blob: d0d87d573620b12e9e6fdc5088e51c52fad33f53 [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ff9f000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS P2-99/P2-99, BIOS 4.6-2039-gae848f8719 11/08/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ff9f max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0C0000000 mask FE0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x17dfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x179f7000, 0x179f7fff] PGTABLE
[ 0.000000] BRK [0x179f8000, 0x179f9fff] PGTABLE
[ 0.000000] BRK [0x179fa000, 0x179fafff] PGTABLE
[ 0.000000] BRK [0x179fb000, 0x179fbfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1e206000-0x1f325fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F61B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000001FFB00E0 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000001FFB0910 0000F4 (v01 CORE COREBOOT 00000000 CORE 0000002A)
[ 0.000000] ACPI: DSDT 0x000000001FFB0280 000684 (v02 CORE COREBOOT 00000001 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000001FFB0240 000040
[ 0.000000] ACPI: FACS 0x000000001FFB0240 000040
[ 0.000000] ACPI: SSDT 0x000000001FFB0A10 0000C3 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x000000001FFB0AE0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000001FFB0B20 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ff9f000
[ 0.000000] low ram: 0 - 1ff9f000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001ff9efff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ff9efff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ff9efff]
[ 0.000000] On node 0 totalpages: 130877
[ 0.000000] free_area_init_node: node 0, pgdat d77e67c0, node_mem_map dfb1f024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1116 pages used for memmap
[ 0.000000] Normal zone: 126879 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] Found and enabled local APIC!
[ 0.000000] smpboot: Boot CPU (id 0) not listed by BIOS
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @dfb08000 s50764 r0 d31156 u81920
[ 0.000000] pcpu-alloc: s50764 r0 d31156 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129725
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-686-pae root=UUID=8cf9801e-108b-4c75-87cd-6513436e5ba1 ro video=1280x1024@75 iomem=relaxed
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 490584K/523508K available (5825K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 32924K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xe079f000 - 0xff9fe000 ( 498 MB)
lowmem : 0xc0000000 - 0xdff9f000 ( 511 MB)
.init : 0xd7803000 - 0xd78bf000 ( 752 kB)
.data : 0xd75b0b14 - 0xd7801b00 (2371 kB)
.text : 0xd7000000 - 0xd75b0b14 (5826 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=df42e000 soft=df430000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 551.269 MHz processor
[ 0.008041] Calibrating delay loop (skipped), value calculated using timer frequency.. 1102.53 BogoMIPS (lpj=2205076)
[ 0.012081] pid_max: default: 32768 minimum: 301
[ 0.012288] ACPI: Core revision 20160831
[ 0.015434] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.015571] ACPI: setting ELCR to 0200 (from 0000)
[ 0.015827] Security Framework initialized
[ 0.015905] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.016045] AppArmor: AppArmor disabled by boot time parameter
[ 0.016239] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.016325] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.017991] CPU serial number disabled.
[ 0.018096] mce: CPU supports 5 MCE banks
[ 0.018226] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.018306] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.041100] Freeing SMP alternatives memory: 24K
[ 0.048810] ftrace: allocating 24038 entries in 47 pages
[ 0.076650] smpboot: Max logical packages: 1
[ 0.076754] smpboot: SMP motherboard not detected
[ 0.076819] smpboot: SMP disabled
[ 0.076893] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.080000] Performance Events: p6 PMU driver.
