blob: a10356c7651fbb9ddd1db8c3b8910347f010f6bb [file] [log] [blame]
[ 0.000000] Linux version 5.17.7-gentoo-dist (root@6af454294235) (i686-pc-linux-gnu-gcc (Gentoo 10.3.0 p1) 10.3.0, GNU ld (Gentoo 2.35.2 p1) 2.35.2) #1 SMP PREEMPT Thu May 12 14:17:38 -00 2022
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] signal: max sigframe size: 1440
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000017f78fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000017f79000-0x0000000017ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUS P2B/P2B, BIOS 4.16-1033-g6acc05ed31 05/16/2022
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 651.505 MHz processor
[ 0.004878] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.004905] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.004937] last_pfn = 0x17f79 max_arch_pfn = 0x100000
[ 0.005218] x86/PAT: PAT not supported by the CPU.
[ 0.006563] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.026799] initial memory mapped: [mem 0x00000000-0x12bfffff]
[ 0.026969] RAMDISK: [mem 0x15a16000-0x16fe4fff]
[ 0.027015] ACPI: Early table checksum verification disabled
[ 0.027040] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4)
[ 0.027072] ACPI: XSDT 0x0000000017F7C0E0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.027112] ACPI: FACP 0x0000000017F7D810 000114 (v06 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.027157] ACPI: DSDT 0x0000000017F7C280 00158A (v02 COREv4 COREBOOT 00000001 INTL 20220331)
[ 0.027190] ACPI: FACS 0x0000000017F7C240 000040
[ 0.027217] ACPI: FACS 0x0000000017F7C240 000040
[ 0.027245] ACPI: SSDT 0x0000000017F7D930 00009B (v02 COREv4 COREBOOT 0000002A CORE 20220331)
[ 0.027278] ACPI: HPET 0x0000000017F7D9D0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.027307] ACPI: Reserving FACP table memory at [mem 0x17f7d810-0x17f7d923]
[ 0.027323] ACPI: Reserving DSDT table memory at [mem 0x17f7c280-0x17f7d809]
[ 0.027337] ACPI: Reserving FACS table memory at [mem 0x17f7c240-0x17f7c27f]
[ 0.027351] ACPI: Reserving FACS table memory at [mem 0x17f7c240-0x17f7c27f]
[ 0.027364] ACPI: Reserving SSDT table memory at [mem 0x17f7d930-0x17f7d9ca]
[ 0.027378] ACPI: Reserving HPET table memory at [mem 0x17f7d9d0-0x17f7da07]
[ 0.027431] 0MB HIGHMEM available.
[ 0.027442] 383MB LOWMEM available.
[ 0.027451] mapped low ram: 0 - 17f79000
[ 0.027461] low ram: 0 - 17f79000
[ 0.027509] Zone ranges:
[ 0.027519] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.027537] Normal [mem 0x0000000001000000-0x0000000017f78fff]
[ 0.027555] HighMem empty
[ 0.027567] Movable zone start for each node
[ 0.027575] Early memory node ranges
[ 0.027583] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.027597] node 0: [mem 0x0000000000100000-0x0000000017f78fff]
[ 0.027613] Initmem setup node 0 [mem 0x0000000000001000-0x0000000017f78fff]
[ 0.027661] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.028193] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.053770] On node 0, zone Normal: 135 pages in unavailable ranges
[ 0.053823] Using APIC driver default
[ 0.053959] ACPI: PM-Timer IO Port: 0xe408
[ 0.053998] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.054040] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.054052] APIC: disable apic facility
[ 0.054060] APIC: switched to apic NOOP
[ 0.054073] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.054129] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.054150] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.054163] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.054175] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.054194] [mem 0x18000000-0xfebfffff] available for PCI devices
[ 0.054209] Booting paravirtualized kernel on bare hardware
[ 0.054234] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.054288] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.055646] percpu: Embedded 32 pages/cpu s102284 r0 d28788 u131072
[ 0.055700] pcpu-alloc: s102284 r0 d28788 u131072 alloc=32*4096
[ 0.055727] pcpu-alloc: [0] 0
[ 0.055851] Built 1 zonelists, mobility grouping on. Total pages: 97112
[ 0.055886] Kernel command line: BOOT_IMAGE=/vmlinuz-5.17.7-gentoo-dist root=UUID=03fb4ed0-8997-4728-b252-6ba87cf84ae4 ro
[ 0.056344] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-5.17.7-gentoo-dist", will be passed to user space.
