queue length...
[ 5.442897] systemd[1]: Starting Load Kernel Modules...
[ 5.447264] systemd[1]: Mounting Huge Pages File System...
[ 5.453229] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.481085] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.524688] random: nonblocking pool is initialized
[ 5.634064] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.659087] systemd[1]: Mounting Debug File System...
[ 5.682214] systemd[1]: Starting udev Coldplug all Devices...
[ 5.689815] systemd[1]: Starting Slices.
[ 5.693870] systemd[1]: Reached target Slices.
[ 5.698426] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.794570] systemd[1]: Mounted Debug File System.
[ 5.807402] systemd[1]: Mounted Huge Pages File System.
[ 5.814944] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.826033] systemd[1]: Started Increase datagram queue length.
[ 5.831526] systemd[1]: Started Load Kernel Modules.
[ 5.836089] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.844142] systemd[1]: Started Remount Root and Kernel File Systems.
[ 5.866970] systemd[1]: Started udev Coldplug all Devices.
[ 5.901938] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 5.903796] systemd[1]: Starting Load/Save Random Seed...
[ 5.907216] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.911694] systemd[1]: Starting Apply Kernel Variables...
[ 5.916574] systemd[1]: Mounted Configuration File System.
[ 5.918799] systemd[1]: Mounted FUSE Control File System.
[ 5.922274] systemd[1]: Starting Syslog Socket.
[ 5.930217] systemd[1]: Listening on Syslog Socket.
[ 5.931650] systemd[1]: Starting Sockets.
[ 5.944212] systemd[1]: Reached target Sockets.
[ 5.946317] systemd[1]: Starting Journal Service...
[ 5.963973] systemd[1]: Started Journal Service.
[ 6.250591] systemd-udevd[127]: starting version 215
[ 6.515719] systemd-journald[125]: Received request to flush runtime journal from PID 1
[ 7.287460] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.290111] ACPI: Power Button [PWRF]
[ 7.393435] Floppy drive(s): fd0 is 1.44M
[ 7.400284] parport_pc 00:03: reported by Plug and Play ACPI
[ 7.401763] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.405582] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.413263] FDC 0 is a S82078B
[ 7.416549] SCSI subsystem initialized
[ 7.485545] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
[ 7.489532] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
[ 7.491543] i801_smbus 0000:00:1f.3: Enabling SMBus device
[ 7.493725] [drm] Initialized drm 1.1.0 20060810
[ 7.501976] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 7.558065] libata version 3.00 loaded.
[ 7.696223] ahci 0000:00:1f.2: version 3.0
[ 7.696819] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 7.697292] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 7.699241] ahci 0000:00:1f.2: flags: ncq only
[ 7.746905] scsi0 : ahci
[ 7.763582] scsi1 : ahci
[ 7.766110] scsi2 : ahci
[ 7.773574] scsi3 : ahci
[ 7.783828] scsi4 : ahci
[ 7.806070] scsi5 : ahci
[ 7.806783] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
[ 7.809368] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
[ 7.811086] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
[ 7.813197] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
[ 7.814926] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
[ 7.816650] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
[ 7.819139] ppdev: user-space parallel port driver
[ 7.842360] iTCO_vendor_support: vendor-support=0
[ 7.852493] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.854425] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
[ 7.856199] iTCO_wdt: timeout value out of range, using 30
[ 7.858465] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.142526] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.152845] ata2: SATA link down (SStatus 0 SControl 300)
[ 8.158435] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.162499] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.164327] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.166202] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.522319] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 9.143162] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 39.625940] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
[ 284.848177] nfs: server 10.100.1.1 not responding, still trying
[ 288.407019] nfs: server 10.100.1.1 OK
[ 297.608186] nfs: server 10.100.1.1 not responding, still trying
[ 299.756455] nfs: server 10.100.1.1 OK
[ 327.508141] nfs: server 10.100.1.1 not responding, still trying
[ 337.676651] nfs: server 10.100.1.1 OK
[ 345.360187] nfs: server 10.100.1.1 not responding, still trying
[ 345.418019] nfs: server 10.100.1.1 OK
[ 360.368218] nfs: server 10.100.1.1 not responding, still trying
[ 361.462126] nfs: server 10.100.1.1 OK
[ 380.680166] nfs: server 10.100.1.1 not responding, still trying
[ 380.852342] nfs: server 10.100.1.1 OK
[ 424.992163] nfs: server 10.100.1.1 not responding, still trying
[ 431.828512] nfs: server 10.100.1.1 OK
[ 491.216150] nfs: server 10.100.1.1 not responding, still trying
[ 491.998783] nfs: server 10.100.1.1 OK