[ 0.080000] ... version: 0
[ 0.080000] ... bit width: 32
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 00000000ffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 0000000000000003
[ 0.080423] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080644] x86: Booted up 1 node, 1 CPUs
[ 0.080715] smpboot: Total of 1 processors activated (1102.53 BogoMIPS)
[ 0.081509] devtmpfs: initialized
[ 0.083240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.083352] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.083571] pinctrl core: initialized pinctrl subsystem
[ 0.084564] NET: Registered protocol family 16
[ 0.085979] cpuidle: using governor ladder
[ 0.086052] cpuidle: using governor menu
[ 0.086330] ACPI FADT declares the system doesn't support MSI, so disable it
[ 0.086406] ACPI: bus type PCI registered
[ 0.086475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.086846] PCI: Using configuration type 1 for base access
[ 0.093199] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.094683] ACPI: Added _OSI(Module Device)
[ 0.094768] ACPI: Added _OSI(Processor Device)
[ 0.094836] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.094905] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.095319] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.098471] ACPI: Interpreter enabled
[ 0.098630] ACPI: (supports S0 S1 S5)
[ 0.098698] ACPI: Using PIC for interrupt routing
[ 0.098856] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.105459] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.105563] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[ 0.105660] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.105746] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.106585] PCI host bridge to bus 0000:00
[ 0.106665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.106742] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.106819] pci_bus 0000:00: root bus resource [mem 0x20000000-0xffffffff]
[ 0.106897] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.107011] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.107041] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.107447] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.107768] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.108213] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.108278] pci 0000:00:04.1: reg 0x20: [io 0x1420-0x142f]
[ 0.108311] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.108392] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.108468] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.108544] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.108906] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.108972] pci 0000:00:04.2: reg 0x20: [io 0x1400-0x141f]
[ 0.109271] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.109280] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.109499] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.109592] pci 0000:00:04.3: quirk: [io 0x0f00-0x0f0f] claimed by PIIX4 SMB
[ 0.109964] pci 0000:00:0c.0: [1106:3106] type 00 class 0x020000
[ 0.109995] pci 0000:00:0c.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.110015] pci 0000:00:0c.0: reg 0x14: [mem 0xf2110000-0xf21100ff]
[ 0.110072] pci 0000:00:0c.0: reg 0x30: [mem 0xf2100000-0xf210ffff pref]
[ 0.110132] pci 0000:00:0c.0: supports D1 D2
[ 0.110141] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110622] pci 0000:01:00.0: [10de:0221] type 00 class 0x030000
[ 0.110652] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[ 0.110671] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff pref]
[ 0.110689] pci 0000:01:00.0: reg 0x18: [mem 0xf1000000-0xf1ffffff]
[ 0.110731] pci 0000:01:00.0: reg 0x30: [mem 0xf2000000-0xf201ffff pref]
[ 0.111045] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.111126] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
[ 0.111138] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff pref]
[ 0.111156] pci_bus 0000:00: on NUMA node 0
[ 0.111767] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.112717] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.113613] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.114508] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.116341] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.116427] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.116512] vgaarb: loaded
[ 0.116575] vgaarb: bridge control possible 0000:01:00.0
[ 0.117163] PCI: Using ACPI for IRQ routing
[ 0.117241] PCI: pci_cache_line_size set to 32 bytes
[ 0.117307] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.117316] e820: reserve RAM buffer [mem 0x1ff9f000-0x1fffffff]
[ 0.118717] clocksource: Switched to clocksource refined-jiffies
[ 0.179863] VFS: Disk quotas dquot_6.6.0
[ 0.180166] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.180804] pnp: PnP ACPI init
[ 0.181454] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.181752] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.181934] pnp 00:02: [dma 2]
[ 0.182079] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.182376] system 00:03: [io 0xe400-0xe43f] has been reserved
[ 0.182460] system 00:03: [io 0x0f00-0x0f0f] has been reserved
[ 0.182542] system 00:03: [mem 0xff800000-0xffffffff] has been reserved
[ 0.182626] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.183095] pnp: PnP ACPI: found 4 devices
[ 0.183168] PnPBIOS: Disabled by ACPI PNP
[ 0.230120] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.230277] clocksource: Switched to clocksource acpi_pm
[ 0.230418] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.230503] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
[ 0.230583] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff pref]
[ 0.230683] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.230693] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.230702] pci_bus 0000:00: resource 6 [mem 0x20000000-0xffffffff]
[ 0.230712] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf20fffff]
[ 0.230721] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff pref]
[ 0.231001] NET: Registered protocol family 2
[ 0.232885] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.233034] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.233218] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.233430] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.233534] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.233864] NET: Registered protocol family 1
[ 0.233998] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.234951] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.235027] PCI: setting IRQ 11 as level-triggered
[ 0.235354] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.235445] PCI: CLS 64 bytes, default 32
[ 0.235789] Unpacking initramfs...
[ 2.455154] Freeing initrd memory: 17536K
[ 2.456150] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.457907] audit: initializing netlink subsys (disabled)
[ 2.458094] audit: type=2000 audit(1510155876.455:1): initialized
[ 2.460203] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 2.460396] zbud: loaded
[ 2.464638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.464933] io scheduler noop registered
[ 2.465002] io scheduler deadline registered
[ 2.465145] io scheduler cfq registered (default)
[ 2.465641] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.465748] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.465910] intel_idle: does not run on family 6 model 8
[ 2.466281] GHES: HEST is not enabled!