[ 0.057545] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.058383] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.058566] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.058620] Initializing HighMem for node 0 (00000000:00000000)
[ 0.087179] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.087266] Memory: 344876K/392284K available (12191K kernel code, 1952K rwdata, 3640K rodata, 1000K init, 808K bss, 47408K reserved, 0K cma-reserved, 0K highmem)
[ 0.087303] random: get_random_u32 called from __kmem_cache_create+0x23/0x480 with crng_init=0
[ 0.088539] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.088662] ftrace: allocating 46882 entries in 92 pages
[ 0.126051] ftrace: allocated 92 pages with 4 groups
[ 0.126899] trace event string verifier disabled
[ 0.127179] Dynamic Preempt: voluntary
[ 0.127364] rcu: Preemptible hierarchical RCU implementation.
[ 0.127380] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.127394] Trampoline variant of Tasks RCU enabled.
[ 0.127403] Rude variant of Tasks RCU enabled.
[ 0.127410] Tracing variant of Tasks RCU enabled.
[ 0.127419] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.127430] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.203487] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
[ 0.206329] Console: colour VGA+ 80x25
[ 0.211371] printk: console [tty0] enabled
[ 0.211495] ACPI: Core revision 20211217
[ 0.211903] ACPI: setting ELCR to 0200 (from 0000)
[ 0.212403] hpet: Config register invalid. Disabling HPET
[ 0.212565] APIC: Keep in PIC mode(8259)
[ 0.212633] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x9641cb7dab, max_idle_ns: 440795218413 ns
[ 0.212755] Calibrating delay loop (skipped), value calculated using timer frequency.. 1303.30 BogoMIPS (lpj=2171683)
[ 0.212851] pid_max: default: 32768 minimum: 301
[ 0.213117] LSM: Security Framework initializing
[ 0.213194] Yama: becoming mindful.
[ 0.213413] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.213512] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.215039] CPU serial number disabled.
[ 0.215208] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.215274] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.215354] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.215438] Spectre V2 : Mitigation: Retpolines
[ 0.215496] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.215571] Speculative Store Bypass: Vulnerable
[ 0.215629] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[ 0.215699] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.234393] Freeing SMP alternatives memory: 44K
[ 0.234995] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.235084] smpboot: SMP disabled
[ 0.236311] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.236422] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.236658] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.236870] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.237085] Performance Events:
[ 0.237100] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.237213] no hardware sampling interrupt available.
[ 0.237271] p6 PMU driver.
[ 0.237326] ... version: 0
[ 0.237382] ... bit width: 32
[ 0.237436] ... generic registers: 2
[ 0.237490] ... value mask: 00000000ffffffff
[ 0.237548] ... max period: 000000007fffffff
[ 0.237607] ... fixed-purpose events: 0
[ 0.237661] ... event mask: 0000000000000003
[ 0.238311] rcu: Hierarchical SRCU implementation.
[ 0.241015] smp: Bringing up secondary CPUs ...
