| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-357-gbaa1acd-dirty 11/22/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7990 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7B08 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFB7B40 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7B80 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7CF8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000 |
| [ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048377 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xa5ea000000-0xa5ebffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.814 MHz processor |
| [ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.62 BogoMIPS (lpj=7639256) |
| [ 0.010795] pid_max: default: 32768 minimum: 301 |
| [ 0.015450] ACPI: Core revision 20140424 |
| [ 0.021808] ACPI: All ACPI Tables successfully acquired |
| [ 0.027163] Security Framework initialized |
| [ 0.031289] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037133] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044882] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.058089] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.067873] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.074774] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.082631] Initializing cgroup subsys memory |
| [ 0.087003] Initializing cgroup subsys devices |
| [ 0.091473] Initializing cgroup subsys freezer |
| [ 0.095935] Initializing cgroup subsys net_cls |
| [ 0.100395] Initializing cgroup subsys blkio |
| [ 0.104680] Initializing cgroup subsys perf_event |
| [ 0.109390] Initializing cgroup subsys net_prio |
| [ 0.113969] tseg: 0000000000 |
| [ 0.113980] CPU: Physical Processor ID: 0 |
| [ 0.118008] CPU: Processor Core ID: 0 |
| [ 0.121690] mce: CPU supports 6 MCE banks |
| [ 0.125718] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130447] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.145785] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.154790] ftrace: allocating 21601 entries in 85 pages |
| [ 0.170157] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.215675] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.332509] Performance Events: AMD PMU driver. |
| [ 0.337081] ... version: 0 |
| [ 0.341093] ... bit width: 48 |
| [ 0.345192] ... generic registers: 4 |
| [ 0.349202] ... value mask: 0000ffffffffffff |
| [ 0.354505] ... max period: 00007fffffffffff |
| [ 0.359832] ... fixed-purpose events: 0 |
| [ 0.363844] ... event mask: 000000000000000f |
| [ 0.371763] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.379961] x86: Booting SMP configuration: |
| [ 0.384154] .... node #0, CPUs: #1 #2 #3 |
| [ 0.428502] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.581126] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.585428] smpboot: Total of 8 processors activated (30557.73 BogoMIPS) |
| [ 0.597941] devtmpfs: initialized |
| [ 0.609847] pinctrl core: initialized pinctrl subsystem |
| [ 0.615246] NET: Registered protocol family 16 |
| [ 0.619903] cpuidle: using governor ladder |
| [ 0.624010] cpuidle: using governor menu |
| [ 0.627947] node 0 link 1: io port [1000, 3fff] |
| [ 0.627950] TOM: 00000000c0000000 aka 3072M |
| [ 0.632145] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.632149] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.632152] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.632154] TOM2: 0000000180000000 aka 6144M |
| [ 0.636431] bus: [bus 00-05] on node 0 link 1 |
| [ 0.636433] bus: 00 [io 0x0000-0xffff] |
| [ 0.636434] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.636436] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.636543] ACPI: bus type PCI registered |
| [ 0.640557] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.647159] PCI: Using configuration type 1 for base access |
| [ 0.652735] PCI: Using configuration type 1 for extended access |
| [ 0.669318] ACPI: Added _OSI(Module Device) |
| [ 0.673516] ACPI: Added _OSI(Processor Device) |
| [ 0.677965] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.682678] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.691626] ACPI: Interpreter enabled |
| [ 0.695305] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.704570] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.713826] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.723098] ACPI: (supports S0 S1 S5) |
| [ 0.726767] ACPI: Using IOAPIC for interrupt routing |
| [ 0.731775] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.759750] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.765941] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.774154] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.811729] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.821762] PCI host bridge to bus 0000:00 |
| [ 0.825865] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.831356] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.837541] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.844410] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.851282] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.858161] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.864359] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.864557] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.864565] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.864712] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.864720] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.864744] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.864764] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.864789] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.864893] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.864901] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.864928] pci 0000:00:02.0: supports D1 D2 |
| [ 0.864957] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.865029] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.870748] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.870761] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.870810] pci 0000:00:02.1: supports D1 D2 |
| [ 0.870821] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.870881] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.876611] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.876637] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.876666] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.883806] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.890337] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.897476] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.904112] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.904127] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.904132] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.904137] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.904141] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.904146] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.904151] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.904295] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.904306] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.904311] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.904316] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.904320] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.904325] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.904330] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.904481] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.904577] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.910300] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.910349] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.910398] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.916121] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.916177] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.916244] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.921965] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.922015] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.922083] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.927807] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.927857] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.927920] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.933652] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.933789] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.933954] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.934074] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.934223] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.934349] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.934489] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.934626] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.934751] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.934899] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.935098] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.935127] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.935136] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.935143] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.935191] pci 0000:01:04.0: supports D1 D2 |