[ 2.466428] isapnp: Scanning for PnP cards...
[ 2.820881] isapnp: No Plug & Play device found
[ 2.821321] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.842281] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.863140] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 2.864628] Linux agpgart interface v0.103
[ 2.865117] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 2.883346] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.884218] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.886892] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.886990] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.887969] mousedev: PS/2 mouse device common for all mice
[ 2.888431] rtc_cmos rtc_cmos: RTC can wake from S4
[ 2.888909] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.889028] rtc_cmos rtc_cmos: alarms up to one month, 114 bytes nvram
[ 2.889185] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.890351] NET: Registered protocol family 10
[ 2.891747] mip6: Mobile IPv6
[ 2.891831] NET: Registered protocol family 17
[ 2.891907] mpls_gso: MPLS GSO support
[ 2.893081] microcode: sig=0x681, pf=0x1, revision=0xd
[ 2.893369] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.893471] Using IPI No-Shortcut mode
[ 2.894351] registered taskstats version 1
[ 2.894487] zswap: loaded using pool lzo/zbud
[ 2.894802] ima: No TPM chip found, activating TPM-bypass!
[ 2.895564] rtc_cmos rtc_cmos: setting system clock to 2017-11-08 15:44:37 UTC (1510155877)
[ 2.895811] PM: Hibernation image not present or could not be loaded.
[ 2.900316] Freeing unused kernel memory: 752K
[ 2.900921] Write protecting the kernel text: 5828k
[ 2.901253] Write protecting the kernel read-only data: 1724k
[ 2.916582] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.014497] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.015073] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.029979] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.031280] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.034835] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.035549] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.038314] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.038981] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.039559] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.040398] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.233588] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xf00, revision 0
[ 3.246873] Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
[ 3.258790] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 3.259758] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 3.259833] PCI: setting IRQ 10 as level-triggered
[ 3.280449] FDC 0 is a post-1991 82077
[ 3.288636] SCSI subsystem initialized
[ 3.302127] ACPI: bus type USB registered
[ 3.302368] usbcore: registered new interface driver usbfs
[ 3.302510] usbcore: registered new interface driver hub
[ 3.308163] via-rhine 0000:00:0c.0 eth0: VIA Rhine III at 0x11000, 00:11:95:8a:d6:c4, IRQ 10
[ 3.309046] via-rhine 0000:00:0c.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
[ 3.312283] usbcore: registered new device driver usb
[ 3.315855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.334877] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.335463] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 3.335581] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 3.335689] uhci_hcd 0000:00:04.2: detected 2 ports
[ 3.335822] uhci_hcd 0000:00:04.2: irq 11, io base 0x00001400
[ 3.350750] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.350848] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.350935] usb usb1: Product: UHCI Host Controller
[ 3.351005] usb usb1: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 3.351078] usb usb1: SerialNumber: 0000:00:04.2
[ 3.355890] hub 1-0:1.0: USB hub found
[ 3.356137] hub 1-0:1.0: 2 ports detected
[ 3.363909] libata version 3.00 loaded.
[ 3.366287] ata_piix 0000:00:04.1: version 2.13
[ 3.382494] scsi host0: ata_piix
[ 3.391146] scsi host1: ata_piix
[ 3.391634] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1420 irq 14
[ 3.391712] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1428 irq 15
[ 3.456150] tsc: Refined TSC clocksource calibration: 551.249 MHz
[ 3.456254] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7f228947da, max_idle_ns: 440795217959 ns
[ 3.555147] ata1.00: ATA-6: ST310014A, 3.09, max UDMA/100
[ 3.555240] ata1.00: 20005650 sectors, multi 0: LBA
[ 3.559953] ata2.00: ATA-6: Maxtor 32049H2, YAH814Y0, max UDMA/66
[ 3.560137] ata2.00: 40021632 sectors, multi 0: LBA
[ 3.560856] ata1.00: configured for UDMA/33
[ 3.563419] ata2.00: configured for UDMA/33
[ 3.567446] scsi 0:0:0:0: Direct-Access ATA ST310014A 3.09 PQ: 0 ANSI: 5
[ 3.576557] scsi 1:0:0:0: Direct-Access ATA Maxtor 32049H2 14Y0 PQ: 0 ANSI: 5
[ 3.632766] sd 0:0:0:0: [sda] 20005650 512-byte logical blocks: (10.2 GB/9.54 GiB)
[ 3.633177] sd 0:0:0:0: [sda] Write Protect is off
[ 3.633255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.633389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.635656] sd 1:0:0:0: [sdb] 40021632 512-byte logical blocks: (20.5 GB/19.1 GiB)
[ 3.636175] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.636256] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.636391] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.691210] sdb: sdb1 sdb2
[ 3.695210] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.705892] sda: sda1 sda2 sda3
[ 3.708270] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.169718] random: fast init done
[ 4.484253] clocksource: Switched to clocksource tsc
[ 4.572678] PM: Starting manual resume from disk
[ 4.572790] PM: Hibernation image partition 8:2 present
[ 4.572794] PM: Looking for hibernation image.