[ 0.241103] smp: Brought up 1 node, 1 CPU
[ 0.241163] smpboot: Max logical packages: 1
[ 0.241219] smpboot: Total of 1 processors activated (1303.30 BogoMIPS)
[ 0.241954] devtmpfs: initialized
[ 0.243733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.243852] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.244250] pinctrl core: initialized pinctrl subsystem
[ 0.244868] PM: RTC time: 01:30:10, date: 2022-05-17
[ 0.245831] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.246750] audit: initializing netlink subsys (disabled)
[ 0.247861] thermal_sys: Registered thermal governor 'fair_share'
[ 0.247879] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.247950] thermal_sys: Registered thermal governor 'step_wise'
[ 0.248011] thermal_sys: Registered thermal governor 'user_space'
[ 0.248297] audit: type=2000 audit(1652751010.036:1): state=initialized audit_enabled=0 res=1
[ 0.248515] cpuidle: using governor menu
[ 0.248871] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.249100] ACPI FADT declares the system doesn't support MSI, so disable it
[ 0.249169] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.250594] PCI: PCI BIOS revision 2.10 entry at 0xfd1ea, last bus=1
[ 0.250679] PCI: Using configuration type 1 for base access
[ 0.265358] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.266333] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.267123] cryptd: max_cpu_qlen set to 1000
[ 0.268718] raid6: skipped pq benchmark and selected sse1x2
[ 0.268812] raid6: using intx1 recovery algorithm
[ 0.269193] ACPI: Added _OSI(Module Device)
[ 0.269258] ACPI: Added _OSI(Processor Device)
[ 0.269318] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.269509] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.269576] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.269636] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.269699] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.274551] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.276729] ACPI: Interpreter enabled
[ 0.276877] ACPI: PM: (supports S0 S1 S5)
[ 0.276936] ACPI: Using PIC for interrupt routing
[ 0.277182] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.295562] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.295654] ACPI: PCI: Interrupt link LNKA disabled
[ 0.296040] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.296142] ACPI: PCI: Interrupt link LNKB disabled
[ 0.296530] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.296595] ACPI: PCI: Interrupt link LNKC disabled
[ 0.296978] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.297042] ACPI: PCI: Interrupt link LNKD disabled
[ 0.297464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.297557] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments EDR HPX-Type3]
[ 0.297639] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.297753] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.298572] PCI host bridge to bus 0000:00
[ 0.298640] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.298711] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.298781] pci_bus 0000:00: root bus resource [mem 0x18000000-0xfffbffff]
[ 0.298852] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.298976] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.299061] pci 0000:00:00.0: reg 0x10: [mem 0x20000000-0x2fffffff pref]
[ 0.299681] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.300004] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.300517] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.300640] pci 0000:00:04.1: reg 0x20: [io 0x2120-0x212f]
[ 0.300730] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.300799] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.300865] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.300933] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.301215] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.301338] pci 0000:00:04.2: reg 0x20: [io 0x2100-0x211f]
[ 0.301624] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.301728] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.301885] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.301968] pci 0000:00:04.3: quirk: [io 0x0f00-0x0f0f] claimed by PIIX4 SMB
[ 0.302041] pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297
[ 0.302485] pci 0000:00:0c.0: [1106:3106] type 00 class 0x020000
[ 0.302574] pci 0000:00:0c.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.302651] pci 0000:00:0c.0: reg 0x14: [mem 0x000b0000-0x000b00ff]
[ 0.302794] pci 0000:00:0c.0: reg 0x30: [mem 0x000a0000-0x000affff pref]
[ 0.302927] pci 0000:00:0c.0: supports D1 D2
[ 0.302990] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.303293] pci_bus 0000:01: extended config space not accessible
[ 0.303461] pci 0000:01:00.0: [1002:5960] type 00 class 0x030000
[ 0.303548] pci 0000:01:00.0: reg 0x10: [mem 0x30000000-0x37ffffff pref]
[ 0.303627] pci 0000:01:00.0: reg 0x14: [io 0x1000-0x10ff]
[ 0.303702] pci 0000:01:00.0: reg 0x18: [mem 0x18020000-0x1802ffff]
[ 0.303799] pci 0000:01:00.0: reg 0x30: [mem 0x18000000-0x1801ffff pref]
[ 0.303904] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.304018] pci 0000:01:00.0: supports D1 D2
[ 0.304269] pci 0000:01:00.1: [1002:5940] type 00 class 0x038000
[ 0.304354] pci 0000:01:00.1: reg 0x10: [mem 0x38000000-0x3fffffff pref]
[ 0.304434] pci 0000:01:00.1: reg 0x14: [mem 0x18030000-0x1803ffff]
[ 0.304585] pci 0000:01:00.1: supports D1 D2
[ 0.304848] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.304917] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.304985] pci 0000:00:01.0: bridge window [mem 0x18000000-0x180fffff]
[ 0.305057] pci 0000:00:01.0: bridge window [mem 0x30000000-0x3fffffff pref]
[ 0.305146] pci_bus 0000:00: on NUMA node 0
[ 0.309738] iommu: Default domain type: Translated
[ 0.309825] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.310107] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.310177] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.310259] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.310322] vgaarb: loaded
[ 0.310980] SCSI subsystem initialized
[ 0.311334] libata version 3.00 loaded.