| [ 0.935283] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.940250] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.940253] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.940258] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.940370] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.940413] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.940449] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref] |
| [ 0.940537] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.940647] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.950653] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.955619] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.955725] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.955757] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.955860] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.955964] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.965959] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.970930] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.971006] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.976052] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 0.981036] pci_bus 0000:00: on NUMA node 0 |
| [ 0.981143] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.987300] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.993462] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.000779] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.008090] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.015398] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.022708] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.028840] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.034995] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.042311] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.049627] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.056919] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.063056] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.069211] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.076510] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.083808] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.091114] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.099691] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.106155] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.112631] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.119099] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.125847] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.130962] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.136628] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.144725] vgaarb: loaded |
| [ 1.147440] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.152926] PCI: Using ACPI for IRQ routing |
| [ 1.157123] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.157181] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.157184] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff] |
| [ 1.157504] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.164554] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.169617] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.178309] Switched to clocksource hpet |
| [ 1.193823] pnp: PnP ACPI init |
| [ 1.196935] ACPI: bus type PNP registered |
| [ 1.201502] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.201582] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.201681] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.201759] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.201798] pnp 00:04: [dma 2] |
| [ 1.201841] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.201863] pnp: PnP ACPI: found 5 devices |
| [ 1.205966] ACPI: bus type PNP unregistered |
| [ 1.218018] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window |
| [ 1.227969] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.232947] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.239048] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.245838] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.253069] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.260298] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.265269] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.272064] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.277034] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.283827] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.288805] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.293777] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.293779] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| [ 1.293782] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| [ 1.293784] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| [ 1.293788] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.293791] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.293793] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.293796] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.293799] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.293802] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.293942] NET: Registered protocol family 2 |
| [ 1.298835] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.306527] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.313869] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.320484] TCP: reno registered |
| [ 1.323741] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.329954] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.336747] NET: Registered protocol family 1 |
| [ 1.341494] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.347572] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.353483] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.359027] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.364523] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.370111] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.375645] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.381162] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.386749] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.392286] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.397792] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.403374] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.408923] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.414425] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.420010] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.425546] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.425554] PCI: CLS 64 bytes, default 64 |
| [ 1.425664] Unpacking initramfs... |
| [ 1.658711] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.666564] PCI-DMA: Disabling AGP. |
| [ 1.671648] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.677231] PCI-DMA: using GART IOMMU. |
| [ 1.680988] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.693025] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.701212] microcode: CPU0: patch_level=0x01000084 |
| [ 1.706107] microcode: CPU1: patch_level=0x01000084 |
| [ 1.711011] microcode: CPU2: patch_level=0x01000084 |