[ 4.573547] PM: Image not found (code -22)
[ 4.573555] PM: Hibernation image not present or could not be loaded.
[ 5.189619] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.623655] random: crng init done
[ 12.000266] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 12.000382] ACPI: Power Button [PWRF]
[ 12.239716] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 12.601580] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.879935] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.884175] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 13.088816] [drm] Initialized
[ 13.401729] wmi: Mapper loaded
[ 13.907806] nouveau 0000:01:00.0: NVIDIA NV44A (04a100a1)
[ 14.194189] nouveau 0000:01:00.0: bios: version 05.44.a2.10.01
[ 14.199891] agpgart-intel 0000:00:00.0: AGP 1.0 bridge
[ 14.200004] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
[ 14.202327] nouveau 0000:01:00.0: putting AGP V2 device into 2x mode
[ 14.221136] nouveau 0000:01:00.0: fb: 512 MiB DDR2
[ 14.320563] [TTM] Zone kernel: Available graphics memory: 254448 kiB
[ 14.320657] [TTM] Initializing pool allocator
[ 14.320758] [TTM] Initializing DMA pool allocator
[ 14.320948] nouveau 0000:01:00.0: DRM: VRAM: 508 MiB
[ 14.321025] nouveau 0000:01:00.0: DRM: GART: 256 MiB
[ 14.321111] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[ 14.321189] nouveau 0000:01:00.0: DRM: DCB version 3.0
[ 14.321269] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[ 14.321351] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011310 00000028
[ 14.321430] nouveau 0000:01:00.0: DRM: DCB outp 02: 01011312 00000000
[ 14.321511] nouveau 0000:01:00.0: DRM: DCB outp 03: 020223f1 00c0c080
[ 14.321591] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
[ 14.321667] nouveau 0000:01:00.0: DRM: DCB conn 01: 2230
[ 14.321741] nouveau 0000:01:00.0: DRM: DCB conn 02: 0110
[ 14.321816] nouveau 0000:01:00.0: DRM: DCB conn 03: 0111
[ 14.321891] nouveau 0000:01:00.0: DRM: DCB conn 04: 0113
[ 14.325040] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 14.396894] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.396988] [drm] Driver supports precise vblank timestamp query.
[ 14.410981] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 14.411119] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[ 14.529154] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo df07cc00
[ 14.563486] fbcon: nouveaufb (fb0) is primary device
[ 14.697361] Console: switching to colour frame buffer device 160x64
[ 14.815545] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 14.821243] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 19.252025] Adding 1047548k swap on /dev/sda2. Priority:-1 extents:1 across:1047548k FS
[ 19.429073] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 54.740877] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1980.070759] FS-Cache: Loaded
[ 1980.082540] Key type dns_resolver registered
[ 1980.291098] FS-Cache: Netfs 'cifs' registered for caching
[ 1980.291360] Key type cifs.spnego registered
[ 1980.291409] Key type cifs.idmap registered
[ 2093.166263] perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 2209.309388] perf: interrupt took too long (3191 > 3161), lowering kernel.perf_event_max_sample_rate to 62500
[ 2293.184830] perf: interrupt took too long (4040 > 3988), lowering kernel.perf_event_max_sample_rate to 49500
[ 2417.042839] perf: interrupt took too long (5069 > 5050), lowering kernel.perf_event_max_sample_rate to 39250
[ 2620.269415] perf: interrupt took too long (6344 > 6336), lowering kernel.perf_event_max_sample_rate to 31500