[ 0.311486] ACPI: bus type USB registered
[ 0.311681] usbcore: registered new interface driver usbfs
[ 0.311791] usbcore: registered new interface driver hub
[ 0.311892] usbcore: registered new device driver usb
[ 0.312177] pps_core: LinuxPPS API ver. 1 registered
[ 0.312237] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.312330] PTP clock support registered
[ 0.312757] EDAC MC: Ver: 3.0.0
[ 0.314253] NetLabel: Initializing
[ 0.314332] NetLabel: domain hash size = 128
[ 0.314388] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.314538] NetLabel: unlabeled traffic allowed by default
[ 0.314618] mctp: management component transport protocol core
[ 0.314680] NET: Registered PF_MCTP protocol family
[ 0.314772] PCI: Using ACPI for IRQ routing
[ 0.314836] PCI: pci_cache_line_size set to 32 bytes
[ 0.314892] pci 0000:00:0c.0: can't claim BAR 1 [mem 0x000b0000-0x000b00ff]: no compatible bridge window
[ 0.315001] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.315065] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.315079] e820: reserve RAM buffer [mem 0x17f79000-0x17ffffff]
[ 0.315974] clocksource: Switched to clocksource tsc-early
[ 0.410050] VFS: Disk quotas dquot_6.6.0
[ 0.410214] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.410671] pnp: PnP ACPI init
[ 0.411687] system 00:00: [io 0x0294-0x0297] has been reserved
[ 0.411778] system 00:00: [io 0x03f0-0x03f1] has been reserved
[ 0.411847] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.475916] pnp 00:02: [dma 2]
[ 0.477786] pnp 00:03: [dma 0]
[ 0.482068] pnp: PnP ACPI: found 8 devices
[ 0.525798] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.526316] NET: Registered PF_INET protocol family
[ 0.526806] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.527944] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.528089] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.528238] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.528428] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.528850] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.529002] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.529112] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.529444] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.529960] NET: Registered PF_XDP protocol family
[ 0.530054] pci 0000:00:0c.0: can't claim BAR 6 [mem 0x000a0000-0x000affff pref]: no compatible bridge window
[ 0.530185] pci 0000:00:0c.0: BAR 6: assigned [mem 0x18100000-0x1810ffff pref]
[ 0.530271] pci 0000:00:0c.0: BAR 1: assigned [mem 0x18110000-0x181100ff]
[ 0.530363] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.530429] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.530501] pci 0000:00:01.0: bridge window [mem 0x18000000-0x180fffff]
[ 0.530571] pci 0000:00:01.0: bridge window [mem 0x30000000-0x3fffffff pref]
[ 0.530658] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.530726] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.530794] pci_bus 0000:00: resource 6 [mem 0x18000000-0xfffbffff]
[ 0.530863] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.530928] pci_bus 0000:01: resource 1 [mem 0x18000000-0x180fffff]
[ 0.530996] pci_bus 0000:01: resource 2 [mem 0x30000000-0x3fffffff pref]
[ 0.531195] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.532096] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[ 0.532167] PCI: setting IRQ 11 as level-triggered
[ 0.532449] PCI: CLS 64 bytes, default 32
[ 0.533205] Trying to unpack rootfs image as initramfs...
[ 0.540439] apm: BIOS not found.