| [ 1.715911] microcode: CPU3: patch_level=0x01000084 |
| [ 1.720816] microcode: CPU4: patch_level=0x01000084 |
| [ 1.725706] microcode: CPU5: patch_level=0x01000084 |
| [ 1.730600] microcode: CPU6: patch_level=0x01000084 |
| [ 1.735496] microcode: CPU7: patch_level=0x01000084 |
| [ 1.740483] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.749280] LVT offset 1 assigned for vector 0x400 |
| [ 1.754094] IBS: LVT offset 1 assigned |
| [ 1.757887] perf: AMD IBS detected (0x00000007) |
| [ 1.763037] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.769427] audit: initializing netlink subsys (disabled) |
| [ 1.774857] audit: type=2000 audit(1448236497.508:1): initialized |
| [ 1.781730] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.788131] zbud: loaded |
| [ 1.791052] VFS: Disk quotas dquot_6.5.2 |
| [ 1.795027] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.801577] msgmni has been set to 9945 |
| [ 1.805961] alg: No test for stdrng (krng) |
| [ 1.810129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.817627] io scheduler noop registered |
| [ 1.821568] io scheduler deadline registered |
| [ 1.825926] io scheduler cfq registered (default) |
| [ 1.830842] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.830966] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.831091] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.831208] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.831369] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.831397] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.831423] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.831449] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.831469] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.838438] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.844973] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.844984] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.851946] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.858479] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.858489] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.865454] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.865464] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.872429] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.872459] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.878074] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.884809] GHES: HEST is not enabled! |
| [ 1.888696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.915287] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.942970] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.950896] Linux agpgart interface v0.103 |
| [ 1.955205] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.965555] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.970544] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.975829] mousedev: PS/2 mouse device common for all mice |
| [ 1.981505] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 1.986625] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 1.993023] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.000891] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.007178] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.013623] AMD IOMMUv2 functionality not available on this system |
| [ 2.019990] TCP: cubic registered |
| [ 2.023452] NET: Registered protocol family 10 |
| [ 2.028293] mip6: Mobile IPv6 |
| [ 2.029597] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.039886] NET: Registered protocol family 17 |
| [ 2.044346] mpls_gso: MPLS GSO support |
| [ 2.048948] registered taskstats version 1 |
| [ 2.053806] rtc_cmos rtc_cmos: setting system clock to 2015-11-22 23:54:59 UTC (1448236499) |
| [ 2.062229] PM: Hibernation image not present or could not be loaded. |
| [ 2.064045] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.071896] Write protecting the kernel read-only data: 8192k |
| [ 2.081129] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.089730] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.113684] systemd-udevd[99]: starting version 215 |
| [ 2.119483] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.150994] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.155991] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.165590] ACPI: bus type USB registered |
| [ 2.169824] usbcore: registered new interface driver usbfs |
| [ 2.169886] PTP clock support registered |
| [ 2.179352] usbcore: registered new interface driver hub |
| [ 2.184914] usbcore: registered new device driver usb |
| [ 2.185046] tg3.c:v3.137 (May 11, 2014) |
| [ 2.185061] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.185272] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.206295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.213509] ehci-pci: EHCI PCI platform driver |
| [ 2.218203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.218351] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.218378] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.218395] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.218444] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.218473] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.229967] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.230055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.230057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.230058] usb usb1: Product: EHCI Host Controller |
| [ 2.230059] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.230061] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.230306] hub 1-0:1.0: USB hub found |
| [ 2.230318] hub 1-0:1.0: 10 ports detected |
| [ 2.291019] ohci-pci: OHCI PCI platform driver |
| [ 2.295764] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.301392] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.308842] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.325159] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.335429] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.345171] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.353001] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.359810] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.365632] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.371959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.378752] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.385974] usb usb2: Product: OHCI PCI host controller |
| [ 2.391208] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.397305] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.402129] hub 2-0:1.0: USB hub found |
| [ 2.405898] hub 2-0:1.0: 10 ports detected |
| [ 2.454435] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.464698] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.474434] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.482263] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.495533] FS-Cache: Loaded |
| [ 2.502613] RPC: Registered named UNIX socket transport module. |
| [ 2.509228] RPC: Registered udp transport module. |
| [ 2.515314] RPC: Registered tcp transport module. |
| [ 2.521405] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.533742] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.547662] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.593947] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.689805] tsc: Refined TSC clocksource calibration: 1909.786 MHz |
| [ 3.693539] Switched to clocksource tsc |
| [ 4.559739] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.566270] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.573159] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.047372] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.061083] systemd[1]: Detected architecture 'x86-64'. |
| [ 5.282461] systemd[1]: Inserted module 'autofs4' |
| [ 5.288494] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 5.372057] random: nonblocking pool is initialized |
| [ 5.528095] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 5.540834] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 5.556230] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 5.572939] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 5.580710] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 5.588319] systemd[1]: Starting Remote File Systems (Pre). |