[ 0.579075] Initialise system trusted keyrings
[ 0.579220] Key type blacklist registered
[ 0.583670] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.603791] zbud: loaded
[ 0.843696] NET: Registered PF_ALG protocol family
[ 0.843810] xor: measuring software checksum speed
[ 0.850979] pIII_sse : 1406 MB/sec
[ 0.857092] prefetch64-sse : 1636 MB/sec
[ 0.857153] xor: using function: prefetch64-sse (1636 MB/sec)
[ 0.873932] Key type asymmetric registered
[ 0.874038] Asymmetric key parser 'x509' registered
[ 1.059463] random: fast init done
[ 1.542986] tsc: Refined TSC clocksource calibration: 651.477 MHz
[ 1.543106] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x9640241e47, max_idle_ns: 440795210442 ns
[ 1.543254] clocksource: Switched to clocksource tsc
[ 3.456849] Freeing initrd memory: 22332K
[ 3.469566] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 3.469916] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 3.470310] io scheduler mq-deadline registered
[ 3.470377] io scheduler kyber registered
[ 3.470637] io scheduler bfq registered
[ 3.471884] atomic64_test: passed for i586+ platform with CX8 and with SSE
[ 3.473725] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.474058] ACPI: button: Power Button [PWRF]
[ 3.476823] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.477264] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.478543] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.489594] Non-volatile memory driver v1.3
[ 3.489860] Linux agpgart interface v0.103
[ 3.490333] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 3.508617] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x20000000
[ 3.509314] ACPI: bus type drm_connector registered
[ 3.511390] ata_piix 0000:00:04.1: version 2.13
[ 3.513273] scsi host0: ata_piix
[ 3.514173] scsi host1: ata_piix
[ 3.514454] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x2120 irq 14
[ 3.514525] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x2128 irq 15
[ 3.516727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.516832] ehci-pci: EHCI PCI platform driver
[ 3.517576] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.517648] ohci-pci: OHCI PCI platform driver
[ 3.517753] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.518407] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 3.518778] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 3.518879] uhci_hcd 0000:00:04.2: detected 2 ports
[ 3.519039] uhci_hcd 0000:00:04.2: irq 11, io port 0x00002100
[ 3.519564] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17
[ 3.519653] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.519731] usb usb1: Product: UHCI Host Controller
[ 3.519792] usb usb1: Manufacturer: Linux 5.17.7-gentoo-dist uhci_hcd
[ 3.519857] usb usb1: SerialNumber: 0000:00:04.2
[ 3.520501] hub 1-0:1.0: USB hub found
[ 3.520608] hub 1-0:1.0: 2 ports detected
[ 3.521591] usbcore: registered new interface driver usbserial_generic
[ 3.521693] usbserial: USB Serial support registered for generic
[ 3.521965] i8042: PNP: PS/2 Controller [PNP0303:KBD5,PNP0f13:PS25] at 0x60,0x64 irq 1,12
[ 3.524467] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.524562] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.525260] mousedev: PS/2 mouse device common for all mice
[ 3.525850] rtc_cmos 00:01: RTC can wake from S4
[ 3.526951] rtc_cmos 00:01: registered as rtc0
[ 3.527065] rtc_cmos 00:01: setting system clock to 2022-05-17T01:30:13 UTC (1652751013)
[ 3.527242] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 3.527534] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 3.527749] device-mapper: uevent: version 1.0.3
[ 3.528233] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 3.528819] intel_pstate: CPU model not supported
[ 3.529371] hid: raw HID events driver (C) Jiri Kosina
[ 3.529813] usbcore: registered new interface driver usbhid
[ 3.529878] usbhid: USB HID core driver
[ 3.530371] drop_monitor: Initializing network drop monitor service
[ 3.530877] Initializing XFRM netlink socket
[ 3.531640] NET: Registered PF_INET6 protocol family
[ 3.545634] Segment Routing with IPv6
[ 3.545728] RPL Segment Routing with IPv6
[ 3.545850] In-situ OAM (IOAM) with IPv6
[ 3.546226] mip6: Mobile IPv6
[ 3.546287] NET: Registered PF_PACKET protocol family
[ 3.547650] microcode: sig=0x686, pf=0x10, revision=0x8
[ 3.547750] microcode: Microcode Update Driver: v2.2.
[ 3.547770] IPI shorthand broadcast: enabled
[ 3.547922] sched_clock: Marking stable (3540880743, 5237476)->(3549129979, -3011760)
[ 3.548326] registered taskstats version 1
[ 3.548621] Loading compiled-in X.509 certificates
[ 3.549238] zswap: loaded using pool lzo/zbud
[ 3.550182] Key type ._fscrypt registered
[ 3.550262] Key type .fscrypt registered
[ 3.550317] Key type fscrypt-provisioning registered
[ 3.553125] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[ 3.553341] Key type big_key registered
[ 3.565288] Key type encrypted registered
[ 3.565433] ima: No TPM chip found, activating TPM-bypass!
[ 3.565505] ima: Allocated hash algorithm: sha256
[ 3.565629] ima: No architecture policies found
[ 3.565745] evm: Initialising EVM extended attributes:
[ 3.565804] evm: security.selinux
[ 3.565858] evm: security.SMACK64 (disabled)
[ 3.565913] evm: security.SMACK64EXEC (disabled)
[ 3.565969] evm: security.SMACK64TRANSMUTE (disabled)
[ 3.566025] evm: security.SMACK64MMAP (disabled)
[ 3.566242] evm: security.apparmor
[ 3.566299] evm: security.ima
[ 3.566351] evm: security.capability
[ 3.566404] evm: HMAC attrs: 0x1
[ 3.577179] PM: Magic number: 6:850:508
[ 3.577410] pci 0000:00:01.0: hash matches
[ 3.688071] ata1.00: ATA-5: WDC WD400EB-11CPF0, 06.04G06, max UDMA/100
[ 3.688165] ata1.00: 78165360 sectors, multi 0: LBA
[ 3.694614] scsi 0:0:0:0: Direct-Access ATA WDC WD400EB-11CP 4G06 PQ: 0 ANSI: 5
[ 3.695955] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 3.696304] sd 0:0:0:0: [sda] Write Protect is off
[ 3.696374] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.696502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.698106] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.752813] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 3.777993] sda: sda1 sda2 sda3 sda4 sda5
[ 3.789954] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.803055] Freeing unused kernel image (initmem) memory: 1000K
[ 3.803585] Write protecting kernel text and read-only data: 15832k
[ 3.803683] Run /init as init process
[ 3.803742] with arguments:
[ 3.803752] /init
[ 3.803759] with environment:
[ 3.803765] HOME=/
[ 3.803772] TERM=linux
[ 3.803778] BOOT_IMAGE=/vmlinuz-5.17.7-gentoo-dist
[ 3.930260] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[ 3.930382] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.930452] usb 1-1: Product: USB Receiver
[ 3.930511] usb 1-1: Manufacturer: Logitech
[ 3.945769] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.2/usb1/1-1/1-1:1.0/0003:046D:C52B.0001/input/input3
[ 4.000582] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.2-1/input0
[ 4.037822] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:04.2/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input4
[ 4.038623] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:04.2/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input5
[ 4.093506] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:04.2/usb1/1-1/1-1:1.1/0003:046D:C52B.0002/input/input6
[ 4.094133] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.2-1/input1
[ 4.120124] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.2-1/input2
[ 5.900842] Floppy drive(s): fd0 is 1.44M
[ 5.920251] FDC 0 is a post-1991 82077
[ 6.193199] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.2-1/input2
[ 6.340439] input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0000:00/0000:00:04.2/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input10
[ 6.343222] input: Logitech Wireless Device PID:404d Mouse as /devices/pci0000:00/0000:00:04.2/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input11
[ 6.346603] hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:00:04.2-1/input2:1
[ 6.927513] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:04.2/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input15
[ 6.946002] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:04.2-1/input2:1
[ 7.794013] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.
[ 8.239062] dracut: Checking ext4: /dev/disk/by-uuid/03fb4ed0-8997-4728-b252-6ba87cf84ae4
[ 8.240665] dracut: issuing e2fsck -a /dev/disk/by-uuid/03fb4ed0-8997-4728-b252-6ba87cf84ae4
[ 8.375819] dracut: /dev/disk/by-uuid/03fb4ed0-8997-4728-b252-6ba87cf84ae4: clean, 442896/2182992 files, 3694965/8721833 blocks
[ 8.390580] dracut: Mounting /dev/disk/by-uuid/03fb4ed0-8997-4728-b252-6ba87cf84ae4 with -o noatime,ro
[ 8.483099] random: crng init done
[ 8.575377] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.
[ 9.172943] dracut: Mounted root filesystem /dev/sda4
[ 9.705617] dracut: Switching root
[ 24.419312] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xf00, revision 0
[ 24.957289] parport_pc 00:03: reported by Plug and Play ACPI
[ 24.957479] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 25.353854] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 25.605735] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 25.605774] PCI: setting IRQ 10 as level-triggered
[ 25.633803] via-rhine 0000:00:0c.0 eth0: VIA Rhine III at 5998b48b, 00:0d:88:b5:45:8b, IRQ 10
[ 25.634604] via-rhine 0000:00:0c.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
[ 26.677473] [drm] radeon kernel modesetting enabled.
[ 26.677734] radeon 0000:01:00.0: vgaarb: deactivate vga console
[ 26.678552] Console: switching to colour dummy device 80x25
[ 26.696638] [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x1002:0x5960 0x01).
[ 26.696682] [drm] Forcing AGP to PCI mode
[ 26.711819] [drm] Generation 2 PCI interface, using max accessible memory
[ 26.711854] radeon 0000:01:00.0: VRAM: 128M 0x0000000030000000 - 0x0000000037FFFFFF (128M used)
[ 26.711880] radeon 0000:01:00.0: GTT: 512M 0x0000000038000000 - 0x0000000057FFFFFF
[ 26.711958] [drm] Detected VRAM RAM=128M, BAR=128M
[ 26.711968] [drm] RAM width 64bits DDR
[ 26.712126] [drm] radeon: 128M of VRAM memory ready
[ 26.712136] [drm] radeon: 512M of GTT memory ready.
[ 26.712189] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 26.751918] [drm] PCI GART of 512M enabled (table at 0x0000000004400000).
[ 26.752115] radeon 0000:01:00.0: WB disabled
[ 26.752139] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000038000000
[ 26.767689] [drm] radeon: irq initialized.
[ 26.767743] [drm] Loading R200 Microcode
[ 26.767756] Loading firmware: radeon/R200_cp.bin
[ 27.939286] ppdev: user-space parallel port driver
[ 28.223430] [drm] radeon: ring at 0x0000000038001000
[ 28.223491] [drm] ring test succeeded in 0 usecs
[ 28.223652] [drm] ib test succeeded in 0 usecs
[ 28.225106] [drm] Radeon Display Connectors
[ 28.225123] [drm] Connector 0:
[ 28.225129] [drm] VGA-1
[ 28.225134] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 28.225147] [drm] Encoders:
[ 28.225152] [drm] CRT1: INTERNAL_DAC1
[ 28.225159] [drm] Connector 1:
[ 28.225164] [drm] DVI-I-1
[ 28.225169] [drm] HPD1
[ 28.225173] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 28.225186] [drm] Encoders:
[ 28.225190] [drm] CRT2: INTERNAL_DAC2
[ 28.225195] [drm] DFP1: INTERNAL_TMDS1
[ 28.225200] [drm] Connector 2:
[ 28.225205] [drm] SVIDEO-1
[ 28.225210] [drm] Encoders:
[ 28.225214] [drm] TV1: INTERNAL_DAC2
[ 28.342806] [drm] fb mappable at 0x30040000
[ 28.342830] [drm] vram apper at 0x30000000
[ 28.342836] [drm] size 8294400
[ 28.342842] [drm] fb depth is 24
[ 28.342847] [drm] pitch is 7680
[ 28.345412] fbcon: radeondrmfb (fb0) is primary device
[ 28.399881] Console: switching to colour frame buffer device 240x67
[ 28.442574] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[ 28.452866] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 29.069748] EXT4-fs (sda4): re-mounted. Quota mode: none.
[ 30.155714] [drm] amdgpu kernel modesetting enabled.
[ 30.777847] Adding 3145724k swap on /dev/sda3. Priority:-2 extents:1 across:3145724k FS
[ 31.152489] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[ 31.152548] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 31.251324] FAT-fs (sda5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 38.241105] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 39.327804] 8021q: 802.1Q VLAN Support v1.8
[ 39.581598] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 39.600495] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 39.600576] Loading firmware: regulatory.db
[ 39.600878] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 39.600903] cfg80211: failed to load regulatory.db