| [ 5.604832] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 5.610968] systemd[1]: Starting Encrypted Volumes. |
| [ 5.624854] systemd[1]: Reached target Encrypted Volumes. |
| [ 5.630309] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 5.652842] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 5.662279] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 5.670343] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 5.678277] systemd[1]: Starting Paths. |
| [ 5.692802] systemd[1]: Reached target Paths. |
| [ 5.697197] systemd[1]: Starting Swap. |
| [ 5.708799] systemd[1]: Reached target Swap. |
| [ 5.713092] systemd[1]: Starting Root Slice. |
| [ 5.724787] systemd[1]: Created slice Root Slice. |
| [ 5.729522] systemd[1]: Starting User and Session Slice. |
| [ 5.744792] systemd[1]: Created slice User and Session Slice. |
| [ 5.750562] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 5.764868] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 5.770690] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 5.788764] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 5.795747] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 5.812759] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 5.818711] systemd[1]: Starting udev Kernel Socket. |
| [ 5.832757] systemd[1]: Listening on udev Kernel Socket. |
| [ 5.838102] systemd[1]: Starting udev Control Socket. |
| [ 5.852750] systemd[1]: Listening on udev Control Socket. |
| [ 5.858183] systemd[1]: Starting Journal Socket. |
| [ 5.872741] systemd[1]: Listening on Journal Socket. |
| [ 5.877753] systemd[1]: Starting System Slice. |
| [ 5.892728] systemd[1]: Created slice System Slice. |
| [ 5.897633] systemd[1]: Starting system-getty.slice. |
| [ 5.912725] systemd[1]: Created slice system-getty.slice. |
| [ 5.918142] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 5.932718] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 5.939027] systemd[1]: Starting Increase datagram queue length... |
| [ 5.957494] systemd[1]: Starting udev Coldplug all Devices... |
| [ 6.181378] systemd[1]: Starting Load Kernel Modules... |
| [ 6.206208] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 6.212467] systemd[1]: Mounting Debug File System... |
| [ 6.226095] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 6.249953] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 6.265729] systemd[1]: Mounting Huge Pages File System... |
| [ 6.281501] systemd[1]: Starting Slices. |
| [ 6.292658] systemd[1]: Reached target Slices. |
| [ 6.297196] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 6.324655] systemd[1]: Mounted Huge Pages File System. |
| [ 6.340659] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 6.356576] systemd[1]: Mounted Debug File System. |
| [ 6.372567] systemd[1]: Started Increase datagram queue length. |
| [ 6.388630] systemd[1]: Started Load Kernel Modules. |
| [ 6.408599] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 6.428623] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 6.444597] systemd[1]: Started udev Coldplug all Devices. |
| [ 6.490626] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 6.498514] systemd[1]: Starting Load/Save Random Seed... |
| [ 6.513879] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 6.533786] systemd[1]: Starting Apply Kernel Variables... |
| [ 6.549933] systemd[1]: Mounted Configuration File System. |
| [ 6.555577] systemd[1]: Mounted FUSE Control File System. |
| [ 6.561038] systemd[1]: Starting Syslog Socket. |
| [ 6.576575] systemd[1]: Listening on Syslog Socket. |
| [ 6.581546] systemd[1]: Starting Sockets. |
| [ 6.596523] systemd[1]: Reached target Sockets. |
| [ 6.601120] systemd[1]: Starting Journal Service... |
| [ 6.628535] systemd[1]: Started Journal Service. |
| [ 6.764786] systemd-udevd[189]: starting version 215 |
| [ 7.029114] systemd-journald[188]: Received request to flush runtime journal from PID 1 |
| [ 7.478405] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 7.486264] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 7.494538] EDAC MC: Ver: 3.0.0 |
| [ 7.498376] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 7.506664] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 7.506808] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 7.506817] ACPI: Power Button [PWRB] |
| [ 7.506907] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 7.506909] ACPI: Power Button [PWRF] |
| [ 7.537887] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 7.551033] MCE: In-kernel MCE decoding enabled. |
| [ 7.551078] SCSI subsystem initialized |
| [ 7.564101] FDC 0 is a post-1991 82077 |
| [ 7.638431] libata version 3.00 loaded. |
| [ 7.639983] AMD64 EDAC driver v3.4.0 |
| [ 7.643673] EDAC amd64: DRAM ECC enabled. |
| [ 7.647747] EDAC amd64: F10h detected (node 0). |
| [ 7.652410] EDAC MC: DCT0 chip selects: |
| [ 7.652412] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 7.657158] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 7.661811] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 7.666559] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 7.671305] EDAC MC: DCT1 chip selects: |
| [ 7.671308] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 7.671635] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 7.682529] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 7.687279] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 7.692068] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 7.696812] EDAC amd64: using x4 syndromes. |
| [ 7.701033] EDAC amd64: MCT channel count: 2 |
| [ 7.705351] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 7.711277] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 7.716339] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 7.716387] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 7.733060] sata_nv 0000:00:07.0: version 3.5 |
| [ 7.733560] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 7.740302] scsi0 : sata_nv |
| [ 7.744265] scsi1 : sata_nv |
| [ 7.747318] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 7.754501] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 7.762037] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 7.768517] scsi2 : sata_nv |
| [ 7.773161] kvm: Nested Virtualization enabled |
| [ 7.773326] scsi3 : sata_nv |
| [ 7.773499] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 7.773504] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 7.773628] EDAC amd64: DRAM ECC enabled. |
| [ 7.773644] EDAC amd64: F10h detected (node 1). |
| [ 7.773729] EDAC MC: DCT0 chip selects: |
| [ 7.773732] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 7.773733] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 7.773734] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 7.773735] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 7.773736] EDAC MC: DCT1 chip selects: |
| [ 7.773737] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 7.773738] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 7.773739] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 7.773740] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 7.773741] EDAC amd64: using x4 syndromes. |
| [ 7.773742] EDAC amd64: MCT channel count: 1 |
| [ 7.773798] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 7.774014] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 7.774162] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 7.788025] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 7.792819] scsi4 : pata_amd |
| [ 7.793037] scsi5 : pata_amd |
| [ 7.793106] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 7.793107] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 7.894110] kvm: Nested Paging enabled |
| [ 8.071957] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 8.103946] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 8.387849] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 8.703756] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 38.565124] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |